f20b1a3071
Replace cubemap scenery reflections with SSR, add Vulkan ray traced reflections
2026-10-25 13:54:49 +01:00
maj00r
f83a1a0cd2
feat(editor): the tracks onto the terrain from the terrain panel too: the terrain model (F5 Terrain) has a step 3, Tracks and terrain, with Tracks onto the terrain, the one to take first, big, what it does told under it (all the tracks go down or up onto the model, loaded along them by itself), then, after "Or:", Only the ones not fitted and Terrain under the tracks, each with a line of the case it's for; the same block stays in the panel of the tracks, under All the tracks of the scenery, with a line saying where the scenery is put on the map while it isn't. The progress of these is shown at step 3, the loading buttons of step 2 greyed meanwhile. The terrain lesson of the tutorial tells of step 3 so
2026-10-25 13:42:51 +01:00
maj00r
79a8c13586
fix(editor): a track bent by its second control vector is drawn bent: the straightening of a straight with control vectors (world/Track.cpp) checked the first vector twice, so with it left along the straight the second one, dragged with the gizmo, changed the data but not the track drawn; now a straight only where both vectors lie along it or aren't given. A track bent by hand into an S between two points dragged is labelled with its length (L 77 m), not with a radius of many kilometres read off it; the "K: split here" by the cursor isn't shown while a point is dragged; Ctrl+Z takes away the warning by the cursor of what it took back (the paths that left the kept design). The tutorial clips of editing recorded again: selecting and fixing without the gizmo (a joint dragged, the warning read, Ctrl+Z), and the new one of editing with the gizmo (Q, a control vector dragged bending the track, W, E)
2026-10-25 12:57:23 +01:00
maj00r
a312fd9935
feat(editor): with the gizmo hidden a track is changed by its ends only: its control vectors are neither drawn nor caught until Q, W, E or the buttons above the view bring the gizmo out, so a track selected won't bend by chance; the hints say what dragging an end does (a joint: the neighbours follow, a free end: a new track out of it, with Ctrl it moves). The tutorial has a lesson of its own for editing with the gizmo, after the one of selecting and fixing, which no longer speaks of it: the arrows, the rings, the handles, the control vectors, a point clicked, Ctrl and Esc, ticked off when the gizmo is out and a track bent or moved with it; thirteen lessons. Also puts back in place two lines of the band of the curvature which dd64b821 committed out of their place (the arc declared inside the loop, so that commit didn't compile)
2026-10-25 12:33:19 +01:00
maj00r
97b6a84d1b
fix(editor): a curve laid from a free end on a curve, or to one, goes on from its curvature: traced (Tab) from the end of the diverging track of a switch it begins right at P4 at the radius of the switch, not on a straight nor with a transition from a curvature of 0. The design of the line takes the curve of the adjoining track at each end (start_curved/end_curved with the radius, the side and the cant, kept with it in the scenery): the curve of the first vertex turning its way, or of the last one, begins right at the end, its transition going from that curvature and cant to those of its first arc, as between the arcs of a compound curve, none where it goes on at its radius; the radius of its arcs is the one which begins it there, solved for the tangent, the curves next to it making room on the straight. A curve traced next to such an end is fitted by its transitions alone, with none between the curves where the points keep to that as well, or laid from a straight there where it doesn't go on from it or that keeps to the points much closer: eased out of the curve of a plain track by the transition of the norms, the line beginning at its end, or right from P4, as a switch goes on with a straight. A bend of straights turning the way of the curve gets its curve going on from it with the transitions and the cant of the norms; the other way, or a straight, as before: eased out of the curve of a plain track, the jump of the curvature kept at a switch, as at its start, and not warned of. The cant of the adjoining track goes on into the curve with no ramp at that end; the norms ask for the transition between the curves only where the curvature differs by more than 5 % or the cant by 5 mm. The readout by the cursor, the status after laying and the plan tell the curve going on from the track, the plan with a box to go on or not. Dragged back to P4 from a point the curve goes on from its radius too. Selftests laywalk, laybends, curvejoint, endcurves; unit tests of a curve going on from a switch and into a free end, its cant, traced, through a transition into a larger radius, and of a bend of straights after such an end
