compressor logic tweaks, battery cab controls, pump sounds

DynObj.cpp

@@ -3782,6 +3782,7 @@ void TDynamicObject::TurnOff()
 // przeliczanie dźwięków, bo będzie słychać bez wyświetlania sektora z pojazdem
 void TDynamicObject::RenderSounds() {
 
+    if( false == simulation::is_ready ) { return; }
     if( Global.iPause != 0 )            { return; }
 
     if( ( m_startjoltplayed )
@@ -5094,11 +5095,25 @@ void TDynamicObject::LoadMMediaFile( std::string const &TypeName, std::string co
                 }
 
                 else if( token == "oilpump:" ) {
-                    // plik z dzwiekiem wentylatora, mnozniki i ofsety amp. i czest.
                     m_powertrainsounds.oil_pump.deserialize( parser, sound_type::single );
                     m_powertrainsounds.oil_pump.owner( this );
                 }
 
+                else if( token == "fuelpump:" ) {
+                    m_powertrainsounds.fuel_pump.deserialize( parser, sound_type::single );
+                    m_powertrainsounds.fuel_pump.owner( this );
+                }
+
+                else if( token == "waterpump:" ) {
+                    m_powertrainsounds.water_pump.deserialize( parser, sound_type::single );
+                    m_powertrainsounds.water_pump.owner( this );
+                }
+
+                else if( token == "waterheater:" ) {
+                    m_powertrainsounds.water_heater.deserialize( parser, sound_type::single );
+                    m_powertrainsounds.water_heater.owner( this );
+                }
+
                 else if( ( token == "tractionmotor:" )
                       && ( MoverParameters->Power > 0 ) ) {
                     // plik z dzwiekiem silnika, mnozniki i ofsety amp. i czest.
@@ -6611,7 +6626,7 @@ TDynamicObject::powertrain_sounds::position( glm::vec3 const Location ) {
     std::vector<sound_source *> enginesounds = {
         &inverter,
         &motor_relay, &dsbWejscie_na_bezoporow, &motor_parallel, &motor_shuntfield, &rsWentylator,
-        &engine, &engine_ignition, &engine_shutdown, &engine_revving, &engine_turbo, &oil_pump, &radiator_fan, &radiator_fan_aux,
+        &engine, &engine_ignition, &engine_shutdown, &engine_revving, &engine_turbo, &oil_pump, &fuel_pump, &water_pump, &water_heater, &radiator_fan, &radiator_fan_aux,
         &transmission, &rsEngageSlippery
     };
     for( auto sound : enginesounds ) {
@@ -6639,7 +6654,36 @@ TDynamicObject::powertrain_sounds::render( TMoverParameters const &Vehicle, doub
     else {
         oil_pump.stop();
     }
-
+    // fuel pump
+    if( true == Vehicle.FuelPump.is_active ) {
+        fuel_pump
+            .pitch( fuel_pump.m_frequencyoffset + fuel_pump.m_frequencyfactor * 1.f )
+            .gain( fuel_pump.m_amplitudeoffset + fuel_pump.m_amplitudefactor * 1.f )
+            .play( sound_flags::exclusive | sound_flags::looping );
+    }
+    else {
+        fuel_pump.stop();
+    }
+    // water pump
+    if( true == Vehicle.WaterPump.is_active ) {
+        water_pump
+            .pitch( water_pump.m_frequencyoffset + water_pump.m_frequencyfactor * 1.f )
+            .gain( water_pump.m_amplitudeoffset + water_pump.m_amplitudefactor * 1.f )
+            .play( sound_flags::exclusive | sound_flags::looping );
+    }
+    else {
+        water_pump.stop();
+    }
+    // water heater
+    if( true == Vehicle.WaterHeater.is_active ) {
+        water_heater
+            .pitch( water_heater.m_frequencyoffset + water_heater.m_frequencyfactor * 1.f )
+            .gain( water_heater.m_amplitudeoffset + water_heater.m_amplitudefactor * 1.f )
+            .play( sound_flags::exclusive | sound_flags::looping );
+    }
+    else {
+        water_heater.stop();
+    }
     // engine sounds
     // ignition
     if( engine_state_last != Vehicle.Mains ) {

