maszyna

icons

feat(editor): the kilometrage tool sets the km of the railway lines, points where the km is known and jumps of the km, the rest along the axis of the line, between the tracks of a double-track one and along the longer track where they run apart, kept in the scenery as //$k lines

2026-10-22 13:27:37 +02:00

editorAlignment.cpp

feat(editor,track): a cant ramp of its own, off the transition curve: each end of a curve may have its ramp moved and of a length of its own (ST-T1-A6 9.6 pkt 5 and 11), on the straight before the curve or on the arc, the transition keeping the full cant all along, as a switch laid on it wants it; set in the plan under "Cant ramps", stored with the vertex as "ramps", reversed with the curve, marked across the track in the view. The cant of a line is a profile along it now, the paths cut where a ramp of its own starts and ends, their rolls following it, warnings where a ramp is shorter than its cant asks for or reaches into the curve before, past the line or over the other ramp. A switch on a cant ramp is drawn following it: its rails, blades, frogs and bed made at the mean of its rolls, as before, are turned along each path to the roll of the path there, so it no longer steps at its ends against the tracks either side. The checks of a switch laid into a curve warn of the values of table 11.9 in brackets as of the others, with no word of a consent. Unit test of a ramp moved onto the straight

2026-10-25 00:54:50 +02:00

editorAlignment.hpp

feat(editor,track): a cant ramp of its own, off the transition curve: each end of a curve may have its ramp moved and of a length of its own (ST-T1-A6 9.6 pkt 5 and 11), on the straight before the curve or on the arc, the transition keeping the full cant all along, as a switch laid on it wants it; set in the plan under "Cant ramps", stored with the vertex as "ramps", reversed with the curve, marked across the track in the view. The cant of a line is a profile along it now, the paths cut where a ramp of its own starts and ends, their rolls following it, warnings where a ramp is shorter than its cant asks for or reaches into the curve before, past the line or over the other ramp. A switch on a cant ramp is drawn following it: its rails, blades, frogs and bed made at the mean of its rolls, as before, are turned along each path to the roll of the path there, so it no longer steps at its ends against the tracks either side. The checks of a switch laid into a curve warn of the values of table 11.9 in brackets as of the others, with no word of a consent. Unit test of a ramp moved onto the straight

2026-10-25 00:54:50 +02:00

editorAlignmentStore.cpp

feat(editor,track): a cant ramp of its own, off the transition curve: each end of a curve may have its ramp moved and of a length of its own (ST-T1-A6 9.6 pkt 5 and 11), on the straight before the curve or on the arc, the transition keeping the full cant all along, as a switch laid on it wants it; set in the plan under "Cant ramps", stored with the vertex as "ramps", reversed with the curve, marked across the track in the view. The cant of a line is a profile along it now, the paths cut where a ramp of its own starts and ends, their rolls following it, warnings where a ramp is shorter than its cant asks for or reaches into the curve before, past the line or over the other ramp. A switch on a cant ramp is drawn following it: its rails, blades, frogs and bed made at the mean of its rolls, as before, are turned along each path to the roll of the path there, so it no longer steps at its ends against the tracks either side. The checks of a switch laid into a curve warn of the values of table 11.9 in brackets as of the others, with no word of a consent. Unit test of a ramp moved onto the straight

2026-10-25 00:54:50 +02:00

editorAlignmentStore.hpp

feat(editor): the plan shows which curve is edited: each named W1, W2... as its vertex is in the view, with its km and "Show in the view", which flies the camera over it; the part of it whose field the mouse is over or which is being edited (the whole curve, an arc of a compound one, the transition in, out or between two arcs) lit up in the view and named there with its radius, cant or length. The points clicked when a line is laid are kept with its design in the scenery ("click" lines, moved with it): the plan shows them in the colours of their departure and, while "Keep to the points clicked" is on, fits the radii of a curve whose transitions or cants are changed again to them, its transitions and cants as set; "Transitions for these cants" makes the transitions as long as the norms ask for at the radii and the cants set, an arc of a compound curve with no cant lengthening the ones either side of it. Unit test: 50 m between the arcs become 85 m, the curve 4 cm off the points clicked instead of 58

2026-10-25 00:11:58 +02:00

editorClips.cpp

feat(editor): Help > Tutorial instead of First steps: seven lessons (looking around, laying track, curves, joining, switches, selecting and fixing, saving and driving), each with a looping clip from lang/editor_tutorial/<lesson>.gif played from the start on a click, the mouse buttons and keys drawn as pictures beside what they do, ticks that fill in when the user does it, a button that turns the right tool on, Back / Next and a dot per lesson that turns green when it is done

