maj00r
9b596e7ffa
feat(editor): reverse curves laid through points in the mode of a curve: points clicked along an S, with a straight between its curves or none, gave "No curve follows the points clicked along it", and a curve to and fro of three was laid as one curve running metres off the points. A stretch traced is fitted as a chain of two to four curves too: the points split where the curvature they show changes its side, a curve for each part, the lines between them, the common tangents of a reverse curve, fitted with the radii and the transitions from the tangents at the points of inflection. Two curves turning the other way may meet with no straight between them, their transitions meeting at the inflection, or their arcs; the radii which fill the room between their vertices are kept as they were laid, a hair under, so the design gives no warning of radii made smaller. Two turning the same way stay one compound curve unless a straight of shortest_between parts them. A unit test traces eight such lines, clicked exactly and 5 cm off, with other radii and the ends not parallel, and finds the radii within 3 %
2026-10-26 18:23:04 +01:00
550d47e97c
Merge remote-tracking branch 'jano211/siec-radio' into feat/renderers-cleanup
2026-10-26 16:36:36 +01:00
719c729929
Improve rain shader
2026-10-26 15:51:56 +01:00
Claude
619f048f31
Sieć trakcyjna: kotwienia, kotwienie środkowe, parasole i wysięgniki rozstawione, konsole 4890/4690
...
Sam kod exe z gałęzi siec-trakcyjna od poprzedniego commita (bez testów, notatek i danych z tests/catenary).
Dane (data/traction_*.txt) leżą poza repozytorium.
- kotwienia ciężarowe i stałe (0404/0405, przewody zakotwione osobno, sieci bez własnych danych: network <symbol> as <kod>)
- kotwienie środkowe 0406/0408/0418/0416: lina, V i zaciski na linie nośnej liczonej jak przęsło, obejma 4160 na teownikach
- parasole i wysięgniki rozstawione na konsolach 4890, wysięgi pomocnicze 0167 na belkach 4690, trzeci wysięgnik w osi słupa,
lina nośna z innego wysięgnika (messenger_from)
- przęsła w nietypowych sytuacjach nie przechodzą na stary wygląd (bez Y, bez wieszaków, lina nad przewodem)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01GfTogWDsfCE8RGFGvm2eyp
2026-10-26 01:12:06 +01:00
a6bdeeaa2b
Add DLSS Frame Generation (gfx.framegeneration x2/x3/x4) and Reflex (gfx.reflex) to the Vulkan renderer
2026-10-25 20:52:12 +01:00
1841e6d7b0
Add NVIDIA DLSS to the Vulkan renderer (gfx.antialiasing dlss/dlaa) and gfx.buffer.percent
2026-10-25 19:35:33 +01:00
maj00r
a0427bb80b
feat(editor): from the end of the diverging track of a switch the line laid always goes on with the curve of the switch: a straight or a bend the other way after P4 begins with the transition out of the curve of the switch, as after a plain track on a curve, never with a jump of the curvature, whether laid through points, traced, dragged in the straight layout or joined to another free end. The transition is the one for the speed the curve of the switch allows with no cant (about 48 km/h at R 300, so 20 to 30 m), not for the speed of the line. A straight with no bend clicked on from such an end runs on the way the transition leaves, as far as the point clicked, not along the tangent at the end, which left no room for the transition. Where no transition fits, as for a straight shorter than it, nothing is laid and the status says why
2026-10-25 17:26:26 +01:00
maj00r
34bd7c853e
fix(editor): no path of a few millimetres laid by the route design, and no camera at no finite place: an arc of a compound curve squeezed to almost nothing in the plan (a share of 0.00002) made pieces of a few millimetres, which the simulation takes for paths of no length (Bad track: zero length spline, it measures a path in steps of 5 cm), laid as tracks with kinks at their joints. alignment::pieces gives such a stretch to the piece next to it, the one between the same joints if there's one, so no piece is shorter than 10 cm, and a piece of no finite length isn't split for ever. A zoom with the wheel aimed at a point which isn't a number doesn't move the camera, and a camera gone to no finite place goes back to where it last was: right after such tracks were laid the graphics driver hung (TDR) and the whole machine froze. A unit test cuts 4000 compound curves of random arcs, transitions and shares into pieces, as the plan lays them over the paths there and all over again, and finds none under 5 cm
2026-10-25 17:26:16 +01:00
maj00r
