Merge branch 'tmj-dev' into milek-dev

Driver.cpp

@@ -1390,6 +1390,12 @@ TCommandType TController::TableUpdate(double &fVelDes, double &fDist, double &fN
                             fVelDes = v;
                         }
                     }
+                    if( ( true == TestFlag( sSpeedTable[ i ].iFlags, spEnd ) )
+                     && ( mvOccupied->CategoryFlag & 1 ) ) {
+                        // if the railway track ends here set the velnext accordingly as well
+                        // TODO: test this with turntables and such
+                        fNext = 0.0;
+                    }
                 }
                 else if (sSpeedTable[i].iFlags & spTrack) // jeśli tor
                 { // tor ogranicza prędkość, dopóki cały skład nie przejedzie,
@@ -1401,12 +1407,6 @@ TCommandType TController::TableUpdate(double &fVelDes, double &fDist, double &fN
                         // ograniczenie aktualnej prędkości aż do wyjechania za ograniczenie
                         fVelDes = v;
                     }
-                    if( ( sSpeedTable[ i ].iFlags & spEnd )
-                     && ( mvOccupied->CategoryFlag & 1 ) ) {
-                        // if the railway track ends here set the velnext accordingly as well
-                        // TODO: test this with turntables and such
-                        fNext = 0.0;
-                    }
                     // if (v==0.0) fAcc=-0.9; //hamowanie jeśli stop
                     continue; // i tyle wystarczy
                 }
@@ -2131,7 +2131,10 @@ bool TController::CheckVehicles(TOrders user)
                     // NOTE: don't set battery in the occupied vehicle, let the user/ai do it explicitly
                     p->MoverParameters->BatterySwitch( true );
                 }
+            }
             // enable heating and converter in carriages with can be heated
+            // NOTE: don't touch the controlled vehicle, let the user/ai handle it explicitly
+            if( p->MoverParameters != mvControlling ) {
                 if( p->MoverParameters->HeatingPower > 0 ) {
                     p->MoverParameters->HeatingAllow = true;
                     p->MoverParameters->ConverterSwitch( true, range_t::local );
@@ -2266,6 +2269,12 @@ bool TController::CheckVehicles(TOrders user)
             // zmiana czoła przez manewry
             iDrivigFlags &= ~movePushPull;
         }
+
+        if( ( user == Connect )
+         || ( user == Disconnect ) ) {
+            // HACK: force route table update on consist change, new consist length means distances to points of interest are now wrong
+            iTableDirection = 0;
+        }
     } // blok wykonywany, gdy aktywnie prowadzi
     return true;
 }
@@ -2454,7 +2463,7 @@ bool TController::PrepareEngine()
             mvOccupied->PantRear( true );
             if (mvControlling->PantPress < 4.2) {
                 // załączenie małej sprężarki
-                if( mvControlling->TrainType != dt_EZT ) {
+                if( false == mvControlling->PantAutoValve ) {
                     // odłączenie zbiornika głównego, bo z nim nie da rady napompować
                     mvControlling->bPantKurek3 = false;
                 }
@@ -2527,14 +2536,14 @@ bool TController::PrepareEngine()
             }
             else { 
                 OK = ( OrderDirectionChange( iDirection, mvOccupied ) == -1 );
-                mvOccupied->ConverterSwitch( true );
+                mvControlling->ConverterSwitch( true );
                 // w EN57 sprężarka w ra jest zasilana z silnikowego
-                mvOccupied->CompressorSwitch( true );
+                mvControlling->CompressorSwitch( true );
                 // enable motor blowers
-                mvOccupied->MotorBlowersSwitchOff( false, end::front );
+                mvControlling->MotorBlowersSwitchOff( false, end::front );
-                mvOccupied->MotorBlowersSwitch( true, end::front );
+                mvControlling->MotorBlowersSwitch( true, end::front );
-                mvOccupied->MotorBlowersSwitchOff( false, end::rear );
+                mvControlling->MotorBlowersSwitchOff( false, end::rear );
-                mvOccupied->MotorBlowersSwitch( true, end::rear );
+                mvControlling->MotorBlowersSwitch( true, end::rear );
                 // enable train brake if it's off
                 if( mvOccupied->fBrakeCtrlPos == mvOccupied->Handle->GetPos( bh_NP ) ) {
                     mvOccupied->BrakeLevelSet( mvOccupied->Handle->GetPos( bh_RP ) );
@@ -2548,6 +2557,14 @@ bool TController::PrepareEngine()
                 if( lookup != brakepositions.end() ) {
                     BrakeLevelSet( lookup->second ); // GBH
                 }
+                // enable train heating
+                // HACK: to account for su-45/-46 shortcomings diesel-powered engines only activate heating in cold conditions
+                // TODO: take instead into account presence of converters in attached cars, once said presence is possible to specify
+                mvControlling->HeatingAllow = (
+                    ( ( mvControlling->EngineType == TEngineType::DieselElectric )
+                   || ( mvControlling->EngineType == TEngineType::DieselEngine ) ) ?
+                        ( Global.AirTemperature < 10 ) :
+                        true );
             }
         }
         else
@@ -2630,7 +2647,9 @@ bool TController::ReleaseEngine() {
         mvOccupied->OperateDoors( side::left, false );
 
         if( true == mvControlling->Mains ) {
-            mvControlling->CompressorSwitch( false );
+            // heating
+            mvControlling->HeatingAllow = false;
+            // devices
             mvControlling->ConverterSwitch( false );
             // line breaker/engine
             OK = mvControlling->MainSwitch( false );
@@ -3129,6 +3148,14 @@ bool TController::IncSpeed()
         { // dla 2Ls150 można zmienić tryb pracy, jeśli jest w liniowym i nie daje rady (wymaga zerowania kierunku)
             // mvControlling->ShuntMode=(OrderList[OrderPos]&Shunt)||(fMass>224000.0);
         }
+		if (mvControlling->EIMCtrlType > 0) {
+			if (true == Ready)
+			{
+				DizelPercentage = (mvControlling->Vel > mvControlling->dizel_minVelfullengage ? 100 : 1);
+			}
+			break;
+		}
+		else
         if( true == Ready ) {
             if( ( mvControlling->Vel > mvControlling->dizel_minVelfullengage )
              && ( mvControlling->RList[ mvControlling->MainCtrlPos ].Mn > 0 ) ) {
@@ -3191,6 +3218,12 @@ bool TController::DecSpeed(bool force)
             mvControlling->DecMainCtrl(3 + 3 * floor(0.5 + fabs(AccDesired)));
         break;
     case TEngineType::DieselEngine:
+		if (mvControlling->EIMCtrlType > 0)
+		{
+			DizelPercentage = 0;
+			break;
+		}
+
         if ((mvControlling->Vel > mvControlling->dizel_minVelfullengage))
         {
             if (mvControlling->RList[mvControlling->MainCtrlPos].Mn > 0)
@@ -3514,6 +3547,64 @@ void TController::SetTimeControllers()
 		}
 	}
 	//5. Check Main Controller in Dizels
+	//5.1. Digital controller in DMUs with hydro
+	if ((mvControlling->EngineType == TEngineType::DieselEngine) && (mvControlling->EIMCtrlType == 3))
+	{
+
+        DizelPercentage_Speed = DizelPercentage; //wstepnie procenty
+		auto MinVel{ std::min(mvControlling->hydro_TC_LockupSpeed, mvControlling->Vmax / 6) }; //minimal velocity
+		if (VelDesired > MinVel) //more power for faster ride
+		{
+			auto const Factor{ 10 * (mvControlling->Vmax) / (mvControlling->Vmax + 3 * mvControlling->Vel) };
+			auto DesiredPercentage{ clamp(
+				(VelDesired > mvControlling->Vel ?
+					(VelDesired - mvControlling->Vel) / Factor :
+					0),
+				0.0, 1.0) }; //correction for reaching desired velocity
+			if ((VelDesired < 0.5 * mvControlling->Vmax) //low velocity and reaching desired 
+				&& (VelDesired - mvControlling->Vel < 10)) {
+				DesiredPercentage = std::min(DesiredPercentage, 0.75);
+			}
+			DizelPercentage_Speed = std::round(DesiredPercentage * DizelPercentage);
+		}
+		else
+		{
+			DizelPercentage_Speed = std::min(DizelPercentage, mvControlling->Vel < 0.99 * VelDesired ? 1 : 0);
+		}
+
+        auto const DizelActualPercentage { int(100.4 * mvControlling->eimic_real) };
+
+        auto const PosInc { mvControlling->MainCtrlPosNo };
+        auto PosDec { 0 };
+        for( int i = PosInc; i >= 0; --i ) {
+            if( ( mvControlling->UniCtrlList[ i ].SetCtrlVal <= 0 )
+             && ( mvControlling->UniCtrlList[ i ].SpeedDown > 0.01 ) ) {
+                PosDec = i;
+                break;
+            }
+        }
+
+        if( std::abs( DizelPercentage_Speed - DizelActualPercentage ) > ( DizelPercentage > 1 ? 0 : 0 ) ) {
+
+            if( ( PosDec > 0 )
+             && ( ( DizelActualPercentage - DizelPercentage_Speed > 50 )
+               || ( ( DizelPercentage_Speed == 0 )
+                 && ( DizelActualPercentage > 10 ) ) ) ) {
+                //one position earlier should be fast decreasing
+                PosDec -= 1;
+            }
+            auto const DesiredPos { (
+                DizelPercentage_Speed > DizelActualPercentage ?
+                    PosInc :
+                    PosDec ) };
+            while( mvControlling->MainCtrlPos > DesiredPos ) { mvControlling->DecMainCtrl( 1 ); }
+            while( mvControlling->MainCtrlPos < DesiredPos ) { mvControlling->IncMainCtrl( 1 ); }
+		}
+		if (BrakeCtrlPosition < 0.1) //jesli nie hamuje
+			mvOccupied->BrakeLevelSet(mvControlling->UniCtrlList[mvControlling->MainCtrlPos].mode); //zeby nie bruzdzilo machanie zespolonym
+	}
+	else
+	//5.2. Analog direct controller
 	if ((mvControlling->EngineType == TEngineType::DieselEngine)&&(mvControlling->Vmax>30))
 	{
 		int MaxPos = mvControlling->MainCtrlPosNo;
@@ -3573,6 +3664,28 @@ void TController::CheckTimeControllers()
 				mvOccupied->ScndCtrlPos = 2;
 		}
 	}
+
+	//5. Check Main Controller in Dizels
+	//5.1. Digital controller in DMUs with hydro
+	if ((mvControlling->EngineType == TEngineType::DieselEngine) && (mvControlling->EIMCtrlType == 3))
+	{
+		int DizelActualPercentage = 100.4 * mvControlling->eimic_real;
+		int NeutralPos = mvControlling->MainCtrlPosNo - 1; //przedostatnia powinna wstrzymywać - hipoteza robocza
+		for (int i = mvControlling->MainCtrlPosNo; i >= 0; i--)
+			if ((mvControlling->UniCtrlList[i].SetCtrlVal <= 0) && (mvControlling->UniCtrlList[i].SpeedDown < 0.01)) //niby zero, ale nie zmniejsza procentów
+			{
+				NeutralPos = i;
+				break;
+			}
+		if (BrakeCtrlPosition < 0.1) //jesli nie hamuje
+		{
+			if ((DizelActualPercentage >= DizelPercentage_Speed) && (mvControlling->MainCtrlPos > NeutralPos))
+				while (mvControlling->MainCtrlPos > NeutralPos) mvControlling->DecMainCtrl(1);
+			if ((DizelActualPercentage <= DizelPercentage_Speed) && (mvControlling->MainCtrlPos < NeutralPos))
+				while (mvControlling->MainCtrlPos < NeutralPos) mvControlling->IncMainCtrl(1);
+			mvOccupied->BrakeLevelSet(mvControlling->UniCtrlList[mvControlling->MainCtrlPos].mode); //zeby nie bruzdzilo machanie zespolonym
+		}
+	}
 };
 
 // otwieranie/zamykanie drzwi w składzie albo (tylko AI) EZT
@@ -4704,7 +4817,7 @@ TController::UpdateSituation(double dt) {
                         iCoupler = 0; // dalsza jazda manewrowa już bez łączenia
                         iDrivigFlags &= ~moveConnect; // zdjęcie flagi doczepiania
                         SetVelocity( 0, 0, stopJoin ); // wyłączyć przyspieszanie
-                        CheckVehicles(); // sprawdzić światła nowego składu
+                        CheckVehicles( Connect ); // sprawdzić światła nowego składu
                         JumpToNextOrder(); // wykonanie następnej komendy
                     }
                 }
@@ -5071,6 +5184,7 @@ TController::UpdateSituation(double dt) {
                             // tylko jeśli odepnie
                             WriteLog( mvOccupied->Name + " odczepiony." );
                             iVehicleCount = -2;
+                            CheckVehicles( Disconnect ); // update trainset state
                         } // a jak nie, to dociskać dalej
                     }
                     if ((mvOccupied->Vel < 0.01) && !(iDrivigFlags & movePress))
@@ -5078,6 +5192,7 @@ TController::UpdateSituation(double dt) {
                         // za radą yB ustawiamy pozycję 3 kranu (ruszanie kranem w innych miejscach
                         // powino zostać wyłączone)
                         // WriteLog("Zahamowanie składu");
+                        AccDesired = std::min( AccDesired, -0.9 ); // HACK: make sure the ai doesn't try to release the brakes to accelerate
                         if( mvOccupied->BrakeSystem == TBrakeSystem::ElectroPneumatic ) {
                             mvOccupied->BrakeLevelSet( mvOccupied->Handle->GetPos( bh_EPB ) );
                         }
@@ -5325,7 +5440,8 @@ TController::UpdateSituation(double dt) {
                     exchangetime = std::max( exchangetime, vehicle->LoadExchangeTime() );
                     vehicle = vehicle->Next();
                 }
-                if( exchangetime > 0 ) {
+                if( ( exchangetime > 0 )
+                 || ( mvOccupied->Vel > 2.0 ) ) { // HACK: force timer reset if the load exchange is cancelled due to departure
                     WaitingSet( exchangetime );
                 }
             }

Driver.h

@@ -256,6 +256,8 @@ public:
     int iOverheadZero = 0; // suma bitowa jezdy bezprądowej, bity ustawiane przez pojazdy z podniesionymi pantografami
     int iOverheadDown = 0; // suma bitowa opuszczenia pantografów, bity ustawiane przez pojazdy z podniesionymi pantografami
     double BrakeCtrlPosition = 0.0; // intermediate position of main brake controller 
+	int DizelPercentage = 0; // oczekiwane procenty jazdy/hamowania szynobusem
+	int DizelPercentage_Speed = 0; // oczekiwane procenty jazdy/hamowania szynobusem w związku z osiąganiem VelDesired
 private:
     bool Psyche = false;
     int HelperState = 0; //stan pomocnika maszynisty

DynObj.cpp

@@ -2703,10 +2703,11 @@ bool TDynamicObject::Update(double dt, double dt1)
             if (v == 0.0) {
                 v = MoverParameters->PantFrontVolt;
                 if( v == 0.0 ) {
-                    if( MoverParameters->TrainType & ( dt_EZT | dt_ET40 | dt_ET41 | dt_ET42 ) ) {
+//                    if( MoverParameters->TrainType & ( dt_EZT | dt_ET40 | dt_ET41 | dt_ET42 ) ) {
                         // dwuczłony mogą mieć sprzęg WN
+                        // NOTE: condition disabled, other vehicles types can have power cables as well
                         v = MoverParameters->GetTrainsetVoltage(); // ostatnia szansa
-                    }
+//                    }
                 }
             }
             if (v != 0.0)
@@ -2759,6 +2760,13 @@ bool TDynamicObject::Update(double dt, double dt1)
     if (Mechanik)
     { // Ra 2F3F: do Driver.cpp to przenieść?
         MoverParameters->EqvtPipePress = GetEPP(); // srednie cisnienie w PG
+		if ((Mechanik->Primary())
+			&& (MoverParameters->EngineType == TEngineType::DieselEngine)
+			&& (MoverParameters->EIMCtrlType > 0)) {
+			MoverParameters->CheckEIMIC(dt1);
+			MoverParameters->eimic_real = MoverParameters->eimic;
+			MoverParameters->SendCtrlToNext("EIMIC", MoverParameters->eimic, MoverParameters->CabNo);
+		}
 		if( ( Mechanik->Primary() )
          && ( MoverParameters->EngineType == TEngineType::ElectricInductionMotor ) ) {
             // jesli glowny i z asynchronami, to niech steruje hamulcem i napedem lacznie dla calego pociagu/ezt
@@ -5772,23 +5780,28 @@ TDynamicObject::LoadMMediaFile_mdload( std::string const &Name ) const {
     TModel3d *loadmodel { nullptr };
 
