18
0
mirror of https://github.com/MaSzyna-EU07/maszyna.git synced 2026-11-20 17:25:00 +01:00
Commit Graph

253 Commits

Author SHA1 Message Date
a83d5c6978 feat(editor): presets of the track properties, applied on the selected tracks
(cherry picked from commit 83c8c23c80)
2026-10-24 16:33:24 +02:00
Claude
f30fefd91c Sieć trakcyjna: przęsła wg typów sieci, wysięgniki z katalogu, bramki, kotwienia i edytor sieci
Sam kod exe z gałęzi siec-trakcyjna (bez testów, notatek i danych z tests/catenary).
Dane (data/traction_*.txt) leżą poza repozytorium.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019Tqn7T8D1Gx3ptKtZgNtX5
2026-10-23 23:15:00 +02:00
maj00r
4d2f95aa43 feat(editor): the tracks laid on the terrain model go onto it as the tracks going onto the terrain do, the chain laid since the laying began fitted again at each click, with the tracks around kept and met; a straight or an arc cut by the fit before made one again, a path cut only where it would part from the line by more than 3 cm; a choice of the heights while laying: fitted, from point to point, level, kept in the settings; the fit taken back with its click 2026-10-23 15:55:58 +02:00
maj00r
a892532fda feat(editor): the top view draws the tracks whole, without the ballast or the rails alone, in a colour of their own over the imagery and the map: both rails close up, one line further out; a choice by the extent and in the View menu, kept in the settings 2026-10-23 13:20:06 +02:00
maj00r
fe3dd758ea feat(editor): the signalling, the hectometre posts and the terrain go to layers of their own: <scenery>_srk.scm, _hektometry.scm, _teren.scm, made by the first of them and included by the scenario file, the active layer left as it is; the station descriptions of the signalling there too 2026-10-23 13:07:14 +02:00
maj00r
eab3dca700 feat(editor): the Signals tool goes into the signalling one: its templates under Signals in the SRK panel, the ones the station's signals are placed with too; a click on a tile or Place by a track arms placing, Esc or a click on the armed tile stops it, a click on a track else opening its station; a signal picked in 3D or in Signal heads shows its card at the top of the panel, its template, to the other side, turn around; H no longer a tool 2026-10-23 12:26:07 +02:00
maj00r
2d9be3ae10 feat(editor): a deleted track leaves its signal reads and its track circuit to the track laid in its place, and the SRK check lists the signals no track reads and the broken lines, with a Repair
A deleted track whose read events or track circuit no other track took says so by the cursor, naming the signals and the circuits, and the editor keeps them for the track laid in its place, within a metre of its axis. The read of each signal goes to the piece by the signal, on the list its facing there gives, so a track laid the other way round keeps the trains reading it; the other events go to the piece at its middle, the circuit to a track lying there for the most part, a new track taking it instead of the one of the track it was made from. It happens in the step which lays the track, so Ctrl+Z takes it back and laying it again gets them again; a track which took a circuit over and is removed by another step leaves it to that step, and the events of a signal taken away stay off the tracks.

The SRK panel of a station lists what it and its lines need: signals no track reads, lines broken off where the tracks go on beyond a gap, tracks of a line of the automatic block in no block section, block sections whose tracks are gone. A row shows the place; Repair has the track by each signal read it again, as moving it does, and sets the line signals again where tracks are in no block section. A warning after an operation shows by the cursor in amber, a refusal in red as before. srkcheck counts these too, srkfix repairs, join takes the height of the ends for sceneries far above zero.
2026-10-22 22:40:01 +02:00
maj00r
c024d7c262 feat(editor): the signals and the signs by a track go with it as the Plan lays it anew, square to the line, not along it
A curve laid anew, its radius changed or made compound, or a straight moved: the paths of the chain are cut again where their joints stood, set square onto the new line, each keeping its stretch of the ground, so their events, their track circuits and the cuts of the block sections stay where they were instead of being handed on along the line; the parts between the switches alike, the old even sharing kept where the joints don't follow one another along the new line.

