maj00r
5a00d88be9
feat(editor): a scenery begun from nothing is asked for its terrain as the first track is laid
...
With the lay tool on, a scenery with no tracks nor terrain chunks gets the offer of the terrain model and the aerial photos
around the camera; without a place yet it asks for the PUWG 1992 coordinates of this point, as geoportal.gov.pl gives them,
and keeps them as the place of its orthophoto. The offer can be turned off (editor setting terrain_offer). Self-test
nmtoffer.
2026-10-18 13:02:01 +02:00
maj00r
5af699fba4
feat(editor): heightmap terrain from the terrain model of GUGiK, fitted to the tracks of the scenery
...
- editorNmt: squares of 500 m of the NMT at 1 m from the WCS service of geoportal.gov.pl, as GeoTIFF, fetched in the
background, kept in editor/cache/nmt and sampled in the coordinates of the scenery, placed as its orthophoto is
- the terrain panel's Terrain model section: Fit to the tracks moves the model up or down by the median of the
differences to the formation of the tracks (Biała Podlaska, built at 0: -145.73 m, 0.28 m around it); Along the tracks
and Around the camera make the chunks as the model comes in; each path gets its formation and slopes 1:1.5 as a modifier
of the terrain, laid over each other into one corridor, bridges and tunnels keep the model; the orthophoto is turned
on and laid onto the new ground
- the http client of the orthophoto in editorHttp, shared; fill_from_nearest in editormodeshared.h
- after the generator of Hirek (MaszynaTerrainGenerator): the WCS requests, the cache of squares, the corridor by envelopes
- self-tests nmtfit, nmtmake, nmtwait
2026-10-18 12:56:25 +02:00
maj00r
9474293af7
fix(editor): signals move along their track again, and the editor finds the descriptions of the templates beside the game data
...
- a press on the mast of a selected signal grabbed the gizmo, whose up axis runs along the mast, and lifted the signal
instead of moving it along the track; the gizmo gives way over a signal and while one is dragged
- dragged beside its track, off every track, the signal follows the nearest place of the track it stands by instead of
staying put
- a drop away from any track, and a signal in a file the editor doesn't change, say so instead of doing nothing
- a template without a //$e description of its own takes it from editor/templates/<its path in the scenery folder>; the
header scripts write there with --sidecar, leaving the templates alone, so a check of the game files by the store
doesn't take the descriptions away (the descriptions written into the templates on 8.10 and 11.10 were gone, and with
them every signal and drive the editor knew)
2026-10-18 02:08:19 +02:00
maj00r
52a762879c
feat(editor): W17 placed and checked one by one: a list of the switches without one or with one standing wrong, a click on its point in the view puts or moves that one
...
- the panel shows the scope and what's found first, then Place and Move for all, then each missing or wrong marker with its
own button and a click flying the camera there; the spacing, tolerances, height, model and turn are under Settings
- a click on a green point (no marker) or a red one (marker standing wrong) in the view puts or moves that marker alone
- the check starts around the camera
- one camera flight, fly_to, instead of four copies of it
- self-test fouling show=1 and place=one
2026-10-18 02:00:54 +02:00
maj00r
d222c833fc
feat(editor): the tutorial says what the switch tool places now, the connection drag, More for the trainset and the gizmo option shorter
2026-10-18 01:52:33 +02:00
maj00r
d25f20a56c
feat(track): 3D sleepers and switch timbers, blade heel and throw from templates, one rail carving pass
...