     // check if we don't have model override for this load type
+    {
         auto const lookup { LoadModelOverrides.find( Name ) };
         if( lookup != LoadModelOverrides.end() ) {
             loadmodel = TModelsManager::GetModel( asBaseDir + lookup->second, true );
             // if the override was succesfully loaded call it a day
             if( loadmodel != nullptr ) { return loadmodel; }
         }
+    }
     // regular routine if there's no override or it couldn't be loaded
     // try first specialized version of the load model, vehiclename_loadname
+    {
         auto const specializedloadfilename { asBaseDir + MoverParameters->TypeName + "_" + Name };
-    if( ( true == FileExists( specializedloadfilename + ".e3d" ) )
+        loadmodel = TModelsManager::GetModel( specializedloadfilename, true, false );
-     || ( true == FileExists( specializedloadfilename + ".t3d" ) ) ) {
+        if( loadmodel != nullptr ) { return loadmodel; }
-        loadmodel = TModelsManager::GetModel( specializedloadfilename, true );
     }
-    if( loadmodel == nullptr ) {
+    // try generic version of the load model next, loadname
-        // if this fails, try generic load model
+    {
-        loadmodel = TModelsManager::GetModel( asBaseDir + Name, true );
+        auto const genericloadfilename { asBaseDir + Name };
+        loadmodel = TModelsManager::GetModel( genericloadfilename, true, false );
+        if( loadmodel != nullptr ) { return loadmodel; }
     }
+    // if we're still here, give up
     return loadmodel;
 }
 
@@ -6630,7 +6643,7 @@ TDynamicObject::powertrain_sounds::render( TMoverParameters const &Vehicle, doub
     // youBy - przenioslem, bo diesel tez moze miec turbo
     if( Vehicle.TurboTest > 0 ) {
         // udawanie turbo:
-		auto const pitch_diesel { Vehicle.EngineType == TEngineType::DieselEngine ? Vehicle.enrot / Vehicle.dizel_nmax : 0 };
+		auto const pitch_diesel { Vehicle.EngineType == TEngineType::DieselEngine ? Vehicle.enrot / Vehicle.dizel_nmax : 1 };
         auto const goalpitch { std::max( 0.025, ( engine_volume * pitch_diesel + engine_turbo.m_frequencyoffset ) * engine_turbo.m_frequencyfactor ) };
         auto const goalvolume { (
             ( ( Vehicle.MainCtrlPos >= Vehicle.TurboTest ) && ( Vehicle.enrot > 0.1 ) ) ?

EvLaunch.cpp

@@ -58,12 +58,25 @@ bool TEventLauncher::Load(cParser *parser)
         dRadius *= dRadius; // do kwadratu, pod warunkiem, że nie jest ujemne
     parser->getTokens(); // klawisz sterujący
     *parser >> token;
-    if (token != "none")
+    if (token != "none") {
-    {
+
-        if( token.size() == 1 )
+        if( token.size() == 1 ) {
+            // single char, assigned activation key
             iKey = vk_to_glfw_key( token[ 0 ] );
-        else
+        }
-            iKey = vk_to_glfw_key(stol_def( token, 0 )); // a jak więcej, to jakby numer klawisza jest
+        else {
+            // this launcher may be activated by radio message
+            std::map<std::string, int> messages {
+                { "radio_call1", radio_message::call1 },
+                { "radio_call3", radio_message::call3 }
+            };
+            auto lookup = messages.find( token );
+            iKey = (
+                lookup != messages.end() ?
+                    lookup->second :
+                    // a jak więcej, to jakby numer klawisza jest
+                    vk_to_glfw_key( stol_def( token, 0 ) ) );
+        }
     }
     parser->getTokens();
     *parser >> DeltaTime;
@@ -141,7 +154,7 @@ bool TEventLauncher::check_activation() {
 
     auto bCond { false };
 
-    if( iKey != 0 ) {
+    if( iKey > 0 ) {
         if( iKey > 255 ) {
             // key and modifier
             auto const modifier = ( iKey & 0xff00 ) >> 8;
@@ -205,6 +218,11 @@ bool TEventLauncher::IsGlobal() const {
           && ( dRadius < 0.0 ) ); // bez ograniczenia zasięgu
 }
 
+bool TEventLauncher::IsRadioActivated() const {
+
+    return ( iKey < 0 );
+}
+
 // radius() subclass details, calculates node's bounding radius
 float
 TEventLauncher::radius_() {

EvLaunch.h

@@ -14,6 +14,12 @@ http://mozilla.org/MPL/2.0/.
 #include "Classes.h"
 #include "scenenode.h"
 
+// radio-transmitted event launch messages
+enum radio_message {
+    call3 = -3,
+    call1 = -1
+};
+
 class TEventLauncher : public scene::basic_node {
 
 public:
@@ -27,7 +33,11 @@ public:
     bool check_activation();
     // checks conditions associated with the event. returns: true if the conditions are met
     bool check_conditions();
+    inline
+    auto key() const {
+        return iKey; }
     bool IsGlobal() const;
+    bool IsRadioActivated() const;
 // members
     std::string asEvent1Name;
     std::string asEvent2Name;

Event.cpp

@@ -1034,7 +1034,7 @@ logvalues_event::export_as_text_( std::ostream &Output ) const {
 void
 multi_event::init() {
 
-    auto const conditiontchecksmemcell { m_conditions.flags & ( flags::text | flags::value_1 | flags::value_2 ) };
+    auto const conditiontchecksmemcell { ( m_conditions.flags & ( flags::text | flags::value_1 | flags::value_2 ) ) != 0 };
     // not all multi-events have memory cell checks, for the ones which don't we can keep quiet about it
     init_targets( simulation::Memory, "memory cell", conditiontchecksmemcell );
     if( m_ignored ) {
@@ -1974,6 +1974,22 @@ event_manager::queue( TEventLauncher *Launcher ) {
     m_launcherqueue.emplace_back( Launcher );
 }
 
+// inserts in the event query events assigned to event launchers capable of receiving specified radio message sent from specified location
+void
+event_manager::queue_receivers( radio_message const Message, glm::dvec3 const &Location ) {
+
+    for( auto *launcher : m_radiodrivenlaunchers.sequence() ) {
+        if( ( launcher->key() == Message )
+         && ( ( launcher->dRadius < 0 )
+           || ( glm::length2( launcher->location() - Location ) < launcher->dRadius ) )
+         && ( true == launcher->check_conditions() ) ) {
+            // NOTE: only execution of event1 is supported for radio messages
+            // TBD, TODO: consider ability/way to execute event2
+            simulation::Events.AddToQuery( launcher->Event1, nullptr );
+        }
+    }
+}
+
 // legacy method, updates event queues
 void
 event_manager::update() {
@@ -2177,7 +2193,13 @@ event_manager::InitEvents() {
 void
 event_manager::InitLaunchers() {
 
-    for( auto *launcher : m_launchers.sequence() ) {
+    std::vector<basic_table<TEventLauncher> *> launchertables {
+        &m_inputdrivenlaunchers,
+        &m_radiodrivenlaunchers
+    };
+
+    for( auto *launchertable : launchertables ) {
+        for( auto *launcher : launchertable->sequence() ) {
 
             if( launcher->iCheckMask != 0 ) {
                 if( launcher->asMemCellName != "none" ) {
@@ -2207,6 +2229,7 @@ event_manager::InitLaunchers() {
             }
         }
     }
+}
 
 // sends basic content of the class in legacy (text) format to provided stream
 void
@@ -2218,8 +2241,14 @@ event_manager::export_as_text( std::ostream &Output ) const {
             event->export_as_text( Output );
         }
     }
-    Output << "// event launchers\n";
+    Output << "// event launchers, basic\n";
-    for( auto const *launcher : m_launchers.sequence() ) {
+    for( auto const *launcher : m_inputdrivenlaunchers.sequence() ) {
+        if( launcher->group() == null_handle ) {
+            launcher->export_as_text( Output );
+        }
+    }
+    Output << "// event launchers, radio driven\n";
+    for( auto const *launcher : m_radiodrivenlaunchers.sequence() ) {
         if( launcher->group() == null_handle ) {
             launcher->export_as_text( Output );
         }

Event.h

@@ -576,6 +576,9 @@ public:
     // adds specified event launcher to the list of global launchers
     void
         queue( TEventLauncher *Launcher );
+    // inserts in the event query events assigned to event launchers capable of receiving specified radio message sent from specified location
+    void
+        queue_receivers( radio_message const Message, glm::dvec3 const &Location );
     // legacy method, updates event queues
     void
         update();
@@ -586,7 +589,10 @@ public:
     inline
     bool
         insert( TEventLauncher *Launcher ) {
-            return m_launchers.insert( Launcher ); }
+            return (
+                Launcher->IsRadioActivated() ?
+                    m_radiodrivenlaunchers.insert( Launcher ) :
+                    m_inputdrivenlaunchers.insert( Launcher ) ); }
     // returns first event in the queue
     inline
     basic_event *
@@ -626,7 +632,8 @@ private:
     basic_event *QueryRootEvent { nullptr };
     basic_event *m_workevent { nullptr };
     event_map m_eventmap;
-    basic_table<TEventLauncher> m_launchers;
+    basic_table<TEventLauncher> m_inputdrivenlaunchers;
+    basic_table<TEventLauncher> m_radiodrivenlaunchers;
     eventlauncher_sequence m_launcherqueue;
 };
 

Gauge.cpp

@@ -183,6 +183,7 @@ TGauge::Load_mapping( cParser &Input ) {
         m_type = (
             gaugetype == "impulse" ? TGaugeType::push :
             gaugetype == "return" ? TGaugeType::push :
+            gaugetype == "delayed" ? TGaugeType::push_delayed :
             TGaugeType::toggle ); // default
     }
     else if( key == "soundinc:" ) {

Gauge.h

@@ -23,7 +23,8 @@ enum class TGaugeAnimation {
 
 enum class TGaugeType {
     toggle,
-    push
+    push,
+    push_delayed
 };
 
 // animowany wskaźnik, mogący przyjmować wiele stanów pośrednich

Globals.cpp

@@ -58,7 +58,7 @@ global_settings::ConfigParse(cParser &Parser) {
             Parser.getTokens( 1, false );
             Parser >> FieldOfView;
             // guard against incorrect values
-            FieldOfView = clamp( FieldOfView, 15.0f, 75.0f );
+            FieldOfView = clamp( FieldOfView, 10.0f, 75.0f );
         }
         else if (token == "width")
         {
@@ -370,6 +370,11 @@ global_settings::ConfigParse(cParser &Parser) {
                 >> shadowtune.depth
                 >> shadowtune.distance;
         }
+        else if( token == "gfx.shadows.cab.range" ) {
+            // shadow render toggle
+            Parser.getTokens();
+            Parser >> RenderCabShadowsRange;
+        }
         else if (token == "smoothtraction")
         {
             // podwójna jasność ambient

Globals.h

@@ -112,6 +112,7 @@ struct global_settings {
     bool ScaleSpecularValues{ true };
     bool BasicRenderer{ false };
     bool RenderShadows{ true };
+    int RenderCabShadowsRange{ 0 };
     struct shadowtune_t {
         unsigned int map_size{ 2048 };
         float width{ 250.f }; // no longer used

McZapkie/MOVER.h

@@ -387,7 +387,7 @@ struct TBrakePressure
 typedef std::map<int,TBrakePressure> TBrakePressureTable;
 
 /*typy napedow*/
-enum class TEngineType { None, Dumb, WheelsDriven, ElectricSeriesMotor, ElectricInductionMotor, DieselEngine, SteamEngine, DieselElectric };
+enum class TEngineType { None, Dumb, WheelsDriven, ElectricSeriesMotor, ElectricInductionMotor, DieselEngine, SteamEngine, DieselElectric, Main };
 /*postac dostarczanej energii*/
 enum class TPowerType { NoPower, BioPower, MechPower, ElectricPower, SteamPower };
 /*rodzaj paliwa*/
@@ -440,10 +440,22 @@ struct TCurrentCollector {
     //}
 };
 /*typy źródeł mocy*/
-enum class TPowerSource { NotDefined, InternalSource, Transducer, Generator, Accumulator, CurrentCollector, PowerCable, Heater };
+enum class TPowerSource { NotDefined, InternalSource, Transducer, Generator, Accumulator, CurrentCollector, PowerCable, Heater, Main };
 
+struct engine_generator {
+    // ld inputs
+    double *engine_revolutions; // revs per second of the prime mover
+    // config
+    double revolutions_min; // min working revolutions rate, in revs per second
+    double revolutions_max; // max working revolutions rate, in revs per second
+    double voltage_min; // voltage generated at min working revolutions
+    double voltage_max; // voltage generated at max working revolutions
+    // ld outputs
+    double revolutions;
+    double voltage;
+};
 
-struct _mover__1
+struct TAccumulator
 {
 	double MaxCapacity;
 	TPowerSource RechargeSource;
@@ -453,7 +465,7 @@ struct _mover__1
     //}
 };
 
-struct _mover__2
+struct TPowerCable
 {
 	TPowerType PowerTrans;
 	double SteamPressure;
@@ -463,12 +475,17 @@ struct _mover__2
     //}
 };
 
-struct _mover__3
+struct THeater
 {
 	TGrateType Grate;
 	TBoilerType Boiler;
 };
 
+struct TTransducer {
+    // ld inputs
+    double InputVoltage;
+};
+
 /*parametry źródeł mocy*/
 struct TPowerParameters
 {
@@ -480,11 +497,11 @@ struct TPowerParameters
 	{
 		struct
 		{
-			_mover__3 RHeater;
+			THeater RHeater;
 		};
 		struct
 		{
-			_mover__2 RPowerCable;
+			TPowerCable RPowerCable;
 		};
 		struct
 		{
@@ -492,15 +509,15 @@ struct TPowerParameters
 		};
 		struct
 		{
-			_mover__1 RAccumulator;
+			TAccumulator RAccumulator;
 		};
 		struct
 		{
-			TEngineType GeneratorEngine;
+			engine_generator EngineGenerator;
 		};
 		struct
 		{
-			double InputVoltage;
+			TTransducer Transducer;
 		};
 		struct
 		{
@@ -618,7 +635,8 @@ enum class TCouplerType { NoCoupler, Articulated, Bare, Chain, Screw, Automatic
 struct power_coupling {
     double current{ 0.0 };
     double voltage{ 0.0 };
-    bool local{ false }; // whether the power comes from external or onboard source
+    bool is_local{ false }; // whether the power comes from external or onboard source
+    bool is_live{ false }; // whether the coupling with next vehicle is live
 };
 
 struct TCoupling {
@@ -1022,7 +1040,11 @@ public:
 						 /*                dizel_auto_min, dizel_auto_max: real; {predkosc obrotowa przelaczania automatycznej skrzyni biegow*/
 	double dizel_nmax_cutoff = 0.0; /*predkosc obrotowa zadzialania ogranicznika predkosci*/
 	double dizel_nmin = 0.0; /*najmniejsza dopuszczalna predkosc obrotowa*/
+	double dizel_nmin_hdrive = 0.0; /*najmniejsza dopuszczalna predkosc obrotowa w czasie jazdy na hydro */
+	double dizel_nmin_hdrive_factor = 0.0; /*wspolczynnik wzrostu obrotow minimalnych hydro zaleznosci od zadanego procentu*/
+	double dizel_nmin_retarder = 0.0; /*obroty pracy podczas hamowania retarderem*/
 	double dizel_minVelfullengage = 0.0; /*najmniejsza predkosc przy jezdzie ze sprzeglem bez poslizgu*/
+	double dizel_maxVelANS = 3.0; /*predkosc progowa rozlaczenia przetwornika momentu*/
 	double dizel_AIM = 1.0; /*moment bezwladnosci walu itp*/
 	double dizel_engageDia = 0.5; double dizel_engageMaxForce = 6000.0; double dizel_engagefriction = 0.5; /*parametry sprzegla*/
 	double engagedownspeed = 0.9;
@@ -1050,6 +1072,7 @@ public:
 	double hydro_R_FillRateInc = 1.0; /*szybkosc napelniania sprzegla*/
 	double hydro_R_FillRateDec = 1.0; /*szybkosc oprozniania sprzegla*/
 	double hydro_R_MinVel = 1.0; /*minimalna predkosc, przy ktorej retarder dziala*/
+	double hydro_R_EngageVel = 1.0; /*minimalna predkosc hamowania, przy ktorej sprzeglo jest wciaz wlaczone*/
     /*- dla lokomotyw spalinowo-elektrycznych -*/
 	double AnPos = 0.0; // pozycja sterowania dokladnego (analogowego)
 	bool AnalogCtrl = false; //
@@ -1081,10 +1104,10 @@ public:
 	double MED_EPVC_Time = 7; // czas korekcji sily hamowania EP, gdy nie ma dostepnego ED
 	bool MED_Ncor = 0; // czy korekcja sily hamowania z uwzglednieniem nacisku
 
