765153ad91
Merge remote-tracking branch 'origin/feat/switch-blades' into feat/renderers-cleanup
2026-10-29 23:55:04 +01:00
maj00r
80379b991c
feat(editor): the work of the editor sessions not committed yet, as it stands: a curve traced on from the end of the diverging track of a switch goes on at its radius with no transition in, or from a straight right at the switch (alignment start_held, fit_going_on), the plan taking an end adjoining R 10 km or more for a straight; the switches and slips laid into curves, slid along them and laid alone on one straight (frame_path, switch slide); the route plan reading curves going on from the tracks adjoining, the kept designs taken or forgotten; the orthophoto and terrain model settings, downloads and layers, the tracks onto the terrain; the curvature of a path in the plan (bezier::plan_curvature); the Polish texts of all of it. Not built as committed
2026-10-29 22:19:06 +01:00
maj00r
2eda26b94c
feat(editor): a warning of the sudden change of the cant deficiency right behind a switch, as ST-T1-A6 sees it (9.11): a track laid on from the end of the diverging track of a switch, or into it, is checked by switch_curve::check_exit from the end of the curve of the switch, a straight frog's length before its end, to the first sudden change of the curvature of the track laid. Two of them nearer than the intermediate element of table 9.16 (6 m in track connections up to 60 km/h) are taken together, else each one alone, against table 9.15 (130 mm up to 60 km/h), at the speed of the laying or of the diverging track of the switch, the lower one. The view tells of it by the cursor while the track is extended or laid, the status once it's laid; a transition out of the frog straight makes no sudden change. Selftest: from a Rz S42-190-1:7,5 with a frog straight of 1.66 m a curve the other way of R 200 m warned of 194 mm together, the same way none; from a Rz 60E1-190-1:9 with 6.09 m a curve the other way of R 200 m none, of R 120 m warned of 157 mm
2026-10-29 22:16:19 +01:00
maj00r
667e433af9
feat(editor): a slip is selected, slid and deleted whole: any track of it picked shows all of it selected, editor_mode::slip_of finding its switches by its record, the tracks between them and its four ends. Dragged along, the slip moves along its first track with the straights out to the joints of its template and its crossing track, as far as that one goes on into tracks with their ends free, the straights of its first track before it and past it lengthened and shortened, a metre of them kept; one bent into a curve isn't slid, nor one whose crossing track is joined on beyond it. Deleted, it leaves its two tracks crossing from end to end in its place, kept in the scenery as a crossing Skrz, as a switch leaves its main track; Shift+Del takes all of it, Ctrl+Z brings it back. Selftest: a Rkp laid with its crossing track slid 5 m on and 3 m back, the joints of its template with it, walked through; deleted into a crossing Skrz 1:9 walked through, back with Ctrl+Z; a Rkpd at a crossing of straights with free ends slid 2 m, deleted into a crossing
2026-10-27 19:40:56 +01:00
maj00r
7b11db566e
feat(editor): a slip Rkp or Rkpd bent into a curve of a side track: dragged on a curve with a slip armed it's laid out on the tangent to the curve where it was pressed and bent onto the curve as a switch laid into one is, editor_mode::frame_path laying a path of a template into the curve for both, its crossing track coming along with its ends free, ahead to the side of the drag, the slip curve of a single slip on that side, the straights of both tracks out to the joints of its template. A crossing goes only where two straights cross, a curve as sharp as the slip curves is refused. As it's dragged the view tells the radii of its tracks and slip curves, its cant and what switch_curve::check_slip says, the 11.4 pkt 4b of ST-T1-A6 among it; laid, the status the same. A slip bent into a curve isn't replaced by one laid out of straights. Selftests switchcurve, bladetips: a Rkpd 49E1-190-1:9 in R 800 m with its slip curves of R 154 and 249 m and the warnings of 11.4 pkt 4b and table 9.2, one of R 300 m in R 800 m with no warning of table 9.2, a Rkp in R 4000 m, the blades from 1.248 m on all of them; refused in R 150 m, a Skrz refused
2026-10-27 19:39:38 +01:00
maj00r
7f6a8736ca
feat(editor): a slip goes only where the straights cross at the skos of its template: a Rkpd 1:9 was laid at a crossing of 1:7 or 1:14 as well, shaped for the angle of the tracks there into no slip of the catalogue. The straights crossing at a skos more than 0.14 deg off it, half of what keeps 1:9.51 and 1:10 apart, are refused with the skos they cross at and the slip of the same kind made for it, of the same rail and radius first, or none; a double slip replaced by one of another skos likewise. The panel and the hints say the slip goes at its skos. Selftest: a Rkpd 49E1-190-1:9 laid at 1:9 and 1:9.08, refused at 1:7 with no template for it and at 1:9.51 with Rkpd S42-230-1:9,51 fitting
