maj00r e86a536a9d fix(editor): a point taken out of a grade line leaves its neighbours with the radius of the limits, and paths meeting at a sharp break keep their own grades ...

The points of a grade line read from the tracks keep the radius measured there; once a point between them was taken out, the
breaks of its neighbours changed while their radii stayed, so a break without a curve read as 0.4 per mille became one of
9 per mille with no curve, and the tracks took it as a kink. The neighbours of the point taken out follow the limits now,
with the button, Del and the self-test alike (profile_remove_point).

Applying a line with a break without a curve gave the path which ends at the break the grade of the element after it, so
its Hermite heights bowed 0.12 m off the line over 100 m before the break; each path takes the grade on its own side now.

Self-test commands vprofilerun, vprofiledel and vprofileput.

2026-10-21 17:25:17 +02:00

..

icons

feat(editor): the parallel track is a tool of its own (N) in the toolbar, its green preview only shows there, Shift+click on a straight in L opens it with that track; the norms are two buttons at the top of the Lay panel and of the Curve tool, shared by both, free hides the recommendations of the curve and its norm warnings, the duplicate transitions checkbox is gone; the Lay panel starts with the radius, the speed and the shape; the Tracks toolbar shows the tools that lay track, the ones that correct a line are under More (remembered); First steps ends with driving the track laid; self-test command tracktab

2026-10-12 01:52:28 +02:00

editorAlignment.cpp

fix(editor): the free design gets no transition curves from the Plan tools

2026-10-21 11:47:25 +02:00

editorAlignment.hpp

feat(editor): a join of ends side by side shifts the track with reverse curves over the whole gap

2026-10-19 18:40:43 +02:00

editorAlignmentStore.cpp

feat(editor): digitizing takes the good parts of a line: a run whose design can't be read whole is split at the track the reading fails at and each part is digitized on its own, only single tracks that make no line are left out and named in the log; Digitize all reports the lines digitized and the paths left out, opening a line digitized in parts says so with the reason for the paths left out; a stored radius agrees with the one its design makes within 0.1 %

2026-10-12 18:00:26 +02:00

editorAlignmentStore.hpp

feat(editor): digitizing takes a line whose tracks lie up to 0.5 m off the curves read from them: the record keeps how far as fit in its source line and counts the tracks within it as lying on it, so they aren't shown as departed; a record whose elements differ from the ones its design makes only by elements of no length is no longer reported as differing

2026-10-12 17:42:40 +02:00

editorClips.cpp

feat(editor): Help > Tutorial instead of First steps: seven lessons (looking around, laying track, curves, joining, switches, selecting and fixing, saving and driving), each with a looping clip from lang/editor_tutorial/<lesson>.gif played from the start on a click, the mouse buttons and keys drawn as pictures beside what they do, ticks that fill in when the user does it, a button that turns the right tool on, Back / Next and a dot per lesson that turns green when it is done

2026-10-17 23:30:37 +02:00

editorClips.hpp

feat(editor): Help > Tutorial instead of First steps: seven lessons (looking around, laying track, curves, joining, switches, selecting and fixing, saving and driving), each with a looping clip from lang/editor_tutorial/<lesson>.gif played from the start on a click, the mouse buttons and keys drawn as pictures beside what they do, ticks that fill in when the user does it, a button that turns the right tool on, Back / Next and a dot per lesson that turns green when it is done

2026-10-17 23:30:37 +02:00

editorConnections.cpp

feat(editor): connections of tracks laid whole from the switch tool: a crossover with a straight insert or an aligning curve between switches of different angles or tracks that aren't parallel, a double crossover meeting on either track, a scissors crossover with the crossing of its inserts, and a switch ladder onto the parallel tracks of a fan or onto new ones at given spacings; press on a straight and drag onto the other track, Shift+wheel the kind, Ctrl+wheel the R of the aligning curve, Alt+wheel where a double crossover meets; the ghost shows the whole set with the spacing, the inserts and the distance of the mathematical points; switches get their drives and a //$r connection record; the crossover drawn from a diverging end uses the same solver; self-test connection

2026-10-14 23:38:31 +02:00

editorConnections.hpp

feat(editor): connections of tracks laid whole from the switch tool: a crossover with a straight insert or an aligning curve between switches of different angles or tracks that aren't parallel, a double crossover meeting on either track, a scissors crossover with the crossing of its inserts, and a switch ladder onto the parallel tracks of a fan or onto new ones at given spacings; press on a straight and drag onto the other track, Shift+wheel the kind, Ctrl+wheel the R of the aligning curve, Alt+wheel where a double crossover meets; the ghost shows the whole set with the spacing, the inserts and the distance of the mathematical points; switches get their drives and a //$r connection record; the crossover drawn from a diverging end uses the same solver; self-test connection

2026-10-14 23:38:31 +02:00

editorFormat.hpp

refactor(editor): the helpers repeated over the editor files are shared

2026-10-21 10:28:42 +02:00

editorGauge.cpp

Structure gauge refactor: outline ring, tilt in the sections, outline choice, shared track line