-	int DCEMUED_CC; //na którym sprzęgu sprawdzać działanie ED
+    int DCEMUED_CC { 0 }; //na którym sprzęgu sprawdzać działanie ED
-	double DCEMUED_EP_max_Vel; //maksymalna prędkość, przy której działa EP przy włączonym ED w jednostce (dla tocznych)
+    double DCEMUED_EP_max_Vel{ 0.0 }; //maksymalna prędkość, przy której działa EP przy włączonym ED w jednostce (dla tocznych)
-	double DCEMUED_EP_min_Im; //minimalny prąd, przy którym EP nie działa przy włączonym ED w członie (dla silnikowych)
+    double DCEMUED_EP_min_Im{ 0.0 }; //minimalny prąd, przy którym EP nie działa przy włączonym ED w członie (dla silnikowych)
-	double DCEMUED_EP_delay; //opóźnienie włączenia hamulca EP przy hamowaniu ED - zwłoka wstępna
+    double DCEMUED_EP_delay{ 0.0 }; //opóźnienie włączenia hamulca EP przy hamowaniu ED - zwłoka wstępna
 
 	/*-dla wagonow*/
     struct load_attributes {
@@ -1225,6 +1248,8 @@ public:
 
     /*-zmienne dla lokomotyw*/
 	bool Mains = false;    /*polozenie glownego wylacznika*/
+    double MainsInitTime{ 0.0 }; // config, initialization time (in seconds) of the main circuit after it receives power, before it can be closed
+    double MainsInitTimeCountdown{ 0.0 }; // current state of main circuit initialization, remaining time (in seconds) until it's ready
 	int MainCtrlPos = 0; /*polozenie glownego nastawnika*/
 	int ScndCtrlPos = 0; /*polozenie dodatkowego nastawnika*/
 	int LightsPos = 0;
@@ -1290,6 +1315,7 @@ public:
 	double dizel_engagedeltaomega = 0.0;    /*roznica predkosci katowych tarcz sprzegla*/
 	double dizel_n_old = 0.0; /*poredkosc na potrzeby obliczen sprzegiel*/
 	double dizel_Torque = 0.0; /*poredkosc na potrzeby obliczen sprzegiel*/
+	double dizel_nreg_min = 0.0; /*predkosc regulatora minimalna, zmienna w hydro*/
 
 	/* - zmienne dla przetowrnika momentu */
 	double hydro_TC_Fill = 0.0; /*napelnienie*/
@@ -1370,6 +1396,7 @@ public:
 
 	double fBrakeCtrlPos = -2.0; // płynna nastawa hamulca zespolonego
 	bool bPantKurek3 = true; // kurek trójdrogowy (pantografu): true=połączenie z ZG, false=połączenie z małą sprężarką // domyślnie zbiornik pantografu połączony jest ze zbiornikiem głównym
+    bool PantAutoValve { false }; // type of installed pantograph compressor valve
 	int iProblem = 0; // flagi problemów z taborem, aby AI nie musiało porównywać; 0=może jechać
 	int iLights[2]; // bity zapalonych świateł tutaj, żeby dało się liczyć pobór prądu
 
@@ -1503,6 +1530,8 @@ public:
     bool CompressorSwitch( bool State, range_t const Notify = range_t::consist );/*! wl/wyl sprezarki*/
 
 									  /*-funkcje typowe dla lokomotywy elektrycznej*/
+    void MainsCheck( double const Deltatime );
+    void PowerCouplersCheck( double const Deltatime );
     void ConverterCheck( double const Timestep ); // przetwornica
     void HeatingCheck( double const Timestep );
     void WaterPumpCheck( double const Timestep );
@@ -1543,8 +1572,9 @@ public:
 	bool dizel_EngageSwitch(double state);
 	bool dizel_EngageChange(double dt);
 	bool dizel_AutoGearCheck(void);
-	double dizel_fillcheck(int mcp);
+	double dizel_fillcheck(int mcp, double dt);
 	double dizel_Momentum(double dizel_fill, double n, double dt);
+	double dizel_MomentumRetarder(double n, double dt);  // moment hamowania retardera
     void dizel_HeatSet( float const Value );
     void dizel_Heat( double const dt );
     bool dizel_StartupCheck();

McZapkie/Mover.cpp

@@ -673,7 +673,7 @@ void TMoverParameters::UpdatePantVolume(double dt)
         // Ra 2014-07: kurek trójdrogowy łączy spr.pom. z pantografami i wyłącznikiem ciśnieniowym WS
         // Ra 2014-07: zbiornika rozrządu nie pompuje się tu, tylko pantografy; potem można zamknąć
         // WS i odpalić resztę
-        if ((TrainType == dt_EZT) ?
+        if (PantAutoValve ?
             (PantPress < ScndPipePress) :
             bPantKurek3) // kurek zamyka połączenie z ZG
         { // zbiornik pantografu połączony ze zbiornikiem głównym - małą sprężarką się tego nie napompuje
@@ -1070,85 +1070,6 @@ double TMoverParameters::ComputeMovement(double dt, double dt1, const TTrackShap
     const double Vepsilon = 1e-5;
     const double  Aepsilon = 1e-3; // ASBSpeed=0.8;
 
-    // T_MoverParameters::ComputeMovement(dt, dt1, Shape, Track, ElectricTraction, NewLoc, NewRot);
-    // // najpierw kawalek z funkcji w pliku mover.pas
-	TotalCurrent = 0;
-    double hvc =
-        std::max(
-            std::max(
-                PantFrontVolt,
-                PantRearVolt ),
-            ElectricTraction.TractionVoltage * 0.9 );
-
-    for( int side = 0; side < 2; ++side ) {
-        // przekazywanie napiec
-        auto const oppositeside { ( side == end::front ? end::rear : end::front ) };
-        auto const liveconnection{
-            ( Couplers[ side ].CouplingFlag & ctrain_power )
-            || ( ( Couplers[ side ].CouplingFlag & ctrain_heating )
-              && ( Couplers[ side ].Connected->Heating ) ) };
-
-        if( liveconnection ) {
-            auto const &connectedcoupler = Couplers[ side ].Connected->Couplers[ Couplers[ side ].ConnectedNr ];
-            Couplers[ oppositeside ].power_high.voltage =
-                std::max(
-                    std::abs( hvc ),
-                    connectedcoupler.power_high.voltage - Couplers[ side ].power_high.current * 0.02 );
-        }
-        else {
-            Couplers[ oppositeside ].power_high.voltage = std::abs( hvc ) - Couplers[ side ].power_high.current * 0.02;
-        }
-    }
-
-    hvc = Couplers[ end::front ].power_high.voltage + Couplers[ end::rear ].power_high.voltage;
-
-    if( std::abs( PantFrontVolt ) + std::abs( PantRearVolt ) < 1.0 ) {
-        // bez napiecia...
-        if( hvc != 0.0 ) {
-            // ...ale jest cos na sprzegach:
-            // przekazywanie pradow
-            for( int side = 0; side < 2; ++side ) {
-
-                Couplers[ side ].power_high.local = false; // power, if any, will be from external source
-
-                if( ( Couplers[ side ].CouplingFlag & ctrain_power )
-                 || ( ( Couplers[ side ].CouplingFlag & ctrain_heating )
-                   && ( Couplers[ side ].Connected->Heating ) ) ) {
-                    auto const &connectedcoupler =
-                        Couplers[ side ].Connected->Couplers[
-                            ( Couplers[ side ].ConnectedNr == end::front ?
-                                end::rear :
-                                end::front ) ];
-                    Couplers[ side ].power_high.current =
-                        connectedcoupler.power_high.current
-                        + Itot * Couplers[ side ].power_high.voltage / hvc; // obciążenie rozkladane stosownie do napiec
-                }
-			    else {
-                    Couplers[ side ].power_high.current = Itot * Couplers[ side ].power_high.voltage / hvc;
-                }
-            }
-        }
-	}
-	else
-	{
-        for( int side = 0; side < 2; ++side ) {
-
-            Couplers[ side ].power_high.local = true; // power is coming from local pantographs
-
-            if( ( Couplers[ side ].CouplingFlag & ctrain_power )
-             || ( ( Couplers[ side ].CouplingFlag & ctrain_heating )
-               && ( Couplers[ side ].Connected->Heating ) ) ) {
-                auto const &connectedcoupler =
-                    Couplers[ side ].Connected->Couplers[
-                        ( Couplers[ side ].ConnectedNr == end::front ?
-                            end::rear :
-                            end::front ) ];
-                TotalCurrent += connectedcoupler.power_high.current;
-                Couplers[ side ].power_high.current = 0.0;
-            }
-        }
-	}
-
     if (!TestFlag(DamageFlag, dtrain_out))
     { // Ra: to przepisywanie tu jest bez sensu
         RunningShape = Shape;
@@ -1388,10 +1309,11 @@ void TMoverParameters::compute_movement_( double const Deltatime ) {
     RunInternalCommand();
 
     // automatyczny rozruch
-    if (EngineType == TEngineType::ElectricSeriesMotor)
+    if( EngineType == TEngineType::ElectricSeriesMotor ) {
-
+        if( AutoRelayCheck() ) {
-        if (AutoRelayCheck())
             SetFlag( SoundFlag, sound::relay );
+        }
+    }
 
     if( ( EngineType == TEngineType::DieselEngine )
      || ( EngineType == TEngineType::DieselElectric ) ) {
@@ -1399,6 +1321,12 @@ void TMoverParameters::compute_movement_( double const Deltatime ) {
             SetFlag( SoundFlag, sound::relay );
         }
     }
+
+    // TODO: gather and move current calculations to dedicated method
+    TotalCurrent = 0;
+
+    // main circuit
+    MainsCheck( Deltatime );
     // traction motors
     MotorBlowersCheck( Deltatime );
     // uklady hamulcowe:
@@ -1436,6 +1364,145 @@ void TMoverParameters::compute_movement_( double const Deltatime ) {
     BrakeSlippingTimer += Deltatime;
     // automatic doors
     update_doors( Deltatime );
+
+    PowerCouplersCheck( Deltatime );
+}
+
+void TMoverParameters::MainsCheck( double const Deltatime ) {
+
+    // TODO: move other main circuit checks here
+
+    if( MainsInitTime == 0.0 )          { return; }
+
+    if( MainsInitTimeCountdown > 0.0 ) {
+        MainsInitTimeCountdown -= Deltatime;
+    }
+    // TBD, TODO: move voltage calculation to separate method and use also in power coupler state calculation?
+    auto localvoltage { 0.0 };
+    switch( EnginePowerSource.SourceType ) {
+        case TPowerSource::CurrentCollector: {
+            localvoltage =
+                std::max(
+                    localvoltage,
+                    std::max(
+                        PantFrontVolt,
+                        PantRearVolt ) );
+            break;
+        }
+        default: {
+            break;
+        }
+    }
+    if( ( localvoltage == 0.0 )
+     && ( GetTrainsetVoltage() == 0 ) ) {
+        MainsInitTimeCountdown = MainsInitTime;
+    }
+}
+
+void TMoverParameters::PowerCouplersCheck( double const Deltatime ) {
+    // TODO: add support for other power sources
+    auto localvoltage { 0.0 };
+    // heating power sources
+    if( Heating ) {
+        switch( HeatingPowerSource.SourceType ) {
+            case TPowerSource::Generator: {
+                localvoltage = HeatingPowerSource.EngineGenerator.voltage - TotalCurrent * 0.02;
+                break;
+            }
+            case TPowerSource::Main: {
+                localvoltage = ( true == Mains ? Voltage : 0.0 );
+                break;
+            }
+            default: {
+                break;
+            }
+        }
+    }
+    // high voltage power sources
+    switch( EnginePowerSource.SourceType ) {
+        case TPowerSource::CurrentCollector: {
+            localvoltage =
+                std::max(
+                    localvoltage,
+                    std::max(
+                        PantFrontVolt,
+                        PantRearVolt ) );
+            break;
+        }
+        default: {
+            break;
+        }
+    }
+
+    auto const abslocalvoltage { std::abs( localvoltage ) };
+    auto const localpowersource { ( abslocalvoltage > 1.0 ) };
+/*
+    auto const localpowersource { ( std::abs( PantFrontVolt ) + std::abs( PantRearVolt ) > 1.0 ) };
+    auto hvc = std::max( PantFrontVolt, PantRearVolt );
+*/
+    // przekazywanie napiec
+    for( auto side = 0; side < 2; ++side ) {
+      
+        auto &coupler { Couplers[ side ] };
+        // NOTE: in the loop we actually update the state of the coupler on the opposite end of the vehicle
+        auto &oppositecoupler { Couplers[ ( side == end::front ? end::rear : end::front ) ] };
+        auto const oppositehighvoltagecoupling { ( oppositecoupler.CouplingFlag & coupling::highvoltage ) != 0 };
+        auto const oppositeheatingcoupling { ( oppositecoupler.CouplingFlag & coupling::heating ) != 0 };
+        
+        // start with base voltage
+        oppositecoupler.power_high.voltage = abslocalvoltage;
+        oppositecoupler.power_high.is_live = false;
+        oppositecoupler.power_high.is_local = localpowersource; // indicate power source
+        // draw from external source
+        if( coupler.Connected != nullptr ) {
+            auto const &connectedcoupler { coupler.Connected->Couplers[ coupler.ConnectedNr ] };
+            auto const connectedvoltage { (
+                connectedcoupler.power_high.is_live ?
+                    connectedcoupler.power_high.voltage :
+                    0.0 ) };
+            oppositecoupler.power_high.voltage = std::max(
+                oppositecoupler.power_high.voltage,
+                connectedvoltage - coupler.power_high.current * 0.02 );
+            oppositecoupler.power_high.is_live =
+                ( connectedvoltage > 0.1 )
+             && ( oppositehighvoltagecoupling || oppositeheatingcoupling );
+        }
+        // draw from local source
+        if( localpowersource ) {
+            oppositecoupler.power_high.voltage = std::max(
+                oppositecoupler.power_high.voltage,
+                abslocalvoltage - coupler.power_high.current * 0.02 );
+            oppositecoupler.power_high.is_live |=
+                ( abslocalvoltage > 0.1 )
+            &&  ( oppositehighvoltagecoupling || ( oppositeheatingcoupling && localpowersource && Heating ) );
+        }
+    }
+
+    // przekazywanie pradow
+    auto couplervoltage { Couplers[ end::front ].power_high.voltage + Couplers[ end::rear ].power_high.voltage };
+
+    for( auto side = 0; side < 2; ++side ) {
+
+        auto &coupler { Couplers[ side ] };
+        auto const &connectedothercoupler { coupler.Connected->Couplers[ ( coupler.ConnectedNr == end::front ? end::rear : end::front ) ] };
+
+        coupler.power_high.current = 0.0;
+        if( false == localpowersource ) {
+            // bez napiecia...
+            if( couplervoltage != 0.0 ) {
+                // ...ale jest cos na sprzegach:
+                coupler.power_high.current = ( Itot + TotalCurrent ) * coupler.power_high.voltage / couplervoltage; // obciążenie rozkladane stosownie do napiec
+                if( true == coupler.power_high.is_live ) {
+                    coupler.power_high.current += connectedothercoupler.power_high.current;
+                }
+            }
+        }
+        else {
+            if( true == coupler.power_high.is_live ) {
+                TotalCurrent += connectedothercoupler.power_high.current;
+            }
+        }
+    }
 }
 
 double TMoverParameters::ShowEngineRotation(int VehN)
@@ -1492,12 +1559,70 @@ void TMoverParameters::ConverterCheck( double const Timestep ) {
 // heating system status check
 void TMoverParameters::HeatingCheck( double const Timestep ) {
 