aca659754b
fix(editor): Ctrl+Z after a crossover laid along a curve leaves nothing behind, and such a crossover reaches from a transition onto the straight: the pieces the cut of the curve split off and then took out under a switch in the same step went into the history both as made and as taken out, so an undo retired them and brought them back, loose on top of the tracks put back (the curve seen chopped along its old path); now such a piece is neither, and push_track_snapshot drops a path that is both for every tool. The design of the grade line of the outer track, raised with the crossover, goes back with the undo as well (the step keeps the library of the designs), also when a crossover is moved or taken out for the route laid again. The frame a crossover along a curve is planned in goes on 250 m along the straights past the ends of the curve, and the release may fall on the straight of the other track: pressed near the end of the last transition and dragged towards the straight, its first switch ran past the end of the curve and the crossover was refused ("A switch of the connection runs off the end of its straight"); the first switch is drawn along that frame as it's dragged. The insert takes the style and the name of the track pressed on
2026-10-25 17:26:05 +01:00
71a6628a4a
Vulkan ray tracing: shade the heightmap terrain from its layers; longer default SSR range
2026-10-25 17:15:58 +01:00
e201c83825
Vulkan ray tracing: trace only visible reflections, sun shadow from the shadow map, foliage switch and timings
2026-10-25 16:09:19 +01:00
08f4f6ed60
Vulkan ray tracing: include tracks and roads, build triangle strips and fans
2026-10-25 15:35:26 +01:00
cdacb4110b
Vulkan ray tracing: test the gathered scene around the camera, not the world origin
2026-10-25 14:53:06 +01:00
f20b1a3071
Replace cubemap scenery reflections with SSR, add Vulkan ray traced reflections
2026-10-25 13:54:49 +01:00
maj00r
f83a1a0cd2
feat(editor): the tracks onto the terrain from the terrain panel too: the terrain model (F5 Terrain) has a step 3, Tracks and terrain, with Tracks onto the terrain, the one to take first, big, what it does told under it (all the tracks go down or up onto the model, loaded along them by itself), then, after "Or:", Only the ones not fitted and Terrain under the tracks, each with a line of the case it's for; the same block stays in the panel of the tracks, under All the tracks of the scenery, with a line saying where the scenery is put on the map while it isn't. The progress of these is shown at step 3, the loading buttons of step 2 greyed meanwhile. The terrain lesson of the tutorial tells of step 3 so
2026-10-25 13:42:51 +01:00
maj00r
79a8c13586
fix(editor): a track bent by its second control vector is drawn bent: the straightening of a straight with control vectors (world/Track.cpp) checked the first vector twice, so with it left along the straight the second one, dragged with the gizmo, changed the data but not the track drawn; now a straight only where both vectors lie along it or aren't given. A track bent by hand into an S between two points dragged is labelled with its length (L 77 m), not with a radius of many kilometres read off it; the "K: split here" by the cursor isn't shown while a point is dragged; Ctrl+Z takes away the warning by the cursor of what it took back (the paths that left the kept design). The tutorial clips of editing recorded again: selecting and fixing without the gizmo (a joint dragged, the warning read, Ctrl+Z), and the new one of editing with the gizmo (Q, a control vector dragged bending the track, W, E)
2026-10-25 12:57:23 +01:00
maj00r
a312fd9935
feat(editor): with the gizmo hidden a track is changed by its ends only: its control vectors are neither drawn nor caught until Q, W, E or the buttons above the view bring the gizmo out, so a track selected won't bend by chance; the hints say what dragging an end does (a joint: the neighbours follow, a free end: a new track out of it, with Ctrl it moves). The tutorial has a lesson of its own for editing with the gizmo, after the one of selecting and fixing, which no longer speaks of it: the arrows, the rings, the handles, the control vectors, a point clicked, Ctrl and Esc, ticked off when the gizmo is out and a track bent or moved with it; thirteen lessons. Also puts back in place two lines of the band of the curvature which dd64b821 committed out of their place (the arc declared inside the loop, so that commit didn't compile)
