mirror of
https://github.com/MaSzyna-EU07/maszyna.git
synced 2026-11-19 22:44:59 +01:00
* fix(ai): shunting AI brakes for a stop point again, the braking curve doesn't plan from a brake table left at zero The braking curve outside the final approach plans from the consist brake table sincece87aa0e(#187, merged with #264) whenever the brake is pneumatic. That table is worked out only for train running (Obey_train, Bank); in shunting it stays at zero, the planned full braking falls to its floor of 0.01 m/s2, and the demand comes out at a few hundredths of a m/s2, above the shunting brake threshold of -0.2. A shunting engine then rolled on without braking until the final approach, too late, and ran through the signal it was to stop at (seed 480873929 of l053_poranek: ep07p-2003 at sandomierz_g4_sem_info, sm42-1096, et22-654). With no worked out table the curve is again the constant deceleration over the distance left, as it was beforece87aa0eand as #187 meant to keep it for shunting. Train running is unchanged. The curve moves out of TController into vehicle/brakingcurve.{h,cpp} so that it is unit tested: tests/unit/test_braking_curve.cpp checks a shunting engine braking to a stop point with the zeroed table, and that a train with a worked out table gets the same demand as before. * test(ai): pin the train braking-curve demand to the results of the code before the move A brake table that grips harder as the train slows and a gradient, so that a wrong gravity sign, table index or a dropped term in the shaped demand shows; the expected values were worked out with the code removed from TController::adjust_desired_speed_for_braking_curve. * fix(test): a train set across a signal doesn't pass it at danger the moment the AI first looks at it The speed table takes in events up to a train length behind the head, so a signal the train stands across at the start of a scenario is found already behind the head, becomes elapsed on its first update, and the test mode reported it as passed at danger (calkowo_lotos: st43-189 at mac_daleko3_sem_info, manewrowo3: st43-100 at suw_szopa_a02_sem_info, both at 13.6 s with the train at a stand, the signal 20 m behind the head). A point now counts as passed only when the head of the train had it ahead once; the blackbox record of passed signals follows the same rule. * fix(test): a signal found up to 5 m behind the head still counts as seen ahead The distance to an event is found in steps of a metre from the position of its memory cell, so a signal just ahead of the head (a train stopped short of it when the autopilot takes over, or set right at it at the start) could come out slightly behind it, and passing it would not be reported. The trains set across a signal that the previous commit is about stood 20 m past it. Still not reported: a signal crossed while the speed table is being traced anew in motion (a Timetable: command to a running train, the autopilot taking over in motion), as it is found behind the head when the trace is made. * docs(test): say what the seen-ahead tolerance gives up A train set less than 5 m past a signal at stop is still reported to pass it at danger: standing that close it can't be told from a train stopped just short of the signal, which the tolerance is there for. --------- Co-authored-by: maj00r <maj00r@host>
900 lines
31 KiB
CMake
900 lines
31 KiB
CMake
cmake_minimum_required(VERSION 3.26)
|
|
if(POLICY CMP0058)
|
|
cmake_policy(SET CMP0058 NEW)
|
|
endif()
|
|
if(POLICY CMP0074)
|
|
cmake_policy(SET CMP0074 NEW)
|
|
endif()
|
|
if(POLICY CMP0069)
|
|
cmake_policy(SET CMP0069 NEW)
|
|
endif()
|
|
|
|
include(CheckCXXSymbolExists)
|
|
|
|
set(CMAKE_FIND_PACKAGE_PREFER_CONFIG TRUE)
|
|
set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} "${CMAKE_SOURCE_DIR}/CMake_modules/")
|
|
|
|
set(DEPS_DIR ${DEPS_DIR} "${CMAKE_CURRENT_SOURCE_DIR}/ref")
|
|
project("eu07")
|
|
|
|
#set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -fsanitize=address -fsanitize=undefined")
|
|
#set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fsanitize=address -fsanitize=undefined -Wformat")
|
|
#set(CMAKE_LD_FLAGS "${CMAKE_LD_FLAGS} -fsanitize=address -fsanitize=undefined")
|
|
|
|
string(TIMESTAMP VERSION_YEAR "%y")
|
|
string(TIMESTAMP VERSION_MONTH "%m")
|
|
string(TIMESTAMP VERSION_DAY "%d")
|
|
|
|
# Use these as version numbers
|
|
set(VERSION_MAJOR ${VERSION_YEAR})
|
|
set(VERSION_MINOR ${VERSION_MONTH})
|
|
set(VERSION_PATCH ${VERSION_DAY})
|
|
|
|
set(VERSION_STRING "${VERSION_YEAR}.${VERSION_MONTH}.${VERSION_DAY}")
|
|
|
|
|
|
set(CMAKE_CXX_STANDARD 20)
|
|
|
|
file(GLOB HEADERS "*.h"
|
|
"Console/*.h"
|
|
"McZapkie/*.h"
|
|
"gl/*.h"
|
|
"network/*.h"
|
|
"vr/*.h"
|
|
"network/backend/*.h"
|
|
"widgets/*.h"