2026-10-27 19:35:01 +01:00
maj00r
f8a12107a0
feat(editor): a switch laid with no track there, and no switch laid by a click: a press on the ground with a switch armed lays the switch there, its start where it was pressed, the direction of its main track taken from the drag once it's 4 m long and held, the drag sideways then giving the side of the diverging track, back by the start the direction free again; pressed by a free end within 5 m it goes on from that end in its direction and grade, joined to it. Its ends are left free to lay on from, styled after the track it goes on from or as the lay tool lays its tracks (editor_track::create_switch with a path_style). A press let go within 10 pixels places no switch, a slip at a crossing included, which was laid at once on the press: it's laid once dragged, its straights shown meanwhile. The hints and the panel tell of both. Selftest switchfree: Rz 60E1-300-1:9 on the ground with its four ends free, from the free end of a straight joined and walked through; a click on a straight laid none, a drag laid z1
2026-10-27 19:33:23 +01:00
maj00r
ef592e6479
feat(editor): the drive of a switch stands by the tips of its blades, not at the joint before them, and goes with the switch deleted. A drive placed, changed or carried along with its switch is set where the blades begin, as they're shaped or where the diverging track is broken at the tip of a planed blade, along the main track there, its heading and its tilt taken there; the drives the earlier versions of the editor set at the joints are moved there once, as the scenery is opened and the templates are known, with no step of the undo history, to be saved with it. Deleting a switch, a double switch or a set of tracks takes the drives of the switches along in the same step, Ctrl+Z brings them back. The joint before the blades and the tips of the blades of the switch being placed or the one selected are marked across the track in the view, so the tips seen on the photo aren't taken for the start of the switch. Selftests bladetips, drivetips; on a copy of test42 the drive of z1 went from the joint to 1.248 m, deleted with z1, back with Ctrl+Z
2026-10-26 20:40:37 +01:00
e19c788f30
Catenary as plain node entries in scenery files
2026-10-26 20:23:26 +01:00
d794b1e736
Catenary editor: keep catenary parts out of node editing, pick and drag anchor poles
2026-10-26 19:51:15 +01:00
maj00r
aed2cfad2c
feat(editor): a track deleted cuts the design kept for its line down to the tracks left along it, in the same step of the undo history: a design keeps the stretch of its line it stands for (//$h kept <from> <to>), a track deleted in the middle parts it in two, one at an end shortens it, a design with no track left is forgotten. The geometry stays as designed, only its reach changes. A design cut down isn't taken whole by the route plan nor merged with a new one nor carried along by a switch slid, and gives no designed curve to the tracks left of a curve it cut, which are recognized as they lie: a track laid by hand into the gap is never pulled back to the old shape. The status tells of it. The //$h click lines are the editor's own now: read back with their design, and written once on save instead of staying behind and piling up. Selftests on a copy of wgr.scn: a track of a compound curve deleted in the middle, undone and redone, one at an end, all of a piece, saved and read back
2026-10-26 19:50:35 +01:00
maj00r
eb3d3eb1e0
feat(editor): in the mode of the straights the line from the end of the diverging track of a switch begins with a straight right at P4, the curvature jumping as at the start of the switch, a bend clicked getting its own curve where it was clicked; only a curve traced from P4 goes on with the curve of the switch. Dragged from a free end the shape follows the mode of laying: a straight in the one of the straights, from P4 right from its end, an arc and a straight in the one of a curve (Tab), from P4 the curve of the switch going on; the four shapes to pick under More settings and with Shift+wheel are gone, which only muddled the two ways of laying. Shift+wheel picks the way of joining over another free end. The hints, the readout by the cursor and the table of the keys say so. Selftests of P4: a straight of 100 m and of 15 m laid right from P4, bends of 8 degrees either way after a straight, dragged straight; traced and joined from P4 the curve of the switch goes on
2026-10-26 19:50:28 +01:00
maj00r
d6df785b78
