18
0
mirror of https://github.com/MaSzyna-EU07/maszyna.git synced 2026-11-20 16:14:58 +01:00

fix: behind a line breaker closed ahead of the pantographs the main circuit still needs the voltage

Review of #272. The closed line breaker used to mean there's traction
voltage, the undervoltage trip opening it without one. With
PantRequiresMain=Yes it closes on the battery and holds without voltage,
so everything that took Mains for "the main circuit is live" ran with the
pantographs down, lowered for a section, or under a dead catenary.

- MainCircuitPowered(): the line breaker closed, and on a vehicle with
  PantRequiresMain and current collectors also the voltage at least MinV
  (what the undervoltage trip takes). For every other vehicle it is Mains.
  It feeds the converter (and through it the 110 V and a compressor on
  it), a compressor on the main circuit, the heating from the main
  circuit, the motor blowers, the blowers of the starting resistors, the
  current of the series motors and the induction motor drive.
- The undervoltage relay of such a vehicle opens the line contactors, as
  the line breaker opening did elsewhere: the camshaft goes back to zero
  and the motors get no current, also not the generator current a closed
  circuit without voltage gave. The relay picks up again with the voltage
  back and the master controller at zero or the first position, so the
  start begins anew instead of the camshaft running back up to the
  position left on the controller.

Vehicles without the key are unchanged: the golden traces recorded before
the change compare exactly.
This commit is contained in:
jerrrrycho
2026-11-11 21:54:20 +01:00
parent c09c44f978
commit 226eaabb7b
3 changed files with 287 additions and 16 deletions

View File

@@ -2165,7 +2165,8 @@ class TMoverParameters
bool JointEngineStart{true}; bool JointEngineStart{true};
// config, .fiz Cntrl.PantRequiresMain: the line breaker closes without traction voltage and holds without it, and the // config, .fiz Cntrl.PantRequiresMain: the line breaker closes without traction voltage and holds without it, and the
// pantographs rise and stay up only while it's closed (EU05, EP05, ČD 181 family); off, the pantographs come first and the line // pantographs rise and stay up only while it's closed (EU05, EP05, ČD 181 family); off, the pantographs come first and the line
// breaker needs their voltage // breaker needs their voltage. what the main circuit feeds still needs the voltage (MainCircuitPowered()), and without
// it the undervoltage relay opens the line contactors (NoVoltRelay)
bool PantographsRequireMains{false}; bool PantographsRequireMains{false};
bool LineBreakerClosesOnlyAtNoPowerPos{false}; bool LineBreakerClosesOnlyAtNoPowerPos{false};
bool ControlPressureSwitch{false}; // activates if the main pipe and/or brake cylinder pressure aren't within operational levels bool ControlPressureSwitch{false}; // activates if the main pipe and/or brake cylinder pressure aren't within operational levels
@@ -2232,7 +2233,9 @@ class TMoverParameters
double PantPress = 0.0; /*Cisnienie w zbiornikach pantografow*/ double PantPress = 0.0; /*Cisnienie w zbiornikach pantografow*/
bool PantPressSwitchActive{false}; // state of the pantograph pressure switch. gets primed at defined pressure level in pantograph air system bool PantPressSwitchActive{false}; // state of the pantograph pressure switch. gets primed at defined pressure level in pantograph air system
bool PantPressLockActive{false}; // pwr system state flag. fires when pressure switch activates by pantograph pressure dropping below defined level bool PantPressLockActive{false}; // pwr system state flag. fires when pressure switch activates by pantograph pressure dropping below defined level