The objects by a track taken for a change go with it by themselves: the signals and the warning discs it or its run reads, the SHP resonators by their events, and the controls of the block sections, the hectometre posts, the W17 markers and the other signs by the track nearest to them, within 12 m. They move square to the new axis keeping their offset and their turn, an object moved by hand meanwhile staying where it was put. Such a binding isn't kept in the scenery nor shown among the bound objects of the infra tool, which can still bind the object for good, and the undo and the redo take the objects back and forth with the tracks. The status of the Plan tells how many objects moved with the tracks. A path taking an object over the other way round keeps it on its side, turned as it was.
2026-10-22 21:32:34 +02:00
maj00r
a3e1624caf feat(editor): the lines out of a station take the automatic block of 3 or 4 aspects, the block sections no shorter than the braking distance or than half of it, the block signals placed with the templates of the aspects and those standing swapped for them; block boundaries drawn by hand, a click on a track of a line of the automatic block placing block signals across both tracks there, numbered after the hectometre, the tracks cut beyond them and the block sections named and switched anew, a click on one standing taking its signals and the switching of their sections away, a step of undo each, the lengths of the sections either side shown at the mouse. A line whose block signals stand keeps them as they stand, Set the line signals placing them evenly only on a line without any, and one whose block signals no block section of the editor switches keeps the block of the scenery untouched; the signals of the other block left along a line taken away, but where it shares its track with a line of that block, and the switching of the sections gone from the lines set with them. A block signal of 4 aspects is checked for a section no shorter than half the braking distance, and fitted with templates of its aspects only 2026-10-22 19:26:26 +02:00
maj00r
b92d1283ac feat(editor): a block signal template knows its aspects, 4 where its events give S3, the green light flashing with the next signal at S5, else 3; one step of the signalling takes includes away too, the signals among them with their read events, Ctrl+Z bringing them back with the rest of it 2026-10-22 19:26:25 +02:00
maj00r
edb4f7c60d feat(editor): the panel of a signal picked swaps its template for another of its kind and mount, the name, the plate, the place and the read event kept, a head leaning to one side for its counterpart leaning towards the track; one step of undo, the selftest signalswap 2026-10-22 18:55:13 +02:00
maj00r
9c124b23bb refactor(editor): a signal head tells the next one shows stop by its chambers alone, an orange light above the red one, not by the events of its template reading the next signal, which the templates of the old sceneries lack 2026-10-22 18:54:54 +02:00
maj00r
92552b49cd feat(editor): the SRK tool checks the lights of the signals against the routes of their trains: the speed of each route through the switches by the radius of their curves and the speed set on them, 40, 60 or 100 km/h, a lower orange light for these with an orange strip for 60 and a green one for 100 as Ie-1 gives them, an upper orange one where the next signal can show stop, the white one of the substitute signal; a signal telling of the next one nearer than the braking distance slows the trains with it at stop, Ie-4 § 8 ust. 5, a W21 for 140. The templates read for the speeds their events show; the signals set get the template of the kind with these lights and the least beyond them, the standing ones fitted so in one step of undo, the template swapped with the name, the plate and the read event kept, a variant leaning the other way only with the same speeds. The braking distance shown with the speed of the main tracks it follows, set by hand in the record of the station and used for the block sections too; the warning discs and the block sections nearer than it marked, the signals that don't fit marked in the schematic and the scenery 2026-10-22 16:07:04 +02:00
maj00r
