Checkpoint of the editor branch so work isn't carried loose across a branch
switch. Builds.
- maj0sted turnout geometry moved into the domain: domain::lay_turnout lays the
diverging path (pre-blade lead, blade at beta, arc of alfa-beta, frog rail) and
solve_junction is a thin adapter onto it.
- the maj0sted web/ tree renamed to editor/ (namespace and paths) - there is no
WASM here, it's plain native C++ the editor calls.
- click places the switch at its start (początek rozjazdu); the branch's leaving
straight is locked tangent to the frog; switches can be slid along the through
track and flipped L/P.
- Polish turnout templates carry catalogue length (Id-1-consistent lengths), plus
blade-angle and pre-blade fields (left 0 until the catalogue figures are in).
- TURNOUT_SPEC.md: the Bezier-based runtime/model contract.
- also folds in other pending branch changes (scenery, tests) to leave a clean tree.
A switch (rozjazd) is a relation on a through niweleta, not a niweleta - the
through track is never split. It marks the theoretical point on the through
centreline; two tangent lines cross there (the through heading and that heading
turned by the crossing mark 1:n), and the internal diverging curve is fitted to
round the corner between them, reusing the same GapFitter the gap fits go
through. So the curve is free: a plain arc, or a łuk koszowy right inside the
switch. The theoretical tangent lengths and the curve length follow from it and
are read off, not set.
The branch niweleta's leaving straight is now locked to the frog: it starts at
the frog and runs along the frog heading every solve, only its length is the
user's. That enforces tangency no matter what is drawn, and because the first
straight is pinned tangent, any fit in the branch's first gap - including a
basket - meets the switch tangentially by construction.
solve_layout solves the niwelety and the switches together in two passes: solve,
read each frog, pin the branches, solve again. Switches serialize as an ejuncs /
ejunc section; older files without it still load.
Typical Polish turnouts (rozjazdy zwyczajne) are offered as templates that set
the crossing mark and radius together; the length each spans is computed from
them (arc = R*atan(1/n)) and shown, so how long the switch is is known.
The flip was my mistake. Measured against the service instead of guessed:
fetching a box and its northern half shows the half matching the top of the
whole, so the images arrive with their first row at the north edge and the
default texture coordinates were right all along. Both the base map and the
orthophoto go back to them.
Imagery of a given piece of ground does not change, so a fetched tile is now
kept under editor/cache/orto and the next session starts from it. Until now
the cache lived only in memory, which meant going back to a slow and flaky
service for ground that had already been fetched once.
Gaps can be fitted with a basket curve as well: the library's compound mode,
with clothoids at both ends and a chain of arcs between them. Arcs can be
added and removed; the closing one takes whatever deflection the earlier
ones leave, so its length is not offered for editing.
The Geoportal images arrive with their first row at the north edge, which is
the opposite of what the default texture coordinates assume - the vertical
ones are now swapped, for the picker's base map and the orthophoto alike.
With the real map carrying its own detail as the view zooms in, the drawn
city markers had nothing to add and are gone, along with the coordinate
table behind them. Only the country's extent remains, to open the picker on.
-editor no longer inherits the scenery named in eu07.ini. That is whatever
was last driven, which has nothing to do with editing; without an explicit
-s the editor opens on empty ground.
The location picker now shows the real topographic map instead of a
hand-drawn outline, fetched as one WMS image for whatever box is on screen;
the schematic border is gone and only the city list remains, to jump the
view somewhere recognisable. Under the plan itself a georeferenced map gets
the orthophoto, tiled through the layout library's own EPSG:2180 grid and
cache.
What a native build was missing is here: the download (WinHTTP, on worker
threads), the decode and the texture. Finished transfers are handed back on
the thread that drains them, so both the library's cache and the graphics
API stay on one thread. The imagery service turns down browser user agents
and fails the odd request even for a plain one, so requests go out as curl
and are retried a few times.
Starting a new map now drops the loaded scenery and comes back on empty
ground, instead of leaving the previous scenery's contents under a plan that
has nothing to do with them. The reload is deferred to the top of the frame:
taking the editor off the mode stack while it is drawing its own panels
would pull the ground out from under them.
"New map" now asks what is being started. A fictional scenery keeps its own
frame, where coordinates mean nothing outside it. A real one pins the
scenery's zero to a point picked off a map of Poland, so the plan is drawn
in EPSG:2180 - the frame the layout library already works in, and the one
Geoportal serves imagery in.
The projection is the standard transverse Mercator series for PUWG 1992 on
GRS80. Checked against known values: the central meridian comes out at
easting 500000 exactly, Warszawa at 637382/486757, Krakow at 567614/244588,
Gdansk at 477038/720937.
The map behind the picker is a schematic border outline plus the larger
cities, projected from geographic coordinates on first use. It is coarse on
purpose - it is there to point at a region, not to measure against - and the
dialog says so. No network is involved.