|
|
"launcher/*.h"
|
|
"extras/*.h"
|
|
"global_include/*.h"
|
|
"simulation/*.h"
|
|
"scene/*.h"
|
|
"rendering/*.h"
|
|
"audio/*.h"
|
|
"environment/*.h"
|
|
"application/*.h"
|
|
"input/*.h"
|
|
"scripting/*.h"
|
|
"model/*.h"
|
|
"utilities/*.h"
|
|
"world/*.h"
|
|
"vehicle/*.h")
|
|
|
|
set(GLOBAL_ROOT_DIR "${CMAKE_CURRENT_SOURCE_DIR}")
|
|
set(GLOBAL_INCLUDE_DIR "${CMAKE_CURRENT_SOURCE_DIR}/global_include")
|
|
set(IMGUI_DIR "${CMAKE_CURRENT_SOURCE_DIR}/imgui")
|
|
|
|
if (APPLE)
|
|
set (CMAKE_FIND_FRAMEWORK LAST)
|
|
endif()
|
|
|
|
option(WITH_OPENGL_MODERN "Compile with OpenGL modern renderer" ON)
|
|
option(WITH_OPENGL_LEGACY "Compile with OpenGL legacy renderer" ON)
|
|
option(WITH_PYTHON "Python 3.14 embedded scripting" ON)
|
|
option(WITH_UART "Compile with libserialport" ON)
|
|
option(WITH_LUA "Compile with lua scripting support" ON)
|
|
option(WITH_WASM "WebAssembly script screens (wasmscreen:, wasmdestinationsign:), run by the WAMR interpreter in ref/wamr" ON)
|
|
option(WITH_OPENVR "Compile with OpenVR" OFF)
|
|
option(WITH_ZMQ "Compile with cppzmq" OFF)
|
|
option(WITH_CRASHPAD "Compile with crashpad" OFF)
|
|
option(WITH_DISCORD_RPC "Compile with DISCORD RICH PRESENCE" ON)
|
|
option(USE_LTO "Use link-time optimization" OFF)
|
|
option(WITH_TESTS "Build and run the unit tests with the game, a failing test fails the build" ON)
|
|
option(WITH_EDITOR_SELFTESTS "Run the scripts of the editor and launcher self-tests named by the EU07_EDITOR_SELFTEST and EU07_LAUNCHER_SELFTEST variables" OFF)
|
|
option(WITH_BETTER_RENDERER "Experimental multi-backend renderer based on NVRHI" OFF)
|
|
option(GENERATE_PDB "Generate executable with program debugging symbols" ON)
|
|
option(ENABLE_MCC "Enable multicore compilation" ON)
|
|
option(WITHDUMPGEN "Enable generating DMP files on crash" ON)
|
|
option(ENABLE_AVX2 "Enable AVX2 instruction set (requires AVX2-capable CPU, Haswell/2013 or newer)" ON)
|
|
option(ADD_VERSION_SUFFIX "Add date and commit hash to the executable name" ON)
|
|
set(BUILD_EXAMPLES OFF CACHE BOOL "" FORCE)
|
|
|
|
# vcpkg init
|
|
set(VCPKG_ROOT "${CMAKE_CURRENT_SOURCE_DIR}/ref/vcpkg")
|
|
set(VCPKG_INSTALLED_PATH "${VCPKG_ROOT}/installed/x64-windows")
|
|
list(APPEND CMAKE_PREFIX_PATH "${VCPKG_INSTALLED_PATH}")
|
|
list(APPEND CMAKE_MODULE_PATH "${VCPKG_INSTALLED_PATH}/share")
|
|
|
|
set(SOURCES
|
|
"model/Texture.cpp"
|
|
"utilities/Timer.cpp"
|
|
"world/Track.cpp"
|
|
"world/TrackSleepers.cpp"
|
|
"world/SleeperPaths.cpp"
|
|
"world/SleeperFeatures.cpp"
|
|
"world/SleeperLines.cpp"
|
|
"world/SleeperLayout.cpp"
|
|
"world/SleeperModels.cpp"
|
|
"world/SleeperWorker.cpp"
|
|
"world/GaugeLine.cpp"
|
|
"world/RailCrossings.cpp"
|
|
"world/RailMaterials.cpp"
|
|
"world/RailProfile.cpp"
|
|
"world/RailPlan.cpp"
|
|
"world/RailCarve.cpp"
|
|
"world/RailLayer.cpp"
|
|
"world/TrackUneven.cpp"
|
|
"world/Road.cpp"
|
|
"world/Sweep.cpp"
|
|
"world/RoadPoint.cpp"
|
|
"world/Traction.cpp"
|
|
"world/TractionPower.cpp"
|
|
"vehicle/Train.cpp"
|
|
"world/TrkFoll.cpp"
|
|
"vehicle/AirCoupler.cpp"
|
|
"model/AnimModel.cpp"
|
|
"vehicle/Button.cpp"
|
|
"vehicle/Camera.cpp"
|
|
"vehicle/Driver.cpp"
|
|
"application/driverhints.cpp"
|
|
"vehicle/DynObj.cpp"
|
|
"EU07.cpp"
|
|
"export_e3d_standalone.cpp"
|
|
"export_btf_standalone.cpp"
|
|
"nodebank_previews_standalone.cpp"
|
|
"world/Event.cpp"
|
|
"world/EvLaunch.cpp"
|
|
"utilities/Float3d.cpp"
|
|
"vehicle/Gauge.cpp"
|
|
"utilities/Globals.cpp"
|
|
"utilities/Logs.cpp"
|
|
"model/MdlMngr.cpp"
|
|
"world/MemCell.cpp"
|
|
"model/Model3d.cpp"
|
|
"world/mtable.cpp"
|
|
"rendering/nullrenderer.cpp"
|
|
"rendering/renderer.cpp"
|
|
"model/ResourceManager.cpp"
|
|
"scene/sn_utils.cpp"
|
|
"world/Segment.cpp"
|
|
"environment/sky.cpp"
|
|
"environment/sun.cpp"
|
|
"environment/stars.cpp"
|
|
"rendering/lightarray.cpp"
|
|
"environment/skydome.cpp"
|
|
"audio/sound.cpp"
|
|
"world/Spring.cpp"
|
|
"rendering/frustum.cpp"
|
|
"application/uilayer.cpp"
|
|
"rendering/openglmatrixstack.cpp"
|
|
"environment/moon.cpp"
|
|
"input/command.cpp"
|
|
"input/keyboardinput.cpp"
|
|
"input/gamepadinput.cpp"
|
|
"input/drivermouseinput.cpp"
|
|
"utilities/translation.cpp"
|
|
"model/material.cpp"
|
|
"stdafx.cpp"
|
|
"input/messaging.cpp"
|
|
"scene/scene.cpp"
|
|
"scene/scenenode.cpp"
|
|
"simulation/simulation.cpp"
|
|
"simulation/blackboxrecorder.cpp"
|
|
"model/vertex.cpp"
|
|
"audio/audio.cpp"
|
|
"audio/audiorenderer.cpp"
|
|
"utilities/motiontelemetry.cpp"
|
|
"application/uitranscripts.cpp"
|
|
"world/station.cpp"
|
|
"application/application.cpp"
|
|
"simulation/simulationtime.cpp"
|
|
"simulation/simulationtest.cpp"
|
|
"scene/sceneeditor.cpp"
|
|
"rendering/screenshot.cpp"
|
|
"input/driverkeyboardinput.cpp"