2452c1cd0d fix(editor): the tools see each change of the history by a revision of it, not by its size, which stood still once the oldest steps were dropped at the limit of 200 and came back to the same after an undo and another change: the SRK schematic, the lineside lists, the gauge, the joints, the speeds and the parallel track missed them 2026-10-22 16:06:25 +02:00
maj00r
7cc8e5bb9a feat(editor): the kilometrage tool leads a line through a station along the tracks chosen, the straight paths of the switches by default, from the track chosen on along them until the line meets its tracks again or on and away at a junction, kept as //$k via lines; a track beside that comes back onto the line between the stretches it runs beside it or both ways is a track of a station, not the other track of a double-track line 2026-10-22 14:16:42 +02:00
maj00r
5ecb6ebe00 feat(editor): the kilometrage tool sets the km of the railway lines, points where the km is known and jumps of the km, the rest along the axis of the line, between the tracks of a double-track one and along the longer track where they run apart, kept in the scenery as //$k lines
The track mode Kilometrage (X, under More) puts a point of the km where a track is clicked: the line, the km and, at a jump,
the km on from it. The axis of a line follows the main paths of the switches through the tracks of its points; on a
double-track line it runs between the tracks, and where they part on formations of their own and come together again it
runs along the longer one, the shorter one going by its own length with its last hectometre before they meet taking up
the difference (PKP GK-1 6.1.12). The km between the points are stretched to the length of the scenery evenly; the panel
lists the points with the stretch, the 3D view shows the axis, a tick at each hectometre, the points with their km and
the km of the lines by the mouse. Read the km from the posts turns the hectometre posts along the line into the points
of its km, a jump where two runs of numbers meet, and warns of a jump on a curve or at a station (Id-1 § 19). Each change
is a step of undo.
2026-10-22 13:27:37 +02:00
maj00r
46e665c468 feat(editor): the signalling mode sets the signals of the lines out of a station, the automatic block signals and the block sections to the next station on a double-track line, a warning disc before the entry signal on a single-track one
The station keeps its km and the direction of its numbering in its record. The block signals are named after their km, odd on track 1 and even on track 2, the sections after the signals at their ends, and each signal gets the control of its section.
2026-10-22 12:13:22 +02:00
maj00r
8f8a1518b7 feat(editor): the signalling mode places the signals of a station and names them as PKP PLK does, the entry ones out on the lines with the circuits before them, the exit ones at the ends of the station tracks, the shunting ones at the shorter tracks, and renames the signals standing in their places 2026-10-22 11:07:58 +02:00
maj00r
8c5795348f feat(editor): the signalling mode finds the station of a switch, lays it out as a schematic along its main track and keeps its name, code and line in the scenery 2026-10-22 07:35:31 +02:00
maj00r
0d9fa6337d feat(editor): the whole-scenery grade fit sets the tracks over a bridge or a viaduct to the bridge environment
Where the terrain model falls away under a fitted line by the abutments, the paths are cut off at the ends of the stretch as the line is applied and set to the bridge, in the same step of the history: they sound as on a bridge, get no formation and the terrain under them stays as the model has it, also after the scenery is saved and opened again. Tunnels and tracks set to the bridge already are left as they are. The status says how many paths went on a bridge.
2026-10-22 02:45:19 +02:00
maj00r
f361bc406b feat(editor): the whole-scenery grade fit keeps the tracks a station shares at one height, lets the switches lie on the vertical curves the regulation allows, runs straight through the double slips and leaves the bridges out of the faults
A switch may lie on a concave vertical curve, and on a convex one no sharper than 2000 m (Dz.U. 2026 poz. 1225 § 58 ust. 16): the fit bends over the switches and their shared timbers where the ground does, a curve on a switch is a warning, and only a sharper convex one an error. A sharp crest of a hump keeps its curve off the switch zones. The zone of a crossing reaches only as far as the path crossed has rails, so the middle of a double slip keeps to itself.

