maj00r
a0427bb80b
feat(editor): from the end of the diverging track of a switch the line laid always goes on with the curve of the switch: a straight or a bend the other way after P4 begins with the transition out of the curve of the switch, as after a plain track on a curve, never with a jump of the curvature, whether laid through points, traced, dragged in the straight layout or joined to another free end. The transition is the one for the speed the curve of the switch allows with no cant (about 48 km/h at R 300, so 20 to 30 m), not for the speed of the line. A straight with no bend clicked on from such an end runs on the way the transition leaves, as far as the point clicked, not along the tangent at the end, which left no room for the transition. Where no transition fits, as for a straight shorter than it, nothing is laid and the status says why
2026-10-25 17:26:26 +01:00
maj00r
f83a1a0cd2
feat(editor): the tracks onto the terrain from the terrain panel too: the terrain model (F5 Terrain) has a step 3, Tracks and terrain, with Tracks onto the terrain, the one to take first, big, what it does told under it (all the tracks go down or up onto the model, loaded along them by itself), then, after "Or:", Only the ones not fitted and Terrain under the tracks, each with a line of the case it's for; the same block stays in the panel of the tracks, under All the tracks of the scenery, with a line saying where the scenery is put on the map while it isn't. The progress of these is shown at step 3, the loading buttons of step 2 greyed meanwhile. The terrain lesson of the tutorial tells of step 3 so
2026-10-25 13:42:51 +01:00
maj00r
a312fd9935
feat(editor): with the gizmo hidden a track is changed by its ends only: its control vectors are neither drawn nor caught until Q, W, E or the buttons above the view bring the gizmo out, so a track selected won't bend by chance; the hints say what dragging an end does (a joint: the neighbours follow, a free end: a new track out of it, with Ctrl it moves). The tutorial has a lesson of its own for editing with the gizmo, after the one of selecting and fixing, which no longer speaks of it: the arrows, the rings, the handles, the control vectors, a point clicked, Ctrl and Esc, ticked off when the gizmo is out and a track bent or moved with it; thirteen lessons. Also puts back in place two lines of the band of the curvature which dd64b821 committed out of their place (the arc declared inside the loop, so that commit didn't compile)
2026-10-25 12:33:19 +01:00
maj00r
97b6a84d1b
fix(editor): a curve laid from a free end on a curve, or to one, goes on from its curvature: traced (Tab) from the end of the diverging track of a switch it begins right at P4 at the radius of the switch, not on a straight nor with a transition from a curvature of 0. The design of the line takes the curve of the adjoining track at each end (start_curved/end_curved with the radius, the side and the cant, kept with it in the scenery): the curve of the first vertex turning its way, or of the last one, begins right at the end, its transition going from that curvature and cant to those of its first arc, as between the arcs of a compound curve, none where it goes on at its radius; the radius of its arcs is the one which begins it there, solved for the tangent, the curves next to it making room on the straight. A curve traced next to such an end is fitted by its transitions alone, with none between the curves where the points keep to that as well, or laid from a straight there where it doesn't go on from it or that keeps to the points much closer: eased out of the curve of a plain track by the transition of the norms, the line beginning at its end, or right from P4, as a switch goes on with a straight. A bend of straights turning the way of the curve gets its curve going on from it with the transitions and the cant of the norms; the other way, or a straight, as before: eased out of the curve of a plain track, the jump of the curvature kept at a switch, as at its start, and not warned of. The cant of the adjoining track goes on into the curve with no ramp at that end; the norms ask for the transition between the curves only where the curvature differs by more than 5 % or the cant by 5 mm. The readout by the cursor, the status after laying and the plan tell the curve going on from the track, the plan with a box to go on or not. Dragged back to P4 from a point the curve goes on from its radius too. Selftests laywalk, laybends, curvejoint, endcurves; unit tests of a curve going on from a switch and into a free end, its cant, traced, through a transition into a larger radius, and of a bend of straights after such an end
2026-10-25 12:28:55 +01:00
maj00r
91900a0ead
fix(editor): the band of the curvature edits each arc of a compound curve: its arcs, elements of an even curvature, were taken for nothing to drag, and any change went to the first radius; now the plateau of an arc changes its own radius, a ramp between two arcs the transition between them, the ends of a plateau the transitions either side of it, by a drag or the wheel, the tooltip and the value shown while dragging naming the arc. The tutorial shows the correcting of a compound curve in a clip recorded in the editor in place of the drawing: the plan of the curve opened, the plateau of R2 dragged from 138 to 174 m, the line applied to the scenery