|
|
"application/drivermode.cpp"
|
|
"application/driveruilayer.cpp"
|
|
"application/driveruipanels.cpp"
|
|
"input/editorkeyboardinput.cpp"
|
|
"editor/editorSettings.cpp"
|
|
"editor/editorModelSets.cpp"
|
|
"editor/editorTrackPresets.cpp"
|
|
"editor/editorIncludeInfo.cpp"
|
|
"editor/editorTerrain.cpp"
|
|
"editor/editorTrack.cpp"
|
|
"editor/editorTrackTrace.cpp"
|
|
"editor/editorFouling.cpp"
|
|
"editor/editorRoad.cpp"
|
|
"editor/editorAlignment.cpp"
|
|
"editor/editorTrackShape.cpp"
|
|
"editor/editorGroundFollow.cpp"
|
|
"editor/editorAlignmentStore.cpp"
|
|
"editor/editorSwitchStore.cpp"
|
|
"editor/editorSwitchCurve.cpp"
|
|
"editor/editorKilometrage.cpp"
|
|
"editor/editorStation.cpp"
|
|
"editor/editorSwitchDesign.cpp"
|
|
"editor/editorConnections.cpp"
|
|
"application/editormodeconnection.cpp"
|
|
"application/editormodeconnectioncurve.cpp"
|
|
"application/editormodedigitize.cpp"
|
|
"editor/editorSpeed.cpp"
|
|
"editor/editorProfile.cpp"
|
|
"editor/editorGauge.cpp"
|
|
"editor/editorInfra.cpp"
|
|
"editor/editorTerrainStreamer.cpp"
|
|
"editor/editorOrthophoto.cpp"
|
|
"editor/editorHttp.cpp"
|
|
"editor/editorNmt.cpp"
|
|
"editor/editorGeoMap.cpp"
|
|
"editor/editorPreviews.cpp"
|
|
"editor/editorIcons.cpp"
|
|
"editor/editorClips.cpp"
|
|
"application/editormode.cpp"
|
|
"application/editormodetrack.cpp"
|
|
"application/editormoderoute.cpp"
|
|
"application/editormodestraights.cpp"
|
|
"application/editormodelay.cpp"
|
|
"application/editormodeswitchplace.cpp"
|
|
"application/editormodetrackgizmo.cpp"
|
|
"application/editormoderecords.cpp"
|
|
"application/editormodeswitchdrive.cpp"
|
|
"application/editormodeswitchtool.cpp"
|
|
"application/editormodeswitchtemplate.cpp"
|
|
"application/editormodenmt.cpp"
|
|
"application/editormodegradeline.cpp"
|
|
"application/editormodeswitchslide.cpp"
|
|
"application/editormodeswitchdesign.cpp"
|
|
"application/editormodetrackbed.cpp"
|
|
"application/editormodetrackux.cpp"
|
|
"application/editormodetrackprops.cpp"
|
|
"application/editormoderoad.cpp"
|
|
"application/editormodeprofile.cpp"
|
|
"application/editormodetextures.cpp"
|
|
"application/editormodegauge.cpp"
|
|
"application/editormoderide.cpp"
|
|
"application/editormodeminimap.cpp"
|
|
"application/editormodeinfra.cpp"
|
|
"application/editormodespeed.cpp"
|
|
"application/editormodesrk.cpp"
|
|
"application/editormodekm.cpp"
|
|
"application/editormodejoints.cpp"
|
|
"application/editormodeparallel.cpp"
|
|
"application/editormodelineside.cpp"
|
|
"application/editormodevehicle.cpp"
|
|
"application/editormodeselection.cpp"
|
|
"application/editormodeviewport.cpp"
|
|
"application/editormodesignal.cpp"
|
|
"application/editormodesweep.cpp"
|
|
"application/editormodeturntable.cpp"
|
|
"application/editormodeselftest.cpp"
|
|
"application/editormodeselftestscene.cpp"
|
|
"application/editormodeselftestsleepers.cpp"
|
|
"application/editormodeselftestsweep.cpp"
|
|
"application/editormodeselftesttrack.cpp"
|
|
"application/editormodeselftestswitch.cpp"
|
|
"application/editormodeselftestjoin.cpp"
|
|
"application/editormodeselftestsignal.cpp"
|
|
"application/editormodeselftestterrain.cpp"
|
|
"application/editormodeselftestrails.cpp"
|
|
"application/editormodeselftestmonkey.cpp"
|
|
"application/scriptedinput.cpp"
|
|
"input/editormouseinput.cpp"
|
|
"application/editoruilayer.cpp"
|
|
"application/editoruipanels.cpp"
|
|
"application/scenarioloadermode.cpp"
|
|
"application/scenarioloaderuilayer.cpp"
|
|
"scene/scenenodegroups.cpp"
|
|
"scene/scenelayers.cpp"
|
|
"scene/scenelayerssave.cpp"
|
|
"scene/sceneterrain.cpp"
|
|
"scene/heightmapterrain.cpp"
|
|
"scene/scenemodelentries.cpp"
|
|
"simulation/simulationenvironment.cpp"
|
|
"simulation/simulationstateserializer.cpp"
|
|
"rendering/precipitation.cpp"
|
|
"scripting/pythonscreenviewer.cpp"
|
|
"utilities/dictionary.cpp"
|
|
"rendering/particles.cpp"
|
|
"utilities/headtrack.cpp"
|
|
"rendering/geometrybank.cpp"
|
|
"rendering/openglcolor.cpp"
|
|
"simulation/simulationsounds.cpp"
|
|
"rendering/openglcamera.cpp"
|
|
|
|
"network/network.cpp"
|
|
"network/message.cpp"
|
|
"network/manager.cpp"
|
|
"network/backend/asio.cpp"
|
|
|
|
"widgets/vehiclelist.cpp"
|
|
"widgets/map.cpp"
|
|
"widgets/map_objects.cpp"
|
|
"widgets/popup.cpp"
|
|
"widgets/time.cpp"
|
|
"widgets/vehicleparams.cpp"
|
|
"widgets/trainingcard.cpp"
|
|
"widgets/perfgraphs.cpp"
|
|
|
|
"${DEPS_DIR}/glad/src/glad.c"
|
|
"${DEPS_DIR}/dds-ktx/src/dds-ktx.c"
|
|
"${DEPS_DIR}/zstd/zstd.c"
|
|
|
|
"gl/shader.cpp"
|
|
"gl/vao.cpp"
|
|
"gl/ubo.cpp"
|
|
"gl/framebuffer.cpp"
|
|
"gl/renderbuffer.cpp"
|
|
"gl/postfx.cpp"
|
|
"gl/cubemap.cpp"
|
|
"gl/glsl_common.cpp"
|
|
"gl/buffer.cpp"
|
|
"gl/fence.cpp"
|
|