bool NoVoltRelay{true}; // switches off if the power level drops below threshold // switches off if the power level drops below threshold, which opens the line breaker; with PantographsRequireMains
// it opens the line contactors instead, and switches back on only with the master controller at zero or the first position
bool NoVoltRelay{true};
bool OvervoltageRelay{true}; // switches off if the power level goes above threshold bool OvervoltageRelay{true}; // switches off if the power level goes above threshold
bool s_CAtestebrake = false; // hunter-091012: zmienna dla testu ca bool s_CAtestebrake = false; // hunter-091012: zmienna dla testu ca
std::array<std::pair<double, double>, 4> PowerCircuits; // 24v, 110v, 3x400v and 3000v power circuits, voltage from local sources and current draw pairs std::array<std::pair<double, double>, 4> PowerCircuits; // 24v, 110v, 3x400v and 3000v power circuits, voltage from local sources and current draw pairs
@@ -2661,6 +2664,11 @@ class TMoverParameters
bool HeatingSwitch(bool const State, range_t const Notify = range_t::consist); bool HeatingSwitch(bool const State, range_t const Notify = range_t::consist);
void HeatingSwitch_(bool const State); void HeatingSwitch_(bool const State);
double EnginePowerSourceVoltage() const; // returns voltage of defined main engine power source double EnginePowerSourceVoltage() const; // returns voltage of defined main engine power source
// whether the main circuit feeds what runs on it (the converter, a compressor, the heating, the motor and resistor
// blowers, the traction motors): the line breaker closed, and where it closes ahead of the pantographs and holds
// without traction voltage (PantographsRequireMains) also the voltage there, at least the one the undervoltage
// trip takes. everywhere else it's the same as Mains
bool MainCircuitPowered() const;
/*-funkcje typowe dla lokomotywy elektrycznej*/ /*-funkcje typowe dla lokomotywy elektrycznej*/
void LowVoltagePowerCheck(double const Deltatime); void LowVoltagePowerCheck(double const Deltatime);

View File

@@ -438,7 +438,7 @@ double TMoverParameters::Current(double n, double U)
// writepaslog("Delta ", FloatToStr(Delta)); // writepaslog("Delta ", FloatToStr(Delta));
// writepaslog("DeltaQ ", FloatToStr(DeltaQ)); // writepaslog("DeltaQ ", FloatToStr(DeltaQ));
// writepaslog("U ", FloatToStr(U)); // writepaslog("U ", FloatToStr(U));
if (Mains) if (MainCircuitPowered())
{ {
if (U > 0) if (U > 0)
MotorCurrent = (U1 - Isf * Rz - Mn * motor_param(SP).fi * n + std::sqrt(Delta)) / (2.0 * Rz); MotorCurrent = (U1 - Isf * Rz - Mn * motor_param(SP).fi * n + std::sqrt(Delta)) / (2.0 * Rz);
@@ -1952,7 +1952,7 @@ void TMoverParameters::PowerCouplersCheck(double const /*Deltatime*/, coupling c
case TPowerSource::Main: case TPowerSource::Main:
{ {
// HACK: main circuit can be fed through couplers, so we explicitly check pantograph supply here // HACK: main circuit can be fed through couplers, so we explicitly check pantograph supply here
localvoltage = true == Mains ? PantographVoltage : 0.0; localvoltage = MainCircuitPowered() ? PantographVoltage : 0.0;
break; break;
} }
default: default:
@@ -2209,7 +2209,7 @@ void TMoverParameters::ConverterCheck(double const Timestep)
if (ConverterAllow && ConverterAllowLocal && false == ConvOvldFlag && if (ConverterAllow && ConverterAllowLocal && false == ConvOvldFlag &&
false == PantPressLockActive false == PantPressLockActive
// HACK: allow carriages to operate converter without (missing) fuse prerequisite // HACK: allow carriages to operate converter without (missing) fuse prerequisite
&& (Power > 1.0 ? Mains : GetTrainsetHighVoltage() > 0.0)) && (Power > 1.0 ? MainCircuitPowered() : GetTrainsetHighVoltage() > 0.0))
