build 180531. configurable cooling fans rotation rate, additional reverser position command, minor bug fixes

DynObj.cpp

@@ -4562,7 +4562,8 @@ void TDynamicObject::LoadMMediaFile( std::string BaseDir, std::string TypeName,
             }
             if( !MoverParameters->LoadAccepted.empty() ) {
 
-                if( MoverParameters->EnginePowerSource.SourceType == CurrentCollector ) {
+                if( ( MoverParameters->EnginePowerSource.SourceType == CurrentCollector )
+                 && ( asLoadName == "pantstate" ) ) {
                     // wartość niby "pantstate" - nazwa dla formalności, ważna jest ilość
                     if( MoverParameters->Load == 1 ) {
                         MoverParameters->PantFront( true );

McZapkie/MOVER.h

@@ -669,6 +669,7 @@ struct heat_data {
 //    bool okienko { true }; // window in the engine compartment
     // system configuration
     bool auxiliary_water_circuit { false }; // cooling system has an extra water circuit
+    double fan_speed { 0.075 }; // cooling fan rpm; either fraction of engine rpm, or absolute value if negative
     // heat exchange factors
     double kw { 0.35 };
     double kv { 0.6 };

McZapkie/Mover.cpp

@@ -1616,7 +1616,7 @@ void TMoverParameters::OilPumpCheck( double const Timestep ) {
 
     OilPump.pressure_target = (
         enrot > 0.1 ? interpolate( minpressure, OilPump.pressure_maximum, static_cast<float>( clamp( enrot / maxrevolutions, 0.0, 1.0 ) ) ) * OilPump.resource_amount :
-        true == OilPump.is_active ? minpressure :
+        true == OilPump.is_active ? std::min( minpressure + 0.1f, OilPump.pressure_maximum ) : // slight pressure margin to give time to switch off the pump and start the engine
         0.f );
 
     if( OilPump.pressure_present < OilPump.pressure_target ) {
@@ -6453,7 +6453,7 @@ void TMoverParameters::dizel_Heat( double const dt ) {
            && ( dizel_heat.water_aux.config.temp_cooling > 0 )
            && ( dizel_heat.temperatura2 > dizel_heat.water_aux.config.temp_cooling - ( dizel_heat.water_aux.is_warm ? 8 : 0 ) ) ) );
         auto const PTC2 { ( dizel_heat.water_aux.is_warm /*or PTC2p*/ ? 1 : 0 ) };
-        dizel_heat.rpmwz2 = PTC2 * 80 * rpm / ( ( 0.5 * rpm ) + 500 );
+        dizel_heat.rpmwz2 = PTC2 * ( dizel_heat.fan_speed >= 0 ? ( rpm * dizel_heat.fan_speed ) : ( dizel_heat.fan_speed * -1 ) );
         dizel_heat.zaluzje2 = ( dizel_heat.water_aux.config.shutters ? ( PTC2 == 1 ) : true ); // no shutters is an equivalent to having them open
         auto const zaluzje2 { ( dizel_heat.zaluzje2 ? 1 : 0 ) };
         // auxiliary water circuit heat transfer values
@@ -6481,7 +6481,7 @@ void TMoverParameters::dizel_Heat( double const dt ) {
        && ( dizel_heat.water.config.temp_cooling > 0 )
        && ( dizel_heat.temperatura1 > dizel_heat.water.config.temp_cooling - ( dizel_heat.water.is_warm ? 8 : 0 ) ) ) );
     auto const PTC1 { ( dizel_heat.water.is_warm /*or PTC1p*/ ? 1 : 0 ) };
-    dizel_heat.rpmwz = PTC1 * 80 * rpm / ( ( 0.5 * rpm ) + 500 );
+    dizel_heat.rpmwz = PTC1 * ( dizel_heat.fan_speed >= 0 ? ( rpm * dizel_heat.fan_speed ) : ( dizel_heat.fan_speed * -1 ) );
     dizel_heat.zaluzje1 = ( dizel_heat.water.config.shutters ? ( PTC1 == 1 ) : true ); // no shutters is an equivalent to having them open
     auto const zaluzje1 { ( dizel_heat.zaluzje1 ? 1 : 0 ) };
     // primary water circuit heat transfer values
@@ -8502,6 +8502,7 @@ void TMoverParameters::LoadFIZ_Engine( std::string const &Input ) {
         extract_value( dizel_heat.water_aux.config.shutters, "WaterAuxShutters", Input, "" );
         extract_value( dizel_heat.oil.config.temp_min, "OilMinTemperature", Input, "" );
         extract_value( dizel_heat.oil.config.temp_max, "OilMaxTemperature", Input, "" );
+        extract_value( dizel_heat.fan_speed, "WaterCoolingFanSpeed", Input, "" );
         // water heater
         extract_value( WaterHeater.config.temp_min, "HeaterMinTemperature", Input, "" );
         extract_value( WaterHeater.config.temp_max, "HeaterMaxTemperature", Input, "" );

Model3d.cpp

@@ -1241,8 +1241,6 @@ bool TModel3d::LoadFromFile(std::string const &FileName, bool dynamic)
 		LoadFromBinFile(asBinary, dynamic);
 		asBinary = ""; // wyłączenie zapisu
 		Init();
-        // cache the file name, in case someone wants it later
-        m_filename = name + ".e3d";
     }
 	else
 	{
@@ -1253,10 +1251,10 @@ bool TModel3d::LoadFromFile(std::string const &FileName, bool dynamic)
                 // pojazdy dopiero po ustawieniu animacji
                 Init(); // generowanie siatek i zapis E3D
             }
-            // cache the file name, in case someone wants it later
-            m_filename = name + ".t3d";
         }
 	}
+    // cache the file name, in case someone wants it later
+    m_filename = name;
 	bool const result =
 		Root ? (iSubModelsCount > 0) : false; // brak pliku albo problem z wczytaniem
 	if (false == result)

