The formation of a track as it is already was taken out of the terrain when the track was shaped again, as after a change of its properties alone: the formations the tracks still have are no longer counted as gone. Selftest trackterrain pull|restore <tracks>.
Fitting the grade line took 3 ms for 250 m of track, 30 ms for 1 km, 65 ms for 2 km and 200 ms for 4 km, and the preview of the lay tool and of the drag from a free end fitted it every frame, twice for the drag; on the terrain model the preview of some 800 m took 10 to 17 ms a frame, the cursor standing or not. Now the frame waits under 1.5 ms for 4 km. The formations of the tracks led into the terrain went through every chunk under them 0.3 s after each click, some 50 ms, while the cursor went on to the next point; they wait for the laying to end. The tracks laid and the terrain are the same as before.
Selftests: perf logs the longest frame and those over 33 ms, fittime the time of the fit by length, terrainhash a hash of the chunks in memory.
Laid to the norms, the readout says the design speed of the transition curves and of the cant: that of the track the laying goes on from or joins, or the one set for the laying. A new option takes the set speed also on from a track with its own, the new tracks get it; Ctrl+Shift+wheel steps it while laying and turns the option on. The panel shows the speed the laying under way is designed for.
The free laying isn't the default any more. The first time a session opens the laying or the plan, a window asks how the
new tracks are laid, with the two cards of the panels (the norms marked as chosen); a click on one of them takes it and
closes the window, which comes before the offer of the terrain model of a new scenery. "Remember the choice, don't ask
again" keeps it in eu07_editor.ini (track_norms ask, free or plk), and a choice kept follows a later click on the cards of
the panels; the settings of the editor (General) choose between asking and either way. The self-test scripts start with the
free laying, as they were written for it.
The third tool out of editor_mode. It reaches the terrain model and the
places of the tracks on it through the services, the place of a track
for the terrain model is a type of its own now, and the laying and the
switches ask the tool for the kink it allows. A self-test command can
ask to be run again in the next frame, as the check against the terrain
model does while the model comes in.
The first step of taking the tools out of editor_mode: a tool keeps its
own state and reaches the editor through editor_services, the few things
it needs from it, instead of through every member of the editor. The
editor holds its tools in a list for the hooks they share: a deleted
node is forgotten by all of them in one place, and a self-test command
the editor doesn't know goes to each of them.
The gauge moves with its state, its window and its self-test command;
the ImGui ids and the texts stay the same, and the self-test gives the
same hits on the test scenery as before.
Labels:
- every button, field, tooltip and message of the editor reread for a beginner: short nouns for the fields with the
sentence in the tooltip, the less used options under More settings, one glossary (field of work, template, track,
grade), sides told from directions, degrees and per mille as signs, messages built from one format string
- plural forms through STR_P; the last entry of a po file is read too, and the Polish plural rule is in the header
- lang/editor_pl.po: the code pass entries merged, 391 entries no code uses and 3 duplicates dropped
- roads: the notes and errors naming a road translated; the build options and the layout fold the texture length,
kerb sizes, traffic share, roundabout part, height over the ground and junction speed limit under More settings, the
lanes start folded
Grade lines fitted to the terrain model (NMT), a line or the whole scenery at once:
- fit_ground: a robust fit on nodes 5 m apart; the ground parting from the line (a bridge, a viaduct, a wall) is gone
past rather than followed, the bends keep off the switches as far as their curves reach, a run of bends the same way
is one point of intersection, a curve with no room is as sharp as the room lets it be
- the ends of the line and the other paths of its switches leading into lines fitted already bound the line by what
the tracks between can climb; ends meeting in the plan, laid apart in height by hand, are joined before the run
- apply_profile: the paths are split where split_path takes the parameter (a straight was cut in the wrong place, into
pieces of a few centimetres the game takes for zero length), no piece shorter than the margin; the paths off the
ends of the route are brought to its height
- Bytom: 1600 lines, grade breaks at the joints 89 -> 20; Tarnowskie Gory: 848 lines, 223 -> 3; no step over 2 cm
editormodeselftest.cpp keeps the dispatch, the list of the commands and the step; the groups go to
editormodeselftest{scene,sleepers,sweep,track,switch,join,signal,terrain,rails}.cpp, the sleeper commands (beams,
sharedzones, sleepersbg, beamsnear, sleepercheck) in a group of their own; the frame count and one_line shared through
editormodeselftest.h. The output of geomhash, sleepercheck, wings, space, guards, crossings and switches is the same on the
seven sceneries of the regression.
