mirror of
https://github.com/MaSzyna-EU07/maszyna.git
synced 2026-10-20 18:34:53 +02:00
d72fa51ce5
- SleeperRules: the rules beams are laid by and the faults counted where the layout breaks them - SleeperGeometry: plan helpers, beam boxes with their overlap and support tests and a grid of cells, shared by laying, filling gaps, keeping beams apart and checking instead of three copies of each - SleeperPaths: sampled paths, how near they run and whether one carries another; the tracks near a track and the stretches of a path where a test holds, shared by paths_around/unsettle_around and shared_zones/zones_of - SleeperFeatures: frogs and crossings the timbers turn to; SleeperLines: lines of beams, the rails they carry, where they part - SleeperLayout: clusters and their layout, given the epoch instead of reading it; SleeperModels: the models of the beams - SleeperWorker: the layouts kept per epoch and worked out in the background, behind a small interface - TrackSleepers: the facade, laying the instances, the shared zones and the check - sleepercheck reports a digest of all beams; geomhash skips empty chunks instead of crashing The layout is unchanged: geomhash, sleepercheck with the digest, wings, space, guards, crossings and switches give the same output on baltyk, zz_rozjazdy_id4, zz_rf_slips, zz_rf_wide, zz_slips_s42, zz_demo_przechylka and zz_connections.
76 lines
3.9 KiB
C++
76 lines
3.9 KiB
C++
/*
|
|
This Source Code Form is subject to the
|
|
terms of the Mozilla Public License, v.
|
|
2.0. If a copy of the MPL was not
|
|
distributed with this file, You can
|
|
obtain one at
|
|
http://mozilla.org/MPL/2.0/.
|
|
*/
|
|
|
|
#pragma once
|
|
|
|
#include <cstddef>
|
|
|
|
// the rules the sleepers and timbers are laid by, and the record of where the layout had to break them
|
|
namespace track_sleepers {
|
|
|
|
// how far apart the beams are along the track, and how far closer or further they may go to put one where a pin is
|
|
double constexpr pitch { 0.6 };
|
|
double constexpr pitch_min { 0.83 * pitch };
|
|
double constexpr pitch_max { 1.08 * pitch };
|
|
// how far out from the middle of a track its rail reaches past half the gauge: the foot of the rail outside the gauge line
|
|
double constexpr rail_reach { 0.1115 };
|
|
// how far a beam reaches out past the foot of the rail, 2.6 m sleepers under the standard gauge, and how far at least
|
|
double constexpr overhang { 0.471 };
|
|
double constexpr overhang_min { 0.25 };
|
|
// how far the feet of the rails a timber carries may stand off one plane
|
|
double constexpr coplanar_tolerance { 0.01 };
|
|
// the gap left between the ends of two beams on one line
|
|
double constexpr end_gap { 0.05 };
|
|
// half the width of a beam, to keep the sleepers of a track crossing another at a wide angle clear of the timbers of the other
|
|
double constexpr half_width { 0.13 };
|
|
// a timber longer than this is a fault of the layout
|
|
double constexpr length_cap { 8.5 }; // the longest prestressed concrete bearer of EN 13230-4, under both tracks of a scissors crossing about 5 m apart
|
|
// the rails of a path crossing the line of a beam at a lower angle than this aren't laid on it
|
|
double constexpr crossing_sine_min { 0.2588 }; // 15 degrees
|
|
// two paths crossing at this angle or wider keep the beams square to each, laid as a grid
|
|
double constexpr grid_angle { 1.2915 }; // 74 degrees
|
|
// the timbers turn toward the bisector of a frog over as many beams before it
|
|
double constexpr frog_ramp { 6.0 * pitch };
|
|
// past where the tracks go apart the sleepers lie square to them at once, unless the last timber turns so far from them that
|
|
// the ends of the next sleepers would meet it: then they turn back by at most so much a beam
|
|
double constexpr turn_max { 0.2415 }; // 13.8 degrees: a sleeper 1.3 m out from the track keeps clear of one turned so far a pitch away
|
|
// how far apart the samples of a path are, to tell how far the paths around run from it
|
|
double constexpr sample_step { 0.5 };
|
|
// two paths over each other, on a bridge, aren't merged
|
|
double constexpr level_tolerance { 1.0 };
|
|
// how far around a track the tracks are taken in to lay its beams: those whose beams it carries, or which carry its own, and
|
|
// those which set where the beams of these go
|
|
double constexpr around_margin { 20.0 };
|
|
// how many beams make a run drawn or left out together
|
|
std::size_t constexpr chunk_beams { 16 };
|
|
|
|
// how many tracks a cluster takes at most
|
|
std::size_t constexpr cluster_cap { 256 };
|
|
// how far the lines of the timbers turn from one to the next at most, so the far ends of the long ones keep their spacing, and how
|
|
// far the plain sleepers turn back square to the track from one to the next
|
|
double constexpr timber_turn { 0.0175 }; // a degree
|
|
double constexpr sleeper_turn { 0.06 }; // three and a half degrees
|
|
|
|
// what was wrong with the beams laid since the counts were taken last
|
|
struct fault_counts {
|
|
std::size_t offplane { 0 }; // timbers shared by rails out of one plane, where the tracks run too close to part them
|
|
std::size_t clipped { 0 }; // beam ends cut shorter than the least overhang, to keep clear of the beams of other tracks
|
|
std::size_t dropped { 0 }; // beams left out where they'd lie over one laid before
|
|
double slowest { 0.0 }; // the longest a cluster took to lay, in ms
|
|
std::size_t biggest { 0 }; // the most tracks in a cluster
|
|
};
|
|
|
|
inline fault_counts &faults() {
|
|
static fault_counts counts;
|
|
return counts;
|
|
}
|
|
|
|
|
|
} // namespace track_sleepers
|