mirror of
https://github.com/MaSzyna-EU07/maszyna.git
synced 2026-11-19 23:55:00 +01:00
4ef4a30ef941485e589b33aec8f3fe702fbf7732
87 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
4ef4a30ef9 |
fix(editor): the cursor off the terrain on the ground only where the depth read hit something (Mouse_Hit), not where its offset isn't zero
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DDcMn1Q7wdYkbxDUWscNHZ |
||
|
|
9a4d5a4688 |
fix(editor): the ray to the terrain doesn't come up under a chunk through a gap, and starts behind the camera in the top view
Coming down where there's no terrain and finding itself under the ground of the next chunk, the ray gives up and the depth read back says where the ground is. In the top view it starts 10 km behind the plane of the camera, as far as the view sees, so the ground higher than the camera is met too. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DDcMn1Q7wdYkbxDUWscNHZ |
||
|
|
f1f315d629 |
fix(editor): the points of the terrain tools put on the ground along the ray through the cursor in this frame
The terrain tools (the outlines of Fill, water and chunks, the target height, the brushes) and the area fill took their point from the depth read back under the cursor. That depth is a frame late, so the point was off while the camera or the cursor moved, and it stops at whatever is drawn over the ground (models, the 3D grass), at a grazing angle metres away from where the ground is. Now the ray through the cursor as it is in this frame is followed to the terrain (terrain_streamer::raycast); the depth read back is used only where the ray meets no terrain. The brush circle is drawn where the stroke will land. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DDcMn1Q7wdYkbxDUWscNHZ |
||
|
|
e6fa206e47 |
Split stack 3-5c into master (switch blades, 3D sleepers, editor core, SRK stations, tutorial) (#289)
* feat(track): the rail code split by concern, the blades of the switches with the key frogs shaped from their templates The rails are laid by code of their own instead of inside Track.cpp: gauge lines (GaugeLine), knot lines (Knots.h), crossings and check rails (RailCrossings), rail materials (RailMaterials), measuring the rail profile (RailProfile), planning the cuts (RailPlan), the carving scan (RailCarve) and laying the geometry (RailLayer). A switch with the key frogs draws its blades from the tip where their planed nose ends to the heel, bent as they're thrown, and the rail behind them from the heel on, where they were laid from the start of the switch before; on a switch of the catalogue they start at the cut tip of the tables, 1.248 m from the joint at R 190, 1.5 m at R 300 (track_features::blades). The frogs cut from the rails, the wing and the check rails are built but switched off (track_features::crossings), the rails laid whole as before. The switches without the key keep the blades they had. A switch path can be a chain of pieces: pieces1 and pieces2 keep the parts of each path after the classic bezier, which stays as the approximation older versions read. A path with its radius given is a curve however gently it bends, a plain track a straight only where both of its control vectors lie along it. A vehicle trailing through a switch with a movable nose set the other way runs off the rails at it (TRAILED_SWITCH). * feat(render): the shared treads of the rails and their cut faces drawn, the cut faces in the matte variants of the rail materials Both renderers draw the treads a track shares with the rails it crosses, in the pick pass too, and a pass of their own for the faces where the rails are cut, the ends of the blades among them, in the matte variants of the rail materials, so the cut faces don't shine like the head the wheels polish. * feat(vehicle): an axle on a switch keeps to the path it came on, and coming from the frog end trails the switch through where the wheels reach the blades The switch thrown under an axle no longer moves it over onto the other path; it runs on along the one it entered. Coming from the frog end, where the blades are shaped or the frog has a movable nose, the switch set the other way is trailed through (rozprucie) only where the wheels get to the blades or to the nose, not as the axle enters the track; the other switches are trailed through as it enters, as before. * fix(track): the tracks drawn straight before, which their second control vector bends now, written to the log The simulator told a straight by the first control vector of a path alone, so a track whose second control vector bent it was drawn straight; now it's a curve. Such a track is named in the log as it loads, so a scenery made counting on the straight can be found: 25 tracks of lk357. Paths with both control vectors along them bend a centimetre or so at most and aren't named. * feat(track): 3D sleepers and switch timbers laid where the simulator makes the ballast, switched off in the build The sleepers of a track running alone are laid square to it, the timbers of the switches and crossings across the tracks running over them, shared by them, of the models set with sleepers3d and sleepers3dplain in eu07.ini; sleepers3dbed tells whether the ballast is laid under them too, lowered so they stick out of it. The layout of a cluster of tracks is worked out once and kept till a track of it changes, in a thread of its own while the simulation runs. timbermodel of a track, read and written back before, takes the place of the model of sleepers3d there. All of it is off whatever eu07.ini sets (track_features::sleepers), the tracks keeping their ballast and their sleeper models. * feat(render): the 3D sleepers and switch timbers drawn in instanced batches Render_Timbers lays the beams of the tracks in range where they're out of date and draws those of a run of tracks of a cell gathered by the model and its part or its level of detail, in as few instanced batches as they fit in; in the shadow pass only those near the camera. A track with them leaves its old sleeper model out. OpenGL 3.3 renderer only. * fix(track): the counts of what's wrong with the sleepers kept safe from the thread laying them, and that thread stopped before