Three changes to what goes into a baked heightfield and how it meets the geometry drawn
beside it.
The heightfield held every triangle laid in it, including those it does not replace and
that are therefore drawn as geometry too - so they were drawn twice, and a roof or a
bridge deck left in it bent the ground. Now the first pass lays everything and decides
what is replaced; the second lays the replaced triangles together with the neighbours
that support them - the owners of the corner samples of the cells around them, without
which those cells are not drawn - and only that is written. A first attempt that
repeated passes, dropping whatever bordered a hole, eroded the whole terrain away one
ring per pass: the edge of the ground is always a hole. The replaced triangles stay
replaced in the second pass, since their supports are all there and they have fewer
rivals. The triangles bake no longer keep in memory; they wait in a spill file beside
the heightfield while the scenery parses.
Triangles were refused for an edge longer than 200 m, meant for a water plane under the
whole map. On baltyk and tomaszewo that refused thousands of ordinary fields of a
hand-modelled terrain, and nothing there comes near a whole-map plane. Only triangles
standing on their edge - walls, trees, fences - are refused now. The bake log says why
the triangles not replaced are not: standing on edge, too small, under other surfaces,
next to a hole.
Hand-modelled terrain has triangles hundreds of metres long, elevation-model terrain
small ones along the line, and one grid step either loses the detail or samples a field
every metre. A bake now writes three heightfields a factor of four apart -
<scenario>.ehf, <scenario>.1.ehf, <scenario>.2.ehf - and each triangle goes to the
coarsest one that still puts sixteen samples along its longest edge, and to every
coarser one too, so the coarsest holds all the ground and a triangle at the edge of a
finer field can be replaced by a coarser field beneath it. All of them are picked up
together, and a missing or stale one sends the whole set to be baked again.
Where fields overlap each other or the geometry, the depth test decides: the terrain is
drawn with a polygon offset, negative for the reversed depth buffer and larger for each
coarser field, instead of being lowered by 2 cm - so geometry lying on the ground wins
at any distance and on any slope, and a finer field wins over a coarser one.
On tomaszewo the heightfields went from 176 MB to 10 MB, the load that bakes them from
5:16 to 3:11 and its peak memory from 15.7 GB to 8.5 GB - the scenery alone takes 8.0 -
while the triangles replaced went from 37,130 to 40,402. On baltyk from 19 MB to 2 MB,
with 6,670 triangles replaced against 4,040.
Each resident tile had a height texture and a material texture of its own, uploaded with
glTexImage2D, and was drawn once per material it held with every other material's
fragments discarded, all of them whether in view or not. Thousands of draws a frame.
Now the tiles of a level live in one pair of texture arrays (terrain_tile_pool), a layer
per tile. A pool starts at sixteen layers and doubles when full, copying what it holds on
the gpu, so a level takes only the memory its tiles need; uploads go through a pixel
buffer orphaned for each tile. The ground textures of every material are gathered into
one sRGB array with mipmaps (terrain_ground) - drawn into it layer by layer by a small
shader once the engine has each texture ready, since the scenery's textures are
compressed and cannot be blitted - with a table of placeholder colours and measured
tiling beside it.
Each frame the tiles in range are tested against the frustum by bounding sphere and
gathered per level into a buffer texture of instance data, and each level is drawn in
one instanced call. The fragment shader reads the four samples around it, drops the cell
when any of them carries no ground - exactly the rule the bake already assumed - and
blends the ground textures of their materials by distance, so material boundaries
follow the samples smoothly instead of stepping along triangle edges.
State the copy pass changes is captured and put back, and the texture unit cache is
reset after raw binds, so the rest of the renderer finds things as it left them.
On baltyk: all 30 materials land in the array, 663 of the 1120 tiles in range are drawn
after culling, and a frame is at most six terrain draws. The residency line in the log
now says how many tiles in range were drawn.
