mirror of
https://github.com/MaSzyna-EU07/maszyna.git
synced 2026-11-19 22:44:59 +01:00
* feat(track): the rail code split by concern, the blades of the switches with the key frogs shaped from their templates The rails are laid by code of their own instead of inside Track.cpp: gauge lines (GaugeLine), knot lines (Knots.h), crossings and check rails (RailCrossings), rail materials (RailMaterials), measuring the rail profile (RailProfile), planning the cuts (RailPlan), the carving scan (RailCarve) and laying the geometry (RailLayer). A switch with the key frogs draws its blades from the tip where their planed nose ends to the heel, bent as they're thrown, and the rail behind them from the heel on, where they were laid from the start of the switch before; on a switch of the catalogue they start at the cut tip of the tables, 1.248 m from the joint at R 190, 1.5 m at R 300 (track_features::blades). The frogs cut from the rails, the wing and the check rails are built but switched off (track_features::crossings), the rails laid whole as before. The switches without the key keep the blades they had. A switch path can be a chain of pieces: pieces1 and pieces2 keep the parts of each path after the classic bezier, which stays as the approximation older versions read. A path with its radius given is a curve however gently it bends, a plain track a straight only where both of its control vectors lie along it. A vehicle trailing through a switch with a movable nose set the other way runs off the rails at it (TRAILED_SWITCH). * feat(render): the shared treads of the rails and their cut faces drawn, the cut faces in the matte variants of the rail materials Both renderers draw the treads a track shares with the rails it crosses, in the pick pass too, and a pass of their own for the faces where the rails are cut, the ends of the blades among them, in the matte variants of the rail materials, so the cut faces don't shine like the head the wheels polish. * feat(vehicle): an axle on a switch keeps to the path it came on, and coming from the frog end trails the switch through where the wheels reach the blades The switch thrown under an axle no longer moves it over onto the other path; it runs on along the one it entered. Coming from the frog end, where the blades are shaped or the frog has a movable nose, the switch set the other way is trailed through (rozprucie) only where the wheels get to the blades or to the nose, not as the axle enters the track; the other switches are trailed through as it enters, as before. * fix(track): the tracks drawn straight before, which their second control vector bends now, written to the log The simulator told a straight by the first control vector of a path alone, so a track whose second control vector bent it was drawn straight; now it's a curve. Such a track is named in the log as it loads, so a scenery made counting on the straight can be found: 25 tracks of lk357. Paths with both control vectors along them bend a centimetre or so at most and aren't named. * feat(track): 3D sleepers and switch timbers laid where the simulator makes the ballast, switched off in the build The sleepers of a track running alone are laid square to it, the timbers of the switches and crossings across the tracks running over them, shared by them, of the models set with sleepers3d and sleepers3dplain in eu07.ini; sleepers3dbed tells whether the ballast is laid under them too, lowered so they stick out of it. The layout of a cluster of tracks is worked out once and kept till a track of it changes, in a thread of its own while the simulation runs. timbermodel of a track, read and written back before, takes the place of the model of sleepers3d there. All of it is off whatever eu07.ini sets (track_features::sleepers), the tracks keeping their ballast and their sleeper models. * feat(render): the 3D sleepers and switch timbers drawn in instanced batches Render_Timbers lays the beams of the tracks in range where they're out of date and draws those of a run of tracks of a cell gathered by the model and its part or its level of detail, in as few instanced batches as they fit in; in the shadow pass only those near the camera. A track with them leaves its old sleeper model out. OpenGL 3.3 renderer only. * fix(track): the counts of what's wrong with the sleepers kept safe from the thread laying them, and that thread stopped before what it works with goes The counts of the beams clipped, dropped and off the plane, of the slowest and the biggest cluster, are counted by the thread working out the layouts in the background as well as by the simulation laying a cluster itself, and were plain values written by both; they're atomic now. What the thread keeps the clusters in, their version and the counts were made after the worker, as it first asked for them, and so destroyed before it at the exit while its thread could still be laying a cluster; they're made first now, the worker stopping and joining its thread before they go. The tracks go with the paths of the simulation, made before the worker. * revert(track): a tributary and a track of an unknown type load as before They came in with the rail code from the guards of the editor against crashing, and don't belong with the blades: a track of an unknown type loaded as a normal track of the railway could be joined to it and run on, and a tributary loaded as a river with its first path lost the second one when the editor saved the scenery. Both load as on master again; the place where the editor crashed on them is to be guarded where it is. * fix(track): the tracks drawn straight before named in the log once, as they load, and the paths of the switches with no radius told a straight as before in one term The log of the tracks the second control vector bends now was written each time the segments of a track were made again, as a track with its unevenness loads and as the editor changes or drags a track; it's written only the first time, as the track loads. The paths of a switch or a crossing with no radius keep the rule of master, a straight told by the first control vector alone, its two terms being the same length; they're one term now, with the comment saying so. * fix(track): the thread laying the sleepers stopped as the application exits, and loading no models itself The thread reads the scenery, which the application deletes as it exits well before the statics go: it's stopped and joined first thing in exit() now, the worker destroyed with the statics only where the application exits some other way, and not started again after. The models the beams are made of were loaded by the thread where it didn't find them, through the renderer, out of the thread of the renderer, into a map read by the simulation meanwhile: they're found under a lock now and loaded only by the threads other than it, again for all the tracks whenever a track changed since, before a layout is asked of it. With the 3D sleepers off in the build their settings aren't exported, and a track changed doesn't look for the tracks around to lay their beams again. * feat(track): the 3D sleepers turned on with sleepers3d in eu07.ini, no longer switched off in the build track_features::sleepers is gone: sleepers3d <model> in eu07.ini lays them, none (the default) lays nothing and the tracks keep their ballast, as before. The sleepers3d settings are written back with the others. The editor changes the tracks, so while it's open their sleepers are worked out on the main thread as they're needed, not in the background. * fix(render): only the part of a timber model drawn, not what else the model holds A timber model of parts may hold more than its begin, main and end, as the kits with the fastenings of the rails do. Those were drawn with each part of each timber, in the middle of the track; they aren't laid, so they're skipped now. * fix(track): the 3D sleepers laid only for a renderer which draws them Only the OpenGL 3.3 renderer draws the beams. With another one a track set to them lost its ballast to them, lowered or not laid at all with sleepers3dbed no, and nothing was drawn in its place. Draws_Timbers() of the renderer tells now, and where it's false the tracks keep their ballast, as with sleepers3d none. * fix(render): the submodels of a timber model left as they were after its parts are drawn They were all made visible after a part was drawn, the ones the model hides itself too, like Light_On, while the same model may stand in the scenery. The submodels of the top level besides the parts are listed as the model is loaded, hidden while a part is drawn and given back their own visibility after. The parts have to be at the top level of the model for that; a model with them deeper is logged and drawn whole. Render_Timbers no longer looks the model up under the lock for every run of tracks, the name set is enough there. * fix(render): a vertex whose faces give its texture no direction gets a tangent across its normal, not a NaN one The cut ends of the rails have one spot of the texture on all their corners, so their tangent came out of normalize() as NaN. The normal-mapped shaders then shaded them with a NaN normal: about half of the vertices of the cuts and frogs, and the end faces of the rails. * feat(track): the frogs cut from the rails turned on with frogs in eu07.ini, no longer switched off in the build frogs yes cuts the rails of the plain tracks and of the switches with the key frogs where they cross other rails, into frogs, wing rails and check rails. It's off by default: the rails are laid whole as before, the blades of the switches with the key are shaped still. * refactor(editor): the track mode file split into the files of its tools, the code as it was A pure move, so that the commits after it show what changes in each tool rather than a 4800-line file rewritten. The member functions of editor_mode go to the file the editor of this branch has them in: route, straights, lay, switchplace, switchdrive, switchtool, trackgizmo, and the rest stays in editormodetrack.cpp. The helpers of its anonymous namespace go to editormodetrackshared.h, as they were but inline, in namespace track_mode, which the files use. No line of code changes; the files add only their license, includes and the using line. * feat(editor): the groundwork the tools of the editor share - The tool interface (editortool.h), the gestures of the mouse (editorgestures.h) and what the modes share (editormodeshared.h); the projection, viewport, selection and texture picking taking them up. - Scripted input (scriptedinput): the input of a selftest script fed to the editor as if typed and clicked, the real mouse and keyboard ignored meanwhile; EU07_EDITOR_SELFTEST_HIDDEN draws into a window never shown nor focused. - The ui layers and panels of the editor, its settings, icons and the info of the includes; the layers of the scenery and their saving; the launcher mode. - utilities: user_cache_path (the cache folder of the system for the user) and the helpers of the translations. - stb_image: the gif loader takes the frame two back from the frames it decoded, not from before its buffer. - tools/editor: the scripts making the headers of the drives, the turntables, the editor and its usage. - Unit tests: test_area and the stubs of the editor the tests link. Not built on its own: the tree builds again with the selftests commit, the one before the translation. * feat(editor): the tracks laid along an alignment, to the PKP PLK norms, with their grade line and the ground - The alignment of the laying (editorAlignment, editorAlignmentStore): straights, transition curves and arcs with the cant of the norms for the speed, the radius below the minimum for it a warning; the lay, route and straights tools build on it, the route plan reading the curves going on from the tracks adjoining. - The grade line (editorProfile, the profile and gradeline tools): fitted to the terrain model or edited by hand, the tracks fitted marked in the scenery (//$f), the shared grade lines of nearly parallel tracks (//$n). - The ground under the tracks (editorGroundFollow, trackbed): the terrain drawn to the tracks and restored, the tracks put onto the terrain. - Connections between tracks (editorConnections, the connection and connection curve tools), the track presets, the shape of a track (editorTrackShape), digitizing tracks from the orthophoto, the properties sheet of the tracks (trackprops) and the track ux. - Unit tests: alignment, ground fit, heights, with the data of two fits. Not built on its own: the tree builds again with the selftests commit, the one before the translation. * feat(editor): the switches placed, slid and designed from their templates - The switch templates (editorSwitchStore, the template tool): the catalogue switches and the user's own, kept with the settings; the designer (editorSwitchDesign) with a drawing of the dimensions, a and b typed in with the shape making up the rest, a switch clicked off the orthophoto. - The curve of a switch laid into a curve (editorSwitchCurve), placement on a straight or into a curve, slide along it, crossovers and double slips (switchplace, switchslide), the drives of the switches (switchdrive) and the records of the switches placed (records). - Unit tests: test_switch_curve. Not built on its own: the tree builds again with the selftests commit, the one before the translation. * feat(editor): the tools of the infrastructure beside the tracks The gauge, speed, joints, lineside, parallel tracks, vehicles, signals, turntables, sweep and road tools with headers of their own; the kilometrage of the lines (editorKilometrage, the km tool); the infrastructure, roads and speeds behind them (editorInfra, editorRoad, editorSpeed). Not built on its own: the tree builds again with the selftests commit, the one before the translation. * feat(editor): the terrain model of geoportal.gov.pl and the orthophoto downloaded for the editor - editorNmt: the squares of the terrain model at 1 m (NMT GRID1, the WCS service of geoportal.gov.pl) fetched by two workers, kept in editor/cache/nmt/grid1 of the game folder, the heights of the scenery taken from them; the nmt mode loads it along the tracks or around the camera. - editorHttp: the HTTP client of both, WinHTTP on Windows, libcurl elsewhere where it's built with it; without it the caches only. - The orthophoto: its cache moved to the cache folder of the system for the user, the download area a polygon on the topo map (//$a) filled in the background, the 4K imagery, the tiles waiting outlined on the ground. - editorGeoMap: the topo map of the top view; heightmapterrain and the terrain streamer grow the terrain made from the model around the camera. Not built on its own: the tree builds again with the selftests commit, the one before the translation. * feat(launcher): the scenery wizard picks the place of a new scenery on the topo map the editor shares The wizard drops its own map download and decoding for the topo map widget of the editor (editorGeoMap). The place clicked becomes the geographic reference of the new scenery (//$g PUWG1992), and the scenery starts with the orthophoto of the editor on (//$o), lying under it in place. Not built on its own: the tree builds again with the selftests commit, the one before the translation. * feat(editor): the tools wired into the editor mode and the build editor_mode takes the tools of the commits before: its header declares them, editormode.cpp and the track mode drive them, and the renderers draw their overlays (opengl33 and legacy). CMakeLists lists the new sources and adds WITH_EDITOR_SELFTESTS (off by default); the unit tests build the new test files. Not built on its own: the tree builds again with the selftests commit, the one before the translation. * feat(editor): the selftests of the editor split by what they test The scripts of EU07_EDITOR_SELFTEST run the commands of editormodeselftest*.cpp: scene, track, rails, join, switch, signal, sleepers, sweep, terrain, monkey. The code is in every build; only with WITH_EDITOR_SELFTESTS=ON does the editor read the variables and run a script. The selftests of master now need the option too. The tree builds again with this commit. * feat(editor): the Polish texts of the editor, all of them in one update of editor_pl.po * fix(editor): the marks of the editor moved off the letters the starters read, and its lines told by their words The starters read some letters in a scenery file: the Starter the title //$n, the attachments //$f and the old scenery //$a, StarterNG and the launcher of the game the attachments //$f and the title //$n. The editor wrote its download area, shared grade lines and fitted tracks under them, and took every line of those marks as its own: saved, a scenery lost its title and attachments, and the starters showed the lines of the editor as them. - The download area is //$z, the shared grade lines //$w, the fitted tracks //$t. - Their lines and those of //$o are told by their first words, as //$h, //$r and //$k were: //$o only as "on 0" or "on 1", the origin or the settings of older builds after it, so a trainset described as "on ..." isn't taken. - The lines older builds wrote under //$a, //$n and //$f are read only by the words the editor wrote in them, or by its own comment line before them, under the new mark. Each save writes them again with it, also when the editor didn't change them; the lines of the starters stay. * fix(editor): a square of the terrain model cut short isn't read, and the squares are kept in the user's cache The service puts the directory of its GeoTIFF before the pixels, so a file cut short by a write or a fetch broken off was read whole, the pixels missing coming out as heights of 0 m, for good. - The reader (editorGeoTiff.hpp, with unit tests) wants all the strips the rows need, each within the file. - A square is written under a name of its own and renamed. - The squares are kept in the user's cache folder (nmt/grid1), as the orthophoto, since the game folder may not be writable; without one, in the game folder as before. The ones older builds kept there are moved over as each is asked for, a damaged one deleted. - Capabilities that didn't come aren't kept as the fallback name for the session: the next square asks again. * chore(editor): the http client said to serve the terrain model and the topo map too, the gif fix of stb_image marked local - CMake names the orthophoto, the terrain model and the topo map as what goes without libcurl. - The fix of the gif frame two back in stb_image is ours, not upstream's (v2.30 still has the old line): a comment at the line says so, for an update of stb_image to keep it. * fix(editor): the lines moved off the letters of the starters in a merged layer written once, not again with each save A merged layer's text goes into the file of its target on save, and the target is read again; the marked lines of the merged layer were dropped only for the marks the editor had changed. The lines moved to the new letters stayed with their old places, and the next save of the session wrote them into the target once more. - After a save, the marked lines of every merged layer are dropped; those of its target are read again from its file. - The lines of a dead layer aren't written again. - The selftest layermerge merges the layer of one file into another's, as the layers panel does. * feat(editor): the station as the signalling sees it, found from a switch of it, and its schematic editorStation: the switches joined by plain track no longer than 1.5 km, the tracks between them and the lines leading out, 400 m of each beyond the outermost switch; laid out as a schematic along the main track through the station. The track circuits, the signals and their lights, the lengths of the station tracks and the lines to the next stations are worked out from it for the signalling tool. Nothing uses it yet: the signalling tool, wired in the next commit, does. It builds on its own. * feat(editor): the signalling of a station in the Signalling tab, laid out from a switch of it as on the lines of PKP PLK LMB on a switch in the Signalling tab opens its station: the schematic in a window of its own, the name, the code, the line and the km of the station, and the steps of its signalling, each one step of undo: - the switches numbered along the station after its code, bpd_1, the parts of a slip bpd_15a..d; the drives and the objects naming a switch follow it, events written by hand keep the old names; - the tracks cut at the joints of the track circuits, Ie-4, and the circuits named, bpd_iz1, bpd_it1; - the entry, exit and shunting signals placed and named, A, F1, Tm1, from the templates chosen; - the signals of the lines out: the automatic block of three or four aspects, the block sections no shorter than the braking distance, or the semi-automatic one with a warning disc; block boundaries drawn by hand; - the lights each signal needs for its routes, Ie-1 and Ie-4 § 8, its template fitted to them; - the SHP track resonators the signals lack, rezonator.inc; - the lengths of the station tracks as a table, and what the station and its lines still lack, with Repair. The stations described are kept as //$s lines in the files of their layers. * fix(editor): the signals of a station and of its lines not placed with no template for a kind, no track cut for them first - Set the signals and Set the line signals cut the tracks first, and only then found no template for a kind. They stopped there, but the cuts stayed as a step of undo. Now they ask for the templates first, by the lookup signal_batch() uses (signal_template_for(), behind editor_signals::signal_templates_missing()). Without one nothing is cut. - Set the signals and Set the track circuits again under Track lengths had the ids of the buttons of the steps above them. ImGui flagged them when hovered. Each now has an id of its own. * fix(utilities): win1250_to_utf8 turns the polish letters into utf-8, not into themselves utilities.cpp starts with a byte order mark, so the compiler reads it as utf-8. The game's targets don't get /utf-8, though: set_target_properties(... COMPILE_OPTIONS ...) in the MSVC block of CMakeLists.txt replaces the options add_compile_options gave them. So the string literals went into the program in the code page of the system, windows-1250 on a polish one, and the map of win1250_to_utf8 turned each letter into itself. What read windows-1250 through it got no utf-8: the names, descriptions and categories of the sceneries and the names of the textures in the launcher, and the descriptions of the templates in the editor. The editor writes such a description back through utf8_to_win1250, which makes a question mark of each byte that doesn't start a utf-8 sequence, so the letters it had read unchanged didn't come back. The utf-8 sequences are written as bytes now, the way utf8_to_win1250 has them, so they don't depend on the options. The options stay as they are: with /utf-8 other literals of the files with a byte order mark would change, the "±" of the table of Bezogonkow would take two bytes and move the letters after it. The unit tests check the letters and that the text given is valid utf-8. (cherry picked from commit9ffed96ec1) * fix(editor): the switches renamed only after the events by their old names are shown, the station records in windows-1250 and in the file the scenery had Number the switches renames the switches and what the editor writes along with them, but not the events written by hand: a switch event aiming at a switch, or <name>:event0 and the others named after it, would keep the old name and lose its switch. Now the first click lists them in the status, up to six and how many more, and renames nothing. A second click with the same renames goes ahead. The name of a station is written in windows-1250, like the rest of the scenery file. A name read that isn't valid utf-8 is taken for windows-1250; the utf-8 the earlier builds wrote is read as it is. utf8_to_win1250 moves from editorIncludeInfo.cpp to the utilities, beside win1250_to_utf8, and the unit tests check both ways. The record of a station that had none goes beside the records of the other stations, in the file marked with them, so a scenery saved under another name keeps them in one file. output_layer takes, after <scenery>_<part>.scm, an included file of the part of another name, the one of the scenery it was copied from, before it makes a new one. The comments: the joints of the track circuits stand 4.2 m beyond the fouling points, where the axes are 3.5 m apart, as joints() counts them; the regulation of the lengths is cited with its date and title. * fix(editor): a scenery saved under another name keeps one file of the keys by the movable noses, not the old one beside its own The editor writes the keys by the movable noses on each save to <scenery>_dzioby.scm and includes it. A copy of a scenery, saved under another name, still included the file of the scenery it came from, and its save wrote a file of its own and included it too, so each key stood twice. Now the save leaves out of the scenery the other files of such keys it includes, told by the line the editor writes at their start. Their files stay on the disk, for the scenery they were made for. A file made by hand, without that line, stays included. The turntable controls had the same, fixed the same way on their own. * fix(editor): a file of the scenery named like a part of a tool isn't taken for the one the tool made output_layer took, after <scenery>_<part>.scm, any included file named *_<part>.scm, so that a scenery saved under another name goes on with the file of the scenery it was copied from. A file of the scenery named alike, written by hand, such as rejon_teren.scm, got the terrain directive, the hectometre posts or the new signals too. The files output_layer makes start with a line of their own now, "// scenery layer created in the editor for its <part> part", and a file of another name is taken only with that line. A layer gets it through the new parameter of scene::node_layers::create(); the others start with the general line as before. <scenery>_<part>.scm of the scenery itself is taken without the line, as it was. A file made for a part by an earlier build has only the general line, so a copy saved from it gets a file of its own. * feat(editor): a player of GIF clips for the windows of the editor editor_clips::clip plays a GIF in an ImGui window, looped, from the time given. stb_image decodes the whole file on a thread of its own, so the window isn't held up; until then the clip says it's loading. The frames are kept as stb_image decoded them, and the one shown is a texture of the ImGui renderer (Create_Image), made again only when the frame changes. A file that isn't there is told missing at once, with no thread started. Nothing uses it yet; the tutorial of the next commit shows its clips with it. * feat(editor): Help > Tutorial, fifteen short lessons of the editor The lessons: looking around, laying track, curves, the radius of the curves at the bends, correcting a curve, joining tracks, switches, switch templates, signals and posts, selecting and fixing, editing with the gizmo, the grade line, terrain from the terrain model, sceneries made before, saving and driving. Each lesson has: - in eight lessons, a looping clip from lang/editor_tutorial/<lesson>.gif, played from the start on a click; in six others, a moving drawing (the radius at a bend, a switch template clicked, the signals, the grade line, the terrain, a trainset); - the mouse buttons and keys drawn as pictures beside what they do; - ticks that fill in as the user does it, told by the tools through editor_guide::first_step_done(); - a button that turns the tool of the lesson on; - Back / Next and a dot per lesson, green when the lesson is done. The window follows the work: when the tool in use changes, it turns to the first lesson of that tool not done yet, and a page turned by hand stays until then. In a lesson of laying it warns when there's no ground under the cursor. Where it opens: - by itself when an editor session starts, until "Show when the editor opens" is unticked (first_steps in the editor's settings); - from the Help menu; - from a Tutorial button beside Lay a track in the hint of an empty scenery, which isn't drawn while the tutorial is open; - at its lesson, from a "?" by the radius at the bends in the lay panel. A lesson whose clip isn't there is shown without it; the clips aren't in this commit. editor_guide is a new role of the editor, given to the hekto-post and trainset tools. Selftest command tutorial <page>: opens the tutorial at a lesson, from 0; -1 closes it. * fix(editor): the lessons of the tutorial say what the editor does The lesson texts checked one by one against the tools; the ones that told otherwise: - Switches: a connection isn't chosen at the top of the panel, its kind comes from where the drag is let go (a crossover onto the other track, over a crossover the other way a double one, or scissors where they overlap). - Switches: a ladder leads onto the parallel tracks it's dragged across, let go on the farthest, with the straights up to where they start; it lays no missing tracks. - Terrain: there is no step 3. Step 1 is Location, step 2 is Load around the camera while there are no tracks and Tracks and terrain with its three ways once there are. The rows had the step numbers in the keys column, and 1, 2 and 3 switch the edit modes in the Terrain field. Now the steps show the mouse, the terrain under some tracks only is a row of F3 (the line the terrain panel shows), and the rows that only tell what the fit does have no key. - Sceneries made before: a plain include can be changed; the row lists what can't: an include template (.inc), the binary terrain cache, a file included twice or with parameters, a locked or hidden layer. - Laying: the second Esc drops the points only within 3 s. - The radius at the bends: two transition curves from 6000 m down to 2000 m while they're long enough for the speed, then an arc; a label turns orange where the curve breaks the norms, not because it came out smaller; two transitions meeting read 2xL and R; the labels of each transition curve are on laid tracks, close up. - Signals and posts: the W17 markers go by the selected switch, around the camera or the whole scenery, not along a line. - Selecting and fixing: E lengthens the track, the control vectors bend it. - The gizmo: at a point Q moves the point alone, W turns the whole track about it. The tooltip of Help > Tutorial no longer speaks of clips: the tutorial goes without them. lang/editor_pl.po has the new texts. * fix(editor): the lessons of the tutorial in plain words Every row, goal and warning of the tutorial is said again for someone who has never laid a track, in English and in Polish: - the words of the railway and of the editor are said in everyday ones, or explained where they come: the radius (how big the curve is), the transition curve (the easing into it), the cant (the outer rail raised), the gizmo (handles on the track), the control vectors (points that bend it), the grade line (how the line goes up and down), the terrain model (the real ground), the orthophoto (the aerial photo), the hectometre posts (every 100 m), W17 (how far a wagon may stand); - what only a designer needs is left out: the 6000 and 2000 m of the radius ladder, the compound curve, the hump, the kinds of include that can't be changed; - the buttons are named as the panels name them: Apply to the scenery, Template editor..., the tiles of the switch tool; - the Polish names of three lessons say what they are about ("Uchwyty na torze (gizmo)", "Wzniesienia i spadki", "Prawdziwy teren"). Their English titles stay, the lessons are found by them; - the warning of no ground under the cursor tells what happens to the track; - two captions of the drawings say what they show (the tracks inside a box, posts every 100 m), and in Polish the button of the top view is "Widok z góry (O)", without "ortogonalny". What each row tells of is the same as before. The msgid of the length typed while laying stays, the window of the keys (F1) uses it. * feat(editor): the semaphores and the warning discs chosen by what their descriptions say they show The descriptions of the signal templates can now say what a semaphore shows and what a disc repeats, and the editor reads it: - signal: {arms: 2, aspects: {Sr1: ..., Sr2: ..., Sr3: ..., Sz: ...}, repeats: {stop: ..., vmax: ..., "40": ...