18
0
mirror of https://github.com/MaSzyna-EU07/maszyna.git synced 2026-11-19 22:44:59 +01:00
Files
maszyna/world
maj00r 5c8cc6d9a5 feat(ai): PointVelocity, a speed limit for the head of the train at a point beyond the cell (#304)
* feat(ai): PointVelocity, a speed limit for the head of the train at a point beyond the cell

A memory cell (or putvalues) with "PointVelocity v d" tells the train that the head has to be at v km/h
at the point d metres beyond the cell (v -1: no limit). The cell is read by the speed table scan like a
signal, live until the head passes it; what it says then is kept for the point, later changes of the
cell don't concern that train. The limit ends when the head passes the point, it doesn't hold the rest
of the train and doesn't extend or break a speed limit of the line, like W27 of length 0 moved d metres
on. The AI brakes so the head reaches the point at v; for a human driver it only shows as the next
speed limit of the driving aid, the security systems don't see it.

It is made for the warning disc of a level crossing (TOP, Osp1/Osp2), which has to give 20 km/h at the
crossing about 500 m beyond the disc, as the disc showed when the train passed it.

The cell with PointVelocity as its first command makes its getvalues scanned (passive) as SetVelocity
does; PutCommand ignores it when such an event runs. Old commands keep working as they did,
SetProximityVelocity included.

* fix(ai): a point limit isn't a signal, and a PointVelocity 0 can be released

From the review of the PointVelocity commit:
- a cell rewritten from SetVelocity or ShuntVelocity to PointVelocity drops the flags of a signal, so it
  can't count as a semaphor or report a signal passed at danger;
- PointVelocity 0 is read on after the head passes the cell, as a stop of a signal is, otherwise the
  train would stand short of the point for good;
- a point limit doesn't become eSignNext, so a W4 between the disc and the crossing keeps its release.

* fix(ai): a PointVelocity limit outlives a rebuilt speed table, and holds when shunting

The state of the cell, latched when the head passes it, is now kept by the
controller apart from the speed table, and the distance to the point is
measured by the movement of the consist in the world. Stopping, backing up
and going on between the cell and the point, coupling or a takeover no longer
lose the limit or read the cell anew, unless the head backs up past the cell,
when the cell is read again.

Near the point the desired speed is capped to the limit, so a train that
coasts within its tolerance (as a shunting one does) reaches the point at it.

* fix(ai): review of the latched point limits

- a point the head has passed already isn't latched, and a latched limit at
  or behind the head isn't applied (it asked for a full brake for a cycle);
- a latched limit is dropped once the head backs up behind its cell, so it
  can't follow the consist onto another track; the table reads the cell again;
- a cell latched already, found under the consist by a rebuilt table, is
  ignored whatever it shows now (a 0 for the next train no longer stops it);
- PointVelocity 0 stops at the usual distance, not from the approach;
- the heading follows the track under the measured vehicle, not the chord of
  the consist, which a long consist on a tight curve holds far off the track;
- vehicles coupled or uncoupled at the end towards the point move the head;
- a jump of the consist (moved elsewhere) drops the latched limits.

* fix(ai): a cab change and curves don't move the latched point limits

- the end of the consist towards the point is taken into the distance only
  when the consist changes (its end vehicles or its length), not when another
  vehicle is measured from (a cab change at a reversal) nor when a curve
  shortens its projection;
- the way of travel follows the direction of the driver's vehicle against
  its own couplers, not the chord of the consist, which on a balloon loop
  points against it.

* fix(ai): a coupling with a cab change in one order still moves the head of a latched point limit

The end of the consist measured from the previous vehicle is moved to the place of the new one, so a coupling or an uncoupling followed at once by a change of direction to the other cab (the shunting orders) is taken into the distance to the point.

---------

Co-authored-by: maj00r <maj00r@host>
2026-11-10 18:44:33 +01:00
..