maszyna

Curve.h

Reorganize source files into logical subdirectories

2026-03-14 19:01:57 +00:00

Event.cpp

feat(scenery): models laid along curves (sweep nodes), bent to follow the paths or repeated along them, loaded and saved with the scenery; trainsets put on a path while the simulation runs; trainset turned around by reversed after its header: the first vehicle stays at the offset and leads towards point 1, the rest stands behind it; launcher keeps reversed trainsets and can turn one around; memory cells saved with the new name of the path they name; events tell their targets and the events of a multiple event; renderer tells whether the cursor is over a surface; vehicle placed in the editor entered when the driving goes on

2026-10-06 22:19:32 +02:00

Event.h

feat(scenery): models laid along curves (sweep nodes), bent to follow the paths or repeated along them, loaded and saved with the scenery; trainsets put on a path while the simulation runs; trainset turned around by reversed after its header: the first vehicle stays at the offset and leads towards point 1, the rest stands behind it; launcher keeps reversed trainsets and can turn one around; memory cells saved with the new name of the path they name; events tell their targets and the events of a multiple event; renderer tells whether the cursor is over a surface; vehicle placed in the editor entered when the driving goes on

2026-10-06 22:19:32 +02:00

EvLaunch.cpp

Fix/sonar maintainability rebased (#209 )

2026-10-11 13:22:33 +02:00

EvLaunch.h

Fix/sonar maintainability rebased (#209 )

2026-10-11 13:22:33 +02:00

GaugeLine.cpp

refactor(track): the rail code is split by concern into gauge lines, crossings and check rails, rail materials, rail profile measuring, planning the cuts and laying the geometry, instead of one TrackRails.cpp; rail_offset reuses nearest_distance and lateral; TTrack::rail_dimensions measures the profile through track_rails::measure_rail

2026-10-17 23:29:08 +02:00

GaugeLine.h

refactor(track): the rail code is split by concern into gauge lines, crossings and check rails, rail materials, rail profile measuring, planning the cuts and laying the geometry, instead of one TrackRails.cpp; rail_offset reuses nearest_distance and lateral; TTrack::rail_dimensions measures the profile through track_rails::measure_rail

2026-10-17 23:29:08 +02:00

Knots.h

feat(track): 3D sleepers and switch timbers, blade heel and throw from templates, one rail carving pass

2026-10-17 23:32:43 +02:00

MemCell.cpp

Fix/sonar maintainability rebased (#209 )

2026-10-11 13:22:33 +02:00

MemCell.h

Fix/sonar maintainability rebased (#209 )

2026-10-11 13:22:33 +02:00

mtable.cpp

Fix/sonar maintainability rebased (#209 )

2026-10-11 13:22:33 +02:00

mtable.h

Fix/sonar maintainability rebased (#209 )

2026-10-11 13:22:33 +02:00

RailCarve.cpp

fix(track): the carving scan's near() clashed with the near macro of windows.h on MSVC

2026-10-19 18:37:44 +02:00

RailCrossings.cpp

fix(track): the blades of a slip laid in the editor are shaped from their templates as the ones of a switch are, from the tip where their planed nose ends, so they start where the view marks the tips of the blades and the drive stands, not at the joint before them: the crossings of the diamond the blades end short of were looked for only among the tracks with their rails cut, which the simulator never cuts, so the slips kept the blades laid from the start of the switch. They're found now among the tracks with their rails whole too, for the blades of a slip only. Selftest bladetips: the blades of the four switches of an Rkpd 49E1-190-1:9 from 1.248 m to 7.55 m, as the drives; Rz 60E1-300-1:9 unchanged, 1.5 to 12.69 m

2026-10-27 19:21:40 +01:00

RailLayer.cpp

feat(track): 3D sleepers and switch timbers, blade heel and throw from templates, one rail carving pass

2026-10-17 23:32:43 +02:00

RailLayout.h

feat(track): 3D sleepers and switch timbers, blade heel and throw from templates, one rail carving pass

2026-10-17 23:32:43 +02:00

RailMaterials.cpp

refactor(track): the plates, fillers and check rails of a rail drawing are made from one box_profile and one helper for both sides, and the colour of a tread is sampled by sample_dds and sample_image into one colour_mean, a block of a DXT texture decoded by add_dxt_block, instead of one function

2026-10-17 23:29:08 +02:00

RailPlan.cpp

feat(track): 3D sleepers and switch timbers, blade heel and throw from templates, one rail carving pass

2026-10-17 23:32:43 +02:00

RailProfile.cpp

feat(track): 3D sleepers and switch timbers, blade heel and throw from templates, one rail carving pass

2026-10-17 23:32:43 +02:00

Road.cpp

feat(roads): lanes change within a road piece (lanesto), junctions of two roads from earlier sceneries are loaded as such pieces and saved as roads; the editor leads the lanes of neighbouring pieces with them

2026-10-04 05:00:52 +02:00

Road.h

feat(roads): lanes change within a road piece (lanesto), junctions of two roads from earlier sceneries are loaded as such pieces and saved as roads; the editor leads the lanes of neighbouring pieces with them