2026-10-25 12:01:12 +01:00
maj00r
cb766dabb4
feat(editor): the top view labels each curve once and each row of straights in line once, not each of their paths: a curve, from its first transition to its last, with the radius of its arc, of each arc of a compound one, its transitions and its cant (each arc's where they differ), as the plan reads it and as the laying shows it, in the middle of it; a straight row with its whole length. A piece of a transition curve no longer shows the radius of the arc as its own. The tutorial clips recorded again with them, in the top view: laying, the curves with a compound one traced (R 300/150) after the bend too sharp for the speed, a track selected with no gizmo, its control vector dragged and taken back, and the switches: one put into a track, a crossover between two tracks and a switch ladder laying its fan; the lessons of the curves and of the switches tell of the compound curve, the crossovers and the ladder
2026-10-25 11:35:25 +01:00
maj00r
bbb3e9e61e
feat(editor): laying and editing the track as a beginner meets them: the points clicked and not laid yet named at the top of the panel with Lay (Enter) and Drop the points, Enter shown by the bar at the bottom while there are some, and a first Esc over them only warning, the second one dropping them; the readout by the cursor kept in the 3d view, on the other side of the cursor where the view ends, with only the first warning of a curve and how many more the panel lists; the grid, the labels and the lines drawn over the view no longer seen through the docks; the gizmo in the tracks hidden until Q, W or E or its buttons above the view bring it out, an arrow there hiding it again, so a selected track isn't moved by chance; the radius of the curves at the bends headed so in the panel, the laid line told in metres and pieces, the hints of the select tool and of a straight shifted around an obstacle translated. An empty scenery opens facing north, the top view with the north up as the compass and the orthophoto have it (on LK2 Warszawa Wschodnia left, Rembertow right). The tutorial tells the laying as it works now: the bends clicked and Enter, the curves made at them and orange where too sharp for the speed, Tab for a curve traced, the radius by Ctrl+wheel when joining, the gizmo by Q W E, the terrain model loaded and fitted from the panel of the tracks, signals by I; its texts wrap to a dock it's put in, new clips of laying and of the curves, recorded with the selftest badge drawing the mouse or the key in use; the empty scenery and the shortcuts say the same
2026-10-25 11:02:45 +01:00
maj00r
e43863932d
feat(editor,track): a cant ramp of its own, off the transition curve: each end of a curve may have its ramp moved and of a length of its own (ST-T1-A6 9.6 pkt 5 and 11), on the straight before the curve or on the arc, the transition keeping the full cant all along, as a switch laid on it wants it; set in the plan under "Cant ramps", stored with the vertex as "ramps", reversed with the curve, marked across the track in the view. The cant of a line is a profile along it now, the paths cut where a ramp of its own starts and ends, their rolls following it, warnings where a ramp is shorter than its cant asks for or reaches into the curve before, past the line or over the other ramp. A switch on a cant ramp is drawn following it: its rails, blades, frogs and bed made at the mean of its rolls, as before, are turned along each path to the roll of the path there, so it no longer steps at its ends against the tracks either side. The checks of a switch laid into a curve warn of the values of table 11.9 in brackets as of the others, with no word of a consent. Unit test of a ramp moved onto the straight
2026-10-25 00:54:50 +02:00
maj00r
ece61056ff
feat(editor): a switch laid into a curve is checked by ST-T1-A6 as it's placed: the radii of its main and diverging tracks at its start and its end shown at it; warnings where the curvature of a track turns from one side to the other within it (KZW II, 9.7 pkt 12), where the diverging track is sharper or the main track bent more than table 11.9 allows the basic switch (the values allowed by way of exception named), where a switch of 1:9.403 or steeper is bent (11.4 pkt 4), where the cant changes within it (11.4 pkt 7), where a cant ramp starts or ends within it or under 6 m off it (9.6 pkt 16-17) and where the cant is over 100 mm (table 9.6); a note on a transition curve, which only an exception allows. The ends of the cant ramps are marked on the curve, and the start of the switch pressed within 3 m of where it starts or ends at an end of a ramp, or keeps the 6 m off it, is drawn there. The warnings stay in the status once it's laid. The checks stand on their own in editor/editorSwitchCurve, with unit tests
2026-10-25 00:29:05 +02:00
maj00r
aeef2cebb3