what it works with goes The counts of the beams clipped, dropped and off the plane, of the slowest and the biggest cluster, are counted by the thread working out the layouts in the background as well as by the simulation laying a cluster itself, and were plain values written by both; they're atomic now. What the thread keeps the clusters in, their version and the counts were made after the worker, as it first asked for them, and so destroyed before it at the exit while its thread could still be laying a cluster; they're made first now, the worker stopping and joining its thread before they go. The tracks go with the paths of the simulation, made before the worker. * revert(track): a tributary and a track of an unknown type load as before They came in with the rail code from the guards of the editor against crashing, and don't belong with the blades: a track of an unknown type loaded as a normal track of the railway could be joined to it and run on, and a tributary loaded as a river with its first path lost the second one when the editor saved the scenery. Both load as on master again; the place where the editor crashed on them is to be guarded where it is. * fix(track): the tracks drawn straight before named in the log once, as they load, and the paths of the switches with no radius told a straight as before in one term The log of the tracks the second control vector bends now was written each time the segments of a track were made again, as a track with its unevenness loads and as the editor changes or drags a track; it's written only the first time, as the track loads. The paths of a switch or a crossing with no radius keep the rule of master, a straight told by the first control vector alone, its two terms being the same length; they're one term now, with the comment saying so. * fix(track): the thread laying the sleepers stopped as the application exits, and loading no models itself The thread reads the scenery, which the application deletes as it exits well before the statics go: it's stopped and joined first thing in exit() now, the worker destroyed with the statics only where the application exits some other way, and not started again after. The models the beams are made of were loaded by the thread where it didn't find them, through the renderer, out of the thread of the renderer, into a map read by the simulation meanwhile: they're found under a lock now and loaded only by the threads other than it, again for all the tracks whenever a track changed since, before a layout is asked of it. With the 3D sleepers off in the build their settings aren't exported, and a track changed doesn't look for the tracks around to lay their beams again. * feat(track): the 3D sleepers turned on with sleepers3d in eu07.ini, no longer switched off in the build track_features::sleepers is gone: sleepers3d <model> in eu07.ini lays them, none (the default) lays nothing and the tracks keep their ballast, as before. The sleepers3d settings are written back with the others. The editor changes the tracks, so while it's open their sleepers are worked out on the main thread as they're needed, not in the background. * fix(render): only the part of a timber model drawn, not what else the model holds A timber model of parts may hold more than its begin, main and end, as the kits with the fastenings of the rails do. Those were drawn with each part of each timber, in the middle of the track; they aren't laid, so they're skipped now. * fix(track): the 3D sleepers laid only for a renderer which draws them Only the OpenGL 3.3 renderer draws the beams. With another one a track set to them lost its ballast to them, lowered or not laid at all with sleepers3dbed no, and nothing was drawn in its place. Draws_Timbers() of the renderer tells now, and where it's false the tracks keep their ballast, as with sleepers3d none. * fix(render): the submodels of a timber model left as they were after its parts are drawn They were all made visible after a part was drawn, the ones the model hides itself too, like Light_On, while the same model may stand in the scenery. The submodels of the top level besides the parts are listed as the model is loaded, hidden while a part is drawn and given back their own visibility after. The parts have to be at the top level of the model for that; a model with them deeper is logged and drawn whole. Render_Timbers no longer looks the model up under the lock for every run of tracks, the name set is enough there. * fix(render): a vertex whose faces give its texture no direction gets a tangent across its normal, not a NaN one The cut ends of the rails have one spot of the texture on all their corners, so their tangent came out of normalize() as NaN. The normal-mapped shaders then shaded them with a NaN normal: about half of the vertices of the cuts and frogs, and the end faces of the rails. * feat(track): the frogs cut from the rails turned on with frogs in eu07.ini, no longer switched off in the build frogs yes cuts the rails of the plain tracks and of the switches with the key frogs where they cross other rails, into frogs, wing rails and check rails. It's off by default: the rails are laid whole as before, the blades of the switches with the key are shaped still. * refactor(editor): the track mode file split into the files of its tools, the code as it was A pure move, so that the commits after it show what changes in each tool rather than a 4800-line file rewritten. The member functions of editor_mode go to the file the editor of this branch has them in: route, straights, lay, switchplace, switchdrive, switchtool, trackgizmo, and the rest stays in editormodetrack.cpp. The helpers of its anonymous namespace go to editormodetrackshared.h, as they were but inline, in namespace track_mode, which the files use. No line of code changes; the files add only their license, includes and the using line. * feat(editor): the groundwork the tools of the editor share - The tool interface (editortool.h), the gestures of the mouse (editorgestures.h) and what the modes share (editormodeshared.h); the projection, viewport, selection and texture picking taking them up. - Scripted input (scriptedinput): the