}} is kept with the template, the events named for each aspect - the palette shows a template with arms as a semaphore of its arms, with 1 arm / 2 arms and Sz picking the template of the same tile that has them - the signals of SRK take a semaphore whose aspects cover what the signal needs (Sr3 where a speed is reduced, Sz on the main signals), the fewest arms that do it, and say which one does when the placed one hasn't them or has more than it needs - the warning disc before a semaphore is one whose repeats cover stop, the highest speed and 40 km/h when the semaphore shows Sr3; SRK writes no events of the routes, so this only chooses and checks the disc - the linked signal (parameter 7) is read for the role link as well as text - signal_headers.py keeps the keys written by hand in a description (arms, aspects, repeats, the description and the parameters from 6 on) when it writes the guessed ones again - signaltemplates of the self test lists what the templates say and the heads made of them * feat(editor): the shaped discs swapped and set by hand, the warning discs checked by what they repeat The shaped shunting and stop discs (mk1, tzm, z1) are known to the signalling, but it doesn't place them by itself: - a shaped disc chosen in the palette for the shunting or the stop signals is placed by hand only; the signalling of a station takes the light template of the kind there, and says so when there is none - the template of a shunting or a stop signal standing can be swapped for a light or a shaped one of another mount as well (dwarf and mast, not gantry) - a signal whose description lists its aspects shows a button for each under its card: it sets the signal to that aspect in the editor, by the animations, the lights and the submodels its event sets off, the time standing still; nothing of it is saved. TAnimContainer::Finish takes an animation to its end at once, giving the submodel its angles, multi_event::branches tells the events set off when the condition isn't met From the review of the descriptions: - a shaped warning disc standing before a semaphore described is checked by the events it repeats: stop, the highest speed and 40 km/h of a second arm told apart; one which doesn't is offered the disc which does, and Fit swaps it - the disc offered is of the mount of the disc chosen, taken from the template even when it isn't described - 1 arm / 2 arms / Sz of the palette pick the template leaning as the chosen one and most like it by its name - a semaphore described with its arms but not its aspects has Sr1, Sr2 and with a second arm Sr3 - Fit leaves a semaphore having what it needs with its arms, for the events written by hand to the aspects of a second one; the messages of the fitting speak of what the signals need, not of their lights - signal_headers.py warns of a signal map written as a block, whose keys it can't keep * fix(editor): an aspect shown by hand doesn't name a vehicle that may be gone The Show button runs the events of the aspect outside the queue. run() writes the vehicle that set the event off last into the log, and nothing clears that pointer, so a train deleted since would have been read after it was freed. The queue sets the activator anew each time, so it is cleared before the run. * fix(editor): a disc not described is only offered the one that tells, a light stand-in of the mount of the shaped one - A shaped warning disc whose template doesn't say what it repeats may tell all its semaphore shows as well. It is no longer marked as not fitting: the disc described is offered as a hint, and Fit leaves it be. A disc whose template isn't among the scanned, its mount not known, is offered nothing rather than discs of any mount. - A shaped disc chosen for shunting or stop is stood in for by a light template of its own mount first, a dwarf for a dwarf. - The tooltip of the aspect buttons says the trains read the signal as its events set it last, in a run started from the editor too. - The Polish texts of the fitting speak of signals, not semaphores, since it takes the discs too. * refactor: the Sonar remarks on the switch blades taken care of - the big functions of the rails split into helpers with one job each: the carving, the laying and the planning of the rails, their crossings, the blades, the lofted spans of a segment, the profile of a rail measured piece by piece, the joining of the switches - the floating-point loop counters are while loops doing the same additions, so the samples come out where they did - C arrays are std::array, the two sides of the paths path_sides; the ends of a cut are two parts of one struct, ending and starting - the rail laid by a course of its own, not eleven parameters - the globals kept in functions, the nested ternaries taken apart, one declaration per statement, explicit captures, ranges algorithms, std::format, std::numbers, emplace_back, structured bindings - the region finds the sections around a point into a list the caller gives, so the search for the rails around a track shares no list with another thread - check_rails and create_track_rail_profile are const, the pool of the reused chunks can't be copied The geometry of every chunk of lk357 and td_fog, with the frogs on and off, comes out the same as before. * refactor: the Sonar remarks on the 3D sleepers taken care of - the big functions of the sleepers split into helpers with one job each: the clusters and the lines of timbers, the gaps under the rails, the models and their parts, the check of the layout, the drawing of the timbers in instanced batches - the tracks near a track found into a list of their own, the region searched into a list the caller keeps, not the one the region shares with the main thread; the callbacks are templates, not std::function - the layout of a cluster takes a span of its tracks - the globals kept in functions, the parts of a beam int constants, beam_overhang no longer hidden by a field of the same name - scoped_lock, jthread, contains, ranges algorithms, std::format, emplace_back, structured bindings, explicit captures, upper-case literal suffixes, one declaration per statement - the uniform buffer takes a span of bytes * fix(editor): the editor core builds with GCC again - kCrossoverStraights is constexpr, so the connection curve can take it into a constant expression; GCC refused a double that was only const there. - the track_hover alias inside editor_mode dropped: declared after hovered_track had already used the name, it changed what the name meant in the class (-Wchanges-meaning); the definitions name the shared track_hover. - <cstring> included where the rail self-test uses std::memcpy, which MSVC reached through other headers. * refactor: the second round of Sonar remarks on the switch blades - the carve of a throwable part takes the cut before it only where there is one, as only that cut makes it throwable - the splitting of a grooved profile by the floor of its groove moved out of the rail layer into a class of its own, which is given the profile, the size of the rail, the texture of the plates and the side - the rail drawing is made by a const function - the triangles of an ear-clipped outline go in as the arrays they are, the search for a corner within an ear is an any_of, the loop pruning thin corners keeps the count it started with, as it stops at the first - the bytes of the blocks of a texture are taken off the file through its buffer, with no cast of their storage - the log of a carved part takes the tracks around it as a span - the joint length of a switch, a constant, isn't captured, and the directions at the ends of a crossroads are tested in one condition each * refactor: the Sonar remarks on the tutorial - the window of the tutorial in smaller pieces: the steps reached, the lesson followed and its clip, the clip or the sketch of a lesson, its keys and steps, the button under it and the buttons of the pages; the lessons are a table of their own, the button of each kind of lesson picked from a switch - a clip whose delays add up to nothing shows no frame instead of dividing by them - the frames of a clip are decoded by a function of their own, on a thread kept with them and joined once it's done, or as the editor closes, instead of a detached one - the sleepers of the signal sketch counted by a whole number, the texts of the sketches made by std::format, their points kept in std::array, the whole numbers turned into floats where it's meant * fix: the bugs and vulnerabilities Sonar found in the editor core - the loops stepping along a track, a curve or the view count their steps by a whole number and take the station as so many steps from the first, instead of adding a fraction up, which drifts - the self-test of the guard rails keeps the plan of the rails of the track against while it goes through them: the range of the loop was in a plan made for it and gone before the loop began - the generators of the self-tests and of a unit test are seeded on purpose, so a run can be repeated: marked for Sonar as such - the tool writing the descriptions of the templates takes the names out of its tables only where they stay in the data folder * fix: the loops of the signalling stepping by a whole number the places of the block signals along a line and the marks of the chainage under the plan of a station are counted by a whole number and taken as so many steps from the first, instead of adding a fraction up, which drifts; Sonar took the counters of floats for bugs * refactor: the checks of the signal heads and the signal sheet in smaller pieces the remarks Sonar made on the signal descriptions: the warning about a disc on the mount of a signal is worked out by a function of its own, the fit and the aspects of a head, the swap of a template and its aspects in the sheet of a signal are drawn by members of their own, the walk over the events of a signal is a free function instead of a std::function held by a lambda, and the description of an include is read a part at a time; the names of the kinds are kept in a std::array and looked up by the algorithms of ranges, a name is taken as a std::string_view where it is only compared, and the locals named event, which hid the enumerator, are renamed * style: a space after a comma in the join self-test * style: a space after the question mark in the terrain sketch * style: a space after the question mark in the status of the fitting * refactor: the last Sonar remarks on the small fixes the opening of a scenario catches the exception the scenery throws when it can't be read, not any runtime error; the vehicle moved between trainsets keeps its source by a reference to const; the messages of a track of an unknown type and of a tributary are raw string literals; the parser opens a file by a std::filesystem::path, and the log of a file it can't open still names its folder and its name * refactor: the crossings of a track found without casting its const away the radius of a node can be read off a const one: radius_() is const across the nodes, the ones of the tracks and the models marked override, and a const radius() gives the radius worked out already, or works it out anew without keeping it; the helpers finding the crossings of a track only read it and take it const, its own run of rails typed apart from the ones of the tracks it crosses, which the crossings found name; the triangles of a filled outline are pushed as named corners * refactor: the paths around a track sampled without casting its const away the sampling of the paths and the clusters of tracks laid together only read the tracks, so they take and keep them const: the path sampled points at a const track, the tracks near one are found from a const one by its const radius, and a cluster holds const tracks; the shared zones of the timbers no longer cast the const of their track away * fix(editor): the Sonar blocker remarks on the stack, no side effects in the operands of && and ||, no local named final (S912, S1669) Counting the leftover signals, the pieces of a station walk, the places with nothing beside a run and the joints and fouling points logged by the self-tests no longer counts inside a condition; the last span of a straight is named tail. The counts and what they log are the same. * revert(vehicle): an axle on a switch follows the switch as it is set, as before the stack The axle kept to the path it came on, so a switch thrown under a moving train no longer sent the rest of it onto the other branch, and coming from the frog end it trailed shaped blades only where the wheels reached them. That changed the running of every switch in every scenery, and the AI still scans its route by the switch as set. TrkFoll is as on master again, and the trailing point of the blades it used is gone. * revert(track): a path is told a straight by its first control vector alone again, as the sceneries are made for A plain track was drawn bent where its second control vector was off the chord though the first lay along it, and a path with a radius given was never straightened. Tracks of existing sceneries drawn straight before would have been drawn bent, with their length, cant and the models along them. TTrack::straightened is the rule of master, for plain tracks and the paths of switches. The editor keeps a bend dragged with the second control vector, or set by joining the tangents, by moving the first one 2.5 cm off the chord to the side of the bend, past the tolerance, so the track is drawn, saved and read back bent, by older builds too; the second one dragged back along the chord takes the first one back onto it. * feat(track): the switches joined directly to other switches at load told in the log A switch right after another one is joined to it as the sceneries load, where its end was left open before and vehicles came off the track there. Each switch joined so is logged with its place and the number of ends, and the whole number once, so a scenery can be checked for places that run differently now. * fix(editor): a bend kept by lengthening the first control vector, not turning it keep_bent moved the first control vector 2.5 cm sideways, which turned the start tangent: a kink of 0.29 deg on a 15 m track, flagged by the joints check, and against the fixed direction at a switch or a locked track. Now the vector keeps its direction and gets 2.5 cm longer than a third of the chord, which the simulator no longer takes for a straight. It is also applied after an end is moved or snapped, since a new chord or a snap onto a neighbour could bring the vector back within the tolerance. With the second vector back on the chord, the first goes back to a third of it. * fix(track): each switch joined directly to another one logged with both names join_switches counted ends, while one join links both switches, and only the first switch of a pair was named. It now returns the switches joined to, and the log names both of each joint and gives the number of joints. * fix(editor): a path drawn bent is kept bent through every edit, one drawn straight is left as it is The first control vector is made longer past the 2 cm tolerance only where the path was drawn bent before the edit, or where the edit itself sets the second vector: the end of the path moved, its first vector, its second one, a neighbour followed or its grade taken, the controls aligned at a joint, an end snapped. A path drawn straight keeps being straight when its ends move, and the paths of a track that the edit doesn't bend aren't changed. Moving the second vector back along the chord takes the first one back to a third of the chord where it was made longer here. * fix(app): a scenery that can't be opened takes the game back to the launcher whatever the file system throws Catches std::runtime_error again, as master did: invalid_scenery_exception is one of them, and so is what the file system throws while the scenery is opened. * fix(track): the beams worked out in the background don't read the ends a switch is set to The ballast a switch trackbed takes is asked of the tracks joined to its main path, as the trackbed is made at the load, not of the ends the switch is set to now, which change as it's thrown while the thread runs. What the thread reads with no lock against the main thread is written down where it runs, with the two things driving can change: a switch thrown and a turntable turned. * perf(render): the cut faces of a track drawn with nothing put on the heap, a track with none passed over at once * chore(track): the switch drawing the cut faces in the unrolled material read only in the builds with the self-tests * docs(track): the blades flag said to be switched on, and what frogs in eu07.ini changes of it * fix(editor): a response over 64 MB is refused, curl kept to http and https, the address read as UTF-8 The body of a map or of a service the user typed is read into memory up to 64 MB and fails above that, with WinHTTP and with curl. curl follows at most 10 redirects and only to http or https. WinHTTP gets the address widened from UTF-8, so a pasted one with letters past ASCII isn't turned into garbage. * fix(editor): only the orthophoto an older editor kept is deleted from the settings folder, not all its cache The geoportal folder of the old cache is removed, and the cache folder itself only where nothing else is left in it. * fix(editor): the square metre of the outlined area written as its UTF-8 bytes, shown right where /utf-8 doesn't reach * docs(track): why the velocity read for a switch is put back after its segments are made * fix(track): the blade tips and the open ends of a track take the dark of the rail, not the colour of a worn tread No wheel runs over them, so their cut faces aren't drawn as worn: the beige the matte material gives a worn face is left to the cut faces of the frogs. * fix(editor): a neighbour followed or given its grade is bent only where its second vector really changed follow() and follow_grade() write the second vector of a track joined at its end back as it was when the joint didn't turn or keep its grade; a track the simulator draws straight with that vector off the chord was made bent then, though the edit never touched it. Its first vector is lengthened now only where the path was drawn bent or the second vector took another direction or grade. * fix(track): the open ends of a track laid with cuts take the dark of the rail too The rails a frog or a crossing cuts are laid piece by piece; the caps of their pieces at the open ends of the track were drawn worn with the cuts of the frogs. They aren't worn now, as the open ends of the other tracks. * fix(editor): a neighbour drawn straight is bent only where the edit took its second vector off the chord follow_grade() sets the height of the second vector anew on every graded joint, a fraction of a millimetre off the height the scenery has, so a change of the vector bent a track whose second vector stood off the chord sideways already, though the simulator draws it straight. follow() and follow_grade() keep a path drawn straight bent now only where its second vector lay along the chord before the edit and stands off it after; a path drawn bent is kept bent as before. How far the vector stands off the chord is measured in one place, keep_bent() uses it too. * docs(editor): the comment of keep_bent above keep_bent again, not above the measure of the chord * Editor: signal reads kept by the signal, level crossing discs, signals out of the gauge, indicators, the signalling tools split (#307) * fix(editor): the read of a signal stays by it as its track is split, on a switch and when it is moved, and a level crossing disc is placed The trains find a signal by its read, a passive event in a list of the track, and measure the way to the cell it reads along three tracks further at most. The editor let the read drift away from the signal, or put it where trains of another path read it. - A track split in two: a read the trains scan for (a passive event) goes to the piece by the point it reads, whatever its list; before, those of the runs towards the end stayed on the first piece. Five splits left the reads of A, B, C and J on the first piece while the signals stood on the sixth, out of the reach of the trains. The reads of signals placed since the scenery was opened, not bound to an event yet, go to the piece by their signal the same way. - A signal moved off its track jumped back to that track's end once the track was changed: the track had taken it up as its object and measured it again along itself. A moved signal is let go by the track it stood by, and an object of a single point moved off the side of its track no longer follows it. - A switch reads its events to the trains of both its paths. A signal past the frog of a path, where the axes are a gauge apart, is passed by the trains of that path only, so its read goes to the track joined to the far end of the path, in the list of the trains running from the switch onto it or the other way. Before the frog it stays on the switch. Moving the signal across the frog takes the read between the two. - A signal by a switch on the side of its other path stood on that path, in the way of its trains (0.45 m from its axis); it is refused there, placed or moved, with the reason. - The kind crossing of the descriptions (tsosp, tsospn) is known: the level crossing disc is listed in the palette and placed with its read. Checked in the editor on a hidden desktop: five splits of a track with bound and fresh reads, a signal moved to another track and the old one raised, signals placed before and past the frog of a switch on both paths, turned and moved across the frog, saved and opened again with the reads bound, the tracks raised, shifted and bent with the signals following. Unit tests pass. * fix(editor): a split keeps reads far off the path and bound objects up to 30 m by their pieces A read the trains scan for moves to the piece by the point it reads only from event1 and event2, only when it isn't ignored and only when that point is within 50 m of one of the pieces; a read at the station building stays in its list. An object bound by hand keeps its binding as its path moves up to 30 m from it, an adopted one up to 12 m as before. * feat(editor): the tracks that read a signal are drawn and can be picked, flipped or dropped The selected signal shows each read of its _sem_info as a thick band over the reading track, arrows in the way the read is scanned, a line from the foot of the signal and a plate with the list and the track; the hovered one shows them thinner and placing or moving a signal shows where it will be read. The panel lists the reads: each can be turned the other way or removed, "Pick the path" takes a click on a track (with Shift one read more or less) and "By the path it stands by" puts back the read the signal gets when it is placed. Each change is one step of the undo. The self-test gets signalread, signalreadflip, signalreaddrop and signalreaddefault, and the probe lists every read of a signal. * fix(editor): a moved or turned signal keeps the reads picked by hand, and a read set again isn't an undo step Moving a signal, taking it across the track or turning it put back only the read by the track it stands by and dropped the others: those stay on their tracks now, on the other list when the signal is turned. Setting the reads the signal has already says so and adds no step to the undo. Picking a reading track disarms the template, so a click after Esc doesn't place a signal, and the signals are listed again after any change of the history, also once it is full. * feat(editor): a signal is placed out of the gauge of the tracks around it As a signal is placed, moved, taken across or turned, its models are measured against the gauge chosen in the Gauge window along every path near it. One that enters it is taken sideways, away from the axis of the track whose gauge it enters, as deep as it went in and 3 cm more, in the same step of the undo; between two tracks too close for it, it stays where it was put and the status tells which gauge it enters and how deep. A gantry is only measured. The panel of the selected signal tells when it stands in the gauge, with a button to move it out, and the view marks the deepest place. The gauge tool measures any models against the paths around them for it. The self-test places a signal at a given offset and its probe tells the gauge. * fix(editor): a moved signal leaves only the read of the track it stood by, and the gauge is checked on its level The reads a moved signal keeps were all but the first one listed, which is the first track of the scenery having it, not the one the signal stood by: a read picked by hand could go and the track it left could keep it. It is the read of the track it stood by that goes with it now, and turned, eventall1 and eventall2 swap as well. A track more than 2 m above or below the foot doesn't push the signal aside, the status tells the real distance it went, the gauge is measured again when the signal follows a dragged track, and the marker in the view shows only what is up to date. * feat(editor): indicators put on a signal from the panel, they move and go with it The indicators of scenery/pkp/wskazniki described as "category: indicator" are offered under the selected signal, grouped by their sign. One is put in as an include named after the signal, on the srk layer: - a lit one (place: head) under the lowest lamp of the signal, 0.73 m below it and 5 cm ahead of the mast, each next one 0.45 m lower; a dwarf signal is refused, it has no mast for one; - a plate (place: foot) at the foot of the signal, its model has its place by the mast built in. The panel lists the indicators standing by the signal with a Remove button. They are found as the includes whose first parameter is the signal's name, within 1 m of it in plan. When the signal is flipped, turned or moved, they keep their place in its frame, in the same undo step; deleting the signal deletes them too. If the signal and the indicator both define an event, the status says so, since the scenery keeps only one of them. The self-test gets signalindicator and signalindicatordrop, and its signalprobe gives each indicator's height and the height of the lowest lamp. * feat(tools): indicator descriptions and the indicators taken out of the signal templates indicator_headers.py writes //$e descriptions into the LED indicators of scenery/pkp/wskazniki (W19, W20, W21, W24, W26) with the events each shows. It also makes the indicators that were so far only built into the signal templates: - W1 of the warning discs, new, old and with the light strip; - W1 and W18 (new and old) of the block signals; - the I, II and III plates of the repeaters. The plates fixed flat to the mast are moved 4 cm ahead. Their back is 5 cm from the mast's axis, while the mast is 6.1 cm thick and its clamp under them 8.3 cm, so the mast went through the plate, in the templates too. * fix(editor): a signal turned or moved by the gizmo is read and kept out of the gauge, its indicators go with it everywhere The gizmo of an include only rewrote the numbers of a signal. Its read stayed on the event it had, even when the signal was turned to the trains of the other direction. Its indicators stayed behind, its height could be dragged off the ground, and the gauge wasn't checked. Now: - the gizmo moves a signal in the plan only, at the height it has; - while it is dragged, its indicators keep their place by it; - once it is let go, the drag is made again as a move of the signal tool, one step of the history: the read goes to the event of the trains it faces on the path it stands by, and it is taken out of the gauge; - dropped away from every track, it goes back where it stood. The indicators of a signal are found in the scenery now, not in the list the signal tool keeps up only while it is open: - deleted from another tab, the signal takes them with it; - a signal renamed in the node properties gives its new name to them in the same step of the history; - in the station and line batches, a renamed signal renames them, and a removed one removes them; - the binding of objects to tracks puts them on the path reading their signal, not on the one nearest to them, and a signal moved by hand lets go of them too. Also: - a signal on a gantry takes no indicator from the list; - an indicator a signal has already isn't put on it twice; - the signals and their indicators are found in one pass over the includes, the indicators by the name of their signal; - a step of the history with tracks is always one of their edit, so they are taken back with the includes. The self-test gets signalgizmo, which turns and moves a signal as the gizmo does. * fix(tools): indicator_headers.py keeps the files it replaces, writes beside the data on request - An indicator it made, found changed, is put into a tar in editor_backup before it's written again. - --sidecar writes the descriptions of the lit indicators into editor/templates, as the other header scripts do, the files of the game left alone. - The indicators it makes are copies: the signal templates keep their own, and the docstring and the files say so. * fix(editor): a signal moved by the gizmo by another track is read by it, the templates known without the signal tool - At the end of a gizmo move the nearest track takes the signal when it is nearer than its own by more than 0.5 m; a track it was dropped onto, within 1.2 m of its axis, doesn't, so a signal only turned between two tracks or dropped onto one in a switch keeps its own. - The signal templates and indicators are looked for when a signal is renamed or its gizmo shown, so its indicators follow without the signal tool opened first. - A drop refused puts the gizmo and the node properties back where the signal stands. - The indicators follow only once the gizmo made its step, and the ones not changed are left alone: grabbed and let go it changes nothing. * fix(editor): a signal dropped by the gizmo onto a track keeps its own, the gizmo doesn't wait for the template scan - When the nearest path to the drop is within 1.2 m of its axis, the signal keeps its own track, instead of only that path being left out: dropped onto a middle track it no longer goes to the track beyond it. - The gizmo starts the signal template scan without waiting for it, so a rescan with a signal selected doesn't stop the editor; renaming a signal still waits. * feat(editor): the signalling split into Signals, Station, Station signals and Line block The one Signalling tool held the signals placed by hand, the whole wizard of a station and its checks; each is now a tool of its own in the toolbar: - Signals (I): the palette, a signal placed by a track, dragged along it, selected; a click on a switch no longer opens a station. - Station: LMB on a switch lays the station out; its name, code, line, km, speed and braking distance, the numbers of the switches, the track circuits, the number of the selected track, the list of the switches. - Station signals: the signals of the whole station placed at once, the template of each of their kinds (main, shunt) chosen in a table, and below what the signalling lacks: the repairs, the SHP resonators, the track lengths, the signal heads. - Line block: the block of each line, the block boundaries drawn by hand, the line signals, the templates of the block signals and warning discs. The station tools share the open station and its schematic; Station signals and Line block show what the Station tool set for it, the line and the km in red where the line block needs them. The template table replaces the palette in the station tools, so choosing a template there no longer arms placing. Two icons drawn for the new tools, in editor_icons.py too; the png is drawn by the same shapes, Pillow wasn't at hand. The tracktab self-test takes a tool by its name, and srkopen shows the Station tool. * feat(editor): a signal shows its distance from the track axis and to the switch ahead, and goes to 50, 100 m... from it - editor/editorTrackTrace: the track followed the way a train runs, shared by the W17 markers and the signals. The fouling point of a switch (where the axes of its tracks are 3.5 m apart) moved here from the lineside tool, and danger_ahead finds where a train first comes to a switch: the start of one it runs onto from its start, or the fouling point of one it runs onto from behind, which may lie behind the point (a signal in the fouling zone). - The card of the selected signal: its distance from the axis of its track, and along it to the start or the fouling point of the switch ahead, in red when