-    Heating = (
+    // update heating devices
-        ( true == HeatingAllow )
+    // TBD, TODO: move this to a separate method?
-        // powered vehicles are generally required to activate their power source to provide heating
+    switch( HeatingPowerSource.SourceType ) {
-        // passive vehicles get a pass in this regard
+        case TPowerSource::Generator: {
-     && ( ( Power < 0.1 )
+            if( ( HeatingPowerSource.EngineGenerator.engine_revolutions != nullptr )
-       || ( true == Mains ) ) );
+             && ( HeatingPowerSource.EngineGenerator.revolutions_max > 0 ) ) {
+
+                auto &generator { HeatingPowerSource.EngineGenerator };
+                // TBD, TODO: engine-generator transmission
+                generator.revolutions = *(generator.engine_revolutions);
+
+                auto const absrevolutions { std::abs( generator.revolutions ) };
+                generator.voltage = (
+                    absrevolutions < generator.revolutions_min ? generator.voltage_min * absrevolutions / generator.revolutions_min :
+//                    absrevolutions > generator.revolutions_max ? generator.voltage_max * absrevolutions / generator.revolutions_max :
+                    interpolate(
+                        generator.voltage_min, generator.voltage_max,
+                        clamp(
+                            ( absrevolutions - generator.revolutions_min ) / ( generator.revolutions_max - generator.revolutions_min ),
+                            0.0, 1.0 ) ) )
+                    * sign( generator.revolutions );
+            }
+            break;
+        }
+        default: {
+            break;
+        }
+    }
+
+    // quick check first to avoid unnecessary calls...
+    if( false == HeatingAllow ) {
+        Heating = false;
+        return;
+    }
+    // ...detailed check if we're still here
+    auto const heatingpowerthreshold { 0.1 };
+    // start with external power sources
+    auto voltage { 0.0 };
+    // then try internal ones
+    switch( HeatingPowerSource.SourceType ) {
+        case TPowerSource::Generator: {
+            voltage = HeatingPowerSource.EngineGenerator.voltage;
+            break;
+        }
+        case TPowerSource::PowerCable: {
+            if( HeatingPowerSource.PowerType == TPowerType::ElectricPower ) {
+                voltage = GetTrainsetVoltage();
+            }
+            break;
+        }
+        case TPowerSource::Main: {
+            voltage = ( true == Mains ? Voltage : 0.0 );
+            break;
+        }
+        default: {
+            break;
+        }
+    }
+
+    Heating = ( std::abs( voltage ) > heatingpowerthreshold );
+
+    if( Heating ) {
+        TotalCurrent += 1000 * HeatingPower / voltage; // heater power cost presumably specified in kilowatts
+    }
 }
 
 // water pump status check
@@ -2765,6 +2890,7 @@ void TMoverParameters::MainSwitch_( bool const State ) {
     if( ( false == State )
      || ( ( ( ScndCtrlPos == 0 ) || ( EngineType == TEngineType::ElectricInductionMotor ) )
        && ( ( ConvOvldFlag == false ) || ( TrainType == dt_EZT ) )
+       && ( MainsInitTimeCountdown <= 0.0 )
        && ( true == NoVoltRelay )
        && ( true == OvervoltageRelay )
        && ( LastSwitchingTime > CtrlDelay )
@@ -3892,7 +4018,6 @@ void TMoverParameters::ComputeConstans(void)
     double BearingF, RollF, HideModifier;
     double Curvature; // Ra 2014-07: odwrotność promienia
 
-    TotalCurrent = 0; // Ra 2014-04: tu zerowanie, aby EZT mogło pobierać prąd innemu członowi
     TotalMass = ComputeMass();
     TotalMassxg = TotalMass * g; // TotalMass*g
     BearingF = 2.0 * (DamageFlag && dtrain_bearing);
@@ -4031,6 +4156,7 @@ void TMoverParameters::ComputeTotalForce(double dt) {
         else
             Voltage = RunningTraction.TractionVoltage * DirAbsolute; // ActiveDir*CabNo;
     } // bo nie dzialalo
+    // TODO: clean up this elseif to match changes in power coupling code
     else if( ( EngineType == TEngineType::ElectricInductionMotor )
           || ( ( ( Couplers[ end::front ].CouplingFlag & ctrain_power ) == ctrain_power )
             || ( ( Couplers[ end::rear  ].CouplingFlag & ctrain_power ) == ctrain_power ) ) ) {
@@ -4423,7 +4549,7 @@ double TMoverParameters::TractionForce( double dt ) {
 
                 tmp = DElist[ MainCtrlPos ].RPM / 60.0;
 
-                if( ( true == Heating )
+                if( ( true == HeatingAllow )
                  && ( HeatingPower > 0 )
                  && ( EngineHeatingRPM > 0 ) ) {
                     // bump engine revolutions up if needed, when heating is on
@@ -4577,7 +4703,7 @@ double TMoverParameters::TractionForce( double dt ) {
             EnginePower = ( 2 * dizel_Mstand + dmoment ) * enrot * ( 2.0 * M_PI / 1000.0 );
             if( MainCtrlPowerPos() > 1 ) {
                 // dodatkowe opory z powodu sprezarki}
-                dmoment -= dizel_Mstand * ( 0.2 * enrot / dizel_nmax );
+//                dmoment -= dizel_Mstand * ( 0.2 * enrot / dizel_nmax ); //yB: skąd to w ogóle się bierze?!
             }
             break;
         }
@@ -4760,6 +4886,8 @@ double TMoverParameters::TractionForce( double dt ) {
         {
             Mm = dmoment; //bylo * dizel_engage
             Mw = Mm * dtrans; // dmoment i dtrans policzone przy okazji enginerotation
+			if ((hydro_R) && (hydro_R_Placement == 0))
+				Mw -= dizel_MomentumRetarder(nrot * Transmision.Ratio, dt) * Transmision.Ratio;
             Fw = Mw * 2.0 / WheelDiameter / NPoweredAxles;
             Ft = Fw * NPoweredAxles; // sila trakcyjna
             Ft = Ft * DirAbsolute; // ActiveDir*CabNo;
@@ -5300,12 +5428,12 @@ double TMoverParameters::TractionForce( double dt ) {
                 Im = eimv[eimv_If];
                 if ((eimv[eimv_Ipoj] >= 0))
                     Vadd *= (1.0 - 2.0 * dt);
-                else if ((Voltage < EnginePowerSource.CollectorParameters.MaxV))
+                else if ((std::abs(Voltage) < EnginePowerSource.CollectorParameters.MaxV))
                     Vadd *= (1.0 - dt);
                 else
                     Vadd = Max0R(
                         Vadd * (1.0 - 0.2 * dt),
-                        0.007 * (Voltage - (EnginePowerSource.CollectorParameters.MaxV - 100)));
+                        0.007 * (std::abs(Voltage) - (EnginePowerSource.CollectorParameters.MaxV - 100)));
                 Itot = eimv[eimv_Ipoj] * (0.01 + Min0R(0.99, 0.99 - Vadd));
 
                 EnginePower = abs(eimv[eimv_Ic] * eimv[eimv_U] * NPoweredAxles) / 1000;
@@ -6124,10 +6252,35 @@ void TMoverParameters::CheckEIMIC(double dt)
 		}
 		break;
 	case 3:
-		eimic -= clamp(-UniCtrlList[MainCtrlPos].SetCtrlVal + eimic, 0.0, dt * UniCtrlList[MainCtrlPos].SpeedDown); //odejmuj do X
+		if ((UniCtrlList[MainCtrlPos].mode != BrakeCtrlPos) && (MainCtrlActualPos == MainCtrlPos)) //there was no move of controller, but brake only
-		eimic += clamp(UniCtrlList[MainCtrlPos].SetCtrlVal - eimic, 0.0, dt * UniCtrlList[MainCtrlPos].SpeedUp); //dodawaj do X
+		{
+			if (BrakeCtrlPos < UniCtrlList[MainCtrlPosNo].mode) 
+				BrakeLevelSet(UniCtrlList[MainCtrlPosNo].mode); //bottom clamping
+			if (BrakeCtrlPos > UniCtrlList[0].mode)
+				BrakeLevelSet(UniCtrlList[0].mode); //top clamping
+			while (BrakeCtrlPos > UniCtrlList[MainCtrlPos].mode) DecMainCtrl(1); //find nearest position
+			while (BrakeCtrlPos < UniCtrlList[MainCtrlPos].mode) IncMainCtrl(1); //find nearest position
+		}
+		else //controller was moved
+			BrakeLevelSet(UniCtrlList[MainCtrlPos].mode);
+
+		if ((MainCtrlActualPos != MainCtrlPos) || (LastRelayTime>InitialCtrlDelay))
+		{
+			eimic -= clamp(-UniCtrlList[MainCtrlPos].SetCtrlVal + eimic, 0.0, (MainCtrlActualPos == MainCtrlPos ? dt * UniCtrlList[MainCtrlPos].SpeedDown : sign(UniCtrlList[MainCtrlPos].SpeedDown) * 0.01)); //odejmuj do X
+			eimic += clamp(UniCtrlList[MainCtrlPos].SetCtrlVal - eimic, 0.0, (MainCtrlActualPos == MainCtrlPos ? dt * UniCtrlList[MainCtrlPos].SpeedUp : sign(UniCtrlList[MainCtrlPos].SpeedUp) * 0.01)); //dodawaj do X
 			eimic = clamp(eimic, UniCtrlList[MainCtrlPos].MinCtrlVal, UniCtrlList[MainCtrlPos].MaxCtrlVal);
 		}
+		if (MainCtrlActualPos == MainCtrlPos)
+			LastRelayTime += dt;
+		else
+		{
+			LastRelayTime = 0;
+			MainCtrlActualPos = MainCtrlPos;
+		}
+		if (Hamulec->GetEDBCP() > 0.3 && eimic < 0) //when braking with pneumatic brake
+			eimic = 0; //shut off retarder
+
+	}
     auto const eimicpowerenabled {
         ( ( true == Mains ) || ( Power == 0.0 ) )
      && ( ( Doors.instances[ side::left  ].open_permit == false )
@@ -6249,6 +6402,22 @@ bool TMoverParameters::dizel_AutoGearCheck(void)
 
     if (Mains)
     {
+		if (EIMCtrlType > 0) //sterowanie komputerowe
+		{
+			if (dizel_automaticgearstatus == 0)
+			{
+				if ((hydro_TC && hydro_TC_Fill > 0.01) || (eimic_real > 0.0))
+					dizel_EngageSwitch(1.0);
+				else
+					if (Vel > hydro_R_EngageVel && hydro_R && hydro_R_Fill > 0.01)
+						dizel_EngageSwitch(0.5);
+					else
+						dizel_EngageSwitch(0.0);
+			}
+			else
+				dizel_EngageSwitch(0.0);
+		}
+		else
         if (dizel_automaticgearstatus == 0) // ustaw cisnienie w silowniku sprzegla}
             switch (RList[MainCtrlPos].Mn)
             {
@@ -6380,7 +6549,7 @@ bool TMoverParameters::dizel_Update(double dt) {
         dizel_EngageChange( dt );
         DU = dizel_AutoGearCheck();
         double const fillspeed { 2 };
-        dizel_fill = dizel_fill + fillspeed * dt * ( dizel_fillcheck( MainCtrlPos ) - dizel_fill );
+        dizel_fill = dizel_fill + fillspeed * dt * ( dizel_fillcheck( MainCtrlPos , dt ) - dizel_fill );
     }
 
     dizel_Heat( dt );
@@ -6392,7 +6561,7 @@ bool TMoverParameters::dizel_Update(double dt) {
 // Q: 20160715
 // oblicza napelnienie, uzwglednia regulator obrotow
 // *************************************************************************************************
-double TMoverParameters::dizel_fillcheck(int mcp)
+double TMoverParameters::dizel_fillcheck(int mcp, double dt)
 { 
     auto realfill { 0.0 };
 
@@ -6409,11 +6578,30 @@ double TMoverParameters::dizel_fillcheck(int mcp)
         }
         else {
             // napelnienie zalezne od MainCtrlPos
+			if (EIMCtrlType > 0)
+			{
+				realfill = std::max(0.0, eimic_real);
+				if (eimic_real>0 && !hydro_TC_Lockup)
+				{
+					dizel_nreg_min = std::min(dizel_nreg_min + 2.5 * dt, dizel_nmin_hdrive + eimic_real * dizel_nmin_hdrive_factor);
+				}
+				else
+				{
+					if (Vel < hydro_R_EngageVel && hydro_R && hydro_R_Fill > 0.01)
+						dizel_nreg_min = std::min(dizel_nreg_min + 5.0 * dt, dizel_nmin_retarder);
+					else
+						dizel_nreg_min = dizel_nmin;
+				}
+			}
+			else
 				realfill = RList[mcp].R;
         }
         if (dizel_nmax_cutoff > 0)
         {
             auto nreg { 0.0 };
+			if (EIMCtrlType > 0)
+				nreg = (eimic_real > 0 ? dizel_nmax : dizel_nmin);
+			else
             switch (RList[MainCtrlPos].Mn)
             {
             case 0:
@@ -6452,7 +6640,7 @@ double TMoverParameters::dizel_fillcheck(int mcp)
 				realfill = 0; 
 			if (enrot < nreg) //pod predkoscia regulatora dawka zadana
 				realfill = realfill;
-			if ((enrot < dizel_nmin * 0.98)&&(RList[mcp].R>0.001)) //jesli ponizej biegu jalowego i niezerowa dawka, to dawaj pelna
+			if ((enrot < dizel_nreg_min)&&(RList[mcp].R>0.001)) //jesli ponizej biegu jalowego i niezerowa dawka, to dawaj pelna
 				realfill = 1;
         }
     }
@@ -6478,6 +6666,8 @@ double TMoverParameters::dizel_Momentum(double dizel_fill, double n, double dt)
 
     if( enrot > 0 ) {
         Moment = ( dizel_Mmax - ( dizel_Mmax - dizel_Mnmax ) * square( ( enrot - dizel_nMmax ) / ( dizel_nMmax - dizel_nmax ) ) ) * dizel_fill - dizel_Mstand;
+		if ((hydro_R) && (hydro_R_Placement == 2))
+			Moment -= dizel_MomentumRetarder(enrot, dt);
     }
     else {
         Moment = -dizel_Mstand;
@@ -6495,10 +6685,11 @@ double TMoverParameters::dizel_Momentum(double dizel_fill, double n, double dt)
 	if (hydro_TC) //jesli przetwornik momentu
 	{
 		//napelnianie przetwornika
-		if ((MainCtrlPowerPos() > 0) && (Mains) && (enrot>dizel_nmin*0.9))
+		bool IsPower = (EIMCtrlType > 0 ? eimic_real > 0 : MainCtrlPowerPos() > 0);
+		if ((IsPower) && (Mains) && (enrot>dizel_nmin*0.9))
 			hydro_TC_Fill += hydro_TC_FillRateInc * dt;
 		//oproznianie przetwornika
-		if (((IsMainCtrlNoPowerPos()) && (Vel<3))
+		if (((!IsPower) && (Vel<dizel_maxVelANS))
 			|| (!Mains)
 			|| (enrot<dizel_nmin*0.8))
 			hydro_TC_Fill -= hydro_TC_FillRateDec * dt;
@@ -6506,10 +6697,10 @@ double TMoverParameters::dizel_Momentum(double dizel_fill, double n, double dt)
 		hydro_TC_Fill = clamp(hydro_TC_Fill, 0.0, 1.0);
 
