The track mode Kilometrage (X, under More) puts a point of the km where a track is clicked: the line, the km and, at a jump,
the km on from it. The axis of a line follows the main paths of the switches through the tracks of its points; on a
double-track line it runs between the tracks, and where they part on formations of their own and come together again it
runs along the longer one, the shorter one going by its own length with its last hectometre before they meet taking up
the difference (PKP GK-1 6.1.12). The km between the points are stretched to the length of the scenery evenly; the panel
lists the points with the stretch, the 3D view shows the axis, a tick at each hectometre, the points with their km and
the km of the lines by the mouse. Read the km from the posts turns the hectometre posts along the line into the points
of its km, a jump where two runs of numbers meet, and warns of a jump on a curve or at a station (Id-1 § 19). Each change
is a step of undo.
The free laying isn't the default any more. The first time a session opens the laying or the plan, a window asks how the
new tracks are laid, with the two cards of the panels (the norms marked as chosen); a click on one of them takes it and
closes the window, which comes before the offer of the terrain model of a new scenery. "Remember the choice, don't ask
again" keeps it in eu07_editor.ini (track_norms ask, free or plk), and a choice kept follows a later click on the cards of
the panels; the settings of the editor (General) choose between asking and either way. The self-test scripts start with the
free laying, as they were written for it.
M in any tab of the track mode turns the tape on: a click puts its start, the next one its end, at a free end, on the axis
of the track under the cursor or else on the ground. The readout at the cursor gives the distance in plan and in space,
the difference of height and the grade between them and the azimuth, while the second point follows the cursor and once
it's put; a further click starts a new measure, M or Esc puts the tape away. Self-test command tape.
In the top view at a metre a pixel or closer, each curved track of 5 m or more gets "R 600 L 120" by its middle and each
switch its name and its type from the kept switch record ("Rz 60E1-300-1:9 P") by its start, on a dark plate as on a plan.
A label which would cover another one is left out, the switches going first and then the sharper curves. View > Track labels
in the top view switches them off.
View > Track colours draws the rail tracks over the view in bands of the radius of their paths, of their speed or of the grade
along them, from above over the whole view and in the 3D view within 1.5 km of the camera, with the legend of the bands in
the bottom right corner. Plain keeps the lines of the top view as they were. Self-test command trackcolours.
The panel gives the place on the map or typed, the area, one main button, a
progress bar with Stop and a banner over the view while it loads. The terrain
grown ahead of a track goes on at the height of the one beside it and skips
the ground made by hand. The formations follow the tracks moved, laid and
removed, in the same step of the history; a whole load is one step, the
ground grown ahead none.
An error put in the status bar also shows for 4 s by the cursor, and the
refusals the tools kept in their panels (a curve which can't be laid,
a switch which doesn't fit, a signal which can't be moved, a drive
without the variant) go there as well.
Esc in the middle of dragging a point of a track kept the moved point,
and the hint said so; dragging a straight was taken back but left an
empty step in the history; a vertex or the radius grip of a curve stayed
moved in the design. Now Esc puts back what was there before the drag in
all three, and the history doesn't keep a step for it.
Dragging a standing signal over the track takes it to the other side;
the side used to come from where the signal stood, so it never crossed.
The selected signal gets "To the other side" and "Turn around": the
first mirrors it over the axis facing the same trains, the second turns
it to the trains of the other direction and moves its event to the
other event list of the path. Either one swaps a head leaning to the
track for its counterpart, and an include keeps the template its
directive names, so undo brings the old file back too.
The name of a node or "(no name)" was written out in twenty places and
four local functions, a lower-case copy of a text in four files, the
test for a number, the file name of a template made comparable and the
heading of a direction in three and two, the green main button of a
panel in five and the key=value parameters of a self-test command in
five. Each of them is one helper now: name_of, tall_button_height and
main_button with the panel helpers, numeric with format, normalized
with the include helpers, heading_of with the plan geometry and
selftest_values with the tools; lower gives way to ToLower.
The seventh tool out of editor_mode. It reads the selected set of tracks
and the tab shown through the services, digitizes the tracks it lays and
refreshes the plan after it sets one parallel to another. The panel shown
for two selected tracks is a public call of the tool, and the self-test
command parallel moves with it and lays the same tracks as before.
The fifth and the sixth tool out of editor_mode, the two lineside ones
sharing their file. Placing, moving and taking out the templates which
stand by the track become services of the editor, with the template
types of their own, and so do the tab of the track tools shown, the
ground under a point and the first step done. The context menu, the
click on a fouling point in the view and the lineside tabs go through
the public calls of the tools. The self-test commands hekto and fouling
move with them and log the same as before.
The fourth tool out of editor_mode. The track under the cursor and the
first steps of the tutorial become types of their own, which the editor
gives to the tools, and a tool shown as a tab of the lineside panel keeps
its open and expanded flags in a tool_tab. The trainsets waiting for the
save are handed to the editor by the tool, which hears back when they
were written. The self-test command trainset moves with it.
The third tool out of editor_mode. It reaches the terrain model and the
places of the tracks on it through the services, the place of a track
for the terrain model is a type of its own now, and the laying and the
switches ask the tool for the kink it allows. A self-test command can
ask to be run again in the next frame, as the check against the terrain
model does while the model comes in.