DynObj.h

@@ -369,6 +369,9 @@ private:
         sound_source engine_turbo { sound_placement::engine };
         double engine_turbo_pitch { 1.0 };
         sound_source oil_pump { sound_placement::engine };
+        sound_source fuel_pump { sound_placement::engine };
+        sound_source water_pump { sound_placement::engine };
+        sound_source water_heater { sound_placement::engine };
         sound_source radiator_fan { sound_placement::engine };
         sound_source radiator_fan_aux { sound_placement::engine };
         sound_source transmission { sound_placement::engine };

McZapkie/MOVER.h

@@ -1281,6 +1281,7 @@ public:
 	bool CompressorAllow = false;            /*! zezwolenie na uruchomienie sprezarki  NBMX*/
     bool CompressorAllowLocal{ true }; // local device state override (most units don't have this fitted so it's set to true not to intefere)
     bool CompressorGovernorLock{ false }; // indicates whether compressor pressure switch was activated due to reaching cut-out pressure
+    bool CompressorTankValve{ false }; // indicates excessive pressure is vented from compressor tank directly and instantly
     start_t CompressorStart{ start_t::manual }; // whether the compressor is started manually, or another way
     start_t PantographCompressorStart{ start_t::manual };
     // TODO converter parameters, for when we start cleaning up mover parameters

McZapkie/Mover.cpp

@@ -3707,6 +3707,8 @@ void TMoverParameters::CompressorCheck(double dt) {
 
     CompressedVolume = std::max( 0.0, CompressedVolume - dt * AirLeakRate * 0.1 ); // nieszczelności: 0.001=1l/s
 
+    Compressor = CompressedVolume / VeselVolume;
+
     // assorted operational logic
     auto const MaxCompressorF { CompressorList[ TCompressorList::cl_MaxFactor ][ CompressorListPos ] * MaxCompressor };
     auto const MinCompressorF { CompressorList[ TCompressorList::cl_MinFactor ][ CompressorListPos ] * MinCompressor };
@@ -3792,7 +3794,8 @@ void TMoverParameters::CompressorCheck(double dt) {
                 CompressorSpeedF
                 * ( 2.0 * MaxCompressorF - Compressor ) / MaxCompressorF
                 * enginefactor
-                * dt;
+                * dt
+                * ( CompressorGovernorLock ? 0.0 : 1.0 ); // with the lock active air is vented out
             break;
         }
         default: {
@@ -3806,10 +3809,16 @@ void TMoverParameters::CompressorCheck(double dt) {
     }
 
     if( ( pressureistoohigh )
-     && ( false == governorlockispresent ) ) {
+     && ( ( false == governorlockispresent ) || ( CompressorPower == 3 ) ) ) {
         // vent some air out if there's no governor lock to stop the compressor from exceeding acceptable pressure level
         SetFlag( SoundFlag, sound::relay | sound::loud );
-        CompressedVolume *= 0.8;
+        CompressedVolume *= (
+            false == governorlockispresent ? 0.80 : // arbitrary amount
+            CompressorTankValve ? MinCompressorF / MaxCompressorF : // drop to mincompressor level
+            0.999 ); // HACK: drop a tiny bit so the sound doesn't trigger repeatedly
+        if( ( false == governorlockispresent ) || ( CompressorTankValve ) ) {
+            CompressorGovernorLock = false;
+        }
     }
 
     // tymczasowo tylko obciążenie sprężarki, tak z 5A na sprężarkę
@@ -9221,6 +9230,7 @@ void TMoverParameters::LoadFIZ_Brake( std::string const &line ) {
 */
     extract_value( MinCompressor, "MinCP", line, "" );
     extract_value( MaxCompressor, "MaxCP", line, "" );
+    extract_value( CompressorTankValve, "CompressorTankValve", line, "" );
     extract_value( CompressorSpeed, "CompressorSpeed", line, "" );
 	extract_value( EmergencyValveOff, "MinEVP", line, "" );
 	extract_value( EmergencyValveOn, "MaxEVP", line, "" );