- sleepers3d / sleepers3dplain / sleepers3dbed in eu07.ini: timbers put together from the begin, main and end parts of a model
and stretched to their length, plain sleepers of their own model; tracks whose plain sleepers would touch are laid as one
cluster, lines of timbers led by priority and turned to the bisectors of frogs and crossings at a limited rate, whole timbers
under crossings, split ones between tracks with room to part them, gaps filled per rail and overlaps shortened or dropped;
clusters worked out in a background thread while driving, on demand in the editor
- the ballast can be left out under the beams (sleepers3dbed no)
- blades get their heel and throw from the switch template or blades <heel> <throw> in the scenery; blades of double switches
run on into the track linking them to the next switch
- rail cutting at frogs, wing rails, movable noses and switch crossings done by one carving pass (RailCarve)
- tint of the rail treads applied to the colour only, without the matte band at the frog
- a switch trailed through with a movable nose set the other way derails the vehicle
- self-tests: sleepercheck, sharedzones, beamsnear, throw, sleepersbg
2026-10-17 23:32:43 +02:00
maj00r
22dbfb77e6
feat(editor): the tutorial lesson of laying track lists Ctrl+wheel for the radius and Shift+wheel for the shape, the lesson of fixing tells the gizmo can be turned off so the track isn't moved or stretched by chance, and the clips only draw each frame over the last one, so every GIF reader shows them alike
2026-10-17 23:32:43 +02:00
maj00r
2a3d7f2e29
feat(editor): scripted mouse and keys of a self-test are delivered between frames like real input events, so a press seen by ImGui starts a drag as it does by hand; while a script drives the input the real mouse and keyboard are ignored
2026-10-17 23:30:37 +02:00
maj00r
fc3f391e19
feat(editor): Help > Tutorial instead of First steps: seven lessons (looking around, laying track, curves, joining, switches, selecting and fixing, saving and driving), each with a looping clip from lang/editor_tutorial/<lesson>.gif played from the start on a click, the mouse buttons and keys drawn as pictures beside what they do, ticks that fill in when the user does it, a button that turns the right tool on, Back / Next and a dot per lesson that turns green when it is done
2026-10-17 23:30:37 +02:00
maj00r
6d0423b58a
feat(editor): friendlier track editing: the point labels of a path are translated, a selected switch says that the turnout tool sets its geometry and offers Edit the switch (T), the geometry of its paths starts collapsed, the gizmo options show only on the tabs that use the gizmo, cancelling a laying clears its status and the status of a laying counts pieces and metres
2026-10-17 23:30:37 +02:00
maj00r
52a289b15b
feat(editor): switch templates by their geometry and a template editor: the diverging track is a chain of straights, arcs and transition curves from the start of the switch, with the pre-blade stretch and the angle of the blade at its tip; own templates are kept in eu07_switch_templates.txt and listed in the switch tool; double switches Rpd and Rpj are laid as two switches joined by the main track and handled as one set by sliding, replacing, flipping, the gizmo and deleting, with drives for both switches; self-test switchtemplates
2026-10-14 23:17:30 +02:00
maj00r
696168a132
feat(editor): fewer hints in Tracks: the bar in the view is one line with a short mode name and at most three keys, fading when the cursor comes near; the tool options show only the mode name with the full list under (?), the inspector says Nothing selected; the hints name what is dragged instead of its colour or shape, the break is press and drag, the S-curve its four clicks, the turntable and the signal with no type chosen have their own; Esc back to Select only in the full list; the gizmo settings are hidden in Plan; in Polish a track is tor everywhere, odcinek only for a piece being laid, an isolated section and a path of a switch
2026-10-12 02:59:30 +02:00
maj00r
f81698eaf1
feat(editor): the top view zooms out to 50 km for a whole line, from 0.5 m per pixel the rail tracks are drawn as thin lines and the hover reaches 16 px around them, only the tracks near the cursor are checked; handles drag beyond 200 m from the camera in Tracks; Plan works with the mouse alone and without the gizmo: the grips of a straight, the vertices and the radius of a curve drag directly, the break tool is press on the straight and drag, the panel tool stays chosen afterwards, the Q/W/E bar is hidden in Plan; self-test command ortho
2026-10-12 02:49:07 +02:00
maj00r
16c90eb674
feat(editor): Straight and Curve are one Plan tool (G, also C) right after Lay track, a straight opens with its grips, a curve or a line with its vertices; digits no longer type a length while extending from a free end; the scenery wizard chooses realistic or fictional, a realistic one gets //$g and //$o and opens with the orthophoto in the top view, a fictional one only the top view with the grid; the orthophoto settings are kept in the scenery as //$o (on, year, opacity, radius, height, drape, lift, hires, scene, origin) and survive the new formats; self-test command mapstate
2026-10-12 02:21:29 +02:00
maj00r
653d206a54
feat(editor): the vehicle tool places trainsets: what is placed on a named track is written to the scenery on save as trainset <timetable> <track> <offset> <speed>, with reversed when it faces against the track, listed until the save with x to leave one out; the timetable and the starting speed are set in the panel, a tick turns writing off for a vehicle only to drive; the starter WMB10 is only added when nothing was placed; self-test command trainset
2026-10-12 02:00:50 +02:00
maj00r
c9f381a9c9