it stands inside the fouling zone. The overlay draws the same as a dimension line beside the track on the side of the signal, with the distance at the place. - Placed, dragged along or moved with the gizmo, a signal goes to a round distance to the switch ahead (50 m steps) when within 2.5 m of one; Alt keeps it where it is. The drag of a new one is measured from where it was pressed. - The fixes of the review of the split: the click label of the station tools in their own branch and a plain select in Signals, the card of a signal picked from the check lists shown in Station signals, and the help texts naming the Templates table and the Signals tool. - Self-tests: signalprobe logs the distance from the axis and to the switch ahead, signal snap=1 snaps as placing does. * feat(editor): the fouling point widened in the curves under 250 m, as the standard of the gauge says Standardy techniczne PKP PLK, tom II (from 2025-07-17), 6.5-6.6: the W17 marker stands where the axes of the tracks are nominally 3.50 m apart; where one of the tracks lies there in a curve under 250 m that spacing grows by the widening of the gauge from its radius (annex 1, table 1), the widenings of both summed when both lie in curves. - editor/editorFouling: the fouling point found along the axes of the main track and the branch, standing on its own: at each point of the branch the spacing wanted is the nominal one plus, for each track, the widening on the side of the other track from its radius there (taken over 5 m each way): 50000/R - 185 mm towards the centre of the curve, 60000/R - 225 mm away from it, none from 250 m up. - gauge::curve_widening gives table 1 of the gauge the editor checks already. - The W17 tool and the distance of a signal to the switch ahead both use it; the card of a signal shows how far apart the axes are at the fouling point, the help of the W17 tool says where the figures come from. - Unit tests: a straight branch at 1:9, a branch in a curve of 300 m (no widening) and of 200 m (outer widening), both tracks in curves (both widenings summed) and a straight branch off a curving track. * feat(editor): the cant leans the cars into the fouling point, and the fixes of the review of the metre - The fouling point takes the cant in, as Ie-1 wants it placed "with the gauge, the cant and the widening in the curves": the cars of a track on a cant lean towards the inside of its curve by D Hi / 1500 (bD of table 1 of the standard of the gauge), so when the other track lies on that side the spacing wanted grows by it, taken at 3.05 m over the rail top, the top of the widest part of GPL-1. The cant of each point comes from the roll of its path as the gauge tool takes it. At any radius, as the table has it; the track leaning away adds nothing. - Below 150 m, where table 1 ends, the widening from the radius is that of 150 m rather than the formula run on. - A switch run onto from behind has its fouling point looked for once its own path is walked too, so one lying on that path is found rather than skipped for a farther switch. - A point behind a signal lies on the track of the farther end of its segment, so a signal snapped back over a joint lands at the round distance rather than at the joint. - Alt keeping a signal off the round distances reads the key from ImGui, which Global.altState misses while ImGui holds the keyboard. The gizmo doesn't snap a signal:a1d10bb0says it does, it's placing and dragging with the tool only. - The help of the distance on the card stays on the distance, the spacing of the axes under it. The unused track_trace::nearest_on is gone. - Unit tests: the cant leaning towards the other track in a curve and at 300 m, nothing when leaning away, and the table ending at 150 m. * fix(editor): the cars lean the way the cant of their track tips them, taken 3.25 m up - The cant along the trace keeps its sign: a roll above 0 lowers the left rail of the path (as the editor lifts its terrain by it), turned to the way the track is walked. A track adds the leaning of its cars to the spacing wanted at the fouling point when the other track lies on the side its lower rail is, whichever way it curves: a branch on a cant against its own curve leans towards the main track on its outer side, whichd70f189cmissed, and a cant on the straight counts too. - The leaning is taken 3.25 m over the rail top, the top of the widest part of the cars, rather than 3.05 m of GPL-1. - Unit tests: a cant against the curve, a cant on the straight, and the leaning away still adding nothing. * fix(editor): the station tools tell by the mouse what a button came to, and the fields of a station read as empty What a button of the Station, Station signals and Line block tools came to was written at the foot of the panel, under the lists, scrolled away: a click which refused for want of the code of the station looked as if nothing happened. It's told now by the mouse which clicked, a refusal in red as the other tools do, and in the status bar. The fields of a station still empty show their examples as such, "e.g. BPd", not as values typed in; the Station tool says above its steps that the code is to be typed first, Station signals that the code and the track circuits are wanted, the code marked there as needed. The check of a warning disc and of a block section went by the braking distance of the station, while Set the line signals places them by the one of their line: on lk357 a disc placed 700 m before Z, the line run at 100 km/h, was marked as standing nearer than the 1000 m of the station. A signal of a line out is checked by the braking distance of its line now. * feat(editor): the joints of the track circuits put, moved and taken away by hand, kept by the station The Station tool gets Edit the joints by hand: LMB on a plain track of the station puts a joint there, LMB on a joint takes it, then on a track moves it, on it again takes it away. The circuits are set again at once, one step of undo each. The joints so changed are kept in the //$s record of the station (joints +x/y/z for one put, -x/y/z for a planned one taken away), so Set the track circuits keeps them; As planned forgets them. The undo step carries the hand joints of the station with the tracks. srkjoint drives it in the self-tests. * feat(editor): the indicators under the lights reordered, a signal set from the axis and raised, standing on the ground by default The indicators under the lights of the selected signal get arrows up and down: one changes places with the indicator above or below it, a plate at the foot keeps its own. One step of undo each. The distance of the selected signal from the axis of its track is typed in the panel, it moves across as far along the track as it stands, the gauge pushing it out again where it comes too near. Its height is set the same way, raised over where it stands by default, over the rail heads on a gantry. A signal is put on the ground by default, the zero of its model 0.38 m under the rail heads: the ground lies 0.35 m under them as Ie-102 draws it (Lx), the foot of the mast stands on the foundation 3 cm over it in the models of pctga, and the sceneries made by hand (Wrzosy, Baltyk) stand their signals 0.20 m under the rail foot so. It stood on the rail heads. signalindicatorswap and signalacross drive it in the self-tests. * fix(editor): the hand joints of a station without a record, of its ends and of another station; a dragged signal keeps its place across and its height - Edit the joints by hand on a station not described yet read the record of index -1: the hand joints are shown only for a station with one. - The joint between the station and a line out of it can't be taken: taken away, the circuit of the switch ran on over the tracks of the line. - A joint held is let go when another station opens, a move by less than half a metre lets it go, and a change no step of the history takes is undone, so the undo knows every change of the joints. - A signal dragged or snapped along its track keeps its distance from the axis and its height over the default, set by hand or standing so before. * fix(editor): a dragged signal carries what it had by its own track; As planned forgets the hand joints that change nothing The distance from the axis and the height of a dragged signal were taken against the track it was dropped onto: dropped on the next piece of its line, on a grade or by a parallel track it came out too far, in the gauge or off the ground. They are taken as it stood by its own track at the start of the drag. As planned clears the hand joints even where the circuits come out the same. * fix(editor): a signal stands as high over the rail heads as its include gives, lowered only where its bottom would hang over the ground The default height of a signal was 0.38 m under the rail heads for every model. It is now read from the description of its include, `//$e signal: {..., height: <m>, depth: <m>}`: height is where the zero of the model stands over the rail heads (by Ie-117 § 15 the top of the foundation of a mast 0.10 m under them, of a dwarf 0.20 m), depth how far the model reaches under its zero. With a depth, a signal whose bottom would hang over the ground, down an embankment, goes down onto it, by at most 3 m (more is taken for a bridge). Without a height the zero stands at the rail heads. "Raised" in the panel, a signal moved across or dragged, all count from that default height. * fix(editor): a signal flipped, given another template or its variant for the other side stays as raised as it was The default height now depends on the template and on the ground under the signal, so keeping the height as it was no longer keeps the raise. Flipped to the other side of the track, the signal is raised over the default there as it was over the default on its own side. Given another template (Swap), or the variant of its template for the other side when moved or placed, it goes up or down by how much the default height of the new template differs from the old one. * fix(editor): As planned forgetting hand joints that change nothing is a step of undo of its own With nothing in the circuits to change no step of the history took the forgotten joints, so they went with no undo for it: Ctrl+Z took back the step before. The anchor of the station as it is now carries them in a step of their own. The signalmove selftest gets its carry indented with the block it is in. * feat(editor): an indicator under the lights goes in its place by Ie-117, from the top W21, W24, W20, W19, W26 Put on a signal, an indicator under its lights was put below the ones there. It now goes in its place by Ie-117 section 12.1 among them, under the last one it doesn't go above, the others (W18 and the rest) below these; the ones under it move a place down, in the same step of undo. * fix(editor): the signal card and the move of a signal keep no pointer across a refresh of the signals - The card of the selected signal went on after "To the other side" or "Turn around" with found pointing into the list of the signals standing, which their refresh had just replaced: the indicators and the gauge of the card read freed memory. It now ends that frame there. - signal_move_to read the mount of the template after the refresh, which may scan the templates again; it is taken before it. signal_place takes a copy of the template given for the same reason. - The fouling test counts its metres with an int, and the search of the middle point of the radius is a while loop (no floating loop counter). * fix(editor): the dimension line to the danger point counts its metres with an int (Sonar S2193) The line drawn by the track from a signal to the switch or fouling point ahead stepped a double by 1 m. It now counts the whole metres with an int from the same first one: the points are the same, since adding 1 to a whole double and adding a whole int to it give the same values. --------- Co-authored-by: maj00r <maj00r@host> * feat(editor): ride the camera along the tracks, and a minimap with stations by their W4 (#317) * feat(editor): the camera rides along the tracks, over the joints and switches and over to the tracks alongside Y puts the camera onto the track under the cursor (or the nearest one), looking along it 3 m over the rails. W/S drive it ahead and back the way the camera looks, Shift and Ctrl faster (20, 60, 250 m/s); A/D take it over to the track alongside, a click to any track; E/Q and the wheel raise and lower it; the mouse looks around as when flying. At a switch entered from its blades it goes straight on, Z picks the turnout for the camera alone: no switch is thrown, no track learns of the ride. The bar over the view shows the track, the km, the speed, the height and the switch ahead. Y or Esc ends it. Self-test commands ride, ridewalk, ridejump, rideahead, rideprobe and rideleave. * feat(editor): a minimap of the tracks with the camera on them, and the stations found by the names of their W4 View / Minimap and stations (W4), Ctrl+M: a window with the rail tracks seen from above, the camera as a triangle the way it looks, the track ridden along in orange and the stops of passenger trains as dots with the names of their stations. It follows the camera, or is dragged and zoomed apart from it; a click takes the camera there, riding along the track onto the track there. Above it the stations the PassengerStopPoint memory cells and events name, searched by a part of the name with or without the polish letters; a click (or Enter for the first found) flies the camera over to the stop looking along the track, riding it rides on from there, each click to the next W4 of the station. Self-test commands minimap, stations, station and minimapclick. * fix(editor): the ride and the minimap after the review, with fewer words on the screen - Ctrl+S, Ctrl+Z and the other shortcuts reach the editor while riding; Esc closes an open popup first - no key stays held when a window takes the keyboard, the place is kept within a path that got shorter, a release of the mouse goes where its press went - the minimap keeps under the vertex limit of a draw list, Enter in the search goes round the stops of the station, the marked station stays marked - the bar of the ride is one line: the track, km, speed and height; the switch ahead under it, the keys only while standing - the minimap in the Map menu, opening over the view, with short texts; the context menu of a track rides along it * feat(editor): the ride drives with the right button held, as the camera flies, and the editor works on along it - W/S, A/D and Q/E drive the ride only with the right button held; without it they're the editor's keys again (Q/W/E the gizmo) - the left button and Esc go to the tools while riding: tracks and objects are laid and selected from where the ride took the camera; Y leaves, a flight of the camera to a framing leaves too - after the review: the help names Ctrl+W/Ctrl+Down as the much faster drive, the stops of the minimap stay within the vertex limit, the search field lets the keys go after Enter * fix(editor): the tools keep their wheel and the menu of a track its click while riding, a pan or the view from above ends the ride --------- Co-authored-by: maj00r <maj00r@host> * feat(editor): signals placed by the editor get a name plate drawn by python (#316) * feat: Elf emergency brake position in the master controller (eu07/maszyna#413) The Elf's master controller (EIMCtrlType 2) gets an optional emergency brake position below its position 0, turned on by the new .fiz key EIMCtrlMainEmergency=Yes in Cntrl (default No, no change without it). With it the old positions move up by one (MCPN 5, neutral at 4): the emergency position brakes fully at once and vents the brake pipe, like the alarm chain or the Impuls's EIMCtrlEmergency. The loader raises a too small MCPN to 5 and logs it. The Elf code with hard-coded positions (CheckEIMIC, the MED full braking, the AI) takes the shift into account. SVN data to change afterwards (dynamic/pkp/elf_v1, needs this exe): - every .fiz with EIMCtrlType=2: EIMCtrlMainEmergency=Yes, MCPN=5, DirChangeMaxPos=4 where present; - the cab .mmd mainctrl entries: offset one notch lower (-0.06 -> -0.09), sounds shifted one index up, new sound0 with 26284_elf_nastawnik_nagle_*.wav. Issue: (eu07/maszyna#413) * fix: Elf emergency brake position vents the pipe only from the driven vehicle, coupled units agree on the controller position The emergency position of the master controller vented the brake pipe from every vehicle whose controller stood there, and "MainCtrl" reached the coupled vehicles raw, so an Elf with EIMCtrlMainEmergency and one without it disagreed by one notch (the full braking of one was the emergency brake of the other, neutral of one a power position of the other). The pipe is now vented only from the vehicle driven from (IsCabMaster()), and the position goes to the coupled vehicles in the positions without the key (MainCtrlPosForCoupled(), the emergency one as the full braking), each adding its own shift on receiving it (MainCtrlPosFromCoupled()). The loader's fix-up for the old MCPN=4 raises DirChangeMaxPos by the same shift, so the reverser keeps working at the new neutral. * feat(editor): the signals the editor places get a plate with their name, drawn by python A signal placed with the signal tool used to get the plate texture of textures/tabl named like it, or none at all. Now, unless a texture is picked, its plate is made by python/local/signal_plate.py: "make:signal_plate?name=<name>", a light plate with a dark edge, four screws and the name in black, the way the plates of textures/tabl look. Renaming the signal in its properties renames a drawn plate with it; a picked texture stays. The templates put the plate after a folder, "tabl/(p6)", so material_data::assign() takes the folder off a skin which names a texture made by a script. * fix(editor): a drawn signal plate keeps following a cleared name, and isn't made for a name it can't carry Clearing the name of a signal in its properties made its plate the drawn plate of no name, which then never followed the name again. A drawn plate now follows any rename to a name, and keeps the last one while the name is cleared. A name with '|', '&' or '?', or one longer than 64 characters, gets no plate (0_nothing) instead of a broken one: '|' splits the skin, '&' and '?' the query of the script, and a very long name made a path too long for the file system when the skin was looked for on the disk. * fix(editor): a signal plate keeps its last name through a name it can't carry, and a plate named by hand stays Renaming a signal to a name its plate can't carry turned the drawn plate into 0_nothing, and it stopped following the name for good. Such a name now leaves the plate with the last usable one, like a cleared name does, and the plate follows again once a usable name is typed. A drawn plate whose name was given by hand, different from the name of the signal, is no longer replaced on a rename: only the drawn plate of the signal's own name follows it. * feat(editor): the drawn signal plates come in three looks, plain, toned and aged The plate drawn by python/local/signal_plate.py looked too clean. It now takes a look in its query, "make:signal_plate?look=toned&name=Tm12": plain is the bright plate it was, toned a greyish field with a little grain and dust towards the bottom and the sides, a thinner edge, smaller screws and graphite letters, aged a darker, grainier and dustier one. Toned is drawn when no look is given. The signal tool picks the look under the plate, kept in the settings of the editor. A rename of the signal in its properties keeps the look of its plate. * perf(editor): the grain and the dust of a drawn signal plate are made on whole images The toned and aged plates shaded their field a pixel at a time in python, about 34 ms a plate with the interpreter held, so a station of a hundred signals in view kept the python queue, and the screens of the cabs, waiting for seconds. The dust is now made once per look, and the grain from random bytes of the name, both put on the field with ImageChops: about 2 ms a plate. The mean colour of the plates stays the same; only the grain falls differently. * fix(editor): the station signalling draws the plates of its signals as their schematic names them The plates the station signalling places and renames say what its schematic shows (Tm3, F1, ToA, a block signal without the stem), and a template swapped in for a signal without a plate draws that text too rather than the small letters of the name. A signal left for removal gets a plate of no text again, not one saying "_old". No plate, 0_nothing, or the texture named like the signal, what the editor gave before the plates were drawn, become the drawn plate when the signal is renamed, in the properties panel as by the station signalling, in the look set in the editor. * fix(editor): a plate of a scenery named like the end of the name of its signal stays through a rename in the properties A texture pzs_a was given by its scenery as a, its real plate: a rename in the properties panel keeps it. Only the station signalling, which looked its plates up that way, takes such a one for its own. * feat(editor): the drawn signal plates are 256 pixels across, sharp up close The edge, the screws and the blur are drawn bigger by as much as the plate is, and the grain is as coarse as before, so the three looks stay as they were. The smallest letters tried grow with the plate too. * feat(editor): a drawn signal plate takes a speed index and the m of shunting signals, typed in the signal tool signal_plate.py draws the speed index after the name, one digit up at its right or two as a fraction across the height of the letters (index=4, index=12 for 1/2), and with m=1 an "m" on a strip of its own under the name, as Ie-1 marks a semaphore giving shunting signals and as the textures/tabl a-12m plates show it. The signal tool has a field for the index and a box for the m under the look of the plate; the hint of the plate names them (B 1/2 m). The style of a drawn plate, its look with the index and the m, stays with it through a rename, in the properties panel and by the station signalling, which sets neither. The signal selftest takes index= and m=. * fix(editor): the speed index of a plate takes only digits as they are typed The decimal field let in signs and dots, which stayed shown while the index held only the digits, and filled the two places before a second digit could go in. * fix(sonar): the remarks on the drawn signal plates, to pass the quality gate The new code of the plates was 5.2% technical debt against the 5% of the gate. Fixed the small remarks; the big functions stay as they are: - the speed index field and the plate looks are std::arrays, the index is copied without snprintf, the combo of the looks has a function of its own - ranges algorithms, a string_view for signal_plate_drawn, emplace_back - signal_plate.py: dict literals, a cache of fonts not named like FONTS, no unused local, the name and the m drawn by methods of their own; the plates drawn are byte for byte the same as before --------- Co-authored-by: jerrrrycho <jurek.pakula@gmail.com> Co-authored-by: maj00r <maj00r@host> * fix(editor): the tutorial and the hints tell of the kilometrage, and the first lesson takes O either way The kilometrage (X) was in no hint, no shortcut list and no lesson, though the hectometre posts and the block signals are numbered after it. The row of the track tools now reads L T G N U I X B P V J, the turntable with it, and F1 lists I / X / B. The lesson of the signals and the posts says what X does and where the posts take their numbers from, the km of the line or the km typed in their panel for the place clicked, and it opens with the kilometrage tool too. The first lesson asked to switch to the view from above, which a scenery made in the wizard opens in already: O either way does it now. * fix(editor): master's road lifting texts translated, and the panning by the wheel told of in 3D too The merge of master left the status and the label of the lifting of the road points in English: both go through the translations now. Master pans the 3D view by the wheel as well, so the lesson, the hint row and its line say it works in both views. <cstring>, dropped from the road tool before, came back in the merge and is gone again. * fix(editor): the tools of a plain line in sight, the km of a line set once, a lesson of a whole line and of the ride along a track What a layman building a line with signals and posts couldn't find: - The Signals, Kilometrage and Posts tools are in the main row of Tracks, after the tools of laying; the stations, their signals, the line block, the turntable, the trainset and the checks stay behind More. - "Objects" was where the hectometre posts are: the tool is Posts now (Słupki), its hints say the line the posts go along. - The km of a line could be typed in three places that didn't lead to each other. The panel of the posts and the one of a station, where the line has no km set, say the typed km is theirs alone and have Set the km of the line (X), opening the Kilometrage tool; that tool says first that one known point serves the posts, the stations and the block signals. - The hint of the Signals tool says to pick a signal in the list, then click beside a track; with no templates the panel says so in plain words. - A new lesson, A whole line, step by step: the tracks and switches, the km, the station, its signals, the line block, the posts and the drive, with a button to the station tool, and opened with the station tools. - The first lesson shows the ride of the camera along a track (Y, then W S A D and Z) and has it as a step to try. - lang/editor_pl.po: "Restore the terrain" and "Drag an end" were there twice, the second copies are gone. Checked: MSVC build, unit tests 459/459; editor run on a small scenery, screenshots of the toolbar, the new lesson, the first lesson with the ride ticked after Y, the panels of the posts, the kilometrage and the signals. The station panel with no km of the line wasn't seen, the scenery had no station. * fix(editor): the posts open expanded from the trainset, and the Polish of the whole-line lesson reads right B or the Posts button pressed while the trainset tab is shown opens the hectometre posts with their panel expanded. The Tracks area tooltip names the kilometrage and the posts. The station step names the shunting signals, the station button says Narzędzie Stacja, and the ride rows and the lesson list read smoother in Polish. * fix(editor): a bent model is lengthened along the tracks joined to its own, laid along another track after the bending, and set by fewer settings The ends of a bent model have handles in the view: dragged, the model goes on along the tracks joined there, at a switch the way it's dragged to. Its length, a drag of the whole model and a drag of an end all follow the joined tracks; before, they went on straight past the end of the track under the model. The panel of a bent model picks its track: another one picked, the model stays where it stands, a platform turns its edge to the new track and keeps its length. On top stay the track, the length, the offset and the height, bent or repeated, and the platform edge; the reference point, the position along, turned, mirrored, the cant and the gauge widening went under More settings. The buttons of the model's own length and of the whole track are gone: the length field and the handles do it. The links of a model to its tracks are counted anew when its pieces change, undo and redo included. * fix(editor): the bends of straights laid from the end of a curve begin with a straight, not a compound curve In the mode of straights the curve of a plain track's free end no longer goes on into the curve of the first bend as a compound curve. The line comes out of the end's curve by a transition onto a straight, and each bend gets a curve of its own. Only a curve traced in the mode of a curve goes on from the curve of the end, as it already did at a switch. * fix(editor): the bent model keeps its links and its line to what it reaches, and drags without rebuilding at each track - the links of a bent model are matched anew whenever any of its pieces change, not only the first - the line is lengthened by the plan lengths of the joined tracks and built once a round; a drag reuses the line made at its start while it doesn't grow - the tracks of one name are told apart in the track lists, and a deleted track leaves them - the tracks at the ends the copies no longer reach are left out of the line after an edit or a drag * fix(editor): a click on a bent model's handles changes nothing, and the track picked stays picked - the line is trimmed on a drag's release only when the drag changed the model, and an edit that trimming undoes makes no undo step - the track picked for the bending is kept by the track, not its place in the list, when the list is gathered anew * fix(lang): a stray line taken out of editor_pl.po A single "r" between two entries, left by an edit of the switch texts: msgfmt refuses the file with it. * feat(launcher): the range of the aerial photos of a new real scenery given on the map, changed later in the editor (#328) * feat(launcher): the new real scenery gets the range of its aerial photos on the map, changed later in the editor The wizard of a new scenery asked only for the centre; the editor then downloaded the photos around the camera wherever it went, and a scenery had no range of them until one was drawn in the orthophoto settings. The realistic scenery is made in three steps: the name, the place (a click on the map or the place typed, degrees or PUWG 1992), and the range of the aerial photos: a square of 1, 2, 5 or 10 km around the centre, or an area of the user's, its corners clicked on the map. The range is drawn on the map with its size and the number of the tiles, and it's written to the scenery as the download area (//$z), so the editor downloads the photos and the terrain model inside it only. What a beginner gets wrong is told before the scenery is made: the button stays off with the reason under it (no name, the name taken, no centre, the centre outside Poland, an area being drawn or crossing itself), and a warning comes with the centre outside the area, a large area and a centre clicked on the map of the whole country (the map zooms to the place after the first click). In the editor the download area says in plain words what it does, a square around the camera replaces it in one click, and with the camera outside it a note at the bottom of the view says there are no photos there, with the way to the range. * fix(launcher): the range of the photos asked for after the centre, the drawing given up as with Cancel, the square named by its sides The review of the range of the aerial photos found: - with My own area chosen before the centre, the clicks meant for the centre went to the corners of the area: step 3 waits for the centre; - switching to Fictional while drawing dropped the area there was before, and an unfinished one of three corners counted as done: it's given up as with Cancel now, also with Esc; Enter ends it, Backspace takes the last corner back, as in the editor; - the error of a place mistyped stayed after a click on the map; - the largest square was told to be large or not by the rounding: the warning comes from 50 sq km on; - "2 km" read as a radius: the squares say "2 x 2 km", the tooltip how far each edge is; - a place typed with an area of the user's fitted the map to the area, not to the place. In the editor the note of the camera outside the range says the terrain model isn't there either, its button says it opens the settings, it stands above the strip of the profile and the keys of the tools, and it can be closed until the camera is back inside. The squares around the camera want the place of the scenery on the map, and replace an area there is, or start one of 10 x 10 km, only with a yes. * fix(editor): one note of the empty scenery in the middle of the view, the warnings of an area told once it's drawn A new scenery opened in the editor showed two notes of the same over each other in the middle of the view: the panel of the track tools ("The scenery has no tracks yet") and the line of the terrain ("This scenery is still empty"). The line gives way to the panel now. In the wizard the centre outside the area and the crossing edges were told while the area was still being drawn; they're told once it's done. * fix(editor): the note of the camera outside the range of the photos hidden while the camera rides a track Its lines at the bottom of the view are where the camera riding a track writes the next switch and its keys. --------- Co-authored-by: maj00r <maj00r@host> --------- Co-authored-by: maj00r <maj00r@host> Co-authored-by: Hirek193 <polomarket73@gmail.com> Co-authored-by: jerrrrycho <jurek.pakula@gmail.com>