{ {
// delay timer can be optionally configured, and is set anew whenever converter goes off // delay timer can be optionally configured, and is set anew whenever converter goes off
if (ConverterStartDelayTimer <= 0.0) if (ConverterStartDelayTimer <= 0.0)
@@ -2295,7 +2295,7 @@ void TMoverParameters::HeatingCheck(double const /*Timestep*/)
} }
case TPowerSource::Main: case TPowerSource::Main:
{ {
voltage = true == Mains ? std::max(GetTrainsetHighVoltage(), PantographVoltage) : 0.0; voltage = MainCircuitPowered() ? std::max(GetTrainsetHighVoltage(), PantographVoltage) : 0.0;
break; break;
} }
default: default:
@@ -2406,7 +2406,7 @@ void TMoverParameters::MotorBlowersCheck(double const Timestep)
// TODO: bind properly power source when ld is in place // TODO: bind properly power source when ld is in place
(blower.start_type == start_t::battery ? Power24vIsAvailable : (blower.start_type == start_t::battery ? Power24vIsAvailable :
blower.start_type == start_t::converter ? Power110vIsAvailable : blower.start_type == start_t::converter ? Power110vIsAvailable :
Mains) // power source MainCircuitPowered()) // power source
// breaker condition disabled until it's implemented in the class data // breaker condition disabled until it's implemented in the class data
// && ( true == blower.breaker ) // && ( true == blower.breaker )
&& false == disable && && false == disable &&
@@ -3980,6 +3980,25 @@ double TMoverParameters::EnginePowerSourceVoltage() const
0.0; 0.0;
} }
// whether the main circuit feeds what runs on it: the converter, a compressor, the heating, the motor and resistor
// blowers, the traction motors
bool TMoverParameters::MainCircuitPowered() const
{
if (false == Mains)
{
return false;
}
if (false == PantographsRequireMains || EnginePowerSource.SourceType != TPowerSource::CurrentCollector)
{
// the closed line breaker says it all: the undervoltage trip opens it without traction voltage, and an engine
// which runs is its own supply
return true;
}
// closed ahead of the pantographs the line breaker holds without the voltage, which the undervoltage trip isn't
// there to vouch for
return EnginePowerSourceVoltage() >= EnginePowerSource.CollectorParameters.MinV;
}
// ************************************************************************************************* // *************************************************************************************************
// Q: 20160711 // Q: 20160711
// zwiększenie nastawy hamulca // zwiększenie nastawy hamulca
@@ -4573,7 +4592,7 @@ void TMoverParameters::CompressorCheck(double dt)
} }
// the main circuit, also for a compressor driven by the engine, otherwise the low voltage // the main circuit, also for a compressor driven by the engine, otherwise the low voltage
auto const compressorpower{CompressorPower == 0 || CompressorPower == 3 ? Mains : Power110vIsAvailable}; auto const compressorpower{CompressorPower == 0 || CompressorPower == 3 ? MainCircuitPowered() : Power110vIsAvailable};
CompressorPowerTime = compressorpower ? CompressorPowerTime + dt : 0.0; CompressorPowerTime = compressorpower ? CompressorPowerTime + dt : 0.0;
auto const compressorready{compressorpower && CompressorPowerTime >= CompressorStartDelay}; auto const compressorready{compressorpower && CompressorPowerTime >= CompressorStartDelay};
// TBD: split CompressorAllow into separate enable/disable flags, inherit compressor from basic_device // TBD: split CompressorAllow into separate enable/disable flags, inherit compressor from basic_device
@@ -5910,7 +5929,7 @@ double TMoverParameters::TractionForce(double dt)
case TEngineType::ElectricSeriesMotor: case TEngineType::ElectricSeriesMotor:
{ {
if (true == Mains) if (MainCircuitPowered())
{ {