feat(editor): the download area drawn on the topo map: a polygon is the boundary of what the editor downloads, the orthophoto and the terrain model alike. Drawn from the settings of the orthophoto (Download area, Draw on the map, the top view on): a click puts a point, a point dragged moves, Shift+click removes it, Backspace takes the last one back, Enter closes the area, Esc gives up; it's kept in the scenery as //$a lines in PUWG 1992, so it stays on the ground when the origin moves. Inside it everything the settings ask for, the standard imagery, the 4K one where it's ticked and covers the place, the squares of the terrain model where the scenery has its terrain, goes to the disk cache in the background, nothing decoded nor uploaded, only while no tile around the camera waits and not while the scenery is driven, with its progress, Pause and Retry under it; outside it nothing is asked for, around the camera, along the tracks or ahead of the laying, nor shown. The workers of the orthophoto are 8, at most 3 of them on the tiles around the camera, each holding an image decoded, the rest downloading the area. The 4K tiles: an image the tile no longer wants once it comes, as a 4K one asked for before the camera moved on, isn't uploaded (the 64 MB and the mipmaps of it), nor decoded where a newer job of the tile waits; no two jobs of one tile run at once; a standard tile coming blank twice is remembered by a .blank file, not downloaded again on each return; a 4K tile is uploaded only in a frame with no other upload. Selftests orthoarea, orthostats, orthohires, orthoareapause; unit tests of the tiles a triangle, a concave polygon, a thin band and a polygon about a corner touch (geometry::squares_in, square_touches)
2026-10-26 18:58:09 +01:00
5f93c7c20d
Catenary editor: save the catenary by the active layer
2026-10-26 18:56:28 +01:00
2321180051
Catenary editor: Iet-107 zigzag, span counter and step, cantilever swaps, movable anchors
2026-10-26 18:37:02 +01:00
550d47e97c
Merge remote-tracking branch 'jano211/siec-radio' into feat/renderers-cleanup
2026-10-26 16:36:36 +01:00
Claude
619f048f31
Sieć trakcyjna: kotwienia, kotwienie środkowe, parasole i wysięgniki rozstawione, konsole 4890/4690
...
Sam kod exe z gałęzi siec-trakcyjna od poprzedniego commita (bez testów, notatek i danych z tests/catenary).
Dane (data/traction_*.txt) leżą poza repozytorium.
- kotwienia ciężarowe i stałe (0404/0405, przewody zakotwione osobno, sieci bez własnych danych: network <symbol> as <kod>)
- kotwienie środkowe 0406/0408/0418/0416: lina, V i zaciski na linie nośnej liczonej jak przęsło, obejma 4160 na teownikach
- parasole i wysięgniki rozstawione na konsolach 4890, wysięgi pomocnicze 0167 na belkach 4690, trzeci wysięgnik w osi słupa,
lina nośna z innego wysięgnika (messenger_from)
- przęsła w nietypowych sytuacjach nie przechodzą na stary wygląd (bez Y, bez wieszaków, lina nad przewodem)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01GfTogWDsfCE8RGFGvm2eyp
2026-10-26 01:12:06 +01:00
maj00r
a0427bb80b
feat(editor): from the end of the diverging track of a switch the line laid always goes on with the curve of the switch: a straight or a bend the other way after P4 begins with the transition out of the curve of the switch, as after a plain track on a curve, never with a jump of the curvature, whether laid through points, traced, dragged in the straight layout or joined to another free end. The transition is the one for the speed the curve of the switch allows with no cant (about 48 km/h at R 300, so 20 to 30 m), not for the speed of the line. A straight with no bend clicked on from such an end runs on the way the transition leaves, as far as the point clicked, not along the tangent at the end, which left no room for the transition. Where no transition fits, as for a straight shorter than it, nothing is laid and the status says why
2026-10-25 17:26:26 +01:00
maj00r
f83a1a0cd2
feat(editor): the tracks onto the terrain from the terrain panel too: the terrain model (F5 Terrain) has a step 3, Tracks and terrain, with Tracks onto the terrain, the one to take first, big, what it does told under it (all the tracks go down or up onto the model, loaded along them by itself), then, after "Or:", Only the ones not fitted and Terrain under the tracks, each with a line of the case it's for; the same block stays in the panel of the tracks, under All the tracks of the scenery, with a line saying where the scenery is put on the map while it isn't. The progress of these is shown at step 3, the loading buttons of step 2 greyed meanwhile. The terrain lesson of the tutorial tells of step 3 so
2026-10-25 13:42:51 +01:00
maj00r
a312fd9935