"gl/pbo.cpp"
|
|
"gl/query.cpp"
|
|
|
|
"imgui/imgui.cpp"
|
|
"imgui/imgui_demo.cpp"
|
|
"imgui/imgui_draw.cpp"
|
|
"imgui/imgui_widgets.cpp"
|
|
"imgui/imgui_tables.cpp"
|
|
"imgui/imgui_impl_glfw.cpp"
|
|
"imgui/ImGuizmo.cpp"
|
|
|
|
"stb/stb_image.c"
|
|
|
|
"launcher/launchermode.cpp"
|
|
"launcher/scenery_list.cpp"
|
|
"launcher/launcheruilayer.cpp"
|
|
"launcher/vehicle_picker.cpp"
|
|
"launcher/keymapper.cpp"
|
|
"launcher/textures_scanner.cpp"
|
|
"launcher/scenery_scanner.cpp"
|
|
"launcher/scenery_wizard.cpp"
|
|
|
|
"vr/vr_interface.cpp"
|
|
)
|
|
|
|
set(DEFINITIONS)
|
|
set(SOURCES ${SOURCES} "imgui/imgui_impl_opengl3.cpp")
|
|
set(SOURCES ${SOURCES} "imgui/imgui_impl_opengl2.cpp")
|
|
set_source_files_properties("imgui/imgui_impl_opengl3.cpp" PROPERTIES SKIP_PRECOMPILE_HEADERS TRUE)
|
|
set_source_files_properties("imgui/imgui_impl_opengl2.cpp" PROPERTIES SKIP_PRECOMPILE_HEADERS TRUE)
|
|
|
|
if (WITH_CRASHPAD)
|
|
set(DEFINITIONS ${DEFINITIONS} "WITH_CRASHPAD")
|
|
set(SOURCES ${SOURCES} "utilities/crashreporter.cpp")
|
|
if (WIN32)
|
|
include_directories("${DEPS_DIR}/crashpad/include" "${DEPS_DIR}/crashpad/include/mini_chromium")
|
|
else()
|
|
include_directories("${DEPS_DIR}/crashpad/crashpad" "${DEPS_DIR}/crashpad/crashpad/third_party/mini_chromium/mini_chromium")
|
|
endif()
|
|
endif()
|
|
|
|
if(WITH_PYTHON)
|
|
set(DEFINITIONS ${DEFINITIONS} "WITH_PYTHON")
|
|
set(SOURCES ${SOURCES} "scripting/PyInt.cpp")
|
|
else()
|
|
set(SOURCES ${SOURCES} "scripting/PyIntStub.cpp")
|
|
endif()
|
|
|
|
if (WITH_UART)
|
|
set(DEFINITIONS ${DEFINITIONS} "WITH_UART")
|
|
set(SOURCES ${SOURCES} "utilities/uart.cpp")
|
|
endif()
|
|
|
|
if (WITH_ZMQ)
|
|
set(DEFINITIONS ${DEFINITIONS} "WITH_ZMQ")
|
|
set(SOURCES ${SOURCES} "input/zmq_input.cpp")
|
|
endif()
|
|
|
|
if (WITH_OPENVR)
|
|
set(DEFINITIONS ${DEFINITIONS} "WITH_OPENVR")
|
|
set(SOURCES ${SOURCES} "vr/openvr_imp.cpp")
|
|
endif()
|
|
|
|
if (WITH_LUA)
|
|
set(DEFINITIONS ${DEFINITIONS} "WITH_LUA")
|
|
set(SOURCES ${SOURCES} "scripting/lua.cpp")
|
|
endif()
|
|
|
|
# the script screens (scripting/scriptscreens.cpp), with the Lua and the WebAssembly runtime when they're built
|
|
set(SOURCES ${SOURCES} "scripting/scriptscreens.cpp")
|
|
if (WITH_LUA)
|
|
set(SOURCES ${SOURCES} "scripting/luaprogram.cpp")
|
|
endif()
|
|
if (WITH_WASM)
|
|
set(DEFINITIONS ${DEFINITIONS} "WITH_WASM")
|
|
set(SOURCES ${SOURCES} "scripting/wasmprogram.cpp")
|
|
endif()
|
|
|
|
if (WITHDUMPGEN)
|
|
set(DEFINITIONS ${DEFINITIONS} "WITHDUMPGEN")
|
|
endif()
|
|
|
|
if (WITH_OPENGL_MODERN)
|
|
set(SOURCES ${SOURCES}
|
|
"rendering/opengl33geometrybank.cpp"
|
|
"rendering/opengl33light.cpp"
|
|
"rendering/opengl33skydome.cpp"
|
|
"rendering/opengl33precipitation.cpp"
|
|
"rendering/opengl33particles.cpp"
|
|
"rendering/opengl33terrain.cpp"
|
|
"rendering/opengl33screenpost.cpp"
|
|
"rendering/opengl33renderer.cpp")
|
|
set(DEFINITIONS ${DEFINITIONS} "WITH_OPENGL_MODERN")
|
|
endif()
|
|
|
|
if (WITH_OPENGL_LEGACY)
|
|
set(SOURCES ${SOURCES}
|
|
"rendering/openglgeometrybank.cpp"
|
|
"rendering/opengllight.cpp"
|
|
"rendering/openglskydome.cpp"
|
|
"rendering/openglprecipitation.cpp"
|
|
"rendering/openglparticles.cpp"
|
|
"rendering/openglrenderer.cpp")
|
|
set(DEFINITIONS ${DEFINITIONS} "WITH_OPENGL_LEGACY")
|
|
endif()
|
|
|
|
add_subdirectory("${DEPS_DIR}/glfw/" EXCLUDE_FROM_ALL)
|
|
|
|
set(SOURCES ${SOURCES} "extras/piped_proc.cpp" "widgets/cameraview_extcam.cpp")
|
|
|
|
find_package(Git)
|
|
|
|
if (GIT_FOUND AND EXISTS "${CMAKE_SOURCE_DIR}/.git")
|
|
execute_process(
|
|
COMMAND ${GIT_EXECUTABLE} describe --match=DUMMY --always --dirty
|
|
WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
|
|
OUTPUT_VARIABLE GIT_HASH
|
|
OUTPUT_STRIP_TRAILING_WHITESPACE
|
|
)
|
|
|
|
execute_process(
|
|
COMMAND ${GIT_EXECUTABLE} show -s --format=%ci
|
|
WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
|
|
OUTPUT_VARIABLE SRC_DATE
|
|
OUTPUT_STRIP_TRAILING_WHITESPACE
|
|
)
|
|
|
|
execute_process(
|
|
COMMAND ${GIT_EXECUTABLE} show -s --format=%cs
|
|
WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
|
|
OUTPUT_VARIABLE SRC_SHORT_DATE
|
|
OUTPUT_STRIP_TRAILING_WHITESPACE
|
|
)
|
|
else()
|
|
string(TIMESTAMP SRC_SHORT_DATE %Y-%m-%d UTC)
|
|
string(TIMESTAMP SRC_DATE UTC)
|
|
set(GIT_HASH "(unknown)")
|
|
endif()
|
|
|
|
configure_file("${CMAKE_SOURCE_DIR}/version_info.h.in" "${CMAKE_BINARY_DIR}/geninc/version_info.h")
|
|
|
|
# the icons of the editor are built into the executable: the png is written out as the bytes of an array, see editor/editorIcons.cpp
|
|
set(EDITOR_ICONS "${CMAKE_SOURCE_DIR}/editor/icons/editor_icons.png")
|
|
set_property(DIRECTORY APPEND PROPERTY CMAKE_CONFIGURE_DEPENDS "${EDITOR_ICONS}")
|
|