2026-10-25 12:33:19 +01:00
maj00r
97b6a84d1b
fix(editor): a curve laid from a free end on a curve, or to one, goes on from its curvature: traced (Tab) from the end of the diverging track of a switch it begins right at P4 at the radius of the switch, not on a straight nor with a transition from a curvature of 0. The design of the line takes the curve of the adjoining track at each end (start_curved/end_curved with the radius, the side and the cant, kept with it in the scenery): the curve of the first vertex turning its way, or of the last one, begins right at the end, its transition going from that curvature and cant to those of its first arc, as between the arcs of a compound curve, none where it goes on at its radius; the radius of its arcs is the one which begins it there, solved for the tangent, the curves next to it making room on the straight. A curve traced next to such an end is fitted by its transitions alone, with none between the curves where the points keep to that as well, or laid from a straight there where it doesn't go on from it or that keeps to the points much closer: eased out of the curve of a plain track by the transition of the norms, the line beginning at its end, or right from P4, as a switch goes on with a straight. A bend of straights turning the way of the curve gets its curve going on from it with the transitions and the cant of the norms; the other way, or a straight, as before: eased out of the curve of a plain track, the jump of the curvature kept at a switch, as at its start, and not warned of. The cant of the adjoining track goes on into the curve with no ramp at that end; the norms ask for the transition between the curves only where the curvature differs by more than 5 % or the cant by 5 mm. The readout by the cursor, the status after laying and the plan tell the curve going on from the track, the plan with a box to go on or not. Dragged back to P4 from a point the curve goes on from its radius too. Selftests laywalk, laybends, curvejoint, endcurves; unit tests of a curve going on from a switch and into a free end, its cant, traced, through a transition into a larger radius, and of a bend of straights after such an end
2026-10-25 12:28:55 +01:00
maj00r
91900a0ead
fix(editor): the band of the curvature edits each arc of a compound curve: its arcs, elements of an even curvature, were taken for nothing to drag, and any change went to the first radius; now the plateau of an arc changes its own radius, a ramp between two arcs the transition between them, the ends of a plateau the transitions either side of it, by a drag or the wheel, the tooltip and the value shown while dragging naming the arc. The tutorial shows the correcting of a compound curve in a clip recorded in the editor in place of the drawing: the plan of the curve opened, the plateau of R2 dragged from 138 to 174 m, the line applied to the scenery
2026-10-25 12:01:12 +01:00
maj00r
cb766dabb4
feat(editor): the top view labels each curve once and each row of straights in line once, not each of their paths: a curve, from its first transition to its last, with the radius of its arc, of each arc of a compound one, its transitions and its cant (each arc's where they differ), as the plan reads it and as the laying shows it, in the middle of it; a straight row with its whole length. A piece of a transition curve no longer shows the radius of the arc as its own. The tutorial clips recorded again with them, in the top view: laying, the curves with a compound one traced (R 300/150) after the bend too sharp for the speed, a track selected with no gizmo, its control vector dragged and taken back, and the switches: one put into a track, a crossover between two tracks and a switch ladder laying its fan; the lessons of the curves and of the switches tell of the compound curve, the crossovers and the ladder
2026-10-25 11:35:25 +01:00
89f11895fc
Keep the walk's model block after the depth and shadow passes of the gpu-culled draws
2026-10-25 11:18:34 +01:00
maj00r
29b9b93353
fix(editor): the plan warns of the curved track adjoining a curve only where the curvature jumps there: a curve going on from the diverging track of a switch at its radius (R 300 after R 301 in wsd) no longer has it. The side the adjoining track turns to is taken with its radius into the chain and the design, and the curvature the design meets it with, signed by its turn, compared with it, within 5%; a design kept without the side is taken for turning its way. Unit test: R 300 from the very start after R 301 turning the same way gives no warning, turning the other way or starting with a straight does