 		//blokowanie sprzegla blokującego
-		if ((Vel > hydro_TC_LockupSpeed) && (Mains) && (enrot > 0.9 * dizel_nmin) && (MainCtrlPowerPos() > 0))
+		if ((Vel > hydro_TC_LockupSpeed) && (Mains) && (enrot > 0.9 * dizel_nmin) && (IsPower))
 			hydro_TC_LockupRate += hydro_TC_FillRateInc*dt;
 		//luzowanie sprzegla blokujacego
-		if ((Vel < (MainCtrlPowerPos() > 0 ? hydro_TC_LockupSpeed : hydro_TC_UnlockSpeed)) || (!Mains) || (enrot < 0.8 * dizel_nmin))
+		if ((Vel < (IsPower ? hydro_TC_LockupSpeed : hydro_TC_UnlockSpeed)) || (!Mains) || (enrot < 0.8 * dizel_nmin))
 			hydro_TC_LockupRate -= hydro_TC_FillRateDec*dt;
 		//obcinanie zakresu
 		hydro_TC_LockupRate = clamp(hydro_TC_LockupRate, 0.0, 1.0);
@@ -6596,6 +6787,8 @@ double TMoverParameters::dizel_Momentum(double dizel_fill, double n, double dt)
 		double enrot_max = enrot + (Min0R(TorqueC, TorqueL + abs(hydro_TC_TorqueIn)) + Moment) / dizel_AIM * dt;
 		enrot = clamp(n,enrot_min,enrot_max);
 	}
+	if ((hydro_R) && (hydro_R_Placement == 1))
+		gearMoment -= dizel_MomentumRetarder(hydro_TC_nOut, dt);
 
 
     if( ( enrot <= 0 ) && ( false == dizel_spinup ) ) {
@@ -6608,6 +6801,40 @@ double TMoverParameters::dizel_Momentum(double dizel_fill, double n, double dt)
     return gearMoment;
 }
 
+double TMoverParameters::dizel_MomentumRetarder(double n, double dt)
+{
+	double RetarderRequest = (Mains ? std::max(0.0, -eimic_real) : 0);
+	if (Vel < hydro_R_MinVel)
+		RetarderRequest = 0;
+	if ((hydro_R_Placement == 2) && (enrot < dizel_nmin))
+	{
+		RetarderRequest = 0;
+	}
+
+	hydro_R_n = n * 60;
+
+	if (hydro_R_Fill < RetarderRequest) //gdy zadane hamowanie
+	{
+		hydro_R_Fill = std::min(hydro_R_Fill + hydro_R_FillRateInc*dt, RetarderRequest);
+	}
+	else
+	{
+		hydro_R_Fill = std::max(hydro_R_Fill - hydro_R_FillRateDec*dt, RetarderRequest);
+	}
+	
+	double Moment = hydro_R_MaxTorque;
+	double pwr = Moment * n * M_PI * 2 * 0.001;
+	if (pwr > hydro_R_MaxPower)
+		Moment = Moment * hydro_R_MaxPower / pwr;
+	double moment_in = n*n*hydro_R_TorqueInIn;
+	Moment = std::min(moment_in, Moment * hydro_R_Fill);
+	
+	hydro_R_Torque = Moment;
+
+	return Moment;
+
+}
+
 // sets component temperatures to specified value
 void TMoverParameters::dizel_HeatSet( float const Value ) {
 
@@ -6917,8 +7144,8 @@ bool TMoverParameters::ChangeDoorPermitPreset( int const Change, range_t const N
 
         Doors.permit_preset = clamp<int>( Doors.permit_preset + Change, 0, Doors.permit_presets.size() - 1 );
         auto const doors { Doors.permit_presets[ Doors.permit_preset ] };
-        auto const permitleft  = doors & 1;
+        auto const permitleft { ( ( doors & 1 ) != 0 ) };
-        auto const permitright = doors & 2;
+        auto const permitright { ( ( doors & 2 ) != 0 ) };
 
         PermitDoors( ( CabNo > 0 ? side::left : side::right ), permitleft, Notify );
         PermitDoors( ( CabNo > 0 ? side::right : side::left ), permitright, Notify );
@@ -7376,15 +7603,11 @@ double TMoverParameters::GetTrainsetVoltage(void)
 {//ABu: funkcja zwracajaca napiecie dla calego skladu, przydatna dla EZT
     return std::max(
         ( ( ( Couplers[end::front].Connected )
-         && ( ( Couplers[ end::front ].CouplingFlag & ctrain_power )
+         && ( Couplers[ end::front ].Connected->Couplers[ Couplers[ end::front ].ConnectedNr ].power_high.is_live ) ) ?
-           || ( ( Couplers[ end::front ].CouplingFlag & ctrain_heating )
-             && ( Couplers[ end::front ].Connected->Heating ) ) ) ) ?
             Couplers[end::front].Connected->Couplers[ Couplers[end::front].ConnectedNr ].power_high.voltage :
             0.0 ),
         ( ( ( Couplers[end::rear].Connected )
-         && ( ( Couplers[ end::rear ].CouplingFlag & ctrain_power )
+         && ( Couplers[ end::rear ].Connected->Couplers[ Couplers[ end::rear ].ConnectedNr ].power_high.is_live ) ) ?
-           || ( ( Couplers[ end::rear ].CouplingFlag & ctrain_heating )
-             && ( Couplers[ end::rear ].Connected->Heating ) ) ) ) ?
             Couplers[ end::rear ].Connected->Couplers[ Couplers[ end::rear ].ConnectedNr ].power_high.voltage :
             0.0 ) );
 }
@@ -7826,13 +8049,19 @@ bool TMoverParameters::LoadFIZ(std::string chkpath)
     std::string file = chkpath + TypeName + ".fiz";
 
     WriteLog("LOAD FIZ FROM " + file);
-
+/*
     std::ifstream in(file);
 	if (!in.is_open())
 	{
 		WriteLog("E8 - FIZ FILE NOT EXIST.");
 		return false;
 	}
+*/
+    cParser fizparser( file, cParser::buffer_FILE );
+    if( false == fizparser.ok() ) {
+        WriteLog( "E8 - FIZ FILE NOT EXIST." );
+        return false;
+    }
 
     ConversionError = 0;
 
@@ -7840,8 +8069,13 @@ bool TMoverParameters::LoadFIZ(std::string chkpath)
     // ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
     std::unordered_map<std::string, std::string> fizlines;
     std::string inputline;
+/*
     while (std::getline(in, inputline))
-    {
+*/
+    while( fizparser.ok() ) {
+
+        inputline = fizparser.getToken<std::string>( false, "\n" );
+
         bool comment = ( ( inputline.find('#') != std::string::npos )
 			          || ( inputline.compare( 0, 2, "//" ) == 0 ) );
         if( true == comment ) {
@@ -7875,7 +8109,7 @@ bool TMoverParameters::LoadFIZ(std::string chkpath)
 			startRLIST = false;
 			continue;
 		}
-		if (issection("END-RL", inputline)) {
+		if (issection("END-UCL", inputline)) {
 			startBPT = false;
 			startUCLIST = false;
 			continue;
@@ -8088,7 +8322,7 @@ bool TMoverParameters::LoadFIZ(std::string chkpath)
 			startBPT = false;
 			fizlines.emplace("UCList", inputline);
 			startUCLIST = true; LISTLINE = 0;
-			LoadFIZ_RList(inputline);
+			LoadFIZ_UCList(inputline);
 			continue;
 		}
 
@@ -8142,7 +8376,7 @@ bool TMoverParameters::LoadFIZ(std::string chkpath)
             continue;
         }
 		if (true == startUCLIST) {
-			readRList(inputline);
+			readUCList(inputline);
 			continue;
 		}
         if( true == startDLIST ) {
@@ -8162,8 +8396,9 @@ bool TMoverParameters::LoadFIZ(std::string chkpath)
             continue;
         }
     } // while line
+/*
     in.close();
-
+*/
     // Operacje na zebranych parametrach - przypisywanie do wlasciwych zmiennych i ustawianie
     // zaleznosci
 
@@ -8774,6 +9009,8 @@ void TMoverParameters::LoadFIZ_Cntrl( std::string const &line ) {
 		false;
 	extract_value(SpeedCtrlAutoTurnOffFlag, "SpeedCtrlATOF", line, "");
 
+    // main circuit
+    extract_value( MainsInitTime, "MainInitTime", line, "" );
     // converter
     {
         std::map<std::string, start_t> starts {
@@ -8811,6 +9048,9 @@ void TMoverParameters::LoadFIZ_Cntrl( std::string const &line ) {
                 lookup->second :
                 start_t::manual;
     }
+    // pantograph compressor valve
+    PantAutoValve = ( TrainType == dt_EZT ); // legacy code behaviour, automatic valve was initially installed in all EMUs
+    extract_value( PantAutoValve, "PantAutoValve", line, "" );
     // fuel pump
     {
         auto lookup = starts.find( extract_value( "FuelStart", line ) );
@@ -8849,9 +9089,9 @@ void TMoverParameters::LoadFIZ_Cntrl( std::string const &line ) {
 void TMoverParameters::LoadFIZ_Blending(std::string const &line) {
 
 	extract_value(MED_Vmax, "MED_Vmax", line, to_string(Vmax));
-	extract_value(MED_Vmin, "MED_Vmin", line, "0");
+	extract_value(MED_Vmin, "MED_Vmin", line, "");
 	extract_value(MED_Vref, "MED_Vref", line, to_string(Vmax));
-	extract_value(MED_amax, "MED_amax", line, "9.81");
+	extract_value(MED_amax, "MED_amax", line, "");
 	extract_value(MED_EPVC, "MED_EPVC", line, "");
 	extract_value(MED_Ncor, "MED_Ncor", line, "");
 
@@ -8859,10 +9099,10 @@ void TMoverParameters::LoadFIZ_Blending(std::string const &line) {
 
 void TMoverParameters::LoadFIZ_DCEMUED(std::string const &line) {
 
-	extract_value(DCEMUED_CC, "CouplerCheck", line, "0");
+	extract_value(DCEMUED_CC, "CouplerCheck", line, "");
-	extract_value(DCEMUED_EP_max_Vel, "EP_max_Vel", line, "0");
+	extract_value(DCEMUED_EP_max_Vel, "EP_max_Vel", line, "");
-	extract_value(DCEMUED_EP_min_Im, "EP_min_Im", line, "0");
+	extract_value(DCEMUED_EP_min_Im, "EP_min_Im", line, "");
-	extract_value(DCEMUED_EP_delay, "EP_delay", line, "0");
+	extract_value(DCEMUED_EP_delay, "EP_delay", line, "");
 
 }
 
@@ -8909,12 +9149,13 @@ void TMoverParameters::LoadFIZ_Power( std::string const &Line ) {
 
     EnginePowerSource.SourceType = LoadFIZ_SourceDecode( extract_value( "EnginePower", Line ) );
     LoadFIZ_PowerParamsDecode( EnginePowerSource, "", Line );
-
+/*
     if( ( EnginePowerSource.SourceType == TPowerSource::Generator )
      && ( EnginePowerSource.GeneratorEngine == TEngineType::WheelsDriven ) ) {
         // perpetuum mobile?
         ConversionError = 666;
     }
+*/
     if( Power == 0.0 ) {
         //jeśli nie ma mocy, np. rozrządcze EZT
         EnginePowerSource.SourceType = TPowerSource::NotDefined;
@@ -8970,6 +9211,19 @@ void TMoverParameters::LoadFIZ_Engine( std::string const &Input ) {
 
             extract_value( dizel_nmin, "nmin", Input, "" );
             dizel_nmin /= 60.0;
+			dizel_nreg_min = dizel_nmin * 0.98;
+			extract_value(dizel_nmin_hdrive, "nmin_hdrive", Input, "");
+			dizel_nmin_hdrive /= 60.0;
+			if (dizel_nmin_hdrive == 0.0) {
+				dizel_nmin_hdrive = dizel_nmin;
+			}
+			extract_value(dizel_nmin_hdrive_factor, "nmin_hdrive_factor", Input, "");
+			dizel_nmin_hdrive_factor /= 60.0;
+			extract_value(dizel_nmin_retarder, "nmin_retarder", Input, "");
+			dizel_nmin_retarder /= 60.0;
+			if (dizel_nmin_retarder == 0.0) {
+				dizel_nmin_retarder = dizel_nmin;
+			}
             // TODO: unify naming scheme and sort out which diesel engine params are used where and how
             extract_value( nmax, "nmax", Input, "" );
             nmax /= 60.0; 
@@ -9004,6 +9258,7 @@ void TMoverParameters::LoadFIZ_Engine( std::string const &Input ) {
 				extract_value(hydro_TC_TorqueOutOut, "TC_TOO", Input, "");
 				extract_value(hydro_TC_LockupSpeed, "TC_LS", Input, "");
 				extract_value(hydro_TC_UnlockSpeed, "TC_ULS", Input, "");
+				extract_value(dizel_maxVelANS, "MaxVelANS", Input, "");
 
 				extract_value(hydro_R, "IsRetarder", Input, "");
 				if (true == hydro_R) {
@@ -9014,6 +9269,7 @@ void TMoverParameters::LoadFIZ_Engine( std::string const &Input ) {
 					extract_value(hydro_R_FillRateInc, "R_FRI", Input, "");
 					extract_value(hydro_R_FillRateDec, "R_FRD", Input, "");
 					extract_value(hydro_R_MinVel, "R_MinVel", Input, "");
+					extract_value(hydro_R_EngageVel, "R_EngageVel", Input, "");
 				}
 			}
             break;
@@ -9237,12 +9493,31 @@ void TMoverParameters::LoadFIZ_PowerParamsDecode( TPowerParameters &Powerparamet
         }
         case TPowerSource::Transducer: {
             
-            extract_value( Powerparameters.InputVoltage, Prefix + "TransducerInputV", Line, "" );
+            extract_value( Powerparameters.Transducer.InputVoltage, Prefix + "TransducerInputV", Line, "" );
             break;
         }
         case TPowerSource::Generator: {
+            // prime mover for the generator
+            auto &generatorparameters { Powerparameters.EngineGenerator };
 
-            Powerparameters.GeneratorEngine = LoadFIZ_EngineDecode( extract_value( Prefix + "GeneratorEngine", Line ) );
+            auto const enginetype { LoadFIZ_EngineDecode( extract_value( Prefix + "GeneratorEngine", Line ) ) };
+            if( enginetype == TEngineType::Main ) {
+                generatorparameters.engine_revolutions = &enrot;
+            }
+            else {
+                // TODO: for engine types other than Main create requested engine object and link to its revolutions
+                generatorparameters.engine_revolutions = nullptr;
+                generatorparameters.revolutions = 0;
+                generatorparameters.voltage = 0;
+            }
+            // config
+            extract_value( generatorparameters.voltage_min, Prefix + "GeneratorMinVoltage", Line, "0" );
+            extract_value( generatorparameters.voltage_max, Prefix + "GeneratorMaxVoltage", Line, "0" );
+            // NOTE: for consistency the fiz file specifies  revolutions per minute
+            extract_value( generatorparameters.revolutions_min, Prefix + "GeneratorMinRPM", Line, "0" );
+            extract_value( generatorparameters.revolutions_max, Prefix + "GeneratorMaxRPM", Line, "0" );
+            generatorparameters.revolutions_min /= 60;
+            generatorparameters.revolutions_max /= 60;
             break;
         }
         case TPowerSource::Accumulator: {
@@ -9328,7 +9603,8 @@ TPowerSource TMoverParameters::LoadFIZ_SourceDecode( std::string const &Source )
         { "CurrentCollector", TPowerSource::CurrentCollector },
         { "PowerCable", TPowerSource::PowerCable },
         { "Heater", TPowerSource::Heater },
-        { "Internal", TPowerSource::InternalSource }
+        { "Internal", TPowerSource::InternalSource },
+        { "Main", TPowerSource::Main }
     };
     auto lookup = powersources.find( Source );
     return
@@ -9347,7 +9623,8 @@ TEngineType TMoverParameters::LoadFIZ_EngineDecode( std::string const &Engine )
         { "Dumb", TEngineType::Dumb },
         { "DieselElectric", TEngineType::DieselElectric },
         { "DumbDE", TEngineType::DieselElectric },
-        { "ElectricInductionMotor", TEngineType::ElectricInductionMotor }
+        { "ElectricInductionMotor", TEngineType::ElectricInductionMotor },
+        { "Main", TEngineType::Main }
     };
     auto lookup = enginetypes.find( Engine );
     return
@@ -9565,6 +9842,17 @@ bool TMoverParameters::CheckLocomotiveParameters(bool ReadyFlag, int Dir)
     if( LightsPosNo > 0 )
         LightsPos = LightsDefPos;
 