The second tool out of editor_mode. Tools get two more hooks, the overlay
drawn over the view and the options in the tool window, and the editor
gives them the track it focuses on, the node it makes current, the norms
of the route design and the snapshot of the tracks for the undo.
The check gets a self-test command, speedcheck <scope>, which runs it
through and logs the paths found too fast for their geometry.
The first step of taking the tools out of editor_mode: a tool keeps its
own state and reaches the editor through editor_services, the few things
it needs from it, instead of through every member of the editor. The
editor holds its tools in a list for the hooks they share: a deleted
node is forgotten by all of them in one place, and a self-test command
the editor doesn't know goes to each of them.
The gauge moves with its state, its window and its self-test command;
the ImGui ids and the texts stay the same, and the self-test gives the
same hits on the test scenery as before.
The states of the objects which followed a track, kept in the history
for the undo, held the pointer of a model after it was deleted. Only the
address was checked before the model was moved back, so a node made
later at the same address, of another type too, was taken for it. The
states of a deleted model are dropped from the history with its other
pointers.
Found with an address and undefined behaviour sanitizer build, random
monkey sessions on the test sceneries and broken inputs:
- A deleted model left its pointer in the pick list of the renderer, the
bound node of the panels, the bindings of the infrastructure and the
selection: the next pick or panel frame read freed memory. The renderer
forgets it, and one erase_model does the cleaning for all the places
which deleted a model by hand.
- The plan band of a route read the vertex before the first one in the
frame a drag was let go.
- A scenery which can't be opened goes back to the launcher with the
reason in the log, a track of an unknown type or a tributary loads as
a normal track or a river with a message, and a spline with no finite
length or step gets a sane number of segments.
- Typed numbers which aren't (NaN, inf, ends 0 m or 1000 km apart, a
vector of 1e30, a diverging track part of 5 km, a curve threshold of 0,
a zero history size, radius norms below zero) are refused or clamped,
where they made the geometry run away or divide by zero.
- Folders which can't be read and file names which aren't valid in the
locale no longer throw out of the scans of sceneries, textures, sweeps,
roads and signal plates; the scans skip them.
- The launcher: Ctrl+Del with no trainset selected, a dropped vehicle
whose skin is gone and a text with a percent sign.
- A terrain mesh made for another resolution of its chunk isn't put into
the chunk, and a slot is reused only for a mesh of the same size.
- Vehicles on a track changed by the editor are moved over a copy of the
list they leave.
- The table of the keyboard shortcuts gives its stretched column a
weight, else ImGui divides 0 by 0 in the first frame of the window.
With the cursor out of the window ImGui has no place for it, and the ray
under it came out as NaN: the zoom put the camera there for good and the
next look at the ground under the cursor aborted. The wheel is left
alone then, and the ground isn't asked for a point which isn't one. The
self-test gets leave, the cursor taken out of the window.
A touchpad under Wayland sends a scroll as many fractions of a notch.
Shift+wheel took each of them for a step and went round the shapes of
the laid track, the joins and the connections several times in one
swipe; now the fractions are gathered into whole notches and a gesture
moves such a choice one step. Ctrl+wheel steps the radius once a notch.
The 3D zoom measured to the level 0 when nothing was under the cursor,
which in a scenery on the terrain model lies far below or kilometres
ahead, so a light swipe at the horizon flew the camera away. It
measures to the ground under the camera now, backs away by no more than
four heights of the camera over it, and takes at most two notches at a
time. Self-test laystate tells the shape, the radius and the camera.
Besides the steps of 15 degrees, Alt snaps the laid straight to the
ratios of the switches (1:4.8 to 1:26.5) of the straight track the
straight crosses, or of one within 30 m of where it starts; the label at
the cursor says which ratio to which track. The first click with Alt
within 2 m of a straight track puts the start on its axis, so a branch
or a crossing at 1:9 starts exactly on the track.
- In the top view of the tracks work area, the renderer's reach is the half diagonal of the screen. It used to be three extents, which cut wide windows short.
- Cells far from the camera no longer draw only their tracks: the terrain shapes are drawn too. Models keep their own ranges.
- In that view, the heightmap streamer loads chunks as far as the corners, up to 50 km. The detail comes from the size of a pixel, not from the distance.
- The walk over the chunks around the camera is skipped while it would ask for nothing, so a wide reach costs little.
- A setting, kept in the editor settings, leaves out the ballast of the railway in the top view, so the ground under the tracks shows. It is in the View menu and next to the extent slider.
- Self-test: ortho <extent> [noballast|ballast], orthophoto off.
The include bank read every .inc of the scenery directory on the first use, on the main thread: opening the
switch panel or selecting a switch stopped the editor until all of them were read, which on a large scenery
directory under Windows takes long. The bank now starts looking as the editor starts, in the background,
and the main thread only reads the descriptions once the files are read.