2026-10-25 12:28:55 +01:00
maj00r
91900a0ead
fix(editor): the band of the curvature edits each arc of a compound curve: its arcs, elements of an even curvature, were taken for nothing to drag, and any change went to the first radius; now the plateau of an arc changes its own radius, a ramp between two arcs the transition between them, the ends of a plateau the transitions either side of it, by a drag or the wheel, the tooltip and the value shown while dragging naming the arc. The tutorial shows the correcting of a compound curve in a clip recorded in the editor in place of the drawing: the plan of the curve opened, the plateau of R2 dragged from 138 to 174 m, the line applied to the scenery
2026-10-25 12:01:12 +01:00
maj00r
cb766dabb4
feat(editor): the top view labels each curve once and each row of straights in line once, not each of their paths: a curve, from its first transition to its last, with the radius of its arc, of each arc of a compound one, its transitions and its cant (each arc's where they differ), as the plan reads it and as the laying shows it, in the middle of it; a straight row with its whole length. A piece of a transition curve no longer shows the radius of the arc as its own. The tutorial clips recorded again with them, in the top view: laying, the curves with a compound one traced (R 300/150) after the bend too sharp for the speed, a track selected with no gizmo, its control vector dragged and taken back, and the switches: one put into a track, a crossover between two tracks and a switch ladder laying its fan; the lessons of the curves and of the switches tell of the compound curve, the crossovers and the ladder
2026-10-25 11:35:25 +01:00
maj00r
29b9b93353
fix(editor): the plan warns of the curved track adjoining a curve only where the curvature jumps there: a curve going on from the diverging track of a switch at its radius (R 300 after R 301 in wsd) no longer has it. The side the adjoining track turns to is taken with its radius into the chain and the design, and the curvature the design meets it with, signed by its turn, compared with it, within 5%; a design kept without the side is taken for turning its way. Unit test: R 300 from the very start after R 301 turning the same way gives no warning, turning the other way or starting with a straight does
2026-10-25 11:14:49 +01:00
maj00r
bbb3e9e61e
feat(editor): laying and editing the track as a beginner meets them: the points clicked and not laid yet named at the top of the panel with Lay (Enter) and Drop the points, Enter shown by the bar at the bottom while there are some, and a first Esc over them only warning, the second one dropping them; the readout by the cursor kept in the 3d view, on the other side of the cursor where the view ends, with only the first warning of a curve and how many more the panel lists; the grid, the labels and the lines drawn over the view no longer seen through the docks; the gizmo in the tracks hidden until Q, W or E or its buttons above the view bring it out, an arrow there hiding it again, so a selected track isn't moved by chance; the radius of the curves at the bends headed so in the panel, the laid line told in metres and pieces, the hints of the select tool and of a straight shifted around an obstacle translated. An empty scenery opens facing north, the top view with the north up as the compass and the orthophoto have it (on LK2 Warszawa Wschodnia left, Rembertow right). The tutorial tells the laying as it works now: the bends clicked and Enter, the curves made at them and orange where too sharp for the speed, Tab for a curve traced, the radius by Ctrl+wheel when joining, the gizmo by Q W E, the terrain model loaded and fitted from the panel of the tracks, signals by I; its texts wrap to a dock it's put in, new clips of laying and of the curves, recorded with the selftest badge drawing the mouse or the key in use; the empty scenery and the shortcuts say the same
2026-10-25 11:02:45 +01:00
maj00r
e43863932d
