maj00r
6bd3d4d19f
feat(editor): laying from the photo in two modes, Tab switching them in one row of points: the points clicked as bends of straights, eased with two transition curves meeting with no cant, of 3000 to 6000 m set in the panel, or with an arc of the norms where they don't fit; or the points along the middle of a curve seen on the photo, the last two on the straight after it, a curve, compound or two with a straight between them, fitted to them with its radii and its transitions. The points clicked are kept where they are, a curve below the norms laid with its warnings in the colour of one; the line shown as the points are clicked, laid by Enter in one step of the undo and going on from its end, Backspace taking the last point back, Esc dropping the points not laid. A bend after a free end or a curve traced goes along its straight, dashed; the curves labelled with their radii, transitions, cant and speed, the straights with their lengths, the points traced in the colour of how far the line is from them, the curves of the line listed in the panel. The Plan sets two transition curves with no arc for a vertex. Selftests laymode, layradius, laytrace, layp, layreport, layenter, layback, laycancel, laysample
2026-10-24 21:12:27 +02:00
maj00r
500f068297
feat(editor): the curves of the laying from the photo in the design of the lines: a vertex of two transition curves meeting at its radius, with no arc and no cant, kept in the scenery files; the bends of straights eased with them at a radius from 6000 down to 3000 m, or larger where they'd be too short for the speed, else with an arc of the norms as large as fits, the straights between two bends shared, the bends staying where they were clicked and a curve below the norms kept with its warnings; a stretch traced on the photo fitted with a straight, a curve with its radius and the length of its transitions, a compound one, or two curves with a straight between them, on a thread of its own while the cursor moves; the heights from point to point through all the points clicked. Unit tests of the design of the lines
2026-10-24 20:57:59 +02:00
maj00r
9855de74b4
feat(editor): the tracks are laid to the PKP PLK norms only: the choice of the free laying is gone, its cards in the panels of the laying and of the plan, the question as the laying starts and the setting; the transition curves and the cant of the norms always, the speed of the laying with its chips, the radius below the minimum for the speed a warning. The settings keep the radii the bends of the straights will be eased with instead
2026-10-24 20:05:04 +02:00
maj00r
5ae9932ce7
fix(editor): the tracks being built drawn over a dark edge, the points clicked while laying and the line between them too: the white straights of the track laid no longer melt into the light base map of the top view zoomed out
2026-10-24 19:25:30 +02:00
maj00r
69980b5540
perf(editor): the top view draws the terrain lighter: the cells of its grid some 16 pixels across, not 10, the chunks streamed only as far as the screen reaches, not the range of the 3D view, and the cube map of the reflections not made anew while it's shown, nothing in it reflecting
...
On test2 at an extent of 300 m: 55 chunks in place of 106, 204 thousand triangles of the terrain in place of 895 thousand (all drawn 0.82 million in place of 2.34), the GPU 1.46 ms a frame in place of 2.33, and 3.6 ms of the CPU less a frame for the reflections. The 3D view stays as it was; the range of 50 km of the tracks work area in 3D cost nothing measurable on l053. Selftest perf logs the chunks of the terrain, their triangles and the steps of their grids.
2026-10-24 19:23:01 +02:00
maj00r
dcaf48d7b6
feat(editor): the editor knows which tracks have their grade line fitted: a grade line applied, fitted to the terrain model or with the profile, marks its tracks with the shape they have, kept in the scenery files as //$f lines; a track changed since, by hand, by K or taken back, isn't fitted any more. The terrain of the tracks in the panel of the tracks tells how many of the selected ones are fitted, and puts onto the terrain all the tracks or only the ones not fitted, these meeting the fitted ones as they are, the scenery not moved
...
Selftests: nmtauto [unfitted], fittedstate [reload].
2026-10-24 19:14:08 +02:00
maj00r
59c3458173
feat(editor): the terrain model in the field of work of the terrain only loads and keeps the model: its place, Load along the tracks or around the camera, the band, the offset of the heights, the progress and the faults, with no choice of what gives way; the tracks and the terrain are fitted to each other in the panel of the tracks. In a scenery with its terrain made from the model the terrain grows around the camera too, not only ahead of the laying; the chunks the growing gave up are not asked for again
...
