18
0
mirror of https://github.com/MaSzyna-EU07/maszyna.git synced 2026-11-21 09:44:59 +01:00
Files
maszyna/tools/track_uneven_grade.py
maj00r 7524cfbcc2 feat(track): unevenness waves shaped by the track spectra of FRA and ORE B176 (#426)
* feat(track): unevenness waves shaped by the track spectra of FRA and ORE B176

The waves were 5-42 m sideways and 8-83 m vertically, with the long ones
cut down, so a short wavelength carried a large share and the ride and
the rails looked busy. They are now 7-90 m sideways and 8-110 m
vertically, about the bands D1-D3 of EN 13848, each wave standing for a
band of the spectrum S ~ Wc^2 / (W^2 (W^2 + Wc^2)), Wc = 0.8245 rad/m,
the shape the FRA and the ORE B176 (German) spectra share: the longer
a wave, the higher it is.

The "uneven" value keeps its meaning, the peak deviation of a rail on a
10 m chord as PLK Id-14 measures it, so the values in sceneries stay as
they are. Since the chord sees the long waves less, the amplitudes are
calibrated again, and apart for the vertical and the sideways waves:
stray_per_mm becomes stray_up_per_mm 0.00229 and stray_side_per_mm
0.0031, and cross_share 0.35. A track at "uneven 18" measures 18 mm
vertically, 17 sideways, 15 of twist, +-10 of gauge, 21 of cross level
and J 5.7 against the Id-14 limits for 80 km/h. A rail now goes up to
about 5 cm off its design over the long waves, so the bound of the test
goes from 40 to 60 mm; the short waves the cab shakes on are smaller,
the sideways bend under the axles about 30% less.

Every scenery with unevenness looks and rides differently after this.
No release has unevenness yet. The grading tool follows the vertical
waves; on Baltyk the pantograph keeps within 0.6 cm of the wire up to
the product 1150 of the vertical value and the speed (925 before).

* test(track): bound the sideways offset of an uneven track off its design

The longer waves move the track about 4.5 cm sideways off its design at
"uneven 18" (2 cm before), and nothing checked or stated it. The Id-14
test now bounds the peak sideways offset of the middle of the track
below 5 cm, next to the vertical one, so a later change of the shares
can't double it unnoticed. The doc gives the figure, and names platform
edges and level crossing panels among what a rail moves away from.

---------

Co-authored-by: maj00r <maj00r@host>
2026-11-20 03:54:20 +01:00

29 KiB