+    // NOTE: legacy compatibility behaviour for vehicles without defined heating power source
+    if( ( EnginePowerSource.SourceType == TPowerSource::CurrentCollector )
+     && ( HeatingPowerSource.SourceType == TPowerSource::NotDefined ) ) {
+        HeatingPowerSource.SourceType = TPowerSource::Main;
+    }
+    if( ( HeatingPowerSource.SourceType == TPowerSource::NotDefined )
+     && ( HeatingPower > 0 ) ) {
+        HeatingPowerSource.SourceType = TPowerSource::PowerCable;
+        HeatingPowerSource.PowerType = TPowerType::ElectricPower;
+    }
+
     // checking ready flag
     // to dac potem do init
     if( ReadyFlag ) // gotowy do drogi

MdlMngr.cpp

@@ -57,7 +57,7 @@ TModelsManager::LoadModel(std::string const &Name, bool dynamic) {
 }
 
 TModel3d *
-TModelsManager::GetModel(std::string const &Name, bool const Dynamic)
+TModelsManager::GetModel(std::string const &Name, bool const Dynamic, bool const Logerrors )
 { // model może być we wpisie "node...model" albo "node...dynamic", a także być dodatkowym w dynamic
     // (kabina, wnętrze, ładunek)
     // dla "node...dynamic" mamy podaną ścieżkę w "\dynamic\" i musi być co najmniej 1 poziom, zwkle
@@ -106,7 +106,9 @@ TModelsManager::GetModel(std::string const &Name, bool const Dynamic)
     }
     else {
         // there's nothing matching in the databank nor on the disk, report failure...
+        if( Logerrors ) {
             ErrorLog( "Bad file: failed do locate 3d model file \"" + filename + "\"", logtype::file );
+        }
         // ...and link it with the error model slot
         m_modelsmap.emplace( filename, null_handle );
     }

MdlMngr.h

@@ -22,7 +22,7 @@ private:
 class TModelsManager {
 public:
     // McZapkie: dodalem sciezke, notabene Path!=Patch :)
-    static TModel3d *GetModel( std::string const &Name, bool dynamic = false );
+    static TModel3d *GetModel( std::string const &Name, bool const dynamic = false, bool const Logerrors = true );
 
 private:
 // types:

Traction.cpp

@@ -529,7 +529,7 @@ glm::vec3
 TTraction::wire_color() const {
 
     glm::vec3 color;
-    if( !DebugModeFlag || GfxRenderer.settings.force_normal_traction_render )
+	if( !GfxRenderer.settings.traction_debug )
     {
         switch( Material ) { // Ra: kolory podzieliłem przez 2, bo po zmianie ambient za jasne były
                              // trzeba uwzględnić kierunek świecenia Słońca - tylko ze Słońcem widać kolor

TractionPower.h

@@ -15,6 +15,8 @@ http://mozilla.org/MPL/2.0/.
 
 class TTractionPowerSource : public scene::basic_node {
 
+    friend class debug_panel;
+
 public:
 // constructor
     TTractionPowerSource( scene::node_data const &Nodedata );

Train.cpp

@@ -17,8 +17,9 @@ http://mozilla.org/MPL/2.0/.
 
 #include "Globals.h"
 #include "simulation.h"
-#include "Camera.h"
+#include "Event.h"
 #include "simulationtime.h"
+#include "Camera.h"
 #include "Logs.h"
 #include "MdlMngr.h"
 #include "Model3d.h"
@@ -339,6 +340,7 @@ TTrain::commandhandler_map const TTrain::m_commandhandlers = {
     { user_command::radiochanneldecrease, &TTrain::OnCommand_radiochanneldecrease },
     { user_command::radiostopsend, &TTrain::OnCommand_radiostopsend },
     { user_command::radiostoptest, &TTrain::OnCommand_radiostoptest },
+    { user_command::radiocall3send, &TTrain::OnCommand_radiocall3send },
     { user_command::cabchangeforward, &TTrain::OnCommand_cabchangeforward },
     { user_command::cabchangebackward, &TTrain::OnCommand_cabchangebackward },
     { user_command::generictoggle0, &TTrain::OnCommand_generictoggle },
@@ -452,6 +454,8 @@ dictionary_source *TTrain::GetTrainState() {
     // basic systems state data
     dict->insert( "battery", mvControlled->Battery );
     dict->insert( "linebreaker", mvControlled->Mains );
+    dict->insert( "main_init", ( mvControlled->MainsInitTimeCountdown < mvControlled->MainsInitTime ) && ( mvControlled->MainsInitTimeCountdown > 0.0 ) );
+    dict->insert( "main_ready", ( false == mvControlled->Mains ) && ( fHVoltage > 0.0 ) && ( mvControlled->MainsInitTimeCountdown <= 0.0 ) );
     dict->insert( "converter", mvControlled->ConverterFlag );
     dict->insert( "converter_overload", mvControlled->ConvOvldFlag );
     dict->insert( "compress", mvControlled->CompressorFlag );
@@ -4718,10 +4722,10 @@ void TTrain::OnCommand_doorcloseall( TTrain *Train, command_data const &Command
     if( Command.action == GLFW_PRESS ) {
 
         if( Train->mvOccupied->Doors.has_autowarning ) {
-            // automatic departure signal delays actual door closing until the button is released
             Train->mvOccupied->signal_departure( true );
         }
-        else {
+        if( Train->ggDoorAllOffButton.type() != TGaugeType::push_delayed ) {
+            // delays the action until the button is released
             Train->mvOccupied->OperateDoors( side::right, false );
             Train->mvOccupied->OperateDoors( side::left, false );
         }
@@ -4732,10 +4736,10 @@ void TTrain::OnCommand_doorcloseall( TTrain *Train, command_data const &Command
             Train->ggDoorAllOffButton.UpdateValue( 1.0, Train->dsbSwitch );
     }
     else if( Command.action == GLFW_RELEASE ) {
-        // release the button
         if( Train->mvOccupied->Doors.has_autowarning ) {
-            // automatic departure signal delays actual door closing until the button is released
             Train->mvOccupied->signal_departure( false );
+        }
+        if( Train->ggDoorAllOffButton.type() == TGaugeType::push_delayed ) {
             // now we can actually close the door
             Train->mvOccupied->OperateDoors( side::right, false );
             Train->mvOccupied->OperateDoors( side::left, false );
@@ -5011,6 +5015,7 @@ void TTrain::OnCommand_radiostoptest( TTrain *Train, command_data const &Command
 
     if( Command.action == GLFW_PRESS ) {
         if( ( Train->RadioChannel() == 10 )
+         && ( true == Train->mvOccupied->Radio )
          && ( Train->mvControlled->Battery || Train->mvControlled->ConverterFlag ) ) {
             Train->Dynamic()->RadioStop();
         }
@@ -5023,6 +5028,23 @@ void TTrain::OnCommand_radiostoptest( TTrain *Train, command_data const &Command
     }
 }
 
+void TTrain::OnCommand_radiocall3send( TTrain *Train, command_data const &Command ) {
+
+    if( Command.action == GLFW_PRESS ) {
+        if( ( Train->RadioChannel() != 10 )
+         && ( true == Train->mvOccupied->Radio )
+         && ( Train->mvControlled->Battery || Train->mvControlled->ConverterFlag ) ) {
+            simulation::Events.queue_receivers( radio_message::call3, Train->Dynamic()->GetPosition() );
+        }
+        // visual feedback
+        Train->ggRadioCall3.UpdateValue( 1.0 );
+    }
+    else if( Command.action == GLFW_RELEASE ) {
+        // visual feedback
+        Train->ggRadioCall3.UpdateValue( 0.0 );
+    }
+}
+
 void TTrain::OnCommand_cabchangeforward( TTrain *Train, command_data const &Command ) {
 
     if( Command.action == GLFW_PRESS ) {
@@ -5036,6 +5058,10 @@ void TTrain::OnCommand_cabchangeforward( TTrain *Train, command_data const &Comm
                          1 );
             }
         }
+        // HACK: match consist door permit state with the preset in the active cab
+        if( Train->ggDoorPermitPresetButton.SubModel != nullptr ) {
+            Train->mvOccupied->ChangeDoorPermitPreset( 0 );
+        }
     }
 }
 
@@ -5052,6 +5078,10 @@ void TTrain::OnCommand_cabchangebackward( TTrain *Train, command_data const &Com
                          1 );
             }
         }
+        // HACK: match consist door permit state with the preset in the active cab
+        if( Train->ggDoorPermitPresetButton.SubModel != nullptr ) {
+            Train->mvOccupied->ChangeDoorPermitPreset( 0 );
+        }
     }
 }
 
@@ -5098,10 +5128,11 @@ bool TTrain::Update( double const Deltatime )
     if( ( ggMainButton.GetDesiredValue() > 0.95 )
      || ( ggMainOnButton.GetDesiredValue() > 0.95 ) ) {
         // keep track of period the line breaker button is held down, to determine when/if circuit closes
-        if( ( fHVoltage > 0.5 * mvControlled->EnginePowerSource.MaxVoltage )
+        if( ( mvControlled->MainsInitTimeCountdown <= 0.0 )
+         && ( ( fHVoltage > 0.5 * mvControlled->EnginePowerSource.MaxVoltage )
            || ( ( mvControlled->EngineType != TEngineType::ElectricSeriesMotor )
              && ( mvControlled->EngineType != TEngineType::ElectricInductionMotor )
-           && ( true == mvControlled->Battery ) ) ) {
+             && ( true == mvControlled->Battery ) ) ) ) {
             // prevent the switch from working if there's no power
             // TODO: consider whether it makes sense for diesel engines and such
             fMainRelayTimer += Deltatime;
@@ -5626,9 +5657,10 @@ bool TTrain::Update( double const Deltatime )
                  || (true == mvControlled->Mains) ) ?
                     true :
                     false ) );
-            // NOTE: 'off' variant uses the same test, but opposite resulting states
             btLampkaWylSzybkiOff.Turn(
-                ( ( ( m_linebreakerstate == 2 )
+                ( ( ( mvControlled->MainsInitTimeCountdown > 0.0 )
+                 || ( fHVoltage == 0.0 )
+                 || ( m_linebreakerstate == 2 )
                  || ( true == mvControlled->Mains ) ) ?
                     false :
                     true ) );
@@ -5860,7 +5892,7 @@ bool TTrain::Update( double const Deltatime )
                     auto const *mover { tmp->MoverParameters };
 
                     btLampkaWylSzybkiB.Turn( mover->Mains );
-                    btLampkaWylSzybkiBOff.Turn( false == mover->Mains );
+                    btLampkaWylSzybkiBOff.Turn( ( false == mover->Mains ) && ( mover->MainsInitTimeCountdown <= 0.0 ) && ( fHVoltage != 0.0 ) );
 
                     btLampkaOporyB.Turn(mover->ResistorsFlagCheck());
                     btLampkaBezoporowaB.Turn(
@@ -6115,6 +6147,7 @@ bool TTrain::Update( double const Deltatime )
         ggRadioChannelNext.Update();
         ggRadioStop.Update();
         ggRadioTest.Update();
+        ggRadioCall3.Update();
         ggDepartureSignalButton.Update();
 
         ggPantFrontButton.Update();
@@ -7332,6 +7365,7 @@ void TTrain::clear_cab_controls()
     ggRadioChannelNext.Clear();
     ggRadioStop.Clear();
     ggRadioTest.Clear();
+    ggRadioCall3.Clear();
     ggDoorLeftPermitButton.Clear();
     ggDoorRightPermitButton.Clear();
     ggDoorPermitPresetButton.Clear();
@@ -7649,7 +7683,7 @@ void TTrain::set_cab_controls( int const Cab ) {
         TimetableLightActive ?
             1.f :
             0.f ) );
-    // doors
+    // doors permits
     if( ggDoorLeftPermitButton.type() != TGaugeType::push ) {
         ggDoorLeftPermitButton.PutValue( mvOccupied->Doors.instances[ ( mvOccupied->ActiveCab == 1 ? side::left : side::right ) ].open_permit ? 1.f : 0.f );
     }
@@ -7657,6 +7691,7 @@ void TTrain::set_cab_controls( int const Cab ) {
         ggDoorRightPermitButton.PutValue( mvOccupied->Doors.instances[ ( mvOccupied->ActiveCab == 1 ? side::right : side::left ) ].open_permit ? 1.f : 0.f );
     }
     ggDoorPermitPresetButton.PutValue( mvOccupied->Doors.permit_preset );
+    // door controls
     ggDoorLeftButton.PutValue( mvOccupied->Doors.instances[ ( mvOccupied->ActiveCab == 1 ? side::left : side::right ) ].is_closed ? 0.f : 1.f );
     ggDoorRightButton.PutValue( mvOccupied->Doors.instances[ ( mvOccupied->ActiveCab == 1 ? side::right : side::left ) ].is_closed ? 0.f : 1.f );
     // door lock
@@ -8017,6 +8052,7 @@ bool TTrain::initialize_gauge(cParser &Parser, std::string const &Label, int con
         { "radiochannelnext_sw:", ggRadioChannelNext },
         { "radiostop_sw:", ggRadioStop },
         { "radiotest_sw:", ggRadioTest },
+        { "radiocall3_sw:", ggRadioCall3 },
         { "pantfront_sw:", ggPantFrontButton },
         { "pantrear_sw:", ggPantRearButton },
         { "pantfrontoff_sw:", ggPantFrontButtonOff },

Train.h

@@ -342,6 +342,7 @@ class TTrain
     static void OnCommand_radiochanneldecrease( TTrain *Train, command_data const &Command );
     static void OnCommand_radiostopsend( TTrain *Train, command_data const &Command );
     static void OnCommand_radiostoptest( TTrain *Train, command_data const &Command );
+    static void OnCommand_radiocall3send( TTrain *Train, command_data const &Command );
     static void OnCommand_cabchangeforward( TTrain *Train, command_data const &Command );
     static void OnCommand_cabchangebackward( TTrain *Train, command_data const &Command );
     static void OnCommand_generictoggle( TTrain *Train, command_data const &Command );
@@ -412,6 +413,7 @@ public: // reszta może by?publiczna
     TGauge ggRadioChannelNext;
     TGauge ggRadioTest;
     TGauge ggRadioStop;
+    TGauge ggRadioCall3;
     TGauge ggUpperLightButton;
     TGauge ggLeftLightButton;
     TGauge ggRightLightButton;