A line runs through a switch along its main path, and through the quarters of a double slip straight on, so the long lines go through the slips and the connections between them are fitted after. Rails of the lines fitted already nearer than a sleeper is long are taken at their height, as both lie on the same timbers. A short line between two lines whose end grades can't be joined within the norms keeps only the heights of its ends, and the grade breaks at the joints. The norms speed of a line is the one most of its length is laid for, so a few tracks set much faster don't stiffen the curves of all of it.

The fault finder leaves out the places over the terrain model on a bridge or a viaduct, the ground falling away under them by the abutments. A formation modifier may be open at its start or end.
2026-10-22 01:48:04 +02:00
c5a894a674 feat(track): rails and ballast blended into those of the tracks joined, where their textures differ 2026-10-21 22:34:57 +02:00
maj00r
9fedbaf6a8 feat(editor): the design speed the norms lay for is shown by the cursor with the track it comes from, and can be the one set for the laying
Laid to the norms, the readout says the design speed of the transition curves and of the cant: that of the track the laying goes on from or joins, or the one set for the laying. A new option takes the set speed also on from a track with its own, the new tracks get it; Ctrl+Shift+wheel steps it while laying and turns the option on. The panel shows the speed the laying under way is designed for.
2026-10-21 20:28:34 +02:00
maj00r
415c7484ec feat(editor): laid to the norms, a track laid on from an end gets its transition curves, into the arc, between the arcs of a compound curve and out to the straight
A track laid on from a free end in the PKP PLK laying, by a drag out of the end, by clicks from it or laid back onto it, starts from the curvature and the cant the end has. An arc turning the same way as the end is a compound curve: a transition of the norms ramps the curvature and the cant from the one arc into the other. From a straight the arc gets its entry transition, the arc then straight its exit one. Where the way is too short the transitions are cut and the cant lowered to what they ramp, and the readout says so; with no room at all the track is laid as before and the note says why. The curves traced on the orthophoto and the recommended values of a compound curve get the transitions between their arcs too. The free laying stays as it was.
2026-10-21 19:51:56 +02:00
maj00r
5764b328be feat(editor): a curve of the plan traced on the orthophoto, the points clicked along the track give its radius or the radii and the shares of a compound curve 2026-10-21 18:54:14 +02:00
maj00r
21595ba010 feat(editor): the tracks are laid to the PKP PLK norms unless the free laying is chosen, asked as the laying starts
The free laying isn't the default any more. The first time a session opens the laying or the plan, a window asks how the
new tracks are laid, with the two cards of the panels (the norms marked as chosen); a click on one of them takes it and
closes the window, which comes before the offer of the terrain model of a new scenery. "Remember the choice, don't ask
again" keeps it in eu07_editor.ini (track_norms ask, free or plk), and a choice kept follows a later click on the cards of
the panels; the settings of the editor (General) choose between asking and either way. The self-test scripts start with the
free laying, as they were written for it.
2026-10-21 18:23:49 +02:00
maj00r
79642a95c7 feat(editor): a measuring tape in the track mode, M: the distance, the difference of height, the grade and the azimuth between two clicks
M in any tab of the track mode turns the tape on: a click puts its start, the next one its end, at a free end, on the axis
of the track under the cursor or else on the ground. The readout at the cursor gives the distance in plan and in space,
the difference of height and the grade between them and the azimuth, while the second point follows the cursor and once
it's put; a further click starts a new measure, M or Esc puts the tape away. Self-test command tape.
2026-10-21 17:57:05 +02:00
maj00r
8171bdc7d5 feat(editor): zoomed in from above, the curves are labelled with their radius and length and the switches with their name and type
In the top view at a metre a pixel or closer, each curved track of 5 m or more gets "R 600  L 120" by its middle and each
switch its name and its type from the kept switch record ("Rz 60E1-300-1:9 P") by its start, on a dark plate as on a plan.
A label which would cover another one is left out, the switches going first and then the sharper curves. View > Track labels
in the top view switches them off.
2026-10-21 17:51:45 +02:00
maj00r
6a5f0d735d feat(editor): the tracks of the track mode can be coloured by their radius, speed or grade, with a legend
View > Track colours draws the rail tracks over the view in bands of the radius of their paths, of their speed or of the grade
along them, from above over the whole view and in the 3D view within 1.5 km of the camera, with the legend of the bands in
the bottom right corner. Plain keeps the lines of the top view as they were. Self-test command trackcolours.
2026-10-21 17:47:42 +02:00
maj00r
4db3dd70d3 feat(editor): the free ends of the tracks are marked red in the track mode
Each end of a rail track joined to nothing, where a train would run off, gets a red dot next to the white dots of the joints,
in the 3D view near the camera and from above over the whole view. The ends are looked for again after an edit or once the
camera leaves the place they were found for, not every frame.
2026-10-21 17:34:36 +02:00
maj00r
e86a536a9d fix(editor): a point taken out of a grade line leaves its neighbours with the radius of the limits, and paths meeting at a sharp break keep their own grades
The points of a grade line read from the tracks keep the radius measured there; once a point between them was taken out, the
breaks of its neighbours changed while their radii stayed, so a break without a curve read as 0.4 per mille became one of
9 per mille with no curve, and the tracks took it as a kink. The neighbours of the point taken out follow the limits now,
with the button, Del and the self-test alike (profile_remove_point).

Applying a line with a break without a curve gave the path which ends at the break the grade of the element after it, so
its Hermite heights bowed 0.12 m off the line over 100 m before the break; each path takes the grade on its own side now.