2026-10-25 11:14:49 +01:00
maj00r
bbb3e9e61e
feat(editor): laying and editing the track as a beginner meets them: the points clicked and not laid yet named at the top of the panel with Lay (Enter) and Drop the points, Enter shown by the bar at the bottom while there are some, and a first Esc over them only warning, the second one dropping them; the readout by the cursor kept in the 3d view, on the other side of the cursor where the view ends, with only the first warning of a curve and how many more the panel lists; the grid, the labels and the lines drawn over the view no longer seen through the docks; the gizmo in the tracks hidden until Q, W or E or its buttons above the view bring it out, an arrow there hiding it again, so a selected track isn't moved by chance; the radius of the curves at the bends headed so in the panel, the laid line told in metres and pieces, the hints of the select tool and of a straight shifted around an obstacle translated. An empty scenery opens facing north, the top view with the north up as the compass and the orthophoto have it (on LK2 Warszawa Wschodnia left, Rembertow right). The tutorial tells the laying as it works now: the bends clicked and Enter, the curves made at them and orange where too sharp for the speed, Tab for a curve traced, the radius by Ctrl+wheel when joining, the gizmo by Q W E, the terrain model loaded and fitted from the panel of the tracks, signals by I; its texts wrap to a dock it's put in, new clips of laying and of the curves, recorded with the selftest badge drawing the mouse or the key in use; the empty scenery and the shortcuts say the same
2026-10-25 11:02:45 +01:00
252b9373ea
Add gfx.antialiasing (off, msaax2/x4/x8, taa) with temporal anti-aliasing in the GL 4.6 and Vulkan renderers
2026-10-25 05:17:41 +01:00
c48c58776a
Vulkan: parity with GL (P1–P7), shared GPU culling records (N6c), threaded command recording and render thread (M1, M4)
2026-10-25 03:06:01 +01:00
maj00r
e43863932d
feat(editor,track): a cant ramp of its own, off the transition curve: each end of a curve may have its ramp moved and of a length of its own (ST-T1-A6 9.6 pkt 5 and 11), on the straight before the curve or on the arc, the transition keeping the full cant all along, as a switch laid on it wants it; set in the plan under "Cant ramps", stored with the vertex as "ramps", reversed with the curve, marked across the track in the view. The cant of a line is a profile along it now, the paths cut where a ramp of its own starts and ends, their rolls following it, warnings where a ramp is shorter than its cant asks for or reaches into the curve before, past the line or over the other ramp. A switch on a cant ramp is drawn following it: its rails, blades, frogs and bed made at the mean of its rolls, as before, are turned along each path to the roll of the path there, so it no longer steps at its ends against the tracks either side. The checks of a switch laid into a curve warn of the values of table 11.9 in brackets as of the others, with no word of a consent. Unit test of a ramp moved onto the straight
2026-10-25 00:54:50 +02:00
maj00r
ece61056ff
feat(editor): a switch laid into a curve is checked by ST-T1-A6 as it's placed: the radii of its main and diverging tracks at its start and its end shown at it; warnings where the curvature of a track turns from one side to the other within it (KZW II, 9.7 pkt 12), where the diverging track is sharper or the main track bent more than table 11.9 allows the basic switch (the values allowed by way of exception named), where a switch of 1:9.403 or steeper is bent (11.4 pkt 4), where the cant changes within it (11.4 pkt 7), where a cant ramp starts or ends within it or under 6 m off it (9.6 pkt 16-17) and where the cant is over 100 mm (table 9.6); a note on a transition curve, which only an exception allows. The ends of the cant ramps are marked on the curve, and the start of the switch pressed within 3 m of where it starts or ends at an end of a ramp, or keeps the 6 m off it, is drawn there. The warnings stay in the status once it's laid. The checks stand on their own in editor/editorSwitchCurve, with unit tests
2026-10-25 00:29:05 +02:00
maj00r
aeef2cebb3