8008 lines
349 KiB
C++
8008 lines
349 KiB
C++
/*
|
|
This Source Code Form is subject to the
|
|
terms of the Mozilla Public License, v.
|
|
2.0. If a copy of the MPL was not
|
|
distributed with this file, You can
|
|
obtain one at
|
|
http://mozilla.org/MPL/2.0/.
|
|
*/
|
|
|
|
#include "stdafx.h"
|
|
#include "world/TrackSleepers.h"
|
|
#include <filesystem>
|
|
#include <format>
|
|
#include <iterator>
|
|
#include <fstream>
|
|
#include <regex>
|
|
#include "application/editormode.h"
|
|
#include "application/editormodeshared.h"
|
|
#include "application/editorgestures.h"
|
|
#include "scene/scenenodegroups.h"
|
|
#include "application/editoruilayer.h"
|
|
#ifndef _WIN32
|
|
#include <spawn.h>
|
|
#include <unistd.h>
|
|
extern char **environ;
|
|
#endif
|
|
#include "application/editorprojection.h"
|
|
|
|
#include "application/application.h"
|
|
#include "editor/editorKilometrage.hpp"
|
|
#include "editor/editorSettings.hpp"
|
|
#include "editor/editorModelSets.hpp"
|
|
#include "editor/editorTrackPresets.hpp"
|
|
#include "editor/editorIncludeInfo.hpp"
|
|
#include "editor/editorGroundMesh.hpp"
|
|
#include "editor/editorFormat.hpp"
|
|
#include "editor/editorAlignmentStore.hpp"
|
|
#include "editor/editorSwitchStore.hpp"
|
|
#include "editor/editorGeometry.hpp"
|
|
#include "editor/editorIcons.hpp"
|
|
#include "utilities/translation.h"
|
|
#include "utilities/Globals.h"
|
|
#include "utilities/glmHelpers.h"
|
|
#include "simulation/simulation.h"
|
|
#include "simulation/simulationtime.h"
|
|
#include "simulation/simulationenvironment.h"
|
|
#include "simulation/blackboxrecorder.h"
|
|
#include "utilities/Timer.h"
|
|
#include "Console.h"
|
|
#include "rendering/renderer.h"
|
|
#include "model/AnimModel.h"
|
|
#include "model/Model3d.h"
|
|
#include "world/Track.h"
|
|
#include "utilities/Float3d.h"
|
|
#include "scene/scene.h"
|
|
#include "scene/scenelayers.h"
|
|
#include "scene/sceneterrain.h"
|
|
#include "utilities/parser.h"
|
|
#include "utilities/utilities.h"
|
|
|
|
|
|
#include "imgui/imgui.h"
|
|
#include "imgui/imgui_internal.h"
|
|
#include "imgui/ImGuizmo.h"
|
|
#include "utilities/Logs.h"
|
|
#include <glm/gtc/type_ptr.hpp>
|
|
#include <glm/gtc/matrix_transform.hpp>
|
|
#include <array>
|
|
#include <chrono>
|
|
#include <cmath>
|
|
#include <functional>
|
|
#include <limits>
|
|
#include <vector>
|
|
|
|
// Static member initialization
|
|
TCamera editor_mode::Camera;
|
|
bool editor_mode::m_focus_active = false;
|
|
bool editor_mode::m_change_history = false;
|
|
bool editor_mode::m_settings_open = false;
|
|
|
|
namespace
|
|
{
|
|
using vec3 = glm::vec3;
|
|
using dvec2 = glm::dvec2;
|
|
|
|
// the steps of a frame of the editor timed: a frame whose update takes longer than kSlow tells in the log which of them took
|
|
// the time, at most twice a second
|
|
class frame_steps
|
|
{
|
|
public:
|
|
void step(char const *Name)
|
|
{
|
|
auto const now{std::chrono::steady_clock::now()};
|
|
m_steps.emplace_back(Name, std::chrono::duration<double, std::milli>(now - m_last).count());
|
|
m_last = now;
|
|
}
|
|
~frame_steps()
|
|
{
|
|
constexpr double kSlow{50.0}; // ms
|
|
auto const total{std::chrono::duration<double, std::milli>(std::chrono::steady_clock::now() - m_start).count()};
|
|
static auto told{std::chrono::steady_clock::time_point{}};
|
|
if (total < kSlow || m_start - told < std::chrono::milliseconds{500})
|
|
return;
|
|
told = m_start;
|
|
std::string text{"Editor: slow frame, update " + std::to_string(static_cast<int>(total)) + " ms:"};
|
|
for (auto const &[name, time] : m_steps)
|
|
if (time >= 3.0)
|
|
text += " " + std::string{name} + " " + std::to_string(static_cast<int>(time));
|
|
WriteLog(text, logtype::generic);
|
|
}
|
|
|
|
private:
|
|
std::chrono::steady_clock::time_point const m_start{std::chrono::steady_clock::now()};
|
|
std::chrono::steady_clock::time_point m_last{m_start};
|
|
std::vector<std::pair<char const *, double>> m_steps;
|
|
};
|
|
|
|
inline bool is_release(int state)
|
|
{
|
|
return state == GLFW_RELEASE;
|
|
}
|
|
|
|
inline bool is_press(int state)
|
|
{
|
|
return state == GLFW_PRESS;
|
|
}
|
|
|
|
// true when the most recent left button press landed in the viewport rather than on an ImGui window.
|
|
// valid once ImGui has processed the press (i.e. from mode update onwards), so it's also used to
|
|
// discard deferred pick callbacks of a press that leaked past the application's UI filter
|
|
inline bool viewport_click()
|
|
{
|
|
return false == ImGui::GetIO().MouseDownOwned[0];
|
|
}
|
|
|
|
// tests whether the vertical line through (Px,Pz) passes over triangle abc; if so returns the
|
|
// surface height at that point through OutY. used by the "snap to ground" (END) feature.
|
|
inline bool triangle_height_at(glm::dvec3 const &a, glm::dvec3 const &b, glm::dvec3 const &c,
|
|
double const Px, double const Pz, double &OutY)
|
|
{
|
|
double const ux = b.x - a.x, uz = b.z - a.z;
|
|
double const vx = c.x - a.x, vz = c.z - a.z;
|
|
double const wx = Px - a.x, wz = Pz - a.z;
|
|
double const den = ux * vz - vx * uz;
|
|
if (std::abs(den) < 1e-9)
|
|
return false; // degenerate or vertical triangle, no defined height
|
|
double const s = (wx * vz - vx * wz) / den;
|
|
double const t = (ux * wz - wx * uz) / den;
|
|
if (s < 0.0 || t < 0.0 || s + t > 1.0)
|
|
return false;
|
|
OutY = a.y + s * (b.y - a.y) + t * (c.y - a.y);
|
|
return true;
|
|
}
|
|
|
|
using world_triangle = std::array<glm::dvec3, 3>;
|
|
|
|
// walks a model's submodel tree (mirroring the renderer's transform chain) and appends every
|
|
// mesh triangle, in world space, to Out. siblings are iterated to avoid deep recursion.
|
|
void gather_submodel_triangles(TSubModel *Submodel, glm::dmat4 const &M, std::vector<world_triangle> &Out)
|
|
{
|
|
for (TSubModel *sub = Submodel; sub != nullptr; sub = sub->Next)
|
|
{
|
|
glm::dmat4 mlocal = M;
|
|
if (sub->iFlags & 0xC000 && sub->GetMatrix() != nullptr)
|
|
mlocal = M * glm::dmat4(glm::make_mat4(sub->GetMatrix()->readArray()));
|
|
|
|
if (sub->eType < TP_ROTATOR) // a drawable mesh, not a rotator/light/etc.
|
|
{
|
|
auto const handle = sub->m_geometry.handle;
|
|
if (handle.bank != 0 || handle.chunk != 0)
|
|
{
|
|
auto const &verts = GfxRenderer->Vertices(handle);
|
|
auto const &indices = GfxRenderer->Indices(handle);
|
|
auto const to_world = [&](gfx::basic_vertex const &v) {
|
|
return glm::dvec3(mlocal * glm::dvec4(glm::dvec3(v.position), 1.0));
|
|
};
|
|
if (false == indices.empty())
|
|
{
|
|
for (std::size_t i = 0; i + 2 < indices.size(); i += 3)
|
|
Out.push_back({to_world(verts[indices[i]]), to_world(verts[indices[i + 1]]), to_world(verts[indices[i + 2]])});
|
|
}
|
|
else
|
|
{
|
|
for (std::size_t i = 0; i + 2 < verts.size(); i += 3)
|
|
Out.push_back({to_world(verts[i]), to_world(verts[i + 1]), to_world(verts[i + 2])});
|
|
}
|
|
}
|
|
}
|
|
|
|
if (sub->Child != nullptr)
|
|
gather_submodel_triangles(sub->Child, mlocal, Out); // children inherit this matrix
|
|
}
|
|
}
|
|
|
|
// world transform of a model instance, matching the renderer: translate * rotateY * rotateX * rotateZ * scale
|
|
glm::dmat4 instance_matrix(TAnimModel const &Model)
|
|
{
|
|
glm::dmat4 rootm(1.0);
|
|
rootm = glm::translate(rootm, Model.location());
|
|
glm::vec3 const angles = Model.Angles();
|
|
if (angles.y != 0.0f) rootm = glm::rotate(rootm, glm::radians(static_cast<double>(angles.y)), glm::dvec3(0.0, 1.0, 0.0));
|
|
if (angles.x != 0.0f) rootm = glm::rotate(rootm, glm::radians(static_cast<double>(angles.x)), glm::dvec3(1.0, 0.0, 0.0));
|
|
if (angles.z != 0.0f) rootm = glm::rotate(rootm, glm::radians(static_cast<double>(angles.z)), glm::dvec3(0.0, 0.0, 1.0));
|
|
return glm::scale(rootm, glm::dvec3(Model.Scale()));
|
|
}
|
|
|
|
// even-odd test of a point against a polygon outline projected onto the XZ plane
|
|
bool point_in_polygon_xz(std::vector<glm::dvec3> const &Polygon, double const X, double const Z)
|
|
{
|
|
bool inside = false;
|
|
for (std::size_t i = 0, j = Polygon.size() - 1; i < Polygon.size(); j = i++)
|
|
{
|
|
auto const &a = Polygon[i];
|
|
auto const &b = Polygon[j];
|
|
if ((a.z > Z) != (b.z > Z) && X < (b.x - a.x) * (Z - a.z) / (b.z - a.z) + a.x)
|
|
inside = !inside;
|
|
}
|
|
return inside;
|
|
}
|
|
|
|
// area of a polygon outline projected onto the XZ plane (shoelace formula)
|
|
double polygon_area_xz(std::vector<glm::dvec3> const &Polygon)
|
|
{
|
|
if (Polygon.size() < 3)
|
|
return 0.0;
|
|
double sum = 0.0;
|
|
for (std::size_t i = 0, j = Polygon.size() - 1; i < Polygon.size(); j = i++)
|
|
sum += Polygon[j].x * Polygon[i].z - Polygon[i].x * Polygon[j].z;
|
|
return std::abs(sum) * 0.5;
|
|
}
|
|
|
|
// world triangles bucketed on a uniform XZ grid, for many ground height queries over one area
|
|
class triangle_grid
|
|
{
|
|
public:
|
|
triangle_grid(std::vector<world_triangle> Triangles, glm::dvec2 const &Min, glm::dvec2 const &Max) : m_triangles(std::move(Triangles)), m_min(Min)
|
|
{
|
|
glm::dvec2 const extent = glm::max(Max - Min, glm::dvec2(1.0));
|
|
if (false == std::isfinite(extent.x) || false == std::isfinite(extent.y))
|
|
{
|
|
m_triangles.clear();
|
|
m_cells.resize(1);
|
|
return;
|
|
}
|
|
// ~8 m cells, coarser for big areas so large terrain triangles don't flood the grid
|
|
m_cellsize = std::max(8.0, std::max(extent.x, extent.y) / 128.0);
|
|
m_columns = static_cast<int>(std::ceil(extent.x / m_cellsize)) + 1;
|
|
m_rows = static_cast<int>(std::ceil(extent.y / m_cellsize)) + 1;
|
|
m_cells.resize(static_cast<std::size_t>(m_columns) * m_rows);
|
|
|
|
for (std::uint32_t idx = 0; idx < m_triangles.size(); ++idx)
|
|
{
|
|
auto const &t = m_triangles[idx];
|
|
int const c0 = column(std::min({t[0].x, t[1].x, t[2].x}));
|
|
int const c1 = column(std::max({t[0].x, t[1].x, t[2].x}));
|
|
int const r0 = row(std::min({t[0].z, t[1].z, t[2].z}));
|
|
int const r1 = row(std::max({t[0].z, t[1].z, t[2].z}));
|
|
for (int r = r0; r <= r1; ++r)
|
|
for (int c = c0; c <= c1; ++c)
|
|
m_cells[static_cast<std::size_t>(r) * m_columns + c].push_back(idx);
|
|
}
|
|
}
|
|
|
|
// highest surface at (X,Z) that isn't above Ceiling. returns: true if there is one, and which triangle it is in Index if asked
|
|
bool height_at(double const X, double const Z, double const Ceiling, double &OutY, std::uint32_t *Index = nullptr) const
|
|
{
|
|
bool found = false;
|
|
for (auto const idx : m_cells[static_cast<std::size_t>(row(Z)) * m_columns + column(X)])
|
|
{
|
|
auto const &t = m_triangles[idx];
|
|
double y;
|
|
if (triangle_height_at(t[0], t[1], t[2], X, Z, y) && y <= Ceiling && (!found || y > OutY))
|
|
{
|
|
OutY = y;
|
|
found = true;
|
|
if (Index != nullptr)
|
|
*Index = idx;
|
|
}
|
|
}
|
|
return found;
|
|
}
|
|
|
|
private:
|
|
int column(double const X) const
|
|
{
|
|
double const cell = std::floor((X - m_min.x) / m_cellsize);
|
|
return cell > 0.0 ? static_cast<int>(std::min(cell, static_cast<double>(m_columns - 1))) : 0;
|
|
}
|
|
int row(double const Z) const
|
|
{
|
|
double const cell = std::floor((Z - m_min.y) / m_cellsize);
|
|
return cell > 0.0 ? static_cast<int>(std::min(cell, static_cast<double>(m_rows - 1))) : 0;
|
|
}
|
|
|
|
std::vector<world_triangle> m_triangles;
|
|
std::vector<std::vector<std::uint32_t>> m_cells;
|
|
glm::dvec2 m_min;
|
|
double m_cellsize{8.0};
|
|
int m_columns{1};
|
|
int m_rows{1};
|
|
};
|
|
|
|
// meshes of the shapes and the models asked about as ground. the ground is asked about a tile at a time, by the orthophoto
|
|
// and by the road tools, and without these every question meant going through every triangle of every terrain model in reach
|
|
struct ground_record
|
|
{
|
|
ground_mesh mesh;
|
|
// what the mesh was made of, to tell when it has to be made again
|
|
std::size_t vertices{0};
|
|
std::size_t indices{0};
|
|
glm::dvec3 origin{0.0};
|
|
TModel3d const *model{nullptr};
|
|
glm::dmat4 matrix{0.0};
|
|
std::uint64_t used{0}; // number of the last question it served
|
|
};
|
|
std::unordered_map<std::uint64_t, ground_record> ground_shapes; // by the geometry of the shape
|
|
std::unordered_map<TAnimModel const *, ground_record> ground_models;
|
|
std::uint64_t ground_question{0};
|
|
std::size_t ground_held{0}; // triangles in the meshes
|
|
std::size_t constexpr ground_limit = 8000000; // triangles kept; some 400 MB with the grids
|
|
std::size_t constexpr ground_small = 256; // triangles; anything smaller is quicker to go through than to look up
|
|
|
|
// lets go of the meshes left alone the longest, once there's too much of them
|
|
void trim_ground_meshes()
|
|
{
|
|
if (ground_held <= ground_limit)
|
|
return;
|
|
std::vector<std::uint64_t> ages;
|
|
for (auto const &record : ground_shapes)
|
|
ages.emplace_back(record.second.used);
|
|
for (auto const &record : ground_models)
|
|
ages.emplace_back(record.second.used);
|
|
std::sort(ages.begin(), ages.end());
|
|
// the older half goes, except for what the current question needed
|
|
auto const threshold = std::min(ages[ages.size() / 2], ground_question - 1);
|
|
for (auto record = ground_shapes.begin(); record != ground_shapes.end();)
|
|
{
|
|
if (record->second.used <= threshold)
|
|
{
|
|
ground_held -= record->second.mesh.size();
|
|
record = ground_shapes.erase(record);
|
|
}
|
|
else
|
|
++record;
|
|
}
|
|
for (auto record = ground_models.begin(); record != ground_models.end();)
|
|
{
|
|
if (record->second.used <= threshold)
|
|
{
|
|
ground_held -= record->second.mesh.size();
|
|
record = ground_models.erase(record);
|
|
}
|
|
else
|
|
++record;
|
|
}
|
|
}
|
|
|
|
// forgets the meshes of the shapes, whose geometry can be changed in place (terrain being sculpted)
|
|
void forget_ground_shapes()
|
|
{
|
|
for (auto const &record : ground_shapes)
|
|
ground_held -= record.second.mesh.size();
|
|
ground_shapes.clear();
|
|
}
|
|
|
|
// appends triangles of a shape node which overlap specified XZ rectangle
|
|
void gather_shape_triangles(scene::shape_node const &Shape, glm::dvec2 const &Min, glm::dvec2 const &Max, std::vector<world_triangle> &Out, bool const Skiproads = false)
|
|
{
|
|
auto const &data = Shape.data();
|
|
if (editor_orthophoto::owns(data.geometry))
|
|
return; // the orthophoto laid over the ground isn't ground itself
|
|
if (Skiproads && owned_shapes::owns(data.geometry))
|
|
return; // neither are the roads, for the ones which ask where to put a road
|
|
if (data.area.radius >= 0.0f)
|
|
{
|
|
double const r = data.area.radius;
|
|
if (data.area.center.x + r < Min.x || data.area.center.x - r > Max.x || data.area.center.z + r < Min.y || data.area.center.z - r > Max.y)
|
|
return;
|
|
}
|
|
|
|
auto const add = [&](glm::dvec3 const &a, glm::dvec3 const &b, glm::dvec3 const &c) {
|
|
if (std::max({a.x, b.x, c.x}) < Min.x || std::min({a.x, b.x, c.x}) > Max.x || std::max({a.z, b.z, c.z}) < Min.y || std::min({a.z, b.z, c.z}) > Max.y)
|
|
return;
|
|
Out.push_back({a, b, c});
|
|
};
|
|
|
|
if (false == data.vertices.empty())
|
|
{
|
|
for (std::size_t i = 0; i + 2 < data.vertices.size(); i += 3)
|
|
add(data.vertices[i].position, data.vertices[i + 1].position, data.vertices[i + 2].position);
|
|
return;
|
|
}
|
|
// once the shape is uploaded its world-space source is released; the renderer keeps an origin-relative copy
|
|
if (data.geometry.bank == 0 && data.geometry.chunk == 0)
|
|
return;
|
|
auto const &verts = GfxRenderer->Vertices(data.geometry);
|
|
auto const &indices = GfxRenderer->Indices(data.geometry);
|
|
auto const count = (indices.empty() ? verts.size() : indices.size()) / 3;
|
|
if (count >= ground_small)
|
|
{
|
|
// a large shape is sorted once, and asked for what's in the rectangle from then on
|
|
auto &record = ground_shapes[(static_cast<std::uint64_t>(data.geometry.bank) << 32) | data.geometry.chunk];
|
|
if (record.mesh.size() == 0 || record.vertices != verts.size() || record.indices != indices.size() || record.origin != data.origin)
|
|
{
|
|
std::vector<ground_mesh::triangle> triangles;
|
|
triangles.reserve(count);
|
|
if (false == indices.empty())
|
|
{
|
|
for (std::size_t i = 0; i + 2 < indices.size(); i += 3)
|
|
triangles.push_back({verts[indices[i]].position, verts[indices[i + 1]].position, verts[indices[i + 2]].position});
|
|
}
|
|
else
|
|
{
|
|
for (std::size_t i = 0; i + 2 < verts.size(); i += 3)
|
|
triangles.push_back({verts[i].position, verts[i + 1].position, verts[i + 2].position});
|
|
}
|
|
ground_held -= record.mesh.size();
|
|
record.mesh.assign(std::move(triangles), data.origin);
|
|
ground_held += record.mesh.size();
|
|
record.vertices = verts.size();
|
|
record.indices = indices.size();
|
|
record.origin = data.origin;
|
|
}
|
|
record.used = ground_question;
|
|
record.mesh.collect(Min, Max, Out);
|
|
return;
|
|
}
|
|
auto const to_world = [&](gfx::basic_vertex const &v) { return data.origin + glm::dvec3(v.position); };
|
|
if (false == indices.empty())
|
|
{
|
|
for (std::size_t i = 0; i + 2 < indices.size(); i += 3)
|
|
add(to_world(verts[indices[i]]), to_world(verts[indices[i + 1]]), to_world(verts[indices[i + 2]]));
|
|
}
|
|
else
|
|
{
|
|
for (std::size_t i = 0; i + 2 < verts.size(); i += 3)
|
|
add(to_world(verts[i]), to_world(verts[i + 1]), to_world(verts[i + 2]));
|
|
}
|
|
}
|
|
|
|
// ground triangles overlapping an XZ rectangle (Min/Max are x,z). shapes hold the (legacy) terrain,
|
|
// model instances at least ModelRadius large (if ModelsAsGround) the terrain tiles
|
|
// Heightmap: the heightmap terrain is given as triangles too (for the ones which can ask the terrain for heights, it's a waste)
|
|
void gather_ground_triangles(glm::dvec2 const &Min, glm::dvec2 const &Max, bool const ModelsAsGround, float const ModelRadius, std::vector<world_triangle> &Out, bool const Skiproads = false,
|
|
bool const Heightmap = true)
|
|
{
|
|
auto const started = std::chrono::steady_clock::now();
|
|
++ground_question;
|
|
glm::dvec2 const center = (Min + Max) * 0.5;
|
|
float const radius = static_cast<float>(glm::length(Max - Min) * 0.5);
|
|
auto const sections = simulation::Region->sections(glm::dvec3(center.x, 0.0, center.y), radius); // copy, the result is a scratchpad
|
|
for (auto *section : sections)
|
|
{
|
|
for (auto const &shape : section->m_shapes)
|
|
gather_shape_triangles(shape, Min, Max, Out, Skiproads);
|
|
for (auto &cell : section->m_cells)
|
|
{
|
|
double const r = cell.m_area.radius;
|
|
if (cell.m_area.center.x + r < Min.x || cell.m_area.center.x - r > Max.x || cell.m_area.center.z + r < Min.y || cell.m_area.center.z - r > Max.y)
|
|
continue;
|
|
for (auto const &shape : cell.m_shapesopaque)
|
|
gather_shape_triangles(shape, Min, Max, Out);
|
|
if (false == ModelsAsGround)
|
|
continue;
|
|
for (auto *instance : cell.m_instancesopaque)
|
|
{
|
|
if (instance == nullptr || instance->Model() == nullptr || instance->radius() < ModelRadius)
|
|
continue;
|
|
// going through the triangles of a model which doesn't reach the rectangle is all cost and no gain
|
|
double const reach = instance->radius();
|
|
if (instance->location().x + reach < Min.x || instance->location().x - reach > Max.x || instance->location().z + reach < Min.y || instance->location().z - reach > Max.y)
|
|
continue;
|
|
// the model is gone through once, and asked for what's in the rectangle from then on, for as long as it stays put
|
|
auto const matrix = instance_matrix(*instance);
|
|
auto &record = ground_models[instance];
|
|
if (record.model != instance->Model() || record.matrix != matrix)
|
|
{
|
|
std::vector<world_triangle> modeltriangles;
|
|
gather_submodel_triangles(instance->Model()->Root, matrix, modeltriangles);
|
|
glm::dvec3 const origin = instance->location();
|
|
std::vector<ground_mesh::triangle> triangles;
|
|
triangles.reserve(modeltriangles.size());
|
|
for (auto const &t : modeltriangles)
|
|
triangles.push_back({glm::vec3(t[0] - origin), glm::vec3(t[1] - origin), glm::vec3(t[2] - origin)});
|
|
ground_held -= record.mesh.size();
|
|
record.mesh.assign(std::move(triangles), origin);
|
|
ground_held += record.mesh.size();
|
|
// a model which isn't loaded yet has nothing to show for itself, and is looked at again the next time
|
|
record.model = (record.mesh.size() > 0 ? instance->Model() : nullptr);
|
|
record.matrix = matrix;
|
|
}
|
|
record.used = ground_question;
|
|
record.mesh.collect(Min, Max, Out);
|
|
}
|
|
}
|
|
}
|
|
// the heightmap terrain answers for itself, with its full grid whatever is drawn of it
|
|
if (Heightmap)
|
|
EditorTerrain.gather_triangles(Min, Max, Out);
|
|
trim_ground_meshes();
|
|
// going through the scenery is the one thing here which can take long enough to be felt; when it does it's worth knowing
|
|
auto const elapsed = std::chrono::duration<double, std::milli>(std::chrono::steady_clock::now() - started).count();
|
|
if (elapsed > 250.0)
|
|
WriteLog("editor: gathering the ground took " + std::to_string(static_cast<int>(elapsed)) + " ms, for " + std::to_string(Out.size()) + " triangles; " + std::to_string(ground_held) + " are kept for the next time");
|
|
}
|
|
|
|
// ground kept for the road tools, which ask about the same places frame after frame. it's gathered a tile at a time:
|
|
// gathering is what takes time, so a place asked about for the first time costs a single tile a frame instead of a stall
|
|
struct ground_tile
|
|
{
|
|
std::unique_ptr<triangle_grid> grid;
|
|
double gathered{0.0}; // when, on the clock of the user interface
|
|
int used{0}; // frame it was last asked for
|
|
};
|
|
double constexpr ground_tile_size = 256.0;
|
|
double constexpr ground_tile_lifetime = 30.0; // older tiles are gathered again when asked for, to catch up with the scenery
|
|
std::size_t constexpr ground_tile_limit = 96;
|
|
std::map<std::pair<int, int>, ground_tile> ground_tiles;
|
|
int ground_tile_frame{-1}; // frame the last tile was gathered in without being told to
|
|
|
|
// scenery file name without path and extension
|
|
std::string scenery_stem()
|
|
{
|
|
std::string scenery = Global.SceneryFile;
|
|
auto const slash = scenery.find_last_of("/\\");
|
|
if (slash != std::string::npos)
|
|
scenery = scenery.substr(slash + 1);
|
|
auto const dot = scenery.find_last_of('.');
|
|
if (dot != std::string::npos)
|
|
scenery = scenery.substr(0, dot);
|
|
return scenery.empty() ? "default" : scenery;
|
|
}
|
|
|
|
}
|
|
|
|
bool editor_mode::editormode_input::init()
|
|
{
|
|
return mouse.init() && keyboard.init();
|
|
}
|
|
|
|
void editor_mode::editormode_input::poll()
|
|
{
|
|
keyboard.poll();
|
|
}
|
|
|
|
editor_mode::editor_mode() {
|
|
alignment_store::reset();
|
|
switch_store::reset();
|
|
kilometrage::reset();
|
|
m_userinterface = std::make_shared<editor_ui>();
|
|
// the area fill settings live in the node bank window, in the tab of the fill mode
|
|
ui()->set_fill_options([this]() { render_area_fill(); });
|
|
ui()->set_gizmo_options([this]() { render_gizmo_options(); });
|
|
ui()->set_toolbar_options([this]() { render_toolbar(); });
|
|
ui()->set_workspace_bar([this]() { render_workspaces(); });
|
|
ui()->set_track_options([this]() { render_track_tool_options(); }, [this]() { render_track_selection(); });
|
|
ui()->set_workspace_options(editor_ui::workspace::roads, [this]() { render_road_tool_options(); }, [this]() { render_road_selection(); });
|
|
ui()->set_workspace_options(editor_ui::workspace::terrain, [this]() { render_terrain_tool_options(); });
|
|
ui()->set_workspace_bank(editor_ui::workspace::terrain, [this]() { render_texture_browser(); }, STR("Textures"));
|
|
// a node picked in the scene window is selected as if clicked in the view; a double click flies the camera to it
|
|
ui()->set_scene_select([this](scene::basic_node *Node, bool const Focus) {
|
|
if (Focus)
|
|
start_focus(Node);
|
|
std::string reason;
|
|
if (Node->from_template() || false == scene::Layers.editable(Node, &reason))
|
|
{
|
|
ui()->set_status(format(STR_C("\"%s\" can't be edited: %s"), name_of(*Node).c_str(), reason.c_str()), true);
|
|
return;
|
|
}
|
|
m_track_window_open = false;
|
|
ui()->set_mode(nodebank_panel::MODIFY);
|
|
m_node = Node;
|
|
ui()->set_node(m_node);
|
|
});
|
|
ui()->set_array_options([this]() { render_array(); });
|
|
ui()->set_bend_options([this]() { render_bend(); });
|
|
ui()->set_file_actions([this]() { save(); }, [this]() { export_scenery(); });
|
|
ui()->set_new_scenery([this]() { m_newscenery_asked = true; });
|
|
ui()->set_open_scenery([this]() { m_openscenery_asked = true; });
|
|
ui()->set_edit_menu([this]() { render_edit_menu(); });
|
|
ui()->set_tools_menu([this]() { render_track_presets_menu(); });
|
|
ui()->set_menu_options([this]() {
|
|
render_object_menu();
|
|
render_view_menu();
|
|
render_map_menu();
|
|
render_help_menu();
|
|
});
|
|
m_roadtool.settings.normalize();
|
|
road_select(nullptr);
|
|
ground_sources(m_orthophoto);
|
|
ui()->set_base_layers([this]() { render_base_layers(); });
|
|
editor_track::observe(this);
|
|
}
|
|
|
|
void editor_mode::ground_sources(editor_orthophoto &Layer)
|
|
{
|
|
// the imagery is fitted onto the same ground as the area fill uses, terrain tile models included
|
|
// the roads built in the editor aren't ground: the imagery goes under them
|
|
Layer.ground_source([](glm::dvec2 const &Min, glm::dvec2 const &Max, bool const Heightmap, std::vector<world_triangle> &Out) {
|
|
gather_ground_triangles(Min, Max, true, 50.0f, Out, true, Heightmap);
|
|
});
|
|
Layer.height_source([](double const X, double const Z, double &Height) { return EditorTerrain.height_at(X, Z, Height); });
|
|
// the imagery often comes before the terrain made from the model: it lies where the terrain will be
|
|
Layer.guess_source([this](double const X, double const Z, double &Height) {
|
|
if (nmt_ground(X, Z, Height))
|
|
return true;
|
|
// asked for, the tile goes onto it once it comes
|
|
if (m_nmt.placed())
|
|
m_nmt.request({X - 1.0, Z - 1.0}, {X + 1.0, Z + 1.0});
|
|
return false;
|
|
});
|
|
}
|
|
|
|
editor_mode::~editor_mode()
|
|
{
|
|
editor_track::observe(nullptr);
|
|
}
|
|
|
|
std::vector<double> editor_mode::ground_heights(std::vector<glm::dvec3> const &Points, bool const Fresh, std::vector<char> *Found) const
|
|
{
|
|
std::vector<double> heights;
|
|
heights.reserve(Points.size());
|
|
if (Found != nullptr)
|
|
Found->assign(Points.size(), 0);
|
|
for (auto const &point : Points)
|
|
heights.push_back(point.y);
|
|
if (Points.empty() || simulation::Region == nullptr)
|
|
return heights;
|
|
|
|
double const now = ImGui::GetTime();
|
|
int const frame = ImGui::GetFrameCount();
|
|
// surfaces much higher than the point are something it's under, rather than the ground
|
|
double constexpr height_tolerance = 50.0;
|
|
auto const terrains = active_terrains();
|
|
for (std::size_t i = 0; i < Points.size(); ++i)
|
|
{
|
|
auto const &p = Points[i];
|
|
if (false == std::isfinite(p.x) || false == std::isfinite(p.y) || false == std::isfinite(p.z))
|
|
continue;
|
|
std::pair<int, int> const key{static_cast<int>(std::floor(p.x / ground_tile_size)), static_cast<int>(std::floor(p.z / ground_tile_size))};
|
|
auto &tile = ground_tiles[key];
|
|
bool const missing = (tile.grid == nullptr);
|
|
bool const stale = missing || now < tile.gathered || now - tile.gathered > ground_tile_lifetime;
|
|
// told to wait the caller gets every tile it needs, otherwise what's there, with one tile gathered each frame
|
|
if (stale && (Fresh ? missing : ground_tile_frame != frame))
|
|
{
|
|
glm::dvec2 const tilemin{key.first * ground_tile_size, key.second * ground_tile_size};
|
|
glm::dvec2 const tilemax{tilemin + glm::dvec2{ground_tile_size}};
|
|
std::vector<world_triangle> triangles;
|
|
// the same ground as the area fill uses, terrain tile models included
|
|
gather_ground_triangles(tilemin, tilemax, true, 50.0f, triangles, true);
|
|
tile.grid = std::make_unique<triangle_grid>(std::move(triangles), tilemin, tilemax);
|
|
tile.gathered = now;
|
|
if (false == Fresh)
|
|
ground_tile_frame = frame;
|
|
}
|
|
tile.used = frame;
|
|
|
|
double const ceiling = p.y + height_tolerance;
|
|
double y = 0.0;
|
|
bool found = (tile.grid != nullptr) && tile.grid->height_at(p.x, p.z, ceiling, y);
|
|
for (editor_terrain *terrain : terrains)
|
|
{
|
|
if (!terrain->contains(p.x, p.z))
|
|
continue;
|
|
double const h = terrain->height_at(p.x, p.z);
|
|
if (h <= ceiling && (!found || h > y))
|
|
{
|
|
y = h;
|
|
found = true;
|
|
}
|
|
}
|
|
if (found)
|
|
heights[i] = y;
|
|
if (Found != nullptr)
|
|
(*Found)[i] = found ? 1 : 0;
|
|
}
|
|
// the tiles left alone the longest go once there are too many
|
|
while (ground_tiles.size() > ground_tile_limit)
|
|
{
|
|
auto oldest = ground_tiles.begin();
|
|
for (auto tile = ground_tiles.begin(); tile != ground_tiles.end(); ++tile)
|
|
if (tile->second.used < oldest->second.used)
|
|
oldest = tile;
|
|
if (oldest->second.used == frame)
|
|
break;
|
|
ground_tiles.erase(oldest);
|
|
}
|
|
return heights;
|
|
}
|
|
|
|
editor_ui *editor_mode::ui() const
|
|
{
|
|
return static_cast<editor_ui *>(m_userinterface.get());
|
|
}
|
|
|
|
bool editor_mode::init()
|
|
{
|
|
EditorSettings.load();
|
|
Global.EditorOrthoTracks = EditorSettings.top_tracks();
|
|
// the terrain model as the user left it; the settings are read only here, after the mode was made
|
|
auto const &model{EditorSettings.terrain_model()};
|
|
m_nmt_state.grow = EditorSettings.terrain_while_laying();
|
|
m_nmt_state.band = std::clamp(model.band, 50.0, 3000.0);
|
|
// the formation and the slopes are always made along the tracks: the switch of them is gone, a setting left off by it isn't kept
|
|
m_nmt_state.follow = model.follow;
|
|
m_terrain_add_count = std::clamp(model.around, 1, 8);
|
|
EditorModelSets.load();
|
|
EditorTrackPresets.load();
|
|
Camera.Init({0, 15, 0}, {glm::radians(-30.0), glm::radians(180.0), 0}, nullptr);
|
|
return m_input.init();
|
|
}
|
|
|
|
void editor_mode::apply_rotation_for_new_node(scene::basic_node *node, int rotation_mode, float fixed_rotation_value)
|
|
{
|
|
if (!node)
|
|
return;
|
|
|
|
if (rotation_mode == functions_panel::RANDOM)
|
|
{
|
|
const vec3 rotation{0.0f, LocalRandom(0.0, 360.0), 0.0f};
|
|
m_editor.rotate(node, rotation, 1);
|
|
}
|
|
else if (rotation_mode == functions_panel::FIXED)
|
|
{
|
|
const vec3 rotation{0.0f, fixed_rotation_value, 0.0f};
|
|
m_editor.rotate(node, rotation, 0);
|
|
}
|
|
}
|
|
|
|
void editor_mode::start_focus(scene::basic_node *node, double duration)
|
|
{
|
|
if (!node)
|
|
return;
|
|
|
|
glm::dvec3 const center = node->location();
|
|
|
|
// distance that frames the object's bounding sphere within the vertical FOV, with some margin
|
|
double const radius = std::max(1.0, static_cast<double>(node->radius()));
|
|
double const fovy = glm::radians(static_cast<double>(Global.FieldOfView) / std::max(0.01, static_cast<double>(Global.ZoomFactor)));
|
|
double distance = radius / std::tan(fovy * 0.5) * 1.6;
|
|
distance = std::clamp(distance, radius * 1.5, static_cast<double>(kMaxPlacementDistance));
|
|
|
|
// keep the camera on the side it currently views from, so the move turns toward the object
|
|
// rather than flying around it; fall back to a pleasant 3/4 direction when sitting on top of it
|
|
glm::dvec3 dir = Camera.Pos - center;
|
|
double const len = glm::length(dir);
|
|
dir = len > 1e-3 ? dir / len : glm::normalize(glm::dvec3(1.0, 0.5, 1.0));
|
|
|
|
// looking from there straight at the object
|
|
fly_to(center, -dir, distance, duration);
|
|
}
|
|
|
|
void editor_mode::fly_to(glm::dvec3 const &Target, glm::dvec3 const &Look, double const Distance, double const Duration)
|
|
{
|
|
// the camera flown off somewhere leaves the track it rode along
|
|
m_ride.leave();
|
|
m_focus_start_pos = Camera.Pos;
|
|
m_focus_start_angle = Camera.Angle;
|
|
m_focus_target_pos = Target - Look * Distance;
|
|
m_focus_target_angle = glm::vec3(static_cast<float>(std::asin(std::clamp(Look.y, -1.0, 1.0))), static_cast<float>(std::atan2(-Look.x, -Look.z)), 0.0f);
|
|
m_focus_active = true;
|
|
m_focus_time = 0.0;
|
|
m_focus_duration = Duration;
|
|
}
|
|
|
|
void editor_mode::snap_to_ground(scene::basic_node *node, bool const Alone, bool const Joined)
|
|
{
|
|
if (!node || !simulation::Region)
|
|
return;
|
|
|
|
glm::dvec3 const origin = node->location();
|
|
if (!simulation::Region->point_inside(origin))
|
|