The plan panel had its own 2D canvas, which was the wrong place for it: the
layout is drawn on the scenery. The canvas is gone. Points are laid by
clicking the ground under the cursor, the solved geometry is painted over
the rendered world through the colour pass camera, and the panel keeps only
the controls - fits, storage and what is being edited.
The left button belongs to the plan tool while it is up, so a click no
longer also picks or places a scenery node. Clicks landing on a panel stay
with the panel.
With no georeference set the plan frame and the world share an origin, so
easting runs along world x and northing against world z.
Opening the Plan tool now switches the whole colour pass to an orthographic
projection and pins the camera looking straight down, so the plan is drawn
against the loaded scenery rather than in a window of its own. Closing the
tool hands the camera's orientation back; leaving the editor clears the view
outright. The wheel changes how much ground fits on screen instead of moving
the camera, which with no perspective would change nothing but the clipping.
Both configured backends follow: the experimental renderer swaps the pass
projection (and fits its shadow cascades to it), the modern GL renderer uses
its existing ortho helpers. Everything reading the pass projection - the
mouse ray, the frustum test - picks the change up on its own.
The experimental renderer also publishes its colour pass camera now, which
it previously left at the interface defaults, so overlays can place world
points on screen.
A "Plan" panel, opened from Track layout in the editor's menu bar, draws a
niweleta the way the web frontend did: click to lay chained straights, drag
a corner to move it, and pick a fit for each gap between them. The geometry
is entirely maj0sted's - the panel gathers the input, hands the document to
solve_project and paints the rails that come back, coloured by whether they
came from a straight, an arc or a clothoid. Scenery nodes are untouched.
A fit the library cannot produce is simply absent from its answer, so the
gap is labelled as not fitting rather than left looking as though its
parameters took effect. Save/load go through the library's own document
format, so a project written here opens in the same state.
Also translates the comments added with -editor into English, matching the
files they sit in.
The scenery camera is set up by the driver mode, which never runs when the
exe starts straight in the editor - the editor then copied an untouched
global camera and rendered a black view with only the UI on top. Entering
the editor as the startup mode now initialises the camera itself, falling
back on a view above the origin for sceneries that name no camera, and
resets the timers so the loading time does not land in the first frame.
The editor was reachable only from the driver mode with F11, which meant
loading a scenario and starting the whole simulation first. With -editor
the scenario loader hands over to the editor instead of the driver, so
physics, AI and timetables never run - only the loaded world is there to
be worked on.
Without -s the scenery from eu07.ini is used, falling back to pusta.scn
when the ini names none. F11 quits instead of popping the mode, since the
editor is now the bottom of the mode stack and popping it would leave the
rest of the frame reading an empty one. Editor entry forces free-fly even
with no vehicle to leave.
Drop-in copy of C:\Users\maj00r\Projects\maj0sted-master minus its web/
directory - the WASM frontend is not being ported, the editor drives the
same C++ API natively. What is left is plain C++20 with no dependencies:
domain model (niweleta, plan and profile geometry, fitting, parallelism),
project serialization, rail sampling and the editor document.
src/web/ribbon.cpp was missing from the library source list; added, since
without it the ribbon symbols never make it into the archive.
MS DXC on Windows (at least IDxcUtils::BuildArguments) does not support forward slashes in UNC paths. This change feeds it native format with backslashes.
This makes it possible to build Linux and Windows binaries from a single source on a network share.
This is a regression introduced in 7525b54f (merged via df5a8a89), GLM_FORCE_DEFAULT_ALIGNED_GENTYPES causes visible screen corruption, particularly in the smoke from chimneys or vehicles.
It causes the game to crash on launch while attempting to use SIMD
instructions when compiled with GCC or Clang.
Since it's known to work on MSVC and was enabled due to performance
improvement, leave it enabled there.
Simplified lamp logic by reducing unnecessary brackets, `if` statements, ternary operators and boolean comparisons.
Added new lamps:
- `i-gear1` - 1st gear in the gearbox is active
- `i-gear2` - 2nd gear in the gearbox is active
- `i-hydrolockup` - The gearbox is locking the engine and wheels together
Additionally, fixed motor overload and differential relay lights not turning off when the battery is turned off.
In TSegment there were two different formulas for a derivative. Most places called GetFirstDerivative() that used the direct formula from the curve points. However RaPositionGet() had its own calculation based on pre-computed cubic polynomial coefficients. This latter method is faster and simpler, so change GetFirstDerivative() to use it and change RaPositionGet() to just call GetFirstDerivative().
TSegment::GetTFromS() is a significant hotspot in the non-rendering part of the state_manager update (about 13%). This change introduces a FastGetTFromS() version that interpolates from precomputed values instead of doing the whole calculation on every call. Computing position from track distance is now done in constant time. This reduces the contribution to about 0.3%.