TrkFoll.cpp

@@ -95,7 +95,7 @@ bool TTrackFollower::Move(double fDistance, bool bPrimary)
 { // przesuwanie wózka po torach o odległość (fDistance), z wyzwoleniem eventów
     // bPrimary=true - jest pierwszą osią w pojeździe, czyli generuje eventy i przepisuje pojazd
     // Ra: zwraca false, jeśli pojazd ma być usunięty
-    auto const ismoving { ( std::abs( fDistance ) > 0.01 ) && ( Owner->GetVelocity() > 0.01 ) };
+    auto const ismoving { /* ( std::abs( fDistance ) > 0.01 ) && */ ( Owner->GetVelocity() > 0.01 ) };
     fDistance *= fDirection; // dystans mnożnony przez kierunek
     double s; // roboczy dystans
     double dir; // zapamiętany kierunek do sprawdzenia, czy się zmienił

command.cpp

@@ -123,6 +123,7 @@ commanddescription_sequence Commands_descriptions = {
     { "radiochanneldecrease", command_target::vehicle, command_mode::oneoff },
     { "radiostopsend", command_target::vehicle, command_mode::oneoff },
     { "radiostoptest", command_target::vehicle, command_mode::oneoff },
+    { "radiocall3send", command_target::vehicle, command_mode::oneoff },
     // TBD, TODO: make cab change controls entity-centric
     { "cabchangeforward", command_target::vehicle, command_mode::oneoff },
     { "cabchangebackward", command_target::vehicle, command_mode::oneoff },

command.h

@@ -118,6 +118,7 @@ enum class user_command {
     radiochanneldecrease,
     radiostopsend,
     radiostoptest,
+    radiocall3send,
     cabchangeforward,
     cabchangebackward,
 

driverkeyboardinput.cpp

@@ -128,6 +128,7 @@ driverkeyboard_input::default_bindings() {
         { user_command::radiochanneldecrease, GLFW_KEY_R },
         { user_command::radiostopsend, GLFW_KEY_PAUSE | keymodifier::shift | keymodifier::control },
         { user_command::radiostoptest, GLFW_KEY_R | keymodifier::shift | keymodifier::control },
+        { user_command::radiocall3send, GLFW_KEY_BACKSPACE },
         { user_command::cabchangeforward, GLFW_KEY_HOME },
         { user_command::cabchangebackward, GLFW_KEY_END },
         // viewturn,

drivermouseinput.cpp

@@ -712,6 +712,9 @@ drivermouse_input::default_bindings() {
         { "radiotest_sw:", {
             user_command::radiostoptest,
             user_command::none } },
+        { "radiocall3_sw:", {
+            user_command::radiocall3send,
+            user_command::none } },
         { "pantfront_sw:", {
             user_command::pantographtogglefront,
             user_command::none } },

driveruilayer.cpp

@@ -35,7 +35,7 @@ driver_ui::driver_ui() {
     m_scenariopanel.size_max = { Global.iWindowWidth * 0.95, Global.iWindowHeight * 0.95 };
 
     m_timetablepanel.title = locale::strings[ locale::string::driver_timetable_header ];
-    m_timetablepanel.size_min = { 435, 110 };
+    m_timetablepanel.size_min = { 435, 70 };
     m_timetablepanel.size_max = { 435, Global.iWindowHeight * 0.95 };
 
     m_transcriptspanel.title = locale::strings[ locale::string::driver_transcripts_header ];

driveruipanels.cpp

@@ -16,6 +16,7 @@ http://mozilla.org/MPL/2.0/.
 #include "simulationtime.h"
 #include "Timer.h"
 #include "Event.h"
+#include "TractionPower.h"
 #include "Camera.h"
 #include "mtable.h"
 #include "Train.h"
@@ -265,23 +266,23 @@ timetable_panel::update() {
     auto const *table = owner->TrainTimetable();
     if( table == nullptr ) { return; }
 
-    { // destination
+    // destination
+    {
         auto textline = Bezogonkow( owner->Relation(), true );
         if( false == textline.empty() ) {
             textline += " (" + Bezogonkow( owner->TrainName(), true ) + ")";
         }
-
         text_lines.emplace_back( textline, Global.UITextColor );
     }
 
-    { // next station
+    if( false == is_expanded ) {
+        // next station
         auto const nextstation = owner->NextStop();
         if( false == nextstation.empty() ) {
             // jeśli jest podana relacja, to dodajemy punkt następnego zatrzymania
             auto textline = " -> " + nextstation;
 
             text_lines.emplace_back( textline, Global.UITextColor );
-            text_lines.emplace_back( "", Global.UITextColor );
         }
     }
 
@@ -309,7 +310,6 @@ timetable_panel::update() {
                 static_cast<int>( consistlength ) );
 
             text_lines.emplace_back( m_buffer.data(), Global.UITextColor );
-            text_lines.emplace_back( "", Global.UITextColor );
         }
 
         if( 0 == table->StationCount ) {
@@ -377,24 +377,26 @@ timetable_panel::update() {
                     candeparture ? readycolor : // czas minął i odjazd był, to nazwa stacji będzie na zielono
                     isatpassengerstop ? waitcolor :
                     Global.UITextColor ) };
+                auto const trackcount{ ( tableline->TrackNo == 1 ? u8" ┃  " : u8" ║  " ) };
                 m_tablelines.emplace_back(
-                    ( u8"│ " + vmax + u8" │ " + station + u8" │  " + arrival + u8" │ " + traveltime + u8" │" ),
+                    ( u8"│ " + vmax + u8" │ " + station + trackcount + arrival + u8" │ " + traveltime + u8" │" ),
                     linecolor );
                 m_tablelines.emplace_back(
-                    ( u8"│     │ " + location + tableline->StationWare + u8" │  " + departure + u8" │     │" ),
+                    ( u8"│     │ " + location + tableline->StationWare + trackcount + departure + u8" │     │" ),
                     linecolor );
                 // divider/footer
                 if( i < table->StationCount ) {
                     auto const *nexttableline { tableline + 1 };
-                    if( tableline->vmax == nexttableline->vmax ) {
+                    std::string const vmaxnext{ ( tableline->vmax == nexttableline->vmax ? u8"│     ├" : u8"├─────┼" ) };
-                        m_tablelines.emplace_back( u8"│     ├────────────────────────────────────┼─────────┼─────┤", Global.UITextColor );
+                    auto const trackcountnext{ ( nexttableline->TrackNo == 1 ? u8"╂" : u8"╫" ) };
+                    m_tablelines.emplace_back(
+                        vmaxnext + u8"────────────────────────────────────" + trackcountnext + u8"─────────┼─────┤",
+                        Global.UITextColor );
                 }
                 else {
-                        m_tablelines.emplace_back( u8"├─────┼────────────────────────────────────┼─────────┼─────┤", Global.UITextColor );
+                    m_tablelines.emplace_back(
-                    }
+                        u8"└─────┴────────────────────────────────────┴─────────┴─────┘",
-                }
+                        Global.UITextColor );
-                else {
-                    m_tablelines.emplace_back( u8"└─────┴────────────────────────────────────┴─────────┴─────┘", Global.UITextColor );
                 }
             }
         }
@@ -474,6 +476,7 @@ debug_panel::update() {
     m_scantablelines.clear();
     m_scenariolines.clear();
     m_eventqueuelines.clear();
+    m_powergridlines.clear();
     m_cameralines.clear();
     m_rendererlines.clear();
 
@@ -483,6 +486,7 @@ debug_panel::update() {
     update_section_scantable( m_scantablelines );
     update_section_scenario( m_scenariolines );
     update_section_eventqueue( m_eventqueuelines );
+    update_section_powergrid( m_powergridlines );
     update_section_camera( m_cameralines );
     update_section_renderer( m_rendererlines );
 }
@@ -524,19 +528,17 @@ debug_panel::render() {
             // event queue filter
             ImGui::Checkbox( "By This Vehicle Only", &m_eventqueueactivevehicleonly );
         }
+        if( true == render_section( "Power Grid", m_powergridlines ) ) {
+            // traction state debug
+            ImGui::Checkbox(
+			        "Traction debug",
+			        &GfxRenderer.settings.traction_debug );
+        }
         render_section( "Camera", m_cameralines );
         render_section( "Gfx Renderer", m_rendererlines );
         // toggles
         ImGui::Separator();
         ImGui::Checkbox( "Debug Mode", &DebugModeFlag );
-        if( DebugModeFlag )
-        {
-            ImGui::Indent();
-            ImGui::Checkbox(
-                    "Draw normal traction",
-                    &GfxRenderer.settings.force_normal_traction_render );
-            ImGui::Unindent();
-        }
     }
     ImGui::End();
 }
@@ -588,14 +590,17 @@ debug_panel::update_section_vehicle( std::vector<text_line> &Output ) {
         ( mover.ConvOvldFlag ? '!' : '.' ),
         ( mover.CompressorFlag ? 'C' : ( false == mover.CompressorAllowLocal ? '-' : ( ( mover.CompressorAllow || mover.CompressorStart == start_t::automatic ) ? 'c' : '.' ) ) ),
         ( mover.CompressorGovernorLock ? '!' : '.' ),
+        ( mover.Heating ? 'H' : ( mover.HeatingAllow ? 'h' : '.' ) ),
         std::string( isplayervehicle ? locale::strings[ locale::string::debug_vehicle_radio ] + ( mover.Radio ? std::to_string( m_input.train->RadioChannel() ) : "-" ) : "" ).c_str(),
         std::string( isdieselenginepowered ? locale::strings[ locale::string::debug_vehicle_oilpressure ] + to_string( mover.OilPump.pressure, 2 )  : "" ).c_str(),
         // power transfers
         mover.Couplers[ end::front ].power_high.voltage,
         mover.Couplers[ end::front ].power_high.current,
-        std::string( mover.Couplers[ end::front ].power_high.local ? "" : "-" ).c_str(),
+        std::string( mover.Couplers[ end::front ].power_high.is_local ? "" : "-" ).c_str(),
-        std::string( vehicle.DirectionGet() ? ":<<:" : ":>>:" ).c_str(),
+        std::string( vehicle.DirectionGet() ? ":<<" : ":>>" ).c_str(),
-        std::string( mover.Couplers[ end::rear ].power_high.local ? "" : "-" ).c_str(),
+        mover.Voltage,
+        std::string( vehicle.DirectionGet() ? "<<:" : ">>:" ).c_str(),
+        std::string( mover.Couplers[ end::rear ].power_high.is_local ? "" : "-" ).c_str(),
         mover.Couplers[ end::rear ].power_high.voltage,
         mover.Couplers[ end::rear ].power_high.current );
 
@@ -805,7 +810,11 @@ debug_panel::update_section_engine( std::vector<text_line> &Output ) {
             { "hTCTI: ", mover.hydro_TC_TorqueIn },
             { "hTCTO: ", mover.hydro_TC_TorqueOut },
             { "hTCfl: ", mover.hydro_TC_Fill },
-            { "hTCLR: ", mover.hydro_TC_LockupRate } };
+            { "hRtFl: ", mover.hydro_R_Fill } ,
+			{ " hRtn: ", mover.hydro_R_n } ,
+			{ "hRtTq: ", mover.hydro_R_Torque }
+		
+		};
         for( auto const &parameter : hydrovalues ) {
             parameterstext += "\n" + parameter.first + to_string( parameter.second, 2, 9 );
         }
@@ -890,7 +899,10 @@ debug_panel::update_section_ai( std::vector<text_line> &Output ) {
         + "\n brake threshold: " + to_string( mechanik.fAccThreshold, 2 )
         + ", delays: " + to_string( mechanik.fBrake_a0[ 0 ], 2 )
         + "+" + to_string( mechanik.fBrake_a1[ 0 ], 2 )
-		+ "\n virtual brake position: " + to_string(mechanik.BrakeCtrlPosition, 2);
+		+ "\n virtual brake position: " + to_string(mechanik.BrakeCtrlPosition, 2)
+		+ "\n desired diesel percentage: " + to_string(mechanik.DizelPercentage, 0)
+	    + "/" + to_string(mechanik.DizelPercentage_Speed, 0)
+		+ "/" + to_string(100.4*mechanik.mvControlling->eimic_real, 0);
 
     Output.emplace_back( textline, Global.UITextColor );
 
@@ -988,6 +1000,46 @@ debug_panel::update_section_eventqueue( std::vector<text_line> &Output ) {
     }
 }
 
+void
+debug_panel::update_section_powergrid( std::vector<text_line> &Output ) {
+
+    auto const lowpowercolor { glm::vec4( 164.0f / 255.0f, 132.0f / 255.0f, 84.0f / 255.0f, 1.f ) };
+    auto const nopowercolor { glm::vec4( 164.0f / 255.0f, 84.0f / 255.0f, 84.0f / 255.0f, 1.f ) };
+
+    Output.emplace_back( "Name:               Output:   Timeout:", Global.UITextColor );
+
+    std::string textline;
+
+    for( auto const *powerstation : simulation::Powergrid.sequence() ) {
+
+        if( true == powerstation->bSection ) { continue; }
+
+        auto const name { (
+            powerstation->m_name.empty() ?
+                "(unnamed)" :
+                powerstation->m_name )
+            + "                              " };
+
+        textline =
+            name.substr( 0, 20 )
+            + " " + to_string( powerstation->OutputVoltage, 0, 5 )
+            + " " + to_string( powerstation->FuseTimer, 1, 12 )
+            + ( powerstation->FuseCounter == 0 ?
+                "" :
+                " (x" + to_string( powerstation->FuseCounter ) + ")" );
+
+        Output.emplace_back(
+            textline,
+            ( ( powerstation->FastFuse || powerstation->SlowFuse ) ? nopowercolor :
+              powerstation->OutputVoltage < ( 0.8 * powerstation->NominalVoltage ) ? lowpowercolor :
+              Global.UITextColor ) );
+    }
+
+    if( Output.size() == 1 ) {
+        Output.front().data = "(no power stations)";
+    }
+}
+
 void
 debug_panel::update_section_camera( std::vector<text_line> &Output ) {
 

driveruipanels.h

@@ -87,6 +87,7 @@ private:
     void update_section_scantable( std::vector<text_line> &Output );
     void update_section_scenario( std::vector<text_line> &Output );
     void update_section_eventqueue( std::vector<text_line> &Output );
+    void update_section_powergrid( std::vector<text_line> &Output );
     void update_section_camera( std::vector<text_line> &Output );
     void update_section_renderer( std::vector<text_line> &Output );
     // section update helpers
@@ -105,6 +106,7 @@ private:
         m_cameralines,
         m_scenariolines,
         m_eventqueuelines,
+        m_powergridlines,
         m_rendererlines;
     int tprev { 0 }; // poprzedni czas
     double VelPrev { 0.0 }; // poprzednia prędkość

mtable.cpp

@@ -549,6 +549,7 @@ void TTrainParameters::serialize( dictionary_source *Output ) const {
             Output->insert( ( stationlabel + "am" ), timetableline.Am );
             Output->insert( ( stationlabel + "dh" ), timetableline.Dh );
             Output->insert( ( stationlabel + "dm" ), timetableline.Dm );
+            Output->insert( ( stationlabel + "tracks" ), timetableline.TrackNo );
         }
     }
 }

renderer.cpp

@@ -496,10 +496,10 @@ opengl_renderer::Render_pass( rendermode const Mode ) {
 
                 // run shadowmaps pass before color
                 Timer::subsystem.gfx_shadows.start();
-                Render_pass( rendermode::shadows );
                 if( false == FreeFlyModeFlag ) {
                     Render_pass( rendermode::cabshadows );
                 }
+                Render_pass( rendermode::shadows );
                 Timer::subsystem.gfx_shadows.stop();
                 m_debugtimestext += "shadows: " + to_string( Timer::subsystem.gfx_shadows.average(), 2 ) + " msec (" + std::to_string( m_cellqueue.size() ) + " sectors)\n";
 #ifdef EU07_USE_DEBUG_SHADOWMAP
@@ -689,7 +689,6 @@ opengl_renderer::Render_pass( rendermode const Mode ) {
                 // setup
                 ::glEnable( GL_POLYGON_OFFSET_FILL ); // alleviate depth-fighting
                 ::glPolygonOffset( 1.f, 1.f );
-                ::glDisable( GL_CULL_FACE );
 