feat(editor): the parallel track is a tool of its own (N) in the toolbar, its green preview only shows there, Shift+click on a straight in L opens it with that track; the norms are two buttons at the top of the Lay panel and of the Curve tool, shared by both, free hides the recommendations of the curve and its norm warnings, the duplicate transitions checkbox is gone; the Lay panel starts with the radius, the speed and the shape; the Tracks toolbar shows the tools that lay track, the ones that correct a line are under More (remembered); First steps ends with driving the track laid; self-test command tracktab
2026-10-12 01:52:28 +02:00
maj00r
7fea51ad06
feat(editor): norms of laying, free by default: free lays plain arcs with no transition curves and no cant and keeps quiet about the norms, PKP PLK gives the transitions and the cant for the design speed with the warnings, chosen at the top of the Lay panel; digits in Tracks only type values, never change the edit mode; in Lay a track under the cursor says the click starts on the ground beside it, Shift+click chooses it for a parallel track; Alt while laying turns the direction in steps of 15 degrees, with the azimuth by the cursor; K splits only within 20 px of the selected track, where a marker shows it; the environment, overhead line, transition curve, view and include labels translated, one name for laying track in Polish
2026-10-12 01:35:39 +02:00
maj00r
f28640dd44
feat(editor): laying track for a beginner: Ctrl+Z and Backspace during a chain of laid pieces go back to the end of the piece before instead of carrying on from a removed track (Ctrl+Y ends the chain); every warning of the laid shape and of a join is shown by the cursor for 4 s after the click, also when the radius chosen on the wheel didn't reach the cursor and the arc goes through it, the preview of a shape with a warning is orange as it is laid anyway; the switch type stays chosen after a switch is placed; the status says each click lays a piece; a "First steps" window (Help menu, opens with the editor until unticked) with eight steps ticked off as they are done; an empty scenery opens in Tracks with the camera over its origin and a grid where there is no ground under the cursor; F1 lists the laying gestures (Ctrl/Shift+wheel, drag from a free end, typed length); self-test command laychain; Polish translation
2026-10-12 01:21:50 +02:00
maj00r
866f626668
fix(editor): K splits the selected track where the cursor points on screen (as the hover highlight finds it), not at the delayed depth pick which hit the ground beside the rail
2026-10-12 00:44:54 +02:00
maj00r
f1a3bde00f
refactor(editor): one declaration per statement (cpp:S1659) and no chained assignments (cpp:S1121) in the editor files of the branch; single statements under if/else/for that became two got braces
2026-10-11 22:28:35 +02:00
maj00r
12f7fc879f
feat(editor): a switch on a straight slides along it: drag it with the mouse in the Switch or Path mode (snapping to the joints, km shown) or type the distance in its window; the straight paths on both sides get shorter or longer, the ones it runs over are cut, the next switch or the end of the straight stops it; Replace the geometry with the template does the same with the ends of a longer or shorter type instead of leaving the neighbour overlapping it; a straight neighbour following an end that neither moved off its line nor turned keeps its zero control vectors; self-test commands switchslide, switchreplace, pathsnear; Polish translation
2026-10-11 21:33:28 +02:00
maj00r
ddb637a3f5
feat(editor): undo and redo take back the kept alignments and switches together with the paths: each step of the history keeps the //$h and //$r records from before it; a deleted switch or slip forgets its record in the same step, so undoing the deletion brings it back; edits of the switch number, rail and km and forgetting a kept design stay outside the history; self-test commands deleting paths
2026-10-11 21:33:28 +02:00
maj00r
0bfb8a4e7c
feat(editor): switches kept in the scenery as //$r lines: type (Rz, arc Rlj/Rld, slip Rkpd), rail, R, 1:n, side, a, b, R of the main track, the parts of a slip, km and number, catalogue or measured; recorded as they are placed on a straight, in a curve (one-sided when diverging to the side the curve turns to), as a double slip, and when their geometry is replaced or flipped; the switch panel shows the kept type and the R of the diverging track bent with the main one, with the number, rail and km to edit (km from the kept horizontal alignment); the speed check of a diverging track takes its R from the kept type; records follow renamed switches and go with removed ones on save; editor records stay out of the terrain files (.txtf), and those written there by hand go with them into .btf; the side of the diverging track shown as seen; self-test commands for placing switches, the kept switches and the .btf conversion; Polish translation
2026-10-11 21:33:27 +02:00
maj00r
572daeb274
feat(editor): the horizontal alignment designed in the route design kept in the scenery as //$h lines: its vertices and the elements they make (straight, transition, arc, with the radius at the start and the end and the cant), so the paths laid by it are known again without guessing from their curvature; a curve read from the paths takes the radius, the transitions, the cant and the compound arcs of the kept design when its paths lie on it within 2 cm, the other way round too; the whole line design taken back when the fragment has its ends; a curve redesigned alone taken into the line it belongs to; km of the start kept with the design and carried on to the vertical profile of the same paths; paths which no longer follow the kept design shown in the route window, with the kept design to take or to forget; self-test commands for the route design and the kept alignments; Polish translation
2026-10-11 21:33:27 +02:00
maj00r
0f3004a64c
fix(editor): no crash laying track with the mouse outside the window
...