return;
|
|
|
|
// the same ground the models are put on when they're inserted: the terrain shapes, the terrain tile models and the terrain
|
|
// patches of the editor, under the node, or over it when it went under the ground. the shapes alone and the spheres of the
|
|
// models around, which were asked about before, missed the ground of the sceneries made of terrain tile models
|
|
glm::dvec3 const target = placement_on_ground(origin);
|
|
if (std::abs(target.y - origin.y) < 1e-4)
|
|
return;
|
|
|
|
push_snapshot(node, EditorSnapshot::Action::Move);
|
|
if (false == m_history.empty())
|
|
m_history.back().joined = Joined;
|
|
if (auto *model = dynamic_cast<TAnimModel *>(node); Alone && model != nullptr && node->group() > 1)
|
|
{
|
|
// the model of a group goes down by itself, the rest of the group stays
|
|
simulation::Region->erase(model);
|
|
model->location(target);
|
|
simulation::Region->insert(model);
|
|
model->mark_dirty();
|
|
return;
|
|
}
|
|
m_editor.translate(node, target, true); // true == apply the computed Y (free vertical move)
|
|
}
|
|
|
|
void editor_mode::handle_brush_mouse_hold(int Action, int Button)
|
|
{
|
|
auto const mode = ui()->mode();
|
|
auto const rotation_mode = ui()->rot_mode();
|
|
auto const fixed_rotation_value = ui()->rot_val();
|
|
|
|
if(mode != nodebank_panel::BRUSH)
|
|
return;
|
|
|
|
GfxRenderer->Pick_Node_Callback(
|
|
[this, mode, rotation_mode, fixed_rotation_value, Action, Button](scene::basic_node * /*node*/) {
|
|
// picks are resolved a few frames later; drop the ones queued before the button went up,
|
|
// or for a press that turned out to belong to the UI
|
|
if (!mouseHold || !viewport_click())
|
|
return;
|
|
|
|
// spacing is measured in world space: the mouse offset is camera-relative and the camera may move mid-stroke
|
|
glm::dvec3 const newPos = Camera.Pos + clamp_mouse_offset_to_max(GfxRenderer->Mouse_Position());
|
|
if (m_brush_has_last && glm::distance(newPos, oldPos) < ui()->getSpacing())
|
|
return;
|
|
|
|
// picked only when a placement is due, so a random pick from a set isn't drawn every tick
|
|
const std::string *src = ui()->get_active_node_template();
|
|
if (!src || src->starts_with(editor_includes::directive_mark)) // scenery templates are placed one at a time
|
|
return;
|
|
|
|
// NOTE: no name for what the brush puts in, as with thousands of nodes the names take their share of the time
|
|
// the scenery needs to load. a node which needs one, to be referred to by an event, gets it in the node properties
|
|
TAnimModel *cloned = simulation::State.create_model(*src, std::string{}, placement_on_ground(newPos));
|
|
oldPos = newPos;
|
|
m_brush_has_last = true;
|
|
if (!cloned)
|
|
return;
|
|
|
|
apply_rotation_for_new_node(cloned, rotation_mode, fixed_rotation_value);
|
|
|
|
std::string as_text;
|
|
cloned->export_as_text(as_text);
|
|
push_snapshot(cloned, EditorSnapshot::Action::Add, as_text);
|
|
|
|
m_node = cloned;
|
|
ui()->set_node(m_node);
|
|
});
|
|
}
|
|
|
|
void editor_mode::add_to_hierarchy(scene::basic_node *node)
|
|
{
|
|
if (!node) return;
|
|
scene::Hierarchy[node->uuid.to_string()] = node;
|
|
}
|
|
|
|
void editor_mode::remove_from_hierarchy(scene::basic_node *node)
|
|
{
|
|
if (!node) return;
|
|
auto it = scene::Hierarchy.find(node->uuid.to_string());
|
|
if (it != scene::Hierarchy.end())
|
|
scene::Hierarchy.erase(it);
|
|
}
|
|
|
|
scene::basic_node* editor_mode::find_in_hierarchy(const std::string &uuid_str)
|
|
{
|
|
if (uuid_str.empty()) return nullptr;
|
|
auto it = scene::Hierarchy.find(uuid_str);
|
|
return it != scene::Hierarchy.end() ? it->second : nullptr;
|
|
}
|
|
|
|
scene::basic_node* editor_mode::find_node_by_any(scene::basic_node *node_ptr, const std::string &uuid_str, const std::string &name)
|
|
{
|
|
if (node_ptr) return node_ptr;
|
|
|
|
if (!uuid_str.empty()) {
|
|
auto *node = find_in_hierarchy(uuid_str);
|
|
if (node) return node;
|
|
}
|
|
|
|
if (!name.empty()) {
|
|
return simulation::Instances.find(name);
|
|
}
|
|
|
|
return nullptr;
|
|
}
|
|
|
|
void editor_mode::push_snapshot(scene::basic_node *node, EditorSnapshot::Action Action, std::string const &Serialized)
|
|
{
|
|
if (!node)
|
|
return;
|
|
|
|
if(m_max_history_size >= 0 && (int)m_history.size() >= m_max_history_size)
|
|
{
|
|
m_history.erase(m_history.begin(), m_history.begin() + ((int)m_history.size() - m_max_history_size + 1));
|
|
}
|
|
|
|
EditorSnapshot snap;
|
|
snap.action = Action;
|
|
snap.node_name = node->name();
|
|
snap.position = node->location();
|
|
snap.uuid = node->uuid;
|
|
snap.layer = node->layer();
|
|
|
|
if (auto *model = dynamic_cast<TAnimModel *>(node))
|
|
{
|
|
snap.rotation = model->Angles();
|
|
snap.scale = model->Scale();
|
|
}
|
|
else
|
|
{
|
|
snap.rotation = glm::vec3(0.0f);
|
|
snap.scale = glm::vec3(1.0f);
|
|
}
|
|
|
|
if (Action == EditorSnapshot::Action::Delete || Action == EditorSnapshot::Action::Add)
|
|
{
|
|
if (!Serialized.empty())
|
|
snap.serialized = Serialized;
|
|
else
|
|
node->export_as_text(snap.serialized);
|
|
}
|
|
|
|
|
|
snap.node_ptr = node;
|
|
|
|
m_history.push_back(std::move(snap));
|
|
g_redo.clear();
|
|
}
|
|
|
|
glm::dvec3 editor_mode::clamp_mouse_offset_to_max(const glm::dvec3 &offset)
|
|
{
|
|
double len = glm::length(offset);
|
|
if (len <= static_cast<double>(kMaxPlacementDistance) || len <= 1e-6)
|
|
return offset;
|
|
return glm::normalize(offset) * static_cast<double>(kMaxPlacementDistance);
|
|
}
|
|
|
|
void editor_mode::nullify_history_pointers(scene::basic_node *node)
|
|
{
|
|
if (!node)
|
|
return;
|
|
|
|
if (ui()->node() == node)
|
|
ui()->set_node(nullptr);
|
|
infra_forget(node);
|
|
for (auto *tool : m_tools)
|
|
tool->forget(node);
|
|
|
|
auto const followed = [node](infra::object_state const &State) { return State.saved.node == node; };
|
|
for (auto &s : m_history)
|
|
{
|
|
if (s.node_ptr == node)
|
|
s.node_ptr = nullptr;
|
|
for (auto © : s.copies)
|
|
{
|
|
if (copy.model == node)
|
|
copy.model = nullptr;
|
|
}
|
|
s.infra.erase(std::remove_if(s.infra.begin(), s.infra.end(), followed), s.infra.end());
|
|
}
|
|
|
|
for (auto &s : g_redo)
|
|
{
|
|
if (s.node_ptr == node)
|
|
s.node_ptr = nullptr;
|
|
s.infra.erase(std::remove_if(s.infra.begin(), s.infra.end(), followed), s.infra.end());
|
|
}
|
|
|
|
// deleted nodes also drop out of the "undo last fill" set
|
|
m_fill_last.erase(std::remove(m_fill_last.begin(), m_fill_last.end(), node), m_fill_last.end());
|
|
// and out of the selection and their group
|
|
m_selection.erase(std::remove(m_selection.begin(), m_selection.end(), node), m_selection.end());
|
|
scene::Groups.remove(node);
|
|
|
|
// an array no longer follows its settings once the model it was made of is gone
|
|
if (m_array.base == node)
|
|
m_array.base = nullptr;
|
|
}
|
|
|
|
void editor_mode::terrain_history_step()
|
|
{
|
|
if (false == m_streamer.active())
|
|
return;
|
|
// the terrain loaded from the model is taken back as a whole
|
|
if (nmt_busy() && false == m_history_busy)
|
|
return;
|
|
if (m_streamer.recording())
|
|
{
|
|
if (terrain_brush() && mouseHold && false == m_history_busy)
|
|
return; // the stroke goes on
|
|
auto change{m_streamer.end_change()};
|
|
if (false == change.empty())
|
|
{
|
|
trim_history();
|
|
EditorSnapshot snap;
|
|
snap.action = EditorSnapshot::Action::Terrain;
|
|
snap.node_name = STR("terrain");
|
|
if (false == change.chunks.empty())
|
|
{
|
|
auto const centre{heightmap::chunk_corner(change.chunks.begin()->first) + glm::dvec2{heightmap::chunk_size * 0.5}};
|
|
snap.position = {centre.x, 0.0, centre.y};
|
|
}
|
|
snap.terrain = std::make_shared<terrain_streamer::change const>(std::move(change));
|
|
m_history.push_back(std::move(snap));
|
|
g_redo.clear();
|
|
}
|
|
}
|
|
m_streamer.begin_change();
|
|
}
|
|
|
|
void editor_mode::restore_terrain(EditorSnapshot &Snapshot)
|
|
{
|
|
if (Snapshot.terrain == nullptr)
|
|
return;
|
|
auto opposite{m_streamer.restore(*Snapshot.terrain)};
|
|
Snapshot.terrain = std::make_shared<terrain_streamer::change const>(std::move(opposite));
|
|
forget_ground();
|
|
m_water_selected = -1;
|
|
m_water_material_of = -1;
|
|
}
|
|
|
|
void editor_mode::undo_last()
|
|
{
|
|
first_step_done(first_step::undo);
|
|
// the warning by the cursor told of the step taken back now: "Ctrl+Z takes it back" is done
|
|
ui()->drop_refusal();
|
|
// a change of the terrain made a moment ago is a step of its own before it's taken back
|
|
m_history_busy = true;
|
|
terrain_history_step();
|
|
m_history_busy = false;
|
|
// the changes made together are taken back together, and their models are the selection again
|
|
std::vector<scene::basic_node *> touched;
|
|
while (false == m_history.empty())
|
|
{
|
|
auto const joined{m_history.back().joined};
|
|
undo_one();
|
|
if (m_node != nullptr && std::find(touched.begin(), touched.end(), m_node) == touched.end())
|
|
touched.push_back(m_node);
|
|
if (false == joined)
|
|
break;
|
|
}
|
|
if (touched.size() > 1)
|
|
{
|
|
// the one with the gizmo was recorded first, so it's taken back last
|
|
m_node = touched.back();
|
|
m_selection.assign(touched.begin(), touched.end() - 1);
|
|
ui()->set_node(m_node);
|
|
}
|
|
}
|
|
|
|
std::string editor_mode::refused(std::string Text)
|
|
{
|
|
ui()->set_status(Text, true);
|
|
return Text;
|
|
}
|
|
|
|
void editor_mode::drop_step(std::size_t const Step)
|
|
{
|
|
if (Step == 0 || m_history.size() != Step)
|
|
return;
|
|
auto const redo{g_redo.size()};
|
|
undo_one();
|
|
if (g_redo.size() > redo)
|
|
g_redo.erase(g_redo.begin() + redo, g_redo.end());
|
|
}
|
|
|
|
void editor_mode::undo_one()
|
|
{
|
|
if (m_history.empty())
|
|
return;
|
|
|
|
m_nmt_state.restoring = true;
|
|
struct restored
|
|
{
|
|
bool &flag;
|
|
~restored() { flag = false; }
|
|
} const restoring{m_nmt_state.restoring};
|
|
EditorSnapshot snap = m_history.back();
|
|
m_history.pop_back();
|
|
|
|
if (snap.action == EditorSnapshot::Action::Terrain)
|
|
{
|
|
restore_terrain(snap);
|
|
g_redo.push_back(std::move(snap));
|
|
return;
|
|
}
|
|
|
|
if (snap.action == EditorSnapshot::Action::Kilometrage)
|
|
{
|
|
restore_kilometrage(snap);
|
|
g_redo.push_back(std::move(snap));
|
|
return;
|
|
}
|
|
|
|
if (snap.action == EditorSnapshot::Action::Bend)
|
|
{
|
|
restore_bend(snap, true);
|
|
g_redo.push_back(std::move(snap));
|
|
return;
|
|
}
|
|
|
|
if (false == snap.sweeps.empty() || false == snap.sweeps_toggled.empty())
|
|
{
|
|
restore_sweeps(snap);
|
|
g_redo.push_back(std::move(snap));
|
|
return;
|
|
}
|
|
|
|
if (false == snap.instances.empty() || false == snap.directives.empty())
|
|
{
|
|
restore_includes(snap);
|
|
if (snap.action != EditorSnapshot::Action::TrackEdit)
|
|
{
|
|
g_redo.push_back(std::move(snap));
|
|
return;
|
|
}
|
|
}
|
|
|
|
if (snap.instance != 0)
|
|
{
|
|
restore_include(snap);
|
|
g_redo.push_back(std::move(snap));
|
|
return;
|
|
}
|
|
|
|
if (snap.action == EditorSnapshot::Action::TrackEdit)
|
|
{
|
|
restore_track_snapshot(snap, g_redo, true);
|
|
return;
|
|
}
|
|
|
|
if (snap.action == EditorSnapshot::Action::RoadEdit)
|
|
{
|
|
restore_road_snapshot(snap, g_redo, true);
|
|
return;
|
|
}
|
|
|
|
if (snap.action == EditorSnapshot::Action::Array)
|
|
{
|
|
restore_array_snapshot(std::move(snap), g_redo, true);
|
|
return;
|
|
}
|
|
|
|
if (snap.action == EditorSnapshot::Action::Delete)
|
|
{
|
|
// undo delete -> recreate model
|
|
EditorSnapshot redoSnap;
|
|
redoSnap.action = EditorSnapshot::Action::Delete;
|
|
redoSnap.node_name = snap.node_name;
|
|
redoSnap.serialized = snap.serialized;
|
|
redoSnap.position = snap.position;
|
|
redoSnap.node_ptr = nullptr;
|
|
redoSnap.uuid = snap.uuid;
|
|
redoSnap.layer = snap.layer;
|
|
redoSnap.joined = snap.joined;
|
|
g_redo.push_back(std::move(redoSnap));
|
|
|
|
TAnimModel *created = simulation::State.create_model(snap.serialized, snap.node_name, snap.position);
|
|
if (created)
|
|
{
|
|
scene::Layers.move(created, snap.layer); // back to the layer it was deleted from, rather than the active one
|
|
created->location(snap.position);
|
|
created->Angles(snap.rotation);
|
|
m_node = created;
|
|
m_node->uuid = snap.uuid; // restore original UUID for better tracking (not strictly necessary)
|
|
add_to_hierarchy(created);
|
|
// a node without a name can be found for the redo only this way
|
|
g_redo.back().node_ptr = created;
|
|
ui()->set_node(m_node);
|
|
}
|
|
return;
|
|
}
|
|
|
|
scene::basic_node *target = find_node_by_any(snap.node_ptr, snap.uuid.to_string(), snap.node_name);
|
|
if (!target)
|
|
return;
|
|
|
|
EditorSnapshot current;
|
|
current.action = snap.action;
|
|
current.joined = snap.joined;
|
|
current.node_name = snap.node_name;
|
|
current.node_ptr = target;
|
|
current.layer = target->layer();
|
|
current.position = target->location();
|
|
if (auto *model = dynamic_cast<TAnimModel *>(target))
|
|
{
|
|
current.rotation = model->Angles();
|
|
current.scale = model->Scale();
|
|
}
|
|
else
|
|
current.rotation = glm::vec3(0.0f);
|
|
g_redo.push_back(std::move(current));
|
|
|
|
if (snap.action == EditorSnapshot::Action::Add)
|
|
{
|
|
// undo add -> delete the instance
|
|
if (auto *model = dynamic_cast<TAnimModel *>(target))
|
|
{
|
|
|
|
erase_model(model);
|
|
m_node = nullptr;
|
|
ui()->set_node(nullptr);
|
|
}
|
|
return;
|
|
}
|
|
|
|
target->location(snap.position);
|
|
|
|
if (auto *model = dynamic_cast<TAnimModel *>(target))
|
|
{
|
|
glm::vec3 cur = model->Angles();
|
|
glm::vec3 delta = snap.rotation - cur;
|
|
m_editor.rotate(target, delta, 0);
|
|
model->Scale(snap.scale);
|
|
}
|
|
|
|
m_node = target;
|
|
ui()->set_node(m_node);
|
|
}
|
|
|
|
void editor_mode::redo_last()
|
|
{
|
|
// a change of the terrain made since the undo goes to the history, and the redo steps are dropped with it
|
|
m_history_busy = true;
|
|
terrain_history_step();
|
|
m_history_busy = false;
|
|
// the first of the changes made together is on the top, the others follow it
|
|
std::vector<scene::basic_node *> touched;
|
|
do
|
|
{
|
|
redo_one();
|
|
if (m_node != nullptr && std::find(touched.begin(), touched.end(), m_node) == touched.end())
|
|
touched.push_back(m_node);
|
|
} while (false == g_redo.empty() && g_redo.back().joined);
|
|
if (touched.size() > 1)
|
|
{
|
|
m_node = touched.front();
|
|
m_selection.assign(touched.begin() + 1, touched.end());
|
|
ui()->set_node(m_node);
|
|
}
|
|
}
|
|
|
|
void editor_mode::redo_one()
|
|
{
|
|
if (g_redo.empty())
|
|
return;
|
|
|
|
m_nmt_state.restoring = true;
|
|
struct restored
|
|
{
|
|
bool &flag;
|
|
~restored() { flag = false; }
|
|
} const restoring{m_nmt_state.restoring};
|
|
EditorSnapshot snap = g_redo.back();
|
|
g_redo.pop_back();
|
|
|
|
if (snap.action == EditorSnapshot::Action::Terrain)
|
|
{
|
|
restore_terrain(snap);
|
|
m_history.push_back(std::move(snap));
|
|
return;
|
|
}
|
|
|
|
if (snap.action == EditorSnapshot::Action::Kilometrage)
|
|
{
|
|
restore_kilometrage(snap);
|
|
m_history.push_back(std::move(snap));
|
|
return;
|
|
}
|
|
|
|
if (snap.action == EditorSnapshot::Action::Bend)
|
|
{
|
|
restore_bend(snap, false);
|
|
m_history.push_back(std::move(snap));
|
|
return;
|
|
}
|
|
|
|
if (false == snap.sweeps.empty() || false == snap.sweeps_toggled.empty())
|
|
{
|
|
restore_sweeps(snap);
|
|
m_history.push_back(std::move(snap));
|
|
return;
|
|
}
|
|
|
|
if (false == snap.instances.empty() || false == snap.directives.empty())
|
|
{
|
|
restore_includes(snap);
|
|
if (snap.action != EditorSnapshot::Action::TrackEdit)
|
|
{
|
|
m_history.push_back(std::move(snap));
|
|
return;
|
|
}
|
|
}
|
|
|
|
if (snap.instance != 0)
|
|
{
|
|
restore_include(snap);
|
|
m_history.push_back(std::move(snap));
|
|
return;
|
|
}
|
|
|
|
if (snap.action == EditorSnapshot::Action::TrackEdit)
|
|
{
|
|
restore_track_snapshot(snap, m_history, false);
|
|
return;
|
|
}
|
|
|
|
if (snap.action == EditorSnapshot::Action::RoadEdit)
|
|
{
|
|
restore_road_snapshot(snap, m_history, false);
|
|
return;
|
|
}
|
|
|
|
if (snap.action == EditorSnapshot::Action::Array)
|
|
{
|
|
restore_array_snapshot(std::move(snap), m_history, false);
|
|
return;
|
|
}
|
|
|
|
// handle delete redo (re-delete) separately
|
|
if (snap.action == EditorSnapshot::Action::Delete)
|
|
{
|
|
EditorSnapshot hist;
|
|
hist.action = snap.action;
|
|
hist.node_name = snap.node_name;
|
|
hist.serialized = snap.serialized;
|
|
hist.position = snap.position;
|
|
hist.uuid = snap.uuid;
|
|
hist.layer = snap.layer;
|
|
hist.joined = snap.joined;
|
|
m_history.push_back(std::move(hist));
|
|
|
|
// NOTE: located the way other steps do it, as the name alone doesn't lead to a node which has none
|
|
scene::basic_node *target = find_node_by_any(snap.node_ptr, snap.uuid.to_string(), snap.node_name);
|
|
if (target)
|
|
{
|
|
if (auto *model = dynamic_cast<TAnimModel *>(target))
|
|
{
|
|
erase_model(model);
|
|
m_node = nullptr;
|
|
ui()->set_node(nullptr);
|
|
}
|
|
}
|
|
return;
|
|
}
|
|
|
|
scene::basic_node *target = find_node_by_any(snap.node_ptr, snap.uuid.to_string(), snap.node_name);
|
|
|
|
EditorSnapshot hist;
|
|
hist.action = snap.action;
|
|
hist.joined = snap.joined;
|
|
hist.node_name = snap.node_name;
|
|
hist.node_ptr = target;
|
|
|
|
if (target)
|
|
{
|
|
hist.position = target->location();
|
|
if (auto *model = dynamic_cast<TAnimModel *>(target))
|
|
{
|
|
hist.rotation = model->Angles();
|
|
hist.scale = model->Scale();
|
|
}
|
|
hist.uuid = snap.uuid;
|
|
}
|
|
m_history.push_back(std::move(hist));
|
|
|
|
if (snap.action == EditorSnapshot::Action::Add)
|
|
{
|
|
TAnimModel *created = simulation::State.create_model(snap.serialized, snap.node_name, snap.position);
|
|
if (created)
|
|
{
|
|
scene::Layers.move(created, snap.layer);
|
|
created->location(snap.position);
|
|
created->Angles(snap.rotation);
|
|
created->Scale(snap.scale);
|
|
m_node = created;
|
|
m_node->uuid = snap.uuid;
|
|
ui()->set_node(m_node);
|
|
if (!m_history.empty())
|
|
m_history.back().node_ptr = created;
|
|
}
|
|
return;
|
|
}
|
|
|
|
if (!target)
|
|
return;
|
|
|
|
// apply redo position
|
|
target->location(snap.position);
|
|
if (auto *model = dynamic_cast<TAnimModel *>(target))
|
|
{
|
|
glm::vec3 cur = model->Angles();
|
|
glm::vec3 delta = snap.rotation - cur;
|
|
m_editor.rotate(target, delta, 0);
|
|
model->Scale(snap.scale);
|
|
}
|
|
|
|
m_node = target;
|
|
ui()->set_node(m_node);
|
|
}
|
|
|
|
bool editor_mode::update()
|
|
{
|
|
frame_steps steps;
|
|
Global.editor_tracks = (current_work_area() == work_area::tracks);
|
|
selftest_step();
|
|
steps.step("selftest");
|
|
// the drives of the switches go to the tips of their blades once, as the templates of the scenery are known
|
|
if (false == m_drives_checked)
|
|
{
|
|
EditorIncludes.start();
|
|
if (EditorIncludes.scanned())
|
|
{
|
|
m_drives_checked = true;
|
|
if (auto const moved{drives_to_blade_tips()}; moved > 0)
|
|
{
|
|
auto const text{format(STR_P("The drive of %zu switch is moved to the tips of its blades", "The drives of %zu switches are moved to the tips of their blades", static_cast<long long>(moved)), moved)};
|
|
ui()->set_status(text, false);
|
|
WriteLog("Editor: " + text, logtype::generic);
|
|
}
|
|
}
|
|
}
|
|
// after the tool has told its own status
|
|
if (false == m_orphan_note.empty())
|
|
{
|
|
ui()->set_notice(m_orphan_note);
|
|
WriteLog("Editor: " + m_orphan_note);
|
|
m_orphan_note.clear();
|
|
}
|
|
if (m_vehicle.take_leave())
|
|
{
|
|
Application.pop_mode();
|
|
return true;
|
|
}
|
|
|
|
steps.step("start");
|
|
Timer::UpdateTimers(true);
|
|
move_thrown_switches();
|
|
|
|
simulation::State.update_clocks();
|
|
simulation::Environment.update();
|
|
// bindings are matched with the objects by their locations, before anything gets moved
|
|
if (false == m_bindings_loaded && simulation::is_ready)
|
|
infra_load();
|
|
// the templates are looked for in the background from the start, for the tools to have them at hand
|
|
if (simulation::is_ready)
|
|
{
|
|
EditorIncludes.start();
|
|
EditorIncludes.poll();
|
|
}
|
|
|
|
auto const deltarealtime = Timer::GetDeltaRenderTime();
|
|
// the whole frame before, drawing included: one slow where its update wasn't took the time drawing
|
|
if (deltarealtime > 0.15 && simulation::is_ready)
|
|
WriteLog("Editor: slow frame before, " + std::to_string(static_cast<int>(deltarealtime * 1000.0)) + " ms in all", logtype::generic);
|
|
|
|
// reconcile camera fly-mode with the real right-button state. ImGui is always fed the button
|
|
// events (even when it captures the mouse), so io.MouseDown[1] is authoritative; if a release
|
|
// was swallowed by an ImGui window while flying, force the editor out of fly-mode here so the
|
|
// camera doesn't get stuck spinning with a hidden cursor.
|
|
if (!ImGui::GetIO().MouseDown[1] && m_input.mouse.button(GLFW_MOUSE_BUTTON_RIGHT) == GLFW_PRESS)
|
|
{
|
|
m_input.mouse.button(GLFW_MOUSE_BUTTON_RIGHT, GLFW_RELEASE);
|
|
Application.set_cursor(GLFW_CURSOR_NORMAL);
|
|
}
|
|
if (m_ortho_pan && !ImGui::GetIO().MouseDown[2])
|
|
ortho_pan_stop();
|
|
|
|
// same for the left button (brush / sculpt / click placement). the UI filter in the application
|
|
// uses io.WantCaptureMouse from the previous frame, so a press on a panel the cursor has just
|
|
// moved onto can leak into the viewport, and its release is then swallowed by the UI; the brush
|
|
// would keep painting with the button up. by now ImGui has processed this frame's input, so
|
|
// MouseDown is the real button state and MouseDownOwned tells whether the press hit the UI.
|
|
// (pick callbacks queued by such a press are discarded separately, see viewport_click())
|
|
if (mouseHold && (!ImGui::GetIO().MouseDown[0] || !viewport_click()))
|
|
{
|
|
mouseHold = false;
|
|
m_dragging = false;
|
|
m_input.mouse.button(GLFW_MOUSE_BUTTON_LEFT, GLFW_RELEASE);
|
|
}
|
|
terrain_history_step();
|
|
steps.step("simulation");
|
|
|
|
// fixed step render time routines (50 Hz)
|
|
fTime50Hz += deltarealtime; // accumulate even when paused to keep frame reads stable
|
|
while (fTime50Hz >= 1.0 / 50.0)
|
|
{
|
|
#ifdef _WIN32
|
|
Console::Update();
|
|
#endif
|
|
m_userinterface->update();
|
|
|
|
if (mouseHold)
|
|
{
|
|
// process continuous brush placement
|
|
if(ui()->mode() == nodebank_panel::BRUSH)
|
|
handle_brush_mouse_hold(GLFW_REPEAT, GLFW_MOUSE_BUTTON_LEFT);
|
|
}
|
|
|
|
// decelerate camera velocity with thresholding
|
|
Camera.Velocity *= 0.65f;
|
|
if (std::abs(Camera.Velocity.x) < 0.01)
|
|
Camera.Velocity.x = 0.0;
|
|
if (std::abs(Camera.Velocity.y) < 0.01)
|
|
Camera.Velocity.y = 0.0;
|
|
if (std::abs(Camera.Velocity.z) < 0.01)
|
|
Camera.Velocity.z = 0.0;
|
|
|
|
fTime50Hz -= 1.0 / 50.0;
|
|
|
|
}
|
|
|
|
steps.step("ui");
|
|
// variable step routines
|
|
update_camera(deltarealtime);
|
|
steps.step("camera");
|
|
|
|
// drop the selection if its layer was hidden or locked in the meantime
|
|
if (m_node != nullptr && false == scene::Layers.editable(m_node))
|
|
{
|
|
m_node = nullptr;
|
|
m_dragging = false;
|
|
ui()->set_node(nullptr);
|
|
}
|
|
if (m_instance != 0 && false == scene::Layers.removable(m_instance))
|
|
{
|
|
select_include(0);
|
|
}
|
|
if (m_include.changed)
|
|
{
|
|
// a parameter of the selected include was changed in the node properties
|
|
m_include.changed = false;
|
|
apply_include();
|
|
}
|
|
if (false == m_include.active && false == m_gizmo_using)
|
|
{
|
|
m_include_gesture = false;
|
|
}
|
|
// the gizmo let go of a signal while it wasn't drawn
|
|
if (false == m_gizmo_using)
|
|
signal_gizmo_end();
|
|
// models replaced after changes of includes are destroyed once the renderer can't have them among its pick candidates
|
|
for (auto &retired : m_retired)
|
|
{
|
|
if (--retired.second <= 0)
|
|
{
|
|
simulation::Instances.purge(retired.first);
|
|
}
|
|
}
|
|
m_retired.erase(std::remove_if(m_retired.begin(), m_retired.end(), [](std::pair<TAnimModel *, int> const &Retired) { return Retired.second <= 0; }), m_retired.end());
|
|
|
|
simulation::Region->update_sounds();
|
|
audio::renderer.update(Global.iPause ? 0.0 : deltarealtime);
|
|
|
|
GfxRenderer->Update(deltarealtime);
|
|
steps.step("renderer");
|
|
|
|
simulation::is_ready = true;
|
|
|
|
// note: the streamer is advanced centrally in the application main loop (so it runs in every
|
|
// mode), using the published Global.pCamera; nothing to do here
|
|
|
|
// the brush of the terrain works while the left mouse button is held
|
|
if (terrain_brush() && mouseHold)
|
|
handle_terrain_brush(deltarealtime);
|
|
else
|
|
m_terrain_stroke = false;
|
|
if (m_terrain_open)
|
|
draw_terrain_overlay();
|
|
|
|
// --- geoportal orthophoto: streamed around the camera, drawn beneath the other overlays ---
|
|
// chunks of the terrain come from the files and from the model: the imagery lying at guessed heights goes onto them
|
|
// and so do the squares of the model it lies on meanwhile
|
|
auto const resident{m_streamer.resident()};
|
|
auto const waiting{m_nmt.waiting()};
|
|
if (resident > m_ortho_resident || waiting < m_ortho_waiting)
|
|
{
|
|
m_orthophoto.ground_arrived();
|
|
for (auto &layer : m_wms)
|
|
layer->ground_arrived();
|
|
}
|
|
m_ortho_resident = resident;
|
|
m_ortho_waiting = waiting;
|
|
steps.step("terrain");
|
|
m_orthophoto.update(Camera.Pos);
|
|
steps.step("orthophoto");
|
|
update_wms_layers();
|
|
steps.step("wms");
|
|
nmt_update();
|
|
keep_nmt_settings();
|
|
steps.step("nmt");
|
|
// what's drawn over the 3d view stays in it, the docks around it are see-through a little
|
|
auto *background{ImGui::GetBackgroundDrawList(ImGui::GetMainViewport())};
|
|
background->PushClipRect(ImVec2(editor_ui::view_min().x, editor_ui::view_min().y), ImVec2(editor_ui::view_max().x, editor_ui::view_max().y), true);
|
|
draw_orthophoto();
|
|
draw_nmt_pending();
|
|
area_update();
|
|
draw_download_area();
|
|
steps.step("imagery");
|
|
|
|
// --- ImGuizmo: in-viewport transform gizmo for the selected node ---
|
|
render_gizmo();
|
|
// the tools, the gizmo modes and the axes over the 3d view
|
|
render_viewport_overlays();
|
|
m_ride.draw_hud();
|
|
|
|
render_track_inspector();
|
|
steps.step("inspector");
|
|
if (ui()->mode() == nodebank_panel::TRACK)
|
|
{
|
|
draw_track_lines();
|
|
draw_track_labels();
|
|
draw_track_legend();
|
|
}
|
|
else if (Global.EditorOrtho && Global.EditorOrthoTracks > 1)
|
|
draw_track_lines();
|
|
if (selected_track())
|
|
draw_track_overlay();
|
|
if (route_active())
|
|
draw_route_overlay();
|
|
if (ui()->mode() == nodebank_panel::TRACK && m_track_tab == track_tab::straights)
|
|
draw_straights_overlay();
|
|
steps.step("track lines");
|
|
if (ui()->mode() == nodebank_panel::TRACK)
|
|
{
|
|
if (m_track_box.active && false == ImGui::GetIO().MouseDown[0])
|
|
finish_track_box();
|
|
update_track_hover();
|
|
steps.step("hover");
|
|
point_drag_update();
|
|
switch_slide_update();
|
|
draw_switch_slide();
|
|
if (m_track_tab == track_tab::turntable)
|
|
draw_turntable_overlay();
|
|
if (m_track_tab == track_tab::signals)
|
|
{
|
|
signal_refresh();
|
|
signal_move_update();
|
|
draw_signal_overlay();
|
|
}
|
|
m_parallel.draw_overlay();
|
|
if (m_track_tab == track_tab::lineside)
|
|
{
|
|
m_hekto.draw_overlay();
|
|
m_fouling.draw_overlay();
|
|
m_vehicle.draw_overlay();
|
|
}
|
|
render_track_context();
|
|
steps.step("context");
|
|
update_build_tools();
|
|
steps.step("laying");
|
|
tape_update();
|
|
update_track_intent();
|
|
steps.step("intent");
|
|
draw_track_hover();
|
|
draw_track_set();
|
|
draw_track_spread();
|
|
draw_build_overlay();
|
|
steps.step("laying drawn");
|
|
draw_blade_tips();
|
|
draw_track_intent();
|
|
draw_tape();
|
|
steps.step("track drawn");
|
|
m_speed.update();
|
|
steps.step("speed");
|
|
m_joints.update();
|
|
steps.step("joints");
|
|
if (m_nmt_state.grade_lines_dirty)
|
|
{
|
|
m_nmt_state.grade_lines_dirty = false;
|
|
grade_lines_store();
|
|
}
|
|
m_nmt_state.grade_line_replaced.clear();
|
|
m_srk.update();
|
|
kilometrage::follow(m_track_edits);
|
|
m_km.update();
|
|
steps.step("srk km");
|
|
draw_track_hints();
|
|
draw_empty_scenery_hint();
|
|
draw_profile_overlay();
|
|
draw_grade_line_pick();
|
|
draw_infra_overlay();
|
|
m_speed.draw_overlay();
|
|
m_joints.draw_overlay();
|
|
m_srk.draw_overlay();
|
|
m_km.draw_overlay();
|
|
steps.step("overlays");
|
|
}
|
|
else
|
|
{
|
|
draw_sweep_overlay();
|
|
m_sweep.open = false;
|
|
bend_drag_update();
|
|
draw_bend_overlay();
|
|
}
|
|
m_gauge.update();
|
|
m_gauge.render_windows();
|
|
m_minimap.render_windows();
|
|
|
|
// roads: trajectories of the lanes, and the tools of the road window
|
|
update_road_tool();
|
|
draw_road_overlay();
|
|
// the roads and the terrain are fields of work, their tools are drawn in the tool options window in place of the edit mode ones
|
|
ui()->set_workspace(m_terrain_open ? editor_ui::workspace::terrain : m_roadtool.window ? editor_ui::workspace::roads : editor_ui::workspace::none);
|
|
|
|
steps.step("roads");
|
|
// --- array: the one made last is kept in line with its settings ---
|
|
update_array();
|
|
|
|
// --- area fill: outline overlay while the mode is active (its settings are drawn in the node bank window) ---
|
|
if (ui()->mode() == nodebank_panel::FILL)
|
|
draw_area_fill_outline();
|
|
background->PopClipRect();
|
|
draw_ortho_compass();
|
|
|
|
render_new_scenery_popup();
|
|
render_open_scenery_popup();
|
|
render_shortcuts_window();
|
|
render_first_steps();
|
|
render_nmt_prompt();
|
|
render_nmt_banner();
|
|
render_nmt_buried();
|
|
render_empty_scenery_hint();
|
|
render_outside_area_hint();
|
|
render_switch_designer();
|
|
render_environment_window();
|
|
draw_selection_overlay();
|
|
render_context_menu();
|
|
steps.step("windows");
|
|
|
|
// --- ImGui: Editor Settings & History windows ---
|
|
if(m_settings_open)
|
|
render_settings();
|
|
|
|
if(!m_change_history) return true;
|
|
|
|
render_change_history();
|
|
|
|
return true;
|
|
}
|
|
|
|
void editor_mode::render_settings()
|
|
{
|
|
ImGui::Begin((std::string(STR_C("Editor Settings")) + "###editorsettings").c_str(), &m_settings_open);
|
|
|
|
if (ImGui::BeginTabBar("##editorsettings"))
|
|
{
|
|
if (ImGui::BeginTabItem(STR_C("General")))
|
|
{
|
|
ImGui::TextUnformatted(STR_C("Camera movement"));
|
|
|
|
const char *schemes[] = {STR_C("WSAD (new)"), STR_C("Arrows (legacy)")};
|
|
int current = EditorSettings.movement() == editorSettings::movement_scheme::legacy ? 1 : 0;
|
|
if (ImGui::Combo("##movement_scheme", ¤t, schemes, IM_ARRAYSIZE(schemes)))
|
|
{
|
|
EditorSettings.movement(current == 1 ? editorSettings::movement_scheme::legacy
|
|
: editorSettings::movement_scheme::wsad);
|
|
m_input.keyboard.apply_scheme();
|
|
EditorSettings.save();
|
|
}
|
|
|
|
ImGui::Separator();
|
|
ImGui::Checkbox(STR_C("Transform gizmo (ImGuizmo)"), &m_gizmo_enabled);
|
|
|
|
ImGui::Separator();
|
|
ImGui::TextUnformatted(STR_C("Colours of the editor"));
|
|
const char *palettes[] = {STR_C("Green, as the rest of the simulator"), STR_C("Amber, of the editor")};
|
|
int palette = std::clamp(EditorSettings.palette(), 0, 1);
|
|
if (ImGui::Combo("##palette", &palette, palettes, IM_ARRAYSIZE(palettes)))
|
|
{
|
|
EditorSettings.palette(palette);
|
|
EditorSettings.save();
|
|
}
|
|
ImGui::EndTabItem();
|
|
}
|
|
ImGui::EndTabBar();
|
|
}
|
|
|
|
ImGui::End();
|
|
}
|
|
|
|
namespace
|
|
{
|
|
// point spacings offered for the chunks, as the user reads them
|
|
char const *spacing_label(float const Spacing)
|
|
{
|
|
return Spacing < 0.75f ? "0.5 m" : Spacing < 1.5f ? "1 m" : Spacing < 3.f ? "2 m" : "5 m";
|
|
}
|
|
|
|
bool spacing_combo(char const *Label, float &Spacing)
|
|
{
|
|
bool changed = false;
|
|
ImGui::SetNextItemWidth(120.0f);
|
|
if (ImGui::BeginCombo(Label, spacing_label(Spacing)))
|
|
{
|
|
for (auto const spacing : heightmap::spacings)
|
|
if (ImGui::Selectable(spacing_label(spacing), spacing == Spacing))
|
|
{
|
|
Spacing = spacing;
|
|
changed = true;
|
|
}
|
|
ImGui::EndCombo();
|
|
}
|
|
return changed;
|
|
}
|
|
|
|
} // namespace
|
|
|
|
void editor_mode::render_terrain_ui()
|
|
{
|
|
if (false == m_streamer.active())
|
|
{
|
|
ImGui::TextUnformatted(STR_C("The scenery has no terrain yet"));
|
|
// the terrain model makes the terrain itself
|
|
if (ImGui::CollapsingHeader(STR_C("Terrain model (NMT)"), ImGuiTreeNodeFlags_DefaultOpen))
|
|
render_nmt_ui();
|
|
ImGui::Spacing();
|
|
ImGui::TextDisabled("%s", STR_C("Or without the real ground:"));
|
|
if (ImGui::Button(STR_C("Make an empty, flat terrain")))
|
|
ensure_terrain();
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("Kept in the folder terrain/<name of the scenery>/ and written there with the scenery (Ctrl+S)"));