2026-10-04 02:22:57 +02:00

editorGauge.hpp

Structure gauge refactor: outline ring, tilt in the sections, outline choice, shared track line

2026-10-04 02:22:57 +02:00

editorGeoMap.cpp

feat(editor): a map of Poland to pick a place on, shared by the scenery wizard and the terrain model

2026-10-21 13:20:25 +02:00

editorGeoMap.hpp

feat(editor): a map of Poland to pick a place on, shared by the scenery wizard and the terrain model

2026-10-21 13:20:25 +02:00

editorGeometry.hpp

refactor(editor): the helpers repeated over the editor files are shared

2026-10-21 10:28:42 +02:00

editorGroundFollow.cpp

feat(editor): the track laid on the terrain gets its grade line from the profile solver

2026-10-21 13:20:47 +02:00

editorGroundFollow.hpp

feat(editor): the track laid on the terrain gets its grade line from the profile solver

2026-10-21 13:20:47 +02:00

editorGroundMesh.hpp

Editor terrain: texture browser, undo, conversion from terrain files

2026-10-09 23:39:26 +02:00

editorHttp.cpp

feat(editor): heightmap terrain from the terrain model of GUGiK, fitted to the tracks of the scenery

2026-10-18 12:56:25 +02:00

editorHttp.hpp

feat(editor): heightmap terrain from the terrain model of GUGiK, fitted to the tracks of the scenery

2026-10-18 12:56:25 +02:00

editorIcons.cpp

feat(editor): icons over the 3d view: the tools of the field of work along its left edge (the edit modes of the surroundings, the track tools, the road tools with the lanes, the terrain tools with the orthophoto), the modes of the gizmo at its top, the axes of the world as the camera sees them in its top right corner, a click on one looking along it, with the top view under them; the icons drawn by editor/icons/editor_icons.py into a png which CMake writes out as an array built into the executable; the gizmo modes and the top view left out of the toolbar; Polish translation

2026-10-09 11:54:47 +02:00

editorIcons.hpp

feat(editor): the parallel track is a tool of its own (N) in the toolbar, its green preview only shows there, Shift+click on a straight in L opens it with that track; the norms are two buttons at the top of the Lay panel and of the Curve tool, shared by both, free hides the recommendations of the curve and its norm warnings, the duplicate transitions checkbox is gone; the Lay panel starts with the radius, the speed and the shape; the Tracks toolbar shows the tools that lay track, the ones that correct a line are under More (remembered); First steps ends with driving the track laid; self-test command tracktab

2026-10-12 01:52:28 +02:00

editorIncludeInfo.cpp

refactor(editor): the helpers repeated over the editor files are shared

2026-10-21 10:28:42 +02:00

editorIncludeInfo.hpp

refactor(editor): the helpers repeated over the editor files are shared

2026-10-21 10:28:42 +02:00

editorInfra.cpp

feat(editor): labels for a layman, light at the start; whole sceneries fitted to the terrain model

2026-10-19 15:27:50 +02:00

editorInfra.hpp

feat(editor): labels for a layman, light at the start; whole sceneries fitted to the terrain model

2026-10-19 15:27:50 +02:00

editorModelSets.cpp

feat(editor): user-defined model sets, random insert from set, tabbed editor panel

2026-10-01 18:41:35 +02:00

editorModelSets.hpp

feat(editor): user-defined model sets, random insert from set, tabbed editor panel

2026-10-01 18:41:35 +02:00

editorNmt.cpp

feat(editor): the terrain model asks again for what it didn't get, can be stopped and says when the place is outside Poland

2026-10-21 13:20:20 +02:00

editorNmt.hpp

feat(editor): the terrain model asks again for what it didn't get, can be stopped and says when the place is outside Poland

2026-10-21 13:20:20 +02:00

editorOrthophoto.cpp

feat(editor): heightmap terrain from the terrain model of GUGiK, fitted to the tracks of the scenery

2026-10-18 12:56:25 +02:00

editorOrthophoto.hpp

feat(editor): Straight and Curve are one Plan tool (G, also C) right after Lay track, a straight opens with its grips, a curve or a line with its vertices; digits no longer type a length while extending from a free end; the scenery wizard chooses realistic or fictional, a realistic one gets //$g and //$o and opens with the orthophoto in the top view, a fictional one only the top view with the grid; the orthophoto settings are kept in the scenery as //$o (on, year, opacity, radius, height, drape, lift, hires, scene, origin) and survive the new formats; self-test command mapstate

2026-10-12 02:21:29 +02:00

editorPreviews.cpp

feat(editor): fields of work in a row of their own over the toolbar (surroundings, tracks, roads, terrain), twice as high, with bigger bold text, and the tools of the one chosen in the toolbar under it: the edit modes of the node bank, the track tools in groups with the vehicle and the structure gauge, the road tools with what the place tool puts, the terrain tools (sculpt, smooth, chunks, orthophoto); the tool options window keeps the settings of the tool; the node bank shows a big preview of the entry pointed at for a moment, with its model and skin; the green colours by default again; Polish translation