feat(editor): the plan shows which curve is edited: each named W1, W2... as its vertex is in the view, with its km and "Show in the view", which flies the camera over it; the part of it whose field the mouse is over or which is being edited (the whole curve, an arc of a compound one, the transition in, out or between two arcs) lit up in the view and named there with its radius, cant or length. The points clicked when a line is laid are kept with its design in the scenery ("click" lines, moved with it): the plan shows them in the colours of their departure and, while "Keep to the points clicked" is on, fits the radii of a curve whose transitions or cants are changed again to them, its transitions and cants as set; "Transitions for these cants" makes the transitions as long as the norms ask for at the radii and the cants set, an arc of a compound curve with no cant lengthening the ones either side of it. Unit test: 50 m between the arcs become 85 m, the curve 4 cm off the points clicked instead of 58
2026-10-25 00:11:58 +02:00
maj00r
2a399a92a5
feat(editor): each arc of a compound curve has a cant of its own, set in the Plan by each radius ("Cant of R1 (mm)"...), ramped along the transition curves between the arcs; until it's set, the cant of the curve in proportion to the curvature of the arc, as before, "auto" taking it back to that and "Apply recommended for V" all of them. The transitions between the arcs of the norms follow the cants set; warnings where the cant of an arc exceeds the norms, where the unbalanced acceleration does on any arc, and where a transition curve, at the ends or between the arcs, is shorter than the change of the curvature and of the cant along it needs. The labels of the curves show the cants of the arcs where they differ. Stored with the vertex as "cants", reversed with the curve; a unit test
2026-10-24 23:41:26 +02:00
maj00r
133ba9cb45
fix(editor): the heights from point to point broke the grade only at the bends of straights which stay bends, a curve traced or bends clicked close along a curve going at one grade from one of its ends to the other, attached there; and two tracks laid no longer meet at two heights where a point was clicked within 5 m of their joint, each end of a piece not cut there taking the height of its own stretch, not of the one the middle of the piece lies on (steps of 0.6 m on a steep grade in abc). Unit tests of the heights from point to point
2026-10-24 22:28:43 +02:00
maj00r
6bd3d4d19f
feat(editor): laying from the photo in two modes, Tab switching them in one row of points: the points clicked as bends of straights, eased with two transition curves meeting with no cant, of 3000 to 6000 m set in the panel, or with an arc of the norms where they don't fit; or the points along the middle of a curve seen on the photo, the last two on the straight after it, a curve, compound or two with a straight between them, fitted to them with its radii and its transitions. The points clicked are kept where they are, a curve below the norms laid with its warnings in the colour of one; the line shown as the points are clicked, laid by Enter in one step of the undo and going on from its end, Backspace taking the last point back, Esc dropping the points not laid. A bend after a free end or a curve traced goes along its straight, dashed; the curves labelled with their radii, transitions, cant and speed, the straights with their lengths, the points traced in the colour of how far the line is from them, the curves of the line listed in the panel. The Plan sets two transition curves with no arc for a vertex. Selftests laymode, layradius, laytrace, layp, layreport, layenter, layback, laycancel, laysample
2026-10-24 21:12:27 +02:00
maj00r
dcaf48d7b6
feat(editor): the editor knows which tracks have their grade line fitted: a grade line applied, fitted to the terrain model or with the profile, marks its tracks with the shape they have, kept in the scenery files as //$f lines; a track changed since, by hand, by K or taken back, isn't fitted any more. The terrain of the tracks in the panel of the tracks tells how many of the selected ones are fitted, and puts onto the terrain all the tracks or only the ones not fitted, these meeting the fitted ones as they are, the scenery not moved
...
Selftests: nmtauto [unfitted], fittedstate [reload].
2026-10-24 19:14:08 +02:00
maj00r
59c3458173
feat(editor): the terrain model in the field of work of the terrain only loads and keeps the model: its place, Load along the tracks or around the camera, the band, the offset of the heights, the progress and the faults, with no choice of what gives way; the tracks and the terrain are fitted to each other in the panel of the tracks. In a scenery with its terrain made from the model the terrain grows around the camera too, not only ahead of the laying; the chunks the growing gave up are not asked for again
...
The terrain follows the edits of the tracks with a formation only: a track with none is not shaped on its own any more, nor after the chunks made around it, and the formations are laid after a load only when the tracks are put onto the terrain or the terrain under them.