|
|
return;
|
|
}
|
|
// the real terrain first, open: the tracks put onto it from there
|
|
if (nmt_busy())
|
|
ImGui::SetNextItemOpen(true);
|
|
if (ImGui::CollapsingHeader(STR_C("Terrain model (NMT)"), ImGuiTreeNodeFlags_DefaultOpen))
|
|
render_nmt_ui();
|
|
|
|
// the tools are chosen in the toolbar, here are their settings
|
|
if (ImGui::CollapsingHeader(STR_C("Chunks"), m_terrain_tool == terrain_tool::chunks ? ImGuiTreeNodeFlags_DefaultOpen : 0))
|
|
{
|
|
if (spacing_combo(STR_C("Point spacing"), m_terrain_spacing))
|
|
m_streamer.default_spacing(m_terrain_spacing);
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("Spacing of the grid points of the chunks made.\n"
|
|
"A chunk is 250 x 250 m; finer grids take more memory and time to draw."));
|
|
ImGui::SetNextItemWidth(120.0f);
|
|
ImGui::InputFloat(STR_C("Base height (m)"), &m_terrain_baseheight, 0.0f, 0.0f, "%.2f");
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("Height of the chunks made where there's no ground under them"));
|
|
ImGui::SetNextItemWidth(120.0f);
|
|
ImGui::InputInt(STR_C("Chunks along a side"), &m_terrain_add_count);
|
|
m_terrain_add_count = std::clamp(m_terrain_add_count, 1, 8);
|
|
ImGui::SameLine();
|
|
if (ImGui::Button(STR_C("Add around the camera")))
|
|
add_chunks_around(m_terrain_add_count);
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("Makes the chunks missing around the camera, shaped as the ground under them"));
|
|
render_ground_conversion();
|
|
if (dynamic_cast<TAnimModel *>(m_node) != nullptr)
|
|
{
|
|
if (ImGui::Button(STR_C("Capture the selected model as terrain")))
|
|
capture_terrain();
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("The chunks under the model take its shape, and the model is removed"));
|
|
}
|
|
}
|
|
|
|
if (ImGui::CollapsingHeader(STR_C("Chunk resolution"), m_terrain_tool == terrain_tool::spacing ? ImGuiTreeNodeFlags_DefaultOpen : 0))
|
|
{
|
|
// chunks removed since are no longer selected
|
|
for (auto it = m_terrain_selection.begin(); it != m_terrain_selection.end();)
|
|
it = m_streamer.exists(*it) ? std::next(it) : m_terrain_selection.erase(it);
|
|
if (m_terrain_selection.empty())
|
|
ImGui::TextWrapped("%s", STR_C("No chunk selected. With the Point spacing tool LMB selects the clicked chunk, Ctrl+LMB adds one or takes it away."));
|
|
else
|
|
{
|
|
bool coarser = false;
|
|
std::size_t points = 0, after = 0;
|
|
int const cells = heightmap::cells_for(m_terrain_convert_spacing);
|
|
ImGui::BeginChild("##chunkselection", ImVec2(0.0f, ImGui::GetTextLineHeightWithSpacing() * std::min<float>(6.0f, static_cast<float>(m_terrain_selection.size()) + 0.5f)), true);
|
|
for (auto const &key : m_terrain_selection)
|
|
{
|
|
auto const centre = heightmap::chunk_corner(key) + glm::dvec2{heightmap::chunk_size * 0.5};
|
|
auto const *chunk = m_streamer.terrain_at(centre.x, centre.y);
|
|
if (chunk == nullptr)
|
|
{
|
|
ImGui::TextDisabled(STR_C("%d,%d: not loaded"), key.first, key.second);
|
|
continue;
|
|
}
|
|
auto const &data = chunk->data();
|
|
coarser |= cells < data.cells;
|
|
points += static_cast<std::size_t>(data.side()) * data.side();
|
|
after += static_cast<std::size_t>(cells + 1) * (cells + 1);
|
|
auto const paint = data.paint > 0 ? format(STR_C(", paint every %.2f m"), heightmap::chunk_size / data.paint) : std::string(STR_C(", one material"));
|
|
auto const touchups = data.adjust.empty() ? std::string() : std::string(STR_C(", touch-ups"));
|
|
ImGui::Text("%d,%d: %s%s%s", key.first, key.second, spacing_label(static_cast<float>(data.spacing())), paint.c_str(), touchups.c_str());
|
|
}
|
|
ImGui::EndChild();
|
|
spacing_combo(STR_C("Convert to"), m_terrain_convert_spacing);
|
|
ImGui::SameLine();
|
|
if (ImGui::Button(STR_C("Convert")))
|
|
convert_selected_chunks();
|
|
ImGui::SameLine();
|
|
if (ImGui::Button(STR_C("Clear the selection")))
|
|
m_terrain_selection.clear();
|
|
if (ImGui::Button(STR_C("Remove the selected (Del)")))
|
|
remove_selected_chunks();
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("Takes the selected chunks out of the terrain of the scenery, and out of its files on save; Ctrl+Z brings them back"));
|
|
ImGui::Checkbox(STR_C("Paint every 0.5 m with 0.5 m spacing"), &m_terrain_convert_paint);
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("Chunks converted to 0.5 m get their paint samples every 0.5 m as well (every metre otherwise),\n"
|
|
"so the materials can be painted as finely as the ground is shaped"));
|
|
if (points > 0)
|
|
ImGui::TextDisabled(STR_C("Grid points: %zu -> %zu"), points, after);
|
|
if (coarser)
|
|
ImGui::TextWrapped("%s", STR_C("A coarser grid can't hold the shapes smaller than its spacing: they're averaged out. "
|
|
"The edges of the chunks keep their heights, so the neighbours still meet them. Ctrl+Z takes it back."));
|
|
}
|
|
}
|
|
|
|
if (terrain_brush() && ImGui::CollapsingHeader(STR_C("Brush"), ImGuiTreeNodeFlags_DefaultOpen))
|
|
{
|
|
ImGui::SetNextItemWidth(120.0f);
|
|
ImGui::DragFloat(STR_C("Radius (m)"), &m_terrain_brush_radius, 0.25f, 0.5f, 500.0f, "%.1f");
|
|
m_terrain_brush_radius = std::max(0.5f, m_terrain_brush_radius);
|
|
ImGui::SetNextItemWidth(120.0f);
|
|
ImGui::DragFloat(STR_C("Strength"), &m_terrain_brush_strength, 0.05f, 0.05f, 50.0f, "%.2f");
|
|
m_terrain_brush_strength = std::max(0.05f, m_terrain_brush_strength);
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("Sculpting: metres per second at the middle of the brush; smoothing, levelling, painting and restoring: how fast they work"));
|
|
if (m_terrain_tool == terrain_tool::sculpt || m_terrain_tool == terrain_tool::smooth || m_terrain_tool == terrain_tool::level)
|
|
{
|
|
auto touchup = m_streamer.touch_up();
|
|
if (ImGui::Checkbox(STR_C("Touch up over the tracks"), &touchup))
|
|
m_streamer.touch_up(touchup);
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("On: the brush shapes the terrain as it's seen, also where the tracks (modifiers) shape it;\n"
|
|
"the changes there are kept as touch-ups over the modifiers, and stay when the track changes.\n"
|
|
"The Restore tool takes them back.\n"
|
|
"Off: the brush shapes only the ground under the modifiers, the tracks keep their formation and slopes."));
|
|
}
|
|
if (m_terrain_tool == terrain_tool::level)
|
|
{
|
|
ImGui::SetNextItemWidth(120.0f);
|
|
ImGui::DragFloat(STR_C("Target height (m)"), &m_terrain_target, 0.05f, -1000.0f, 5000.0f, "%.2f");
|
|
ImGui::SameLine();
|
|
if (ImGui::Button(m_terrain_picking ? STR_C("Click in the view...") : STR_C("Pick")))
|
|
m_terrain_picking = false == m_terrain_picking;
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("The next click takes the height of whatever is under the cursor: terrain, a track, a model.\nCtrl+LMB does the same at any time"));
|
|
char const *modes[]{STR_C("Raise and lower"), STR_C("Only raise"), STR_C("Only lower")};
|
|
ImGui::SetNextItemWidth(160.0f);
|
|
ImGui::Combo("##levelmode", &m_terrain_level_mode, modes, IM_ARRAYSIZE(modes));
|
|
ImGui::Checkbox(STR_C("Target where the stroke starts"), &m_terrain_target_from_stroke);
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("Each stroke takes the height of the terrain under the cursor where it starts as its target,\nand drags it along: the ground stroked over is levelled with that point"));
|
|
}
|
|
}
|
|
|
|
if (ImGui::CollapsingHeader(STR_C("Materials"), m_terrain_tool == terrain_tool::paint ? ImGuiTreeNodeFlags_DefaultOpen : 0))
|
|
{
|
|
auto const &layers{m_streamer.manifest().layers};
|
|
m_terrain_layer = std::clamp(m_terrain_layer, 0, static_cast<int>(layers.size()) - 1);
|
|
for (std::size_t i = 0; i < layers.size(); ++i)
|
|
{
|
|
auto label{layers[i].size > 0.f ? format("%zu: %s (%.1f m)", i, layers[i].material.c_str(), layers[i].size) : format("%zu: %s", i, layers[i].material.c_str())};
|
|
if (layers[i].rotation != 0.f)
|
|
label += format(STR_C(", turned %.0f°"), layers[i].rotation);
|
|
if (ImGui::Selectable(label.c_str(), static_cast<int>(i) == m_terrain_layer))
|
|
m_terrain_layer = static_cast<int>(i);
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("New chunks are covered with the first material. A texture dragged from the browser onto an entry of the palette takes its place"));
|
|
// a material dropped on an entry takes its place, on every chunk painted with it
|
|
std::string dropped;
|
|
if (material_drop(dropped))
|
|
m_streamer.layer_material(static_cast<std::uint16_t>(i), dropped);
|
|
}
|
|
if (false == layers.empty())
|
|
{
|
|
// the values are kept while dragged and given to the palette once the dragging ends;
|
|
// read back from the palette every frame, the release would hand it the old value
|
|
if (false == m_terrain_layer_size_dragged)
|
|
m_terrain_layer_size = layers[m_terrain_layer].size;
|
|
ImGui::SetNextItemWidth(120.0f);
|
|
ImGui::DragFloat(STR_C("Repeats every (m)"), &m_terrain_layer_size, 0.1f, 0.0f, 200.0f, "%.1f");
|
|
m_terrain_layer_size_dragged = ImGui::IsItemActive();
|
|
if (ImGui::IsItemDeactivatedAfterEdit())
|
|
m_streamer.layer_size(static_cast<std::uint16_t>(m_terrain_layer), m_terrain_layer_size);
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("Metres the textures of the chosen material repeat at; 0: as the material gives it, or 8 m"));
|
|
if (false == m_terrain_layer_rotation_dragged)
|
|
m_terrain_layer_rotation = layers[m_terrain_layer].rotation;
|
|
ImGui::SetNextItemWidth(120.0f);
|
|
ImGui::SliderFloat(STR_C("Turned by (deg)"), &m_terrain_layer_rotation, -180.0f, 180.0f, "%.0f");
|
|
m_terrain_layer_rotation_dragged = ImGui::IsItemActive();
|
|
if (ImGui::IsItemDeactivatedAfterEdit())
|
|
m_streamer.layer_rotation(static_cast<std::uint16_t>(m_terrain_layer), m_terrain_layer_rotation);
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("Angle the textures of the chosen material are turned by, on every chunk painted with it.\n"
|
|
"Ctrl+click to type it. To have the material turned in one place only, fill it there with an angle of its own."));
|
|
}
|
|
texture_field(STR_C("Material"), 160.0f, m_terrain_material, IM_ARRAYSIZE(m_terrain_material), terrain_texture_offer(nullptr));
|
|
ImGui::SameLine();
|
|
if (ImGui::Button(STR_C("Add to the palette")) && m_terrain_material[0] != '\0')
|
|
m_terrain_layer = m_streamer.layer(m_terrain_material, m_terrain_material_size);
|
|
ImGui::TextDisabled("%s", STR_C("A chunk holds up to 8 materials"));
|
|
}
|
|
|
|
if (ImGui::CollapsingHeader(STR_C("Fill"), m_terrain_tool == terrain_tool::fill ? ImGuiTreeNodeFlags_DefaultOpen : 0))
|
|
{
|
|
auto const &layers{m_streamer.manifest().layers};
|
|
if (false == layers.empty())
|
|
{
|
|
auto const &chosen{layers[std::clamp(m_terrain_layer, 0, static_cast<int>(layers.size()) - 1)]};
|
|
ImGui::Text(STR_C("Material: %s (chosen in the palette above)"), chosen.material.c_str());
|
|
}
|
|
ImGui::Text(STR_C("Outline: %zu points"), m_paint_outline.size());
|
|
ImGui::SetNextItemWidth(120.0f);
|
|
ImGui::DragFloat(STR_C("Edge blur (m)"), &m_paint_feather, 0.1f, 0.0f, 100.0f, m_paint_feather > 0.0f ? "%.1f" : STR_C("sharp"));
|
|
m_paint_feather = std::max(0.0f, m_paint_feather);
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("Metres across the outline the material blends in over, half of them inside the area.\n"
|
|
"0: a sharp edge, as sharp as the paint samples go: every metre, or every 0.5 m in chunks converted to 0.5 m with fine paint"));
|
|
ImGui::SetNextItemWidth(120.0f);
|
|
ImGui::SliderFloat(STR_C("Texture turned by (deg)"), &m_paint_rotation, -180.0f, 180.0f, "%.0f");
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("The area gets the material turned by this angle: an entry of the palette with the material at that angle\n"
|
|
"is used, or added. Ctrl+click to type it"));
|
|
ImGui::BeginDisabled(m_paint_outline.size() < 3 || layers.empty());
|
|
if (ImGui::Button(STR_C("Fill the area")))
|
|
fill_terrain_area();
|
|
ImGui::EndDisabled();
|
|
ImGui::SameLine();
|
|
if (ImGui::Button(STR_C("Clear the outline##fill")))
|
|
m_paint_outline.clear();
|
|
}
|
|
|
|
if (ImGui::CollapsingHeader(STR_C("Water"), m_terrain_tool == terrain_tool::water ? ImGuiTreeNodeFlags_DefaultOpen : 0))
|
|
{
|
|
if (m_terrain_tool == terrain_tool::water)
|
|
{
|
|
ImGui::Text(STR_C("Outline: %zu points"), m_water_points.size());
|
|
ImGui::SetNextItemWidth(120.0f);
|
|
if (ImGui::DragFloat(STR_C("Level (m)"), &m_water_level, 0.01f, -1000.0f, 5000.0f, "%.2f"))
|
|
m_water_level_edited = true;
|
|
texture_field(STR_C("Material##water"), 160.0f, m_water_material, IM_ARRAYSIZE(m_water_material), terrain_texture_offer(STR_C("The default water material")));
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip(STR_C("The default one: %s, the water material of the terrain"), m_streamer.manifest().water_material.c_str());
|
|
ImGui::BeginDisabled(m_water_points.size() < 3);
|
|
if (ImGui::Button(STR_C("Make the water")))
|
|
{
|
|
auto water{m_streamer.water()};
|
|
heightmap::water_body body;
|
|
body.name = format("water %zu", water.size() + 1);
|
|
body.level = m_water_level;
|
|
body.material = m_water_material;
|
|
for (auto const &point : m_water_points)
|
|
body.outline.emplace_back(point.x, point.z);
|
|
water.push_back(std::move(body));
|
|
m_streamer.water(std::move(water));
|
|
m_water_selected = static_cast<int>(m_streamer.water().size()) - 1;
|
|
m_water_points.clear();
|
|
m_water_level_edited = false;
|
|
}
|
|
ImGui::EndDisabled();
|
|
ImGui::SameLine();
|
|
if (ImGui::Button(STR_C("Clear the outline")))
|
|
{
|
|
m_water_points.clear();
|
|
m_water_level_edited = false;
|
|
}
|
|
}
|
|
auto const &water{m_streamer.water()};
|
|
std::optional<std::size_t> removed;
|
|
std::optional<std::pair<std::size_t, std::string>> dropped;
|
|
for (std::size_t i = 0; i < water.size(); ++i)
|
|
{
|
|
ImGui::PushID(static_cast<int>(i));
|
|
auto const material = water[i].material.empty() ? std::string(STR_C("default material")) : water[i].material;
|
|
if (ImGui::Selectable(format(STR_C("%s, %.2f m, %zu points, %s"), water[i].name.c_str(), water[i].level, water[i].outline.size(), material.c_str()).c_str(), static_cast<int>(i) == m_water_selected))
|
|
m_water_selected = static_cast<int>(i);
|
|
// a texture dropped on an entry becomes the material of that water
|
|
std::string name;
|
|
if (material_drop(name))
|
|
dropped = std::make_pair(i, name);
|
|
ImGui::PopID();
|
|
}
|
|
if (dropped)
|
|
{
|
|
auto changed{water};
|
|
changed[dropped->first].material = dropped->second;
|
|
m_streamer.water(std::move(changed));
|
|
m_water_selected = static_cast<int>(dropped->first);
|
|
m_water_material_of = -1;
|
|
}
|
|
if (m_water_selected >= 0 && m_water_selected < static_cast<int>(water.size()))
|
|
{
|
|
// the level is changed in the water once the dragging ends
|
|
if (false == m_water_level_dragged)
|
|
m_water_selected_level = static_cast<float>(water[m_water_selected].level);
|
|
ImGui::SetNextItemWidth(120.0f);
|
|
ImGui::DragFloat(STR_C("Level of the chosen (m)"), &m_water_selected_level, 0.01f, -1000.0f, 5000.0f, "%.2f");
|
|
m_water_level_dragged = ImGui::IsItemActive();
|
|
if (ImGui::IsItemDeactivatedAfterEdit())
|
|
{
|
|
auto changed{water};
|
|
changed[m_water_selected].level = m_water_selected_level;
|
|
m_streamer.water(std::move(changed));
|
|
}
|
|
// the material and the repeat of its texture, changed once the field is left (or a texture dropped on it)
|
|
if (m_water_material_of != m_water_selected)
|
|
{
|
|
std::snprintf(m_water_selected_material, sizeof(m_water_selected_material), "%s", water[m_water_selected].material.c_str());
|
|
m_water_selected_size = water[m_water_selected].size;
|
|
m_water_material_of = m_water_selected;
|
|
}
|
|
bool retexture = false;
|
|
retexture |= texture_field(STR_C("Material of the chosen"), 160.0f, m_water_selected_material, IM_ARRAYSIZE(m_water_selected_material), terrain_texture_offer(STR_C("The default water material")));
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip(STR_C("Chosen from the textures, or dragged from the texture browser.\nThe default one: %s, the water material of the terrain"), m_streamer.manifest().water_material.c_str());
|
|
ImGui::SetNextItemWidth(120.0f);
|
|
ImGui::DragFloat(STR_C("Texture repeats every (m)##water"), &m_water_selected_size, 0.1f, 0.0f, 500.0f, "%.1f");
|
|
m_water_selected_size = std::max(0.0f, m_water_selected_size);
|
|
retexture |= ImGui::IsItemDeactivatedAfterEdit();
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("Metres the texture of the water repeats at; 0: as the material gives it, or 8 m"));
|
|
if (retexture)
|
|
{
|
|
auto changed{water};
|
|
changed[m_water_selected].material = m_water_selected_material;
|
|
changed[m_water_selected].size = m_water_selected_size;
|
|
m_streamer.water(std::move(changed));
|
|
}
|
|
if (ImGui::Button(STR_C("Remove the chosen water")))
|
|
removed = static_cast<std::size_t>(m_water_selected);
|
|
}
|
|
if (removed)
|
|
{
|
|
auto changed{water};
|
|
changed.erase(changed.begin() + *removed);
|
|
m_streamer.water(std::move(changed));
|
|
m_water_selected = -1;
|
|
m_water_material_of = -1;
|
|
}
|
|
// the material of the bodies of water which don't name their own
|
|
auto defaultmaterial{m_streamer.manifest().water_material};
|
|
auto const redefault{texture_field(STR_C("Default water material"), 160.0f, defaultmaterial, terrain_texture_offer(nullptr))};
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("Material of the bodies of water which don't name their own"));
|
|
if (redefault)
|
|
m_streamer.water_material(defaultmaterial);
|
|
}
|
|
|
|
if (ImGui::CollapsingHeader(STR_C("Modifiers")))
|
|
{
|
|
auto const &modifiers{m_streamer.modifiers()};
|
|
if (modifiers.empty())
|
|
ImGui::TextWrapped("%s", STR_C("None. The vertical profile of the tracks makes them: the terrain follows the formation and the slopes of the route."));
|
|
std::optional<std::string> removed, baked;
|
|
for (auto const &modifier : modifiers)
|
|
{
|
|
ImGui::PushID(modifier.name.c_str());
|
|
ImGui::TextUnformatted(format(STR_C("%s, %zu points"), modifier.name.c_str(), modifier.points.size()).c_str());
|
|
ImGui::SameLine();
|
|
if (ImGui::SmallButton(STR_C("Bake")))
|
|
baked = modifier.name;
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("The ground keeps the shape the modifier gives it, and the modifier is removed:\n"
|
|
"from then on the terrain there is shaped by hand like anywhere else, and no longer follows the track"));
|
|
ImGui::SameLine();
|
|
if (ImGui::SmallButton(STR_C("Remove")))
|
|
removed = modifier.name;
|
|
ImGui::PopID();
|
|
}
|
|
if (auto const touchups = m_streamer.touched_up(); touchups > 0)
|
|
ImGui::TextDisabled(STR_C("Touch-ups over the modifiers: %zu points (of the chunks in memory)"), touchups);
|
|
if (baked)
|
|
{
|
|
m_streamer.bake_modifier(*baked);
|
|
ground_tiles.clear();
|
|
forget_ground_shapes();
|
|
}
|
|
if (removed)
|
|
{
|
|
m_streamer.remove_modifier(*removed);
|
|
ground_tiles.clear();
|
|
forget_ground_shapes();
|
|
}
|
|
}
|
|
|
|
auto const files{format(STR_C("Folder: %s"), m_streamer.directory().c_str()) + "\n" + format(STR_C("Chunks in memory: %zu%s"), m_streamer.resident(), m_streamer.modified() ? STR_C(", changes not saved yet") : "")};
|
|
auto const drawing{ImGui::CollapsingHeader(STR_C("Drawing and files"))};
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", files.c_str());
|
|
if (drawing)
|
|
{
|
|
ImGui::TextDisabled("%s", files.c_str());
|
|
auto detail{m_streamer.detail()};
|
|
ImGui::SetNextItemWidth(160.0f);
|
|
if (ImGui::SliderFloat(STR_C("Detail"), &detail, 30.0f, 400.0f, "%.0f"))
|
|
m_streamer.detail(detail);
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("How far the full grid of the chunks reaches: metres of distance per metre of the drawn grid. Further away the grid is coarser"));
|
|
bool compress{m_streamer.manifest().compress};
|
|
if (ImGui::Checkbox(STR_C("Compress the files (zstd)"), &compress))
|
|
m_streamer.compress(compress);
|
|
ImGui::TextDisabled("%s", STR_C("The terrain is written with the scenery (Ctrl+S)."));
|
|
}
|
|
if (false == m_terrain_status.empty())
|
|
ImGui::TextWrapped("%s", m_terrain_status.c_str());
|
|
}
|
|
|
|
void editor_mode::draw_terrain_overlay()
|
|
{
|
|
if (false == m_streamer.active())
|
|
return;
|
|
screen_projection const projection;
|
|
auto *drawlist = ImGui::GetBackgroundDrawList();
|
|
glm::dvec3 const offset = GfxRenderer->Mouse_Position();
|
|
bool const hovering = glm::length(offset) > 1e-3 && false == ImGui::GetIO().WantCaptureMouse;
|
|
glm::dvec3 const cursor = Camera.Pos + offset;
|
|
auto const ground = [&](double const X, double const Z, double const Fallback) {
|
|
double height;
|
|
return m_streamer.height_at(X, Z, height) ? height : Fallback;
|
|
};
|
|
auto const polyline = [&](std::vector<glm::dvec3> const &Points, ImU32 const Color, bool const Closed, float const Thickness) {
|
|
auto const count = Points.size();
|
|
for (std::size_t i = 0; i + (Closed ? 0 : 1) < count; ++i)
|
|
{
|
|
ImVec2 from, to;
|
|
if (projection.project(Points[i], from) && projection.project(Points[(i + 1) % count], to))
|
|
drawlist->AddLine(from, to, Color, Thickness);
|
|
}
|
|
};
|
|
|
|
if (terrain_brush() && hovering)
|
|
{
|
|
std::vector<glm::dvec3> circle;
|
|
for (int i = 0; i < 64; ++i)
|
|
{
|
|
auto const angle = i * 6.283185307179586 / 64.0;
|
|
auto const x = cursor.x + std::cos(angle) * m_terrain_brush_radius;
|
|
auto const z = cursor.z + std::sin(angle) * m_terrain_brush_radius;
|
|
circle.emplace_back(x, ground(x, z, cursor.y) + 0.1, z);
|
|
}
|
|
auto const color = m_terrain_tool == terrain_tool::paint ? IM_COL32(120, 230, 120, 220)
|
|
: m_terrain_tool == terrain_tool::smooth ? IM_COL32(120, 200, 255, 220)
|
|
: m_terrain_tool == terrain_tool::restore ? IM_COL32(230, 120, 230, 220)
|
|
: IM_COL32(255, 180, 80, 220);
|
|
polyline(circle, color, true, 2.0f);
|
|
if (m_terrain_tool == terrain_tool::level)
|
|
{
|
|
// the target: the rim of the brush at its height, joined with the ground, and the height by the cursor
|
|
auto const target = static_cast<double>(m_terrain_target);
|
|
std::vector<glm::dvec3> level;
|
|
for (auto const &point : circle)
|
|
level.emplace_back(point.x, target, point.z);
|
|
ImU32 const levelcolor = IM_COL32(255, 230, 90, 230);
|
|
polyline(level, levelcolor, true, 1.5f);
|
|
for (std::size_t i = 0; i < circle.size(); i += circle.size() / 8)
|
|
{
|
|
ImVec2 from, to;
|
|
if (projection.project(circle[i], from) && projection.project(level[i], to))
|
|
drawlist->AddLine(from, to, IM_COL32(255, 230, 90, 120), 1.0f);
|
|
}
|
|
ImVec2 label;
|
|
if (projection.project(glm::dvec3{cursor.x, target, cursor.z}, label))
|
|
{
|
|
double ground{cursor.y};
|
|
m_streamer.height_at(cursor.x, cursor.z, ground);
|
|
auto const text = format("%.2f m (%+.2f)", target, target - ground);
|
|
drawlist->AddText(ImVec2(label.x + 12.0f, label.y - 8.0f), levelcolor, text.c_str());
|
|
}
|
|
}
|
|
}
|
|
// outline of a chunk, laid over the ground
|
|
auto const chunk_outline = [&](heightmap::chunk_key const &Key, double const Fallback, ImU32 const Color, float const Thickness) {
|
|
auto const low = heightmap::chunk_corner(Key);
|
|
std::vector<glm::dvec3> square;
|
|
auto const edge = [&](glm::dvec2 const &From, glm::dvec2 const &To) {
|
|
for (int i = 0; i < 25; ++i)
|
|
{
|
|
auto const point = From + (To - From) * (i / 25.0);
|
|
square.emplace_back(point.x, ground(point.x, point.y, Fallback) + 0.2, point.y);
|
|
}
|
|
};
|
|
auto const size = heightmap::chunk_size;
|
|
edge(low, low + glm::dvec2{size, 0.0});
|
|
edge(low + glm::dvec2{size, 0.0}, low + glm::dvec2{size});
|
|
edge(low + glm::dvec2{size}, low + glm::dvec2{0.0, size});
|
|
edge(low + glm::dvec2{0.0, size}, low);
|
|
polyline(square, Color, true, Thickness);
|
|
};
|
|
if (m_terrain_tool == terrain_tool::spacing)
|
|
for (auto const &key : m_terrain_selection)
|
|
chunk_outline(key, cursor.y, IM_COL32(90, 220, 255, 230), 3.0f);
|
|
if ((m_terrain_tool == terrain_tool::chunks || m_terrain_tool == terrain_tool::spacing) && hovering)
|
|
{
|
|
auto const key = heightmap::chunk_at(cursor.x, cursor.z);
|
|
auto const exists = m_streamer.exists(key);
|
|
chunk_outline(key, cursor.y, exists ? IM_COL32(255, 255, 255, 200) : IM_COL32(255, 230, 90, 200), 2.0f);
|
|
ImVec2 label;
|
|
if (exists && projection.project(cursor, label))
|
|
{
|
|
auto const *chunk = m_streamer.terrain_at(cursor.x, cursor.z);
|
|
if (chunk != nullptr)
|
|
{
|
|
auto const &data = chunk->data();
|
|
auto text = std::string(spacing_label(static_cast<float>(data.spacing())));
|
|
if (m_terrain_tool == terrain_tool::spacing)
|
|
{
|
|
if (data.paint > 0)
|
|
text += format(STR_C(", paint every %.2f m"), heightmap::chunk_size / data.paint);
|
|
if (m_terrain_selection.count(key) != 0)
|
|
text += STR(" (selected)");
|
|
}
|
|
drawlist->AddText(ImVec2(label.x + 14.0f, label.y - 14.0f), IM_COL32(255, 255, 255, 230), text.c_str());
|
|
}
|
|
}
|
|
}
|
|
// the bodies of water, and the one being outlined
|
|
auto const &water = m_streamer.water();
|
|
for (std::size_t i = 0; i < water.size(); ++i)
|
|
{
|
|
std::vector<glm::dvec3> outline;
|
|
for (auto const &point : water[i].outline)
|
|
outline.emplace_back(point.x, water[i].level, point.y);
|
|
polyline(outline, static_cast<int>(i) == m_water_selected ? IM_COL32(120, 200, 255, 255) : IM_COL32(60, 120, 220, 160), true, static_cast<int>(i) == m_water_selected ? 2.5f : 1.5f);
|
|
}
|
|
if (m_terrain_tool == terrain_tool::fill && false == m_paint_outline.empty())
|
|
{
|
|
// laid over the ground, the edges followed every few metres
|
|
std::vector<glm::dvec3> outline;
|
|
auto const closed = m_paint_outline.size() >= 3;
|
|
for (std::size_t i = 0; i + (closed ? 0 : 1) < m_paint_outline.size(); ++i)
|
|
{
|
|
auto const &from = m_paint_outline[i];
|
|
auto const &to = m_paint_outline[(i + 1) % m_paint_outline.size()];
|
|
auto const steps = std::clamp(static_cast<int>(glm::distance(glm::dvec2{from.x, from.z}, glm::dvec2{to.x, to.z}) / 4.0), 1, 200);
|
|
for (int k = 0; k < steps; ++k)
|
|
{
|
|
auto const point = from + (to - from) * (static_cast<double>(k) / steps);
|
|
outline.emplace_back(point.x, ground(point.x, point.z, point.y) + 0.15, point.z);
|
|
}
|
|
}
|
|
if (false == closed)
|
|
outline.push_back(m_paint_outline.back() + glm::dvec3{0.0, 0.15, 0.0});
|
|
polyline(outline, IM_COL32(250, 200, 90, 255), false, 2.0f);
|
|
for (auto const &point : m_paint_outline)
|
|
{
|
|
ImVec2 dot;
|
|
if (projection.project(point + glm::dvec3{0.0, 0.15, 0.0}, dot))
|
|
drawlist->AddCircleFilled(dot, 4.0f, IM_COL32(250, 200, 90, 255));
|
|
}
|
|
}
|
|
if (m_terrain_tool == terrain_tool::water && false == m_water_points.empty())
|
|
{
|
|
std::vector<glm::dvec3> outline;
|
|
for (auto const &point : m_water_points)
|
|
outline.emplace_back(point.x, m_water_level, point.z);
|
|
polyline(outline, IM_COL32(120, 220, 255, 255), m_water_points.size() >= 3, 2.0f);
|
|
for (auto const &point : outline)
|
|
{
|
|
ImVec2 dot;
|
|
if (projection.project(point, dot))
|
|
drawlist->AddCircleFilled(dot, 4.0f, IM_COL32(120, 220, 255, 255));
|
|
}
|
|
}
|
|
}
|
|
|
|
void editor_mode::load_orthophoto_settings()
|
|
{
|
|
std::string const scenery = scenery_stem();
|
|
if (scenery == m_orthophoto_scenery)
|
|
return;
|
|
m_orthophoto_scenery = scenery;
|
|
// a scenery of its own: nobody chose for it yet, unless the user or the scenery keeps the orthophoto on or off
|
|
m_orthophoto_chosen = false;
|
|
// the height of the terrain model against the tracks of the scenery, as it was fitted or typed in last
|
|
m_nmt_state.offset = 0.0;
|
|
m_nmt_state.fitted = false;
|
|
std::as_const(EditorSettings).terrain_model_offset(scenery, m_nmt_state.offset, m_nmt_state.fitted);
|
|
|
|
auto const &stored = EditorSettings.orthophoto();
|
|
editor_orthophoto::config config = m_orthophoto.settings();
|
|
config.radius = stored.radius;
|
|
config.height = stored.height;
|
|
config.opacity = stored.opacity;
|
|
config.year = stored.year;
|
|
config.hires = stored.hires;
|
|
config.drape = stored.drape;
|
|
config.lift = stored.lift;
|
|
config.in_scene = stored.in_scene;
|
|
config.north = 0.0;
|
|
config.east = 0.0;
|
|
m_georeference_read = false;
|
|
read_georeference();
|
|
if (false == std::as_const(EditorSettings).orthophoto_origin(scenery, config.north, config.east) && m_georeference)
|
|
{
|
|
config.north = m_georeference_origin.x;
|
|
config.east = m_georeference_origin.y;
|
|
}
|
|
auto enabled{m_orthophoto.enabled()};
|
|
m_orthophoto_mark.clear();
|
|
if (auto const marked{scene::Layers.empty() ? std::vector<std::string>{} : scene::Layers.marked(scene::layer_handle{1}, "//$o")}; false == marked.empty() && editor_orthophoto::read_mark(marked.front(), config, enabled))
|
|
{
|
|
m_orthophoto_mark = marked.front();
|
|
m_orthophoto.enabled(enabled);
|
|
m_orthophoto_chosen = true;
|
|
WriteLog(format("Editor: the map settings of the scenery, orthophoto %s", enabled ? "on" : "off"));
|
|
}
|
|
// the user's choice stands over the scenery's; turned on only where the scenery lies on the map, a fictional one has nothing to
|
|
// show, and there it's left to the terrain model once the scenery is placed
|
|
if (auto const on{stored.on}; on.has_value() && (false == *on || config.north != 0.0 || config.east != 0.0))
|
|
{
|
|
m_orthophoto.enabled(*on);
|
|
m_orthophoto_chosen = true;
|
|
WriteLog(format("Editor: the orthophoto %s, as the user left it", *on ? "on" : "off"));
|
|
}
|
|
m_orthophoto.settings(config);
|
|
m_orthophoto_origin_edit = {config.north, config.east};
|
|
// the area the imagery and the terrain model are downloaded in, none in a scenery which has none
|
|
m_orthophoto_area_mark = scene::Layers.empty() ? std::vector<std::string>{} : scene::Layers.marked(scene::layer_handle{1}, "//$z");
|
|
m_orthophoto.area(editor_orthophoto::read_area(m_orthophoto_area_mark));
|
|
if (false == m_orthophoto.area().empty())
|
|
WriteLog(format("Editor: the download area of the scenery, %zu points, %d tiles of the orthophoto", m_orthophoto.area().size(), m_orthophoto.stats().area_tiles));
|
|
}
|
|
|
|
void editor_mode::save_orthophoto_settings()
|
|
{
|
|
editor_orthophoto::config const &config = m_orthophoto.settings();
|
|
auto &stored = EditorSettings.orthophoto();
|
|
stored.radius = config.radius;
|
|
stored.height = config.height;
|
|
stored.opacity = config.opacity;
|
|
stored.year = config.year;
|
|
stored.hires = config.hires;
|
|
stored.drape = config.drape;
|
|
stored.lift = config.lift;
|
|
stored.in_scene = config.in_scene;
|
|
if (config.north != 0.0 || config.east != 0.0)
|
|
EditorSettings.orthophoto_origin(m_orthophoto_scenery, config.north, config.east);
|
|
EditorSettings.save();
|
|
}
|
|
|
|
void editor_mode::choose_orthophoto(bool const On)
|
|
{
|
|
m_orthophoto.enabled(On);
|
|
m_orthophoto_chosen = true;
|
|
EditorSettings.orthophoto().on = On;
|
|
EditorSettings.save();
|
|
}
|
|
|
|
void editor_mode::keep_nmt_settings()
|
|
{
|
|
// not while a number is being typed in, which changes it at every key
|
|
if (ImGui::IsAnyItemActive())
|
|
return;
|
|
auto const &state{m_nmt_state};
|
|
auto &stored{EditorSettings.terrain_model()};
|
|
auto changed{stored.band != state.band || stored.around != m_terrain_add_count || stored.shape != state.shape || stored.follow != state.follow};
|
|
stored.band = state.band;
|
|
stored.around = m_terrain_add_count;
|
|
stored.shape = state.shape;
|
|
stored.follow = state.follow;
|
|
// the offset of the model is the scenery's, fitted to its tracks or typed in
|
|
if (false == m_orthophoto_scenery.empty())
|
|
{
|
|
double offset{0.0};
|
|
bool fitted{false};
|
|
std::as_const(EditorSettings).terrain_model_offset(m_orthophoto_scenery, offset, fitted);
|
|
if (offset != state.offset || fitted != state.fitted)
|
|
{
|
|
EditorSettings.terrain_model_offset(m_orthophoto_scenery, state.offset, state.fitted);
|
|
changed = true;
|
|
}
|
|
}
|
|
if (changed)
|
|
EditorSettings.save();
|
|
}
|
|
|
|
void editor_mode::render_orthophoto_ui()
|
|
{
|
|
load_orthophoto_settings();
|
|
|
|
editor_orthophoto::config config = m_orthophoto.settings();
|
|
bool changed = false; // apply to the layer
|
|
bool persist = false; // and store in the editor settings
|
|
|
|
ImGui::TextUnformatted(STR_C("Scenery origin (0,0,0) in PUWG 1992 / EPSG:2180"));
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("PUWG 1992 (EPSG:2180): the coordinate system of the maps of Poland, in metres; the numbers as on geoportal.gov.pl"));
|
|
// geodetic convention, as displayed by geoportal.gov.pl: X grows north, Y grows east.
