* fix: automatic coupler crashes, horns, compressor start delay, radio and cab lever sounds
fix(cab): the line contactors lamp goes out with the pressure switch (eu07/maszyna#470)
The lamp of the open line contactors, which tells the start can be made, went out at 1 bar in the brake
cylinders, while the pressure switch cuts the start off only at 2 bar (or below 3.6 bar in the main pipe), so
with the brakes partly applied the start could be made with the lamp out. With a pressure switch fitted the lamp
now follows it; without one it goes out at 1 bar as before. The same holds for the lamp of the second unit, which
used to keep its last state between 1 bar and the cut-off. The condition is
TMoverParameters::LineContactorsLampLit().
Tests: tests/unit/test_line_contactors.cpp.
refactor: Sonar findings of PR 217
- horn_supply::pneumatic shadowed the pneumatic enumerator of the sound flags (cpp:S1117), it's horn_supply::air;
the supplies read with using enum (S6177),
- CouplerForce(): the automatic coupling refused or caught without another level of nested ifs (S134), the
same outcome: too fast, the coupling is locked; caught, coupled and locked; otherwise left to try again,
- CompressorCheck(): the power the compressor doesn't draw yet noted without a TODO (S1135),
- tests: the previous crash damage setting in an in-class initializer (S3230), the loops which stop early with
break rather than in their conditions (S886), the stand-ins of test::pair in a std::vector rather than an array
(S5945), units in the comments of the example without /* */ (S1103).
test: the cases the changes of the branch left without a test
- Cntrl.: BDelay1 to BDelay4 reach the brake delays (now through std::format), the default start types of the
ground and converter overload relays of a multiple unit and of other vehicles (out of the nested conditionals),
- the compressor: fed from the low voltage it waits from the low voltage coming on; the pressure switch stops it
above the cut-out pressure, without one the excess air is vented (the vented fraction rewritten),
- the horns: a vehicle without any air sounds as before, the threshold pressure, an electric horn on 110 V,
- the positions of a cab control below zero, and a control without position sounds.
refactor(cab): the kind of the train heating switch as a flag
Read once with the vehicle definition, rather than compared as text in each of the switch commands.
feat(cab): train heating switch springing back (MaSzyna-EU07/maszyna#85)
TrainHeating=[toggle]|impulse in the Switches: section of the vehicle definition makes the train heating switch
an unstable one: it goes up to switch the heating on, down to switch it off, and back to the middle once let go,
instead of staying where it was put. The position of such a switch isn't set from the heating state when the cab
is entered.
Tests: tests/unit/test_switches.cpp.
feat(sound): mirror sounds (MaSzyna-EU07/maszyna#84, eu07/maszyna#322)
The sound definitions of a vehicle (.mmd) take mirroropen: and mirrorclose:, played as a mirror sets off
unfolding or folding, and the locations section mirrors: <offset>... end, the offsets along the vehicle of the
mirror pairs, as for the doors (negative ahead of the centre), each pair at the sides of the vehicle. As the
animation, only the mirrors at the occupied cab sound. The start of a move is mirror_moves::motion in
vehicle/mirrors.h.
Tests: tests/unit/test_mirrors.cpp.
feat(cab): joint oil and fuel pump switch (MaSzyna-EU07/maszyna#81)
A cab control oilfuelpump_sw: switches both the oil and the fuel pump at once, with the new command
oilfuelpumptoggle (no key by default). As a two-state switch it turns both pumps off when both are on and both on
otherwise; as an impulse switch it's held to start them, like the separate pump switches. Its position follows
the pumps when the cab is entered.
refactor(editor): text fields filled without strncpy (MaSzyna-EU07/maszyna#112)
The last three strncpy calls Sonar flags (cpp:S5816), in the road and track editors, copy the text into the
ImGui field buffers with std::string::copy and terminate it right after; the text gets cut to the buffer as
before.
fix: automatic coupler crashes, horns, compressor start delay, radio and cab lever sounds
- automatic couplers don't catch above the safe collision speed (#86): with crash damage on they couple at a
closing speed of 15 km/h at most, a faster hit locks the coupling until the vehicles part and the collision
runs its course. On the way: CollisionVelocity() read a head-on 10 + 10 km/h as 14.1 km/h (quaternions turn
by half the angle), it's now taken from the touching ends; CollisionDetect() took the other vehicle's speed
the wrong way round for vehicles facing each other. Head-on hits now derail sooner, at the intended limit,
- a single horn lever can't sound both tones at once (eu07/maszyna#392),
- a skid ends once the vehicle stops on locked wheels (eu07/maszyna#479),
- electronic destination signs are blanked at the end of the timetable (eu07/maszyna#446),
- horns need the air or the voltage to sound (eu07/maszyna#290, #76): HornType=[Pneumatic]|Electric and
Horn3Type in Cntrl.; a pneumatic horn needs 0.2 MPa in the main reservoir (or the main pipe without one),
an electric one the low voltage; the lever stays where it was put,
- compressor start delay (#67): CompressorStartDelay [s] in Brake., counted from the compressor getting its
power, after the engine starts say; none by default,
- the channel and volume buttons of a radio without power do nothing (eu07/maszyna#429); the power check of
the radio is TMoverParameters::RadioPowered(),
- a lever moved smoothly sounds the positions it passes (#83).