switch (RVentType) switch (RVentType)
{ {
@@ -6042,7 +6061,13 @@ double TMoverParameters::TractionForce(double dt)
{ {
// update the state of voltage relays // update the state of voltage relays
auto const voltage{std::max(GetTrainsetHighVoltage(), PantographVoltage)}; auto const voltage{std::max(GetTrainsetHighVoltage(), PantographVoltage)};
NoVoltRelay = EnginePowerSource.SourceType != TPowerSource::CurrentCollector || voltage >= EnginePowerSource.CollectorParameters.MinV; // where the line breaker holds without voltage (closed ahead of the pantographs) the undervoltage relay opens the
// line contactors instead, see MotorConnectorsCheck(). it picks up again only with the master controller back
// where a start begins, as the line breaker it stands in for wouldn't close on a running position either: at
// zero, or at the first position, which is the first resistance step, where the line contactors close on any
// start, and where the AI waits for them rather than going back to zero
auto const novoltrelaypicksup{false == PantographsRequireMains || NoVoltRelay || MainCtrlPowerPos() <= 1};
NoVoltRelay = EnginePowerSource.SourceType != TPowerSource::CurrentCollector || (voltage >= EnginePowerSource.CollectorParameters.MinV && novoltrelaypicksup);
OvervoltageRelay = OvervoltageRelay =
EnginePowerSource.SourceType != TPowerSource::CurrentCollector || voltage <= EnginePowerSource.CollectorParameters.MaxV || false == EnginePowerSource.CollectorParameters.OVP; EnginePowerSource.SourceType != TPowerSource::CurrentCollector || voltage <= EnginePowerSource.CollectorParameters.MaxV || false == EnginePowerSource.CollectorParameters.OVP;
// wywalanie szybkiego z powodu niewłaściwego napięcia // wywalanie szybkiego z powodu niewłaściwego napięcia
@@ -6578,7 +6603,7 @@ double TMoverParameters::TractionForce(double dt)
case TEngineType::ElectricInductionMotor: case TEngineType::ElectricInductionMotor:
{ {
if (true == Mains && !SecuritySystem.is_engine_blocked()) if (MainCircuitPowered() && !SecuritySystem.is_engine_blocked())
{ {
double ActiveInverters = 0.0; double ActiveInverters = 0.0;
for (auto const &inv : Inverters) for (auto const &inv : Inverters)
@@ -7496,7 +7521,11 @@ bool TMoverParameters::MotorConnectorsCheck()
return false; return false;
} }
auto const connectorsoff{false == Mains || true == FuseFlag || true == StLinSwitchOff || DirActive == 0}; // a line breaker closed ahead of the pantographs holds without voltage; what cuts the motors off there is its
// undervoltage relay, which elsewhere opens the line breaker
auto const undervoltage{PantographsRequireMains && false == NoVoltRelay};
auto const connectorsoff{false == Mains || undervoltage || true == FuseFlag || true == StLinSwitchOff || DirActive == 0};
return false == connectorsoff; return false == connectorsoff;
} }
@@ -7871,7 +7900,7 @@ void TMoverParameters::CheckEIMIC(double dt)
eimic = 0; eimic = 0;
} }
auto const eimicpowerenabled{(true == Mains || Power == 0.0) && (!SpringBrake.IsActive || !SpringBrakeCutsOffDrive) && !LockPipe && DirAbsolute != 0}; auto const eimicpowerenabled{(MainCircuitPowered() || Power == 0.0) && (!SpringBrake.IsActive || !SpringBrakeCutsOffDrive) && !LockPipe && DirAbsolute != 0};
auto const eimicdoorenabled{(SpringBrake.IsActive && ReleaseParkingBySpringBrakeWhenDoorIsOpen)}; auto const eimicdoorenabled{(SpringBrake.IsActive && ReleaseParkingBySpringBrakeWhenDoorIsOpen)};
double eimic_max = 0.0; double eimic_max = 0.0;
if (Doors.instances[side::left].open_permit == false && Doors.instances[side::right].open_permit == false) if (Doors.instances[side::left].open_permit == false && Doors.instances[side::right].open_permit == false)

View File

@@ -4,11 +4,16 @@