2026-10-24 19:02:29 +02:00
maj00r
7d0caee541
feat(editor): the terrain of the tracks in the panel of the tracks: Draw the terrain to the track, of the selected tracks or of their whole run, Restore the terrain, each one step of the history, the terrain following the tracks edited or not, and Tracks onto the terrain and Terrain under the tracks for all the tracks of the scenery
...
The formation of a track as it is already was taken out of the terrain when the track was shaped again, as after a change of its properties alone: the formations the tracks still have are no longer counted as gone. Selftest trackterrain pull|restore <tracks>.
2026-10-24 18:53:32 +02:00
maj00r
11d1342181
feat(editor): an end of a track dragged, and an end of a straight dragged by its handle, goes onto the ground at the height of the ballast, as a point laid; with Shift held it keeps its height
...
Selftest trackends: the ends of a track against the ground under them.
2026-10-24 18:45:47 +02:00
maj00r
9625b4b3d9
feat(editor): K on a track is a break of the grade, as a point of a road: the track split at the cursor, the point between the two at the height of the ground and the ballast there, each of them an even grade from its other end up to it
...
Selftest kbreak: K on the track nearest a point, logs the joint against the ground.
2026-10-24 18:41:25 +02:00
maj00r
641619e13f
feat(editor): the point of a track laid where there's no terrain yet, as over the base map of the top view, takes the height of the terrain model with the offset of the scenery and the ballast, the model under the cursor asked for while laying; the fitted heights of the laying called a smoothed grade line in Polish
2026-10-24 18:37:44 +02:00
maj00r
2ae10f5901
feat(editor): the chunks waiting for the terrain model and the tiles of the orthophoto asked for and not shown yet outlined on the ground where they will be, pulsing, blue and orange, named where the name fits: at the heights of the terrain beside them or of the model, else level with the nearest chunk or track
2026-10-24 18:31:24 +02:00
maj00r
336c940c28
fix(editor): laying leaves the terrain as it is: the track takes from the ground only the heights of the points clicked, from point to point by default, and no formation is led into the terrain after it, nor after a track dragged from a free end; the terrain made from the model never makes a chunk there is anew, made from the model or by hand, edited or not, only the missing ones, the formations laid anew as the tracks lie
...
The terrain under the tracks and the end of Tracks onto the terrain took every chunk along the tracks away and made it again from the model, the changes made by hand with them (79 chunks on test2). The heights while laying are kept under a key of their own, so the fitted ones chosen when they were the default are left behind; fitted stays a choice.
2026-10-24 18:20:22 +02:00
maj00r
36904c2815
feat(editor): buttons in the switch tool setting a model of timbers on all the switches and crossings of the scenery at once, one for each model of timbers of the scenery data and one for the model of eu07.ini, in one step of the undo; the selftest switchtimbers does the same
...
(cherry picked from commit 81a6b855d0
2026-10-24 16:33:41 +02:00
a83d5c6978
feat(editor): presets of the track properties, applied on the selected tracks
...
(cherry picked from commit 83c8c23c80
2026-10-24 16:33:24 +02:00
7e284b293d
feat(editor): texture of the rails of path 2 of a switch set apart
...
(cherry picked from commit 16c77ab6fb
2026-10-24 16:32:35 +02:00
maj00r
4d2f95aa43
feat(editor): the tracks laid on the terrain model go onto it as the tracks going onto the terrain do, the chain laid since the laying began fitted again at each click, with the tracks around kept and met; a straight or an arc cut by the fit before made one again, a path cut only where it would part from the line by more than 3 cm; a choice of the heights while laying: fitted, from point to point, level, kept in the settings; the fit taken back with its click
2026-10-23 15:55:58 +02:00
maj00r
5e846018b6
feat(editor): far out the top view shows the base map of OpenStreetMap from geoportal.gov.pl in place of the imagery, tiles as large as the view needs, the ground not drawn under it nor streamed as far as the view; the tracks over it in the colour of the rails, blue by default, and the joints of the pieces left out far out
2026-10-23 13:35:07 +02:00
maj00r
a892532fda
feat(editor): the top view draws the tracks whole, without the ballast or the rails alone, in a colour of their own over the imagery and the map: both rails close up, one line further out; a choice by the extent and in the View menu, kept in the settings
2026-10-23 13:20:06 +02:00
maj00r
fe3dd758ea
feat(editor): the signalling, the hectometre posts and the terrain go to layers of their own: <scenery>_srk.scm, _hektometry.scm, _teren.scm, made by the first of them and included by the scenario file, the active layer left as it is; the station descriptions of the signalling there too
2026-10-23 13:07:14 +02:00
maj00r
eab3dca700
feat(editor): the Signals tool goes into the signalling one: its templates under Signals in the SRK panel, the ones the station's signals are placed with too; a click on a tile or Place by a track arms placing, Esc or a click on the armed tile stops it, a click on a track else opening its station; a signal picked in 3D or in Signal heads shows its card at the top of the panel, its template, to the other side, turn around; H no longer a tool
2026-10-23 12:26:07 +02:00
maj00r
2d9be3ae10
feat(editor): a deleted track leaves its signal reads and its track circuit to the track laid in its place, and the SRK check lists the signals no track reads and the broken lines, with a Repair
...
