maj00r
704511fe5e
feat(editor): the plain straight a switch branch leads into gets its end moved to where the branch lands instead of a short straight being added: shortened when it reaches past, lengthened when it ends short; straights drawn with handles count (the trimmed end loses them), so a switch slid up to a track that ends close to the crossing now places
2026-10-12 00:36:13 +02:00
maj00r
b27d1772a7
feat(editor): a switch being placed slides along its straight first, so its branch lies on the line of the track it leads into (a straight between, or an arc of the switch radius right after it with the arc ending at the track's end); only when the slide leaves the straight it stays put and reverse curves fill in; the straight between reverse curves takes the speed of the switch's branch (R<300 40, <500 50, <760 60, <1200 80, <2500 100 km/h) instead of the track's
2026-10-12 00:25:01 +02:00
maj00r
d4d2a02018
feat(editor): the switch no longer slides to meet the track, only the straight and arc fill in: arc of the switch radius between two straights, and where the angles match but the tracks are apart, or the arc doesn't fit, reverse curves with no transitions and the largest radius that fits; the straight between them (6 m to V 60, 0.15 V to 100, 0.25 V above) only when 1/R1 + 1/R2 > 1/106.5 m (PLK ST-T1 9.3, table 9.4); new pieces take the style of a plain track, not of a switch
2026-10-12 00:09:49 +02:00
maj00r
0a73550c8d
feat(editor): the branch of a switch leads into the free end of a track: when the angles match the switch slides so its branch lies on the track's line, otherwise an arc of the switch radius right after the switch turns into it (with a straight between for a parallel track); works while placing a switch (drag toward the end) and when dragging from the branch end of a placed one, the track is shortened when it reaches past the branch; self-test switchlink / branchlink
2026-10-11 23:53:18 +02:00
maj00r
4030797b21
refactor(editor): the layouts laid from a free end (arc then straight, straight then arc, arc, straight) and the transition curve out of a curved neighbour in editor_track; joining and laying through points share the eased ends, the room check and the assembly of the pieces instead of two copies
2026-10-11 22:09:53 +02:00
maj00r
c5ac698702
refactor(editor): split the track mode into its gizmo, kept records, switch drive, switch slide and track bed files; path geometry shared in editorGeometry instead of four copies of the reversed path, track shape rules (stretching, rolls at joints, middle, switch axis, drive spot) in editor_track, fitting the track to the ground in ground_follow with the terrain query passed in, the record layer and the switch classification in the stores; long gizmo, record watch and switch slide functions broken up, out-parameters replaced by optional results
2026-10-11 22:03:59 +02:00
maj00r
3b503ede0c
fix(editor): the route design keeps its whole fragment after Apply: the last path of the line is the one holding the last piece, not the original end path holding the first piece of its group, so a second Apply (e.g. after changing the share of a compound curve) no longer re-lays only the front part and leaves the old tail lying next to the new paths; the same for the curve laid with the straight tool
2026-10-11 21:33:28 +02:00
maj00r
11aa67378d
feat(editor): the drawn tracks kept in the scenery as //$h lines as they are drawn: laying, pulling out of a free end, joining two ends and the parallel track record the whole line they belong to, its straights, arcs and transition curves, with the radii from the chord and the turn of the arcs and the transitions from the turn they make, in the same undo step; the curves read in the route window and the Curve tab are what the paths are, no transitions or cant made up for them; a curve ends at the point of reverse; a parallel arc is concentric with its source; the paths laid in pieces of up to 90 degrees match the kept design within their own approximation; 'Keep the line as it lies' for lines drawn before; self-test commands digitize and parallel; Polish translation
2026-10-11 21:33:28 +02:00
maj00r
0bfb8a4e7c
feat(editor): switches kept in the scenery as //$r lines: type (Rz, arc Rlj/Rld, slip Rkpd), rail, R, 1:n, side, a, b, R of the main track, the parts of a slip, km and number, catalogue or measured; recorded as they are placed on a straight, in a curve (one-sided when diverging to the side the curve turns to), as a double slip, and when their geometry is replaced or flipped; the switch panel shows the kept type and the R of the diverging track bent with the main one, with the number, rail and km to edit (km from the kept horizontal alignment); the speed check of a diverging track takes its R from the kept type; records follow renamed switches and go with removed ones on save; editor records stay out of the terrain files (.txtf), and those written there by hand go with them into .btf; the side of the diverging track shown as seen; self-test commands for placing switches, the kept switches and the .btf conversion; Polish translation
2026-10-11 21:33:27 +02:00
maj00r
572daeb274
feat(editor): the horizontal alignment designed in the route design kept in the scenery as //$h lines: its vertices and the elements they make (straight, transition, arc, with the radius at the start and the end and the cant), so the paths laid by it are known again without guessing from their curvature; a curve read from the paths takes the radius, the transitions, the cant and the compound arcs of the kept design when its paths lie on it within 2 cm, the other way round too; the whole line design taken back when the fragment has its ends; a curve redesigned alone taken into the line it belongs to; km of the start kept with the design and carried on to the vertical profile of the same paths; paths which no longer follow the kept design shown in the route window, with the kept design to take or to forget; self-test commands for the route design and the kept alignments; Polish translation
2026-10-11 21:33:27 +02:00
maj00r
c722e4e419
fix(editor): the gizmo keeps the diverging path of a switch on the surface of its main path
...
