13 Commits

Author	SHA1	Message	Date
maj00r	f36fa81fd1	fix(sleepers): the fastenings of the rails at the obtuse crossings of the slips: the rails and check rails along a timber each with its foot over the foot of the one beside, with a check rail between two of them, in one fastening stretched under them all, a check rail where a rail lies being that rail; of the rails close beside one another, as of a frog, two in a fastening of both only where its ends reach them both, else each in a plate of its own; a check rail on a fastening holding all the rails over it seated for the checkseats selftest	2026-10-24 02:19:03 +02:00
maj00r	540dae420f	fix(sleepers): the timbers a switch shares with a track with no model of timbers of its own laid of the model of the switch, not of the one of eu07.ini without the fastenings: the model of a track with none of its own that of the tracks most of its timbers carry with one, and a timber carrying none of them, as under the short tracks between the halves of a slip, of the model of the nearest timber with one up to 1.5 m away; the fastenings and checkseats selftests take the model the same way	2026-10-24 02:18:58 +02:00
maj00r	f155956669	perf(sleepers): the rails of each track for the fastenings worked out once and kept until its geometry is made again, it goes far or the crossings change, not again for every track laid around it; the fastenings laid only out to 30 m past where they're drawn, the tracks further out keeping their beams to lay them on as they come near; out past 50 m the tracks laid while the laying in a frame took under 2 ms, the rest in the frames after	2026-10-24 00:23:50 +02:00
maj00r	2e00619d7f	feat(sleepers): the crossings at wide angles laid on timbers: where two tracks cross so wide they're laid as a grid, the one track carries timbers square to it through the crossing, two side by side under each rail of the other, which lays none there; the rail running along the two held on their seam by fastenings as far apart as the beams at most, clear of the fastenings of the rails across; the guard rails of the crossings at wide and middle angles held as the rails beside are, a running rail with its guard rail in the fastening of both, the rails crowding at the corners under one plate; the beams under the guard rails timbers as far as the guard rails reach; the fastenings selftest lists the rails on each timber with detail rails	2026-10-23 23:37:28 +02:00
maj00r	997a8da41d	fix(rails): the rail going on from the heel of a blade raised as the blade at the heel and forged down to the plain rail along 0.5 m, no step at the heel; the wing rails made over into the low section by a share of their own along them, the rise apart from it; a fastening holding raised rails, as the plate of a frog under the wing rails and the nose, moved up on a pad as far as the least raised of them, its clips with them, a rail not raised sunk in it, a rail raised more on a pad of its own on it; the fastenings selftest lists the lifts and the pads	2026-10-23 22:00:11 +02:00
maj00r	0513a92bc3	fix(sleepers): the fastening of the rails of a frog, holding more of them than its seats, stretched under them all as the plate of the frog, its ends with the clips past the feet of the wing rails, short of the feet of the rails beside, and not narrowed then; the wing rails no longer lying off its ends with no clip	2026-10-23 21:19:14 +02:00
maj00r	d3aef50257	feat(rails): the wing rails of the frogs of the low section of the blades, as Zu1-60, where the timbers have slide chairs: from 1.5 m before the throat to their ends the foot raised as much as the blades ride, the web shortened, the heads level with the rails beside, forged down to the plain rail along 0.5 m; a wing rail which is the stock rail of a blade too, as in the slips with the blades outside of the diamond, whole along its chairs; the fastening holding only rails raised as much moved up on a pad as wide as it, a raised rail on a fastening with others on a pad of its own	2026-10-23 20:21:13 +02:00
maj00r	153cdc550c	fix(sleepers): the fastenings of a rail part between two carved cuts where the part is laid, not twice as far out: both cuts carry its carved lines, taken once as the rails are laid, by one rule for both	2026-10-23 19:39:07 +02:00
maj00r	f7821eea99	fix(sleepers): the wing rails on the timbers as they're bent out: the rails of a track taken in their parts between the cuts at the crossings, as they're laid, a part going on over the gap at an obtuse crossing where its check rail lies; three rails or more close beside held by the fastening of two rails covering the most of them first, then those before and after it, one holding more rails than its seats not narrowed; a rail lying on the brace of a chair beside takes the brace away; a plate cut short at the fastening beside from where its narrowing left it	2026-10-23 19:24:47 +02:00
maj00r	fa62a61389	fix(sleepers): no rail left lying on a timber without a fastening: the stock rails on a plate as wide as their foot between the brace and the slide plate, the stock rails back to back, as the wing rails of the slips with the blades outside of the diamond, on one plate under both; three rails or more close beside one another under fastenings of two rails in turn; a plate lying over the fastening of the rail beside cut short at its edge, as on one plate with it, a rail with its check rail on the fastening of the rail beside in such a plate, not left out; selftests checkseats and the bare rails in fastencheck	2026-10-23 18:25:00 +02:00
maj00r	62f8932f15	fix(sleepers): a rail with its check rail on the side away from a rail close beside, as the outer rails at the acute crossings of the slips with the blades outside of the diamond, in the fastening with its check rail, the rail beside in a plate of its own; a plate still lying over a fastening of more than a plate after the narrowing left out	2026-10-23 17:44:35 +02:00
maj00r	b512460fdf	feat(sleepers): the fastenings fitted on the switches crossing and the double ones: the chair of the model split into its brace and its slide plate, the slide plate from the edge of the foot of the stock rail on, not under it; the plates and the slide plates narrowed where the rails lie close, the fastening of two rails centred between them, a rail lying on the fastening of the rail beside it left without one of its own, the brace dropped where the rail beside comes too close; selftest fastencheck	2026-10-23 17:25:02 +02:00
maj00r	5aedbcdc1b	feat(sleepers): the timbers of a switch get the fastenings of the rails from the submodels plate, chair and check of their model: a plate under each rail where it lies on a timber, slide chairs under the stock rails along the blades, a fastening of both where a check rail or another rail of the frog lies close beside, the legs of the nose in one plate where they're joined; the rails sit on the plate, the blades ride on the slide plates of the chairs as high as the model has them, their webs shortened; the fastenings drawn within 120 m; selftest fastenings	2026-10-23 16:46:58 +02:00