Train.cpp

@@ -1932,7 +1932,8 @@ void TTrain::OnCommand_batteryenable( TTrain *Train, command_data const &Command
 
     if( Command.action == GLFW_PRESS ) {
         // visual feedback
-        Train->ggBatteryButton.UpdateValue( 1.0, Train->dsbSwitch );
+        Train->ggBatteryButton.UpdateValue( 1.0f, Train->dsbSwitch );
+        Train->ggBatteryOnButton.UpdateValue( 1.0f, Train->dsbSwitch );
 
         if( true == Train->mvOccupied->Battery ) { return; } // already on
 
@@ -1953,6 +1954,7 @@ void TTrain::OnCommand_batteryenable( TTrain *Train, command_data const &Command
             // return the switch to neutral position
             Train->ggBatteryButton.UpdateValue( 0.5f );
         }
+        Train->ggBatteryOnButton.UpdateValue( 0.0f, Train->dsbSwitch );
     }
 }
 
@@ -1960,7 +1962,8 @@ void TTrain::OnCommand_batterydisable( TTrain *Train, command_data const &Comman
     // TBD, TODO: ewentualnie zablokować z FIZ, np. w samochodach się nie odłącza akumulatora
     if( Command.action == GLFW_PRESS ) {
         // visual feedback
-        Train->ggBatteryButton.UpdateValue( 0.0, Train->dsbSwitch );
+        Train->ggBatteryButton.UpdateValue( 0.0f, Train->dsbSwitch );
+        Train->ggBatteryOffButton.UpdateValue( 1.0f, Train->dsbSwitch );
 
         if( false == Train->mvOccupied->Battery ) { return; } // already off
 
@@ -1978,6 +1981,7 @@ void TTrain::OnCommand_batterydisable( TTrain *Train, command_data const &Comman
             // return the switch to neutral position
             Train->ggBatteryButton.UpdateValue( 0.5f );
         }
+        Train->ggBatteryOffButton.UpdateValue( 0.0f, Train->dsbSwitch );
     }
 }
 
@@ -2279,10 +2283,11 @@ void TTrain::OnCommand_pantographlowerall( TTrain *Train, command_data const &Co
 
 void TTrain::OnCommand_pantographcompressorvalvetoggle( TTrain *Train, command_data const &Command ) {
 
-    if( ( Train->mvControlled->TrainType == dt_EZT ?
+    if( ( Train->ggPantCompressorValve.SubModel == nullptr )
+     && ( Train->mvControlled->TrainType == dt_EZT ?
             ( Train->mvControlled != Train->mvOccupied ) :
             ( Train->iCabn != 0 ) ) ) {
-        // tylko w maszynowym
+        // tylko w maszynowym, unless actual device is present
         return;
     }
 
@@ -2305,7 +2310,8 @@ void TTrain::OnCommand_pantographcompressorvalvetoggle( TTrain *Train, command_d
 
 void TTrain::OnCommand_pantographcompressoractivate( TTrain *Train, command_data const &Command ) {
 
-    if( ( Train->mvControlled->TrainType == dt_EZT ?
+    if( ( Train->ggPantCompressorValve.SubModel == nullptr )
+     && ( Train->mvControlled->TrainType == dt_EZT ?
             ( Train->mvControlled != Train->mvOccupied ) :
             ( Train->iCabn != 0 ) ) ) {
         // tylko w maszynowym
@@ -6737,6 +6743,8 @@ bool TTrain::Update( double const Deltatime )
         ggCabLightButton.Update();
         ggCabLightDimButton.Update();
         ggBatteryButton.Update();
+        ggBatteryOnButton.Update();
+        ggBatteryOffButton.Update();
 