// the order of the line breaker and the pantographs (eu07/maszyna#68): on Polish locomotives the pantographs // the order of the line breaker and the pantographs (eu07/maszyna#68): on Polish locomotives the pantographs
// come first and the line breaker closes on their voltage; on Czech ones (Cntrl.PantRequiresMain) the line // come first and the line breaker closes on their voltage; on Czech ones (Cntrl.PantRequiresMain) the line
// breaker closes first, without voltage, and the pantographs rise and stay up only while it's closed // breaker closes first, without voltage, and the pantographs rise and stay up only while it's closed. what the
// main circuit feeds still needs the voltage there: the converter and the rest don't run behind a line breaker
// closed on the battery alone, and the traction motors get cut off when the voltage goes
namespace { namespace {
constexpr test::track line{0.15, 0.0, test::catenary_3kv}; constexpr test::track line{0.15, 0.0, test::catenary_3kv};
// a catenary without voltage, and one below the voltage the locomotive works on (Power: MinV, 1900 V)
constexpr test::track dead{0.15, 0.0, 0.0};
constexpr test::track weak{0.15, 0.0, 1000.0};
test::definition ep05(bool const Mainsfirst) { test::definition ep05(bool const Mainsfirst) {
auto definition{test::definition::fiz("ep05_v2/ep05")}; auto definition{test::definition::fiz("ep05_v2/ep05")};
@@ -32,10 +37,10 @@ void prepare(test::vehicle &Loco) {
Loco.run(2.0, line); Loco.run(2.0, line);
} }
void raise_pantograph(test::vehicle &Loco) { void raise_pantograph(test::vehicle &Loco, test::track const &Track = line) {
Loco->OperatePantographsValve(operation_t::enable); Loco->OperatePantographsValve(operation_t::enable);
Loco->OperatePantographValve(end::rear, operation_t::enable); Loco->OperatePantographValve(end::rear, operation_t::enable);
Loco.run(5.0, line); Loco.run(5.0, Track);
} }
void close_line_breaker(test::vehicle &Loco) { void close_line_breaker(test::vehicle &Loco) {
@@ -43,6 +48,42 @@ void close_line_breaker(test::vehicle &Loco) {
Loco.run(2.0, line); Loco.run(2.0, line);
} }
// the converter and the compressor switched on, the main reservoir left to the compressor from now on
void switch_auxiliaries_on(test::vehicle &Loco) {
Loco->ConverterSwitch(true);
Loco->CompressorSwitch(true);
Loco.hold_main_reservoir(-1.0);
}
// what the main reservoir gains over the given time [bar]; the compressor of the locomotive adds some 0.07 bar a second
double reservoir_gain(test::vehicle &Loco, double const Seconds, test::track const &Track) {
auto const before{Loco->CompressedVolume};
Loco.run(Seconds, Track);
return (Loco->CompressedVolume - before) / Loco->VeselVolume;
}
// the locomotive started up the way the driver does it, the brakes released, then the master controller taken to the
// given position a notch a second, the camshaft following it
void get_under_power(test::vehicle &Loco, test::driven const &Driven, int const Position) {
REQUIRE(test::start_up(Driven, line));
test::release_brakes(Driven.cab);
test::drive(Driven, line, 20.0);
// until the pressure switch lets the line contactors close
for (int i = 0; i < 120 && Loco->ControlPressureSwitch; ++i) {
test::drive(Driven, line, 1.0);
}
for (int i = 0; i < Position; ++i) {
Loco->IncMainCtrl(1);
test::drive(Driven, line, 1.0);
}
test::drive(Driven, line, 2.0);
REQUIRE(Loco->MainCtrlPos == Position);
REQUIRE(Loco->MainCtrlActualPos == Position);
REQUIRE(Loco->RList[Position].R > 0.0); // a resistance position
REQUIRE(Loco->StLinFlag);
REQUIRE(std::abs(Loco->Im) > 10.0);
}
} // namespace } // namespace
TEST_CASE("mains before pantographs: without the flag the line breaker needs the pantographs' voltage, as before") { TEST_CASE("mains before pantographs: without the flag the line breaker needs the pantographs' voltage, as before") {