feat(editor): the plan shows which curve is edited: each named W1, W2... as its vertex is in the view, with its km and "Show in the view", which flies the camera over it; the part of it whose field the mouse is over or which is being edited (the whole curve, an arc of a compound one, the transition in, out or between two arcs) lit up in the view and named there with its radius, cant or length. The points clicked when a line is laid are kept with its design in the scenery ("click" lines, moved with it): the plan shows them in the colours of their departure and, while "Keep to the points clicked" is on, fits the radii of a curve whose transitions or cants are changed again to them, its transitions and cants as set; "Transitions for these cants" makes the transitions as long as the norms ask for at the radii and the cants set, an arc of a compound curve with no cant lengthening the ones either side of it. Unit test: 50 m between the arcs become 85 m, the curve 4 cm off the points clicked instead of 58
2026-10-25 00:11:58 +02:00
maj00r
2a399a92a5
feat(editor): each arc of a compound curve has a cant of its own, set in the Plan by each radius ("Cant of R1 (mm)"...), ramped along the transition curves between the arcs; until it's set, the cant of the curve in proportion to the curvature of the arc, as before, "auto" taking it back to that and "Apply recommended for V" all of them. The transitions between the arcs of the norms follow the cants set; warnings where the cant of an arc exceeds the norms, where the unbalanced acceleration does on any arc, and where a transition curve, at the ends or between the arcs, is shorter than the change of the curvature and of the cant along it needs. The labels of the curves show the cants of the arcs where they differ. Stored with the vertex as "cants", reversed with the curve; a unit test
2026-10-24 23:41:26 +02:00
maj00r
00f066ac33
fix(editor): a track laid keeps in the scenery the design it was laid by, as it is, not its curves read from the paths again: read again a compound curve with transitions between its arcs came out another one, the plan showing it so. A track dragged from a free end, or laid on from one by the buttons, is no longer read either, nor the run of the tracks it joins with it, which put a design read so in the place of the one laid; the plan reads such curves when it's opened
2026-10-24 23:15:36 +02:00
maj00r
0577073926
fix(editor): a compound curve is fitted with the transition curves of the norms between its arcs from the first step, not found without them and given them after: from several starts, the problem having more than one bottom, each count of arcs from the curve fitted with one less, its longest arc cut in two, and from the curvature the points show, the fewest arcs taken which keep within 0.3 m of the points, or within 0.1 m of the closest; and the transitions fitted no longer than half as long again as the norms ask for, 30 m at least, a fit started below that
2026-10-24 22:59:47 +02:00
maj00r
f94ddb293f
fix(editor): a compound curve of more than three radii, made of bends clicked close along a curve or traced, has the transition curves of the norms between its arcs too: its radii found with the arcs meeting directly, then fitted again with the transitions between them; in abc the curve keeps within 0.12 m of the points clicked with them
2026-10-24 22:40:28 +02:00
maj00r
133ba9cb45
fix(editor): the heights from point to point broke the grade only at the bends of straights which stay bends, a curve traced or bends clicked close along a curve going at one grade from one of its ends to the other, attached there; and two tracks laid no longer meet at two heights where a point was clicked within 5 m of their joint, each end of a piece not cut there taking the height of its own stretch, not of the one the middle of the piece lies on (steps of 0.6 m on a steep grade in abc). Unit tests of the heights from point to point
2026-10-24 22:28:43 +02:00
maj00r
4602f727bb
feat(editor): bends clicked close along a curve make one compound curve, not curves with short straights between them: a row of bends turning the same way, the straights between their curves shorter than as many metres as km/h of the speed (30 m at least), is taken for points of a curve seen on the photo, one curve fitted through them between the straights before and after it, with as many radii meeting with no transitions between them as keep it within 0.3 m of the points, up to eight, and taken where it keeps within 1 m; a row which doesn't is cut in parts, two bends alone joined into one curve along the line their curves laid. A curve traced is two curves turning the same way only with a straight between them as long as that and keeping much closer to the points than one compound curve; a fit running off to the largest radius gives two transition curves meeting. The transitions fitted turn no more than the curve; arcs and spirals are found many times quicker, the curve of a compound fit made straight away, a transition integrated in 64 steps at most. The fits wait on the thread of the laying in a queue of their own, the one asked for last fitted first