The terrain follows the edits of the tracks with a formation only: a track with none is not shaped on its own any more, nor after the chunks made around it, and the formations are laid after a load only when the tracks are put onto the terrain or the terrain under them.
2026-10-24 19:02:29 +02:00
maj00r
7d0caee541
feat(editor): the terrain of the tracks in the panel of the tracks: Draw the terrain to the track, of the selected tracks or of their whole run, Restore the terrain, each one step of the history, the terrain following the tracks edited or not, and Tracks onto the terrain and Terrain under the tracks for all the tracks of the scenery
...
The formation of a track as it is already was taken out of the terrain when the track was shaped again, as after a change of its properties alone: the formations the tracks still have are no longer counted as gone. Selftest trackterrain pull|restore <tracks>.
2026-10-24 18:53:32 +02:00
maj00r
11d1342181
feat(editor): an end of a track dragged, and an end of a straight dragged by its handle, goes onto the ground at the height of the ballast, as a point laid; with Shift held it keeps its height
...
Selftest trackends: the ends of a track against the ground under them.
2026-10-24 18:45:47 +02:00
maj00r
9625b4b3d9
feat(editor): K on a track is a break of the grade, as a point of a road: the track split at the cursor, the point between the two at the height of the ground and the ballast there, each of them an even grade from its other end up to it
...
Selftest kbreak: K on the track nearest a point, logs the joint against the ground.
2026-10-24 18:41:25 +02:00
maj00r
641619e13f
feat(editor): the point of a track laid where there's no terrain yet, as over the base map of the top view, takes the height of the terrain model with the offset of the scenery and the ballast, the model under the cursor asked for while laying; the fitted heights of the laying called a smoothed grade line in Polish
2026-10-24 18:37:44 +02:00
maj00r
2ae10f5901
feat(editor): the chunks waiting for the terrain model and the tiles of the orthophoto asked for and not shown yet outlined on the ground where they will be, pulsing, blue and orange, named where the name fits: at the heights of the terrain beside them or of the model, else level with the nearest chunk or track
2026-10-24 18:31:24 +02:00
maj00r
336c940c28
fix(editor): laying leaves the terrain as it is: the track takes from the ground only the heights of the points clicked, from point to point by default, and no formation is led into the terrain after it, nor after a track dragged from a free end; the terrain made from the model never makes a chunk there is anew, made from the model or by hand, edited or not, only the missing ones, the formations laid anew as the tracks lie
...
The terrain under the tracks and the end of Tracks onto the terrain took every chunk along the tracks away and made it again from the model, the changes made by hand with them (79 chunks on test2). The heights while laying are kept under a key of their own, so the fitted ones chosen when they were the default are left behind; fitted stays a choice.
2026-10-24 18:20:22 +02:00
maj00r
da336b9530
fix(editor): the orthophoto which comes before the terrain under it lies where the terrain will be, at the heights of the terrain model with the offset of the scenery, or level with the tiles beside along its edges, not flat at the height of the layer far below; the squares of the model asked for, and the tile laid onto the terrain or the model once either comes
...
mapstate logs how many tiles lie on the ground and how many at guessed heights.
2026-10-24 18:13:15 +02:00
maj00r
e322947300
fix(editor): the track shown while it's laid over the ground no longer holds up the frames: its grade line is fitted on a thread of its own, the line fitted a moment ago stretched over the track meanwhile, and the click takes the line fitted for the same ground instead of fitting it again; the terrain follows the tracks once the laying ends, not after each click of a chain
...
