18
0
mirror of https://github.com/MaSzyna-EU07/maszyna.git synced 2026-11-19 16:55:10 +01:00
Commit Graph

6 Commits

Author SHA1 Message Date
jerrrrycho
62526e9d6a test(scenarios): the timetable cases check where the train stops, not how long
Przystanek on td.scn is a technical stop of the td/rozklad timetable (pt): the AI
doesn't wait there for the departure time but sets off as soon as it counts the
train as standing at the W4, below 1 km/h. How long the speed then stays under
0.5 km/h is only how fast the brake releases. With the AI braking of #264 the
trains creep up to the W4 at about 10 km/h on a light application and stood there
for 1-5 s; the SN61 turns back at 0.36 km/h without stopping. The hold of 5 s
(2 s for the SN61) failed for EP09, SN61 and Vectron and had well under a second
to spare for others.

The cases now check that the train comes down to 1 km/h, the AI's own standstill
at a W4, 1380-1420 m from the start; every vehicle stops at 1397-1401 m, before
and after #264. `stops` takes min_distance and max_distance for that.
2026-11-08 11:16:40 +01:00
jerrrrycho
6ccf4b14bf feat(simulation): test.no_movement_before_pass, a pass that doesn't wait for a stop
The config key from eu07/maszyna#541. By default (yes) a pass reported to
__test.result waits until every vehicle has stood still for 1 s; with no it
ends the test at once. The key is listed with the other test.* settings in the
log and in the test start line.

Scenario tests: new case test_mode_pass_while_moving reports the pass from
event2 of tor1k as the train runs onto it and checks the run ended with the
train still moving (new check ends_moving). The README lists the test.* keys
with their defaults and the input the test mode ignores.
2026-11-07 17:38:38 +01:00
jerrrrycho
6a538d202b test: scenario tests run in the simulator's test mode and check its exit code
run.py starts eu07 with --test (and --test-timeout <duration> for cases that
record a fixed time) and compares the result from the exit code with the
case's expect key, before the physicslog checks. The 14 cases take about 30 s
with -j 4 instead of minutes. --watch keeps the old windowed run.

New case keys: expect, test_config (lines of a config block), track_events
(lines added to a track of the base scenery, e.g. event0 test_pass). New cases
show each end of the test mode: test_mode_pass, _signal_passed_at_danger,
_timeout and _standstill. The slippery rail cases slide past the red signal,
which now ends a test, so they set test.fail_if_stop_overran no.

README documents the test mode for scenery authors.
2026-11-07 16:20:42 +01:00
jerrrrycho
6209e16558 test: slippery rail skid cases, wheelslip and vehicle speed checks
- physicslog rows keep all columns (text ones as None), checks can read
  the wheelslip flag and the new vehicle speed column
- slips: the lead vehicle's wheels slip at some point (makes sure a
  slippery rail case does what it's meant to)
- slip_clears: once stopped, the wheels stop slipping within N seconds
- holds_still: once stopped, the vehicle doesn't creep, by vehicle speed
- td_red_signal_moving.scn: the red signal case starting already moving
- eu07_slippery_red_signal / eu07_slippery_push_red_signal: skid on
  braking for the red signal with track friction 0.03; the pushing one
  fails without the fix for eu07/maszyna#479 (stays skidding, creeps)
- sn61_td_timetable: stop hold 5 -> 2 s, the railcar arrives 5-7 s
  before its departure time, so 5 s made the case flaky
2026-11-07 16:20:42 +01:00
jerrrrycho
cb0a122383 test: red signal case, seven vehicles on the td.scn timetable, parallel runs
- eu07_td_red_signal: no route set, the train has to stop before the exit
  signal and stay there (new checks stays_stopped and distance; distance
  is integrated from the speed, the physicslog has no position)
- en57/ep09/et22/sm42/sn61/vectron/eu07_td_timetable share one fragment
  template, td_timetable.scn; a case sets vars.consist and the lead vehicle
  is named {{vehicle}} = autotest_<case>
- -j N runs cases in parallel: each case has its own physicslog and, with
  multiplelogs, its own log files, which are moved to out/<case>/
- a run stops at once on Bad vehicle / Bad trainset instead of waiting for
  the timeout, and fails after 120 s without physicslog rows
- the .sbt geometry cache of a test scenery is dropped when the base
  scenery is newer

All 8 cases pass in about a minute with -j 4.
2026-11-07 16:20:41 +01:00
jerrrrycho
798fd89dd0 test: scenario tests that run the simulator and check a vehicle's physicslog
tests/scenarios/run.py builds a test scenery from a game install's scenery
(own trainsets removed, case fragment added), runs eu07 in ghostview with
physicslog on, and checks what the vehicle did: starts, max speed, brakes,
stops. First case: EU07 on td.scn driven by AI on the td/rozklad timetable,
with the Stacja1 exit route set by an event launcher instead of shift+4.

eu07 gets a -ini <file> option: an extra settings file read after eu07.ini,
so a test run can switch to a window and turn on physicslog without touching
the user's config.

Local only: scenery and vehicle data are not in the repo.
2026-11-07 16:20:41 +01:00