Levels changed at fixed distances - 512 m, 1 km, 2 km and on - whatever the window, the
field of view or the zoom. Now a level is used out to the distance where one of its sample
spacings covers terraindetail pixels on screen, 3 by default, which follows from the
viewport height and the vertical field of view with the zoom applied; each level doubles
the spacing, so each doubles the distance. Zooming in or a taller window pushes detail
further, a coarser setting pulls it in. The finest range never drops below four tile
sides, which the morphing needs to close the seams.
Levels and morphing both follow the finest range the last scan used, so they always agree,
and a change of more than a percent - a zoom, a resize - triggers a rescan.
tools/terraincook/seamcheck.py now also tries finest ranges of 5.7 and 11.3 tiles, and
finds no gap in any of them.
terraindetail is in the ini and on a slider in the debug panel; the panel's level table
and the residency line in the log show the resulting ranges. On baltyk the current window
works out to 484 m, so the 512 m minimum applies and nothing changes by default; a
scenery setting terraindetail 1 got 1349 m, and the samples on the gpu went from 3 MB to
10 MB with it.
Today's work on the binary scene format plan (binary-scene-format-plan.md), from the
first measurement to a terrain that bakes itself on first run and streams from a
thread. The step-by-step history is kept on backup/scene-streaming-format-presquash-0916.
Measuring first. -loadprofile times a scenery load by stage and by node kind and reports
node counts and resident memory. On l204 terrain is 95% of the bytes and 99.8% of the
nodes; on quarkmce2007 vehicles, not models, dominate what is left. The terrain turned
out to be a heightfield in all but name, a ribbon covering 12% of its bounding box.
The heightfield. scene/heightfieldformat.h is the .ehf layout: Morton-ordered tiles
of 128 samples with one shared edge sample, a point-sampled mip chain, zstd per tile,
a nodata sentinel, a material palette with a measured tiling per material, and a stamp
of the rules that decided what counted as terrain. scene/heightfieldreader.h reads it
for the tool, the renderer and the loader alike, and scene/terraincooker.h writes it,
shared by the terraincook tool and the engine so a first-run bake is the file the tool
would have made. The cooker rasterises every triangle where it is drawn (through
scene::place_in_world, the placement the region applies too), keeps an upper surface
laid within half a metre over another and the lower of two further apart, and then
asks each triangle whether the heightfield shows it: laid, reaching a sample, keeping
nearly all it claimed, and with the ground around it drawn at every level out to 2 km.
Baking on first run. simulation/terrainbake bakes <scenario>.ehf the first time a
scenery is opened, choosing the grid step from the first 200,000 vertices, and on later
loads leaves out the triangles its node table says the heightfield shows. Everything
else - trees, grass tufts, gantries, bridge decks - is drawn as written, so a bad bake
can at worst draw something twice, and the heightfield sits 2 cm under the triangles so
the original wins there. Nodes are keyed by file, line, include parameters and
placement; an edited file changes its keys and those nodes are drawn again. A bake under
older rules, or without its table, is thrown away and redone. A launcher copy named
$scenario shares the scenario's files. -nobaketerrain shows the triangles as written.
A scenery can still name hand-cooked fields, several at different steps.
Drawing and streaming. rendering/terrainclipmap draws resident tiles at the mip level
their distance earns, deriving the grid from gl_VertexID and texturing in world space
with the scenery's own materials. rendering/terraintileloader reads and decodes tiles on
a thread of its own; the renderer rescans what is in range only after moving a quarter
of a tile, asks for what is missing nearest first, uploads at most 32 tiles a frame,
drops arrivals the camera has moved past, and keeps drawing a tile at the level it has
until the right one arrives. The terrain has its own range, terrainrange in the ini and
a slider in the debug panel, 20 km by default and independent of basedrawrange; the far
plane of an ordinary view is pushed out to it. The debug panel shows the range, tiles in
view, on the gpu, wanted and queued, and how many sit at each level.
Events. The event queue moved out of the events into a binary heap with a deterministic
tie-break, and an event is handed its activator instead of storing it, so basic_event
is a definition and nothing else.