Fitting the grade line took 3 ms for 250 m of track, 30 ms for 1 km, 65 ms for 2 km and 200 ms for 4 km, and the preview of the lay tool and of the drag from a free end fitted it every frame, twice for the drag; on the terrain model the preview of some 800 m took 10 to 17 ms a frame, the cursor standing or not. Now the frame waits under 1.5 ms for 4 km. The formations of the tracks led into the terrain went through every chunk under them 0.3 s after each click, some 50 ms, while the cursor went on to the next point; they wait for the laying to end. The tracks laid and the terrain are the same as before.
Selftests: perf logs the longest frame and those over 33 ms, fittime the time of the fit by length, terrainhash a hash of the chunks in memory.
2026-10-24 18:00:21 +02:00
maj00r
e35487f767
fix(editor): the map of the scenery wizard north up from its first image: the thread loading it keeps the north edge in the first row, not flipped or not as the texture loader left stb by then
2026-10-24 17:25:26 +02:00
maj00r
36904c2815
feat(editor): buttons in the switch tool setting a model of timbers on all the switches and crossings of the scenery at once, one for each model of timbers of the scenery data and one for the model of eu07.ini, in one step of the undo; the selftest switchtimbers does the same
...
(cherry picked from commit 81a6b855d0
2026-10-24 16:33:41 +02:00
a83d5c6978
feat(editor): presets of the track properties, applied on the selected tracks
...
(cherry picked from commit 83c8c23c80
2026-10-24 16:33:24 +02:00
7e284b293d
feat(editor): texture of the rails of path 2 of a switch set apart
...
(cherry picked from commit 16c77ab6fb
2026-10-24 16:32:35 +02:00
maj00r
4d2f95aa43
feat(editor): the tracks laid on the terrain model go onto it as the tracks going onto the terrain do, the chain laid since the laying began fitted again at each click, with the tracks around kept and met; a straight or an arc cut by the fit before made one again, a path cut only where it would part from the line by more than 3 cm; a choice of the heights while laying: fitted, from point to point, level, kept in the settings; the fit taken back with its click
2026-10-23 15:55:58 +02:00
maj00r
7c0b3bc858
feat(editor): all the labels of the tracks in the top view, the straights with their lengths too; one which would cover another or the tracks moved out to the nearest free room, a line leading back to its track
2026-10-23 15:22:17 +02:00
maj00r
5e846018b6
feat(editor): far out the top view shows the base map of OpenStreetMap from geoportal.gov.pl in place of the imagery, tiles as large as the view needs, the ground not drawn under it nor streamed as far as the view; the tracks over it in the colour of the rails, blue by default, and the joints of the pieces left out far out
2026-10-23 13:35:07 +02:00
maj00r
a892532fda
feat(editor): the top view draws the tracks whole, without the ballast or the rails alone, in a colour of their own over the imagery and the map: both rails close up, one line further out; a choice by the extent and in the View menu, kept in the settings
2026-10-23 13:20:06 +02:00
maj00r
fe3dd758ea
feat(editor): the signalling, the hectometre posts and the terrain go to layers of their own: <scenery>_srk.scm, _hektometry.scm, _teren.scm, made by the first of them and included by the scenario file, the active layer left as it is; the station descriptions of the signalling there too
2026-10-23 13:07:14 +02:00
maj00r
d14b4534ee
feat(editor): the station schematic generalized: each station track on a row of its own, the stretches between the switches shortened, the connections slanted between the rows, the signals and the useful lengths on the drawn tracks
2026-10-23 12:51:58 +02:00
maj00r
eab3dca700
feat(editor): the Signals tool goes into the signalling one: its templates under Signals in the SRK panel, the ones the station's signals are placed with too; a click on a tile or Place by a track arms placing, Esc or a click on the armed tile stops it, a click on a track else opening its station; a signal picked in 3D or in Signal heads shows its card at the top of the panel, its template, to the other side, turn around; H no longer a tool
2026-10-23 12:26:07 +02:00
maj00r
2d9be3ae10
feat(editor): a deleted track leaves its signal reads and its track circuit to the track laid in its place, and the SRK check lists the signals no track reads and the broken lines, with a Repair
...