2026-10-24 22:09:27 +02:00
maj00r
70554cc40e
fix(editor): a stretch traced is two curves only where both turn and fit between the straights at radii short of the ends of the ones tried, not a long one with a kink; the line of a stretch sampled every 4 m at most while it's fitted, the fit some times quicker
2026-10-24 21:12:40 +02:00
maj00r
b74a200bdf
test(editor): EU07_EDITOR_SELFTEST_HIDDEN runs a selftest in a window never shown nor focused, full screen or not, for the computer in use meanwhile
2026-10-24 21:12:28 +02:00
maj00r
6bd3d4d19f
feat(editor): laying from the photo in two modes, Tab switching them in one row of points: the points clicked as bends of straights, eased with two transition curves meeting with no cant, of 3000 to 6000 m set in the panel, or with an arc of the norms where they don't fit; or the points along the middle of a curve seen on the photo, the last two on the straight after it, a curve, compound or two with a straight between them, fitted to them with its radii and its transitions. The points clicked are kept where they are, a curve below the norms laid with its warnings in the colour of one; the line shown as the points are clicked, laid by Enter in one step of the undo and going on from its end, Backspace taking the last point back, Esc dropping the points not laid. A bend after a free end or a curve traced goes along its straight, dashed; the curves labelled with their radii, transitions, cant and speed, the straights with their lengths, the points traced in the colour of how far the line is from them, the curves of the line listed in the panel. The Plan sets two transition curves with no arc for a vertex. Selftests laymode, layradius, laytrace, layp, layreport, layenter, layback, laycancel, laysample
2026-10-24 21:12:27 +02:00
maj00r
500f068297
feat(editor): the curves of the laying from the photo in the design of the lines: a vertex of two transition curves meeting at its radius, with no arc and no cant, kept in the scenery files; the bends of straights eased with them at a radius from 6000 down to 3000 m, or larger where they'd be too short for the speed, else with an arc of the norms as large as fits, the straights between two bends shared, the bends staying where they were clicked and a curve below the norms kept with its warnings; a stretch traced on the photo fitted with a straight, a curve with its radius and the length of its transitions, a compound one, or two curves with a straight between them, on a thread of its own while the cursor moves; the heights from point to point through all the points clicked. Unit tests of the design of the lines
2026-10-24 20:57:59 +02:00
49f9df7d98
Enable vulkan compilation by default
2026-10-24 20:26:28 +02:00
9b7d02e5fb
Vulkan: scene rendering (D1–D7) on a scene walk shared with GL (N6a, N6b)
2026-10-24 20:10:24 +02:00
maj00r
9855de74b4
feat(editor): the tracks are laid to the PKP PLK norms only: the choice of the free laying is gone, its cards in the panels of the laying and of the plan, the question as the laying starts and the setting; the transition curves and the cant of the norms always, the speed of the laying with its chips, the radius below the minimum for the speed a warning. The settings keep the radii the bends of the straights will be eased with instead
2026-10-24 20:05:04 +02:00
maj00r
5ae9932ce7
fix(editor): the tracks being built drawn over a dark edge, the points clicked while laying and the line between them too: the white straights of the track laid no longer melt into the light base map of the top view zoomed out
2026-10-24 19:25:30 +02:00
maj00r
69980b5540
perf(editor): the top view draws the terrain lighter: the cells of its grid some 16 pixels across, not 10, the chunks streamed only as far as the screen reaches, not the range of the 3D view, and the cube map of the reflections not made anew while it's shown, nothing in it reflecting
...