Sonar findings in the functions changed: nesting, nested conditionals, commented-out code, std::format,
references to const. Unit tests: test::pair for two vehicles running into each other, test_couplers,
test_horn, test_wheelslip, test_compressor, test_radio, test_gauge_positions.
* fix: review findings of PR 217
- the pressures of the mover are in bar (MinCP=7.0 in the vehicle definitions), so the 0.2 the pneumatic horns
needed was 0.2 bar; it's 2 bar now, and the tests take their pressures in bar too,
- the lamps of the ground relay and of the motor overload relays follow the pressure switch as the line
contactors one does, TMoverParameters::MainCircuitLampsEnabled(), so the lamps of one cab go out together,
- the joint oil and fuel pump switch leaves out a pump started automatically, which ignores the switching:
with one, it couldn't turn the other off, and showed off with both running (OilFuelPumpsEnabled()),
- the kind of the train heating switch comes from the occupied vehicle on entering the cab too, as in the
switch commands; in a multiple unit these are different vehicles,
- CouplerForce() put the force taken back by the other vehicle on its far coupler when the vehicles faced each
other (Couplers[1 - End] rather than the coupler it's coupled with),
- the velocity difference along the coupler axis computed once, CouplerVelocityDifference(), for CouplerForce()
and CollisionVelocity(),
- the attachcoupler flag added without the SetFlag() call with 0, the index of the mirror moves noted as by side.
Tests: the coupler force of vehicles facing each other, the joint switch with an automatic pump, the lamps of
the main circuit, the horn and compressor pressures in bar.
* fix: coupler force of vehicles facing each other taken back along the other vehicle's axis
CForce runs along the axis of its own vehicle, so the force the other vehicle takes back on its coupler of the pair
is turned around once more when the vehicles face each other (-CF * DirPatch()), as that vehicle computes it itself.
Tests: the coupler forces of the pair facing each other and facing the same way.
Labels:
- every button, field, tooltip and message of the editor reread for a beginner: short nouns for the fields with the
sentence in the tooltip, the less used options under More settings, one glossary (field of work, template, track,
grade), sides told from directions, degrees and per mille as signs, messages built from one format string
- plural forms through STR_P; the last entry of a po file is read too, and the Polish plural rule is in the header
- lang/editor_pl.po: the code pass entries merged, 391 entries no code uses and 3 duplicates dropped
- roads: the notes and errors naming a road translated; the build options and the layout fold the texture length,
kerb sizes, traffic share, roundabout part, height over the ground and junction speed limit under More settings, the
lanes start folded
Grade lines fitted to the terrain model (NMT), a line or the whole scenery at once:
- fit_ground: a robust fit on nodes 5 m apart; the ground parting from the line (a bridge, a viaduct, a wall) is gone
past rather than followed, the bends keep off the switches as far as their curves reach, a run of bends the same way
is one point of intersection, a curve with no room is as sharp as the room lets it be
- the ends of the line and the other paths of its switches leading into lines fitted already bound the line by what
the tracks between can climb; ends meeting in the plan, laid apart in height by hand, are joined before the run
- apply_profile: the paths are split where split_path takes the parameter (a straight was cut in the wrong place, into
pieces of a few centimetres the game takes for zero length), no piece shorter than the margin; the paths off the
ends of the route are brought to its height
- Bytom: 1600 lines, grade breaks at the joints 89 -> 20; Tarnowskie Gory: 848 lines, 223 -> 3; no step over 2 cm
- sleepers3d / sleepers3dplain / sleepers3dbed in eu07.ini: timbers put together from the begin, main and end parts of a model
and stretched to their length, plain sleepers of their own model; tracks whose plain sleepers would touch are laid as one
cluster, lines of timbers led by priority and turned to the bisectors of frogs and crossings at a limited rate, whole timbers
under crossings, split ones between tracks with room to part them, gaps filled per rail and overlaps shortened or dropped;
clusters worked out in a background thread while driving, on demand in the editor
- the ballast can be left out under the beams (sleepers3dbed no)
- blades get their heel and throw from the switch template or blades <heel> <throw> in the scenery; blades of double switches
run on into the track linking them to the next switch
- rail cutting at frogs, wing rails, movable noses and switch crossings done by one carving pass (RailCarve)
- tint of the rail treads applied to the colour only, without the matte band at the frog
- a switch trailed through with a movable nose set the other way derails the vehicle
- self-tests: sleepercheck, sharedzones, beamsnear, throw, sleepersbg