A deleted track whose read events or track circuit no other track took says so by the cursor, naming the signals and the circuits, and the editor keeps them for the track laid in its place, within a metre of its axis. The read of each signal goes to the piece by the signal, on the list its facing there gives, so a track laid the other way round keeps the trains reading it; the other events go to the piece at its middle, the circuit to a track lying there for the most part, a new track taking it instead of the one of the track it was made from. It happens in the step which lays the track, so Ctrl+Z takes it back and laying it again gets them again; a track which took a circuit over and is removed by another step leaves it to that step, and the events of a signal taken away stay off the tracks.
The SRK panel of a station lists what it and its lines need: signals no track reads, lines broken off where the tracks go on beyond a gap, tracks of a line of the automatic block in no block section, block sections whose tracks are gone. A row shows the place; Repair has the track by each signal read it again, as moving it does, and sets the line signals again where tracks are in no block section. A warning after an operation shows by the cursor in amber, a refusal in red as before. srkcheck counts these too, srkfix repairs, join takes the height of the ends for sceneries far above zero.
2026-10-22 22:40:01 +02:00
maj00r
de61cf05db
test(editor): the orthophoto selftest takes the height of the layer, for sceneries far above zero
2026-10-22 21:53:41 +02:00
maj00r
c024d7c262
feat(editor): the signals and the signs by a track go with it as the Plan lays it anew, square to the line, not along it
...
A curve laid anew, its radius changed or made compound, or a straight moved: the paths of the chain are cut again where their joints stood, set square onto the new line, each keeping its stretch of the ground, so their events, their track circuits and the cuts of the block sections stay where they were instead of being handed on along the line; the parts between the switches alike, the old even sharing kept where the joints don't follow one another along the new line.
The objects by a track taken for a change go with it by themselves: the signals and the warning discs it or its run reads, the SHP resonators by their events, and the controls of the block sections, the hectometre posts, the W17 markers and the other signs by the track nearest to them, within 12 m. They move square to the new axis keeping their offset and their turn, an object moved by hand meanwhile staying where it was put. Such a binding isn't kept in the scenery nor shown among the bound objects of the infra tool, which can still bind the object for good, and the undo and the redo take the objects back and forth with the tracks. The status of the Plan tells how many objects moved with the tracks. A path taking an object over the other way round keeps it on its side, turned as it was.
2026-10-22 21:32:34 +02:00
maj00r
4c55951d8a
feat(editor): the automatic block both ways or mixed, and the lines out on the schematic
...
A block boundary of a line both ways has, on each track, the block signal of its trains 15 m before the joint and the one of the wrong-track trains 15 m beyond it, named after its twin with N, both on the outside of the line, the templates leaning the other way picked for the N ones, as on the lines of PKP PLK. The mixed block keeps the automatic block for the trains of the track and the semi-automatic one for the wrong-track ones: no N signals, a warning disc the braking distance before the entry signal of the wrong-track trains. A choice under the table of the lines sets either for the double-track lines of the station, kept in the record of the station, and by itself a line takes the mixed block where a warning disc stands for its wrong-track trains and no N signal does. Set the line signals places the N signals or the warning disc and takes the other away, a block boundary drawn places the N signals of a line both ways, and sbl_odstep.inc switches both block signals of a section with its 7th parameter. The name shown at the mouse while drawing takes the letter the block signal will get where its number stands already.
The station schematic shows the lines out to the next stations straightened: their block sections in the colours of their names with their lengths, the joints, the block signals and the warning discs with their km on the outside of the line, the axis in km; Lines fits them in, a section under the mouse tells its name, length and km, and a click on it flies there in the 3d view.