2026-10-04 05:00:52 +02:00

RoadOrder.h

feat(roads): right of way and lane turns at junctions, road weights, kerbs, medians and forking roads, banks to the ground, roundabouts, pedestrian crossings, spawn sets by count; fix(editor): model skin export, placement on the ground under the orthophoto

2026-10-04 01:55:35 +02:00

RoadPoint.cpp

feat(roads): lanes change within a road piece (lanesto), junctions of two roads from earlier sceneries are loaded as such pieces and saved as roads; the editor leads the lanes of neighbouring pieces with them

2026-10-04 05:00:52 +02:00

RoadPoint.h

feat(roads): right of way and lane turns at junctions, road weights, kerbs, medians and forking roads, banks to the ground, roundabouts, pedestrian crossings, spawn sets by count; fix(editor): model skin export, placement on the ground under the orthophoto

2026-10-04 01:55:35 +02:00

Segment.cpp

feat(editor,track): a cant ramp of its own, off the transition curve: each end of a curve may have its ramp moved and of a length of its own (ST-T1-A6 9.6 pkt 5 and 11), on the straight before the curve or on the arc, the transition keeping the full cant all along, as a switch laid on it wants it; set in the plan under "Cant ramps", stored with the vertex as "ramps", reversed with the curve, marked across the track in the view. The cant of a line is a profile along it now, the paths cut where a ramp of its own starts and ends, their rolls following it, warnings where a ramp is shorter than its cant asks for or reaches into the curve before, past the line or over the other ramp. A switch on a cant ramp is drawn following it: its rails, blades, frogs and bed made at the mean of its rolls, as before, are turned along each path to the roll of the path there, so it no longer steps at its ends against the tracks either side. The checks of a switch laid into a curve warn of the values of table 11.9 in brackets as of the others, with no word of a consent. Unit test of a ramp moved onto the straight

2026-10-25 00:54:50 +02:00

Segment.h

feat(editor,track): a cant ramp of its own, off the transition curve: each end of a curve may have its ramp moved and of a length of its own (ST-T1-A6 9.6 pkt 5 and 11), on the straight before the curve or on the arc, the transition keeping the full cant all along, as a switch laid on it wants it; set in the plan under "Cant ramps", stored with the vertex as "ramps", reversed with the curve, marked across the track in the view. The cant of a line is a profile along it now, the paths cut where a ramp of its own starts and ends, their rolls following it, warnings where a ramp is shorter than its cant asks for or reaches into the curve before, past the line or over the other ramp. A switch on a cant ramp is drawn following it: its rails, blades, frogs and bed made at the mean of its rolls, as before, are turned along each path to the roll of the path there, so it no longer steps at its ends against the tracks either side. The checks of a switch laid into a curve warn of the values of table 11.9 in brackets as of the others, with no word of a consent. Unit test of a ramp moved onto the straight

2026-10-25 00:54:50 +02:00

SleeperFeatures.cpp

refactor(track): the sleeper layout split by concern instead of one TrackSleepers.cpp

2026-10-18 00:27:50 +02:00

SleeperFeatures.h

refactor(track): the sleeper layout split by concern instead of one TrackSleepers.cpp

2026-10-18 00:27:50 +02:00

SleeperGeometry.h

refactor(track): the sleeper layout split by concern instead of one TrackSleepers.cpp

2026-10-18 00:27:50 +02:00

SleeperLayout.cpp

refactor(track): the sleeper layout split by concern instead of one TrackSleepers.cpp

2026-10-18 00:27:50 +02:00

SleeperLayout.h

refactor(track): the sleeper layout split by concern instead of one TrackSleepers.cpp

2026-10-18 00:27:50 +02:00

SleeperLines.cpp

refactor(track): the sleeper layout split by concern instead of one TrackSleepers.cpp

2026-10-18 00:27:50 +02:00

SleeperLines.h

refactor(track): the sleeper layout split by concern instead of one TrackSleepers.cpp

2026-10-18 00:27:50 +02:00

SleeperModels.cpp

refactor(track): the sleeper layout split by concern instead of one TrackSleepers.cpp

2026-10-18 00:27:50 +02:00

SleeperPaths.cpp

refactor(track): the sleeper layout split by concern instead of one TrackSleepers.cpp

2026-10-18 00:27:50 +02:00

SleeperPaths.h

refactor(track): the sleeper layout split by concern instead of one TrackSleepers.cpp

2026-10-18 00:27:50 +02:00

SleeperRules.h

refactor(track): the sleeper layout split by concern instead of one TrackSleepers.cpp

2026-10-18 00:27:50 +02:00

SleeperWorker.cpp

refactor(track): the sleeper layout split by concern instead of one TrackSleepers.cpp

2026-10-18 00:27:50 +02:00

SleeperWorker.h

refactor(track): the sleeper layout split by concern instead of one TrackSleepers.cpp

2026-10-18 00:27:50 +02:00

Spring.cpp

Fix/sonar maintainability rebased (#209 )