The logic container. scene/logicformat.h and scene/logiccontainer write a scenery's
events, their targets and sibling chains as flat, deterministic arrays with a schema
hash that refuses a mismatched build. simulation/logiccook cooks it from the loaded
state whenever it is missing, stale or unreadable, reads it straight back to check it,
and resolves each target to a position in the registry its event kind searches.
-cooklogic forces a cook, -verifylogic only checks. Nothing reads it at load yet.
Prefabs. scene/prefab describes a signal by the aspects it can show - lights, speeds,
animation channels, a sound - instead of pasting an .inc per variant, and expands an
instance to ordinary scenery text. Tried on a light signal and a shape signal.
Screenshots without a person present: -shot x,y,z[,yaw[,pitch]], -shotsettle, -shotstay.
The editor branch was written against headers and the PCH, both of which this
branch has done away with, so its own files were ported rather than merged: the
five headers it added are now interface units and their .cpp files module
implementation units.
- editor/{puwg1992,polandmap,turnouts,orthophoto} become eu07.editor.* modules,
application/planpanel becomes eu07.application.planpanel. The plan tool keeps
to its own module rather than joining the eu07.simcore partitions: it stands on
the editor's libraries and eu07.application.uilayer, not on the simulation core,
so :editoruilayer can export import it without a cycle.
- glm arrives by import eu07.glm, never by include, as the rest of the tree does.
maj0sted is header-only and glm-free, so its headers stay includes in the global
module fragment - every unit that names those types includes them itself, since
a global fragment is not visible across units.
- the one textual conflict was :editoruilayer's include block against this
branch's imports; resolved this branch's way plus the planpanel import.
Builds with clang 22 (-DWITH_BETTER_RENDERER=OFF) and starts into the editor on
empty ground with -editor alone.
AnimModel.cpp reaches cParser through the simulation core, not a direct
import, so the previous pass missed it; the propagation now follows the
whole import closure. Train.cpp, drivermode.cpp and Globals.cpp call
Console:: inside _WIN32 guards without importing eu07.console - invisible
on Linux, where those blocks are skipped.
A template defined in a module interface is instantiated in the importing
unit, where its body's types must be complete. A declaration reaching the
importer only through the interface's global module fragment is not
enough for MSVC: cParser::operator>> uses std::stringstream, and every
unit that parsed a float got an incomplete type.
526 headers across 161 units, derived from what each interface's template
bodies actually name.
Its sources reached the standard library through the project headers they
included; those are imports now. 178 headers across 56 files, plus 18 C
library headers elsewhere for memcpy/printf and friends. MSVC's STL does
not supply these transitively the way libstdc++ does.
Every module unit now includes the standard headers it uses. Declarations
reaching a unit only through an imported module's global module fragment
are reachable but not visible, so ADL misses the free operators older
libstdc++ declares beside a type - reproduced on ubuntu 24.04 (libstdc++
13), where gl/vao.cpp could not compare vector iterators.
Also drops a stale editor/editorSettings.hpp from the MSVC source list,
which broke the Windows configure step, silences the deliberate
include-in-purview warning in the glm wrapper, and removes GCC support:
clang or MSVC only.
Opening the Plan tool now switches the whole colour pass to an orthographic
projection and pins the camera looking straight down, so the plan is drawn
against the loaded scenery rather than in a window of its own. Closing the
tool hands the camera's orientation back; leaving the editor clears the view
outright. The wheel changes how much ground fits on screen instead of moving
the camera, which with no perspective would change nothing but the clipping.
Both configured backends follow: the experimental renderer swaps the pass
projection (and fits its shadow cascades to it), the modern GL renderer uses
its existing ortho helpers. Everything reading the pass projection - the
mouse ray, the frustum test - picks the change up on its own.
The experimental renderer also publishes its colour pass camera now, which
it previously left at the interface defaults, so overlays can place world
points on screen.
With tonemapping, clouds need to stand out above 1.0 to reach proper
white levels.
Note that this should get disabled if tonemapping isn't used, in case
it's made properly configurable in the future.