Self-test commands vprofilerun, vprofiledel and vprofileput.
2026-10-21 17:25:17 +02:00
83c8c23c80 feat(editor): presets of the track properties, applied on the selected tracks 2026-10-21 16:09:05 +02:00
maj00r
d2d06817bc feat(editor): the track laid on the terrain gets its grade line from the profile solver
In place of a line bent every ten metres to keep within 0.1 m of every bump,
the grades and the vertical curves are fitted to the ground the way the
profile fits them. Where the formation is made in the terrain model the line
keeps to the radius of the norms and cuts and fills; over the ground left as
it is it bends as sharply as it has to. The joints keep the height and the
grade of the track joined, no grade is capped and no piece is under 5 m.
2026-10-21 13:20:47 +02:00
maj00r
a39a3d4dbe feat(editor): the terrain model loads from a clearer panel and follows the tracks edited
The panel gives the place on the map or typed, the area, one main button, a
progress bar with Stop and a banner over the view while it loads. The terrain
grown ahead of a track goes on at the height of the one beside it and skips
the ground made by hand. The formations follow the tracks moved, laid and
removed, in the same step of the history; a whole load is one step, the
ground grown ahead none.
2026-10-21 13:20:39 +02:00
ae3e063df0 Add a list of the terrain chunks to the editor 2026-10-21 13:15:44 +02:00
maj00r
da18883558 feat(editor): what the editor refuses shows by the mouse cursor
An error put in the status bar also shows for 4 s by the cursor, and the
refusals the tools kept in their panels (a curve which can't be laid,
a switch which doesn't fit, a signal which can't be moved, a drive
without the variant) go there as well.
2026-10-21 11:47:26 +02:00
maj00r
825c91705d fix(editor): the free design gets no transition curves from the Plan tools
Dragging an end of a straight refits the curve next to it with the cant
and the transition curves recommended for the speed, keeping the curve's
own only where it had some; a plain arc laid freely came out with
transitions. Break and S-curve took the recommended transitions too. The
recommendation of a design not checked against the norms is a plain arc
now, the tools take the norms in effect rather than the ones the design
was last computed with, and the Plan panel calls the automatic choice
"None" in the free design. Self-test: norms free|plk.
2026-10-21 11:47:25 +02:00
maj00r
ddde8d12d9 fix(editor): Esc takes back what a drag did
Esc in the middle of dragging a point of a track kept the moved point,
and the hint said so; dragging a straight was taken back but left an
empty step in the history; a vertex or the radius grip of a curve stayed
moved in the design. Now Esc puts back what was there before the drag in
all three, and the history doesn't keep a step for it.
2026-10-21 11:09:06 +02:00
maj00r
7da0432dca fix(editor): a signal goes to the other side of the track and turns around
Dragging a standing signal over the track takes it to the other side;
the side used to come from where the signal stood, so it never crossed.
The selected signal gets "To the other side" and "Turn around": the
first mirrors it over the axis facing the same trains, the second turns
it to the trains of the other direction and moves its event to the
other event list of the path. Either one swaps a head leaning to the
track for its counterpart, and an include keeps the template its
directive names, so undo brings the old file back too.
2026-10-21 10:44:58 +02:00
maj00r
747c6817f0 refactor(editor): the tools get the roles of the editor they need, not all of it
editor_services was growing into one interface every tool depended on
whole. It splits into the roles the editor plays for its tools: the
selection, the view, the undo history, the templates by the track, the
ground with the terrain model, the track design and the guide of the
first steps. Each tool is handed only the roles it uses, so what it
depends on can be read from its constructor; editor_services stays as
the sum of the roles the editor implements.
2026-10-21 10:08:27 +02:00
maj00r
872e1b5e19 refactor(editor): the parallel track is a tool of its own
The seventh tool out of editor_mode. It reads the selected set of tracks
and the tab shown through the services, digitizes the tracks it lays and
refreshes the plan after it sets one parallel to another. The panel shown
for two selected tracks is a public call of the tool, and the self-test
command parallel moves with it and lays the same tracks as before.
2026-10-21 09:54:39 +02:00
maj00r
6ee771bb22 refactor(editor): the hectometre posts and the fouling points are tools of their own
The fifth and the sixth tool out of editor_mode, the two lineside ones
sharing their file. Placing, moving and taking out the templates which
stand by the track become services of the editor, with the template
types of their own, and so do the tab of the track tools shown, the
ground under a point and the first step done. The context menu, the
click on a fouling point in the view and the lineside tabs go through
the public calls of the tools. The self-test commands hekto and fouling
move with them and log the same as before.
2026-10-21 09:50:38 +02:00
maj00r
c45c4713d6 refactor(editor): the trainset is a tool of its own
The fourth tool out of editor_mode. The track under the cursor and the
first steps of the tutorial become types of their own, which the editor
gives to the tools, and a tool shown as a tab of the lineside panel keeps
its open and expanded flags in a tool_tab. The trainsets waiting for the
save are handed to the editor by the tool, which hears back when they
were written. The self-test command trainset moves with it.
2026-10-21 09:44:17 +02:00
maj00r
8ba8345faf refactor(editor): the joints check is a tool of its own
The third tool out of editor_mode. It reaches the terrain model and the
places of the tracks on it through the services, the place of a track
for the terrain model is a type of its own now, and the laying and the
switches ask the tool for the kink it allows. A self-test command can
ask to be run again in the next frame, as the check against the terrain
model does while the model comes in.
2026-10-21 09:23:36 +02:00
maj00r
0c2880f48f refactor(editor): the speed check is a tool of its own
The second tool out of editor_mode. Tools get two more hooks, the overlay
drawn over the view and the options in the tool window, and the editor
gives them the track it focuses on, the node it makes current, the norms
of the route design and the snapshot of the tracks for the undo.

