With the lay tool on, a scenery with no tracks nor terrain chunks gets the offer of the terrain model and the aerial photos
around the camera; without a place yet it asks for the PUWG 1992 coordinates of this point, as geoportal.gov.pl gives them,
and keeps them as the place of its orthophoto. The offer can be turned off (editor setting terrain_offer). Self-test
nmtoffer.
- editorNmt: squares of 500 m of the NMT at 1 m from the WCS service of geoportal.gov.pl, as GeoTIFF, fetched in the
background, kept in editor/cache/nmt and sampled in the coordinates of the scenery, placed as its orthophoto is
- the terrain panel's Terrain model section: Fit to the tracks moves the model up or down by the median of the
differences to the formation of the tracks (Biała Podlaska, built at 0: -145.73 m, 0.28 m around it); Along the tracks
and Around the camera make the chunks as the model comes in; each path gets its formation and slopes 1:1.5 as a modifier
of the terrain, laid over each other into one corridor, bridges and tunnels keep the model; the orthophoto is turned
on and laid onto the new ground
- the http client of the orthophoto in editorHttp, shared; fill_from_nearest in editormodeshared.h
- after the generator of Hirek (MaszynaTerrainGenerator): the WCS requests, the cache of squares, the corridor by envelopes
- self-tests nmtfit, nmtmake, nmtwait
editormodeselftest.cpp keeps the dispatch, the list of the commands and the step; the groups go to
editormodeselftest{scene,sleepers,sweep,track,switch,join,signal,terrain,rails}.cpp, the sleeper commands (beams,
sharedzones, sleepersbg, beamsnear, sleepercheck) in a group of their own; the frame count and one_line shared through
editormodeselftest.h. The output of geomhash, sleepercheck, wings, space, guards, crossings and switches is the same on the
seven sceneries of the regression.
- the panel shows the scope and what's found first, then Place and Move for all, then each missing or wrong marker with its
own button and a click flying the camera there; the spacing, tolerances, height, model and turn are under Settings
- a click on a green point (no marker) or a red one (marker standing wrong) in the view puts or moves that marker alone
- the check starts around the camera
- one camera flight, fly_to, instead of four copies of it
- self-test fouling show=1 and place=one
- the template list shows the templates of the rail the selected track is laid with (railprofile s60/uic60: 60E1, s49:
49E1, s42: S42), a box shows them all
- the words of the catalogue names are translated (movable nose, long, gauge, blades outside), the kind of a slip or a
crossing its type says already is left out
- shorter hints of the switch tool, of More and of the missing drives
- the switch tool asks what to place: a switch, a slip switch, a crossing or a connection of tracks (crossover, double,
scissors, ladder), with the templates and the options of that kind only and one line of how to place it with the mouse;
the bar of hints says the same, the wheel keys of a connection included; panel in its own editormodeswitchtool.cpp
- templates are listed by their names, the lengths a and b and the rest of the label in the tooltip
- the panel of a selected switch shows its length, its type and its drive; the name, number, rail, kilometre and angle are
under Details
- one toolbar: the tools are no longer drawn a second time down the edge of the view; the track tools show select, lay,
plan, switch and parallel, the others behind More, which starts closed again (setting track_tools_all)
- the infrastructure tool has no button nor key
- the gizmo options start closed, the node bank isn't drawn in the track mode
- no drive models: said in plain words
- self-test switchkind
- sleepers3d / sleepers3dplain / sleepers3dbed in eu07.ini: timbers put together from the begin, main and end parts of a model
and stretched to their length, plain sleepers of their own model; tracks whose plain sleepers would touch are laid as one
cluster, lines of timbers led by priority and turned to the bisectors of frogs and crossings at a limited rate, whole timbers
under crossings, split ones between tracks with room to part them, gaps filled per rail and overlaps shortened or dropped;
clusters worked out in a background thread while driving, on demand in the editor
- the ballast can be left out under the beams (sleepers3dbed no)
- blades get their heel and throw from the switch template or blades <heel> <throw> in the scenery; blades of double switches
run on into the track linking them to the next switch
- rail cutting at frogs, wing rails, movable noses and switch crossings done by one carving pass (RailCarve)
- tint of the rail treads applied to the colour only, without the matte band at the frog
- a switch trailed through with a movable nose set the other way derails the vehicle
- self-tests: sleepercheck, sharedzones, beamsnear, throw, sleepersbg
The frogs, crossings and check rails of feat/rail-crossings next to the track editor and the switch paths made of pieces of feat/track-join-ux. The self-test commands of the crossings (frog, geomhash, frogkey, guards, railtime, crossings and switches 0|1, now called throw 0|1 because the editor already has switches) go into their own group selftest_rails.
The switch, with the switches joined to it, keeps its shape and one grade over its whole length: it is moved,
turned and tilted to the end of the track, and the tracks at its other ends follow it.
Canting a track at its joint with a switch cants the whole switch, its diverging path goes onto the new cone,
and the tracks joined at the other ends of the switch follow it and take the cant at their joints.
The diverging path p3-p4 takes its heights, grades at the ends and cant from the main path p1-p2 (the cone of
its cant) after every gizmo change: grade and cant rings, moving an end and editing a control vector. The tracks
joined to it follow its ends and grades. The grade ring measures along the main path and the gizmo stands in its
middle; the start vector of the diverging path slides along the main one and turns with it.
The rotate gizmo stands along the track. The cross ring changes the grade about the middle or the selected
end, the joined tracks take the grade at the joints; the ring along the track changes the cant of the track
or of the selected end, the joined tracks take it at the joints and ramp it. On a control vector the cross
ring tilts it up or down. Ctrl steps by 5 degrees, 1 per mille, 5 mm.
A regular track draws and saves only its first path; the pieces of a lengthened curve past the first
are now tracks of their own, made and dropped while dragging, taken back by one undo.
W turns the track (about its middle or the selected end) and a selection of tracks, the joined tracks follow.
E lengthens the track at its free end: a straight stays straight, an arc keeps its radius, cant and grade.
The gizmo on a control point moves, turns or lengthens the vector; the control point of the track joined
there turns with it, at a switch the vector only slides along the switch. Straight neighbours dragged along
keep their tangents and become straight again when nothing bent them.
- with nothing under the cursor the height is the mean of the ground found on the nearest ring around the point, 10 to 400 m out, plus the depth of the ballast, instead of 0; the ray of the cursor meets that height
- the ground under the cursor is looked for up to the height of the camera, not only 50 m over the last point
- the height along the new track is a smooth curve through points on the ground under the foot of the ballast, added where the track would hang or sink more than 0.1 m, at least 10 m apart; the paths are cut there, each joint keeps one grade on both sides
- the clicked ends and the free ends joined keep their height and grade as before; no grade limits
- self-test layclicks: how far the foot of the ballast goes over and under the ground along the paths laid