On test2 at an extent of 300 m: 55 chunks in place of 106, 204 thousand triangles of the terrain in place of 895 thousand (all drawn 0.82 million in place of 2.34), the GPU 1.46 ms a frame in place of 2.33, and 3.6 ms of the CPU less a frame for the reflections. The 3D view stays as it was; the range of 50 km of the tracks work area in 3D cost nothing measurable on l053. Selftest perf logs the chunks of the terrain, their triangles and the steps of their grids.
2026-10-24 19:23:01 +02:00
maj00r
dcaf48d7b6
feat(editor): the editor knows which tracks have their grade line fitted: a grade line applied, fitted to the terrain model or with the profile, marks its tracks with the shape they have, kept in the scenery files as //$f lines; a track changed since, by hand, by K or taken back, isn't fitted any more. The terrain of the tracks in the panel of the tracks tells how many of the selected ones are fitted, and puts onto the terrain all the tracks or only the ones not fitted, these meeting the fitted ones as they are, the scenery not moved
...
Selftests: nmtauto [unfitted], fittedstate [reload].
2026-10-24 19:14:08 +02:00
maj00r
59c3458173
feat(editor): the terrain model in the field of work of the terrain only loads and keeps the model: its place, Load along the tracks or around the camera, the band, the offset of the heights, the progress and the faults, with no choice of what gives way; the tracks and the terrain are fitted to each other in the panel of the tracks. In a scenery with its terrain made from the model the terrain grows around the camera too, not only ahead of the laying; the chunks the growing gave up are not asked for again
...
The terrain follows the edits of the tracks with a formation only: a track with none is not shaped on its own any more, nor after the chunks made around it, and the formations are laid after a load only when the tracks are put onto the terrain or the terrain under them.
2026-10-24 19:02:29 +02:00
maj00r
7d0caee541
feat(editor): the terrain of the tracks in the panel of the tracks: Draw the terrain to the track, of the selected tracks or of their whole run, Restore the terrain, each one step of the history, the terrain following the tracks edited or not, and Tracks onto the terrain and Terrain under the tracks for all the tracks of the scenery
...
The formation of a track as it is already was taken out of the terrain when the track was shaped again, as after a change of its properties alone: the formations the tracks still have are no longer counted as gone. Selftest trackterrain pull|restore <tracks>.
2026-10-24 18:53:32 +02:00
maj00r
11d1342181
feat(editor): an end of a track dragged, and an end of a straight dragged by its handle, goes onto the ground at the height of the ballast, as a point laid; with Shift held it keeps its height
...
Selftest trackends: the ends of a track against the ground under them.
2026-10-24 18:45:47 +02:00
maj00r
9625b4b3d9
feat(editor): K on a track is a break of the grade, as a point of a road: the track split at the cursor, the point between the two at the height of the ground and the ballast there, each of them an even grade from its other end up to it
...
Selftest kbreak: K on the track nearest a point, logs the joint against the ground.
2026-10-24 18:41:25 +02:00
maj00r
641619e13f
feat(editor): the point of a track laid where there's no terrain yet, as over the base map of the top view, takes the height of the terrain model with the offset of the scenery and the ballast, the model under the cursor asked for while laying; the fitted heights of the laying called a smoothed grade line in Polish
2026-10-24 18:37:44 +02:00
maj00r
2ae10f5901
feat(editor): the chunks waiting for the terrain model and the tiles of the orthophoto asked for and not shown yet outlined on the ground where they will be, pulsing, blue and orange, named where the name fits: at the heights of the terrain beside them or of the model, else level with the nearest chunk or track
2026-10-24 18:31:24 +02:00