2026-10-17 23:30:37 +02:00

editorClips.hpp

feat(editor): Help > Tutorial instead of First steps: seven lessons (looking around, laying track, curves, joining, switches, selecting and fixing, saving and driving), each with a looping clip from lang/editor_tutorial/<lesson>.gif played from the start on a click, the mouse buttons and keys drawn as pictures beside what they do, ticks that fill in when the user does it, a button that turns the right tool on, Back / Next and a dot per lesson that turns green when it is done

2026-10-17 23:30:37 +02:00

editorConnections.cpp

feat(editor): connections of tracks laid whole from the switch tool: a crossover with a straight insert or an aligning curve between switches of different angles or tracks that aren't parallel, a double crossover meeting on either track, a scissors crossover with the crossing of its inserts, and a switch ladder onto the parallel tracks of a fan or onto new ones at given spacings; press on a straight and drag onto the other track, Shift+wheel the kind, Ctrl+wheel the R of the aligning curve, Alt+wheel where a double crossover meets; the ghost shows the whole set with the spacing, the inserts and the distance of the mathematical points; switches get their drives and a //$r connection record; the crossover drawn from a diverging end uses the same solver; self-test connection

2026-10-14 23:38:31 +02:00

editorConnections.hpp

feat(editor): connections of tracks laid whole from the switch tool: a crossover with a straight insert or an aligning curve between switches of different angles or tracks that aren't parallel, a double crossover meeting on either track, a scissors crossover with the crossing of its inserts, and a switch ladder onto the parallel tracks of a fan or onto new ones at given spacings; press on a straight and drag onto the other track, Shift+wheel the kind, Ctrl+wheel the R of the aligning curve, Alt+wheel where a double crossover meets; the ghost shows the whole set with the spacing, the inserts and the distance of the mathematical points; switches get their drives and a //$r connection record; the crossover drawn from a diverging end uses the same solver; self-test connection

2026-10-14 23:38:31 +02:00

editorFormat.hpp

refactor(editor): the helpers repeated over the editor files are shared

2026-10-21 10:28:42 +02:00

editorGauge.cpp

Structure gauge refactor: outline ring, tilt in the sections, outline choice, shared track line

2026-10-04 02:22:57 +02:00

editorGauge.hpp

Structure gauge refactor: outline ring, tilt in the sections, outline choice, shared track line

2026-10-04 02:22:57 +02:00

editorGeoMap.cpp

fix(editor): the map of the scenery wizard north up from its first image: the thread loading it keeps the north edge in the first row, not flipped or not as the texture loader left stb by then

2026-10-24 17:25:26 +02:00

editorGeoMap.hpp

feat(editor): a map of Poland to pick a place on, shared by the scenery wizard and the terrain model

2026-10-21 13:20:25 +02:00

editorGeometry.hpp

refactor(editor): the helpers repeated over the editor files are shared

2026-10-21 10:28:42 +02:00

editorGroundFollow.cpp

fix(editor): the heights from point to point broke the grade only at the bends of straights which stay bends, a curve traced or bends clicked close along a curve going at one grade from one of its ends to the other, attached there; and two tracks laid no longer meet at two heights where a point was clicked within 5 m of their joint, each end of a piece not cut there taking the height of its own stretch, not of the one the middle of the piece lies on (steps of 0.6 m on a steep grade in abc). Unit tests of the heights from point to point

2026-10-24 22:28:43 +02:00

editorGroundFollow.hpp

feat(editor): the curves of the laying from the photo in the design of the lines: a vertex of two transition curves meeting at its radius, with no arc and no cant, kept in the scenery files; the bends of straights eased with them at a radius from 6000 down to 3000 m, or larger where they'd be too short for the speed, else with an arc of the norms as large as fits, the straights between two bends shared, the bends staying where they were clicked and a curve below the norms kept with its warnings; a stretch traced on the photo fitted with a straight, a curve with its radius and the length of its transitions, a compound one, or two curves with a straight between them, on a thread of its own while the cursor moves; the heights from point to point through all the points clicked. Unit tests of the design of the lines

2026-10-24 20:57:59 +02:00

editorGroundMesh.hpp

Editor terrain: texture browser, undo, conversion from terrain files

2026-10-09 23:39:26 +02:00

editorHttp.cpp

feat(editor): heightmap terrain from the terrain model of GUGiK, fitted to the tracks of the scenery

2026-10-18 12:56:25 +02:00

editorHttp.hpp

feat(editor): heightmap terrain from the terrain model of GUGiK, fitted to the tracks of the scenery