The diverging path p3-p4 takes its heights, grades at the ends and cant from the main path p1-p2 (the cone of
its cant) after every gizmo change: grade and cant rings, moving an end and editing a control vector. The tracks
joined to it follow its ends and grades. The grade ring measures along the main path and the gizmo stands in its
middle; the start vector of the diverging path slides along the main one and turns with it.
2026-10-11 21:33:27 +02:00
maj00r
a756beb34b
feat(editor): track gizmo rings along the track: direction, grade and cant
...
The rotate gizmo stands along the track. The cross ring changes the grade about the middle or the selected
end, the joined tracks take the grade at the joints; the ring along the track changes the cant of the track
or of the selected end, the joined tracks take it at the joints and ramp it. On a control vector the cross
ring tilts it up or down. Ctrl steps by 5 degrees, 1 per mille, 5 mm.
2026-10-11 21:33:27 +02:00
maj00r
89678ead3e
feat(editor): track gizmo turns, lengthens and edits the control vectors, joined tracks keep the tangent
...
W turns the track (about its middle or the selected end) and a selection of tracks, the joined tracks follow.
E lengthens the track at its free end: a straight stays straight, an arc keeps its radius, cant and grade.
The gizmo on a control point moves, turns or lengthens the vector; the control point of the track joined
there turns with it, at a switch the vector only slides along the switch. Straight neighbours dragged along
keep their tangents and become straight again when nothing bent them.
2026-10-11 21:33:27 +02:00
maj00r
24923dd472
feat(editor): track editor driven by what the cursor is over: the outline and a label show what a click or a drag does, snapping to free ends on the screen, handles and ends dragged directly, no rotation gizmo; laying from a free end the same in every mode, straight with Shift, the curve of a switch going on past its diverging end; height 0 where there's no terrain; placed switch leaves the switch mode, double slips listed apart, a drive of the switch placed with it by the //$e switch description of its template; compound curves of any number of radii; dragged end of a straight fits the curve beside it; name of a path, followed by the memory cells and the includes taking it; turntable placed from a template described as one, tracks led out of it and the tracks around fitted to it, its positions written to the include; infrastructure bound to the path whose events read its memory cell; terrain made where the route has none and shaped to the formation under the ballast; models along the track over the selected path and on along the joined ones while dragged, rarely used settings folded; vehicles and trainsets placed on any path, switches included, facing the way the arrow shows; joined paths spread into the selection; New scenery in the File menu starts the editor again with the wizard; ortho zoom towards the cursor; scripted self tests; Polish translation
2026-10-06 22:19:54 +02:00
maj00r
b07050fa52
feat(tracks): switches keep their neighbours joined on replacing, flipping and moving; events copied on splitting; circuits, overhead line, sleepers and events of the paths; curve design through the switches of a line; changes in files included more than once or with parameters reported instead of written; split of a straight at the point found, not a share of its length
2026-10-05 01:21:11 +02:00
maj00r
b0c363b586
feat: structure gauge along the line of the selected path in the OpenGL view
2026-10-04 01:27:41 +02:00
maj00r
c85a52d5b1
refactor(editor): track observer instead of the function hooks
2026-10-04 00:37:26 +02:00
maj00r
7b8d809078
refactor(editor): drop unused editor state and vertical leftovers of the route design
2026-10-04 00:35:40 +02:00
maj00r
e5c91d8a1a
refactor(editor): shared plan geometry and formatting helpers
2026-10-04 00:33:44 +02:00
maj00r
8778353b22
feat(editor): infrastructure bound to the paths follows their changes
2026-10-04 00:14:03 +02:00
maj00r
7371b18910
feat(editor): vertical profile editor, grade lines kept in the scenery
2026-10-04 00:14:03 +02:00
maj00r
cdd5c242d1
feat(editor): curves take over the adjoining straights
2026-10-04 00:14:03 +02:00
maj00r
55fd0c74bd
feat(editor): insert double slip at crossing
2026-10-03 02:41:34 +02:00
maj00r
a9e63e9496
fix(editor): fix: zero-vector curves detection
2026-10-03 02:41:34 +02:00
maj00r
de5f2069f7
feat(editor): dragging straight refits neighbor curves
2026-10-03 02:41:34 +02:00
maj00r
bf24c3983a
feat(editor): no sub-metre straights, switches snap, K splits path
2026-10-03 02:41:34 +02:00
maj00r
40422aec30
feat(editor): compound curves with dual radii and transition
2026-10-03 02:41:34 +02:00
maj00r
1985758a86
feat(editor): insert switches by dragging, paths from free ends
2026-10-03 02:41:34 +02:00
maj00r
32798a32bb
feat(editor): switch templates, auto distances with snapping
2026-10-03 02:41:34 +02:00
maj00r
a392364f06
feat(editor): curves over 180°, click to load curve
2026-10-03 02:41:34 +02:00
maj00r
b986cc8990
feat(editor): move straights keeping parallel
2026-10-03 02:41:34 +02:00
maj00r
9198840d0f
feat(editor): straights include switches, drag to edit
2026-10-03 02:41:34 +02:00
maj00r
b19f3de0d4
feat(editor): recognize collinear straights, measure
2026-10-03 02:41:34 +02:00
maj00r
7ede96df5f
chore(editor): cleanup comments
2026-10-03 02:41:34 +02:00
maj00r
8f2a34b3cf
feat(editor): route design with curves and transitions
2026-10-03 02:41:34 +02:00
maj00r
b93c5dde60
feat(editor): edit tracks loaded from the scenery
2026-10-03 02:41:34 +02:00