file(READ "${EDITOR_ICONS}" EDITOR_ICONS_HEX HEX)
|
|
string(REGEX REPLACE "(................................)" "\\1\n" EDITOR_ICONS_HEX "${EDITOR_ICONS_HEX}")
|
|
string(REGEX REPLACE "([0-9a-f][0-9a-f])" "0x\\1," EDITOR_ICONS_HEX "${EDITOR_ICONS_HEX}")
|
|
file(CONFIGURE OUTPUT "${CMAKE_BINARY_DIR}/geninc/editor_icons_png.inc" CONTENT "${EDITOR_ICONS_HEX}\n")
|
|
|
|
set (PREFIX "")
|
|
set (SUFFIX "")
|
|
|
|
if (ADD_VERSION_SUFFIX)
|
|
set (SUFFIX "_${SRC_SHORT_DATE}_${GIT_HASH}")
|
|
endif()
|
|
|
|
# a build without AVX2 says so in its name, so a starter can pick it on a CPU without AVX2
|
|
if (NOT ENABLE_AVX2)
|
|
set (SUFFIX "${SUFFIX}_noavx2")
|
|
endif()
|
|
|
|
set(OPENVR_LIBRARY "openvr_api")
|
|
set(OPENVR_INCLUDE_DIR "")
|
|
|
|
if (WIN32)
|
|
set(DEFINITIONS ${DEFINITIONS} "HAVE_ROUND") # to make pymath to not redefine round
|
|
# set(DEFINITIONS ${DEFINITIONS} "GLFW_DLL")
|
|
|
|
set(SOURCES ${SOURCES} "windows.cpp" "Console.cpp" "Console/LPT.cpp" "Console/PoKeys55.cpp")
|
|
#set(GLFW3_INCLUDE_DIR ${GLFW3_INCLUDE_DIR} "${DEPS_DIR}/glfw/include/")
|
|
set(PNG_INCLUDE_DIRS ${PNG_INCLUDE_DIRS} "${DEPS_DIR}/libpng/include/")
|
|
#set(ZLIB_INCLUDE_DIR ${ZLIB_INCLUDE_DIR} "${DEPS_DIR}/zlib/")
|
|
set(OPENAL_INCLUDE_DIR ${OPENAL_INCLUDE_DIR} "${DEPS_DIR}/openal/include")
|
|
set(LIBSNDFILE_INCLUDE_DIR ${LIBSNDFILE_INCLUDE_DIR} "${DEPS_DIR}/libsndfile/include")
|
|
set(LUAJIT_INCLUDE_DIR ${LUAJIT_INCLUDE_DIR} "${DEPS_DIR}/luajit/include")
|
|
set(libserialport_INCLUDE_DIR ${LIBSERIALPORT_INCLUDE_DIR} "${DEPS_DIR}/libserialport/include")
|
|
set(OPENVR_INCLUDE_DIR "${DEPS_DIR}/openvr/include")
|
|
|
|
#if(${CMAKE_EXE_LINKER_FLAGS} STREQUAL "/machine:x64")
|
|
# set (ARCH "x64")
|
|
#else()
|
|
# set (ARCH "x86")
|
|
#endif()
|
|
|
|
set(ARCH "x64")
|
|
set (PREFIX "-${ARCH}")
|
|
|
|
#set(GLFW3_LIBRARIES ${GLFW3_LIBRARIES} "${DEPS_DIR}/glfw/lib/${ARCH}/glfw3dll.lib")
|
|
set(PNG_LIBRARIES ${PNG_LIBRARIES} "${DEPS_DIR}/libpng/lib/${ARCH}/libpng16.lib")
|
|
set(OPENAL_LIBRARY ${OPENAL_LIBRARY} "${DEPS_DIR}/openal/lib/${ARCH}/OpenAL32.lib")
|
|
set(LIBSNDFILE_LIBRARY ${LIBSNDFILE_LIBRARY} "${DEPS_DIR}/libsndfile/lib/${ARCH}/libsndfile-1.lib")
|
|
set(LUAJIT_LIBRARIES ${LUAJIT_LIBRARIES} "${DEPS_DIR}/luajit/lib/${ARCH}/lua51.lib")
|
|
set(libserialport_LIBRARY ${LIBSERIALPORT_LIBRARY} "${DEPS_DIR}/libserialport/lib/${ARCH}/libserialport-0.lib")
|
|
set(cppzmq_LIBRARY ${cppzmq_LIBRARY} "${DEPS_DIR}/cppzmq/lib/${ARCH}/libzmq.lib")
|
|
set(OPENVR_LIBRARY "${DEPS_DIR}/openvr/lib/${ARCH}/openvr_api.lib")
|
|
endif()
|
|
|
|
set(cppzmq_INCLUDE_DIR ${cppzmq_INCLUDE_DIR} "${DEPS_DIR}/cppzmq/include")
|
|
set(GLM_INCLUDE_DIR ${GLM_INCLUDE_DIR} "${DEPS_DIR}/glm/")
|
|
|
|
# Process version.rc.in into version.rc
|
|
configure_file(${CMAKE_SOURCE_DIR}/eu07.rc.in
|
|
${CMAKE_BINARY_DIR}/eu07.rc @ONLY)
|
|
|
|
if (${CMAKE_CXX_COMPILER_ID} STREQUAL MSVC)
|
|
set(SOURCES ${SOURCES} ${CMAKE_BINARY_DIR}/eu07.rc)
|
|
set(SOURCES ${SOURCES} eu07.ico)
|
|
set(SOURCES ${SOURCES} eu07.ico
|
|
editor/editorSettings.hpp)
|
|
add_compile_options("/utf-8")
|
|
endif()
|
|
|
|
# the build settings of the game: include dirs, definitions, compile options and libraries. the game,
|
|
# its core library and the unit tests all build with the same ones
|
|
add_library(eu07_settings INTERFACE)
|
|
|
|
# the parts of the simulation the game shares with the unit tests: the vehicle physics, the vehicle
|
|
# definition parser, the helpers they use and the rules of the test mode. built once, and tested as the game uses them
|
|
set(CORE_SOURCES
|
|
"McZapkie/friction.cpp"
|
|
"McZapkie/hamulce.cpp"
|
|
"McZapkie/Mover.cpp"
|
|
"McZapkie/couplerphysics.cpp"
|
|
"McZapkie/Oerlikon_ESt.cpp"
|
|
"utilities/parser.cpp"
|
|
"utilities/utilities.cpp"
|
|
"scripting/ladderlogic.cpp"
|
|
"scripting/scriptscreenrules.cpp"
|
|
"scripting/scriptscreenkernels.cpp"
|
|
"scripting/scriptscreendrawing.cpp"
|
|
"simulation/simulationtestrules.cpp"
|
|
"vehicle/blackbox.cpp"
|
|
"utilities/physicslog.cpp"
|
|
"vehicle/enginestart.cpp"
|
|
"vehicle/brakesetting.cpp"
|
|
"vehicle/brakingcurve.cpp"
|
|
"vehicle/handover.cpp"
|
|
"vehicle/horn.cpp"
|
|
"vehicle/linebreaker.cpp"
|
|
"vehicle/smoke.cpp"
|
|
"vehicle/odometer.cpp"
|
|
)
|
|
add_library(eu07_core STATIC ${CORE_SOURCES})
|
|
target_link_libraries(eu07_core PUBLIC eu07_settings)
|
|
set_target_properties(eu07_core PROPERTIES
|
|
ARCHIVE_OUTPUT_DIRECTORY "${CMAKE_BINARY_DIR}/lib"
|
|
FOLDER "libraries")
|
|
|
|
add_executable(${PROJECT_NAME} ${SOURCES} ${HEADERS})
|
|
target_link_libraries(${PROJECT_NAME} eu07_core)
|
|
|
|
target_compile_definitions(eu07_settings INTERFACE ${DEFINITIONS})
|
|
|
|
target_include_directories(eu07_settings INTERFACE
|
|
"."