2026-10-18 12:56:25 +02:00

editorIcons.cpp

feat(editor): icons over the 3d view: the tools of the field of work along its left edge (the edit modes of the surroundings, the track tools, the road tools with the lanes, the terrain tools with the orthophoto), the modes of the gizmo at its top, the axes of the world as the camera sees them in its top right corner, a click on one looking along it, with the top view under them; the icons drawn by editor/icons/editor_icons.py into a png which CMake writes out as an array built into the executable; the gizmo modes and the top view left out of the toolbar; Polish translation

2026-10-09 11:54:47 +02:00

editorIcons.hpp

feat(editor): the kilometrage tool sets the km of the railway lines, points where the km is known and jumps of the km, the rest along the axis of the line, between the tracks of a double-track one and along the longer track where they run apart, kept in the scenery as //$k lines

2026-10-22 13:27:37 +02:00

editorIncludeInfo.cpp

feat(editor): a block signal template knows its aspects, 4 where its events give S3, the green light flashing with the next signal at S5, else 3; one step of the signalling takes includes away too, the signals among them with their read events, Ctrl+Z bringing them back with the rest of it

2026-10-22 19:26:25 +02:00

editorIncludeInfo.hpp

feat(editor): a block signal template knows its aspects, 4 where its events give S3, the green light flashing with the next signal at S5, else 3; one step of the signalling takes includes away too, the signals among them with their read events, Ctrl+Z bringing them back with the rest of it

2026-10-22 19:26:25 +02:00

editorInfra.cpp

feat(editor): labels for a layman, light at the start; whole sceneries fitted to the terrain model

2026-10-19 15:27:50 +02:00

editorInfra.hpp

feat(editor): the signals and the signs by a track go with it as the Plan lays it anew, square to the line, not along it

2026-10-22 21:32:34 +02:00

editorKilometrage.cpp

feat(editor): the hectometre posts go by the kilometrage of the line where the Kilometrage tool sets it, its jumps too, a post at a jump of the km on from it or of the km it is reached at, the km given at the point still there as a choice; the posts standing go with the place of their number nearest to them

2026-10-22 14:33:18 +02:00

editorKilometrage.hpp

feat(editor): the hectometre posts go by the kilometrage of the line where the Kilometrage tool sets it, its jumps too, a post at a jump of the km on from it or of the km it is reached at, the km given at the point still there as a choice; the posts standing go with the place of their number nearest to them

2026-10-22 14:33:18 +02:00

editorModelSets.cpp

feat(editor): user-defined model sets, random insert from set, tabbed editor panel

2026-10-01 18:41:35 +02:00

editorModelSets.hpp

feat(editor): user-defined model sets, random insert from set, tabbed editor panel

2026-10-01 18:41:35 +02:00

editorNmt.cpp

feat(editor): the terrain model asks again for what it didn't get, can be stopped and says when the place is outside Poland

2026-10-21 13:20:20 +02:00

editorNmt.hpp

feat(editor): the terrain model asks again for what it didn't get, can be stopped and says when the place is outside Poland

2026-10-21 13:20:20 +02:00

editorOrthophoto.cpp

feat(editor): the chunks waiting for the terrain model and the tiles of the orthophoto asked for and not shown yet outlined on the ground where they will be, pulsing, blue and orange, named where the name fits: at the heights of the terrain beside them or of the model, else level with the nearest chunk or track

2026-10-24 18:31:24 +02:00

editorOrthophoto.hpp

feat(editor): the chunks waiting for the terrain model and the tiles of the orthophoto asked for and not shown yet outlined on the ground where they will be, pulsing, blue and orange, named where the name fits: at the heights of the terrain beside them or of the model, else level with the nearest chunk or track

2026-10-24 18:31:24 +02:00

editorPreviews.cpp

feat(editor): fields of work in a row of their own over the toolbar (surroundings, tracks, roads, terrain), twice as high, with bigger bold text, and the tools of the one chosen in the toolbar under it: the edit modes of the node bank, the track tools in groups with the vehicle and the structure gauge, the road tools with what the place tool puts, the terrain tools (sculpt, smooth, chunks, orthophoto); the tool options window keeps the settings of the tool; the node bank shows a big preview of the entry pointed at for a moment, with its model and skin; the green colours by default again; Polish translation

2026-10-09 00:42:17 +02:00

editorPreviews.hpp

feat(editor): fields of work in a row of their own over the toolbar (surroundings, tracks, roads, terrain), twice as high, with bigger bold text, and the tools of the one chosen in the toolbar under it: the edit modes of the node bank, the track tools in groups with the vehicle and the structure gauge, the road tools with what the place tool puts, the terrain tools (sculpt, smooth, chunks, orthophoto); the tool options window keeps the settings of the tool; the node bank shows a big preview of the entry pointed at for a moment, with its model and skin; the green colours by default again; Polish translation