A deleted track whose read events or track circuit no other track took says so by the cursor, naming the signals and the circuits, and the editor keeps them for the track laid in its place, within a metre of its axis. The read of each signal goes to the piece by the signal, on the list its facing there gives, so a track laid the other way round keeps the trains reading it; the other events go to the piece at its middle, the circuit to a track lying there for the most part, a new track taking it instead of the one of the track it was made from. It happens in the step which lays the track, so Ctrl+Z takes it back and laying it again gets them again; a track which took a circuit over and is removed by another step leaves it to that step, and the events of a signal taken away stay off the tracks.
The SRK panel of a station lists what it and its lines need: signals no track reads, lines broken off where the tracks go on beyond a gap, tracks of a line of the automatic block in no block section, block sections whose tracks are gone. A row shows the place; Repair has the track by each signal read it again, as moving it does, and sets the line signals again where tracks are in no block section. A warning after an operation shows by the cursor in amber, a refusal in red as before. srkcheck counts these too, srkfix repairs, join takes the height of the ends for sceneries far above zero.
2026-10-22 22:40:01 +02:00
maj00r
c024d7c262
feat(editor): the signals and the signs by a track go with it as the Plan lays it anew, square to the line, not along it
...
A curve laid anew, its radius changed or made compound, or a straight moved: the paths of the chain are cut again where their joints stood, set square onto the new line, each keeping its stretch of the ground, so their events, their track circuits and the cuts of the block sections stay where they were instead of being handed on along the line; the parts between the switches alike, the old even sharing kept where the joints don't follow one another along the new line.
The objects by a track taken for a change go with it by themselves: the signals and the warning discs it or its run reads, the SHP resonators by their events, and the controls of the block sections, the hectometre posts, the W17 markers and the other signs by the track nearest to them, within 12 m. They move square to the new axis keeping their offset and their turn, an object moved by hand meanwhile staying where it was put. Such a binding isn't kept in the scenery nor shown among the bound objects of the infra tool, which can still bind the object for good, and the undo and the redo take the objects back and forth with the tracks. The status of the Plan tells how many objects moved with the tracks. A path taking an object over the other way round keeps it on its side, turned as it was.
2026-10-22 21:32:34 +02:00
maj00r
4c55951d8a
feat(editor): the automatic block both ways or mixed, and the lines out on the schematic
...
A block boundary of a line both ways has, on each track, the block signal of its trains 15 m before the joint and the one of the wrong-track trains 15 m beyond it, named after its twin with N, both on the outside of the line, the templates leaning the other way picked for the N ones, as on the lines of PKP PLK. The mixed block keeps the automatic block for the trains of the track and the semi-automatic one for the wrong-track ones: no N signals, a warning disc the braking distance before the entry signal of the wrong-track trains. A choice under the table of the lines sets either for the double-track lines of the station, kept in the record of the station, and by itself a line takes the mixed block where a warning disc stands for its wrong-track trains and no N signal does. Set the line signals places the N signals or the warning disc and takes the other away, a block boundary drawn places the N signals of a line both ways, and sbl_odstep.inc switches both block signals of a section with its 7th parameter. The name shown at the mouse while drawing takes the letter the block signal will get where its number stands already.
The station schematic shows the lines out to the next stations straightened: their block sections in the colours of their names with their lengths, the joints, the block signals and the warning discs with their km on the outside of the line, the axis in km; Lines fits them in, a section under the mouse tells its name, length and km, and a click on it flies there in the 3d view.