feat(editor,track): a cant ramp of its own, off the transition curve: each end of a curve may have its ramp moved and of a length of its own (ST-T1-A6 9.6 pkt 5 and 11), on the straight before the curve or on the arc, the transition keeping the full cant all along, as a switch laid on it wants it; set in the plan under "Cant ramps", stored with the vertex as "ramps", reversed with the curve, marked across the track in the view. The cant of a line is a profile along it now, the paths cut where a ramp of its own starts and ends, their rolls following it, warnings where a ramp is shorter than its cant asks for or reaches into the curve before, past the line or over the other ramp. A switch on a cant ramp is drawn following it: its rails, blades, frogs and bed made at the mean of its rolls, as before, are turned along each path to the roll of the path there, so it no longer steps at its ends against the tracks either side. The checks of a switch laid into a curve warn of the values of table 11.9 in brackets as of the others, with no word of a consent. Unit test of a ramp moved onto the straight
2026-10-25 00:54:50 +02:00
maj00r
ece61056ff
feat(editor): a switch laid into a curve is checked by ST-T1-A6 as it's placed: the radii of its main and diverging tracks at its start and its end shown at it; warnings where the curvature of a track turns from one side to the other within it (KZW II, 9.7 pkt 12), where the diverging track is sharper or the main track bent more than table 11.9 allows the basic switch (the values allowed by way of exception named), where a switch of 1:9.403 or steeper is bent (11.4 pkt 4), where the cant changes within it (11.4 pkt 7), where a cant ramp starts or ends within it or under 6 m off it (9.6 pkt 16-17) and where the cant is over 100 mm (table 9.6); a note on a transition curve, which only an exception allows. The ends of the cant ramps are marked on the curve, and the start of the switch pressed within 3 m of where it starts or ends at an end of a ramp, or keeps the 6 m off it, is drawn there. The warnings stay in the status once it's laid. The checks stand on their own in editor/editorSwitchCurve, with unit tests
2026-10-25 00:29:05 +02:00
maj00r
aeef2cebb3
feat(editor): the plan shows which curve is edited: each named W1, W2... as its vertex is in the view, with its km and "Show in the view", which flies the camera over it; the part of it whose field the mouse is over or which is being edited (the whole curve, an arc of a compound one, the transition in, out or between two arcs) lit up in the view and named there with its radius, cant or length. The points clicked when a line is laid are kept with its design in the scenery ("click" lines, moved with it): the plan shows them in the colours of their departure and, while "Keep to the points clicked" is on, fits the radii of a curve whose transitions or cants are changed again to them, its transitions and cants as set; "Transitions for these cants" makes the transitions as long as the norms ask for at the radii and the cants set, an arc of a compound curve with no cant lengthening the ones either side of it. Unit test: 50 m between the arcs become 85 m, the curve 4 cm off the points clicked instead of 58
2026-10-25 00:11:58 +02:00
maj00r
2a399a92a5
feat(editor): each arc of a compound curve has a cant of its own, set in the Plan by each radius ("Cant of R1 (mm)"...), ramped along the transition curves between the arcs; until it's set, the cant of the curve in proportion to the curvature of the arc, as before, "auto" taking it back to that and "Apply recommended for V" all of them. The transitions between the arcs of the norms follow the cants set; warnings where the cant of an arc exceeds the norms, where the unbalanced acceleration does on any arc, and where a transition curve, at the ends or between the arcs, is shorter than the change of the curvature and of the cant along it needs. The labels of the curves show the cants of the arcs where they differ. Stored with the vertex as "cants", reversed with the curve; a unit test
2026-10-24 23:41:26 +02:00
maj00r
00f066ac33
fix(editor): a track laid keeps in the scenery the design it was laid by, as it is, not its curves read from the paths again: read again a compound curve with transitions between its arcs came out another one, the plan showing it so. A track dragged from a free end, or laid on from one by the buttons, is no longer read either, nor the run of the tracks it joins with it, which put a design read so in the place of the one laid; the plan reads such curves when it's opened
2026-10-24 23:15:36 +02:00
maj00r
133ba9cb45