The check gets a self-test command, speedcheck <scope>, which runs it
through and logs the paths found too fast for their geometry.
2026-10-21 09:10:27 +02:00
maj00r
3c9c90b468 refactor(editor): the structure gauge is a tool of its own
The first step of taking the tools out of editor_mode: a tool keeps its
own state and reaches the editor through editor_services, the few things
it needs from it, instead of through every member of the editor. The
editor holds its tools in a list for the hooks they share: a deleted
node is forgotten by all of them in one place, and a self-test command
the editor doesn't know goes to each of them.

The gauge moves with its state, its window and its self-test command;
the ImGui ids and the texts stay the same, and the self-test gives the
same hits on the test scenery as before.
2026-10-21 09:00:59 +02:00
maj00r
4512ed4e0b fix(editor): guard the places where the editor could crash outright
Found with an address and undefined behaviour sanitizer build, random
monkey sessions on the test sceneries and broken inputs:

- A deleted model left its pointer in the pick list of the renderer, the
  bound node of the panels, the bindings of the infrastructure and the
  selection: the next pick or panel frame read freed memory. The renderer
  forgets it, and one erase_model does the cleaning for all the places
  which deleted a model by hand.
- The plan band of a route read the vertex before the first one in the
  frame a drag was let go.
- A scenery which can't be opened goes back to the launcher with the
  reason in the log, a track of an unknown type or a tributary loads as
  a normal track or a river with a message, and a spline with no finite
  length or step gets a sane number of segments.
- Typed numbers which aren't (NaN, inf, ends 0 m or 1000 km apart, a
  vector of 1e30, a diverging track part of 5 km, a curve threshold of 0,
  a zero history size, radius norms below zero) are refused or clamped,
  where they made the geometry run away or divide by zero.
- Folders which can't be read and file names which aren't valid in the
  locale no longer throw out of the scans of sceneries, textures, sweeps,
  roads and signal plates; the scans skip them.
- The launcher: Ctrl+Del with no trainset selected, a dropped vehicle
  whose skin is gone and a text with a percent sign.
- A terrain mesh made for another resolution of its chunk isn't put into
  the chunk, and a slot is reused only for a mesh of the same size.
- Vehicles on a track changed by the editor are moved over a copy of the
  list they leave.
- The table of the keyboard shortcuts gives its stretched column a
  weight, else ImGui divides 0 by 0 in the first frame of the window.
2026-10-21 08:42:29 +02:00
f3bdadad66 feat(terrain): holes cut in the heightmap terrain and shader grass painted over it 2026-10-20 01:32:01 +02:00
maj00r
af9e836632 feat(editor): the terrain of a scenery begun from nothing grows where the track is laid
The terrain model was made once around the camera when a new scenery
took it; tracks laid on past it went over nothing. While a track is laid
or dragged out, the chunks missing within 400 m of the cursor are now
made from the model too, the nearest first, in a scenery with the
heightmap terrain placed on the map. The formations aren't made anew
after such chunks. A chip in the terrain panel turns it off.
2026-10-19 19:01:49 +02:00
maj00r
bedef1f2af fix(editor): a touchpad no longer flips through the shapes nor throws the zoom far out
A touchpad under Wayland sends a scroll as many fractions of a notch.
Shift+wheel took each of them for a step and went round the shapes of
the laid track, the joins and the connections several times in one
swipe; now the fractions are gathered into whole notches and a gesture
moves such a choice one step. Ctrl+wheel steps the radius once a notch.

The 3D zoom measured to the level 0 when nothing was under the cursor,
which in a scenery on the terrain model lies far below or kilometres
ahead, so a light swipe at the horizon flew the camera away. It
measures to the ground under the camera now, backs away by no more than
four heights of the camera over it, and takes at most two notches at a
time. Self-test laystate tells the shape, the radius and the camera.
2026-10-19 18:54:08 +02:00