A deleted track whose read events or track circuit no other track took says so by the cursor, naming the signals and the circuits, and the editor keeps them for the track laid in its place, within a metre of its axis. The read of each signal goes to the piece by the signal, on the list its facing there gives, so a track laid the other way round keeps the trains reading it; the other events go to the piece at its middle, the circuit to a track lying there for the most part, a new track taking it instead of the one of the track it was made from. It happens in the step which lays the track, so Ctrl+Z takes it back and laying it again gets them again; a track which took a circuit over and is removed by another step leaves it to that step, and the events of a signal taken away stay off the tracks.
The SRK panel of a station lists what it and its lines need: signals no track reads, lines broken off where the tracks go on beyond a gap, tracks of a line of the automatic block in no block section, block sections whose tracks are gone. A row shows the place; Repair has the track by each signal read it again, as moving it does, and sets the line signals again where tracks are in no block section. A warning after an operation shows by the cursor in amber, a refusal in red as before. srkcheck counts these too, srkfix repairs, join takes the height of the ends for sceneries far above zero.
The track mode Kilometrage (X, under More) puts a point of the km where a track is clicked: the line, the km and, at a jump,
the km on from it. The axis of a line follows the main paths of the switches through the tracks of its points; on a
double-track line it runs between the tracks, and where they part on formations of their own and come together again it
runs along the longer one, the shorter one going by its own length with its last hectometre before they meet taking up
the difference (PKP GK-1 6.1.12). The km between the points are stretched to the length of the scenery evenly; the panel
lists the points with the stretch, the 3D view shows the axis, a tick at each hectometre, the points with their km and
the km of the lines by the mouse. Read the km from the posts turns the hectometre posts along the line into the points
of its km, a jump where two runs of numbers meet, and warns of a jump on a curve or at a station (Id-1 § 19). Each change
is a step of undo.
The free laying isn't the default any more. The first time a session opens the laying or the plan, a window asks how the
new tracks are laid, with the two cards of the panels (the norms marked as chosen); a click on one of them takes it and
closes the window, which comes before the offer of the terrain model of a new scenery. "Remember the choice, don't ask
again" keeps it in eu07_editor.ini (track_norms ask, free or plk), and a choice kept follows a later click on the cards of
the panels; the settings of the editor (General) choose between asking and either way. The self-test scripts start with the
free laying, as they were written for it.
M in any tab of the track mode turns the tape on: a click puts its start, the next one its end, at a free end, on the axis
of the track under the cursor or else on the ground. The readout at the cursor gives the distance in plan and in space,
the difference of height and the grade between them and the azimuth, while the second point follows the cursor and once
it's put; a further click starts a new measure, M or Esc puts the tape away. Self-test command tape.
In the top view at a metre a pixel or closer, each curved track of 5 m or more gets "R 600 L 120" by its middle and each
switch its name and its type from the kept switch record ("Rz 60E1-300-1:9 P") by its start, on a dark plate as on a plan.
A label which would cover another one is left out, the switches going first and then the sharper curves. View > Track labels
in the top view switches them off.
View > Track colours draws the rail tracks over the view in bands of the radius of their paths, of their speed or of the grade
along them, from above over the whole view and in the 3D view within 1.5 km of the camera, with the legend of the bands in
the bottom right corner. Plain keeps the lines of the top view as they were. Self-test command trackcolours.
The panel gives the place on the map or typed, the area, one main button, a
progress bar with Stop and a banner over the view while it loads. The terrain
grown ahead of a track goes on at the height of the one beside it and skips
the ground made by hand. The formations follow the tracks moved, laid and
removed, in the same step of the history; a whole load is one step, the
ground grown ahead none.
An error put in the status bar also shows for 4 s by the cursor, and the
refusals the tools kept in their panels (a curve which can't be laid,
a switch which doesn't fit, a signal which can't be moved, a drive
without the variant) go there as well.
Esc in the middle of dragging a point of a track kept the moved point,
and the hint said so; dragging a straight was taken back but left an
empty step in the history; a vertex or the radius grip of a curve stayed
moved in the design. Now Esc puts back what was there before the drag in
all three, and the history doesn't keep a step for it.
Dragging a standing signal over the track takes it to the other side;
the side used to come from where the signal stood, so it never crossed.
The selected signal gets "To the other side" and "Turn around": the
first mirrors it over the axis facing the same trains, the second turns
it to the trains of the other direction and moves its event to the
other event list of the path. Either one swaps a head leaning to the
track for its counterpart, and an include keeps the template its
directive names, so undo brings the old file back too.
The name of a node or "(no name)" was written out in twenty places and
four local functions, a lower-case copy of a text in four files, the
test for a number, the file name of a template made comparable and the
heading of a direction in three and two, the green main button of a
panel in five and the key=value parameters of a self-test command in
five. Each of them is one helper now: name_of, tall_button_height and
main_button with the panel helpers, numeric with format, normalized
with the include helpers, heading_of with the plan geometry and
selftest_values with the tools; lower gives way to ToLower.
The seventh tool out of editor_mode. It reads the selected set of tracks
and the tab shown through the services, digitizes the tracks it lays and
refreshes the plan after it sets one parallel to another. The panel shown
for two selected tracks is a public call of the tool, and the self-test
command parallel moves with it and lays the same tracks as before.
The fifth and the sixth tool out of editor_mode, the two lineside ones
sharing their file. Placing, moving and taking out the templates which
stand by the track become services of the editor, with the template
types of their own, and so do the tab of the track tools shown, the
ground under a point and the first step done. The context menu, the
click on a fouling point in the view and the lineside tabs go through
the public calls of the tools. The self-test commands hekto and fouling
move with them and log the same as before.
The fourth tool out of editor_mode. The track under the cursor and the
first steps of the tutorial become types of their own, which the editor
gives to the tools, and a tool shown as a tab of the lineside panel keeps
its open and expanded flags in a tool_tab. The trainsets waiting for the
save are handed to the editor by the tool, which hears back when they
were written. The self-test command trainset moves with it.
The third tool out of editor_mode. It reaches the terrain model and the
places of the tracks on it through the services, the place of a track
for the terrain model is a type of its own now, and the laying and the
switches ask the tool for the kink it allows. A self-test command can
ask to be run again in the next frame, as the check against the terrain
model does while the model comes in.
