8 Commits

Author	SHA1	Message	Date
maj00r	997a8da41d	fix(rails): the rail going on from the heel of a blade raised as the blade at the heel and forged down to the plain rail along 0.5 m, no step at the heel; the wing rails made over into the low section by a share of their own along them, the rise apart from it; a fastening holding raised rails, as the plate of a frog under the wing rails and the nose, moved up on a pad as far as the least raised of them, its clips with them, a rail not raised sunk in it, a rail raised more on a pad of its own on it; the fastenings selftest lists the lifts and the pads	2026-10-23 22:00:11 +02:00
maj00r	d3aef50257	feat(rails): the wing rails of the frogs of the low section of the blades, as Zu1-60, where the timbers have slide chairs: from 1.5 m before the throat to their ends the foot raised as much as the blades ride, the web shortened, the heads level with the rails beside, forged down to the plain rail along 0.5 m; a wing rail which is the stock rail of a blade too, as in the slips with the blades outside of the diamond, whole along its chairs; the fastening holding only rails raised as much moved up on a pad as wide as it, a raised rail on a fastening with others on a pad of its own	2026-10-23 20:21:13 +02:00
maj00r	b512460fdf	feat(sleepers): the fastenings fitted on the switches crossing and the double ones: the chair of the model split into its brace and its slide plate, the slide plate from the edge of the foot of the stock rail on, not under it; the plates and the slide plates narrowed where the rails lie close, the fastening of two rails centred between them, a rail lying on the fastening of the rail beside it left without one of its own, the brace dropped where the rail beside comes too close; selftest fastencheck	2026-10-23 17:25:02 +02:00
maj00r	5aedbcdc1b	feat(sleepers): the timbers of a switch get the fastenings of the rails from the submodels plate, chair and check of their model: a plate under each rail where it lies on a timber, slide chairs under the stock rails along the blades, a fastening of both where a check rail or another rail of the frog lies close beside, the legs of the nose in one plate where they're joined; the rails sit on the plate, the blades ride on the slide plates of the chairs as high as the model has them, their webs shortened; the fastenings drawn within 120 m; selftest fastenings	2026-10-23 16:46:58 +02:00
Hirek193	9c2520ea52	fix(track): 3D sleepers let go of the beams of the tracks far away	2026-10-21 18:19:21 +02:00
Hirek193	30cb83584d	fix(track): timbermodel of a track lays switch timbers without sleepers3d in eu07.ini	2026-10-21 15:37:11 +02:00
maj00r	d72fa51ce5	refactor(track): the sleeper layout split by concern instead of one TrackSleepers.cpp ... - SleeperRules: the rules beams are laid by and the faults counted where the layout breaks them - SleeperGeometry: plan helpers, beam boxes with their overlap and support tests and a grid of cells, shared by laying, filling gaps, keeping beams apart and checking instead of three copies of each - SleeperPaths: sampled paths, how near they run and whether one carries another; the tracks near a track and the stretches of a path where a test holds, shared by paths_around/unsettle_around and shared_zones/zones_of - SleeperFeatures: frogs and crossings the timbers turn to; SleeperLines: lines of beams, the rails they carry, where they part - SleeperLayout: clusters and their layout, given the epoch instead of reading it; SleeperModels: the models of the beams - SleeperWorker: the layouts kept per epoch and worked out in the background, behind a small interface - TrackSleepers: the facade, laying the instances, the shared zones and the check - sleepercheck reports a digest of all beams; geomhash skips empty chunks instead of crashing The layout is unchanged: geomhash, sleepercheck with the digest, wings, space, guards, crossings and switches give the same output on baltyk, zz_rozjazdy_id4, zz_rf_slips, zz_rf_wide, zz_slips_s42, zz_demo_przechylka and zz_connections.	2026-10-18 00:27:50 +02:00
maj00r	d25f20a56c	feat(track): 3D sleepers and switch timbers, blade heel and throw from templates, one rail carving pass ... - sleepers3d / sleepers3dplain / sleepers3dbed in eu07.ini: timbers put together from the begin, main and end parts of a model and stretched to their length, plain sleepers of their own model; tracks whose plain sleepers would touch are laid as one cluster, lines of timbers led by priority and turned to the bisectors of frogs and crossings at a limited rate, whole timbers under crossings, split ones between tracks with room to part them, gaps filled per rail and overlaps shortened or dropped; clusters worked out in a background thread while driving, on demand in the editor - the ballast can be left out under the beams (sleepers3dbed no) - blades get their heel and throw from the switch template or blades <heel> <throw> in the scenery; blades of double switches run on into the track linking them to the next switch - rail cutting at frogs, wing rails, movable noses and switch crossings done by one carving pass (RailCarve) - tint of the rail treads applied to the colour only, without the matte band at the frog - a switch trailed through with a movable nose set the other way derails the vehicle - self-tests: sleepercheck, sharedzones, beamsnear, throw, sleepersbg	2026-10-17 23:32:43 +02:00