input of a selftest script fed to the editor as if typed and clicked, the real mouse and keyboard ignored meanwhile; EU07_EDITOR_SELFTEST_HIDDEN draws into a window never shown nor focused. - The ui layers and panels of the editor, its settings, icons and the info of the includes; the layers of the scenery and their saving; the launcher mode. - utilities: user_cache_path (the cache folder of the system for the user) and the helpers of the translations. - stb_image: the gif loader takes the frame two back from the frames it decoded, not from before its buffer. - tools/editor: the scripts making the headers of the drives, the turntables, the editor and its usage. - Unit tests: test_area and the stubs of the editor the tests link. Not built on its own: the tree builds again with the selftests commit, the one before the translation. * feat(editor): the tracks laid along an alignment, to the PKP PLK norms, with their grade line and the ground - The alignment of the laying (editorAlignment, editorAlignmentStore): straights, transition curves and arcs with the cant of the norms for the speed, the radius below the minimum for it a warning; the lay, route and straights tools build on it, the route plan reading the curves going on from the tracks adjoining. - The grade line (editorProfile, the profile and gradeline tools): fitted to the terrain model or edited by hand, the tracks fitted marked in the scenery (//$f), the shared grade lines of nearly parallel tracks (//$n). - The ground under the tracks (editorGroundFollow, trackbed): the terrain drawn to the tracks and restored, the tracks put onto the terrain. - Connections between tracks (editorConnections, the connection and connection curve tools), the track presets, the shape of a track (editorTrackShape), digitizing tracks from the orthophoto, the properties sheet of the tracks (trackprops) and the track ux. - Unit tests: alignment, ground fit, heights, with the data of two fits. Not built on its own: the tree builds again with the selftests commit, the one before the translation. * feat(editor): the switches placed, slid and designed from their templates - The switch templates (editorSwitchStore, the template tool): the catalogue switches and the user's own, kept with the settings; the designer (editorSwitchDesign) with a drawing of the dimensions, a and b typed in with the shape making up the rest, a switch clicked off the orthophoto. - The curve of a switch laid into a curve (editorSwitchCurve), placement on a straight or into a curve, slide along it, crossovers and double slips (switchplace, switchslide), the drives of the switches (switchdrive) and the records of the switches placed (records). - Unit tests: test_switch_curve. Not built on its own: the tree builds again with the selftests commit, the one before the translation. * feat(editor): the tools of the infrastructure beside the tracks The gauge, speed, joints, lineside, parallel tracks, vehicles, signals, turntables, sweep and road tools with headers of their own; the kilometrage of the lines (editorKilometrage, the km tool); the infrastructure, roads and speeds behind them (editorInfra, editorRoad, editorSpeed). Not built on its own: the tree builds again with the selftests commit, the one before the translation. * feat(editor): the terrain model of geoportal.gov.pl and the orthophoto downloaded for the editor - editorNmt: the squares of the terrain model at 1 m (NMT GRID1, the WCS service of geoportal.gov.pl) fetched by two workers, kept in editor/cache/nmt/grid1 of the game folder, the heights of the scenery taken from them; the nmt mode loads it along the tracks or around the camera. - editorHttp: the HTTP client of both, WinHTTP on Windows, libcurl elsewhere where it's built with it; without it the caches only. - The orthophoto: its cache moved to the cache folder of the system for the user, the download area a polygon on the topo map (//$a) filled in the background, the 4K imagery, the tiles waiting outlined on the ground. - editorGeoMap: the topo map of the top view; heightmapterrain and the terrain streamer grow the terrain made from the model around the camera. Not built on its own: the tree builds again with the selftests commit, the one before the translation. * feat(launcher): the scenery wizard picks the place of a new scenery on the topo map the editor shares The wizard drops its own map download and decoding for the topo map widget of the editor (editorGeoMap). The place clicked becomes the geographic reference of the new scenery (//$g PUWG1992), and the scenery starts with the orthophoto of the editor on (//$o), lying under it in place. Not built on its own: the tree builds again with the selftests commit, the one before the translation. * feat(editor): the tools wired into the editor mode and the build editor_mode takes the tools of the commits before: its header declares them, editormode.cpp and the track mode drive them, and the renderers draw their overlays (opengl33 and legacy). CMakeLists lists the new sources and adds WITH_EDITOR_SELFTESTS (off by default); the unit tests build the new test files. Not built on its own: the tree builds again with the selftests commit, the one before the translation. * feat(editor): the selftests of the editor split by what they test The scripts of EU07_EDITOR_SELFTEST run the commands of editormodeselftest*.cpp: scene, track, rails, join, switch, signal, sleepers, sweep, terrain, monkey. The code is in every build; only with WITH_EDITOR_SELFTESTS=ON does the editor read the variables and run a script. The selftests of master now need the option too. The tree builds again with this commit. * feat(editor): the Polish texts of the editor, all of them in one update of editor_pl.po * fix(editor): the marks of the editor moved off the letters the starters read, and its lines told by their words The starters read some letters in a scenery file: the Starter the title //$n, the attachments //$f and the old scenery //$a, StarterNG and the launcher of the game the attachments //$f and the title //$n. The editor wrote its download area, shared grade lines and fitted tracks under them, and took every line of those