2026-10-22 20:47:52 +02:00
maj00r
d090e93c81
fix(editor): a block boundary drawn places its signal across only where the other track runs near, the hover and the click count the block signals facing the trains alike, an SHP resonator at a joint finds the piece of a track cut for another one, and a batch of signals missing its template changes nothing but the tracks cut, Ctrl+Z taking them back; the km of each line kept for the hover, the shorter block section named in its warning, the block column wider
2026-10-22 19:51:55 +02:00
maj00r
a3e1624caf
feat(editor): the lines out of a station take the automatic block of 3 or 4 aspects, the block sections no shorter than the braking distance or than half of it, the block signals placed with the templates of the aspects and those standing swapped for them; block boundaries drawn by hand, a click on a track of a line of the automatic block placing block signals across both tracks there, numbered after the hectometre, the tracks cut beyond them and the block sections named and switched anew, a click on one standing taking its signals and the switching of their sections away, a step of undo each, the lengths of the sections either side shown at the mouse. A line whose block signals stand keeps them as they stand, Set the line signals placing them evenly only on a line without any, and one whose block signals no block section of the editor switches keeps the block of the scenery untouched; the signals of the other block left along a line taken away, but where it shares its track with a line of that block, and the switching of the sections gone from the lines set with them. A block signal of 4 aspects is checked for a section no shorter than half the braking distance, and fitted with templates of its aspects only
2026-10-22 19:26:26 +02:00
maj00r
fc0b9b46e8
feat(editor): the table of the lines out of a station marks the signals of the other block left standing along a line, warning discs on one of the automatic block, block signals on one of the semi-automatic one, a click flying to the first of them
2026-10-22 19:06:52 +02:00
maj00r
9ea3628661
refactor(editor): the SRK tool judges the SHP resonator of a signal in one place, missing, beyond the tracks, off its place or placed, and picks the place of a resonator, a joint or a cut, apart from placing it; the nearest point of a track to a signal found coarsely and narrowed down rather than by up to 4000 points. A resonator whose event would land away from its place, the track not cut there, is left out with a note, and the status after a failed placing tells Ctrl+Z takes the cuts back; the lines out of a station emptied while the signal templates are looked for, the layout of the station read only once it's known open
2026-10-22 19:06:49 +02:00
maj00r
fc6d1158bd
feat(editor): the SRK tool shows the block of each line out of the station and places the SHP resonators: the automatic or the semi-automatic block chosen in a table of the lines, by hand or by the block signals standing along it, a double-track line taking the automatic one, a single-track one the other, kept in the record of the station; the block signals placed only on the lines of the automatic block, the warning discs only on those of the semi-automatic one. The heads checked for their resonators 200 m before an entry signal, a block signal and a warning disc and at an exit signal telling of the next one, 5 m either way, those of the old sceneries found by any event ending with _shp within 100 m; the ones missing placed as rezonator.inc with their events on the tracks the trains run into, at a joint within 5 m, else the track cut, in one step of undo. A signal stands by the track of its read event only when it lies near it, else by the nearest track, so a read event put on a track before the signal no longer shifts its routes
2026-10-22 18:55:21 +02:00
maj00r
edb4f7c60d
feat(editor): the panel of a signal picked swaps its template for another of its kind and mount, the name, the plate, the place and the read event kept, a head leaning to one side for its counterpart leaning towards the track; one step of undo, the selftest signalswap
2026-10-22 18:55:13 +02:00
maj00r
a811486b53
fix(editor): the pin of the signal under the mouse in the list of the signal heads stands over its name, clear of its lamps; the routes name the switches they turn off the straight at, a plural for several, and the Polish of the tooltip reads plainer
2026-10-22 17:55:05 +02:00
maj00r
92552b49cd
feat(editor): the SRK tool checks the lights of the signals against the routes of their trains: the speed of each route through the switches by the radius of their curves and the speed set on them, 40, 60 or 100 km/h, a lower orange light for these with an orange strip for 60 and a green one for 100 as Ie-1 gives them, an upper orange one where the next signal can show stop, the white one of the substitute signal; a signal telling of the next one nearer than the braking distance slows the trains with it at stop, Ie-4 § 8 ust. 5, a W21 for 140. The templates read for the speeds their events show; the signals set get the template of the kind with these lights and the least beyond them, the standing ones fitted so in one step of undo, the template swapped with the name, the plate and the read event kept, a variant leaning the other way only with the same speeds. The braking distance shown with the speed of the main tracks it follows, set by hand in the record of the station and used for the block sections too; the warning discs and the block sections nearer than it marked, the signals that don't fit marked in the schematic and the scenery
