Fitting the grade line took 3 ms for 250 m of track, 30 ms for 1 km, 65 ms for 2 km and 200 ms for 4 km, and the preview of the lay tool and of the drag from a free end fitted it every frame, twice for the drag; on the terrain model the preview of some 800 m took 10 to 17 ms a frame, the cursor standing or not. Now the frame waits under 1.5 ms for 4 km. The formations of the tracks led into the terrain went through every chunk under them 0.3 s after each click, some 50 ms, while the cursor went on to the next point; they wait for the laying to end. The tracks laid and the terrain are the same as before.
Selftests: perf logs the longest frame and those over 33 ms, fittime the time of the fit by length, terrainhash a hash of the chunks in memory.
A deleted track whose read events or track circuit no other track took says so by the cursor, naming the signals and the circuits, and the editor keeps them for the track laid in its place, within a metre of its axis. The read of each signal goes to the piece by the signal, on the list its facing there gives, so a track laid the other way round keeps the trains reading it; the other events go to the piece at its middle, the circuit to a track lying there for the most part, a new track taking it instead of the one of the track it was made from. It happens in the step which lays the track, so Ctrl+Z takes it back and laying it again gets them again; a track which took a circuit over and is removed by another step leaves it to that step, and the events of a signal taken away stay off the tracks.
The SRK panel of a station lists what it and its lines need: signals no track reads, lines broken off where the tracks go on beyond a gap, tracks of a line of the automatic block in no block section, block sections whose tracks are gone. A row shows the place; Repair has the track by each signal read it again, as moving it does, and sets the line signals again where tracks are in no block section. A warning after an operation shows by the cursor in amber, a refusal in red as before. srkcheck counts these too, srkfix repairs, join takes the height of the ends for sceneries far above zero.
Laid to the norms, the readout says the design speed of the transition curves and of the cant: that of the track the laying goes on from or joins, or the one set for the laying. A new option takes the set speed also on from a track with its own, the new tracks get it; Ctrl+Shift+wheel steps it while laying and turns the option on. The panel shows the speed the laying under way is designed for.
Next to the length and the radius, the readout at the cursor shows the difference of height from the start to the end of the
track about to be laid, the grade along it (one value or the range it goes over) and the speed the sharpest arc lets the
trains through at within the cant and the unbalanced acceleration of the laying limits. The self-test layclicks logs it.
Dragging an end of a straight refits the curve next to it with the cant
and the transition curves recommended for the speed, keeping the curve's
own only where it had some; a plain arc laid freely came out with
transitions. Break and S-curve took the recommended transitions too. The
recommendation of a design not checked against the norms is a plain arc
now, the tools take the norms in effect rather than the ones the design
was last computed with, and the Plan panel calls the automatic choice
"None" in the free design. Self-test: norms free|plk.
The third tool out of editor_mode. It reaches the terrain model and the
places of the tracks on it through the services, the place of a track
for the terrain model is a type of its own now, and the laying and the
switches ask the tool for the kink it allows. A self-test command can
ask to be run again in the next frame, as the check against the terrain
model does while the model comes in.
A touchpad under Wayland sends a scroll as many fractions of a notch.
Shift+wheel took each of them for a step and went round the shapes of
the laid track, the joins and the connections several times in one
swipe; now the fractions are gathered into whole notches and a gesture
moves such a choice one step. Ctrl+wheel steps the radius once a notch.
The 3D zoom measured to the level 0 when nothing was under the cursor,
which in a scenery on the terrain model lies far below or kilometres
ahead, so a light swipe at the horizon flew the camera away. It
measures to the ground under the camera now, backs away by no more than
four heights of the camera over it, and takes at most two notches at a
time. Self-test laystate tells the shape, the radius and the camera.
The joints check also compares the tracks with the terrain model (NMT), every 5 m. Bridges, tunnels and tracks over others are left out.
- Each path lying higher or lower than the model by more than the threshold (0.5 m by default) is listed once, at its farthest place off.
- The places are compared with the same offset the model has against the scenery; a scenery not fitted to the model as a whole is measured about its median.
- The squares of the model are loaded in the background, and the check waits for them with a progress bar.
- These entries can't be fixed from the list. In the top view, the overlay shows the issues over the whole screen.
- Self-test: jointsmodel <threshold>.
Labels:
- every button, field, tooltip and message of the editor reread for a beginner: short nouns for the fields with the
sentence in the tooltip, the less used options under More settings, one glossary (field of work, template, track,
grade), sides told from directions, degrees and per mille as signs, messages built from one format string
- plural forms through STR_P; the last entry of a po file is read too, and the Polish plural rule is in the header
- lang/editor_pl.po: the code pass entries merged, 391 entries no code uses and 3 duplicates dropped
- roads: the notes and errors naming a road translated; the build options and the layout fold the texture length,
kerb sizes, traffic share, roundabout part, height over the ground and junction speed limit under More settings, the
lanes start folded
Grade lines fitted to the terrain model (NMT), a line or the whole scenery at once:
- fit_ground: a robust fit on nodes 5 m apart; the ground parting from the line (a bridge, a viaduct, a wall) is gone
past rather than followed, the bends keep off the switches as far as their curves reach, a run of bends the same way
is one point of intersection, a curve with no room is as sharp as the room lets it be
- the ends of the line and the other paths of its switches leading into lines fitted already bound the line by what
the tracks between can climb; ends meeting in the plan, laid apart in height by hand, are joined before the run
- apply_profile: the paths are split where split_path takes the parameter (a straight was cut in the wrong place, into
pieces of a few centimetres the game takes for zero length), no piece shorter than the margin; the paths off the
ends of the route are brought to its height
- Bytom: 1600 lines, grade breaks at the joints 89 -> 20; Tarnowskie Gory: 848 lines, 223 -> 3; no step over 2 cm
editormodeselftest.cpp keeps the dispatch, the list of the commands and the step; the groups go to
editormodeselftest{scene,sleepers,sweep,track,switch,join,signal,terrain,rails}.cpp, the sleeper commands (beams,
sharedzones, sleepersbg, beamsnear, sleepercheck) in a group of their own; the frame count and one_line shared through
editormodeselftest.h. The output of geomhash, sleepercheck, wings, space, guards, crossings and switches is the same on the
seven sceneries of the regression.