feat(editor): with the gizmo hidden a track is changed by its ends only: its control vectors are neither drawn nor caught until Q, W, E or the buttons above the view bring the gizmo out, so a track selected won't bend by chance; the hints say what dragging an end does (a joint: the neighbours follow, a free end: a new track out of it, with Ctrl it moves). The tutorial has a lesson of its own for editing with the gizmo, after the one of selecting and fixing, which no longer speaks of it: the arrows, the rings, the handles, the control vectors, a point clicked, Ctrl and Esc, ticked off when the gizmo is out and a track bent or moved with it; thirteen lessons. Also puts back in place two lines of the band of the curvature which dd64b821 committed out of their place (the arc declared inside the loop, so that commit didn't compile)
2026-10-25 12:33:19 +01:00
maj00r
97b6a84d1b
fix(editor): a curve laid from a free end on a curve, or to one, goes on from its curvature: traced (Tab) from the end of the diverging track of a switch it begins right at P4 at the radius of the switch, not on a straight nor with a transition from a curvature of 0. The design of the line takes the curve of the adjoining track at each end (start_curved/end_curved with the radius, the side and the cant, kept with it in the scenery): the curve of the first vertex turning its way, or of the last one, begins right at the end, its transition going from that curvature and cant to those of its first arc, as between the arcs of a compound curve, none where it goes on at its radius; the radius of its arcs is the one which begins it there, solved for the tangent, the curves next to it making room on the straight. A curve traced next to such an end is fitted by its transitions alone, with none between the curves where the points keep to that as well, or laid from a straight there where it doesn't go on from it or that keeps to the points much closer: eased out of the curve of a plain track by the transition of the norms, the line beginning at its end, or right from P4, as a switch goes on with a straight. A bend of straights turning the way of the curve gets its curve going on from it with the transitions and the cant of the norms; the other way, or a straight, as before: eased out of the curve of a plain track, the jump of the curvature kept at a switch, as at its start, and not warned of. The cant of the adjoining track goes on into the curve with no ramp at that end; the norms ask for the transition between the curves only where the curvature differs by more than 5 % or the cant by 5 mm. The readout by the cursor, the status after laying and the plan tell the curve going on from the track, the plan with a box to go on or not. Dragged back to P4 from a point the curve goes on from its radius too. Selftests laywalk, laybends, curvejoint, endcurves; unit tests of a curve going on from a switch and into a free end, its cant, traced, through a transition into a larger radius, and of a bend of straights after such an end
2026-10-25 12:28:55 +01:00
maj00r
91900a0ead
fix(editor): the band of the curvature edits each arc of a compound curve: its arcs, elements of an even curvature, were taken for nothing to drag, and any change went to the first radius; now the plateau of an arc changes its own radius, a ramp between two arcs the transition between them, the ends of a plateau the transitions either side of it, by a drag or the wheel, the tooltip and the value shown while dragging naming the arc. The tutorial shows the correcting of a compound curve in a clip recorded in the editor in place of the drawing: the plan of the curve opened, the plateau of R2 dragged from 138 to 174 m, the line applied to the scenery
2026-10-25 12:01:12 +01:00
maj00r
cb766dabb4
feat(editor): the top view labels each curve once and each row of straights in line once, not each of their paths: a curve, from its first transition to its last, with the radius of its arc, of each arc of a compound one, its transitions and its cant (each arc's where they differ), as the plan reads it and as the laying shows it, in the middle of it; a straight row with its whole length. A piece of a transition curve no longer shows the radius of the arc as its own. The tutorial clips recorded again with them, in the top view: laying, the curves with a compound one traced (R 300/150) after the bend too sharp for the speed, a track selected with no gizmo, its control vector dragged and taken back, and the switches: one put into a track, a crossover between two tracks and a switch ladder laying its fan; the lessons of the curves and of the switches tell of the compound curve, the crossovers and the ladder
2026-10-25 11:35:25 +01:00
maj00r
bbb3e9e61e