                 ::glBindFramebufferEXT( GL_FRAMEBUFFER, m_cabshadowframebuffer );
                 ::glViewport( 0, 0, m_shadowbuffersize / 2, m_shadowbuffersize / 2 );
@@ -712,6 +711,11 @@ opengl_renderer::Render_pass( rendermode const Mode ) {
 #else
                 setup_units( false, false, false );
 #endif
+                ::glDisable( GL_CULL_FACE );
+
+                if( Global.RenderCabShadowsRange > 0 ) {
+                    Render( simulation::Region );
+                }
                 Render_cab( simulation::Train->Dynamic(), 0.f, false );
                 Render_cab( simulation::Train->Dynamic(), 0.f, true );
                 m_cabshadowpass = m_renderpass;
@@ -856,7 +860,7 @@ opengl_renderer::setup_pass( renderpass_config &Config, rendermode const Mode, f
     switch( Mode ) {
         case rendermode::color:        { Config.draw_range = Global.BaseDrawRange; break; }
         case rendermode::shadows:      { Config.draw_range = Global.BaseDrawRange * 0.5f; break; }
-        case rendermode::cabshadows:   { Config.draw_range = simulation::Train->Occupied()->Dim.L; break; }
+        case rendermode::cabshadows:   { Config.draw_range = ( Global.RenderCabShadowsRange > 0 ? clamp( Global.RenderCabShadowsRange, 5, 100 ) : simulation::Train->Occupied()->Dim.L ); break; }
         case rendermode::reflections:  { Config.draw_range = Global.BaseDrawRange; break; }
         case rendermode::pickcontrols: { Config.draw_range = 50.f; break; }
         case rendermode::pickscenery:  { Config.draw_range = Global.BaseDrawRange * 0.5f; break; }
@@ -1746,6 +1750,7 @@ opengl_renderer::Render( scene::basic_region *Region ) {
             break;
         }
         case rendermode::shadows:
+        case rendermode::cabshadows:
         case rendermode::pickscenery: {
             // these render modes don't bother with lights
             Render( std::begin( m_sectionqueue ), std::end( m_sectionqueue ) );
@@ -1776,7 +1781,8 @@ opengl_renderer::Render( section_sequence::iterator First, section_sequence::ite
 
             break;
         }
-        case rendermode::shadows: {
+        case rendermode::shadows:
+        case rendermode::cabshadows: {
             // experimental, for shadows render both back and front faces, to supply back faces of the 'forest strips'
             ::glDisable( GL_CULL_FACE );
             break; }
@@ -1799,6 +1805,7 @@ opengl_renderer::Render( section_sequence::iterator First, section_sequence::ite
             case rendermode::color:
             case rendermode::reflections:
             case rendermode::shadows:
+            case rendermode::cabshadows:
             case rendermode::pickscenery: {
                 if( false == section->m_shapes.empty() ) {
                     // since all shapes of the section share center point we can optimize out a few calls here
@@ -1822,6 +1829,7 @@ opengl_renderer::Render( section_sequence::iterator First, section_sequence::ite
         switch( m_renderpass.draw_mode ) {
             case rendermode::color:
             case rendermode::shadows:
+            case rendermode::cabshadows:
             case rendermode::pickscenery: {
                 for( auto &cell : section->m_cells ) {
                     if( ( true == cell.m_active )
@@ -1845,7 +1853,8 @@ opengl_renderer::Render( section_sequence::iterator First, section_sequence::ite
     }
 
     switch( m_renderpass.draw_mode ) {
-        case rendermode::shadows: {
+        case rendermode::shadows:
+        case rendermode::cabshadows: {
             // restore standard face cull mode
             ::glEnable( GL_CULL_FACE );
             break; }
@@ -1932,6 +1941,22 @@ opengl_renderer::Render( cell_sequence::iterator First, cell_sequence::iterator
 
                 break;
             }
+            case rendermode::cabshadows: {
+                // since all shapes of the section share center point we can optimize out a few calls here
+                ::glPushMatrix();
+                auto const originoffset { cell->m_area.center - m_renderpass.camera.position() };
+                ::glTranslated( originoffset.x, originoffset.y, originoffset.z );
+
+                // render
+                // opaque non-instanced shapes
+                for( auto const &shape : cell->m_shapesopaque ) { Render( shape, false ); }
+                // NOTE: tracks aren't likely to cast shadows into the cab, so we skip them in this pass
+
+                // post-render cleanup
+                ::glPopMatrix();
+
+                break;
+            }
             case rendermode::pickscenery: {
                 // same procedure like with regular render, but editor-enabled nodes receive custom colour used for picking
                 // since all shapes of the section share center point we can optimize out a few calls here
@@ -1970,7 +1995,8 @@ opengl_renderer::Render( cell_sequence::iterator First, cell_sequence::iterator
 
         switch( m_renderpass.draw_mode ) {
             case rendermode::color:
-            case rendermode::shadows: {
+            case rendermode::shadows:
+            case rendermode::cabshadows: {
                 // opaque parts of instanced models
                 for( auto *instance : cell->m_instancesopaque ) { Render( instance ); }
                 // opaque parts of vehicles
@@ -2061,7 +2087,8 @@ opengl_renderer::Render( scene::shape_node const &Shape, bool const Ignorerange
     if( false == Ignorerange ) {
         double distancesquared;
         switch( m_renderpass.draw_mode ) {
-            case rendermode::shadows: {
+            case rendermode::shadows:
+            case rendermode::cabshadows: {
                 // 'camera' for the light pass is the light source, but we need to draw what the 'real' camera sees
                 distancesquared = Math3D::SquareMagnitude( ( data.area.center - Global.pCamera.Pos ) / Global.ZoomFactor ) / Global.fDistanceFactor;
                 break;
@@ -2093,6 +2120,7 @@ opengl_renderer::Render( scene::shape_node const &Shape, bool const Ignorerange
         }
         // pick modes are painted with custom colours, and shadow pass doesn't use any
         case rendermode::shadows:
+        case rendermode::cabshadows:
         case rendermode::pickscenery:
         case rendermode::pickcontrols:
         default: {
@@ -2115,7 +2143,8 @@ opengl_renderer::Render( TAnimModel *Instance ) {
 
     double distancesquared;
     switch( m_renderpass.draw_mode ) {
-        case rendermode::shadows: {
+        case rendermode::shadows:
+        case rendermode::cabshadows: {
             // 'camera' for the light pass is the light source, but we need to draw what the 'real' camera sees
             distancesquared = Math3D::SquareMagnitude( ( Instance->location() - Global.pCamera.Pos ) / Global.ZoomFactor ) / Global.fDistanceFactor;
             break;
@@ -2129,6 +2158,11 @@ opengl_renderer::Render( TAnimModel *Instance ) {
      || ( distancesquared >= Instance->m_rangesquaredmax ) ) {
         return;
     }
+    // crude way to reject early items too far to affect the output (mostly relevant for shadow passes)
+    auto const drawdistancethreshold{ m_renderpass.draw_range + 250 };
+    if( distancesquared > drawdistancethreshold * drawdistancethreshold ) {
+        return;
+    }
 
     switch( m_renderpass.draw_mode ) {
         case rendermode::pickscenery: {
@@ -2161,17 +2195,23 @@ opengl_renderer::Render( TDynamicObject *Dynamic ) {
     if( false == Dynamic->renderme ) {
         return false;
     }
-    // debug data
-    ++m_debugstats.dynamics;
 
-    // setup
-    TSubModel::iInstance = reinterpret_cast<std::uintptr_t>( Dynamic ); //żeby nie robić cudzych animacji
-    glm::dvec3 const originoffset = Dynamic->vPosition - m_renderpass.camera.position();
     // lod visibility ranges are defined for base (x 1.0) viewing distance. for render we adjust them for actual range multiplier and zoom
     float squaredistance;
+    glm::dvec3 const originoffset = Dynamic->vPosition - m_renderpass.camera.position();
     switch( m_renderpass.draw_mode ) {
         case rendermode::shadows: {
             squaredistance = glm::length2( glm::vec3{ glm::dvec3{ Dynamic->vPosition - Global.pCamera.Pos } } / Global.ZoomFactor ) / Global.fDistanceFactor;
+            if( false == FreeFlyModeFlag ) {
+                // filter out small details if we're in vehicle cab
+                squaredistance = std::max( 100.f * 100.f, squaredistance );
+            }
+            break;
+        }
+        case rendermode::cabshadows: {
+            squaredistance = glm::length2( glm::vec3{ glm::dvec3{ Dynamic->vPosition - Global.pCamera.Pos } } / Global.ZoomFactor ) / Global.fDistanceFactor;
+            // filter out small details
+            squaredistance = std::max( 100.f * 100.f, squaredistance );
             break;
         }
         default: {
@@ -2179,6 +2219,18 @@ opengl_renderer::Render( TDynamicObject *Dynamic ) {
             break;
         }
     }
+
+    // crude way to reject early items too far to affect the output (mostly relevant for shadow passes)
+    auto const drawdistancethreshold { m_renderpass.draw_range + 250 };
+    if( squaredistance > drawdistancethreshold * drawdistancethreshold ) {
+        return false;
+    }
+
+    // debug data
+    ++m_debugstats.dynamics;
+
+    // setup
+    TSubModel::iInstance = reinterpret_cast<std::uintptr_t>( Dynamic ); //żeby nie robić cudzych animacji
     Dynamic->ABuLittleUpdate( squaredistance ); // ustawianie zmiennych submodeli dla wspólnego modelu
     ::glPushMatrix();
 
@@ -2233,7 +2285,8 @@ opengl_renderer::Render( TDynamicObject *Dynamic ) {
             }
             break;
         }
-        case rendermode::shadows: {
+        case rendermode::shadows:
+        case rendermode::cabshadows: {
             if( Dynamic->mdLowPolyInt ) {
                 // low poly interior
 //                if( FreeFlyModeFlag ? true : !Dynamic->mdKabina || !Dynamic->bDisplayCab ) {
@@ -2781,7 +2834,8 @@ opengl_renderer::Render( scene::basic_cell::path_sequence::const_iterator First,
     ::glColor3fv( glm::value_ptr( colors::white ) );
     // setup
     switch( m_renderpass.draw_mode ) {
-        case rendermode::shadows: {
+        case rendermode::shadows:
+        case rendermode::cabshadows: {
             // NOTE: roads-based platforms tend to miss parts of shadows if rendered with either back or front culling
             ::glDisable( GL_CULL_FACE );
             break;
@@ -2821,7 +2875,8 @@ opengl_renderer::Render( scene::basic_cell::path_sequence::const_iterator First,
                 }
                 break;
             }
-            case rendermode::shadows: {
+            case rendermode::shadows:
+            case rendermode::cabshadows: {
                 if( ( std::abs( track->fTexHeight1 ) < 0.35f )
                  || ( track->iCategoryFlag != 2 ) ) {
                     // shadows are only calculated for high enough roads, typically meaning track platforms
@@ -2864,7 +2919,8 @@ opengl_renderer::Render( scene::basic_cell::path_sequence::const_iterator First,
                 }
                break;
             }
-            case rendermode::shadows: {
+            case rendermode::shadows:
+            case rendermode::cabshadows: {
                 if( ( std::abs( track->fTexHeight1 ) < 0.35f )
                  || ( ( track->iCategoryFlag == 1 )
                    && ( track->eType != tt_Normal ) ) ) {
@@ -2911,7 +2967,8 @@ opengl_renderer::Render( scene::basic_cell::path_sequence::const_iterator First,
                 }
                 break;
             }
-            case rendermode::shadows: {
+            case rendermode::shadows:
+            case rendermode::cabshadows: {
                 if( ( std::abs( track->fTexHeight1 ) < 0.35f )
                  || ( ( track->iCategoryFlag == 1 )
                    && ( track->eType != tt_Normal ) ) ) {
@@ -2931,7 +2988,8 @@ opengl_renderer::Render( scene::basic_cell::path_sequence::const_iterator First,
     }
     // post-render reset
     switch( m_renderpass.draw_mode ) {
-        case rendermode::shadows: {
+        case rendermode::shadows:
+        case rendermode::cabshadows: {
             ::glEnable( GL_CULL_FACE );
             break;
         }
@@ -2950,7 +3008,8 @@ opengl_renderer::Render( TMemCell *Memcell ) {
 
     switch( m_renderpass.draw_mode ) {
         case rendermode::color:
-        case rendermode::shadows: {
+        case rendermode::shadows:
+        case rendermode::cabshadows: {
             ::gluSphere( m_quadric, 0.35, 4, 2 );
             break;
         }

renderer.h

@@ -119,8 +119,7 @@ public:
     /// Renderer runtime settings.
     struct Settings
     {
-        /** Force normal render of traction, when user is in debug mode. */
+		bool traction_debug { false };
-        bool force_normal_traction_render { false };
     } settings;
 // constructors
     opengl_renderer() = default;

simulationstateserializer.cpp

@@ -523,9 +523,12 @@ state_serializer::deserialize_node( cParser &Input, scene::scratch_data &Scratch
         }
         else {
             scene::Groups.insert( scene::Groups.handle(), eventlauncher );
+            if( false == eventlauncher->IsRadioActivated() ) {
+                // NOTE: radio-activated launchers due to potentially large activation radius are resolved on global level rather than put in a region cell
                 simulation::Region->insert( eventlauncher );
             }
         }
+    }
     else if( nodedata.type == "sound" ) {
 
         auto *sound { deserialize_sound( Input, Scratchpad, nodedata ) };

translation.cpp

@@ -70,7 +70,7 @@ init() {
         "Name: %s%s\nLoad: %.0f %s\nStatus: %s%s\nCouplers:\n front: %s\n rear:  %s",
         ", owned by: ",
         "none",
-        "Devices: %c%c%c%c%c%c%c%c%c%c%c%c%c%c%s%s\nPower transfers: %.0f@%.0f%s%s%s%.0f@%.0f",
+        "Devices: %c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%s%s\nPower transfers: %.0f@%.0f%s%s[%.0f]%s%s%.0f@%.0f",
         " radio: ",
         " oil pressure: ",
         "Controllers:\n master: %d(%d), secondary: %s\nEngine output: %.1f, current: %.0f\nRevolutions:\n engine: %.0f, motors: %.0f\n engine fans: %.0f, motor fans: %.0f+%.0f, cooling fans: %.0f+%.0f",
@@ -157,6 +157,7 @@ init() {
         "radio channel",
         "radiostop test",
         "radiostop",
+        "radio call 3",
         "pantograph A",
         "pantograph B",
         "pantograph A",
@@ -236,7 +237,7 @@ init() {
         "Nazwa: %s%s\nLadunek: %.0f %s\nStatus: %s%s\nSprzegi:\n przedni: %s\n tylny:   %s",
         ", wlasciciel: ",
         "wolny",
-        "Urzadzenia: %c%c%c%c%c%c%c%c%c%c%c%c%c%c%s%s\nTransfer pradow: %.0f@%.0f%s%s%s%.0f@%.0f",
+        "Urzadzenia: %c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%s%s\nTransfer pradow: %.0f@%.0f%s%s[%.0f]%s%s%.0f@%.0f",
         " radio: ",
         " cisn.oleju: ",
         "Nastawniki:\n glowny: %d(%d), dodatkowy: %s\nMoc silnika: %.1f, prad silnika: %.0f\nObroty:\n silnik: %.0f, motory: %.0f\n went.silnika: %.0f, went.motorow: %.0f+%.0f, went.chlodnicy: %.0f+%.0f",
@@ -323,6 +324,7 @@ init() {
         "kanal radia",
         "test radiostopu",
         "radiostop",
+        "zew 3",
         "pantograf A",
         "pantograf B",
         "pantograf A",
@@ -442,6 +444,7 @@ init() {
             "radiochannelnext_sw:",
             "radiotest_sw:",
             "radiostop_sw:",
+            "radiocall3_sw:",
             "pantfront_sw:",
             "pantrear_sw:",
             "pantfrontoff_sw:",

translation.h

@@ -146,6 +146,7 @@ enum string {
     cab_radiochannelnext_sw,
     cab_radiotest_sw,
     cab_radiostop_sw,
+    cab_radiocall3_sw,
     cab_pantfront_sw,
     cab_pantrear_sw,
     cab_pantfrontoff_sw,

version.h

@@ -1 +1 @@
-#define VERSION_INFO "M7 23.05.2019"
+#define VERSION_INFO "M7 13.07.2019"