Train.cpp

@@ -206,6 +206,7 @@ TTrain::commandhandler_map const TTrain::m_commandhandlers = {
     { user_command::mubrakingindicatortoggle, &TTrain::OnCommand_mubrakingindicatortoggle },
     { user_command::reverserincrease, &TTrain::OnCommand_reverserincrease },
     { user_command::reverserdecrease, &TTrain::OnCommand_reverserdecrease },
+    { user_command::reverserforwardhigh, &TTrain::OnCommand_reverserforwardhigh },
     { user_command::reverserforward, &TTrain::OnCommand_reverserforward },
     { user_command::reverserneutral, &TTrain::OnCommand_reverserneutral },
     { user_command::reverserbackward, &TTrain::OnCommand_reverserbackward },
@@ -1464,9 +1465,20 @@ void TTrain::OnCommand_reverserdecrease( TTrain *Train, command_data const &Comm
     }
 }
 
+void TTrain::OnCommand_reverserforwardhigh( TTrain *Train, command_data const &Command ) {
+
+    if( Command.action == GLFW_PRESS ) {
+
+        OnCommand_reverserforward( Train, Command );
+        OnCommand_reverserincrease( Train, Command );
+    }
+}
+
 void TTrain::OnCommand_reverserforward( TTrain *Train, command_data const &Command ) {
 
     if( Command.action == GLFW_PRESS ) {
+        // HACK: try to move the reverser one position back, in case it's set to "high forward"
+        OnCommand_reverserdecrease( Train, Command );
 
         if( Train->mvOccupied->ActiveDir < 1 ) {
 

Train.h

@@ -196,6 +196,7 @@ class TTrain
     static void OnCommand_mubrakingindicatortoggle( TTrain *Train, command_data const &Command );
     static void OnCommand_reverserincrease( TTrain *Train, command_data const &Command );
     static void OnCommand_reverserdecrease( TTrain *Train, command_data const &Command );
+    static void OnCommand_reverserforwardhigh( TTrain *Train, command_data const &Command );
     static void OnCommand_reverserforward( TTrain *Train, command_data const &Command );
     static void OnCommand_reverserneutral( TTrain *Train, command_data const &Command );
     static void OnCommand_reverserbackward( TTrain *Train, command_data const &Command );

command.cpp

@@ -60,6 +60,7 @@ commanddescription_sequence Commands_descriptions = {
     { "sandboxactivate", command_target::vehicle },
     { "reverserincrease", command_target::vehicle },
     { "reverserdecrease", command_target::vehicle },
+    { "reverserforwardhigh", command_target::vehicle },
     { "reverserforward", command_target::vehicle },
     { "reverserneutral", command_target::vehicle },
     { "reverserbackward", command_target::vehicle },

command.h

@@ -54,6 +54,7 @@ enum class user_command {
     sandboxactivate,
     reverserincrease,
     reverserdecrease,
+    reverserforwardhigh,
     reverserforward,
     reverserneutral,
     reverserbackward,

keyboardinput.cpp

@@ -249,6 +249,8 @@ keyboard_input::default_bindings() {
         { GLFW_KEY_D },
         // reverserdecrease
         { GLFW_KEY_R },
+        // reverserforwardhigh
+        { -1 },
         // reverserforward
         { -1 },
         // reverserneutral

material.cpp

@@ -14,14 +14,6 @@ http://mozilla.org/MPL/2.0/.
 #include "utilities.h"
 #include "globals.h"
 
-// helper, returns potential path part from provided file name
-std::string path( std::string const &Filename ) {
-    return (
-        Filename.rfind( '/' ) != std::string::npos ?
-            Filename.substr( 0, Filename.rfind( '/' ) + 1 ) :
-            "" );
-}
-
 bool
 opengl_material::deserialize( cParser &Input, bool const Loadnow ) {
 

utilities.cpp

@@ -377,3 +377,13 @@ replace_slashes( std::string &Filename ) {
         std::begin( Filename ), std::end( Filename ),
         '\\', '/' );
 }
+
+// returns potential path part from provided file name
+std::string
+substr_path( std::string const &Filename ) {
+
+    return (
+        Filename.rfind( '/' ) != std::string::npos ?
+            Filename.substr( 0, Filename.rfind( '/' ) + 1 ) :
+            "" );
+}

utilities.h

@@ -192,6 +192,9 @@ erase_extension( std::string &Filename );
 void
 replace_slashes( std::string &Filename );
 
+// returns potential path part from provided file name
+std::string substr_path( std::string const &Filename );
+
 template <typename Type_>
 void SafeDelete( Type_ &Pointer ) {
     delete Pointer;
@@ -229,6 +232,8 @@ template <typename Type_>
 Type_
 min_speed( Type_ const Left, Type_ const Right ) {
 
+    if( Left == Right ) { return Left; }
+
     return std::min(
         ( Left != -1 ?
             Left :

version.h

@@ -1,5 +1,5 @@
 #pragma once
 
 #define VERSION_MAJOR 18
-#define VERSION_MINOR 527
+#define VERSION_MINOR 531
 #define VERSION_REVISION 0