feat(editor): laying and editing the track as a beginner meets them: the points clicked and not laid yet named at the top of the panel with Lay (Enter) and Drop the points, Enter shown by the bar at the bottom while there are some, and a first Esc over them only warning, the second one dropping them; the readout by the cursor kept in the 3d view, on the other side of the cursor where the view ends, with only the first warning of a curve and how many more the panel lists; the grid, the labels and the lines drawn over the view no longer seen through the docks; the gizmo in the tracks hidden until Q, W or E or its buttons above the view bring it out, an arrow there hiding it again, so a selected track isn't moved by chance; the radius of the curves at the bends headed so in the panel, the laid line told in metres and pieces, the hints of the select tool and of a straight shifted around an obstacle translated. An empty scenery opens facing north, the top view with the north up as the compass and the orthophoto have it (on LK2 Warszawa Wschodnia left, Rembertow right). The tutorial tells the laying as it works now: the bends clicked and Enter, the curves made at them and orange where too sharp for the speed, Tab for a curve traced, the radius by Ctrl+wheel when joining, the gizmo by Q W E, the terrain model loaded and fitted from the panel of the tracks, signals by I; its texts wrap to a dock it's put in, new clips of laying and of the curves, recorded with the selftest badge drawing the mouse or the key in use; the empty scenery and the shortcuts say the same
2026-10-25 11:02:45 +01:00
maj00r
e43863932d
feat(editor,track): a cant ramp of its own, off the transition curve: each end of a curve may have its ramp moved and of a length of its own (ST-T1-A6 9.6 pkt 5 and 11), on the straight before the curve or on the arc, the transition keeping the full cant all along, as a switch laid on it wants it; set in the plan under "Cant ramps", stored with the vertex as "ramps", reversed with the curve, marked across the track in the view. The cant of a line is a profile along it now, the paths cut where a ramp of its own starts and ends, their rolls following it, warnings where a ramp is shorter than its cant asks for or reaches into the curve before, past the line or over the other ramp. A switch on a cant ramp is drawn following it: its rails, blades, frogs and bed made at the mean of its rolls, as before, are turned along each path to the roll of the path there, so it no longer steps at its ends against the tracks either side. The checks of a switch laid into a curve warn of the values of table 11.9 in brackets as of the others, with no word of a consent. Unit test of a ramp moved onto the straight
2026-10-25 00:54:50 +02:00
maj00r
ece61056ff
feat(editor): a switch laid into a curve is checked by ST-T1-A6 as it's placed: the radii of its main and diverging tracks at its start and its end shown at it; warnings where the curvature of a track turns from one side to the other within it (KZW II, 9.7 pkt 12), where the diverging track is sharper or the main track bent more than table 11.9 allows the basic switch (the values allowed by way of exception named), where a switch of 1:9.403 or steeper is bent (11.4 pkt 4), where the cant changes within it (11.4 pkt 7), where a cant ramp starts or ends within it or under 6 m off it (9.6 pkt 16-17) and where the cant is over 100 mm (table 9.6); a note on a transition curve, which only an exception allows. The ends of the cant ramps are marked on the curve, and the start of the switch pressed within 3 m of where it starts or ends at an end of a ramp, or keeps the 6 m off it, is drawn there. The warnings stay in the status once it's laid. The checks stand on their own in editor/editorSwitchCurve, with unit tests
2026-10-25 00:29:05 +02:00
maj00r
aeef2cebb3
feat(editor): the plan shows which curve is edited: each named W1, W2... as its vertex is in the view, with its km and "Show in the view", which flies the camera over it; the part of it whose field the mouse is over or which is being edited (the whole curve, an arc of a compound one, the transition in, out or between two arcs) lit up in the view and named there with its radius, cant or length. The points clicked when a line is laid are kept with its design in the scenery ("click" lines, moved with it): the plan shows them in the colours of their departure and, while "Keep to the points clicked" is on, fits the radii of a curve whose transitions or cants are changed again to them, its transitions and cants as set; "Transitions for these cants" makes the transitions as long as the norms ask for at the radii and the cants set, an arc of a compound curve with no cant lengthening the ones either side of it. Unit test: 50 m between the arcs become 85 m, the curve 4 cm off the points clicked instead of 58
2026-10-25 00:11:58 +02:00
maj00r
