8 Commits

Author	SHA1	Message	Date
maj00r	8375891c41	feat(editor): the selftest fastentour, the camera over each cell of a grid with switches or crossings laying timbers in turn, for a fastencheck of the whole scenery after it	2026-10-24 02:19:06 +02:00
maj00r	540dae420f	fix(sleepers): the timbers a switch shares with a track with no model of timbers of its own laid of the model of the switch, not of the one of eu07.ini without the fastenings: the model of a track with none of its own that of the tracks most of its timbers carry with one, and a timber carrying none of them, as under the short tracks between the halves of a slip, of the model of the nearest timber with one up to 1.5 m away; the fastenings and checkseats selftests take the model the same way	2026-10-24 02:18:58 +02:00
maj00r	2e00619d7f	feat(sleepers): the crossings at wide angles laid on timbers: where two tracks cross so wide they're laid as a grid, the one track carries timbers square to it through the crossing, two side by side under each rail of the other, which lays none there; the rail running along the two held on their seam by fastenings as far apart as the beams at most, clear of the fastenings of the rails across; the guard rails of the crossings at wide and middle angles held as the rails beside are, a running rail with its guard rail in the fastening of both, the rails crowding at the corners under one plate; the beams under the guard rails timbers as far as the guard rails reach; the fastenings selftest lists the rails on each timber with detail rails	2026-10-23 23:37:28 +02:00
maj00r	997a8da41d	fix(rails): the rail going on from the heel of a blade raised as the blade at the heel and forged down to the plain rail along 0.5 m, no step at the heel; the wing rails made over into the low section by a share of their own along them, the rise apart from it; a fastening holding raised rails, as the plate of a frog under the wing rails and the nose, moved up on a pad as far as the least raised of them, its clips with them, a rail not raised sunk in it, a rail raised more on a pad of its own on it; the fastenings selftest lists the lifts and the pads	2026-10-23 22:00:11 +02:00
maj00r	fa62a61389	fix(sleepers): no rail left lying on a timber without a fastening: the stock rails on a plate as wide as their foot between the brace and the slide plate, the stock rails back to back, as the wing rails of the slips with the blades outside of the diamond, on one plate under both; three rails or more close beside one another under fastenings of two rails in turn; a plate lying over the fastening of the rail beside cut short at its edge, as on one plate with it, a rail with its check rail on the fastening of the rail beside in such a plate, not left out; selftests checkseats and the bare rails in fastencheck	2026-10-23 18:25:00 +02:00
maj00r	b512460fdf	feat(sleepers): the fastenings fitted on the switches crossing and the double ones: the chair of the model split into its brace and its slide plate, the slide plate from the edge of the foot of the stock rail on, not under it; the plates and the slide plates narrowed where the rails lie close, the fastening of two rails centred between them, a rail lying on the fastening of the rail beside it left without one of its own, the brace dropped where the rail beside comes too close; selftest fastencheck	2026-10-23 17:25:02 +02:00
maj00r	5aedbcdc1b	feat(sleepers): the timbers of a switch get the fastenings of the rails from the submodels plate, chair and check of their model: a plate under each rail where it lies on a timber, slide chairs under the stock rails along the blades, a fastening of both where a check rail or another rail of the frog lies close beside, the legs of the nose in one plate where they're joined; the rails sit on the plate, the blades ride on the slide plates of the chairs as high as the model has them, their webs shortened; the fastenings drawn within 120 m; selftest fastenings	2026-10-23 16:46:58 +02:00
maj00r	4912199bd1	refactor(editor): the self-test commands in a file per group instead of one file of 4200 lines ... editormodeselftest.cpp keeps the dispatch, the list of the commands and the step; the groups go to editormodeselftest{scene,sleepers,sweep,track,switch,join,signal,terrain,rails}.cpp, the sleeper commands (beams, sharedzones, sleepersbg, beamsnear, sleepercheck) in a group of their own; the frame count and one_line shared through editormodeselftest.h. The output of geomhash, sleepercheck, wings, space, guards, crossings and switches is the same on the seven sceneries of the regression.	2026-10-18 02:18:36 +02:00