maszyna

Curve.h

Reorganize source files into logical subdirectories

2026-03-14 19:01:57 +00:00

Event.cpp

feat(scenery): models laid along curves (sweep nodes), bent to follow the paths or repeated along them, loaded and saved with the scenery; trainsets put on a path while the simulation runs; trainset turned around by reversed after its header: the first vehicle stays at the offset and leads towards point 1, the rest stands behind it; launcher keeps reversed trainsets and can turn one around; memory cells saved with the new name of the path they name; events tell their targets and the events of a multiple event; renderer tells whether the cursor is over a surface; vehicle placed in the editor entered when the driving goes on

2026-10-06 22:19:32 +02:00

Event.h

feat(scenery): models laid along curves (sweep nodes), bent to follow the paths or repeated along them, loaded and saved with the scenery; trainsets put on a path while the simulation runs; trainset turned around by reversed after its header: the first vehicle stays at the offset and leads towards point 1, the rest stands behind it; launcher keeps reversed trainsets and can turn one around; memory cells saved with the new name of the path they name; events tell their targets and the events of a multiple event; renderer tells whether the cursor is over a surface; vehicle placed in the editor entered when the driving goes on

2026-10-06 22:19:32 +02:00

EvLaunch.cpp

Fix/sonar maintainability rebased (#209 )

2026-10-11 13:22:33 +02:00

EvLaunch.h

Fix/sonar maintainability rebased (#209 )

2026-10-11 13:22:33 +02:00

GaugeLine.cpp

refactor(track): the rail code is split by concern into gauge lines, crossings and check rails, rail materials, rail profile measuring, planning the cuts and laying the geometry, instead of one TrackRails.cpp; rail_offset reuses nearest_distance and lateral; TTrack::rail_dimensions measures the profile through track_rails::measure_rail

2026-10-17 23:29:08 +02:00

GaugeLine.h

refactor(track): the rail code is split by concern into gauge lines, crossings and check rails, rail materials, rail profile measuring, planning the cuts and laying the geometry, instead of one TrackRails.cpp; rail_offset reuses nearest_distance and lateral; TTrack::rail_dimensions measures the profile through track_rails::measure_rail

2026-10-17 23:29:08 +02:00

Knots.h

refactor(track): a lofted rail span is described by one loft_span value instead of twenty arguments, and the knot line helpers (sample, bound, meetings, middle, shifted) live once in world/Knots.h instead of in lambdas of the segment and of lay_rail

2026-10-17 23:28:42 +02:00

MemCell.cpp

Fix/sonar maintainability rebased (#209 )

2026-10-11 13:22:33 +02:00

MemCell.h

Fix/sonar maintainability rebased (#209 )

2026-10-11 13:22:33 +02:00

mtable.cpp

Fix/sonar maintainability rebased (#209 )

2026-10-11 13:22:33 +02:00

mtable.h

Fix/sonar maintainability rebased (#209 )

2026-10-11 13:22:33 +02:00

RailCrossings.cpp

fix(track): the tip of a blade lying tangent to its stock rail, as in 60E1 and 49E1 switches with cut tips, is where its theoretical arc gets 5 mm off the gauge face of the stock rail less the 125 mm the nose is planed over, instead of where it gets 3 mm off, so the tips lie 1.25, 1.60, 2.11, 2.63 and 3.34 m from the start of the switch at R190, 300, 500, 760 and 1200 as in the tables of these switches instead of 0.2 to 0.65 m nearer it; blades cutting into the stock rail at an angle, as in S42 switches, keep their tips

2026-10-17 23:32:43 +02:00

RailLayer.cpp

feat(track): a check rail is held to its running rail by spacer blocks every 0.5 m along its straight part, laid in the same way as the spacers of a guard rail at a wide crossing, below the head from the web of the running rail to the face of the check rail, so the flangeway stays open above them; a check rail replaced by a wing rail gets none; the spacing of spacers and castings is shared by guard rails and check rails

2026-10-17 23:29:08 +02:00

RailLayout.h

fix(track): the tip of a blade lying tangent to its stock rail, as in 60E1 and 49E1 switches with cut tips, is where its theoretical arc gets 5 mm off the gauge face of the stock rail less the 125 mm the nose is planed over, instead of where it gets 3 mm off, so the tips lie 1.25, 1.60, 2.11, 2.63 and 3.34 m from the start of the switch at R190, 300, 500, 760 and 1200 as in the tables of these switches instead of 0.2 to 0.65 m nearer it; blades cutting into the stock rail at an angle, as in S42 switches, keep their tips

2026-10-17 23:32:43 +02:00

RailMaterials.cpp

refactor(track): the plates, fillers and check rails of a rail drawing are made from one box_profile and one helper for both sides, and the colour of a tread is sampled by sample_dds and sample_image into one colour_mean, a block of a DXT texture decoded by add_dxt_block, instead of one function

2026-10-17 23:29:08 +02:00

RailPlan.cpp

feat(track): a check rail is held to its running rail by spacer blocks every 0.5 m along its straight part, laid in the same way as the spacers of a guard rail at a wide crossing, below the head from the web of the running rail to the face of the check rail, so the flangeway stays open above them; a check rail replaced by a wing rail gets none; the spacing of spacers and castings is shared by guard rails and check rails