2026-10-22 20:47:52 +02:00
maj00r
d090e93c81
fix(editor): a block boundary drawn places its signal across only where the other track runs near, the hover and the click count the block signals facing the trains alike, an SHP resonator at a joint finds the piece of a track cut for another one, and a batch of signals missing its template changes nothing but the tracks cut, Ctrl+Z taking them back; the km of each line kept for the hover, the shorter block section named in its warning, the block column wider
2026-10-22 19:51:55 +02:00
maj00r
c7fecc011e
test(editor): selftests draw the block boundaries, srkboundary clicking at a block signal standing, and check the block sections of the scenery; the monkey opens the SRK tool too
2026-10-22 19:33:57 +02:00
maj00r
a3e1624caf
feat(editor): the lines out of a station take the automatic block of 3 or 4 aspects, the block sections no shorter than the braking distance or than half of it, the block signals placed with the templates of the aspects and those standing swapped for them; block boundaries drawn by hand, a click on a track of a line of the automatic block placing block signals across both tracks there, numbered after the hectometre, the tracks cut beyond them and the block sections named and switched anew, a click on one standing taking its signals and the switching of their sections away, a step of undo each, the lengths of the sections either side shown at the mouse. A line whose block signals stand keeps them as they stand, Set the line signals placing them evenly only on a line without any, and one whose block signals no block section of the editor switches keeps the block of the scenery untouched; the signals of the other block left along a line taken away, but where it shares its track with a line of that block, and the switching of the sections gone from the lines set with them. A block signal of 4 aspects is checked for a section no shorter than half the braking distance, and fitted with templates of its aspects only
2026-10-22 19:26:26 +02:00
maj00r
b92d1283ac
feat(editor): a block signal template knows its aspects, 4 where its events give S3, the green light flashing with the next signal at S5, else 3; one step of the signalling takes includes away too, the signals among them with their read events, Ctrl+Z bringing them back with the rest of it
2026-10-22 19:26:25 +02:00
maj00r
fc0b9b46e8
feat(editor): the table of the lines out of a station marks the signals of the other block left standing along a line, warning discs on one of the automatic block, block signals on one of the semi-automatic one, a click flying to the first of them
2026-10-22 19:06:52 +02:00
maj00r
9ea3628661
refactor(editor): the SRK tool judges the SHP resonator of a signal in one place, missing, beyond the tracks, off its place or placed, and picks the place of a resonator, a joint or a cut, apart from placing it; the nearest point of a track to a signal found coarsely and narrowed down rather than by up to 4000 points. A resonator whose event would land away from its place, the track not cut there, is left out with a note, and the status after a failed placing tells Ctrl+Z takes the cuts back; the lines out of a station emptied while the signal templates are looked for, the layout of the station read only once it's known open
2026-10-22 19:06:49 +02:00
maj00r
fc6d1158bd
feat(editor): the SRK tool shows the block of each line out of the station and places the SHP resonators: the automatic or the semi-automatic block chosen in a table of the lines, by hand or by the block signals standing along it, a double-track line taking the automatic one, a single-track one the other, kept in the record of the station; the block signals placed only on the lines of the automatic block, the warning discs only on those of the semi-automatic one. The heads checked for their resonators 200 m before an entry signal, a block signal and a warning disc and at an exit signal telling of the next one, 5 m either way, those of the old sceneries found by any event ending with _shp within 100 m; the ones missing placed as rezonator.inc with their events on the tracks the trains run into, at a joint within 5 m, else the track cut, in one step of undo. A signal stands by the track of its read event only when it lies near it, else by the nearest track, so a read event put on a track before the signal no longer shifts its routes
2026-10-22 18:55:21 +02:00
maj00r
edb4f7c60d
feat(editor): the panel of a signal picked swaps its template for another of its kind and mount, the name, the plate, the place and the read event kept, a head leaning to one side for its counterpart leaning towards the track; one step of undo, the selftest signalswap
2026-10-22 18:55:13 +02:00
maj00r
9c124b23bb
refactor(editor): a signal head tells the next one shows stop by its chambers alone, an orange light above the red one, not by the events of its template reading the next signal, which the templates of the old sceneries lack