2a399a92a5
feat(editor): each arc of a compound curve has a cant of its own, set in the Plan by each radius ("Cant of R1 (mm)"...), ramped along the transition curves between the arcs; until it's set, the cant of the curve in proportion to the curvature of the arc, as before, "auto" taking it back to that and "Apply recommended for V" all of them. The transitions between the arcs of the norms follow the cants set; warnings where the cant of an arc exceeds the norms, where the unbalanced acceleration does on any arc, and where a transition curve, at the ends or between the arcs, is shorter than the change of the curvature and of the cant along it needs. The labels of the curves show the cants of the arcs where they differ. Stored with the vertex as "cants", reversed with the curve; a unit test
2026-10-24 23:41:26 +02:00
maj00r
133ba9cb45
fix(editor): the heights from point to point broke the grade only at the bends of straights which stay bends, a curve traced or bends clicked close along a curve going at one grade from one of its ends to the other, attached there; and two tracks laid no longer meet at two heights where a point was clicked within 5 m of their joint, each end of a piece not cut there taking the height of its own stretch, not of the one the middle of the piece lies on (steps of 0.6 m on a steep grade in abc). Unit tests of the heights from point to point
2026-10-24 22:28:43 +02:00
maj00r
6bd3d4d19f
feat(editor): laying from the photo in two modes, Tab switching them in one row of points: the points clicked as bends of straights, eased with two transition curves meeting with no cant, of 3000 to 6000 m set in the panel, or with an arc of the norms where they don't fit; or the points along the middle of a curve seen on the photo, the last two on the straight after it, a curve, compound or two with a straight between them, fitted to them with its radii and its transitions. The points clicked are kept where they are, a curve below the norms laid with its warnings in the colour of one; the line shown as the points are clicked, laid by Enter in one step of the undo and going on from its end, Backspace taking the last point back, Esc dropping the points not laid. A bend after a free end or a curve traced goes along its straight, dashed; the curves labelled with their radii, transitions, cant and speed, the straights with their lengths, the points traced in the colour of how far the line is from them, the curves of the line listed in the panel. The Plan sets two transition curves with no arc for a vertex. Selftests laymode, layradius, laytrace, layp, layreport, layenter, layback, laycancel, laysample
2026-10-24 21:12:27 +02:00
maj00r
dcaf48d7b6
feat(editor): the editor knows which tracks have their grade line fitted: a grade line applied, fitted to the terrain model or with the profile, marks its tracks with the shape they have, kept in the scenery files as //$f lines; a track changed since, by hand, by K or taken back, isn't fitted any more. The terrain of the tracks in the panel of the tracks tells how many of the selected ones are fitted, and puts onto the terrain all the tracks or only the ones not fitted, these meeting the fitted ones as they are, the scenery not moved
...
Selftests: nmtauto [unfitted], fittedstate [reload].
2026-10-24 19:14:08 +02:00
maj00r
59c3458173
feat(editor): the terrain model in the field of work of the terrain only loads and keeps the model: its place, Load along the tracks or around the camera, the band, the offset of the heights, the progress and the faults, with no choice of what gives way; the tracks and the terrain are fitted to each other in the panel of the tracks. In a scenery with its terrain made from the model the terrain grows around the camera too, not only ahead of the laying; the chunks the growing gave up are not asked for again
...
The terrain follows the edits of the tracks with a formation only: a track with none is not shaped on its own any more, nor after the chunks made around it, and the formations are laid after a load only when the tracks are put onto the terrain or the terrain under them.
2026-10-24 19:02:29 +02:00
maj00r
7d0caee541
feat(editor): the terrain of the tracks in the panel of the tracks: Draw the terrain to the track, of the selected tracks or of their whole run, Restore the terrain, each one step of the history, the terrain following the tracks edited or not, and Tracks onto the terrain and Terrain under the tracks for all the tracks of the scenery
...
The formation of a track as it is already was taken out of the terrain when the track was shaped again, as after a change of its properties alone: the formations the tracks still have are no longer counted as gone. Selftest trackterrain pull|restore <tracks>.