2026-10-09 00:42:17 +02:00

editorPreviews.hpp

feat(editor): fields of work in a row of their own over the toolbar (surroundings, tracks, roads, terrain), twice as high, with bigger bold text, and the tools of the one chosen in the toolbar under it: the edit modes of the node bank, the track tools in groups with the vehicle and the structure gauge, the road tools with what the place tool puts, the terrain tools (sculpt, smooth, chunks, orthophoto); the tool options window keeps the settings of the tool; the node bank shows a big preview of the entry pointed at for a moment, with its model and skin; the green colours by default again; Polish translation

2026-10-09 00:42:17 +02:00

editorProfile.cpp

fix(editor): guard the places where the editor could crash outright

2026-10-21 08:42:29 +02:00

editorProfile.hpp

feat(editor): labels for a layman, light at the start; whole sceneries fitted to the terrain model

2026-10-19 15:27:50 +02:00

editorRoad.cpp

fix(editor): guard the places where the editor could crash outright

2026-10-21 08:42:29 +02:00

editorRoad.hpp

feat(roads): lanes change within a road piece (lanesto), junctions of two roads from earlier sceneries are loaded as such pieces and saved as roads; the editor leads the lanes of neighbouring pieces with them

2026-10-04 05:00:52 +02:00

editorSettings.cpp

feat(editor): the top view of the tracks draws the terrain to the corners of the screen, the ballast optional

2026-10-19 17:10:27 +02:00

editorSettings.hpp

feat(editor): the top view of the tracks draws the terrain to the corners of the screen, the ballast optional

2026-10-19 17:10:27 +02:00

editorSpeed.cpp

feat(editor): labels for a layman, light at the start; whole sceneries fitted to the terrain model

2026-10-19 15:27:50 +02:00

editorSpeed.hpp

feat(tracks): speed check of the paths against the speed their geometry allows: radius and cant, cant ramps, curves without transitions, switch branches

2026-10-05 01:21:11 +02:00

editorSwitchDesign.cpp

fix(editor): guard the places where the editor could crash outright

2026-10-21 08:42:29 +02:00

editorSwitchDesign.hpp

feat(track): 3D sleepers and switch timbers, blade heel and throw from templates, one rail carving pass

2026-10-17 23:32:43 +02:00

editorSwitchStore.cpp

fix(editor): guard the places where the editor could crash outright

2026-10-21 08:42:29 +02:00

editorSwitchStore.hpp

feat(editor): labels for a layman, light at the start; whole sceneries fitted to the terrain model

2026-10-19 15:27:50 +02:00

editorTerrain.cpp

Heightmap terrain: .tch chunk packs, streaming with LOD, terrain painting, water and modifiers - terrain/<name>/terrain.yaml + <px>_<pz>.tch packs of 16x16 chunks (250 m, 0.5/1/2/5 m spacing), slices with crc-32 and optional zstd (vendored zstd 1.5.6 in ref/zstd) - heightmap_terrain [name] endheightmap_terrain directive replaces editorterrain - streamer: worker threads, camera + look-ahead loading, geomipmap LOD with skirts, pooled geometry - mat_terrain shader: up to 8 painted layer materials per chunk via texture arrays (opengl33); other renderers fall back to the dominant material - water bodies (outline + level), terrain modifiers (vertical profile shaping kept non-destructive) - F11 Terrain work mode rebuilt: chunks, sculpt, smooth, paint, point spacing, water tools

2026-10-09 21:02:25 +02:00

editorTerrain.hpp

Heightmap terrain: .tch chunk packs, streaming with LOD, terrain painting, water and modifiers - terrain/<name>/terrain.yaml + <px>_<pz>.tch packs of 16x16 chunks (250 m, 0.5/1/2/5 m spacing), slices with crc-32 and optional zstd (vendored zstd 1.5.6 in ref/zstd) - heightmap_terrain [name] endheightmap_terrain directive replaces editorterrain - streamer: worker threads, camera + look-ahead loading, geomipmap LOD with skirts, pooled geometry - mat_terrain shader: up to 8 painted layer materials per chunk via texture arrays (opengl33); other renderers fall back to the dominant material - water bodies (outline + level), terrain modifiers (vertical profile shaping kept non-destructive) - F11 Terrain work mode rebuilt: chunks, sculpt, smooth, paint, point spacing, water tools

2026-10-09 21:02:25 +02:00

editorTerrainStreamer.cpp

fix(editor): guard the places where the editor could crash outright

2026-10-21 08:42:29 +02:00

editorTerrainStreamer.hpp

fix(editor): guard the places where the editor could crash outright

2026-10-21 08:42:29 +02:00

editorTrack.cpp

fix(editor): a point taken out of a grade line leaves its neighbours with the radius of the limits, and paths meeting at a sharp break keep their own grades

2026-10-21 17:25:17 +02:00

editorTrack.hpp

feat(editor): the terrain model loads from a clearer panel and follows the tracks edited

2026-10-21 13:20:39 +02:00

editorTrackShape.cpp

fix(editor): an arc and a straight laid to a point on the circle of the radius aren't refused

2026-10-21 13:20:47 +02:00