25 Commits

Author	SHA1	Message	Date
maj00r	0138635358	refactor(track): the rail layout value types (crossings, sizes, check and guard rails, cuts, bands, fills, treads, layout) and the wheel and rail constants live in world/RailLayout.h in track_rails instead of inside TTrack	2026-10-14 09:21:19 +02:00
maj00r	23975654a4	feat(track): at a crossing at a wide angle the rails and guard rails ending against the side of another rail or guard rail are glued to it, their ends fitted to its profile height by height instead of square ends with caps and a gap of 5 mm, so the corners of the crossing are closed; the ends at the flangeways stay open for the flanges; a loft span can shift its first and last cross-section along the track by a fit given per height of the profile, and the rail profile gives the outlines of its field and gauge sides	2026-10-14 03:09:08 +02:00
maj00r	a0958cd44e	feat(track): at a crossing at a wide angle each guard rail is glued to its running rail by a filler block between their webs along its whole length, so the flangeways and the gaps cut for the wheels of the other track have a floor instead of showing the ballast; the filler of the track not going through lies a millimetre lower where both overlap	2026-10-14 02:16:52 +02:00
maj00r	3a43871f42	feat(track): at an obtuse crossing the flangeway between the point rail and the knuckle rail is closed below by a filler block at the height of the webs, from the meeting point to where the point reaches its full profile, so the ballast no longer shows through the gap; the rail profile gives the middle of its web and the height where its head starts above it	2026-10-14 02:05:17 +02:00
maj00r	a87148a96c	fix(track): at an obtuse crossing the rail ending at the meeting point and the rail going on from it are joined by a mitre on the bisector of the bend, like one bent knuckle rail, instead of two square ends overlapping in a wedge, and the check rails of the two tracks meet there the same way instead of overlapping each other by 3 cm; a loft span can turn its first and last cross-section about the gauge line for such joints	2026-10-14 01:49:24 +02:00
maj00r	1219dde073	fix(track): obtuse crossings share the running surface too: the top of a rail crossed by the treads of the wheels of the other track takes the brighter texture between the gauge line of the other rail and the edge of its treads, so the boundary runs aslant on both sides	2026-10-13 23:22:31 +02:00
maj00r	90e80aa161	fix(track): the shared running surface ends along the edge of the treads of the wheels of the other track, not across the rail: on a nose leg the edge runs aslant over the head, on a stock rail it follows the curve of the other path; only the top of the head takes the other texture, the rest of the rail keeps its own	2026-10-13 23:13:01 +02:00
maj00r	989a6cd47e	fix(track): flat rail frogs have no plates in the V; the shared running surface of a nose leg goes from its tip to where the wheels of the other track stop reaching its head, on the leg only and not on the wing beside it; the stock rail of a switch is shared up to a quarter of the blade length, where the blade head is half its width and takes the wheel	2026-10-13 22:54:43 +02:00
maj00r	7e20023d07	feat(track): where two rails share a running surface it takes the texture whose running surface is brighter; the brightness is read from the texture file over the u range of the rail head top, the shared parts are the block of crossing grooved rails, the nose of an acute frog from its tip to the end of the V, the through rail across a wide or grooved crossing, the frog of a switch, and the stock rails of a switch with frogs up to half the blade length where the blade grows to a full head	2026-10-13 22:36:09 +02:00
maj00r	2ece18cc4a	fix(track): a crossing of grooved rails is one flat block where their lofts overlap; the rail cut by the other covers the roundings of the rail going through, the tops in the block are flat in one texture, the plates of the V reach up to the rail top, the walls of the cuts are lit and textured as walls, and the nose between two flangeways starts blunt at the width of a nose tip instead of a thin sliver standing in the groove	2026-10-13 22:03:36 +02:00
maj00r	18c01ceb72	feat(track): frogs and crossings for every rail profile; grooved rails share the floor of their grooves where they cross and need no check rails, the V beside the rail going through is one block where the lofts of the rails overlap; the nose of an acute frog of flat rails is filled between its legs as far as their lofts overlap, like a cast insert	2026-10-13 21:03:17 +02:00
maj00r	9016d72d74	refactor(track): the rails of the two paths of a switch are laid by one loop for left and right switches alike, the side of the blade of a path and the blade itself come from one place, used when a switch is made, thrown and its frog found	2026-10-13 19:03:20 +02:00
maj00r	16672e81cc	feat(track): rails are cut where they cross other rails: a switch with the key frogs draws its frog, wing rails and check rails from its rails, tracks crossing other tracks get acute frogs with wing rails and check rails, obtuse points, guard rails along the quadrilateral of a crossing between 20 and 45 degrees and broken rails with guard rails at wider angles, the track going through chosen by name; sizes come from the rail profile, only for the profiles default, s60, uic60 and s39, others are laid whole; rail ends left open are closed with their cross-section; switches of older sceneries, with check rails in their includes and no key, are drawn as before	2026-10-13 18:30:16 +02:00
Hirek193	27a94509c4	feat(roads): right of way and lane turns at junctions, road weights, kerbs, medians and forking roads, banks to the ground, roundabouts, pedestrian crossings, spawn sets by count; fix(editor): model skin export, placement on the ground under the orthophoto	2026-10-04 01:55:35 +02:00
Hirek193	daeed40f15	feat(roads): junctions, height above the ground and rounded profile following the terrain	2026-10-03 20:28:37 +02:00
Hirek193	2f417fddcc	feat(roads): road node with generated lanes, surface and markings	2026-10-03 17:35:08 +02:00
maj00r	7ede96df5f	chore(editor): cleanup comments	2026-10-03 02:41:34 +02:00
maj00r	8f2a34b3cf	feat(editor): route design with curves and transitions	2026-10-03 02:41:34 +02:00
maj00r	e46fe6d06c	refactor(track): reusable segment init, geometry rebuild, cell removal	2026-10-03 02:41:30 +02:00
jerrrrycho	d85096f64d	reformat: remove redundant parentheses	2026-06-30 21:19:46 +02:00
Hirek193	1be56de0fa	Add sleepermodel optional parameter for tracks	2026-05-19 22:10:47 +02:00
docentYT	6be1b0886d	Remove sad workaround	2026-04-28 01:23:53 +02:00
docentYT	ed28eff066	use glm instead of Math3D in world	2026-04-27 00:36:03 +02:00
copilot-swe-agent[bot]	7e49aa8740	Rewrite #includes to use explicit subdirectory paths ... Co-authored-by: Hirek193 <23196899+Hirek193@users.noreply.github.com>	2026-03-14 19:16:48 +00:00
copilot-swe-agent[bot]	0531086bb9	Reorganize source files into logical subdirectories ... Co-authored-by: Hirek193 <23196899+Hirek193@users.noreply.github.com>	2026-03-14 19:01:57 +00:00