maj00r
|
2c3ab90db5
|
fix(track): the tip of a blade lying tangent to its stock rail, as in 60E1 and 49E1 switches with cut tips, is where its theoretical arc gets 5 mm off the gauge face of the stock rail less the 125 mm the nose is planed over, instead of where it gets 3 mm off, so the tips lie 1.25, 1.60, 2.11, 2.63 and 3.34 m from the start of the switch at R190, 300, 500, 760 and 1200 as in the tables of these switches instead of 0.2 to 0.65 m nearer it; blades cutting into the stock rail at an angle, as in S42 switches, keep their tips
|
2026-10-17 23:32:43 +02:00 |
|
maj00r
|
513daa52cc
|
merge feat/rail-crossings: the split rail code, mitred wide crossings, guard rail treads, check rail spacers and frogs for every rail profile, with the geometric switch blades moved into RailCrossings, their shape in track_rails::switch_blade and the lowering of the head in loft_span
|
2026-10-17 23:32:43 +02:00 |
|
maj00r
|
3307cb94e8
|
feat(track): frogs, crossings, guard rails with their castings and spacers, check rails and shared running surfaces for every rail profile again, not only for tracks without a profile, default, s60, uic60 and s39; grooved profiles keep their shared grooves without check rails
|
2026-10-17 23:29:08 +02:00 |
|
maj00r
|
306555a654
|
feat(track): a check rail is held to its running rail by spacer blocks every 0.5 m along its straight part, laid in the same way as the spacers of a guard rail at a wide crossing, below the head from the web of the running rail to the face of the check rail, so the flangeway stays open above them; a check rail replaced by a wing rail gets none; the spacing of spacers and castings is shared by guard rails and check rails
|
2026-10-17 23:29:08 +02:00 |
|
maj00r
|
697592c4aa
|
refactor(track): the crossings of the rails are found in steps, the tracks nearby, the meeting of two rails with its refined place and the crossing made of it, and the crossings of the neighbours mapped on this track, and the check rails are planned, merged, kept clear of blocks and cut in separate functions instead of two long functions; path_count and path_neighbour replace the repeated choice of the paths and the ends of a switch or a plain track
|
2026-10-17 23:29:08 +02:00 |
|
maj00r
|
f67380f843
|
refactor(track): the rail code is split by concern into gauge lines, crossings and check rails, rail materials, rail profile measuring, planning the cuts and laying the geometry, instead of one TrackRails.cpp; rail_offset reuses nearest_distance and lateral; TTrack::rail_dimensions measures the profile through track_rails::measure_rail
|
2026-10-17 23:29:08 +02:00 |
|