2026-10-11 13:22:33 +02:00

Spring.h

Fix/sonar maintainability rebased (#209 )

2026-10-11 13:22:33 +02:00

station.cpp

Fix/sonar maintainability rebased (#209 )

2026-10-11 13:22:33 +02:00

station.h

Fix/sonar maintainability rebased (#209 )

2026-10-11 13:22:33 +02:00

Sweep.cpp

fix(sweep): local named near renamed, MSVC takes near for the empty macro of windows.h and fails on the syntax

2026-10-08 08:51:06 +02:00

Sweep.h

feat(editor): platform edge put 1.725, 1.675 or 1.650 m from the axis of the track as chosen, kept in the editor settings; models along a track set back by the gauge of the other path of each switch whose points their line passes, also when they stand by the plain track ahead of the switch or by its straight path, the widening led in from the tracks beyond the diverging path; the line beyond the ends of a sweep goes on along the straightest path

2026-10-08 01:12:30 +02:00

Track.cpp

fix(track): two switches laid right after one another, with no plain track between them, are joined, the vehicles no longer derail there: only the plain tracks looked for their neighbours, so the end of the main track of one switch at the start of the next one was joined to nothing, and an axle getting to it ran onto a track made to derail it. TTrack::join_switches joins the free ends of a switch to the ends of other switches in the same points, on both sides, with the codes of the ends the axles go on by: the end of either path of one at the start of the other, two facing at their starts, two meeting at their ends; done once the plain tracks are joined as the scenery is loaded, the old sceneries too, and as the editor joins a switch laid. Selftest pathwalk walks the tracks as an axle does: P2 to P1, P4 to P1, start to start and end to end go through either way

2026-10-26 20:40:51 +01:00

Track.h

fix(track): two switches laid right after one another, with no plain track between them, are joined, the vehicles no longer derail there: only the plain tracks looked for their neighbours, so the end of the main track of one switch at the start of the next one was joined to nothing, and an axle getting to it ran onto a track made to derail it. TTrack::join_switches joins the free ends of a switch to the ends of other switches in the same points, on both sides, with the codes of the ends the axles go on by: the end of either path of one at the start of the other, two facing at their starts, two meeting at their ends; done once the plain tracks are joined as the scenery is loaded, the old sceneries too, and as the editor joins a switch laid. Selftest pathwalk walks the tracks as an axle does: P2 to P1, P4 to P1, start to start and end to end go through either way

2026-10-26 20:40:51 +01:00

TrackFeatures.h

feat(track): the blades of the switches laid in the editor shaped from their templates with the frogs still whole: the blades alone are on (track_features::blades), the rails cut at the frogs, the wing and the check rails stay off. A switch with the key frogs draws its blades from the tip where their planed nose ends to the heel, bent as they're thrown, the rail behind them from the heel on, where they were laid from the start of the switch before; on a switch of the catalogue they start at the cut tip of the tables, 1.248 m from the joint at R 190, 1.5 m at R 300. The plain track a blade of a double switch runs on into starts its rail behind the heel. The switches without the key, laid by other tools, and the ones of a double slip, whose blades end short of crossings found only with the rails cut, keep the blades they had. The paths the vehicles run on don't change

2026-10-26 20:40:28 +01:00

TrackRails.h

feat(track): the blades of the switches laid in the editor shaped from their templates with the frogs still whole: the blades alone are on (track_features::blades), the rails cut at the frogs, the wing and the check rails stay off. A switch with the key frogs draws its blades from the tip where their planed nose ends to the heel, bent as they're thrown, the rail behind them from the heel on, where they were laid from the start of the switch before; on a switch of the catalogue they start at the cut tip of the tables, 1.248 m from the joint at R 190, 1.5 m at R 300. The plain track a blade of a double switch runs on into starts its rail behind the heel. The switches without the key, laid by other tools, and the ones of a double slip, whose blades end short of crossings found only with the rails cut, keep the blades they had. The paths the vehicles run on don't change

2026-10-26 20:40:28 +01:00

TrackSleepers.cpp

refactor(track): the sleeper layout split by concern instead of one TrackSleepers.cpp

2026-10-18 00:27:50 +02:00

TrackSleepers.h

refactor(track): the sleeper layout split by concern instead of one TrackSleepers.cpp

2026-10-18 00:27:50 +02:00

Traction.cpp

Fix/sonar maintainability rebased (#209 )

2026-10-11 13:22:33 +02:00

Traction.h

Fix/sonar maintainability rebased (#209 )

2026-10-11 13:22:33 +02:00

TractionPower.cpp

Fix/sonar maintainability rebased (#209 )

2026-10-11 13:22:33 +02:00

TractionPower.h

Fix/sonar maintainability rebased (#209 )

2026-10-11 13:22:33 +02:00

TrkFoll.cpp

feat(track): 3D sleepers and switch timbers, blade heel and throw from templates, one rail carving pass

2026-10-17 23:32:43 +02:00

TrkFoll.h

feat(track): 3D sleepers and switch timbers, blade heel and throw from templates, one rail carving pass

2026-10-17 23:32:43 +02:00