maszyna/editor/editorGauge.cpp

/*
This Source Code Form is subject to the
terms of the Mozilla Public License, v.
2.0. If a copy of the MPL was not
distributed with this file, You can
obtain one at
http://mozilla.org/MPL/2.0/.
*/

#include "stdafx.h"
#include "editor/editorGauge.hpp"

#include <fstream>
#include <sstream>

namespace gauge
{

namespace
{

// the widening runs up ahead of the change: on the inner side from 20 m before it, on the outer side from 26 m
// to 6 m before it (figures 3 to 5 of the standard)
double constexpr inner_lead{20.0};
double constexpr outer_lead{26.0};
double constexpr outer_full{6.0};

struct side_widening
{
	double inner{0.0};
	double outer{0.0};
};

// above the lower part the gauge includes the curves of R >= 250 m already
side_widening upper_widening(double const Radius)
{
	if (Radius >= 250.0)
		return {};
	return {std::max(0.0, 50.0 / Radius - 0.185), std::max(0.0, 60.0 / Radius - 0.225)};
}

side_widening lower_widening(double const Radius)
{
	if (Radius >= 250.0)
		return {3.75 / Radius, 3.75 / Radius};
	return upper_widening(Radius);
}

// values at the points of a route, read as linear between them and continued past the ends
class field
{
public:
	field(std::vector<double> const &Chainage, std::vector<double> Values) : m_chainage{Chainage}, m_values{std::move(Values)}, m_integral(m_values.size(), 0.0)
	{
		for (std::size_t i = 1; i < m_values.size(); ++i)
			m_integral[i] = m_integral[i - 1] + 0.5 * (m_values[i - 1] + m_values[i]) * (m_chainage[i] - m_chainage[i - 1]);
	}

	double mean(double const From, double const To) const
	{
		return (integral(To) - integral(From)) / (To - From);
	}

	// larger of the means over the window placed ahead of the point in both directions
	double ahead(double const Chainage, double const Near, double const Far) const
	{
		return std::max(mean(Chainage + Near, Chainage + Far), mean(Chainage - Far, Chainage - Near));
	}

private:
	double integral(double const Chainage) const
	{
		if (Chainage <= m_chainage.front())
			return m_values.front() * (Chainage - m_chainage.front());
		if (Chainage >= m_chainage.back())
			return m_integral.back() + m_values.back() * (Chainage - m_chainage.back());
		auto const next{static_cast<std::size_t>(std::upper_bound(m_chainage.begin(), m_chainage.end(), Chainage) - m_chainage.begin())};
		auto const i{next - 1};
		auto const span{m_chainage[next] - m_chainage[i]};
		auto const offset{Chainage - m_chainage[i]};
		auto const value{span > 0.0 ? m_values[i] + (m_values[next] - m_values[i]) * offset / span : m_values[i]};
		return m_integral[i] + 0.5 * (m_values[i] + value) * offset;
	}

	std::vector<double> const &m_chainage;
	std::vector<double> m_values;
	std::vector<double> m_integral;
};

} // namespace

std::vector<profile> default_profiles()
{
	// limit installation gauge up to 1170 mm, then the outline of the unified gauge
	std::vector<profile::point> const lower{{1.211, 0.055}, {1.585, 0.380}, {1.675, 0.380}, {1.675, 1.170}, {2.000, 1.170}};
	std::vector<profile::point> const gpl1{{2.000, 3.050}, {1.900, 3.850}, {1.800, 4.250}, {1.600, 4.500}, {1.450, 4.632}};
	std::vector<profile::point> const gpl2{{2.000, 3.625}, {1.920, 4.900}};
	std::vector<profile::point> const pantograph{{1.450, 6.600}, {1.150, 6.900}, {0.0, 6.900}};
	auto const make{[&](std::string const &Name, std::vector<std::vector<profile::point>> const &Parts) {
		profile result{Name, lower};
		for (auto const &part : Parts)
			result.outline.insert(result.outline.end(), part.begin(), part.end());
		return result;
	}};
	return {make("GPL-1", {gpl1, {{1.260, 4.800}, {1.180, 4.850}, {0.0, 4.850}}}), make("GPL-1 + pantograf", {gpl1, pantograph}),
	        make("GPL-2", {gpl2, {{0.0, 4.900}}}), make("GPL-2 + pantograf", {gpl2, {{1.450, 4.900}}, pantograph})};
}