|
|
// applied once editing ends, so half-typed numbers don't trigger downloads
|
|
ImGui::SetNextItemWidth(160.0f);
|
|
ImGui::InputDouble(STR_C("X (northing, m)"), &m_orthophoto_origin_edit.x, 0.0, 0.0, "%.2f");
|
|
bool const northedited = ImGui::IsItemDeactivatedAfterEdit();
|
|
ImGui::SetNextItemWidth(160.0f);
|
|
ImGui::InputDouble(STR_C("Y (easting, m)"), &m_orthophoto_origin_edit.y, 0.0, 0.0, "%.2f");
|
|
bool const eastedited = ImGui::IsItemDeactivatedAfterEdit();
|
|
if (northedited || eastedited)
|
|
{
|
|
config.north = m_orthophoto_origin_edit.x;
|
|
config.east = m_orthophoto_origin_edit.y;
|
|
changed = true;
|
|
persist = true;
|
|
}
|
|
if (m_georeference)
|
|
{
|
|
ImGui::TextDisabled("%s", m_georeference_line.c_str());
|
|
ImGui::TextDisabled(STR_C("in the scenery file: Y (easting) %.0f m, X (northing) %.0f m"), m_georeference_origin.y, m_georeference_origin.x);
|
|
if (config.north != m_georeference_origin.x || config.east != m_georeference_origin.y)
|
|
{
|
|
ImGui::SameLine();
|
|
if (ImGui::SmallButton(STR_C("Use it")))
|
|
{
|
|
m_orthophoto_origin_edit.x = m_georeference_origin.x;
|
|
config.north = m_orthophoto_origin_edit.x;
|
|
m_orthophoto_origin_edit.y = m_georeference_origin.y;
|
|
config.east = m_orthophoto_origin_edit.y;
|
|
changed = true;
|
|
persist = true;
|
|
}
|
|
}
|
|
}
|
|
if (config.north == 0.0 && config.east == 0.0)
|
|
ImGui::TextColored(ImVec4(1.0f, 0.75f, 0.2f, 1.0f), STR_C("Enter the origin of this scenery first"));
|
|
else
|
|
ImGui::TextDisabled(STR_C("Camera at X %.1f Y %.1f"), config.north + Camera.Pos.z, config.east - Camera.Pos.x);
|
|
|
|
ImGui::Separator();
|
|
ImGui::SetNextItemWidth(160.0f);
|
|
changed |= ImGui::SliderInt(STR_C("Distance (tiles)"), &config.radius, 0, editor_orthophoto::max_radius);
|
|
persist |= ImGui::IsItemDeactivatedAfterEdit();
|
|
ImGui::SameLine();
|
|
int const span = static_cast<int>((2 * config.radius + 1) * editor_orthophoto::tile_size);
|
|
ImGui::TextDisabled("%d x %d m", span, span);
|
|
|
|
// ImGui 1.73 has no public disabled state yet, the internal item flag does the job
|
|
auto const begin_disabled = [](bool Disabled) {
|
|
if (!Disabled)
|
|
return;
|
|
ImGui::PushItemFlag(ImGuiItemFlags_Disabled, true);
|
|
ImGui::PushStyleVar(ImGuiStyleVar_Alpha, ImGui::GetStyle().Alpha * 0.5f);
|
|
};
|
|
auto const end_disabled = [](bool Disabled) {
|
|
if (!Disabled)
|
|
return;
|
|
ImGui::PopStyleVar();
|
|
ImGui::PopItemFlag();
|
|
};
|
|
|
|
auto const stats = m_orthophoto.stats();
|
|
if (stats.failed > 0 || stats.area_failed > 0)
|
|
{
|
|
ImGui::Text(STR_C("Tiles: %d shown, %d loading, %d failed"), stats.resident, stats.loading, stats.failed);
|
|
ImGui::SameLine();
|
|
if (ImGui::Button(STR_C("Retry")))
|
|
m_orthophoto.retry_failed();
|
|
}
|
|
|
|
ImGui::Separator();
|
|
render_download_area_ui(stats);
|
|
ImGui::Separator();
|
|
|
|
if (ImGui::TreeNode(STR_C("More settings")))
|
|
{
|
|
if (ImGui::Checkbox(STR_C("Fit to terrain"), &config.drape))
|
|
{
|
|
changed = true;
|
|
persist = true;
|
|
}
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip(STR_C("Lays the imagery onto the ground geometry (terrain shapes, terrain tile models, heightmap terrain).\n"
|
|
"Places without any ground use the height below."));
|
|
if (config.drape)
|
|
{
|
|
ImGui::SameLine();
|
|
if (ImGui::Button(STR_C("Refit")))
|
|
{
|
|
// the ground was edited: what's kept of it has to go as well
|
|
ground_tiles.clear();
|
|
forget_ground_shapes();
|
|
m_orthophoto.refit();
|
|
for (auto &layer : m_wms)
|
|
layer->refit();
|
|
}
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip(STR_C("Samples the ground again, after it was edited"));
|
|
}
|
|
|
|
begin_disabled(!config.drape);
|
|
ImGui::SetNextItemWidth(160.0f);
|
|
changed |= ImGui::DragFloat(STR_C("Lift above ground (m)"), &config.lift, 0.01f, 0.0f, 50.0f, "%.2f");
|
|
persist |= ImGui::IsItemDeactivatedAfterEdit();
|
|
end_disabled(!config.drape);
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip(STR_C("Raises the fitted imagery above the ground. Keep it below the objects you want to see:\n"
|
|
"in the scene everything lower than this ends up under the imagery."));
|
|
|
|
begin_disabled(config.drape);
|
|
ImGui::SetNextItemWidth(160.0f);
|
|
changed |= ImGui::DragFloat(STR_C("Height (m)"), &config.height, 0.1f, -1000.0f, 3000.0f, "%.2f");
|
|
persist |= ImGui::IsItemDeactivatedAfterEdit();
|
|
end_disabled(config.drape);
|
|
|
|
if (ImGui::Checkbox(STR_C("Covered by objects and terrain"), &config.in_scene))
|
|
{
|
|
changed = true;
|
|
persist = true;
|
|
}
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip(STR_C("Draws the imagery as part of the scene, so tracks, models and terrain in front of it hide it.\n"
|
|
"It is lit like the scene. Fully opaque, mouse placement lands on it as on any surface;\n"
|
|
"translucent, it doesn't catch the mouse.\n"
|
|
"Not available with the Better Renderer, which doesn't pick up geometry added in the editor."));
|
|
|
|
ImGui::SetNextItemWidth(160.0f);
|
|
changed |= ImGui::SliderFloat(STR_C("Opacity"), &config.opacity, 0.0f, 1.0f, "%.2f");
|
|
persist |= ImGui::IsItemDeactivatedAfterEdit();
|
|
if (config.in_scene && ImGui::IsItemHovered())
|
|
ImGui::SetTooltip(STR_C("In the scene the opacity is part of the textures: the tiles are read again from the cache\n"
|
|
"shortly after the slider stops, which takes a moment."));
|
|
|
|
// newest imagery, or the newest imagery taken up to the end of the selected year
|
|
int const thisyear = static_cast<int>(std::chrono::year_month_day{std::chrono::floor<std::chrono::days>(std::chrono::system_clock::now())}.year());
|
|
std::string const yearlabel = config.year ? std::to_string(config.year) : std::string(STR_C("Newest"));
|
|
ImGui::SetNextItemWidth(160.0f);
|
|
if (ImGui::BeginCombo(STR_C("Photo year"), yearlabel.c_str()))
|
|
{
|
|
if (ImGui::Selectable(STR_C("Newest"), config.year == 0))
|
|
{
|
|
config.year = 0;
|
|
changed = true;
|
|
persist = true;
|
|
}
|
|
for (int year = thisyear; year >= editor_orthophoto::oldest_year; --year)
|
|
{
|
|
if (ImGui::Selectable(std::to_string(year).c_str(), config.year == year))
|
|
{
|
|
config.year = year;
|
|
changed = true;
|
|
persist = true;
|
|
}
|
|
}
|
|
ImGui::EndCombo();
|
|
}
|
|
|
|
if (ImGui::Checkbox(STR_C("4K tiles where available"), &config.hires))
|
|
{
|
|
changed = true;
|
|
persist = true;
|
|
}
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip(STR_C("4096 px tiles (~6 cm/px) from the high-resolution orthophoto, for the tiles around the camera.\n"
|
|
"Areas it doesn't cover use the standard imagery. Each 4K tile takes ~85 MB of video memory."));
|
|
|
|
ImGui::Separator();
|
|
if (stats.failed == 0)
|
|
ImGui::Text(STR_C("Tiles: %d shown, %d loading, %d failed"), stats.resident, stats.loading, stats.failed);
|
|
if (!editor_orthophoto::can_download())
|
|
ImGui::TextDisabled(STR_C("This build has no HTTP client, only cached tiles are shown"));
|
|
ImGui::TextDisabled(STR_C("Cache: %s"), editor_orthophoto::cache_directory().c_str());
|
|
if (ImGui::Button(STR_C("Clear cache")))
|
|
m_orthophoto.clear_cache();
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip(STR_C("Deletes downloaded tiles from disk. They are fetched again around the camera."));
|
|
ImGui::TreePop();
|
|
}
|
|
|
|
if (changed)
|
|
m_orthophoto.settings(config);
|
|
if (persist)
|
|
save_orthophoto_settings();
|
|
|
|
ImGui::TextDisabled(STR_C("Imagery: GUGiK, geoportal.gov.pl"));
|
|
}
|
|
|
|
void editor_mode::draw_orthophoto()
|
|
{
|
|
if (false == m_orthophoto.enabled() && std::none_of(m_wms.begin(), m_wms.end(), [](auto const &Layer) { return Layer->enabled(); }))
|
|
return;
|
|
// the camera was just published to the renderer (update_camera), so build the view from it rather than
|
|
// from the renderer's previous frame; camera-relative rotation, same projection as the other overlays
|
|
glm::dmat4 viewmatrix{1.0};
|
|
Camera.SetMatrix(viewmatrix);
|
|
glm::mat4 const view = glm::mat4(glm::mat3(viewmatrix));
|
|
ImGuiIO const &io = ImGui::GetIO();
|
|
float const aspect = io.DisplaySize.y > 0.0f ? io.DisplaySize.x / io.DisplaySize.y : 1.0f;
|
|
auto const projection{editor_mode::projection_matrix(aspect) * view};
|
|
m_orthophoto.draw(projection, Camera.Pos, io.DisplaySize.x, io.DisplaySize.y);
|
|
// the WMS layers over it, the top one of the list last
|
|
for (auto layer{m_wms.rbegin()}; layer != m_wms.rend(); ++layer)
|
|
(*layer)->draw(projection, Camera.Pos, io.DisplaySize.x, io.DisplaySize.y);
|
|
}
|
|
|
|
void editor_mode::draw_ortho_compass() const
|
|
{
|
|
if (false == Global.EditorOrtho)
|
|
return;
|
|
screen_projection const projection;
|
|
ImVec2 north_from, north_to, east_from, east_to;
|
|
glm::dvec3 const eye{Camera.Pos};
|
|
if (false == projection.project(eye + glm::dvec3{0.0, 0.0, -80.0}, north_from) || false == projection.project(eye + glm::dvec3{0.0, 0.0, 80.0}, north_to) ||
|
|
false == projection.project(eye + glm::dvec3{80.0, 0.0, 0.0}, east_from) || false == projection.project(eye + glm::dvec3{-80.0, 0.0, 0.0}, east_to))
|
|
return;
|
|
auto const dir = [](ImVec2 const From, ImVec2 const To) {
|
|
ImVec2 const d{To.x - From.x, To.y - From.y};
|
|
auto const length{std::sqrt(d.x * d.x + d.y * d.y)};
|
|
return length > 1e-3f ? ImVec2{d.x / length, d.y / length} : ImVec2{0.0f, -1.0f};
|
|
};
|
|
auto const north{dir(north_from, north_to)};
|
|
auto const east{dir(east_from, east_to)};
|
|
ImVec2 const south{-north.x, -north.y};
|
|
ImVec2 const west{-east.x, -east.y};
|
|
|
|
ImGuiIO const &io = ImGui::GetIO();
|
|
float const radius{36.0f};
|
|
float const margin{16.0f};
|
|
// in the corner of the view, where the buttons of the toolbar and the hints along its bottom aren't
|
|
ImVec2 const center{editor_ui::view_max().x - margin - radius - 14.0f, editor_ui::view_max().y - margin - radius - 54.0f};
|
|
auto *drawlist{ImGui::GetForegroundDrawList()};
|
|
drawlist->AddCircleFilled(center, radius + 14.0f, IM_COL32(0, 0, 0, 180), 48);
|
|
drawlist->AddCircle(center, radius - 6.0f, IM_COL32(255, 255, 255, 50), 48, 1.2f);
|
|
drawlist->AddCircleFilled(center, 3.0f, IM_COL32(255, 255, 255, 200), 12);
|
|
|
|
auto const at = [&](ImVec2 const Unit, float const Length) { return ImVec2{center.x + Unit.x * Length, center.y + Unit.y * Length}; };
|
|
ImVec2 const side{-north.y * 5.0f, north.x * 5.0f};
|
|
drawlist->AddTriangleFilled(at(north, radius - 14.0f), ImVec2{center.x + side.x, center.y + side.y}, ImVec2{center.x - side.x, center.y - side.y}, IM_COL32(230, 70, 55, 255));
|
|
drawlist->AddTriangleFilled(at(south, radius - 18.0f), ImVec2{center.x + side.x, center.y + side.y}, ImVec2{center.x - side.x, center.y - side.y}, IM_COL32(210, 210, 210, 210));
|
|
|
|
auto const letter = [&](char const *Text, ImVec2 const Unit, ImU32 const Color) {
|
|
auto const size{ImGui::CalcTextSize(Text)};
|
|
auto const p{at(Unit, radius + 2.0f)};
|
|
drawlist->AddText(ImVec2(p.x - size.x * 0.5f, p.y - size.y * 0.5f), Color, Text);
|
|
};
|
|
letter("N", north, IM_COL32(255, 90, 70, 255));
|
|
letter("E", east, IM_COL32(230, 230, 230, 230));
|
|
letter("S", south, IM_COL32(190, 190, 190, 180));
|
|
letter("W", west, IM_COL32(230, 230, 230, 230));
|
|
}
|
|
|
|
void editor_mode::forget_ground()
|
|
{
|
|
ground_tiles.clear();
|
|
forget_ground_shapes();
|
|
}
|
|
|
|
void editor_mode::forget_ground_in(glm::dvec2 const &Min, glm::dvec2 const &Max)
|
|
{
|
|
for (auto tile{ground_tiles.begin()}; tile != ground_tiles.end();)
|
|
{
|
|
glm::dvec2 const low{tile->first.first * ground_tile_size, tile->first.second * ground_tile_size};
|
|
if (low.x <= Max.x && low.x + ground_tile_size >= Min.x && low.y <= Max.y && low.y + ground_tile_size >= Min.y)
|
|
tile = ground_tiles.erase(tile);
|
|
else
|
|
++tile;
|
|
}
|
|
}
|
|
|
|
editor_terrain *editor_mode::terrain_at(double X, double Z)
|
|
{
|
|
return m_streamer.terrain_at(X, Z);
|
|
}
|
|
|
|
std::vector<editor_terrain *> editor_mode::active_terrains() const
|
|
{
|
|
std::vector<editor_terrain *> out;
|
|
out.reserve(m_streamer.resident());
|
|
m_streamer.collect(out);
|
|
return out;
|
|
}
|
|
|
|
bool editor_mode::ensure_terrain()
|
|
{
|
|
if (m_streamer.active())
|
|
return true;
|
|
auto const name = scenery_stem();
|
|
if (name.empty())
|
|
return false;
|
|
m_streamer.open(name);
|
|
m_terrain_spacing = m_streamer.manifest().spacing;
|
|
return m_streamer.active();
|
|
}
|
|
|
|
bool editor_mode::add_chunk_from_ground(heightmap::chunk_key const &Key, float const Spacing, std::uint16_t const Layer)
|
|
{
|
|
if (m_streamer.exists(Key))
|
|
return false;
|
|
auto const low = heightmap::chunk_corner(Key);
|
|
auto const high = low + glm::dvec2{heightmap::chunk_size};
|
|
// the ground under the chunk, the edges of the neighbouring chunks included, so the new one meets them
|
|
std::vector<world_triangle> triangles;
|
|
gather_ground_triangles(low - glm::dvec2{1.0}, high + glm::dvec2{1.0}, true, 50.0f, triangles, true);
|
|
triangle_grid const ground(std::move(triangles), low - glm::dvec2{1.0}, high + glm::dvec2{1.0});
|
|
auto const cells = heightmap::cells_for(Spacing);
|
|
auto const side = static_cast<std::size_t>(cells) + 1;
|
|
auto const step = heightmap::chunk_size / cells;
|
|
std::vector<double> heights(side * side, 0.0);
|
|
std::vector<char> found(side * side, 0);
|
|
bool any = false;
|
|
for (std::size_t iz = 0; iz < side; ++iz)
|
|
for (std::size_t ix = 0; ix < side; ++ix)
|
|
{
|
|
auto const index = iz * side + ix;
|
|
if (ground.height_at(low.x + ix * step, low.y + iz * step, std::numeric_limits<double>::max(), heights[index]))
|
|
found[index] = 1, any = true;
|
|
}
|
|
// past the edge of the ground the chunk is carried on level with the nearest point of it
|
|
if (any)
|
|
fill_from_nearest(heights, found, side);
|
|
else
|
|
std::fill(heights.begin(), heights.end(), m_terrain_baseheight);
|
|
auto const added = m_streamer.add_chunk(Key.first, Key.second, Spacing, [&](double const X, double const Z) {
|
|
auto const ix = static_cast<std::size_t>(std::clamp<long>(std::lround((X - low.x) / step), 0, cells));
|
|
auto const iz = static_cast<std::size_t>(std::clamp<long>(std::lround((Z - low.y) / step), 0, cells));
|
|
return static_cast<float>(heights[iz * side + ix]);
|
|
}, Layer);
|
|
if (added)
|
|
{
|
|
ground_tiles.clear();
|
|
forget_ground_shapes();
|
|
}
|
|
return added;
|
|
}
|
|
|
|
void editor_mode::add_chunks_around(int const Count)
|
|
{
|
|
if (false == ensure_terrain())
|
|
return;
|
|
auto const centre = heightmap::chunk_at(Camera.Pos.x, Camera.Pos.z);
|
|
auto const first = -(Count - 1) / 2;
|
|
int made = 0;
|
|
for (int dz = 0; dz < Count; ++dz)
|
|
for (int dx = 0; dx < Count; ++dx)
|
|
if (add_chunk_from_ground({centre.first + first + dx, centre.second + first + dz}, m_terrain_spacing))
|
|
++made;
|
|
m_terrain_status = format(STR_C("%d chunks made"), made);
|
|
}
|
|
|
|
void editor_mode::handle_terrain_click(bool const Shift)
|
|
{
|
|
glm::dvec3 const offset = GfxRenderer->Mouse_Position();
|
|
if (glm::length(offset) < 1e-3)
|
|
return; // nothing under the cursor (yet)
|
|
glm::dvec3 const world = Camera.Pos + offset;
|
|
switch (m_terrain_tool)
|
|
{
|
|
case terrain_tool::chunks:
|
|
{
|
|
if (false == ensure_terrain())
|
|
return;
|
|
auto const key = heightmap::chunk_at(world.x, world.z);
|
|
if (Shift)
|
|
{
|
|
if (m_streamer.exists(key))
|
|
{
|
|
m_streamer.remove_chunk(key.first, key.second);
|
|
ground_tiles.clear();
|
|
forget_ground_shapes();
|
|
m_terrain_status = format(STR_C("Chunk %d,%d removed"), key.first, key.second);
|
|
}
|
|
return;
|
|
}
|
|
// a click on a chunk adds the neighbour by the nearest edge, a click outside fills the clicked place
|
|
auto target = key;
|
|
if (m_streamer.exists(key))
|
|
{
|
|
auto const low = heightmap::chunk_corner(key);
|
|
double const west = world.x - low.x, east = heightmap::chunk_size - west, south = world.z - low.y, north = heightmap::chunk_size - south;
|
|
double const nearest = std::min({west, east, south, north});
|
|
if (nearest == west)
|
|
--target.first;
|
|
else if (nearest == east)
|
|
++target.first;
|
|
else if (nearest == south)
|
|
--target.second;
|
|
else
|
|
++target.second;
|
|
}
|
|
m_terrain_status = add_chunk_from_ground(target, m_terrain_spacing) ? format(STR_C("Chunk %d,%d made"), target.first, target.second) : std::string(STR_C("There's a chunk there already"));
|
|
break;
|
|
}
|
|
case terrain_tool::spacing:
|
|
{
|
|
// a click selects the chunk, Ctrl adds it to the selection or takes it away
|
|
auto const key = heightmap::chunk_at(world.x, world.z);
|
|
if (false == m_streamer.exists(key))
|
|
{
|
|
if (false == Global.ctrlState)
|
|
m_terrain_selection.clear();
|
|
return;
|
|
}
|
|
if (false == Global.ctrlState)
|
|
m_terrain_selection = {key};
|
|
else if (m_terrain_selection.erase(key) == 0)
|
|
m_terrain_selection.insert(key);
|
|
m_terrain_status = format(STR_C("Chunks selected: %zu"), m_terrain_selection.size());
|
|
break;
|
|
}
|
|
case terrain_tool::fill:
|
|
{
|
|
if (Shift)
|
|
{
|
|
if (false == m_paint_outline.empty())
|
|
m_paint_outline.pop_back();
|
|
return;
|
|
}
|
|
m_paint_outline.push_back(placement_on_ground(world));
|
|
break;
|
|
}
|
|
case terrain_tool::water:
|
|
{
|
|
if (Shift)
|
|
{
|
|
if (false == m_water_points.empty())
|
|
m_water_points.pop_back();
|
|
return;
|
|
}
|
|
auto const point = placement_on_ground(world);
|
|
// the water reaches the lowest point of its shore, unless given by hand
|
|
if (false == m_water_level_edited)
|
|
m_water_level = m_water_points.empty() ? static_cast<float>(point.y) : std::min(m_water_level, static_cast<float>(point.y));
|
|
m_water_points.push_back(point);
|
|
break;
|
|
}
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
namespace
|
|
{
|
|
// takes the shapes of specified terrain files and materials out of the scene. returns: the count of the shapes
|
|
std::size_t drop_terrain_shapes(std::set<std::uint16_t> const &Files, std::set<material_handle> const &Materials)
|
|
{
|
|
std::size_t dropped = 0;
|
|
auto const dropping = [&](scene::shape_node const &Shape) {
|
|
auto const &data = Shape.data();
|
|
bool const drop = Files.count(data.terrainfile) != 0 && Materials.count(data.material) != 0;
|
|
dropped += drop ? 1 : 0;
|
|
return drop;
|
|
};
|
|
for (std::size_t i = 0; i < sq(scene::EU07_REGIONSIDESECTIONCOUNT); ++i)
|
|
{
|
|
auto *section = simulation::Region->get_section(i);
|
|
if (section == nullptr)
|
|
continue;
|
|
section->m_shapes.erase(std::remove_if(section->m_shapes.begin(), section->m_shapes.end(), dropping), section->m_shapes.end());
|
|
for (auto &cell : section->m_cells)
|
|
{
|
|
cell.m_shapesopaque.erase(std::remove_if(cell.m_shapesopaque.begin(), cell.m_shapesopaque.end(), dropping), cell.m_shapesopaque.end());
|
|
cell.m_shapestranslucent.erase(std::remove_if(cell.m_shapestranslucent.begin(), cell.m_shapestranslucent.end(), dropping), cell.m_shapestranslucent.end());
|
|
}
|
|
}
|
|
return dropped;
|
|
}
|
|
} // namespace
|
|
|
|
void editor_mode::load_ground_files()
|
|
{
|
|
auto &conversion{m_ground_conversion};
|
|
conversion.files.clear();
|
|
conversion.triangles.clear();
|
|
conversion.materials.clear();
|
|
conversion.names.clear();
|
|
conversion.chosen.clear();
|
|
std::map<std::string, std::uint16_t> lookup;
|
|
auto const &references{scene::terrain_file::references()};
|
|
for (std::size_t index = 0; index < references.size(); ++index)
|
|
{
|
|
ground_conversion::source source;
|
|
source.file = references[index].file;
|
|
source.reference = static_cast<std::uint16_t>(index + 1);
|
|
source.first = conversion.triangles.size();
|
|
source.good = scene::terrain_file::read_triangles(
|
|
references[index],
|
|
[&](std::string const &Material, std::array<glm::dvec3, 3> const &Triangle) {
|
|
auto found{lookup.find(Material)};
|
|
if (found == lookup.end())
|
|
{
|
|
found = lookup.emplace(Material, static_cast<std::uint16_t>(conversion.names.size())).first;
|
|
conversion.names.push_back(Material);
|
|
}
|
|
conversion.triangles.push_back(Triangle);
|
|
conversion.materials.push_back(found->second);
|
|
},
|
|
&source.message, &source.text);
|
|
if (false == source.good)
|
|
{
|
|
// what was read before the failure doesn't count
|
|
conversion.triangles.resize(source.first);
|
|
conversion.materials.resize(source.first);
|
|
source.chosen = false;
|
|
}
|
|
source.count = conversion.triangles.size() - source.first;
|
|
conversion.files.push_back(std::move(source));
|
|
}
|
|
// the terrain files hold the ground, all of it is taken unless told otherwise
|
|
for (std::size_t index = 0; index < conversion.names.size(); ++index)
|
|
conversion.chosen.insert(index);
|
|
}
|
|
|
|
std::string editor_mode::convert_ground()
|
|
{
|
|
auto &conversion{m_ground_conversion};
|
|
if (simulation::Region == nullptr || conversion.chosen.empty())
|
|
return {};
|
|
if (false == ensure_terrain())
|
|
return STR_C("The heightmap terrain can't be opened");
|
|
double const size = heightmap::chunk_size;
|
|
int const cells = heightmap::cells_for(m_terrain_spacing);
|
|
double const cellsize = size / cells;
|
|
|
|
// the chosen triangles of the chosen files
|
|
std::vector<world_triangle> triangles;
|
|
std::vector<std::uint16_t> materials;
|
|
std::set<std::uint16_t> files;
|
|
for (auto const &source : conversion.files)
|
|
{
|
|
if (false == source.good || false == source.chosen)
|
|
continue;
|
|
files.insert(source.reference);
|
|
for (auto index = source.first; index < source.first + source.count; ++index)
|
|
{
|
|
if (conversion.chosen.count(conversion.materials[index]) == 0)
|
|
continue;
|
|
triangles.push_back(conversion.triangles[index]);
|
|
materials.push_back(conversion.materials[index]);
|
|
}
|
|
}
|
|
if (triangles.empty())
|
|
return STR_C("The chosen files and materials have no triangles");
|
|
|
|
// the triangles reaching each chunk
|
|
std::map<heightmap::chunk_key, std::vector<std::uint32_t>> buckets;
|
|
for (std::uint32_t i = 0; i < triangles.size(); ++i)
|
|
{
|
|
auto const &t = triangles[i];
|
|
// a triangle which only touches the edge of a chunk gives it nothing but the edge, which the chunk on the other side has
|
|
auto const margin{1e-3};
|
|
auto const low{heightmap::chunk_at(std::min({t[0].x, t[1].x, t[2].x}) + margin, std::min({t[0].z, t[1].z, t[2].z}) + margin)};
|
|
auto const high{heightmap::chunk_at(std::max({t[0].x, t[1].x, t[2].x}) - margin, std::max({t[0].z, t[1].z, t[2].z}) - margin)};
|
|
for (int x = low.first; x <= high.first; ++x)
|
|
for (int z = low.second; z <= high.second; ++z)
|
|
buckets[{x, z}].push_back(i);
|
|
}
|
|
|
|
// palette entries of the materials, added as they're needed
|
|
std::map<std::uint16_t, std::uint16_t> palette;
|
|
auto const layer_of = [&](std::uint16_t const Material) {
|
|
auto const found{palette.find(Material)};
|
|
if (found != palette.end())
|
|
return found->second;
|
|
auto const layer{m_streamer.layer(conversion.names[Material])};
|
|
palette.emplace(Material, layer);
|
|
return layer;
|
|
};
|
|
|
|
std::size_t made = 0, skipped = 0;
|
|
std::size_t const side = static_cast<std::size_t>(cells) + 1;
|
|
auto const samples{heightmap::default_paint_samples};
|
|
std::size_t const paintside = static_cast<std::size_t>(samples) + 1;
|
|
double const paintstep = size / samples;
|
|
for (auto const &bucket : buckets)
|
|
{
|
|
auto const &key = bucket.first;
|
|
if (m_streamer.exists(key))
|
|
{
|
|
++skipped;
|
|
continue;
|
|
}
|
|
auto const low{heightmap::chunk_corner(key)};
|
|
std::vector<world_triangle> local;
|
|
std::vector<std::uint16_t> localmaterials;
|
|
for (auto const i : bucket.second)
|
|
{
|
|
local.push_back(triangles[i]);
|
|
localmaterials.push_back(materials[i]);
|
|
}
|
|
triangle_grid const ground(std::move(local), low - glm::dvec2{1.0}, low + glm::dvec2{size + 1.0});
|
|
auto const ceiling{std::numeric_limits<double>::max()};
|
|
// heights of the grid points; where there's no ground they're taken from the nearest point which has some
|
|
std::vector<double> heights(side * side, 0.0);
|
|
std::vector<char> found(side * side, 0);
|
|
bool any = false;
|
|
for (std::size_t iz = 0; iz < side; ++iz)
|
|
for (std::size_t ix = 0; ix < side; ++ix)
|
|
{
|
|
auto const index = iz * side + ix;
|
|
if (ground.height_at(low.x + ix * cellsize, low.y + iz * cellsize, ceiling, heights[index]))
|
|
found[index] = 1, any = true;
|
|
}
|
|
if (false == any)
|
|
continue;
|
|
fill_from_nearest(heights, found, side);
|
|
// the material on top at each paint sample
|
|
std::vector<std::uint16_t> paint(paintside * paintside, 0);
|
|
std::vector<char> painted(paintside * paintside, 0);
|
|
std::map<std::uint16_t, std::size_t> counts;
|
|
for (std::size_t iz = 0; iz < paintside; ++iz)
|
|
for (std::size_t ix = 0; ix < paintside; ++ix)
|
|
{
|
|
double height;
|
|
std::uint32_t triangle;
|
|
if (false == ground.height_at(low.x + ix * paintstep, low.y + iz * paintstep, ceiling, height, &triangle))
|
|
continue;
|
|
auto const index = iz * paintside + ix;
|
|
paint[index] = localmaterials[triangle];
|
|
painted[index] = 1;
|
|
++counts[paint[index]];
|
|
}
|
|
if (counts.empty())
|
|
{
|
|
// the points of the grid hit the ground, the samples in between didn't; the nearest triangle covers the chunk
|
|
counts[localmaterials.front()] = 1;
|
|
std::fill(paint.begin(), paint.end(), localmaterials.front());
|
|
}
|
|
else
|
|
fill_from_nearest(paint, painted, paintside);
|
|
// a chunk holds up to 8 materials, the ones covering the most; the rest is given to the one covering the most
|
|
std::vector<std::pair<std::size_t, std::uint16_t>> ranking;
|
|
for (auto const &count : counts)
|
|
ranking.emplace_back(count.second, count.first);
|
|
std::sort(ranking.begin(), ranking.end(), [](auto const &A, auto const &B) { return A.first > B.first; });
|
|
if (ranking.size() > heightmap::max_chunk_layers)
|
|
ranking.resize(heightmap::max_chunk_layers);
|
|
|
|
auto data{heightmap::chunk_data::make_flat(key, m_terrain_spacing, 0.f)};
|
|
for (std::size_t index = 0; index < data->heights.size(); ++index)
|
|
data->heights[index] = static_cast<float>(heights[index]);
|
|
std::map<std::uint16_t, std::size_t> slots;
|
|
for (std::size_t slot = 0; slot < ranking.size(); ++slot)
|
|
{
|
|
data->layers[slot] = layer_of(ranking[slot].second);
|
|
slots.emplace(ranking[slot].second, slot);
|
|
}
|
|
if (ranking.size() > 1)
|
|
{
|
|
auto const plane{paintside * paintside};
|
|
data->paint = samples;
|
|
data->weights.assign(plane * ranking.size(), 0);
|
|
for (std::size_t index = 0; index < plane; ++index)
|
|
{
|
|
auto const slot{slots.find(paint[index])};
|
|
data->weights[(slot != slots.end() ? slot->second : 0) * plane + index] = 255;
|
|
}
|
|
}
|
|
if (m_streamer.add_chunk(std::move(data)))
|
|
++made;
|
|
}
|
|
forget_ground();
|
|
|
|
// the converted ground goes from the scene, and from the text files on save
|
|
std::set<material_handle> handles;
|
|
for (auto const material : conversion.chosen)
|
|
if (material < conversion.names.size())
|
|
handles.insert(GfxRenderer->Fetch_Material(conversion.names[material]));
|
|
auto const dropped = drop_terrain_shapes(files, handles);
|
|
std::set<scene::layer_handle> layers;
|
|
std::size_t binary = 0;
|
|
for (auto const &source : conversion.files)
|
|
{
|
|
if (false == source.good || false == source.chosen)
|
|
continue;
|
|
if (false == source.text)
|
|
{
|
|
++binary;
|
|
continue;
|
|
}
|
|
auto const textfile{source.file + ".txtf"};
|
|
for (std::size_t layer = 1; layer <= scene::Layers.size(); ++layer)
|
|
{
|
|
auto name{scene::Layers.layer(static_cast<scene::layer_handle>(layer)).name};
|
|
replace_slashes(name);
|
|
if (name.ends_with(textfile))
|
|
layers.insert(static_cast<scene::layer_handle>(layer));
|
|
}
|
|
}
|
|
auto const erased = scene::Layers.erase_shapes(handles, &layers);
|
|
auto summary = format(STR_C("Ground converted: %zu chunks of heightmap terrain made, %zu shapes taken out of the scene, %zu triangle nodes go from the terrain files on save"), made, dropped, erased.first);
|
|
if (skipped > 0)
|
|
summary += format(STR_C(", %zu chunks kept as there was terrain already"), skipped);
|
|
if (erased.second > 0)
|
|
summary += format(STR_C(", %zu nodes stay as their files can't be rewritten"), erased.second);
|
|
if (binary > 0)
|
|
summary += format(STR_C(". %zu of the files are binary (.btf) without their text: their triangles come back with the next load, until the files are taken out of the terrain directive"), binary);