fix(editor): the heights from point to point broke the grade only at the bends of straights which stay bends, a curve traced or bends clicked close along a curve going at one grade from one of its ends to the other, attached there; and two tracks laid no longer meet at two heights where a point was clicked within 5 m of their joint, each end of a piece not cut there taking the height of its own stretch, not of the one the middle of the piece lies on (steps of 0.6 m on a steep grade in abc). Unit tests of the heights from point to point
2026-10-24 22:28:43 +02:00
maj00r
4602f727bb
feat(editor): bends clicked close along a curve make one compound curve, not curves with short straights between them: a row of bends turning the same way, the straights between their curves shorter than as many metres as km/h of the speed (30 m at least), is taken for points of a curve seen on the photo, one curve fitted through them between the straights before and after it, with as many radii meeting with no transitions between them as keep it within 0.3 m of the points, up to eight, and taken where it keeps within 1 m; a row which doesn't is cut in parts, two bends alone joined into one curve along the line their curves laid. A curve traced is two curves turning the same way only with a straight between them as long as that and keeping much closer to the points than one compound curve; a fit running off to the largest radius gives two transition curves meeting. The transitions fitted turn no more than the curve; arcs and spirals are found many times quicker, the curve of a compound fit made straight away, a transition integrated in 64 steps at most. The fits wait on the thread of the laying in a queue of their own, the one asked for last fitted first
2026-10-24 22:09:27 +02:00
maj00r
b74a200bdf
test(editor): EU07_EDITOR_SELFTEST_HIDDEN runs a selftest in a window never shown nor focused, full screen or not, for the computer in use meanwhile
2026-10-24 21:12:28 +02:00
maj00r
6bd3d4d19f
feat(editor): laying from the photo in two modes, Tab switching them in one row of points: the points clicked as bends of straights, eased with two transition curves meeting with no cant, of 3000 to 6000 m set in the panel, or with an arc of the norms where they don't fit; or the points along the middle of a curve seen on the photo, the last two on the straight after it, a curve, compound or two with a straight between them, fitted to them with its radii and its transitions. The points clicked are kept where they are, a curve below the norms laid with its warnings in the colour of one; the line shown as the points are clicked, laid by Enter in one step of the undo and going on from its end, Backspace taking the last point back, Esc dropping the points not laid. A bend after a free end or a curve traced goes along its straight, dashed; the curves labelled with their radii, transitions, cant and speed, the straights with their lengths, the points traced in the colour of how far the line is from them, the curves of the line listed in the panel. The Plan sets two transition curves with no arc for a vertex. Selftests laymode, layradius, laytrace, layp, layreport, layenter, layback, laycancel, laysample
2026-10-24 21:12:27 +02:00
maj00r
9855de74b4
feat(editor): the tracks are laid to the PKP PLK norms only: the choice of the free laying is gone, its cards in the panels of the laying and of the plan, the question as the laying starts and the setting; the transition curves and the cant of the norms always, the speed of the laying with its chips, the radius below the minimum for the speed a warning. The settings keep the radii the bends of the straights will be eased with instead
2026-10-24 20:05:04 +02:00
maj00r
5ae9932ce7
fix(editor): the tracks being built drawn over a dark edge, the points clicked while laying and the line between them too: the white straights of the track laid no longer melt into the light base map of the top view zoomed out
2026-10-24 19:25:30 +02:00
maj00r
69980b5540
perf(editor): the top view draws the terrain lighter: the cells of its grid some 16 pixels across, not 10, the chunks streamed only as far as the screen reaches, not the range of the 3D view, and the cube map of the reflections not made anew while it's shown, nothing in it reflecting
...
On test2 at an extent of 300 m: 55 chunks in place of 106, 204 thousand triangles of the terrain in place of 895 thousand (all drawn 0.82 million in place of 2.34), the GPU 1.46 ms a frame in place of 2.33, and 3.6 ms of the CPU less a frame for the reflections. The 3D view stays as it was; the range of 50 km of the tracks work area in 3D cost nothing measurable on l053. Selftest perf logs the chunks of the terrain, their triangles and the steps of their grids.