2026-10-17 23:29:08 +02:00

RailProfile.cpp

feat(track): at a crossing at a wide angle every head of one track meets every head of the other in a mitre from the corner of their flangeways to the far corner of the heads, the way the corners of a cast diamond look, so the running rails and guard rails of both tracks form closed corners and only the flangeways stay open, instead of the rails of one track going through and the other ones glued to their sides; corner_cut gives the mitres, as bends of the running rails and as miters of the guard rails; the fit of a loft end to the profile of another rail and the field and gauge outlines of the rail profile are gone with the gluing

2026-10-17 23:29:08 +02:00

Road.cpp

feat(roads): lanes change within a road piece (lanesto), junctions of two roads from earlier sceneries are loaded as such pieces and saved as roads; the editor leads the lanes of neighbouring pieces with them

2026-10-04 05:00:52 +02:00

Road.h

feat(roads): lanes change within a road piece (lanesto), junctions of two roads from earlier sceneries are loaded as such pieces and saved as roads; the editor leads the lanes of neighbouring pieces with them

2026-10-04 05:00:52 +02:00

RoadOrder.h

feat(roads): right of way and lane turns at junctions, road weights, kerbs, medians and forking roads, banks to the ground, roundabouts, pedestrian crossings, spawn sets by count; fix(editor): model skin export, placement on the ground under the orthophoto

2026-10-04 01:55:35 +02:00

RoadPoint.cpp

feat(roads): lanes change within a road piece (lanesto), junctions of two roads from earlier sceneries are loaded as such pieces and saved as roads; the editor leads the lanes of neighbouring pieces with them

2026-10-04 05:00:52 +02:00

RoadPoint.h

feat(roads): right of way and lane turns at junctions, road weights, kerbs, medians and forking roads, banks to the ground, roundabouts, pedestrian crossings, spawn sets by count; fix(editor): model skin export, placement on the ground under the orthophoto

2026-10-04 01:55:35 +02:00

Segment.cpp

merge feat/rail-crossings: the split rail code, mitred wide crossings, guard rail treads, check rail spacers and frogs for every rail profile, with the geometric switch blades moved into RailCrossings, their shape in track_rails::switch_blade and the lowering of the head in loft_span

2026-10-17 23:32:43 +02:00

Segment.h

merge feat/rail-crossings: the split rail code, mitred wide crossings, guard rail treads, check rail spacers and frogs for every rail profile, with the geometric switch blades moved into RailCrossings, their shape in track_rails::switch_blade and the lowering of the head in loft_span

2026-10-17 23:32:43 +02:00

Spring.cpp

Fix/sonar maintainability rebased (#209 )

2026-10-11 13:22:33 +02:00

Spring.h

Fix/sonar maintainability rebased (#209 )

2026-10-11 13:22:33 +02:00

station.cpp

Fix/sonar maintainability rebased (#209 )

2026-10-11 13:22:33 +02:00

station.h

Fix/sonar maintainability rebased (#209 )

2026-10-11 13:22:33 +02:00

Sweep.cpp

fix(sweep): local named near renamed, MSVC takes near for the empty macro of windows.h and fails on the syntax

2026-10-08 08:51:06 +02:00

Sweep.h

feat(editor): platform edge put 1.725, 1.675 or 1.650 m from the axis of the track as chosen, kept in the editor settings; models along a track set back by the gauge of the other path of each switch whose points their line passes, also when they stand by the plain track ahead of the switch or by its straight path, the widening led in from the tracks beyond the diverging path; the line beyond the ends of a sweep goes on along the straightest path

2026-10-08 01:12:30 +02:00

Track.cpp

merge feat/rail-crossings: the split rail code, mitred wide crossings, guard rail treads, check rail spacers and frogs for every rail profile, with the geometric switch blades moved into RailCrossings, their shape in track_rails::switch_blade and the lowering of the head in loft_span

2026-10-17 23:32:43 +02:00

Track.h

merge feat/rail-crossings: the split rail code, mitred wide crossings, guard rail treads, check rail spacers and frogs for every rail profile, with the geometric switch blades moved into RailCrossings, their shape in track_rails::switch_blade and the lowering of the head in loft_span

2026-10-17 23:32:43 +02:00

TrackRails.h

merge feat/rail-crossings: the split rail code, mitred wide crossings, guard rail treads, check rail spacers and frogs for every rail profile, with the geometric switch blades moved into RailCrossings, their shape in track_rails::switch_blade and the lowering of the head in loft_span

2026-10-17 23:32:43 +02:00

Traction.cpp

Fix/sonar maintainability rebased (#209 )

2026-10-11 13:22:33 +02:00

Traction.h

Fix/sonar maintainability rebased (#209 )

2026-10-11 13:22:33 +02:00

TractionPower.cpp

Fix/sonar maintainability rebased (#209 )

2026-10-11 13:22:33 +02:00

TractionPower.h

Fix/sonar maintainability rebased (#209 )

2026-10-11 13:22:33 +02:00

TrkFoll.cpp

fix(vehicles): vehicle placed with a switch as its first path no longer reads the direction of a previous path it doesn't have; vehicle put back on the track keeps the direction of its axles

2026-10-06 22:19:12 +02:00

TrkFoll.h

Remove not needed casts, variables and switch from double precission to float precission for some angle vectors

2026-04-28 00:51:17 +02:00