|
|
"Console"
|
|
"McZapkie"
|
|
"gl"
|
|
"${DEPS_DIR}/glad/include"
|
|
"${DEPS_DIR}/dds-ktx/include"
|
|
"${DEPS_DIR}/zstd"
|
|
"${CMAKE_BINARY_DIR}/geninc"
|
|
"${GLOBAL_INCLUDE_DIR}")
|
|
|
|
if (${CMAKE_CXX_COMPILER_ID} STREQUAL MSVC)
|
|
# override cmake defaults
|
|
set(CMAKE_CXX_FLAGS_RELWITHDEBINFO " /MD /Zi /O2 /DNDEBUG")
|
|
set(CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO " /DEBUG /INCREMENTAL:NO /OPT:REF /OPT:ICF")
|
|
|
|
target_link_options(${PROJECT_NAME} PRIVATE "/MAP")
|
|
|
|
# /wd4996: disable "deprecation" warnings
|
|
# /wd4244: disable warnings for conversion with possible loss of data
|
|
# /wd5033: disable because it is all over Python headers
|
|
target_compile_options(eu07_settings INTERFACE /wd4996 /wd4244 /wd5033)
|
|
set_target_properties(${PROJECT_NAME} PROPERTIES LINK_FLAGS "/LARGEADDRESSAWARE")
|
|
endif()
|
|
|
|
set_target_properties( ${PROJECT_NAME}
|
|
PROPERTIES
|
|
ARCHIVE_OUTPUT_DIRECTORY "${CMAKE_BINARY_DIR}/lib"
|
|
LIBRARY_OUTPUT_DIRECTORY "${CMAKE_BINARY_DIR}/lib"
|
|
RUNTIME_OUTPUT_DIRECTORY "${CMAKE_BINARY_DIR}/bin"
|
|
PDB_OUTPUT_DIRECTORY "${CMAKE_BINARY_DIR}/pdb"
|
|
OUTPUT_NAME "${PROJECT_NAME}${PREFIX}${SUFFIX}"
|
|
DEBUG_POSTFIX "_d"
|
|
)
|
|
|
|
check_cxx_symbol_exists(__GNUC__ "" COMPILER_HAVE_GNUC)
|
|
if (COMPILER_HAVE_GNUC)
|
|
target_compile_options(eu07_settings INTERFACE -fvisibility=hidden)
|
|
endif()
|
|
|
|
if(NOT ${CMAKE_VERSION} VERSION_LESS "3.16.0")
|
|
option(USE_PCH "Use precompiled header" ON)
|
|
|
|
if (USE_PCH)
|
|
target_precompile_headers(${PROJECT_NAME} PRIVATE "$<$<COMPILE_LANGUAGE:CXX>:${CMAKE_CURRENT_SOURCE_DIR}/stdafx.h>")
|
|
target_precompile_headers(eu07_core PRIVATE "$<$<COMPILE_LANGUAGE:CXX>:${CMAKE_CURRENT_SOURCE_DIR}/stdafx.h>")
|
|
set_source_files_properties("/glad/src/glad.c" "ref/dds-ktx/src/dds-ktx.c" "ref/zstd/zstd.c" "stb/stb_image.c"
|
|
"imgui/imgui.cpp" "imgui/imgui_demo.cpp" "imgui/imgui_draw.cpp" "imgui/imgui_widgets.cpp" "imgui/imgui_tables.cpp" "imgui/imgui_impl_glfw.cpp" "imgui/ImGuizmo.cpp"
|
|
PROPERTIES SKIP_PRECOMPILE_HEADERS TRUE)
|
|
endif()
|
|
endif()
|
|
|
|
if (USE_LTO)
|
|
set_property(TARGET ${PROJECT_NAME} eu07_core PROPERTY INTERPROCEDURAL_OPTIMIZATION TRUE)
|
|
endif()
|
|
|
|
if (WITH_OPENVR)
|
|
target_include_directories(eu07_settings INTERFACE ${OPENVR_INCLUDE_DIR})
|
|
target_link_libraries(eu07_settings INTERFACE ${OPENVR_LIBRARY})
|
|
endif()
|
|
|
|
if (WITH_CRASHPAD)
|
|
if (WIN32)
|
|
target_link_libraries(${PROJECT_NAME} "${DEPS_DIR}/crashpad/lib_md/base.lib")
|
|
target_link_libraries(${PROJECT_NAME} "${DEPS_DIR}/crashpad/lib_md/client.lib")
|
|
target_link_libraries(${PROJECT_NAME} "${DEPS_DIR}/crashpad/lib_md/util.lib")
|
|
else()
|
|
target_link_libraries(${PROJECT_NAME} "${DEPS_DIR}/crashpad/crashpad/out/Default/obj/client/libclient.a")
|
|
target_link_libraries(${PROJECT_NAME} "${DEPS_DIR}/crashpad/crashpad/out/Default/obj/util/libutil.a")
|
|
target_link_libraries(${PROJECT_NAME} "${DEPS_DIR}/crashpad/crashpad/out/Default/obj/third_party/mini_chromium/mini_chromium/base/libbase.a")
|
|
endif()
|
|
endif()
|
|
|
|
target_link_libraries(eu07_settings INTERFACE glfw)
|
|
|
|
if(WITH_PYTHON)
|
|
find_package(Python3 3.14 REQUIRED COMPONENTS Development)
|
|
target_include_directories(eu07_settings INTERFACE ${Python3_INCLUDE_DIRS})
|
|
target_link_libraries(eu07_settings INTERFACE ${Python3_LIBRARIES})
|
|
|
|
if(WIN32)