2026-10-24 19:23:01 +02:00
maj00r
dcaf48d7b6
feat(editor): the editor knows which tracks have their grade line fitted: a grade line applied, fitted to the terrain model or with the profile, marks its tracks with the shape they have, kept in the scenery files as //$f lines; a track changed since, by hand, by K or taken back, isn't fitted any more. The terrain of the tracks in the panel of the tracks tells how many of the selected ones are fitted, and puts onto the terrain all the tracks or only the ones not fitted, these meeting the fitted ones as they are, the scenery not moved
...
Selftests: nmtauto [unfitted], fittedstate [reload].
2026-10-24 19:14:08 +02:00
maj00r
59c3458173
feat(editor): the terrain model in the field of work of the terrain only loads and keeps the model: its place, Load along the tracks or around the camera, the band, the offset of the heights, the progress and the faults, with no choice of what gives way; the tracks and the terrain are fitted to each other in the panel of the tracks. In a scenery with its terrain made from the model the terrain grows around the camera too, not only ahead of the laying; the chunks the growing gave up are not asked for again
...
The terrain follows the edits of the tracks with a formation only: a track with none is not shaped on its own any more, nor after the chunks made around it, and the formations are laid after a load only when the tracks are put onto the terrain or the terrain under them.
2026-10-24 19:02:29 +02:00
maj00r
7d0caee541
feat(editor): the terrain of the tracks in the panel of the tracks: Draw the terrain to the track, of the selected tracks or of their whole run, Restore the terrain, each one step of the history, the terrain following the tracks edited or not, and Tracks onto the terrain and Terrain under the tracks for all the tracks of the scenery
...
The formation of a track as it is already was taken out of the terrain when the track was shaped again, as after a change of its properties alone: the formations the tracks still have are no longer counted as gone. Selftest trackterrain pull|restore <tracks>.
2026-10-24 18:53:32 +02:00
maj00r
11d1342181
feat(editor): an end of a track dragged, and an end of a straight dragged by its handle, goes onto the ground at the height of the ballast, as a point laid; with Shift held it keeps its height
...
Selftest trackends: the ends of a track against the ground under them.
2026-10-24 18:45:47 +02:00
maj00r
9625b4b3d9
feat(editor): K on a track is a break of the grade, as a point of a road: the track split at the cursor, the point between the two at the height of the ground and the ballast there, each of them an even grade from its other end up to it
...
Selftest kbreak: K on the track nearest a point, logs the joint against the ground.
2026-10-24 18:41:25 +02:00
maj00r
641619e13f
feat(editor): the point of a track laid where there's no terrain yet, as over the base map of the top view, takes the height of the terrain model with the offset of the scenery and the ballast, the model under the cursor asked for while laying; the fitted heights of the laying called a smoothed grade line in Polish
2026-10-24 18:37:44 +02:00
maj00r
2ae10f5901
feat(editor): the chunks waiting for the terrain model and the tiles of the orthophoto asked for and not shown yet outlined on the ground where they will be, pulsing, blue and orange, named where the name fits: at the heights of the terrain beside them or of the model, else level with the nearest chunk or track
2026-10-24 18:31:24 +02:00
maj00r
336c940c28
fix(editor): laying leaves the terrain as it is: the track takes from the ground only the heights of the points clicked, from point to point by default, and no formation is led into the terrain after it, nor after a track dragged from a free end; the terrain made from the model never makes a chunk there is anew, made from the model or by hand, edited or not, only the missing ones, the formations laid anew as the tracks lie
...
The terrain under the tracks and the end of Tracks onto the terrain took every chunk along the tracks away and made it again from the model, the changes made by hand with them (79 chunks on test2). The heights while laying are kept under a key of their own, so the fitted ones chosen when they were the default are left behind; fitted stays a choice.