// one outline per line: the name in quotes, then pairs of half-width and height
std::vector<profile> load_profiles(std::string const &File)
{
	std::ifstream input{File};
	std::vector<profile> profiles;
	std::string line;
	while (std::getline(input, line))
	{
		std::istringstream stream{line};
		profile profile;
		if (false == static_cast<bool>(stream >> std::quoted(profile.name)))
			continue;
		profile::point point;
		while (stream >> point.half_width >> point.height)
			profile.outline.push_back(point);
		if (profile.outline.size() >= 2)
			profiles.push_back(std::move(profile));
	}
	return profiles.empty() ? default_profiles() : profiles;
}

void save_profiles(std::string const &File, std::vector<profile> const &Profiles)
{
	std::ofstream output{File};
	for (auto const &profile : Profiles)
	{
		output << std::quoted(profile.name);
		for (auto const &point : profile.outline)
			output << ' ' << point.half_width << ' ' << point.height;
		output << '\n';
	}
}

std::vector<section> sections(std::vector<double> const &Chainage, std::vector<double> const &Curvature, std::vector<double> const &Cant)
{
	auto const count{Chainage.size()};
	std::vector<section> result(count);
	if (count == 0)
		return result;
	// per side, the parts when it's the inner side of the curve and when it's the outer one
	for (int side = 0; side < 2; ++side)
	{
		std::vector<double> upperinner(count), upperouter(count), lowerinner(count), lowerouter(count), cantinner(count), cantouter(count);
		for (std::size_t i = 0; i < count; ++i)
		{
			if (std::abs(Curvature[i]) < 1e-6)
				continue;
			auto const radius{1.0 / std::abs(Curvature[i])};
			bool const inner{(Curvature[i] > 0.0) == (side == 1)};
			auto const upper{upper_widening(radius)};
			auto const lower{lower_widening(radius)};
			(inner ? upperinner : upperouter)[i] = inner ? upper.inner : upper.outer;
			(inner ? lowerinner : lowerouter)[i] = inner ? lower.inner : lower.outer;
			(inner ? cantinner : cantouter)[i] = Cant[i];
		}
		field const fields[]{{Chainage, std::move(upperinner)}, {Chainage, std::move(upperouter)}, {Chainage, std::move(lowerinner)},
		                     {Chainage, std::move(lowerouter)}, {Chainage, std::move(cantinner)},  {Chainage, std::move(cantouter)}};
		for (std::size_t i = 0; i < count; ++i)
		{
			auto const inner{[&](field const &Field) { return Field.ahead(Chainage[i], 0.0, inner_lead); }};
			auto const outer{[&](field const &Field) { return Field.ahead(Chainage[i], outer_full, outer_lead); }};
			result[i].upper[side] = inner(fields[0]) + outer(fields[1]);
			result[i].lower[side] = inner(fields[2]) + outer(fields[3]);
			result[i].cant[side] = inner(fields[4]) - outer(fields[5]);
		}
	}
	return result;
}

double widening(section const &Section, double const Height, int const Side)
{
	auto const i{Side > 0 ? 1 : 0};
	return (Height < lower_part ? Section.lower[i] : Section.upper[i]) + Section.cant[i] * Height / 1.5;
}

double half_width(profile const &Profile, section const &Section, double const Height, int const Side)
{
	double width{-1.0};
	for (std::size_t i = 1; i < Profile.outline.size(); ++i)
	{
		auto const &a{Profile.outline[i - 1]};
		auto const &b{Profile.outline[i]};
		if (Height < std::min(a.height, b.height) || Height > std::max(a.height, b.height))
			continue;
		auto const span{b.height - a.height};
		width = std::max(width, std::abs(span) < 1e-9 ? std::max(a.half_width, b.half_width) : a.half_width + (b.half_width - a.half_width) * (Height - a.height) / span);
	}
	if (width < 0.0)
		return width;
	return width + widening(Section, Height, Side);
}

double intrusion(profile const &Profile, section const &Section, double const Lateral, double const Height)
{
	auto const width{half_width(Profile, Section, Height, Lateral >= 0.0 ? 1 : -1)};
	if (width < 0.0)
		return 0.0;
	return width - std::abs(Lateral);
}

} // namespace gauge