- with no position of the mouse the ray gave NaN and the ground under it was looked up in a grid cell out of range; the lay and drag tools keep the last cursor then, the ground is not asked about points which are not numbers
2026-10-11 21:33:27 +02:00
maj00r
6284f4e0d3
feat(editor): laid track follows the ground between the clicks
...
- the height along the new track is a smooth curve through points on the ground under the foot of the ballast, added where the track would hang or sink more than 0.1 m, at least 10 m apart; the paths are cut there, each joint keeps one grade on both sides
- the clicked ends and the free ends joined keep their height and grade as before; no grade limits
- self-test layclicks: how far the foot of the ballast goes over and under the ground along the paths laid
2026-10-11 21:33:27 +02:00
maj00r
16c1ac4c7b
feat(editor): two free ends joined without loops or forced curves, the shape from a free end on the wheel
...
- the join of two free ends (a drag from one onto the other, or a click of the lay tool on it) tries in turn: a straight when the joints check can't see the kinks (half its angle), one circular arc through both ends (a piece cut out of a curve comes back as it was, its cant kept), a curve with straights where the tangents meet, a reverse curve, and only then a free Bezier curve; a curve turning more than it needs to, sharper than 10 m or longer than three chords is never taken
- the transition curves eased out of a curved neighbour only when there's room for them between the ends, never crossing each other into a loop
- cant and transition curves recommended for the radius the curve really gets, at the speed of the joined track or of the tool and never above what the radius allows; the circular arc keeps at least max(20 m, 0.4 V) between the transitions, the cant lowered to what the shortened transitions can ramp, transitions under 1 m left out
- shapes from a free end: arc then straight, straight then arc, arc through the cursor, straight; Ctrl+wheel steps the radius, Shift+wheel the shape (at a free end: the other joins), the plain wheel still zooms; a click of the lay tool from a free end lays the shape and goes on from its end
- self-test commands join, layto and joints; Polish translation
2026-10-11 21:33:27 +02:00
dab227d16d
Editor: keep the terrain palette rotation/repeat values when the slider is released
2026-10-10 18:19:10 +02:00
7b9eaf1ccb
Editor terrain: area fill with blurred or sharp edge, texture rotation
2026-10-10 17:35:52 +02:00
63302c1ace
Editor terrain: soft stitching to tracks, chunk resolution conversion, water materials
2026-10-10 16:08:12 +02:00
243ce636a7
Editor terrain: level brush with height picker, faster orthophoto fit
2026-10-10 01:27:48 +02:00
8cd0bab27b
Editor terrain: texture browser, undo, conversion from terrain files
...