marks as its own: saved, a scenery lost its title and attachments, and the starters showed the lines of the editor as them. - The download area is //$z, the shared grade lines //$w, the fitted tracks //$t. - Their lines and those of //$o are told by their first words, as //$h, //$r and //$k were: //$o only as "on 0" or "on 1", the origin or the settings of older builds after it, so a trainset described as "on ..." isn't taken. - The lines older builds wrote under //$a, //$n and //$f are read only by the words the editor wrote in them, or by its own comment line before them, under the new mark. Each save writes them again with it, also when the editor didn't change them; the lines of the starters stay. * fix(editor): a square of the terrain model cut short isn't read, and the squares are kept in the user's cache The service puts the directory of its GeoTIFF before the pixels, so a file cut short by a write or a fetch broken off was read whole, the pixels missing coming out as heights of 0 m, for good. - The reader (editorGeoTiff.hpp, with unit tests) wants all the strips the rows need, each within the file. - A square is written under a name of its own and renamed. - The squares are kept in the user's cache folder (nmt/grid1), as the orthophoto, since the game folder may not be writable; without one, in the game folder as before. The ones older builds kept there are moved over as each is asked for, a damaged one deleted. - Capabilities that didn't come aren't kept as the fallback name for the session: the next square asks again. * chore(editor): the http client said to serve the terrain model and the topo map too, the gif fix of stb_image marked local - CMake names the orthophoto, the terrain model and the topo map as what goes without libcurl. - The fix of the gif frame two back in stb_image is ours, not upstream's (v2.30 still has the old line): a comment at the line says so, for an update of stb_image to keep it. * fix(editor): the lines moved off the letters of the starters in a merged layer written once, not again with each save A merged layer's text goes into the file of its target on save, and the target is read again; the marked lines of the merged layer were dropped only for the marks the editor had changed. The lines moved to the new letters stayed with their old places, and the next save of the session wrote them into the target once more. - After a save, the marked lines of every merged layer are dropped; those of its target are read again from its file. - The lines of a dead layer aren't written again. - The selftest layermerge merges the layer of one file into another's, as the layers panel does. * feat(editor): the station as the signalling sees it, found from a switch of it, and its schematic editorStation: the switches joined by plain track no longer than 1.5 km, the tracks between them and the lines leading out, 400 m of each beyond the outermost switch; laid out as a schematic along the main track through the station. The track circuits, the signals and their lights, the lengths of the station tracks and the lines to the next stations are worked out from it for the signalling tool. Nothing uses it yet: the signalling tool, wired in the next commit, does. It builds on its own. * feat(editor): the signalling of a station in the Signalling tab, laid out from a switch of it as on the lines of PKP PLK LMB on a switch in the Signalling tab opens its station: the schematic in a window of its own, the name, the code, the line and the km of the station, and the steps of its signalling, each one step of undo: - the switches numbered along the station after its code, bpd_1, the parts of a slip bpd_15a..d; the drives and the objects naming a switch follow it, events written by hand keep the old names; - the tracks cut at the joints of the track circuits, Ie-4, and the circuits named, bpd_iz1, bpd_it1; - the entry, exit and shunting signals placed and named, A, F1, Tm1, from the templates chosen; - the signals of the lines out: the automatic block of three or four aspects, the block sections no shorter than the braking distance, or the semi-automatic one with a warning disc; block boundaries drawn by hand; - the lights each signal needs for its routes, Ie-1 and Ie-4 § 8, its template fitted to them; - the SHP track resonators the signals lack, rezonator.inc; - the lengths of the station tracks as a table, and what the station and its lines still lack, with Repair. The stations described are kept as //$s lines in the files of their layers. * fix(editor): the signals of a station and of its lines not placed with no template for a kind, no track cut for them first - Set the signals and Set the line signals cut the tracks first, and only then found no template for a kind. They stopped there, but the cuts stayed as a step of undo. Now they ask for the templates first, by the lookup signal_batch() uses (signal_template_for(), behind editor_signals::signal_templates_missing()). Without one nothing is cut. - Set the signals and Set the track circuits again under Track lengths had the ids of the buttons of the steps above them. ImGui flagged them when hovered. Each now has an id of its own. * fix(utilities): win1250_to_utf8 turns the polish letters into utf-8, not into themselves utilities.cpp starts with a byte order mark, so the compiler reads it as utf-8. The game's targets don't get /utf-8, though: set_target_properties(... COMPILE_OPTIONS ...) in the MSVC block of CMakeLists.txt replaces the options add_compile_options gave them. So the string literals went into the program in the code page of the system, windows-1250 on a polish one, and the map of win1250_to_utf8 turned each letter into itself. What read windows-1250 through it got no utf-8: the names, descriptions and categories of the sceneries and the names of the textures in the launcher, and the descriptions of the templates in the editor. The editor writes such a description back through utf8_to_win1250, which makes a question mark of each byte that doesn't start a utf-8 sequence, so the letters it had read unchanged didn't come back. The utf-8 sequences are written as bytes now, the way utf8_to_win1250 has them, so they don't depend on the options. The options stay as they are: with /utf-8 other literals of the files with a byte order mark would change, the "±" of the table of Bezogonkow would take two bytes and move the letters after it. The unit tests check the letters and that the text given is valid utf-8. (cherry picked from commit |