2026-10-24 18:20:22 +02:00
maj00r
da336b9530
fix(editor): the orthophoto which comes before the terrain under it lies where the terrain will be, at the heights of the terrain model with the offset of the scenery, or level with the tiles beside along its edges, not flat at the height of the layer far below; the squares of the model asked for, and the tile laid onto the terrain or the model once either comes
...
mapstate logs how many tiles lie on the ground and how many at guessed heights.
2026-10-24 18:13:15 +02:00
maj00r
e322947300
fix(editor): the track shown while it's laid over the ground no longer holds up the frames: its grade line is fitted on a thread of its own, the line fitted a moment ago stretched over the track meanwhile, and the click takes the line fitted for the same ground instead of fitting it again; the terrain follows the tracks once the laying ends, not after each click of a chain
...
Fitting the grade line took 3 ms for 250 m of track, 30 ms for 1 km, 65 ms for 2 km and 200 ms for 4 km, and the preview of the lay tool and of the drag from a free end fitted it every frame, twice for the drag; on the terrain model the preview of some 800 m took 10 to 17 ms a frame, the cursor standing or not. Now the frame waits under 1.5 ms for 4 km. The formations of the tracks led into the terrain went through every chunk under them 0.3 s after each click, some 50 ms, while the cursor went on to the next point; they wait for the laying to end. The tracks laid and the terrain are the same as before.
Selftests: perf logs the longest frame and those over 33 ms, fittime the time of the fit by length, terrainhash a hash of the chunks in memory.
2026-10-24 18:00:21 +02:00
maj00r
36904c2815
feat(editor): buttons in the switch tool setting a model of timbers on all the switches and crossings of the scenery at once, one for each model of timbers of the scenery data and one for the model of eu07.ini, in one step of the undo; the selftest switchtimbers does the same
...
(cherry picked from commit 81a6b855d0
2026-10-24 16:33:41 +02:00
a83d5c6978
feat(editor): presets of the track properties, applied on the selected tracks
...
(cherry picked from commit 83c8c23c80
2026-10-24 16:33:24 +02:00
7e284b293d
feat(editor): texture of the rails of path 2 of a switch set apart
...
(cherry picked from commit 16c77ab6fb
2026-10-24 16:32:35 +02:00
bd589f272d
feat(vulkan): vulkan 1.4 core with the user interface and the launcher, shaders split into ogl46/vk14 with SPIR-V binaries loaded first
2026-10-24 05:47:11 +02:00
68fa5dc2da
feat(vulkan): gfxrenderer picks the opengl 4.6 or the vulkan 1.4 renderer (B1-B3)
2026-10-24 03:06:33 +02:00
maj00r
8375891c41
feat(editor): the selftest fastentour, the camera over each cell of a grid with switches or crossings laying timbers in turn, for a fastencheck of the whole scenery after it
2026-10-24 02:19:06 +02:00
maj00r
540dae420f
fix(sleepers): the timbers a switch shares with a track with no model of timbers of its own laid of the model of the switch, not of the one of eu07.ini without the fastenings: the model of a track with none of its own that of the tracks most of its timbers carry with one, and a timber carrying none of them, as under the short tracks between the halves of a slip, of the model of the nearest timber with one up to 1.5 m away; the fastenings and checkseats selftests take the model the same way
2026-10-24 02:18:58 +02:00
maj00r
81a6b855d0
feat(editor): buttons in the switch tool setting a model of timbers on all the switches and crossings of the scenery at once, one for each model of timbers of the scenery data and one for the model of eu07.ini, in one step of the undo; the selftest switchtimbers does the same
2026-10-24 01:40:47 +02:00
maj00r
2e00619d7f
feat(sleepers): the crossings at wide angles laid on timbers: where two tracks cross so wide they're laid as a grid, the one track carries timbers square to it through the crossing, two side by side under each rail of the other, which lays none there; the rail running along the two held on their seam by fastenings as far apart as the beams at most, clear of the fastenings of the rails across; the guard rails of the crossings at wide and middle angles held as the rails beside are, a running rail with its guard rail in the fastening of both, the rails crowding at the corners under one plate; the beams under the guard rails timbers as far as the guard rails reach; the fastenings selftest lists the rails on each timber with detail rails
2026-10-23 23:37:28 +02:00
Claude
f30fefd91c
Sieć trakcyjna: przęsła wg typów sieci, wysięgniki z katalogu, bramki, kotwienia i edytor sieci
...