|
|
# Python3_ROOT_DIR is only an input hint and is not populated by
|
|
# find_package(... COMPONENTS Development). Derive the install root from
|
|
# the include dir (parent of <root>/include) when it was not provided.
|
|
if(NOT Python3_ROOT_DIR)
|
|
get_filename_component(Python3_ROOT_DIR "${Python3_INCLUDE_DIRS}" DIRECTORY)
|
|
endif()
|
|
set(EU07_PY_DLL "${Python3_ROOT_DIR}/python314.dll")
|
|
set(EU07_PY_ZLIB "${Python3_ROOT_DIR}/DLLs/zlib1.dll")
|
|
set(EU07_PY_LIBDIR "${Python3_ROOT_DIR}/Lib")
|
|
set(EU07_PY_DLLSDIR "${Python3_ROOT_DIR}/DLLs")
|
|
endif()
|
|
endif()
|
|
|
|
if (NOT WIN32)
|
|
find_package(PNG 1.6 REQUIRED)
|
|
target_link_libraries(eu07_settings INTERFACE PNG::PNG)
|
|
else()
|
|
include_directories(${PNG_INCLUDE_DIRS})
|
|
target_link_libraries(eu07_settings INTERFACE ${PNG_LIBRARIES})
|
|
endif()
|
|
|
|
find_package(Threads REQUIRED)
|
|
target_link_libraries(eu07_settings INTERFACE Threads::Threads)
|
|
|
|
find_package(GLM REQUIRED)
|
|
target_include_directories(eu07_settings INTERFACE ${GLM_INCLUDE_DIR})
|
|
|
|
# JSON lib
|
|
add_subdirectory(ref/json)
|
|
target_link_libraries(eu07_settings INTERFACE nlohmann_json::nlohmann_json)
|
|
target_include_directories(eu07_settings INTERFACE ${NLOHMANN_JSON_INCLUDE_INSTALL_DIR})
|
|
|
|
|
|
|
|
if (WITH_DISCORD_RPC)
|
|
add_subdirectory(ref/discord-rpc)
|
|
set_target_properties(discord-rpc PROPERTIES FOLDER "libraries")
|
|
target_link_libraries(eu07_settings INTERFACE discord-rpc)
|
|
|
|
# Add the include directory so the compiler can find discord_rpc.h
|
|
target_include_directories(eu07_settings INTERFACE
|
|
"${CMAKE_CURRENT_SOURCE_DIR}/ref/discord-rpc/include"
|
|
)
|
|
|
|
target_compile_definitions(eu07_settings INTERFACE WITH_DISCORD_RPC=1)
|
|
else()
|
|
target_compile_definitions(eu07_settings INTERFACE WITH_DISCORD_RPC=0)
|
|
endif()
|
|
|
|
if(WITH_EDITOR_SELFTESTS)
|
|
target_compile_definitions(eu07_settings INTERFACE WITH_EDITOR_SELFTESTS=1)
|
|
else()
|
|
target_compile_definitions(eu07_settings INTERFACE WITH_EDITOR_SELFTESTS=0)
|
|
endif()
|
|
|
|
find_package(OpenAL REQUIRED)
|
|
if (TARGET OpenAL::OpenAL)
|
|
target_link_libraries(eu07_settings INTERFACE OpenAL::OpenAL)
|
|
else()
|
|
target_include_directories(eu07_settings INTERFACE ${OPENAL_INCLUDE_DIR})
|
|
target_link_libraries(eu07_settings INTERFACE ${OPENAL_LIBRARY})
|
|
endif()
|
|
|
|
find_package(SndFile REQUIRED)
|
|
target_link_libraries(eu07_settings INTERFACE SndFile::sndfile)
|
|
|
|
if (WITH_LUA)
|
|
find_package(LuaJIT REQUIRED)
|
|
target_include_directories(eu07_settings INTERFACE ${LUAJIT_INCLUDE_DIR})
|
|
target_link_libraries(eu07_settings INTERFACE ${LUAJIT_LIBRARIES})
|
|
endif()
|
|
|
|
if (WITH_UART)
|
|
find_package(libserialport REQUIRED)
|
|
target_include_directories(eu07_settings INTERFACE ${libserialport_INCLUDE_DIR})
|
|
target_link_libraries(eu07_settings INTERFACE ${libserialport_LIBRARY})
|
|
endif()
|
|
|
|
find_package(ASIO REQUIRED)
|
|
target_link_libraries(eu07_settings INTERFACE asio::asio)
|
|
|
|
if (WIN32)
|
|
target_link_libraries(eu07_settings INTERFACE ws2_32)
|
|
endif()
|
|
|
|
# http client of the editor, for the orthophoto, the terrain model and the topo map of geoportal.gov.pl: WinHTTP on Windows,
|
|
# libcurl elsewhere when available
|
|
if (WIN32)
|
|
target_link_libraries(eu07_settings INTERFACE winhttp)
|
|
else()
|
|
find_package(CURL QUIET)
|
|
if (CURL_FOUND)
|
|
target_link_libraries(eu07_settings INTERFACE CURL::libcurl)
|
|
target_compile_definitions(eu07_settings INTERFACE EU07_WITH_CURL)
|
|
else()
|
|
message(STATUS "libcurl not found: the editor's orthophoto and terrain model will only show what's cached, its topo map nothing")
|
|
endif()
|
|
endif()
|
|
|
|
if (WITH_ZMQ)
|
|
find_package(cppzmq REQUIRED)
|
|
target_include_directories(eu07_settings INTERFACE ${cppzmq_INCLUDE_DIR})
|
|
target_link_libraries(eu07_settings INTERFACE ${cppzmq_LIBRARY})
|
|
endif()
|
|
|
|
if (WIN32)
|
|
add_custom_command(TARGET ${PROJECT_NAME} POST_BUILD
|
|
COMMAND ${CMAKE_COMMAND} -E copy -t $<TARGET_FILE_DIR:${PROJECT_NAME}> $<TARGET_RUNTIME_DLLS:${PROJECT_NAME}>
|
|
COMMAND_EXPAND_LISTS
|
|
)
|
|
endif ()
|
|
|
|
# Linux: the game loads its shared libraries from its own folder first ($ORIGIN), and the build copies them there,
|
|
# so the folder runs on a system that doesn't have them, or has other versions. the RPATH is a DT_RPATH rather
|
|
# than a DT_RUNPATH, because only that one is also used for the libraries the copied ones load (libsndfile's codecs)
|
|
if (UNIX AND NOT APPLE)
|
|
option(BUNDLE_RUNTIME_LIBS "Linux: copy the shared libraries the game needs next to it and load them from there" ON)
|
|
endif()
|
|
if (UNIX AND NOT APPLE AND BUNDLE_RUNTIME_LIBS)
|
|
set_target_properties(${PROJECT_NAME} PROPERTIES
|
|
BUILD_WITH_INSTALL_RPATH TRUE
|
|
INSTALL_RPATH "$ORIGIN")
|
|
target_link_options(${PROJECT_NAME} PRIVATE "LINKER:--disable-new-dtags")
|
|
|
|
# the RPATH no longer leads to libraries outside the system folders (Python from setup-python, an OpenAL Soft
|
|
# in /usr/local), so their folders are given to the script as well
|
|
set(EU07_BUNDLE_SEARCH_DIRS "")
|
|
foreach(library IN LISTS Python3_LIBRARIES OPENAL_LIBRARY LUAJIT_LIBRARIES libserialport_LIBRARY)
|
|