- the switch drives, turntables and signals are read again from the bank when it changes; the panels show
"Looking for the templates..." meanwhile, only the edits which need the templates wait for them
- the sweep tool takes the templates from the bank instead of looking through the scenery directory again
- a folder linked into one of its own subfolders no longer leads the walk in circles
- the log tells how many templates were found and how long it took
Labels:
- every button, field, tooltip and message of the editor reread for a beginner: short nouns for the fields with the
sentence in the tooltip, the less used options under More settings, one glossary (field of work, template, track,
grade), sides told from directions, degrees and per mille as signs, messages built from one format string
- plural forms through STR_P; the last entry of a po file is read too, and the Polish plural rule is in the header
- lang/editor_pl.po: the code pass entries merged, 391 entries no code uses and 3 duplicates dropped
- roads: the notes and errors naming a road translated; the build options and the layout fold the texture length,
kerb sizes, traffic share, roundabout part, height over the ground and junction speed limit under More settings, the
lanes start folded
Grade lines fitted to the terrain model (NMT), a line or the whole scenery at once:
- fit_ground: a robust fit on nodes 5 m apart; the ground parting from the line (a bridge, a viaduct, a wall) is gone
past rather than followed, the bends keep off the switches as far as their curves reach, a run of bends the same way
is one point of intersection, a curve with no room is as sharp as the room lets it be
- the ends of the line and the other paths of its switches leading into lines fitted already bound the line by what
the tracks between can climb; ends meeting in the plan, laid apart in height by hand, are joined before the run
- apply_profile: the paths are split where split_path takes the parameter (a straight was cut in the wrong place, into
pieces of a few centimetres the game takes for zero length), no piece shorter than the margin; the paths off the
ends of the route are brought to its height
- Bytom: 1600 lines, grade breaks at the joints 89 -> 20; Tarnowskie Gory: 848 lines, 223 -> 3; no step over 2 cm
With the lay tool on, a scenery with no tracks nor terrain chunks gets the offer of the terrain model and the aerial photos
around the camera; without a place yet it asks for the PUWG 1992 coordinates of this point, as geoportal.gov.pl gives them,
and keeps them as the place of its orthophoto. The offer can be turned off (editor setting terrain_offer). Self-test
nmtoffer.
- editorNmt: squares of 500 m of the NMT at 1 m from the WCS service of geoportal.gov.pl, as GeoTIFF, fetched in the
background, kept in editor/cache/nmt and sampled in the coordinates of the scenery, placed as its orthophoto is
- the terrain panel's Terrain model section: Fit to the tracks moves the model up or down by the median of the
differences to the formation of the tracks (Biała Podlaska, built at 0: -145.73 m, 0.28 m around it); Along the tracks
and Around the camera make the chunks as the model comes in; each path gets its formation and slopes 1:1.5 as a modifier
of the terrain, laid over each other into one corridor, bridges and tunnels keep the model; the orthophoto is turned
on and laid onto the new ground
- the http client of the orthophoto in editorHttp, shared; fill_from_nearest in editormodeshared.h
- after the generator of Hirek (MaszynaTerrainGenerator): the WCS requests, the cache of squares, the corridor by envelopes
- self-tests nmtfit, nmtmake, nmtwait
- a press on the mast of a selected signal grabbed the gizmo, whose up axis runs along the mast, and lifted the signal
instead of moving it along the track; the gizmo gives way over a signal and while one is dragged
- dragged beside its track, off every track, the signal follows the nearest place of the track it stands by instead of
staying put
- a drop away from any track, and a signal in a file the editor doesn't change, say so instead of doing nothing
- a template without a //$e description of its own takes it from editor/templates/<its path in the scenery folder>; the
header scripts write there with --sidecar, leaving the templates alone, so a check of the game files by the store
doesn't take the descriptions away (the descriptions written into the templates on 8.10 and 11.10 were gone, and with
them every signal and drive the editor knew)
- the panel shows the scope and what's found first, then Place and Move for all, then each missing or wrong marker with its
own button and a click flying the camera there; the spacing, tolerances, height, model and turn are under Settings
- a click on a green point (no marker) or a red one (marker standing wrong) in the view puts or moves that marker alone
- the check starts around the camera
- one camera flight, fly_to, instead of four copies of it
- self-test fouling show=1 and place=one
- sleepers3d / sleepers3dplain / sleepers3dbed in eu07.ini: timbers put together from the begin, main and end parts of a model
and stretched to their length, plain sleepers of their own model; tracks whose plain sleepers would touch are laid as one
cluster, lines of timbers led by priority and turned to the bisectors of frogs and crossings at a limited rate, whole timbers
under crossings, split ones between tracks with room to part them, gaps filled per rail and overlaps shortened or dropped;
clusters worked out in a background thread while driving, on demand in the editor
- the ballast can be left out under the beams (sleepers3dbed no)
- blades get their heel and throw from the switch template or blades <heel> <throw> in the scenery; blades of double switches
run on into the track linking them to the next switch
- rail cutting at frogs, wing rails, movable noses and switch crossings done by one carving pass (RailCarve)
- tint of the rail treads applied to the colour only, without the matte band at the frog
- a switch trailed through with a movable nose set the other way derails the vehicle
- self-tests: sleepercheck, sharedzones, beamsnear, throw, sleepersbg