- Terrain work mode shows a browser of the textures folder in place of the
node bank; textures/materials can be dragged onto the palette entries
(replacing the material), the material field and the water material field
- Ctrl+Z/Ctrl+Y for heightmap terrain changes: a brush stroke or an
operation is one step of the editor history
- Ground conversion reads only the files of the terrain directives
(.txtf with origin/rotate, or .btf without text), paints the chunks with
the materials of the triangles, drops only the shapes of those files
- Fix: ground grids converted out-of-range floats to int, so whole-scene
queries returned the triangles of a single cell (shifted chunks)
- Fix: terrain layers copied from textures already uploaded without their
data stayed grey
- Fix: ImGui ID conflict between terrain tool radios and section headers
- Fix: layers of terrain .txtf files named with the scenery/ prefix and
could not be saved
- Editor selftest commands for the terrain
2026-10-09 23:39:26 +02:00
35bda3778c
Heightmap terrain: .tch chunk packs, streaming with LOD, terrain painting, water and modifiers - terrain/<name>/terrain.yaml + <px>_<pz>.tch packs of 16x16 chunks (250 m, 0.5/1/2/5 m spacing), slices with crc-32 and optional zstd (vendored zstd 1.5.6 in ref/zstd) - heightmap_terrain [name] endheightmap_terrain directive replaces editorterrain - streamer: worker threads, camera + look-ahead loading, geomipmap LOD with skirts, pooled geometry - mat_terrain shader: up to 8 painted layer materials per chunk via texture arrays (opengl33); other renderers fall back to the dominant material - water bodies (outline + level), terrain modifiers (vertical profile shaping kept non-destructive) - F11 Terrain work mode rebuilt: chunks, sculpt, smooth, paint, point spacing, water tools
2026-10-09 21:02:25 +02:00
maj00r
e910615bf6
removed draw limit in track editor
2026-10-09 15:37:23 +02:00
1c28809dd7
Sonar fixes
2026-10-09 14:42:55 +02:00
ff25e71e90
Merge branch 'feat/modern-editor' into feat/mini-generation
2026-10-09 13:13:33 +02:00
3e3317d26f
feat(editor): the toolbar as buttons with icons and names, the chosen tool standing out as the chosen field of work does, the names left out when the row is too narrow for them; the fields of work with icons of their own (surroundings, tracks, roads, terrain) and both rows captioned at their left end (work modes, tools); the tools of the toolbar and of the left edge of the 3d view from one list; Polish translation
2026-10-09 12:49:45 +02:00
645a54a739
feat(editor): icons over the 3d view: the tools of the field of work along its left edge (the edit modes of the surroundings, the track tools, the road tools with the lanes, the terrain tools with the orthophoto), the modes of the gizmo at its top, the axes of the world as the camera sees them in its top right corner, a click on one looking along it, with the top view under them; the icons drawn by editor/icons/editor_icons.py into a png which CMake writes out as an array built into the executable; the gizmo modes and the top view left out of the toolbar; Polish translation
2026-10-09 11:54:47 +02:00
f2e73812d9
feat(editor): View menu with the top view, the lanes of the roads, the structure gauge and a window of the weather and time (time of day, day of the year, visibility, clouds, air temperature, seen in the editor only); the orthophoto settings in a window of their own again; the tracks and roads menus left out, their tools being in the row of the field of work; End drops the models onto the same ground the insert puts them on, the terrain tile models and the terrain patches of the editor included; the loading screen kept in the main window; Polish translation
2026-10-09 11:46:42 +02:00
f94100ffe7
feat(editor): more models selected at once (Shift+LMB), moved and turned by the gizmo together, undone in one step; Ctrl+C / Ctrl+V copy the selected models with their groups and paste them at the cursor; Ctrl+G groups the selection, Ctrl+Shift+G takes a group apart, groups written to the scenery as group ... endgroup and loaded as groups of their own; End drops each model of the selection and of their groups onto the ground; menu of the selection at the cursor on Ctrl+RMB; Edit menu with undo, redo, the clipboard, grouping, deleting; Help > Keyboard shortcuts (F1) with the keys of every field of work, F2-F5 choose the fields of work, the tracks menu lists the track tools with their keys, the keys and descriptions in the menus and tooltips; self-test commands for the selection; Polish translation
2026-10-09 01:12:46 +02:00
791d5d052c
feat(editor): fields of work in a row of their own over the toolbar (surroundings, tracks, roads, terrain), twice as high, with bigger bold text, and the tools of the one chosen in the toolbar under it: the edit modes of the node bank, the track tools in groups with the vehicle and the structure gauge, the road tools with what the place tool puts, the terrain tools (sculpt, smooth, chunks, orthophoto); the tool options window keeps the settings of the tool; the node bank shows a big preview of the entry pointed at for a moment, with its model and skin; the green colours by default again; Polish translation