if (IS_ABSOLUTE "${library}")
|
|
get_filename_component(library_dir "${library}" DIRECTORY)
|
|
list(APPEND EU07_BUNDLE_SEARCH_DIRS "${library_dir}")
|
|
endif()
|
|
endforeach()
|
|
list(APPEND EU07_BUNDLE_SEARCH_DIRS ${Python3_LIBRARY_DIRS})
|
|
list(REMOVE_DUPLICATES EU07_BUNDLE_SEARCH_DIRS)
|
|
string(REPLACE ";" "|" EU07_BUNDLE_SEARCH_DIRS "${EU07_BUNDLE_SEARCH_DIRS}")
|
|
|
|
add_custom_command(TARGET ${PROJECT_NAME} POST_BUILD
|
|
COMMAND ${CMAKE_COMMAND}
|
|
-DGAME=$<TARGET_FILE:${PROJECT_NAME}>
|
|
-DSEARCH_DIRS=${EU07_BUNDLE_SEARCH_DIRS}
|
|
-DCMAKE_OBJDUMP=${CMAKE_OBJDUMP}
|
|
-P "${CMAKE_CURRENT_SOURCE_DIR}/CMake_modules/bundle_runtime_libs.cmake"
|
|
COMMENT "Copying the shared libraries next to the game"
|
|
VERBATIM)
|
|
endif()
|
|
|
|
if(WIN32 AND WITH_PYTHON)
|
|
# the Python runtime next to the game, copied when it isn't there yet or the Python install changed, rather
|
|
# than after every link of the game: the library alone is thousands of files. the folder is the game's
|
|
# RUNTIME_OUTPUT_DIRECTORY, spelled out: $<TARGET_FILE_DIR:eu07> here would make this target depend on the game
|
|
get_property(EU07_MULTI_CONFIG GLOBAL PROPERTY GENERATOR_IS_MULTI_CONFIG)
|
|
if (EU07_MULTI_CONFIG)
|
|
set(EU07_PY_TARGET_DIR "${CMAKE_BINARY_DIR}/bin/$<CONFIG>")
|
|
else()
|
|
set(EU07_PY_TARGET_DIR "${CMAKE_BINARY_DIR}/bin")
|
|
endif()
|
|
set(EU07_PY_STAMP "${EU07_PY_TARGET_DIR}/python64/python_runtime.stamp")
|
|
add_custom_command(
|
|
OUTPUT "${EU07_PY_STAMP}"
|
|
COMMAND ${CMAKE_COMMAND} -E copy_if_different "${EU07_PY_DLL}" "${EU07_PY_TARGET_DIR}"
|
|
COMMAND ${CMAKE_COMMAND} -E copy_if_different "${EU07_PY_ZLIB}" "${EU07_PY_TARGET_DIR}"
|
|
COMMAND ${CMAKE_COMMAND} -E copy_directory_if_different "${EU07_PY_LIBDIR}" "${EU07_PY_TARGET_DIR}/python64/Lib"
|
|
COMMAND ${CMAKE_COMMAND} -E copy_directory_if_different "${EU07_PY_DLLSDIR}" "${EU07_PY_TARGET_DIR}/python64/DLLs"
|
|
COMMAND ${CMAKE_COMMAND} -E touch "${EU07_PY_STAMP}"
|
|
DEPENDS "${EU07_PY_DLL}" "${EU07_PY_ZLIB}"
|
|
COMMENT "Copying the Python runtime next to the game"
|
|
VERBATIM)
|
|
add_custom_target(eu07_python_runtime DEPENDS "${EU07_PY_STAMP}")
|
|
set_target_properties(eu07_python_runtime PROPERTIES FOLDER "libraries")
|
|
add_dependencies(${PROJECT_NAME} eu07_python_runtime)
|
|
endif()
|
|
|
|
if (WITH_WASM)
|
|
add_subdirectory("CMake_modules/wamr" "${CMAKE_CURRENT_BINARY_DIR}/wamr")
|
|
target_link_libraries(${PROJECT_NAME} eu07_wamr)
|
|
endif ()
|
|
|
|
if (WITH_BETTER_RENDERER)
|
|
add_subdirectory("betterRenderer")
|
|
set_target_properties(betterRenderer betterRenderer_fsr2 betterRenderer_shaders PROPERTIES FOLDER "renderers")
|
|
target_link_libraries(${PROJECT_NAME} "betterRenderer")
|
|
endif ()
|
|
|
|
# yaml-cpp, for the descriptions of scenery templates edited in the scenery editor.
|
|
# the experimental renderer brings in the same copy on its own, when enabled
|
|
if (NOT TARGET yaml-cpp)
|
|
add_subdirectory("betterRenderer/thirdparty/yaml-cpp" "${CMAKE_CURRENT_BINARY_DIR}/yaml-cpp" EXCLUDE_FROM_ALL)
|
|
endif ()
|
|
target_link_libraries(eu07_settings INTERFACE yaml-cpp)
|
|
|
|
|
|
# Enable compiling with debug symbols
|
|
if(GENERATE_PDB)
|
|
if (MSVC)
|
|
# Ensure Debug and Release configurations use appropriate runtime libraries
|
|
set(CMAKE_CXX_FLAGS_DEBUG "${CMAKE_CXX_FLAGS_DEBUG} /Zi /MDd")
|
|
set(CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} /Zi /MD")
|
|
|
|
# Add compile options for debugging
|
|
add_compile_options(/Zi) # Always enable debug symbols
|
|
add_link_options(/DEBUG /MAP)
|
|
|
|
# Ensure that the PCH is built with the correct runtime library for each configuration
|
|
set_target_properties(${PROJECT_NAME} eu07_core PROPERTIES
|
|
COMPILE_OPTIONS "$<$<CONFIG:Debug>:/MDd>$<$<CONFIG:Release>:/MD>")
|
|
else()
|
|
# GCC/Clang (ensure -g is set for all configurations)
|
|
add_compile_options(-g)
|
|
endif()
|
|
endif()
|
|
|
|
if(ENABLE_MCC AND MSVC)
|
|
message(STATUS "Enabling multi-processor compilation for MSVC.")
|
|
add_compile_options(/MP)
|
|
endif()
|
|
|
|
if(ENABLE_AVX2)
|
|
message(STATUS "Enabling AVX2 instruction set.")
|
|
if (MSVC)
|
|
target_compile_options(eu07_settings INTERFACE /arch:AVX2)
|
|
else()
|
|
target_compile_options(eu07_settings INTERFACE -mavx2)
|
|
endif()
|
|
endif()
|
|
|
|
if(WITH_TESTS)
|
|
enable_testing()
|
|
add_subdirectory(tests/unit)
|
|
# the unit tests run at the end of building the game, once it's linked: a failing one fails the build
|
|
# (and removes the game binary, so the next build links it again and reruns them)
|
|
add_dependencies(${PROJECT_NAME} eu07_unit_tests)
|
|
add_custom_command(TARGET ${PROJECT_NAME} POST_BUILD
|
|
COMMAND ${CMAKE_COMMAND}
|
|
-DTESTS=$<TARGET_FILE:eu07_unit_tests>
|
|
-DGAME=$<TARGET_FILE:${PROJECT_NAME}>
|
|
-P "${CMAKE_CURRENT_SOURCE_DIR}/tests/unit/run_tests.cmake"
|
|
COMMENT "Running the unit tests"
|
|
VERBATIM)
|
|
# a change of the tests alone links the game again, so they run (Ninja and Makefile generators;
|
|
# Visual Studio builds rerun them with the next change of the game)
|
|
set_property(TARGET ${PROJECT_NAME} APPEND PROPERTY LINK_DEPENDS
|
|
$<TARGET_FILE:eu07_unit_tests> ${UNIT_TEST_DATA} "${CMAKE_CURRENT_SOURCE_DIR}/tests/unit/run_tests.cmake")
|
|
endif()
|