8 Commits

Author	SHA1	Message	Date
maj00r	80379b991c	feat(editor): the work of the editor sessions not committed yet, as it stands: a curve traced on from the end of the diverging track of a switch goes on at its radius with no transition in, or from a straight right at the switch (alignment start_held, fit_going_on), the plan taking an end adjoining R 10 km or more for a straight; the switches and slips laid into curves, slid along them and laid alone on one straight (frame_path, switch slide); the route plan reading curves going on from the tracks adjoining, the kept designs taken or forgotten; the orthophoto and terrain model settings, downloads and layers, the tracks onto the terrain; the curvature of a path in the plan (bezier::plan_curvature); the Polish texts of all of it. Not built as committed	2026-10-29 22:19:06 +01:00
maj00r	7b11db566e	feat(editor): a slip Rkp or Rkpd bent into a curve of a side track: dragged on a curve with a slip armed it's laid out on the tangent to the curve where it was pressed and bent onto the curve as a switch laid into one is, editor_mode::frame_path laying a path of a template into the curve for both, its crossing track coming along with its ends free, ahead to the side of the drag, the slip curve of a single slip on that side, the straights of both tracks out to the joints of its template. A crossing goes only where two straights cross, a curve as sharp as the slip curves is refused. As it's dragged the view tells the radii of its tracks and slip curves, its cant and what switch_curve::check_slip says, the 11.4 pkt 4b of ST-T1-A6 among it; laid, the status the same. A slip bent into a curve isn't replaced by one laid out of straights. Selftests switchcurve, bladetips: a Rkpd 49E1-190-1:9 in R 800 m with its slip curves of R 154 and 249 m and the warnings of 11.4 pkt 4b and table 9.2, one of R 300 m in R 800 m with no warning of table 9.2, a Rkp in R 4000 m, the blades from 1.248 m on all of them; refused in R 150 m, a Skrz refused	2026-10-27 19:39:38 +01:00
maj00r	7f6a8736ca	feat(editor): a slip goes only where the straights cross at the skos of its template: a Rkpd 1:9 was laid at a crossing of 1:7 or 1:14 as well, shaped for the angle of the tracks there into no slip of the catalogue. The straights crossing at a skos more than 0.14 deg off it, half of what keeps 1:9.51 and 1:10 apart, are refused with the skos they cross at and the slip of the same kind made for it, of the same rail and radius first, or none; a double slip replaced by one of another skos likewise. The panel and the hints say the slip goes at its skos. Selftest: a Rkpd 49E1-190-1:9 laid at 1:9 and 1:9.08, refused at 1:7 with no template for it and at 1:9.51 with Rkpd S42-230-1:9,51 fitting	2026-10-27 19:35:01 +01:00
maj00r	f8a12107a0	feat(editor): a switch laid with no track there, and no switch laid by a click: a press on the ground with a switch armed lays the switch there, its start where it was pressed, the direction of its main track taken from the drag once it's 4 m long and held, the drag sideways then giving the side of the diverging track, back by the start the direction free again; pressed by a free end within 5 m it goes on from that end in its direction and grade, joined to it. Its ends are left free to lay on from, styled after the track it goes on from or as the lay tool lays its tracks (editor_track::create_switch with a path_style). A press let go within 10 pixels places no switch, a slip at a crossing included, which was laid at once on the press: it's laid once dragged, its straights shown meanwhile. The hints and the panel tell of both. Selftest switchfree: Rz 60E1-300-1:9 on the ground with its four ends free, from the free end of a straight joined and walked through; a click on a straight laid none, a drag laid z1	2026-10-27 19:33:23 +01:00
maj00r	36904c2815	feat(editor): buttons in the switch tool setting a model of timbers on all the switches and crossings of the scenery at once, one for each model of timbers of the scenery data and one for the model of eu07.ini, in one step of the undo; the selftest switchtimbers does the same ... (cherry picked from commit 81a6b855d0)	2026-10-24 16:33:41 +02:00
maj00r	ff1710d9ea	feat(editor): labels for a layman, light at the start; whole sceneries fitted to the terrain model ... Labels: - every button, field, tooltip and message of the editor reread for a beginner: short nouns for the fields with the sentence in the tooltip, the less used options under More settings, one glossary (field of work, template, track, grade), sides told from directions, degrees and per mille as signs, messages built from one format string - plural forms through STR_P; the last entry of a po file is read too, and the Polish plural rule is in the header - lang/editor_pl.po: the code pass entries merged, 391 entries no code uses and 3 duplicates dropped - roads: the notes and errors naming a road translated; the build options and the layout fold the texture length, kerb sizes, traffic share, roundabout part, height over the ground and junction speed limit under More settings, the lanes start folded Grade lines fitted to the terrain model (NMT), a line or the whole scenery at once: - fit_ground: a robust fit on nodes 5 m apart; the ground parting from the line (a bridge, a viaduct, a wall) is gone past rather than followed, the bends keep off the switches as far as their curves reach, a run of bends the same way is one point of intersection, a curve with no room is as sharp as the room lets it be - the ends of the line and the other paths of its switches leading into lines fitted already bound the line by what the tracks between can climb; ends meeting in the plan, laid apart in height by hand, are joined before the run - apply_profile: the paths are split where split_path takes the parameter (a straight was cut in the wrong place, into pieces of a few centimetres the game takes for zero length), no piece shorter than the margin; the paths off the ends of the route are brought to its height - Bytom: 1600 lines, grade breaks at the joints 89 -> 20; Tarnowskie Gory: 848 lines, 223 -> 3; no step over 2 cm	2026-10-19 15:27:50 +02:00
maj00r	979a3d1ce4	feat(editor): switch templates for the rail of the selected track, their names translated, shorter hints ... - the template list shows the templates of the rail the selected track is laid with (railprofile s60/uic60: 60E1, s49: 49E1, s42: S42), a box shows them all - the words of the catalogue names are translated (movable nose, long, gauge, blades outside), the kind of a slip or a crossing its type says already is left out - shorter hints of the switch tool, of More and of the missing drives	2026-10-18 01:50:56 +02:00
maj00r	3ba22aae10	feat(editor): a less crowded track editor and one choice of what the switch tool places ... - the switch tool asks what to place: a switch, a slip switch, a crossing or a connection of tracks (crossover, double, scissors, ladder), with the templates and the options of that kind only and one line of how to place it with the mouse; the bar of hints says the same, the wheel keys of a connection included; panel in its own editormodeswitchtool.cpp - templates are listed by their names, the lengths a and b and the rest of the label in the tooltip - the panel of a selected switch shows its length, its type and its drive; the name, number, rail, kilometre and angle are under Details - one toolbar: the tools are no longer drawn a second time down the edge of the view; the track tools show select, lay, plan, switch and parallel, the others behind More, which starts closed again (setting track_tools_all) - the infrastructure tool has no button nor key - the gizmo options start closed, the node bank isn't drawn in the track mode - no drive models: said in plain words - self-test switchkind	2026-10-18 01:47:06 +02:00