||
|
|
80eceaa182 |
Merge pull request #313 from miloszunio/pr/perspective-pan
feat(editor): the wheel held and dragged pans the perspective view too, the ground under the cursor going along with it |
||
|
|
6fbd4082ed |
Merge pull request #310 from miloszunio/pr/road-points-under-terrain
feat(editor): the points of the roads picked on the screen, also under the terrain; Alt+drag their height |
||
|
|
b8b6b3aa76 |
fix(editor): a road point picked on the screen only when nothing is under the cursor, and not through it; Alt+drag dropped with Esc, the work area or the window, no undo in the middle of it
The click takes the point by the ground clicked, then the piece or the junction under the cursor; the point nearest on the screen only when there's none, no farther than what is under the cursor and a bit beyond it, by whole pixels first and the range then, so the order of the roads doesn't decide. The ends of the pieces are gone through without looking for the repeated ones (editor_road::each_joint), joints() isn't needed. Esc, the road window closed, another tool or the track work area drop the drag; Ctrl+Z and Ctrl+Y wait for its end. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DDcMn1Q7wdYkbxDUWscNHZ |
||
|
|
bd1d65cf15 |
fix(editor): no pan of the perspective view started on the sky, where the depth keeps the last hit
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DDcMn1Q7wdYkbxDUWscNHZ |
||
|
|
b251b6fe42 |
feat(blackbox): a black box of the session: the run, the cab, the signals and the stations to a file (#322)
* feat(blackbox): a recorder of the run, the cab, the signals and the stations to a file With the physics logs on (and the new eu07.ini setting blackbox, on by default), the simulator writes a black box of the session to physicslog/*.blackbox: the scenery map (tracks, signals, W4 stop points with their heading, W6 horn points), the timetables of the user's train, and at 10 Hz the cab of the vehicle the user sits in (speed, controllers, brakes, pressures, lights with the pattern the run asks for, the movement kind), the AI's reference for the same place (target speed, next limit, braking distance), the consist, the cameras and the vehicles around. Changes go in as they happen: switches, signal aspects, commands, signals passed with their aspect, stations stopped at, passed or missed, horn requests, the autopilot switched on or off, couplings and vehicles removed. The driving aid's next speed limit moved from the UI panel to TController::next_speed_limit(), so the panel and the recorder read the same. The format is described in blackbox_doc.md; the writer and the reader of the records have unit tests. * fix(blackbox): the aspect a signal had when passed, the lamps the ends have, vehicles taken off - A passed signal is written with the aspect the train had of it, kept in the speed table, not the one its memory cell shows when the pass is noticed: by then the train itself on the track behind has often set it to stop, and most passes were written as at stop. - The cab record gains the lamps the vehicles at the head and the tail have at their outer ends (136 bytes), so a reader can check the light pattern against them as the driver does (no upper headlight, the auxiliary lamps, the rear-end signals only). - A vehicle taken off the scenery and still pointed at by a coupler or the camera gets no new number; the camera lets go of it. - The timetable written before a station goes under the vehicle the user is in now, not the one of the last look. - The file buffer is given once the file is open: MSVC passed over one given before. - The doc tells the AI fields before the consist is started and when entering a vehicle is a driver change. * fix(blackbox): the stop of an automatic block signal passed is written as a stop The speed table keeps the stop of an automatic block signal (SetVelocity 0 x) as the speed allowed after it, with spStopOnSBL; a pass of it was written as that speed with no flag. It is written as 0 with the flag of an automatic block stop again. * feat(blackbox): the doors, the brakes of the whole train, a diesel's engine and the rest of the cab The cab record grows from 136 to 190 bytes, so that a reader can check everything the driver did: - the doors: the permits on each side, the departure signal, the steps, the door lock and whether the doors are locked; - the brakes: the equalizing reservoir of the driver's valve, the main reservoir pipe, the highest brake cylinder pressure of the train, the hand brake, the releaser, the setting (G/P/R/Mg) and the mode (PS/PN/EP/MED); - what drives the vehicle (electric, induction, diesel, diesel-electric, steam, none), its power, a diesel's oil pressure, water, oil and engine temperatures, overheating, fuel and oil pumps, clutch and torque converter, the motor fans; - the cruise control and its speed, the integrated driving handle of a unit, the radio channel, the horn's tones. New device bits use the upper half of the 32-bit field; the new fields come at the end of the record, so older readers still read it. * fix(blackbox): the driver's valve field is what its gauge shows, the radio channel has no none Handle->GetCP() is the equalizing reservoir of most valves but the time reservoir of the FV4a, empty but after an overcharge: the field is named and documented as what the valve shows. With no driver the radio channel reads as the first one, not 0. --------- Co-authored-by: maj00r <maj00r@host> |
||
|
|
fabbfdc782 |
feat(editor): the wheel held and dragged pans the perspective view too, the ground under the cursor going along with it