2026-10-09 00:42:17 +02:00
f184ce7a6a
feat(editor): colours of the editor: amber accents on grey panels as in the design of the layout, the rest of the simulator stays green (colours of the ui chosen by the ui of the mode drawn; Editor Settings > General, kept in eu07_editor.ini), docking preview in the accent colour in both; keys 1-5 choose the edit modes in the order of the toolbar, shown in its tooltips; Mode windows merged into Windows: the windows of the editor, model sets among them, window layout reset and unpinning of the docks; Polish translation
2026-10-09 00:15:14 +02:00
4b451622de
feat(editor): pins of the docks: an unpinned dock hides its windows in a strip at the edge of the main window, a tab of the strip shows its window over the 3d view when pointed at for a moment or clicked, and it goes back when the cursor leaves it or on a click elsewhere, but not while it's in use (button held, popup open, typing, drag); pin in the tab bar of each dock, or Unpin in its window menu where the tabs leave no room; pin in the title of the shown window, or docking it by hand, puts the dock back next to the docks at that edge; Ctrl+Space (also in Mode windows) unpins all docks for the most of the view, or pins them back the way they were; unpinned docks kept in imgui.ini, cleared by Reset window layout; Polish translation
2026-10-08 23:27:17 +02:00
4e69d8f86c
feat(editor): fields of work chosen in the toolbar, one at a time: edit modes, tracks, signals, vehicle, roads, terrain; Toolset split into Tool options (tools of the field of work and the gizmo), Inspector (what it has selected: node with array and bend, path, road) and Node bank (list only); Scene window with the models of the scenery by layer and group, filtered by name or uuid, a click selects, a double click flies the camera to it; track window replaced by a palette of the track tools in groups (build, by the track, checks) with the tools under it, the selected path in the inspector, results of the speed, joints and infrastructure checks in a docked window; road window split into the tools in tool options and the selection in the inspector; terrain tools moved out of the editor settings into tool options together with the orthophoto settings (map menu opens them), leaving the terrain puts sculpting and chunk editing away; default layout: tool options and scene on the left, inspector on the right, node bank and checks at the bottom; Polish translation
2026-10-08 22:41:51 +02:00
maj00r
5d075e75fe
show compass in ortho view
2026-10-08 22:00:19 +02:00
maj00r
95d4581da2
pan ortho view with middle mouse
2026-10-08 22:00:04 +02:00
maj00r
4d7f5f0f0c
move parallel track to lay and selection
2026-10-08 21:56:28 +02:00
60c7250683
feat(editor): docked layout: windows of the editor docked around the 3d view (dockspace over the main window, default layout built when there's none or on Mode windows > Reset window layout), menu shown all the time, toolbar with the edit modes, track and road windows, gizmo operations and the top view, status bar with the outcome of the last operation and the selected node; dockspace submitted also when the frame was started by the ui of another mode, so docked windows don't come undocked on the change of mode; stable ids of the editor windows, no auto resize of the dockable ones; hints of the track and road tools placed in the part of the window the 3d view is seen in; Polish translation
2026-10-08 21:39:31 +02:00
476f3bf1b7
feat(ui): panels can be docked together and dragged out of the simulator window into windows of their own (imgui multi-viewports, ui.viewports yes by default, off where the renderer or the platform can't do it, e.g. wayland); imgui coordinates kept relative to the main window by the glfw backend, so the overlays, picking and gizmo of the editor work unchanged; overlays of the 3d view drawn on the main viewport; keys pressed in the separate windows passed on to the simulator, so the shortcuts of the editor work there too
2026-10-08 21:04:58 +02:00
344034ec70
feat(ui): imgui 1.91.9b-docking in place of 1.73: local changes of the backends carried over (glad as the gl loader, srgb and gamma of the ui, gles glsl string), BufferingBar/Spinner kept, imgui_tables in cmake; cursor position, cursor enter and focus of the main window passed to the glfw backend, which works with events now; code adapted to the api: ImGuiListClipper::Begin, BeginListBox, ImTextureID as an integer, ImageButton with an id, ImGuiKey without GetKeyIndex, logarithmic sliders in place of the removed power argument; ImGuizmo with the math operators defined before imgui.h and SetNextFrameWantCaptureMouse
2026-10-08 20:38:13 +02:00