- the panel shows the scope and what's found first, then Place and Move for all, then each missing or wrong marker with its
own button and a click flying the camera there; the spacing, tolerances, height, model and turn are under Settings
- a click on a green point (no marker) or a red one (marker standing wrong) in the view puts or moves that marker alone
- the check starts around the camera
- one camera flight, fly_to, instead of four copies of it
- self-test fouling show=1 and place=one
- the switch tool asks what to place: a switch, a slip switch, a crossing or a connection of tracks (crossover, double,
scissors, ladder), with the templates and the options of that kind only and one line of how to place it with the mouse;
the bar of hints says the same, the wheel keys of a connection included; panel in its own editormodeswitchtool.cpp
- templates are listed by their names, the lengths a and b and the rest of the label in the tooltip
- the panel of a selected switch shows its length, its type and its drive; the name, number, rail, kilometre and angle are
under Details
- one toolbar: the tools are no longer drawn a second time down the edge of the view; the track tools show select, lay,
plan, switch and parallel, the others behind More, which starts closed again (setting track_tools_all)
- the infrastructure tool has no button nor key
- the gizmo options start closed, the node bank isn't drawn in the track mode
- no drive models: said in plain words
- self-test switchkind
- SleeperRules: the rules beams are laid by and the faults counted where the layout breaks them
- SleeperGeometry: plan helpers, beam boxes with their overlap and support tests and a grid of cells, shared by laying, filling
gaps, keeping beams apart and checking instead of three copies of each
- SleeperPaths: sampled paths, how near they run and whether one carries another; the tracks near a track and the stretches of
a path where a test holds, shared by paths_around/unsettle_around and shared_zones/zones_of
- SleeperFeatures: frogs and crossings the timbers turn to; SleeperLines: lines of beams, the rails they carry, where they part
- SleeperLayout: clusters and their layout, given the epoch instead of reading it; SleeperModels: the models of the beams
- SleeperWorker: the layouts kept per epoch and worked out in the background, behind a small interface
- TrackSleepers: the facade, laying the instances, the shared zones and the check
- sleepercheck reports a digest of all beams; geomhash skips empty chunks instead of crashing
The layout is unchanged: geomhash, sleepercheck with the digest, wings, space, guards, crossings and switches give the same
output on baltyk, zz_rozjazdy_id4, zz_rf_slips, zz_rf_wide, zz_slips_s42, zz_demo_przechylka and zz_connections.
- sleepers3d / sleepers3dplain / sleepers3dbed in eu07.ini: timbers put together from the begin, main and end parts of a model
and stretched to their length, plain sleepers of their own model; tracks whose plain sleepers would touch are laid as one
cluster, lines of timbers led by priority and turned to the bisectors of frogs and crossings at a limited rate, whole timbers
under crossings, split ones between tracks with room to part them, gaps filled per rail and overlaps shortened or dropped;
clusters worked out in a background thread while driving, on demand in the editor
- the ballast can be left out under the beams (sleepers3dbed no)
- blades get their heel and throw from the switch template or blades <heel> <throw> in the scenery; blades of double switches
run on into the track linking them to the next switch
- rail cutting at frogs, wing rails, movable noses and switch crossings done by one carving pass (RailCarve)
- tint of the rail treads applied to the colour only, without the matte band at the frog
- a switch trailed through with a movable nose set the other way derails the vehicle
- self-tests: sleepercheck, sharedzones, beamsnear, throw, sleepersbg
The frogs, crossings and check rails of feat/rail-crossings next to the track editor and the switch paths made of pieces of feat/track-join-ux. The self-test commands of the crossings (frog, geomhash, frogkey, guards, railtime, crossings and switches 0|1, now called throw 0|1 because the editor already has switches) go into their own group selftest_rails.