Pressing the mouse wheel and dragging pans the top view; now it pans the perspective view as well. The camera moves over the ground, its height and its turn kept, by as much of the ground as the cursor crosses where it was pressed: metres to a pixel taken from the distance to what is under the cursor, and a pixel up the screen counted as more of the ground than one across as the camera looks down less steeply. With nothing under the cursor (the sky) it doesn't start. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DDcMn1Q7wdYkbxDUWscNHZ |
||
|
|
6684baefc3 |
feat(editor): the points of the roads picked on the screen, also under the terrain; Alt+drag their height
The points where the pieces of a road meet were picked only by the ground clicked: one more than 3 m above or below the ground under the cursor (a road taken down into a cutting, under an embankment) couldn't be picked again. Now the point nearest to the cursor on the screen (within 12 px, the one nearer to the camera of those about as near) is picked first, the ground as before after it. Alt+LMB on a point and dragging up or down changes the height of the selected points (Ctrl: ten times finer); the change shows as yellow lines and a label by the cursor while dragging, and is applied, as one step of the history, when the button is let go. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DDcMn1Q7wdYkbxDUWscNHZ |
||
|
|
58e4bbff49 |
fix(editor): a model turned with the gizmo about the vertical axis no longer jumps back and forth
The angles of the whole gizmo matrix were decomposed every frame and the model was turned by their difference from its own. The decomposition gives the angle about the vertical axis only within -90..90 degrees: past 90 it comes out as 180 - angle with the other two axes turned by 180, so a drag one way turned the model back and flipped it. The turn is now taken from the delta matrix of this frame (small, so its angles decompose with no ambiguity) and wrapped to -180..180. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DDcMn1Q7wdYkbxDUWscNHZ |
||
| dab227d16d | Editor: keep the terrain palette rotation/repeat values when the slider is released | |||
| 7b9eaf1ccb | Editor terrain: area fill with blurred or sharp edge, texture rotation | |||
| 63302c1ace | Editor terrain: soft stitching to tracks, chunk resolution conversion, water materials | |||
| 243ce636a7 | Editor terrain: level brush with height picker, faster orthophoto fit | |||
| 8cd0bab27b |
Editor terrain: texture browser, undo, conversion from terrain files
- Terrain work mode shows a browser of the textures folder in place of the node bank; textures/materials can be dragged onto the palette entries (replacing the material), the material field and the water material field - Ctrl+Z/Ctrl+Y for heightmap terrain changes: a brush stroke or an operation is one step of the editor history - Ground conversion reads only the files of the terrain directives (.txtf with origin/rotate, or .btf without text), paints the chunks with the materials of the triangles, drops only the shapes of those files - Fix: ground grids converted out-of-range floats to int, so whole-scene queries returned the triangles of a single cell (shifted chunks) - Fix: terrain layers copied from textures already uploaded without their data stayed grey - Fix: ImGui ID conflict between terrain tool radios and section headers - Fix: layers of terrain .txtf files named with the scenery/ prefix and could not be saved - Editor selftest commands for the terrain |
|||
| 35bda3778c | Heightmap terrain: .tch chunk packs, streaming with LOD, terrain painting, water and modifiers - terrain/<name>/terrain.yaml + <px>_<pz>.tch packs of 16x16 chunks (250 m, 0.5/1/2/5 m spacing), slices with crc-32 and optional zstd (vendored zstd 1.5.6 in ref/zstd) - heightmap_terrain [name] endheightmap_terrain directive replaces editorterrain - streamer: worker threads, camera + look-ahead loading, geomipmap LOD with skirts, pooled geometry - mat_terrain shader: up to 8 painted layer materials per chunk via texture arrays (opengl33); other renderers fall back to the dominant material - water bodies (outline + level), terrain modifiers (vertical profile shaping kept non-destructive) - F11 Terrain work mode rebuilt: chunks, sculpt, smooth, paint, point spacing, water tools | |||
|
|
e910615bf6 | removed draw limit in track editor | ||
| 1c28809dd7 | Sonar fixes | |||
| ff25e71e90 | Merge branch 'feat/modern-editor' into feat/mini-generation | |||
| 3e3317d26f | feat(editor): the toolbar as buttons with icons and names, the chosen tool standing out as the chosen field of work does, the names left out when the row is too narrow for them; the fields of work with icons of their own (surroundings, tracks, roads, terrain) and both rows captioned at their left end (work modes, tools); the tools of the toolbar and of the left edge of the 3d view from one list; Polish translation | |||
| 645a54a739 | feat(editor): icons over the 3d view: the tools of the field of work along its left edge (the edit modes of the surroundings, the track tools, the road tools with the lanes, the terrain tools with the orthophoto), the modes of the gizmo at its top, the axes of the world as the camera sees them in its top right corner, a click on one looking along it, with the top view under them; the icons drawn by editor/icons/editor_icons.py into a png which CMake writes out as an array built into the executable; the gizmo modes and the top view left out of the toolbar; Polish translation | |||
| f2e73812d9 | feat(editor): View menu with the top view, the lanes of the roads, the structure gauge and a window of the weather and time (time of day, day of the year, visibility, clouds, air temperature, seen in the editor only); the orthophoto settings in a window of their own again; the tracks and roads menus left out, their tools being in the row of the field of work; End drops the models onto the same ground the insert puts them on, the terrain tile models and the terrain patches of the editor included; the loading screen kept in the main window; Polish translation | |||