Sam kod exe z gałęzi siec-trakcyjna (bez testów, notatek i danych z tests/catenary).
Dane (data/traction_*.txt) leżą poza repozytorium.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_019Tqn7T8D1Gx3ptKtZgNtX5
2026-10-23 23:15:00 +02:00
336690ad8a
perf(debug): debug.memorystats switch for the heap counting (off by default) and the places of the large heap blocks in the memory section
2026-10-23 23:10:32 +02:00
maj00r
997a8da41d
fix(rails): the rail going on from the heel of a blade raised as the blade at the heel and forged down to the plain rail along 0.5 m, no step at the heel; the wing rails made over into the low section by a share of their own along them, the rise apart from it; a fastening holding raised rails, as the plate of a frog under the wing rails and the nose, moved up on a pad as far as the least raised of them, its clips with them, a rail not raised sunk in it, a rail raised more on a pad of its own on it; the fastenings selftest lists the lifts and the pads
2026-10-23 22:00:11 +02:00
2f96dfe767
perf(physics): air flowing along a pipe wakes the physics of a coupled vehicle only when it changes its pressure by more than physics.pipewake (0.001 bar), not with any trickle of it
2026-10-23 19:30:21 +02:00
f17462b186
perf(physics): road vehicles farther than 1 km from the camera go by one step of the physics in a frame (physics.roadlod); count what resets the switching time of the vehicles (compressor, mains, diesel, physics woken) in the debug panel
2026-10-23 18:47:01 +02:00
maj00r
fa62a61389
fix(sleepers): no rail left lying on a timber without a fastening: the stock rails on a plate as wide as their foot between the brace and the slide plate, the stock rails back to back, as the wing rails of the slips with the blades outside of the diamond, on one plate under both; three rails or more close beside one another under fastenings of two rails in turn; a plate lying over the fastening of the rail beside cut short at its edge, as on one plate with it, a rail with its check rail on the fastening of the rail beside in such a plate, not left out; selftests checkseats and the bare rails in fastencheck
2026-10-23 18:25:00 +02:00
a04efbf968
perf(physics): vehicles standing still and held by their brakes let their physics sleep (physics.sleepheld)
2026-10-23 18:20:49 +02:00
52df707f30
perf(debug): parts of the vehicle update in the debug panel: scenery animations, power grid, roads, preparation, forces, vehicle update and ai, with the counts of vehicles and physics steps; input and the start of the ui frame timed apart
2026-10-23 17:26:44 +02:00
maj00r
b512460fdf
feat(sleepers): the fastenings fitted on the switches crossing and the double ones: the chair of the model split into its brace and its slide plate, the slide plate from the edge of the foot of the stock rail on, not under it; the plates and the slide plates narrowed where the rails lie close, the fastening of two rails centred between them, a rail lying on the fastening of the rail beside it left without one of its own, the brace dropped where the rail beside comes too close; selftest fastencheck
2026-10-23 17:25:02 +02:00
maj00r
5aedbcdc1b
feat(sleepers): the timbers of a switch get the fastenings of the rails from the submodels plate, chair and check of their model: a plate under each rail where it lies on a timber, slide chairs under the stock rails along the blades, a fastening of both where a check rail or another rail of the frog lies close beside, the legs of the nose in one plate where they're joined; the rails sit on the plate, the blades ride on the slide plates of the chairs as high as the model has them, their webs shortened; the fastenings drawn within 120 m; selftest fastenings
2026-10-23 16:46:58 +02:00