2026-10-09 00:42:17 +02:00

editorProfile.cpp

feat(editor): the tracks laid on the terrain model go onto it as the tracks going onto the terrain do, the chain laid since the laying began fitted again at each click, with the tracks around kept and met; a straight or an arc cut by the fit before made one again, a path cut only where it would part from the line by more than 3 cm; a choice of the heights while laying: fitted, from point to point, level, kept in the settings; the fit taken back with its click

2026-10-23 15:55:58 +02:00

editorProfile.hpp

feat(editor): the tracks laid on the terrain model go onto it as the tracks going onto the terrain do, the chain laid since the laying began fitted again at each click, with the tracks around kept and met; a straight or an arc cut by the fit before made one again, a path cut only where it would part from the line by more than 3 cm; a choice of the heights while laying: fitted, from point to point, level, kept in the settings; the fit taken back with its click

2026-10-23 15:55:58 +02:00

editorRoad.cpp

fix(editor): guard the places where the editor could crash outright

2026-10-21 08:42:29 +02:00

editorRoad.hpp

feat(roads): lanes change within a road piece (lanesto), junctions of two roads from earlier sceneries are loaded as such pieces and saved as roads; the editor leads the lanes of neighbouring pieces with them

2026-10-04 05:00:52 +02:00

editorSettings.cpp

feat(editor): the tracks are laid to the PKP PLK norms only: the choice of the free laying is gone, its cards in the panels of the laying and of the plan, the question as the laying starts and the setting; the transition curves and the cant of the norms always, the speed of the laying with its chips, the radius below the minimum for the speed a warning. The settings keep the radii the bends of the straights will be eased with instead

2026-10-24 20:05:04 +02:00

editorSettings.hpp

feat(editor): the tracks are laid to the PKP PLK norms only: the choice of the free laying is gone, its cards in the panels of the laying and of the plan, the question as the laying starts and the setting; the transition curves and the cant of the norms always, the speed of the laying with its chips, the radius below the minimum for the speed a warning. The settings keep the radii the bends of the straights will be eased with instead

2026-10-24 20:05:04 +02:00

editorSpeed.cpp

feat(editor): labels for a layman, light at the start; whole sceneries fitted to the terrain model

2026-10-19 15:27:50 +02:00

editorSpeed.hpp

feat(tracks): speed check of the paths against the speed their geometry allows: radius and cant, cant ramps, curves without transitions, switch branches

2026-10-05 01:21:11 +02:00

editorStation.cpp

feat(editor): the station schematic generalized: each station track on a row of its own, the stretches between the switches shortened, the connections slanted between the rows, the signals and the useful lengths on the drawn tracks

2026-10-23 12:51:58 +02:00

editorStation.hpp

feat(editor): the station schematic generalized: each station track on a row of its own, the stretches between the switches shortened, the connections slanted between the rows, the signals and the useful lengths on the drawn tracks

2026-10-23 12:51:58 +02:00

editorSwitchCurve.cpp

feat(editor,track): a cant ramp of its own, off the transition curve: each end of a curve may have its ramp moved and of a length of its own (ST-T1-A6 9.6 pkt 5 and 11), on the straight before the curve or on the arc, the transition keeping the full cant all along, as a switch laid on it wants it; set in the plan under "Cant ramps", stored with the vertex as "ramps", reversed with the curve, marked across the track in the view. The cant of a line is a profile along it now, the paths cut where a ramp of its own starts and ends, their rolls following it, warnings where a ramp is shorter than its cant asks for or reaches into the curve before, past the line or over the other ramp. A switch on a cant ramp is drawn following it: its rails, blades, frogs and bed made at the mean of its rolls, as before, are turned along each path to the roll of the path there, so it no longer steps at its ends against the tracks either side. The checks of a switch laid into a curve warn of the values of table 11.9 in brackets as of the others, with no word of a consent. Unit test of a ramp moved onto the straight