2026-10-22 16:07:04 +02:00
maj00r
43346b61e7
feat(editor): the SRK tool measures the station tracks: the construction length and the useful one each way, as the rozporządzenie on the railway structures (Dz.U. 2026 poz. 1225) § 2 defines it, from the signal the trains stop by back to the joint, the fouling point or the level crossing behind them, between those where no signal stands; the switches within a track part it into stretches. A list in the panel with the longest train, the two ways marked where they differ, the track under the mouse or selected drawn in the schematic and the scenery, the list copied as a table
2026-10-22 15:24:02 +02:00
maj00r
a217c9ba75
fix(editor): the hectometre posts write the km at the point on a line of its own under the kilometrage of the line, the wrapped text broke the number at its comma
2026-10-22 14:42:42 +02:00
maj00r
192dfd2035
feat(editor): the signalling mode takes the km of the station and of the block signals from the kilometrage of the line where the Kilometrage tool sets it, jumps included, the way the km rise from its axis, the line of each line out at a junction too, the station of a line set there without typing its number
2026-10-22 14:33:18 +02:00
maj00r
435b80eb55
feat(editor): the hectometre posts go by the kilometrage of the line where the Kilometrage tool sets it, its jumps too, a post at a jump of the km on from it or of the km it is reached at, the km given at the point still there as a choice; the posts standing go with the place of their number nearest to them
2026-10-22 14:33:18 +02:00
maj00r
7cc8e5bb9a
feat(editor): the kilometrage tool leads a line through a station along the tracks chosen, the straight paths of the switches by default, from the track chosen on along them until the line meets its tracks again or on and away at a junction, kept as //$k via lines; a track beside that comes back onto the line between the stretches it runs beside it or both ways is a track of a station, not the other track of a double-track line
2026-10-22 14:16:42 +02:00
maj00r
5ecb6ebe00
feat(editor): the kilometrage tool sets the km of the railway lines, points where the km is known and jumps of the km, the rest along the axis of the line, between the tracks of a double-track one and along the longer track where they run apart, kept in the scenery as //$k lines
...
The track mode Kilometrage (X, under More) puts a point of the km where a track is clicked: the line, the km and, at a jump,
the km on from it. The axis of a line follows the main paths of the switches through the tracks of its points; on a
double-track line it runs between the tracks, and where they part on formations of their own and come together again it
runs along the longer one, the shorter one going by its own length with its last hectometre before they meet taking up
the difference (PKP GK-1 6.1.12). The km between the points are stretched to the length of the scenery evenly; the panel
lists the points with the stretch, the 3D view shows the axis, a tick at each hectometre, the points with their km and
the km of the lines by the mouse. Read the km from the posts turns the hectometre posts along the line into the points
of its km, a jump where two runs of numbers meet, and warns of a jump on a curve or at a station (Id-1 § 19). Each change
is a step of undo.
2026-10-22 13:27:37 +02:00
maj00r
f287ecf840
fix(editor): the signalling mode places the joints and the signals as Ie-4 gives them, a branch joint 4.2 m beyond the fouling point, the joint a main signal drops at 15 m beyond it, the block sections no shorter than the braking distance of the line and the warning discs that far out
...
The block signals are numbered after the nearest hectometre of their parity ahead of them, and two signals no longer take one spot between the tracks.
2026-10-22 12:34:53 +02:00
maj00r
2b40a36173
feat(editor): the switch numbering of the signalling mode renames the switch in the objects of the scenery naming it, as the lanterns of the switches
2026-10-22 12:13:22 +02:00
maj00r
46e665c468
feat(editor): the signalling mode sets the signals of the lines out of a station, the automatic block signals and the block sections to the next station on a double-track line, a warning disc before the entry signal on a single-track one
...
The station keeps its km and the direction of its numbering in its record. The block signals are named after their km, odd on track 1 and even on track 2, the sections after the signals at their ends, and each signal gets the control of its section.
2026-10-22 12:13:22 +02:00
maj00r
8f8a1518b7
feat(editor): the signalling mode places the signals of a station and names them as PKP PLK does, the entry ones out on the lines with the circuits before them, the exit ones at the ends of the station tracks, the shunting ones at the shorter tracks, and renames the signals standing in their places
2026-10-22 11:07:58 +02:00