| f94100ffe7 | feat(editor): more models selected at once (Shift+LMB), moved and turned by the gizmo together, undone in one step; Ctrl+C / Ctrl+V copy the selected models with their groups and paste them at the cursor; Ctrl+G groups the selection, Ctrl+Shift+G takes a group apart, groups written to the scenery as group ... endgroup and loaded as groups of their own; End drops each model of the selection and of their groups onto the ground; menu of the selection at the cursor on Ctrl+RMB; Edit menu with undo, redo, the clipboard, grouping, deleting; Help > Keyboard shortcuts (F1) with the keys of every field of work, F2-F5 choose the fields of work, the tracks menu lists the track tools with their keys, the keys and descriptions in the menus and tooltips; self-test commands for the selection; Polish translation | |||
| 791d5d052c | feat(editor): fields of work in a row of their own over the toolbar (surroundings, tracks, roads, terrain), twice as high, with bigger bold text, and the tools of the one chosen in the toolbar under it: the edit modes of the node bank, the track tools in groups with the vehicle and the structure gauge, the road tools with what the place tool puts, the terrain tools (sculpt, smooth, chunks, orthophoto); the tool options window keeps the settings of the tool; the node bank shows a big preview of the entry pointed at for a moment, with its model and skin; the green colours by default again; Polish translation | |||
| f184ce7a6a | feat(editor): colours of the editor: amber accents on grey panels as in the design of the layout, the rest of the simulator stays green (colours of the ui chosen by the ui of the mode drawn; Editor Settings > General, kept in eu07_editor.ini), docking preview in the accent colour in both; keys 1-5 choose the edit modes in the order of the toolbar, shown in its tooltips; Mode windows merged into Windows: the windows of the editor, model sets among them, window layout reset and unpinning of the docks; Polish translation | |||
| 4b451622de | feat(editor): pins of the docks: an unpinned dock hides its windows in a strip at the edge of the main window, a tab of the strip shows its window over the 3d view when pointed at for a moment or clicked, and it goes back when the cursor leaves it or on a click elsewhere, but not while it's in use (button held, popup open, typing, drag); pin in the tab bar of each dock, or Unpin in its window menu where the tabs leave no room; pin in the title of the shown window, or docking it by hand, puts the dock back next to the docks at that edge; Ctrl+Space (also in Mode windows) unpins all docks for the most of the view, or pins them back the way they were; unpinned docks kept in imgui.ini, cleared by Reset window layout; Polish translation | |||
| 4e69d8f86c | feat(editor): fields of work chosen in the toolbar, one at a time: edit modes, tracks, signals, vehicle, roads, terrain; Toolset split into Tool options (tools of the field of work and the gizmo), Inspector (what it has selected: node with array and bend, path, road) and Node bank (list only); Scene window with the models of the scenery by layer and group, filtered by name or uuid, a click selects, a double click flies the camera to it; track window replaced by a palette of the track tools in groups (build, by the track, checks) with the tools under it, the selected path in the inspector, results of the speed, joints and infrastructure checks in a docked window; road window split into the tools in tool options and the selection in the inspector; terrain tools moved out of the editor settings into tool options together with the orthophoto settings (map menu opens them), leaving the terrain puts sculpting and chunk editing away; default layout: tool options and scene on the left, inspector on the right, node bank and checks at the bottom; Polish translation | |||
|
|
5d075e75fe | show compass in ortho view | ||
|
|
95d4581da2 | pan ortho view with middle mouse | ||
|
|
4d7f5f0f0c | move parallel track to lay and selection | ||
| 60c7250683 | feat(editor): docked layout: windows of the editor docked around the 3d view (dockspace over the main window, default layout built when there's none or on Mode windows > Reset window layout), menu shown all the time, toolbar with the edit modes, track and road windows, gizmo operations and the top view, status bar with the outcome of the last operation and the selected node; dockspace submitted also when the frame was started by the ui of another mode, so docked windows don't come undocked on the change of mode; stable ids of the editor windows, no auto resize of the dockable ones; hints of the track and road tools placed in the part of the window the 3d view is seen in; Polish translation | |||
| 476f3bf1b7 | feat(ui): panels can be docked together and dragged out of the simulator window into windows of their own (imgui multi-viewports, ui.viewports yes by default, off where the renderer or the platform can't do it, e.g. wayland); imgui coordinates kept relative to the main window by the glfw backend, so the overlays, picking and gizmo of the editor work unchanged; overlays of the 3d view drawn on the main viewport; keys pressed in the separate windows passed on to the simulator, so the shortcuts of the editor work there too | |||
| 344034ec70 | feat(ui): imgui 1.91.9b-docking in place of 1.73: local changes of the backends carried over (glad as the gl loader, srgb and gamma of the ui, gles glsl string), BufferingBar/Spinner kept, imgui_tables in cmake; cursor position, cursor enter and focus of the main window passed to the glfw backend, which works with events now; code adapted to the api: ImGuiListClipper::Begin, BeginListBox, ImTextureID as an integer, ImageButton with an id, ImGuiKey without GetKeyIndex, logarithmic sliders in place of the removed power argument; ImGuizmo with the math operators defined before imgui.h and SetNextFrameWantCaptureMouse | |||
|
|
c11480ce2e | fix flipped ortophot + clear cache | ||
|
|
b02fe0ac2b | feat(editor): Signals mode of the Tracks window (H): semaphores, block, warning, shunting, stop, substitute signals and repeaters placed by the track from the templates of the scenery, described by //$e signal: (kind, mount, lamps, lean, the event the train reads them by) which tools/editor/signal_headers.py writes into them; a click by a track puts the signal on that side 2.25 m from the axis at the rail heads, facing the trains which have it on their right, a drag along turns it to the trains going the way of the drag; its (p1)_sem_info goes to event1 or event2 of the path, warning signals and repeaters, which the train doesn't read, get none; a head leaning away from the track swapped for its counterpart; the plate named like the signal; signals dragged along the track with their event, removed with it, renamed in the node properties with it, each a single step of the undo history; Polish translation | ||