2026-10-24 18:53:32 +02:00
maj00r
11d1342181
feat(editor): an end of a track dragged, and an end of a straight dragged by its handle, goes onto the ground at the height of the ballast, as a point laid; with Shift held it keeps its height
...
Selftest trackends: the ends of a track against the ground under them.
2026-10-24 18:45:47 +02:00
maj00r
9625b4b3d9
feat(editor): K on a track is a break of the grade, as a point of a road: the track split at the cursor, the point between the two at the height of the ground and the ballast there, each of them an even grade from its other end up to it
...
Selftest kbreak: K on the track nearest a point, logs the joint against the ground.
2026-10-24 18:41:25 +02:00
maj00r
641619e13f
feat(editor): the point of a track laid where there's no terrain yet, as over the base map of the top view, takes the height of the terrain model with the offset of the scenery and the ballast, the model under the cursor asked for while laying; the fitted heights of the laying called a smoothed grade line in Polish
2026-10-24 18:37:44 +02:00
maj00r
2ae10f5901
feat(editor): the chunks waiting for the terrain model and the tiles of the orthophoto asked for and not shown yet outlined on the ground where they will be, pulsing, blue and orange, named where the name fits: at the heights of the terrain beside them or of the model, else level with the nearest chunk or track
2026-10-24 18:31:24 +02:00
maj00r
336c940c28
fix(editor): laying leaves the terrain as it is: the track takes from the ground only the heights of the points clicked, from point to point by default, and no formation is led into the terrain after it, nor after a track dragged from a free end; the terrain made from the model never makes a chunk there is anew, made from the model or by hand, edited or not, only the missing ones, the formations laid anew as the tracks lie
...
The terrain under the tracks and the end of Tracks onto the terrain took every chunk along the tracks away and made it again from the model, the changes made by hand with them (79 chunks on test2). The heights while laying are kept under a key of their own, so the fitted ones chosen when they were the default are left behind; fitted stays a choice.
2026-10-24 18:20:22 +02:00
maj00r
36904c2815
feat(editor): buttons in the switch tool setting a model of timbers on all the switches and crossings of the scenery at once, one for each model of timbers of the scenery data and one for the model of eu07.ini, in one step of the undo; the selftest switchtimbers does the same
...
(cherry picked from commit 81a6b855d0
2026-10-24 16:33:41 +02:00
a83d5c6978
feat(editor): presets of the track properties, applied on the selected tracks
...
(cherry picked from commit 83c8c23c80
2026-10-24 16:33:24 +02:00
7e284b293d
feat(editor): texture of the rails of path 2 of a switch set apart
...
(cherry picked from commit 16c77ab6fb
2026-10-24 16:32:35 +02:00
Claude
f30fefd91c
Sieć trakcyjna: przęsła wg typów sieci, wysięgniki z katalogu, bramki, kotwienia i edytor sieci
...
Sam kod exe z gałęzi siec-trakcyjna (bez testów, notatek i danych z tests/catenary).
Dane (data/traction_*.txt) leżą poza repozytorium.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_019Tqn7T8D1Gx3ptKtZgNtX5
2026-10-23 23:15:00 +02:00
maj00r
4d2f95aa43
feat(editor): the tracks laid on the terrain model go onto it as the tracks going onto the terrain do, the chain laid since the laying began fitted again at each click, with the tracks around kept and met; a straight or an arc cut by the fit before made one again, a path cut only where it would part from the line by more than 3 cm; a choice of the heights while laying: fitted, from point to point, level, kept in the settings; the fit taken back with its click
2026-10-23 15:55:58 +02:00
maj00r
5e846018b6
feat(editor): far out the top view shows the base map of OpenStreetMap from geoportal.gov.pl in place of the imagery, tiles as large as the view needs, the ground not drawn under it nor streamed as far as the view; the tracks over it in the colour of the rails, blue by default, and the joints of the pieces left out far out
2026-10-23 13:35:07 +02:00
maj00r
a892532fda
feat(editor): the top view draws the tracks whole, without the ballast or the rails alone, in a colour of their own over the imagery and the map: both rails close up, one line further out; a choice by the extent and in the View menu, kept in the settings
2026-10-23 13:20:06 +02:00
maj00r
fe3dd758ea
feat(editor): the signalling, the hectometre posts and the terrain go to layers of their own: <scenery>_srk.scm, _hektometry.scm, _teren.scm, made by the first of them and included by the scenario file, the active layer left as it is; the station descriptions of the signalling there too
2026-10-23 13:07:14 +02:00
maj00r
eab3dca700
feat(editor): the Signals tool goes into the signalling one: its templates under Signals in the SRK panel, the ones the station's signals are placed with too; a click on a tile or Place by a track arms placing, Esc or a click on the armed tile stops it, a click on a track else opening its station; a signal picked in 3D or in Signal heads shows its card at the top of the panel, its template, to the other side, turn around; H no longer a tool
2026-10-23 12:26:07 +02:00
maj00r
2d9be3ae10
feat(editor): a deleted track leaves its signal reads and its track circuit to the track laid in its place, and the SRK check lists the signals no track reads and the broken lines, with a Repair
...