         ggWaterPumpBreakerButton.Update();
         ggWaterPumpButton.Update();
@@ -7942,6 +7950,8 @@ void TTrain::clear_cab_controls()
     ggCabLightButton.Clear();
     ggCabLightDimButton.Clear();
     ggBatteryButton.Clear();
+    ggBatteryOnButton.Clear();
+    ggBatteryOffButton.Clear();
     //-------
     ggFuseButton.Clear();
     ggConverterFuseButton.Clear();
@@ -8529,7 +8539,8 @@ bool TTrain::initialize_button(cParser &Parser, std::string const &Label, int co
     std::unordered_map<std::string, bool const *> const autolights = {
         { "i-doorpermit_left:",  &mvOccupied->Doors.instances[ ( cab_to_end() == end::front ? side::left : side::right ) ].open_permit },
         { "i-doorpermit_right:", &mvOccupied->Doors.instances[ ( cab_to_end() == end::front ? side::right : side::left ) ].open_permit },
-        { "i-doorstep:", &mvOccupied->Doors.step_enabled }
+        { "i-doorstep:", &mvOccupied->Doors.step_enabled },
+        { "i-mainpipelock:", &mvOccupied->LockPipe }
     };
     {
         auto lookup = autolights.find( Label );
@@ -8688,6 +8699,8 @@ bool TTrain::initialize_gauge(cParser &Parser, std::string const &Label, int con
         { "cablight_sw:", ggCabLightButton },
         { "cablightdim_sw:", ggCabLightDimButton },
         { "battery_sw:", ggBatteryButton },
+        { "batteryon_sw:", ggBatteryOnButton },
+        { "batteryoff_sw:", ggBatteryOffButton },
         { "distancecounter_sw:", ggDistanceCounterButton },
         { "universal0:", ggUniversals[ 0 ] },
         { "universal1:", ggUniversals[ 1 ] },

Train.h

@@ -512,6 +512,8 @@ public: // reszta może by?publiczna
     TGauge ggCabLightButton; // hunter-091012: przelacznik oswietlania kabiny
     TGauge ggCabLightDimButton; // hunter-091012: przelacznik przyciemnienia
     TGauge ggBatteryButton; // Stele 161228 hebelek baterii
+    TGauge ggBatteryOnButton;
+    TGauge ggBatteryOffButton;
     // oswietlenia kabiny
 
     // NBMX wrzesien 2003 - obsluga drzwi

drivermouseinput.cpp

@@ -821,6 +821,12 @@ drivermouse_input::default_bindings() {
         { "battery_sw:", {
             user_command::batterytoggle,
             user_command::none } },
+        { "batteryon_sw:", {
+            user_command::batteryenable,
+            user_command::none } },
+        { "batteryoff_sw:", {
+            user_command::batterydisable,
+            user_command::none } },
         { "universal0:", {
             user_command::generictoggle0,
             user_command::none } },

translation.cpp

@@ -178,6 +178,8 @@ init() {
         "interior light",
         "interior light dimmer",
         "battery",
+        "battery",
+        "battery",
         "interactive part",
         "interactive part",
         "interactive part",
@@ -346,6 +348,8 @@ init() {
         "oswietlenie kabiny",
         "przyciemnienie oswietlenia kabiny",
         "bateria",
+        "bateria",
+        "bateria",
         "element ruchomy",
         "element ruchomy",
         "element ruchomy",
@@ -467,6 +471,8 @@ init() {
             "cablight_sw:",
             "cablightdim_sw:",
             "battery_sw:",
+            "batteryon_sw:",
+            "batteryoff_sw:",
             "universal0:",
             "universal1:",
             "universal2:",

translation.h

@@ -167,6 +167,8 @@ enum string {
     cab_cablight_sw,
     cab_cablightdim_sw,
     cab_battery_sw,
+    cab_batteryon_sw,
+    cab_batteryoff_sw,
     cab_universal0,
     cab_universal1,
     cab_universal2,