A Fields tool beside Fill: LMB outlines a field, which gets the material chosen in the palette
and is kept in a list (terrain/<name>/patches.txt, or in the manifest while there are few),
where its material, repeat, angle, transition and grass are changed later.
- painted into the terrain (the paint of the chunks, its edge blended over a transition and
shifted by a noise, the 3D grass under it left, taken away or of another kind), or
- a surface of its own: the ground cut away within the outline and the field drawn over the
hole as a mesh following the heights of the terrain, made around the camera as the water
is. It doesn't take one of the 8 materials of a chunk; its edge is sharp.
The ground under a field can be made wavy before: rolling hills, furrows, bumps, long waves,
a hollow or a mound, hummocks in a grid, strips of fields; with a profile (rounded, sharp
ridges, sharp valleys, terraces, flat tops), roughness, variation and a fade from the edge.
The chunks under it are made finer where the waves need it.
The formation modifiers get an optional natural shape (natural: wander, scale, gentler,
soften, roughness in the manifest): the formation and the edges of the track bed stay, the
slopes and their foot wander, get gentler and meet the ground softly. Without it the
modifiers shape the ground as before.
Formats: new optional entries patches, patches_file and natural of the manifest, and the
patches file; a terrain without them reads and saves as before, and the release doesn't read
them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DDcMn1Q7wdYkbxDUWscNHZ
A switch may lie on a concave vertical curve, and on a convex one no sharper than 2000 m (Dz.U. 2026 poz. 1225 § 58 ust. 16): the fit bends over the switches and their shared timbers where the ground does, a curve on a switch is a warning, and only a sharper convex one an error. A sharp crest of a hump keeps its curve off the switch zones. The zone of a crossing reaches only as far as the path crossed has rails, so the middle of a double slip keeps to itself.
A line runs through a switch along its main path, and through the quarters of a double slip straight on, so the long lines go through the slips and the connections between them are fitted after. Rails of the lines fitted already nearer than a sleeper is long are taken at their height, as both lie on the same timbers. A short line between two lines whose end grades can't be joined within the norms keeps only the heights of its ends, and the grade breaks at the joints. The norms speed of a line is the one most of its length is laid for, so a few tracks set much faster don't stiffen the curves of all of it.
The fault finder leaves out the places over the terrain model on a bridge or a viaduct, the ground falling away under them by the abutments. A formation modifier may be open at its start or end.
Labels:
- every button, field, tooltip and message of the editor reread for a beginner: short nouns for the fields with the
sentence in the tooltip, the less used options under More settings, one glossary (field of work, template, track,
grade), sides told from directions, degrees and per mille as signs, messages built from one format string
- plural forms through STR_P; the last entry of a po file is read too, and the Polish plural rule is in the header
- lang/editor_pl.po: the code pass entries merged, 391 entries no code uses and 3 duplicates dropped
- roads: the notes and errors naming a road translated; the build options and the layout fold the texture length,
kerb sizes, traffic share, roundabout part, height over the ground and junction speed limit under More settings, the
lanes start folded
Grade lines fitted to the terrain model (NMT), a line or the whole scenery at once:
- fit_ground: a robust fit on nodes 5 m apart; the ground parting from the line (a bridge, a viaduct, a wall) is gone
past rather than followed, the bends keep off the switches as far as their curves reach, a run of bends the same way
is one point of intersection, a curve with no room is as sharp as the room lets it be
- the ends of the line and the other paths of its switches leading into lines fitted already bound the line by what
the tracks between can climb; ends meeting in the plan, laid apart in height by hand, are joined before the run
- apply_profile: the paths are split where split_path takes the parameter (a straight was cut in the wrong place, into
pieces of a few centimetres the game takes for zero length), no piece shorter than the margin; the paths off the
ends of the route are brought to its height
- Bytom: 1600 lines, grade breaks at the joints 89 -> 20; Tarnowskie Gory: 848 lines, 223 -> 3; no step over 2 cm