2026-10-25 00:54:50 +02:00

editorSwitchCurve.hpp

feat(editor): a switch laid into a curve is checked by ST-T1-A6 as it's placed: the radii of its main and diverging tracks at its start and its end shown at it; warnings where the curvature of a track turns from one side to the other within it (KZW II, 9.7 pkt 12), where the diverging track is sharper or the main track bent more than table 11.9 allows the basic switch (the values allowed by way of exception named), where a switch of 1:9.403 or steeper is bent (11.4 pkt 4), where the cant changes within it (11.4 pkt 7), where a cant ramp starts or ends within it or under 6 m off it (9.6 pkt 16-17) and where the cant is over 100 mm (table 9.6); a note on a transition curve, which only an exception allows. The ends of the cant ramps are marked on the curve, and the start of the switch pressed within 3 m of where it starts or ends at an end of a ramp, or keeps the 6 m off it, is drawn there. The warnings stay in the status once it's laid. The checks stand on their own in editor/editorSwitchCurve, with unit tests

2026-10-25 00:29:05 +02:00

editorSwitchDesign.cpp

fix(editor): guard the places where the editor could crash outright

2026-10-21 08:42:29 +02:00

editorSwitchDesign.hpp

feat(track): 3D sleepers and switch timbers, blade heel and throw from templates, one rail carving pass

2026-10-17 23:32:43 +02:00

editorSwitchStore.cpp

feat(editor): the signalling mode numbers the switches of a station along it and names them after its code, the drives and the switch records follow, and an undo of names passed round among the tracks leaves the drives right

2026-10-22 07:50:59 +02:00

editorSwitchStore.hpp

feat(editor): the signalling mode numbers the switches of a station along it and names them after its code, the drives and the switch records follow, and an undo of names passed round among the tracks leaves the drives right

2026-10-22 07:50:59 +02:00

editorTerrain.cpp

Heightmap terrain: .tch chunk packs, streaming with LOD, terrain painting, water and modifiers - terrain/<name>/terrain.yaml + <px>_<pz>.tch packs of 16x16 chunks (250 m, 0.5/1/2/5 m spacing), slices with crc-32 and optional zstd (vendored zstd 1.5.6 in ref/zstd) - heightmap_terrain [name] endheightmap_terrain directive replaces editorterrain - streamer: worker threads, camera + look-ahead loading, geomipmap LOD with skirts, pooled geometry - mat_terrain shader: up to 8 painted layer materials per chunk via texture arrays (opengl33); other renderers fall back to the dominant material - water bodies (outline + level), terrain modifiers (vertical profile shaping kept non-destructive) - F11 Terrain work mode rebuilt: chunks, sculpt, smooth, paint, point spacing, water tools

2026-10-09 21:02:25 +02:00

editorTerrain.hpp

Heightmap terrain: .tch chunk packs, streaming with LOD, terrain painting, water and modifiers - terrain/<name>/terrain.yaml + <px>_<pz>.tch packs of 16x16 chunks (250 m, 0.5/1/2/5 m spacing), slices with crc-32 and optional zstd (vendored zstd 1.5.6 in ref/zstd) - heightmap_terrain [name] endheightmap_terrain directive replaces editorterrain - streamer: worker threads, camera + look-ahead loading, geomipmap LOD with skirts, pooled geometry - mat_terrain shader: up to 8 painted layer materials per chunk via texture arrays (opengl33); other renderers fall back to the dominant material - water bodies (outline + level), terrain modifiers (vertical profile shaping kept non-destructive) - F11 Terrain work mode rebuilt: chunks, sculpt, smooth, paint, point spacing, water tools

2026-10-09 21:02:25 +02:00

editorTerrainStreamer.cpp

perf(editor): the top view draws the terrain lighter: the cells of its grid some 16 pixels across, not 10, the chunks streamed only as far as the screen reaches, not the range of the 3D view, and the cube map of the reflections not made anew while it's shown, nothing in it reflecting

2026-10-24 19:23:01 +02:00

editorTerrainStreamer.hpp

perf(editor): the top view draws the terrain lighter: the cells of its grid some 16 pixels across, not 10, the chunks streamed only as far as the screen reaches, not the range of the 3D view, and the cube map of the reflections not made anew while it's shown, nothing in it reflecting

2026-10-24 19:23:01 +02:00

editorTrack.cpp

feat(editor): texture of the rails of path 2 of a switch set apart

2026-10-24 16:32:35 +02:00

editorTrack.hpp

feat(editor): the signals and the signs by a track go with it as the Plan lays it anew, square to the line, not along it

2026-10-22 21:32:34 +02:00

editorTrackPresets.cpp

feat(editor): presets of the track properties, applied on the selected tracks

2026-10-24 16:33:24 +02:00

editorTrackPresets.hpp

feat(editor): presets of the track properties, applied on the selected tracks

2026-10-24 16:33:24 +02:00

editorTrackShape.cpp

feat(editor): laid to the norms, a track laid on from an end gets its transition curves, into the arc, between the arcs of a compound curve and out to the straight

2026-10-21 19:51:56 +02:00