A deleted track whose read events or track circuit no other track took says so by the cursor, naming the signals and the circuits, and the editor keeps them for the track laid in its place, within a metre of its axis. The read of each signal goes to the piece by the signal, on the list its facing there gives, so a track laid the other way round keeps the trains reading it; the other events go to the piece at its middle, the circuit to a track lying there for the most part, a new track taking it instead of the one of the track it was made from. It happens in the step which lays the track, so Ctrl+Z takes it back and laying it again gets them again; a track which took a circuit over and is removed by another step leaves it to that step, and the events of a signal taken away stay off the tracks.
The SRK panel of a station lists what it and its lines need: signals no track reads, lines broken off where the tracks go on beyond a gap, tracks of a line of the automatic block in no block section, block sections whose tracks are gone. A row shows the place; Repair has the track by each signal read it again, as moving it does, and sets the line signals again where tracks are in no block section. A warning after an operation shows by the cursor in amber, a refusal in red as before. srkcheck counts these too, srkfix repairs, join takes the height of the ends for sceneries far above zero.
2026-10-22 22:40:01 +02:00
maj00r
c024d7c262
feat(editor): the signals and the signs by a track go with it as the Plan lays it anew, square to the line, not along it
...
A curve laid anew, its radius changed or made compound, or a straight moved: the paths of the chain are cut again where their joints stood, set square onto the new line, each keeping its stretch of the ground, so their events, their track circuits and the cuts of the block sections stay where they were instead of being handed on along the line; the parts between the switches alike, the old even sharing kept where the joints don't follow one another along the new line.
The objects by a track taken for a change go with it by themselves: the signals and the warning discs it or its run reads, the SHP resonators by their events, and the controls of the block sections, the hectometre posts, the W17 markers and the other signs by the track nearest to them, within 12 m. They move square to the new axis keeping their offset and their turn, an object moved by hand meanwhile staying where it was put. Such a binding isn't kept in the scenery nor shown among the bound objects of the infra tool, which can still bind the object for good, and the undo and the redo take the objects back and forth with the tracks. The status of the Plan tells how many objects moved with the tracks. A path taking an object over the other way round keeps it on its side, turned as it was.
2026-10-22 21:32:34 +02:00
maj00r
4c55951d8a
feat(editor): the automatic block both ways or mixed, and the lines out on the schematic
...
A block boundary of a line both ways has, on each track, the block signal of its trains 15 m before the joint and the one of the wrong-track trains 15 m beyond it, named after its twin with N, both on the outside of the line, the templates leaning the other way picked for the N ones, as on the lines of PKP PLK. The mixed block keeps the automatic block for the trains of the track and the semi-automatic one for the wrong-track ones: no N signals, a warning disc the braking distance before the entry signal of the wrong-track trains. A choice under the table of the lines sets either for the double-track lines of the station, kept in the record of the station, and by itself a line takes the mixed block where a warning disc stands for its wrong-track trains and no N signal does. Set the line signals places the N signals or the warning disc and takes the other away, a block boundary drawn places the N signals of a line both ways, and sbl_odstep.inc switches both block signals of a section with its 7th parameter. The name shown at the mouse while drawing takes the letter the block signal will get where its number stands already.
The station schematic shows the lines out to the next stations straightened: their block sections in the colours of their names with their lengths, the joints, the block signals and the warning discs with their km on the outside of the line, the axis in km; Lines fits them in, a section under the mouse tells its name, length and km, and a click on it flies there in the 3d view.
2026-10-22 20:47:52 +02:00