2026-10-22 18:54:54 +02:00
maj00r
a811486b53
fix(editor): the pin of the signal under the mouse in the list of the signal heads stands over its name, clear of its lamps; the routes name the switches they turn off the straight at, a plural for several, and the Polish of the tooltip reads plainer
2026-10-22 17:55:05 +02:00
maj00r
cbbf373aab
fix(editor): the templates of the signals swapped or placed without a track changed are a step of the history of their own: they went into the step before, the block signals set say, undone with it, and the SRK tool, missing a new step, kept showing the lights as they were
2026-10-22 17:55:05 +02:00
maj00r
92552b49cd
feat(editor): the SRK tool checks the lights of the signals against the routes of their trains: the speed of each route through the switches by the radius of their curves and the speed set on them, 40, 60 or 100 km/h, a lower orange light for these with an orange strip for 60 and a green one for 100 as Ie-1 gives them, an upper orange one where the next signal can show stop, the white one of the substitute signal; a signal telling of the next one nearer than the braking distance slows the trains with it at stop, Ie-4 § 8 ust. 5, a W21 for 140. The templates read for the speeds their events show; the signals set get the template of the kind with these lights and the least beyond them, the standing ones fitted so in one step of undo, the template swapped with the name, the plate and the read event kept, a variant leaning the other way only with the same speeds. The braking distance shown with the speed of the main tracks it follows, set by hand in the record of the station and used for the block sections too; the warning discs and the block sections nearer than it marked, the signals that don't fit marked in the schematic and the scenery
2026-10-22 16:07:04 +02:00
maj00r
ad0a7e7d62
fix(editor): the records of the stations, the switches, the alignments and the kilometrage stay out of a _ter.scm too, as out of a .txtf: with the .sbt of the scenery the file loads as terrain, isn't written back and the changes kept there were lost
2026-10-22 16:06:37 +02:00
maj00r
2452c1cd0d
fix(editor): the tools see each change of the history by a revision of it, not by its size, which stood still once the oldest steps were dropped at the limit of 200 and came back to the same after an undo and another change: the SRK schematic, the lineside lists, the gauge, the joints, the speeds and the parallel track missed them
2026-10-22 16:06:25 +02:00
maj00r
43346b61e7
feat(editor): the SRK tool measures the station tracks: the construction length and the useful one each way, as the rozporządzenie on the railway structures (Dz.U. 2026 poz. 1225) § 2 defines it, from the signal the trains stop by back to the joint, the fouling point or the level crossing behind them, between those where no signal stands; the switches within a track part it into stretches. A list in the panel with the longest train, the two ways marked where they differ, the track under the mouse or selected drawn in the schematic and the scenery, the list copied as a table
2026-10-22 15:24:02 +02:00
maj00r
1f8a477ec4
fix(editor): the exit signals of a station track stand at the ends of its longest circuit, for the longest useful length both ways as Ie-4 § 13 ust. 8 wants, not at the outer ends of the outermost long circuits, which left the trains of one way a short stretch beyond a switch within the track
2026-10-22 15:24:02 +02:00
maj00r
a217c9ba75
fix(editor): the hectometre posts write the km at the point on a line of its own under the kilometrage of the line, the wrapped text broke the number at its comma
2026-10-22 14:42:42 +02:00
maj00r
192dfd2035
feat(editor): the signalling mode takes the km of the station and of the block signals from the kilometrage of the line where the Kilometrage tool sets it, jumps included, the way the km rise from its axis, the line of each line out at a junction too, the station of a line set there without typing its number
2026-10-22 14:33:18 +02:00
maj00r
435b80eb55
feat(editor): the hectometre posts go by the kilometrage of the line where the Kilometrage tool sets it, its jumps too, a post at a jump of the km on from it or of the km it is reached at, the km given at the point still there as a choice; the posts standing go with the place of their number nearest to them
2026-10-22 14:33:18 +02:00
maj00r
7cc8e5bb9a
feat(editor): the kilometrage tool leads a line through a station along the tracks chosen, the straight paths of the switches by default, from the track chosen on along them until the line meets its tracks again or on and away at a junction, kept as //$k via lines; a track beside that comes back onto the line between the stretches it runs beside it or both ways is a track of a station, not the other track of a double-track line
2026-10-22 14:16:42 +02:00