@@ -115,3 +156,196 @@ TEST_CASE("mains before pantographs: with the flag the driver's start-up gets th
CHECK(loco->PantographVoltage == doctest::Approx(test::catenary_3kv)); CHECK(loco->PantographVoltage == doctest::Approx(test::catenary_3kv));
CHECK(test::is_ready(driven)); CHECK(test::is_ready(driven));
} }
// the closed line breaker used to tell there's traction voltage, the undervoltage trip opening it without one. closed
// ahead of the pantographs it tells nothing of the kind, so what the main circuit feeds checks the voltage itself
TEST_CASE("mains before pantographs: with the flag the converter and the compressor wait for the traction voltage") {
test::vehicle loco{ep05(true), 0.0, "test", 1};
prepare(loco);
close_line_breaker(loco);
REQUIRE(loco->Mains);
REQUIRE(loco->PantographVoltage == 0.0);
switch_auxiliaries_on(loco);
REQUIRE(loco->ConverterAllow);
REQUIRE(loco->CompressorAllow);
// the line breaker closed on the battery, the pantographs down: there's nothing to run them on
CHECK(reservoir_gain(loco, 20.0, line) < 0.01);
CHECK(loco->Mains);
CHECK_FALSE(loco->MainCircuitPowered());
CHECK_FALSE(loco->ConverterFlag);
CHECK_FALSE(loco->Power110vIsAvailable);
CHECK_FALSE(loco->CompressorFlag);
// the pantograph up: the converter starts, and the compressor on its 110 V
raise_pantograph(loco);
REQUIRE(loco->PantographVoltage == doctest::Approx(test::catenary_3kv));
CHECK(reservoir_gain(loco, 10.0, line) > 0.1);
CHECK(loco->MainCircuitPowered());
CHECK(loco->ConverterFlag);
CHECK(loco->Power110vIsAvailable);
CHECK(loco->CompressorFlag);
// the voltage gone they stop, behind the line breaker which stays closed
auto const *track{&line};
SUBCASE("the pantograph lowered again") {
loco->OperatePantographValve(end::rear, operation_t::disable);
loco.run(5.0, line);
REQUIRE_FALSE(loco->Pantographs[end::rear].is_active);
}
SUBCASE("no voltage in the catenary") {
track = &dead;
loco.run(5.0, dead);
REQUIRE(loco->Pantographs[end::rear].is_active);
}
SUBCASE("the voltage in the catenary below the one the locomotive works on") {
track = &weak;
loco.run(5.0, weak);
REQUIRE(loco->PantographVoltage == doctest::Approx(weak.voltage));
}
CHECK(reservoir_gain(loco, 10.0, *track) < 0.01);
CHECK(loco->Mains);
CHECK_FALSE(loco->MainCircuitPowered());
CHECK_FALSE(loco->ConverterFlag);
CHECK_FALSE(loco->Power110vIsAvailable);
CHECK_FALSE(loco->CompressorFlag);
}
TEST_CASE("mains before pantographs: with the flag whatever else the main circuit feeds waits for the traction voltage too") {
// a compressor on the main circuit rather than the converter's 110 V, the motor blowers, the blowers of the starting
// resistors, the heating
test::vehicle loco{ep05(true).set("Brake", "CompressorPower", "Main"), 0.0, "test", 1};
REQUIRE(loco->CompressorPower == 0);
REQUIRE(loco->HeatingPowerSource.SourceType == TPowerSource::Main);
prepare(loco);
close_line_breaker(loco);
REQUIRE(loco->Mains);
loco->CompressorSwitch(true);
loco->MotorBlowersSwitch(true, end::front);
loco->RVentForceOn = true;
loco->HeatingSwitch(true);
loco.hold_main_reservoir(-1.0);
CHECK(reservoir_gain(loco, 10.0, line) < 0.01);
CHECK_FALSE(loco->CompressorFlag);
CHECK_FALSE(loco->MotorBlowers[end::front].is_active);
CHECK(loco->RventRot == 0.0);
CHECK_FALSE(loco->Heating);
SUBCASE("nor do they run on a voltage below the one the locomotive works on") {
raise_pantograph(loco, weak);
REQUIRE(loco->PantographVoltage == doctest::Approx(weak.voltage));
CHECK(reservoir_gain(loco, 10.0, weak) < 0.01);
CHECK(loco->Mains);
CHECK_FALSE(loco->CompressorFlag);
CHECK_FALSE(loco->MotorBlowers[end::front].is_active);
CHECK(loco->RventRot == 0.0);
CHECK_FALSE(loco->Heating);
}
SUBCASE("with the voltage they do") {