|
|
d4791f6a29 | feat(editor): a model or an include standing by a track bent along it (B, or the Bend along the track section of the toolset): it stays where it stood and follows the track, through the joined tracks as far as it reaches; reference point at its start, origin, middle, end or a point picked on the model, across at its origin, the side facing the track, the far side or its middle, up at its origin, bottom, top or the top of its edge by the track; the blue cross of a bent model dragged for its offset, with Shift for its height and with Ctrl along the track, the values shown at the cursor; a bent model clicked to edit; one step of the undo history; scale of the model kept, parts lit only at night left out; edges of platforms told by the name of the model and by the overhang of their edge over the foot: put 1.725 m from the axis at the height the name gives, turned with the edge to the track when they stood the other way; platforms stand on the plane of the rail heads carried on to their edge (PKP PLK ST-T2), the gauge widening led in from the tracks beyond the ends and from the other path of a switch; gaps between the pieces of a sweep filled with the paths which join them; Platforms and models tab left out of the track editor; laid track eased into the curvature of the one it joins with a transition curve; File > Open scenery... starts the editor again with the scenery picked from a list; the camera saved with the scenery; T and Shift+T turn each turntable to its next and previous position by event launchers written on each save; a turntable track deleted with its template; a scenery with no trainset gets a WMB10 on its first track; vehicle placed where the track is clicked; gauge check takes in the bent models; Polish translation of the editor | ||
| 9d6aa24af4 | Merge branch 'feat/modern-editor' of https://github.com/MaSzyna-EU07/maszyna into feat/modern-editor | |||
| 8dd666d4d8 | feat(editor): array of the selected model in the toolset, after the array modifier of Blender: fixed count or fit length, relative and constant offset along the axes of the model, turn per copy, copies following the ground; the array follows its settings until something else is selected or changed, and is a single step of the undo history | |||
|
|
24923dd472 | feat(editor): track editor driven by what the cursor is over: the outline and a label show what a click or a drag does, snapping to free ends on the screen, handles and ends dragged directly, no rotation gizmo; laying from a free end the same in every mode, straight with Shift, the curve of a switch going on past its diverging end; height 0 where there's no terrain; placed switch leaves the switch mode, double slips listed apart, a drive of the switch placed with it by the //$e switch description of its template; compound curves of any number of radii; dragged end of a straight fits the curve beside it; name of a path, followed by the memory cells and the includes taking it; turntable placed from a template described as one, tracks led out of it and the tracks around fitted to it, its positions written to the include; infrastructure bound to the path whose events read its memory cell; terrain made where the route has none and shaped to the formation under the ballast; models along the track over the selected path and on along the joined ones while dragged, rarely used settings folded; vehicles and trainsets placed on any path, switches included, facing the way the arrow shows; joined paths spread into the selection; New scenery in the File menu starts the editor again with the wizard; ortho zoom towards the cursor; scripted self tests; Polish translation | ||
| c4a22eabd5 | feat(editor): nodes placed with the brush and the area fill go without names; name of a model instance set in the node properties and written to its definition on save; redo of a deletion finds nodes which have no name | |||
| 2e631dcbd6 | feat(terrain): binary terrain files (.btf) made out of text terrain files (.txtf) named by terrain directives, checked against length and checksum of the text and loaded section by section when needed; -btf command line conversion; SBT files no longer generated, only loaded | |||
|
|
a13a5548df | feat(terrain): grade line fitted to the ground under the route within the limits; editor terrain shaped to the grade line with a formation and rounded slopes, with one step back; scenery ground triangles of chosen materials converted to editor terrain and taken out of the files on save, with a dated backup of each file; crack-free simplified terrain mesh, terrain streamed as far as the scenery is drawn, the nearest chunks first; smoothing brush | ||
|
|
3731520e33 | feat(tracks): track editor in one movable Tracks window with exclusive modes, a guide of what can be done in the current step and the rarely used fields folded; vertical profile window with the ground of the scenery triangles; plain pieces added at a free end, freehand only on request; curve mode edits the single curve clicked | ||
| 012ffc7470 | Merge branch 'feat/modern-editor' of https://github.com/MaSzyna-EU07/maszyna into feat/modern-editor | |||
| 27a94509c4 | feat(roads): right of way and lane turns at junctions, road weights, kerbs, medians and forking roads, banks to the ground, roundabouts, pedestrian crossings, spawn sets by count; fix(editor): model skin export, placement on the ground under the orthophoto | |||
|
|
d57215877f | feat: structure gauge window in the menu bar, gauge tunnel around the hit, fixed reach | ||
|
|
b0c363b586 | feat: structure gauge along the line of the selected path in the OpenGL view | ||
|
|
c85a52d5b1 | refactor(editor): track observer instead of the function hooks |