raise_pantograph(loco);
REQUIRE(loco->PantographVoltage == doctest::Approx(test::catenary_3kv));
CHECK(reservoir_gain(loco, 10.0, line) > 0.1);
CHECK(loco->CompressorFlag);
CHECK(loco->MotorBlowers[end::front].is_active);
CHECK(loco->RventRot > 0.0);
CHECK(loco->Heating);
}
}
TEST_CASE("mains before pantographs: without the flag the converter and the compressor run behind the closed line breaker, as before") {
test::vehicle loco{ep05(false), 0.0, "test", 1};
prepare(loco);
raise_pantograph(loco);
close_line_breaker(loco);
REQUIRE(loco->Mains);
switch_auxiliaries_on(loco);
CHECK(reservoir_gain(loco, 10.0, line) > 0.1);
CHECK(loco->MainCircuitPowered());
CHECK(loco->ConverterFlag);
CHECK(loco->Power110vIsAvailable);
CHECK(loco->CompressorFlag);
// too low a voltage opens the line breaker, and they stop with it
loco.run(5.0, weak);
CHECK_FALSE(loco->Mains);
CHECK_FALSE(loco->MainCircuitPowered());
CHECK_FALSE(loco->ConverterFlag);
CHECK_FALSE(loco->Power110vIsAvailable);
CHECK_FALSE(loco->CompressorFlag);
}
// the undervoltage trip was also what cut the traction motors off when the voltage went: the line contactors open
// with the line breaker, which then doesn't close on a running position. where the line breaker holds without
// voltage, its undervoltage relay opens the line contactors itself, until the master controller is back where a
// start begins
TEST_CASE("mains before pantographs: with the flag the line contactors open when the traction voltage goes, and the start begins anew") {
test::vehicle loco{ep05(true), 0.0, "test", 1};
auto driven{test::driving(loco)};
get_under_power(loco, driven, 5);
// the voltage goes: the line breaker holds, the pantograph stays up, the motors are cut off
test::drive(driven, dead, 3.0);
CHECK(loco->Mains);
CHECK(loco->Pantographs[end::rear].is_active);
CHECK_FALSE(loco->NoVoltRelay);
CHECK_FALSE(loco->StLinFlag);
CHECK(loco->Im == 0.0);
// the voltage back, with the master controller still where it was: the camshaft went down to zero and stays
// there, the motors still cut off; the converter is back on its own
test::drive(driven, line, 10.0);
REQUIRE(loco->PantographVoltage == doctest::Approx(test::catenary_3kv));
REQUIRE(loco->MainCtrlPos == 5);
CHECK(loco->Mains);
CHECK(loco->ConverterFlag);
CHECK_FALSE(loco->NoVoltRelay);
CHECK_FALSE(loco->StLinFlag);
CHECK(loco->MainCtrlActualPos == 0);
CHECK(loco->Im == 0.0);
SUBCASE("the master controller back at zero: the start goes as usual") {
while (loco->MainCtrlPos > 0 && loco->DecMainCtrl(1)) {
// down to zero
}
REQUIRE(loco->MainCtrlPos == 0);
test::drive(driven, line, 1.0);
CHECK(loco->NoVoltRelay);
CHECK_FALSE(loco->StLinFlag);
for (int i = 0; i < 3; ++i) {
loco->IncMainCtrl(1);
test::drive(driven, line, 2.0);
}
CHECK(loco->StLinFlag);
CHECK(loco->MainCtrlActualPos == 3);
CHECK(std::abs(loco->Im) > 10.0);
}
SUBCASE("the master controller back at the first position, where the line contactors close on a start") {
while (loco->MainCtrlPos > 1 && loco->DecMainCtrl(1)) {
// down to the first position
}
REQUIRE(loco->MainCtrlPos == 1);
test::drive(driven, line, 2.0);
CHECK(loco->NoVoltRelay);
CHECK(loco->StLinFlag);
CHECK(loco->MainCtrlActualPos == 1);
}
}
TEST_CASE("mains before pantographs: without the flag the line breaker opens when the traction voltage goes, as before") {
test::vehicle loco{ep05(false), 0.0, "test", 1};
auto driven{test::driving(loco)};
get_under_power(loco, driven, 5);
test::drive(driven, dead, 3.0);
CHECK_FALSE(loco->Mains);
CHECK_FALSE(loco->StLinFlag);
CHECK(loco->Im == 0.0);
// and stays open with the voltage back
test::drive(driven, line, 10.0);
CHECK_FALSE(loco->Mains);
CHECK_FALSE(loco->StLinFlag);
CHECK(loco->MainCtrlActualPos == 0);
CHECK(loco->Im == 0.0);
}