|
|
WriteLog("Editor: " + summary, logtype::generic);
|
|
return summary;
|
|
}
|
|
|
|
bool editor_mode::save()
|
|
{
|
|
if (scene::Layers.empty())
|
|
{
|
|
// without the sources tracked during the load there's no telling where the changes belong
|
|
ui()->set_status(STR("The scenery wasn't opened for editing. Start the simulator with: -edit <scenery file>"), true);
|
|
return false;
|
|
}
|
|
first_step_done(first_step::save);
|
|
|
|
// the heightmap terrain is kept in files of its own, the scenery only needs the directive which loads it, in a layer of its own
|
|
std::vector<std::string> rootstatements;
|
|
std::map<scene::layer_handle, std::vector<std::string>> statements;
|
|
if (m_streamer.active())
|
|
{
|
|
std::string error;
|
|
if (false == m_streamer.save(&error))
|
|
{
|
|
ui()->set_status(format(STR_C("The terrain couldn't be saved: %s"), error.c_str()), true);
|
|
return false;
|
|
}
|
|
if (false == scene::Layers.terrain_directive())
|
|
{
|
|
auto const directive{"heightmap_terrain " + m_streamer.name() + " endheightmap_terrain"};
|
|
if (auto const layer{output_layer("teren")}; layer != null_handle)
|
|
statements[layer].push_back(directive);
|
|
else
|
|
rootstatements.push_back(directive);
|
|
}
|
|
}
|
|
|
|
if (m_profile.changed)
|
|
profile_store();
|
|
switch_store::tidy();
|
|
switch_store::settle();
|
|
infra_store();
|
|
m_srk.store();
|
|
if (false == m_saved_camera.has_value() || glm::distance(m_saved_camera->first, glm::dvec3{Camera.Pos}) > 0.5 || glm::distance(m_saved_camera->second, glm::vec3{Camera.Angle}) > 0.01f)
|
|
{
|
|
m_saved_camera = std::make_pair(glm::dvec3{Camera.Pos}, glm::vec3{Camera.Angle});
|
|
scene::Layers.mark(scene::layer_handle{1}, "//$c", {format("%.3f %.3f %.3f %.5f %.5f", Camera.Pos.x, Camera.Pos.y, Camera.Pos.z, Camera.Angle.x, Camera.Angle.y)});
|
|
}
|
|
if (auto const map{editor_orthophoto::mark(m_orthophoto.settings(), m_orthophoto.enabled(), m_orthophoto.settings().north != 0.0 || m_orthophoto.settings().east != 0.0)}; false == m_orthophoto_scenery.empty() && map != m_orthophoto_mark && (m_orthophoto.enabled() || false == m_orthophoto_mark.empty()))
|
|
{
|
|
m_orthophoto_mark = map;
|
|
scene::Layers.mark(scene::layer_handle{1}, "//$o", {map});
|
|
}
|
|
if (auto const area{editor_orthophoto::area_lines(m_orthophoto.area())}; false == m_orthophoto_scenery.empty() && area != m_orthophoto_area_mark)
|
|
{
|
|
m_orthophoto_area_mark = area;
|
|
scene::Layers.mark(scene::layer_handle{1}, "//$z", area);
|
|
}
|
|
auto const terrainadded{false == rootstatements.empty() || false == statements.empty()};
|
|
auto const controls{turntable_controls(rootstatements)};
|
|
auto const noses{nose_controls(rootstatements)};
|
|
std::vector<std::string> trailing;
|
|
auto const placed{m_vehicle.trainset_lines(trailing)};
|
|
if (placed == 0)
|
|
starter_trainset(trailing);
|
|
auto const result = scene::Layers.save(rootstatements, trailing, statements);
|
|
if (result.success && controls)
|
|
m_turntable_included = true;
|
|
if (result.success && noses)
|
|
m_nose_included = true;
|
|
if (result.success && placed > 0)
|
|
m_vehicle.trainsets_written();
|
|
if (result.success && placed == 0 && trailing.size() == 3)
|
|
{
|
|
std::istringstream header{trailing.front()};
|
|
std::string keyword;
|
|
std::string timetable;
|
|
std::string track;
|
|
double offset{0.0};
|
|
header >> keyword >> timetable >> track >> offset;
|
|
if (auto *path{simulation::Paths.find(track)}; path != nullptr && simulation::Vehicles.find("wmb10-6457") == nullptr)
|
|
simulation::State.insert_trainset("wmb10-6457", path, offset, trailing[1] + "\n");
|
|
}
|
|
if (result.success && terrainadded)
|
|
{
|
|
scene::Layers.terrain_directive(true);
|
|
}
|
|
ui()->set_status(result.message, false == result.success);
|
|
WriteLog("Editor: " + result.message, logtype::generic);
|
|
return result.success;
|
|
}
|
|
|
|
void editor_mode::toggle_include(scene::instance_handle const Instance)
|
|
{
|
|
if (false == scene::Layers.tracked(Instance))
|
|
return;
|
|
auto const &included = scene::Layers.instance(Instance);
|
|
if (included.dead)
|
|
{
|
|
// its directive is gone from the scenery file, and the place it was at with it
|
|
ui()->set_status(format(STR_C("Include of \"%s\" was removed from the saved scenery, this can't be taken back"), included.file->c_str()), true);
|
|
return;
|
|
}
|
|
scene::Layers.removed(Instance, false == included.removed);
|
|
m_drives_standing.reset();
|
|
ui()->set_status(format(included.removed ? STR_C("Include of \"%s\" removed") : STR_C("Include of \"%s\" restored"), included.file->c_str()));
|
|
}
|
|
|
|
void editor_mode::restore_include(EditorSnapshot &Snapshot)
|
|
{
|
|
if (Snapshot.serialized.empty())
|
|
{
|
|
// the include was placed or removed; either is taken back by flipping its removal
|
|
toggle_include(Snapshot.instance);
|
|
select_include(0);
|
|
return;
|
|
}
|
|
// parameters of the include were changed. the snapshot holds the directive to go back to, and leaves with the current one
|
|
auto current = scene::Layers.directive(Snapshot.instance);
|
|
if (current.empty() || scene::Layers.instance(Snapshot.instance).dead)
|
|
{
|
|
ui()->set_status(format(STR_C("Include of \"%s\" is gone from the scenery, the change can't be taken back"), Snapshot.node_name.c_str()), true);
|
|
return;
|
|
}
|
|
set_include_directive(Snapshot.instance, Snapshot.serialized);
|
|
Snapshot.serialized = std::move(current);
|
|
select_include(scene::Layers.removable(Snapshot.instance) ? Snapshot.instance : 0);
|
|
}
|
|
|
|
void editor_mode::restore_includes(EditorSnapshot &Snapshot)
|
|
{
|
|
std::size_t gone{0};
|
|
for (auto const instance : Snapshot.instances)
|
|
{
|
|
if (false == scene::Layers.tracked(instance) || scene::Layers.instance(instance).dead)
|
|
{
|
|
++gone;
|
|
continue;
|
|
}
|
|
scene::Layers.removed(instance, false == scene::Layers.instance(instance).removed);
|
|
}
|
|
m_drives_standing.reset();
|
|
for (auto &entry : Snapshot.directives)
|
|
{
|
|
auto current = scene::Layers.directive(entry.first);
|
|
if (current.empty() || scene::Layers.instance(entry.first).dead)
|
|
{
|
|
++gone;
|
|
continue;
|
|
}
|
|
set_include_directive(entry.first, entry.second);
|
|
entry.second = std::move(current);
|
|
}
|
|
select_include(0);
|
|
ui()->set_status(gone > 0 ? format(STR_C("Includes gone from the saved scenery, they can't be taken back: %zu"), gone) : format(STR_C("Includes restored: %zu"), Snapshot.instances.size() + Snapshot.directives.size()), gone > 0);
|
|
}
|
|
|
|
void editor_mode::select_include(scene::instance_handle const Instance)
|
|
{
|
|
m_instance = (scene::Layers.tracked(Instance) ? Instance : 0);
|
|
m_include = include_selection{};
|
|
m_include_gesture = false;
|
|
if (m_instance == 0)
|
|
{
|
|
ui()->set_include(nullptr);
|
|
return;
|
|
}
|
|
auto const &included = scene::Layers.instance(m_instance);
|
|
m_include.instance = m_instance;
|
|
m_include.target = *included.file;
|
|
// NOTE: a template without a usable description is still presented, with its parameters unnamed
|
|
std::string error;
|
|
editor_includes::load(*included.file, m_include.info, error);
|
|
if (false == editor_includes::parse_directive(scene::Layers.directive(m_instance), m_include.target, m_include.values))
|
|
{
|
|
m_include.values.clear();
|
|
m_include.issue = STR_C("The directive of the include can't be read from the scenery file, its parameters can't be changed");
|
|
}
|
|
// with a rotation or a scale in effect the parameters don't translate to a location in the scene in a single way,
|
|
// see place_include()
|
|
m_include.placement = (included.context.rotation == glm::vec3{0.f} && included.context.scale == glm::vec3{1.f});
|
|
ui()->set_include(&m_include);
|
|
}
|
|
|
|
void editor_mode::set_include_directive(scene::instance_handle const Instance, std::string const &Directive)
|
|
{
|
|
m_drives_standing.reset();
|
|
std::string file;
|
|
std::vector<std::string> values;
|
|
if (scene::Layers.tracked(Instance) && editor_includes::parse_directive(Directive, file, values) && scene::Layers.instance(Instance).file != nullptr &&
|
|
editor_includes::normalized(file) == editor_includes::normalized(*scene::Layers.instance(Instance).file))
|
|
file.clear();
|
|
if (false == scene::Layers.modify(Instance, Directive, file))
|
|
return;
|
|
std::vector<TAnimModel *> retired;
|
|
simulation::State.rebuild_include(Instance, retired);
|
|
// the pick of the renderer is resolved a few frames after it's requested, and can still deliver one of these
|
|
for (auto *model : retired)
|
|
{
|
|
nullify_history_pointers(model);
|
|
m_retired.emplace_back(model, 120);
|
|
}
|
|
}
|
|
|
|
void editor_mode::apply_include()
|
|
{
|
|
if (m_instance == 0 || false == m_include.issue.empty())
|
|
return;
|
|
for (auto const &value : m_include.values)
|
|
{
|
|
if (value == "end" || value.find_first_of("\"\r\n") != std::string::npos)
|
|
{
|
|
// either would cut the directive short
|
|
ui()->set_status(STR_C("A parameter of an include can't be \"end\", or have a quotation mark in it"), true);
|
|
select_include(m_instance); // back to the values of the directive
|
|
return;
|
|
}
|
|
}
|
|
auto before = scene::Layers.directive(m_instance);
|
|
if (false == m_include.info.signal_kind.empty()
|
|
&& std::ranges::any_of(m_include.info.parameters, [](auto const &Parameter) { return Parameter.id == 6 && Parameter.role == "texture"; }))
|
|
{
|
|
// the drawn plate of a signal follows its name; a plate picked from the textures stays, and so does a drawn one given
|
|
// another name by hand. While the name is cleared or one the plate can't carry, the plate keeps the last name, and
|
|
// follows again once a usable name is typed. No plate, or the texture named like the signal the editor gave before the
|
|
// plates were drawn, become the drawn one. The look, the index and the m of the plate go with it
|
|
std::string file;
|
|
std::vector<std::string> previous;
|
|
if (editor_includes::parse_directive(before, file, previous) && previous.size() >= 6 && m_include.values.size() >= 6)
|
|
{
|
|
auto const look{signal_plate_style(previous[5])};
|
|
auto const carried = [&](std::string const &Name) { return Name != "none" && signal_plate_drawn(signal_plate(Name, look)); };
|
|
if (previous[0] != m_include.values[0] && m_include.values[5] == previous[5] && carried(m_include.values[0])
|
|
&& (previous[5] == signal_plate(previous[0], look) || (false == carried(previous[0]) && signal_plate_drawn(previous[5])) || signal_plate_blank(previous[0], previous[5])))
|
|
m_include.values[5] = signal_plate(m_include.values[0], look);
|
|
}
|
|
}
|
|
auto const directive = editor_includes::compose_directive(m_include.target, m_include.values);
|
|
if (directive == before)
|
|
return;
|
|
std::string read_before;
|
|
std::string read_after;
|
|
// a signal renamed: its indicators are named after it
|
|
std::string name_before;
|
|
glm::dvec3 standing{0.0};
|
|
// the signal templates known, though no signal tool looked for them yet
|
|
if (m_include.info.category == "signal")
|
|
signal_scan(true);
|
|
if (false == m_include.info.signal_read.empty() || signal_template_of(m_include.target) != nullptr)
|
|
{
|
|
std::string file;
|
|
std::vector<std::string> previous;
|
|
if (editor_includes::parse_directive(before, file, previous))
|
|
{
|
|
if (false == m_include.info.signal_read.empty())
|
|
{
|
|
read_before = editor_includes::substitute(m_include.info.signal_read, previous);
|
|
read_after = editor_includes::substitute(m_include.info.signal_read, m_include.values);
|
|
}
|
|
if (previous.size() >= 4 && false == m_include.values.empty() && previous.front() != m_include.values.front())
|
|
{
|
|
name_before = previous.front();
|
|
standing = scene::Layers.instance(m_instance).context.offset + glm::dvec3{std::strtod(previous[1].c_str(), nullptr), std::strtod(previous[2].c_str(), nullptr), std::strtod(previous[3].c_str(), nullptr)};
|
|
}
|
|
}
|
|
}
|
|
if (false == m_include_gesture)
|
|
{
|
|
// a single undo step for the whole drag
|
|
EditorSnapshot snap;
|
|
snap.instance = m_instance;
|
|
snap.node_name = *scene::Layers.instance(m_instance).file;
|
|
snap.serialized = std::move(before);
|
|
if (read_before != read_after)
|
|
signal_renamed(read_before, read_after, snap);
|
|
m_history.push_back(std::move(snap));
|
|
g_redo.clear();
|
|
m_include_gesture = true;
|
|
}
|
|
else if (read_before != read_after && false == m_history.empty())
|
|
signal_renamed(read_before, read_after, m_history.back());
|
|
set_include_directive(m_instance, directive);
|
|
if (false == name_before.empty() && false == m_history.empty())
|
|
{
|
|
std::vector<std::pair<scene::instance_handle, std::string>> carried;
|
|
signal_indicators_renamed(name_before, m_include.values.front(), standing, carried);
|
|
history_add_directives(m_history.back(), carried);
|
|
}
|
|
}
|
|
|
|
void editor_mode::place_include(std::string const &File, int const RotationMode, float const FixedRotation)
|
|
{
|
|
if (scene::Layers.empty())
|
|
{
|
|
// the directive has to go to a scenery file, and without the sources tracked there's no telling which
|
|
ui()->set_status(STR_C("Scenery templates can be placed only in a scenery opened for editing (-edit)"), true);
|
|
WriteLog("Editor: scenery templates can be placed only in a scenery opened for editing (-edit)", logtype::generic);
|
|
return;
|
|
}
|
|
include_info info;
|
|
std::string issue;
|
|
auto const parameters = editor_includes::parameter_count(File);
|
|
if (false == editor_includes::load(File, info, issue) || false == editor_includes::complete(info, parameters, &issue))
|
|
{
|
|
ui()->set_status(format(STR_C("Template \"%s\" can't be placed: %s"), File.c_str(), issue.c_str()), true);
|
|
return;
|
|
}
|
|
|
|
// the directive is added to the file of the active layer, and has to make sense with the placement in effect where it goes
|
|
auto const layer = scene::Layers.resolve(scene::Layers.active());
|
|
if (std::string reason; false == scene::Layers.accepts(layer, &reason))
|
|
{
|
|
ui()->set_status(format(STR_C("Template \"%s\" can't be placed: %s"), File.c_str(), (reason.empty() ? std::string{STR_C("there's no active layer to put it in")} : format(STR_C("the active layer can't take it, %s"), reason.c_str())).c_str()), true);
|
|
return;
|
|
}
|
|
auto const context = scene::Layers.layer(layer).context_insert();
|
|
if (context.rotation != glm::vec3{0.f} || context.scale != glm::vec3{1.f})
|
|
{
|
|
// a template can pass its parameters to an origin directive, which isn't affected by these, or straight to
|
|
// the nodes, which are. there's no single set of parameter values which puts both at the cursor
|
|
ui()->set_status(format(STR_C("Template \"%s\" can't be placed: the file of the active layer would receive it with a rotation or a scale in effect. Pick another layer"), File.c_str()), true);
|
|
return;
|
|
}
|
|
glm::dvec3 const location = placement_on_ground(Camera.Pos + clamp_mouse_offset_to_max(GfxRenderer->Mouse_Position()));
|
|
std::optional<float> yaw;
|
|
if (RotationMode == functions_panel::RANDOM)
|
|
yaw = static_cast<float>(LocalRandom(0.0, 360.0));
|
|
else if (RotationMode == functions_panel::FIXED)
|
|
yaw = FixedRotation;
|
|
|
|
auto const directive = editor_includes::directive(File, info, parameters, context.to_local(location), yaw);
|
|
auto const instance = scene::Layers.place(layer, File, directive);
|
|
if (instance == 0)
|
|
{
|
|
ui()->set_status(format(STR_C("Template \"%s\" can't be placed in the active layer"), File.c_str()), true);
|
|
return;
|
|
}
|
|
// show the models of the template right away. the rest of it comes into play when the saved scenery is loaded
|
|
auto const preview = simulation::State.preview_include(directive, context, layer, instance);
|
|
|
|
EditorSnapshot snap;
|
|
snap.instance = instance;
|
|
snap.node_name = File;
|
|
m_history.push_back(std::move(snap));
|
|
g_redo.clear();
|
|
select_include(instance);
|
|
|
|
ui()->set_status(format(STR_C("\"%s\" placed in layer \"%s\", models shown: %d"), info.name.c_str(), scene::Layers.layer(layer).name.c_str(), static_cast<int>(preview.first)) +
|
|
(preview.second > 0 ? format(STR_C(", other statements of the template, working once the scenery is saved and loaded again: %d"), static_cast<int>(preview.second)) : std::string{}));
|
|
}
|
|
|
|
void editor_mode::export_scenery()
|
|
{
|
|
// hiding a layer clears the visibility flag of its nodes, and the flag is a part of exported node data.
|
|
// show the hidden layers for the duration of the export, so the files get the visibility defined in the scenery
|
|
auto const hiddenlayers = scene::Layers.hidden();
|
|
for (auto const layer : hiddenlayers)
|
|
scene::Layers.visible(layer, true);
|
|
|
|
simulation::State.export_as_text(Global.SceneryFile);
|
|
|
|
for (auto const layer : hiddenlayers)
|
|
scene::Layers.visible(layer, false);
|
|
}
|
|
|
|
void editor_mode::handle_terrain_brush(double Deltatime)
|
|
{
|
|
// world point under the cursor (Mouse_Position is camera-relative, like the brush placement uses)
|
|
glm::dvec3 const offset = GfxRenderer->Mouse_Position();
|
|
if (glm::length(offset) < 1e-3)
|
|
return;
|
|
glm::dvec3 const world = Camera.Pos + offset;
|
|
// only when the cursor is over the terrain (avoids editing on a stale depth read)
|
|
if (terrain_at(world.x, world.z) == nullptr)
|
|
return;
|
|
|
|
double const rate = m_terrain_brush_strength * Deltatime;
|
|
bool shaped = false;
|
|
switch (m_terrain_tool)
|
|
{
|
|
case terrain_tool::sculpt:
|
|
shaped = m_streamer.sculpt(world.x, world.z, m_terrain_brush_radius, Global.shiftState ? -rate : rate);
|
|
break;
|
|
case terrain_tool::smooth:
|
|
shaped = m_streamer.smooth(world.x, world.z, m_terrain_brush_radius, std::min(1.0, rate * 0.5));
|
|
break;
|
|
case terrain_tool::level:
|
|
{
|
|
if (false == m_terrain_stroke && m_terrain_target_from_stroke)
|
|
{
|
|
double height;
|
|
if (m_streamer.height_at(world.x, world.z, height))
|
|
m_terrain_target = static_cast<float>(height);
|
|
}
|
|
m_terrain_stroke = true;
|
|
shaped = m_streamer.level(world.x, world.z, m_terrain_brush_radius, m_terrain_target, std::min(1.0, rate * 0.5), m_terrain_level_mode);
|
|
break;
|
|
}
|
|
case terrain_tool::paint:
|
|
m_streamer.paint(world.x, world.z, m_terrain_brush_radius, std::min(1.0, rate * 0.25), Global.shiftState ? std::uint16_t{0} : static_cast<std::uint16_t>(m_terrain_layer));
|
|
break;
|
|
case terrain_tool::restore:
|
|
shaped = m_streamer.restore_stitching(world.x, world.z, m_terrain_brush_radius, std::min(1.0, rate * 0.5));
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
if (shaped)
|
|
{
|
|
// what the road tools know about the ground is no longer true
|
|
ground_tiles.clear();
|
|
forget_ground_shapes();
|
|
}
|
|
}
|
|
|
|
void editor_mode::fill_terrain_area()
|
|
{
|
|
auto const &layers = m_streamer.manifest().layers;
|
|
if (m_paint_outline.size() < 3 || layers.empty())
|
|
return;
|
|
auto const chosen = layers[std::clamp(m_terrain_layer, 0, static_cast<int>(layers.size()) - 1)];
|
|
// the material turned by its own angle is another entry of the palette
|
|
auto const rotation = static_cast<float>(std::remainder(static_cast<double>(m_paint_rotation), 360.0));
|
|
auto const layer = chosen.rotation == rotation ? static_cast<std::uint16_t>(std::clamp(m_terrain_layer, 0, static_cast<int>(layers.size()) - 1))
|
|
: m_streamer.layer(chosen.material, chosen.size, rotation);
|
|
std::vector<glm::dvec2> outline;
|
|
for (auto const &point : m_paint_outline)
|
|
outline.emplace_back(point.x, point.z);
|
|
auto const filled = m_streamer.fill(outline, m_paint_feather, layer);
|
|
m_terrain_status = filled ? format(STR_C("Area filled with %s"), chosen.material.c_str()) : std::string(STR_C("Nothing filled: no chunk under the outline, or no room for another material"));
|
|
if (filled)
|
|
m_paint_outline.clear();
|
|
}
|
|
|
|
void editor_mode::remove_selected_chunks()
|
|
{
|
|
// one step of the history, as the terrain changed in a frame goes
|
|
std::size_t removed{0};
|
|
for (auto const &key : m_terrain_selection)
|
|
if (m_streamer.exists(key))
|
|
{
|
|
m_streamer.remove_chunk(key.first, key.second);
|
|
++removed;
|
|
}
|
|
m_terrain_selection.clear();
|
|
if (removed > 0)
|
|
{
|
|
ground_tiles.clear();
|
|
forget_ground_shapes();
|
|
}
|
|
m_terrain_status = format(STR_P("%zu chunk removed, Ctrl+Z brings it back", "%zu chunks removed, Ctrl+Z brings them back", removed), removed);
|
|
}
|
|
|
|
void editor_mode::convert_selected_chunks()
|
|
{
|
|
// with 0.5 m spacing the paint can be as fine, the other spacings keep a sample per metre
|
|
auto const paint = m_terrain_convert_paint ? (m_terrain_convert_spacing < 0.75f ? heightmap::default_paint_samples * 2 : heightmap::default_paint_samples) : 0;
|
|
std::size_t converted = 0;
|
|
for (auto const &key : m_terrain_selection)
|
|
if (m_streamer.spacing(key.first, key.second, m_terrain_convert_spacing, paint))
|
|
++converted;
|
|
if (converted > 0)
|
|
{
|
|
ground_tiles.clear();
|
|
forget_ground_shapes();
|
|
}
|
|
m_terrain_status = format(STR_C("Chunks converted to %s: %zu of %zu"), spacing_label(m_terrain_convert_spacing), converted, m_terrain_selection.size());
|
|
}
|
|
|
|
bool editor_mode::pick_terrain_target()
|
|
{
|
|
glm::dvec3 const offset = GfxRenderer->Mouse_Position();
|
|
if (glm::length(offset) < 1e-3)
|
|
return false; // nothing under the cursor
|
|
m_terrain_target = static_cast<float>(Camera.Pos.y + offset.y);
|
|
m_terrain_status = format(STR_C("Target height: %.2f m"), m_terrain_target);
|
|
return true;
|
|
}
|
|
|
|
void editor_mode::capture_terrain()
|
|
{
|
|
TAnimModel *model = dynamic_cast<TAnimModel *>(m_node);
|
|
if (model == nullptr || model->pModel == nullptr)
|
|
{
|
|
WriteLog("Editor: select a model instance to capture as terrain", logtype::generic);
|
|
return;
|
|
}
|
|
if (false == ensure_terrain())
|
|
return;
|
|
|
|
std::vector<world_triangle> tris;
|
|
gather_submodel_triangles(model->pModel->Root, instance_matrix(*model), tris);
|
|
if (tris.empty())
|
|
{
|
|
WriteLog("Editor: selected model has no readable geometry to capture", logtype::generic);
|
|
return;
|
|
}
|
|
|
|
// horizontal bounds of the captured geometry
|
|
glm::dvec2 lo(std::numeric_limits<double>::max());
|
|
glm::dvec2 hi(-std::numeric_limits<double>::max());
|
|
for (auto const &t : tris)
|
|
for (auto const &p : t)
|
|
{
|
|
lo = glm::min(lo, glm::dvec2(p.x, p.z));
|
|
hi = glm::max(hi, glm::dvec2(p.x, p.z));
|
|
}
|
|
triangle_grid const surface(std::move(tris), lo - glm::dvec2(1.0), hi + glm::dvec2(1.0));
|
|
|
|
// the chunks under the model are made where missing, then take its shape wherever it has any
|
|
auto const first = heightmap::chunk_at(lo.x, lo.y);
|
|
auto const last = heightmap::chunk_at(hi.x, hi.y);
|
|
for (int cz = first.second; cz <= last.second; ++cz)
|
|
for (int cx = first.first; cx <= last.first; ++cx)
|
|
add_chunk_from_ground({cx, cz}, m_terrain_spacing);
|
|
m_streamer.reshape(lo, hi, [&](double X, double Z, float &Height) {
|
|
double y;
|
|
if (false == surface.height_at(X, Z, std::numeric_limits<double>::max(), y))
|
|
return false;
|
|
Height = static_cast<float>(y);
|
|
return true;
|
|
});
|
|
ground_tiles.clear();
|
|
forget_ground_shapes();
|
|
|
|
// remove the original instance (recorded as a deletion so it can be undone)
|
|
std::string as_text;
|
|
model->export_as_text(as_text);
|
|
push_snapshot(model, EditorSnapshot::Action::Delete, as_text);
|
|
m_node = nullptr;
|
|
m_dragging = false;
|
|
ui()->set_node(nullptr);
|
|
erase_model(model);
|
|
}
|
|
|
|
// the ground under a point the cursor landed on. the orthophoto laid over the ground catches the cursor like any
|
|
// other surface, so the point can hang over the ground by as much as the orthophoto is lifted, or lie on the flat sheet
|
|
// the orthophoto makes where it's not fitted to the ground. what's put in the scenery is to stand on the ground itself
|
|
glm::dvec3 editor_mode::placement_on_ground(glm::dvec3 Location)
|
|
{
|
|
return ground_at(Location);
|
|
}
|
|
|
|
glm::dvec3 editor_mode::ground_at(glm::dvec3 Location) const
|
|
{
|
|
double constexpr reach = 2.0; // the ground is asked about this far around the point
|
|
double constexpr slack = 0.5; // a surface this far over the point still is what the cursor landed on
|
|
double constexpr height_tolerance = 50.0; // with nothing there or lower, how far up the ground is looked for
|
|
float constexpr terrain_model_radius = 50.0f; // the same models count as ground as for the area fill and the orthophoto
|
|
|
|
if (false == std::isfinite(Location.x) || false == std::isfinite(Location.y) || false == std::isfinite(Location.z))
|
|
return Location;
|
|
glm::dvec2 const bmin{Location.x - reach, Location.z - reach};
|
|
glm::dvec2 const bmax{Location.x + reach, Location.z + reach};
|
|
std::vector<world_triangle> triangles;
|
|
gather_ground_triangles(bmin, bmax, true, terrain_model_radius, triangles);
|
|
triangle_grid const ground(std::move(triangles), bmin, bmax);
|
|
auto const terrains = active_terrains();
|
|
for (double const ceiling : {Location.y + slack, Location.y + height_tolerance})
|
|
{
|
|
double y = -std::numeric_limits<double>::max();
|
|
bool found = ground.height_at(Location.x, Location.z, ceiling, y);
|
|
for (editor_terrain *terrain : terrains)
|
|
{
|
|
if (!terrain->contains(Location.x, Location.z))
|
|
continue;
|
|
double const h = terrain->height_at(Location.x, Location.z);
|
|
if (h <= ceiling && (!found || h > y))
|
|
{
|
|
y = h;
|
|
found = true;
|
|
}
|
|
}
|
|
if (found)
|
|
{
|
|
Location.y = y;
|
|
break;
|
|
}
|
|
}
|
|
// with no ground found the point stays where the cursor landed
|
|
return Location;
|
|
}
|
|
|
|
// puts every instance of the model the selected node shows on the ground under it
|
|
void editor_mode::drop_model_instances()
|
|
{
|
|
auto *selected = dynamic_cast<TAnimModel *>(m_node);
|
|
if (selected == nullptr || selected->Model() == nullptr)
|
|
{
|
|
ui()->set_status(STR("Select a model in the scene first"), true);
|
|
return;
|
|
}
|
|
if (selected->radius() >= 50.0f)
|
|
{
|
|
// it'd be put on top of itself
|
|
ui()->set_status(format(STR_C("\"%s\" is large enough to count as ground itself, so there's nothing to put it on"), selected->Model()->NameGet().c_str()), true);
|
|
return;
|
|
}
|
|
std::vector<TAnimModel *> instances;
|
|
std::vector<glm::dvec3> points;
|
|
int locked = 0;
|
|
for (auto *instance : simulation::Instances.sequence())
|
|
{
|
|
if (instance == nullptr || instance->Model() != selected->Model())
|
|
continue;
|
|
if (instance->from_template() || false == scene::Layers.editable(instance))
|
|
{
|
|
// placed by a template, or on a layer which is hidden or locked
|
|
++locked;
|
|
continue;
|
|
}
|
|
instances.push_back(instance);
|
|
points.push_back(instance->location());
|
|
}
|
|
// the ground the road tools use: terrain shapes, large models and the terrain made in the editor, without the roads and the orthophoto.
|
|
// a point with nothing under it comes back with the height it has
|
|
auto const heights = ground_heights(points, true);
|
|
int moved = 0;
|
|
for (std::size_t idx = 0; idx < instances.size(); ++idx)
|
|
{
|
|
if (std::abs(heights[idx] - points[idx].y) < 0.001)
|
|
continue;
|
|
auto *instance = instances[idx];
|
|
// one step of the history for each instance
|
|
push_snapshot(instance, EditorSnapshot::Action::Move);
|
|
auto location = points[idx];
|
|
location.y = heights[idx];
|
|
simulation::Region->erase(instance);
|
|
instance->location(location);
|
|
simulation::Region->insert(instance);
|
|
instance->mark_dirty();
|
|
++moved;
|
|
}
|
|
std::string status = format(STR_C("%d of %d copies of \"%s\" put on the ground"), moved, static_cast<int>(instances.size()), selected->Model()->NameGet().c_str());
|
|
if (moved > 0)
|
|
status += STR_C("; Ctrl+Z takes them back one at a time");
|
|
if (locked > 0)
|
|
status += format(STR_C(". Left alone, placed by a template or on a layer which can't be edited: %d"), locked);
|
|
ui()->set_status(status);
|
|
}
|
|
|
|
void editor_mode::read_georeference()
|
|
{
|
|
if (m_georeference_read)
|
|
return;
|
|
m_georeference_read = true;
|
|
m_georeference = false;
|
|
m_georeference_line.clear();
|
|
// the name of the scenery is kept in lower case, the file may have capitals in its name
|
|
std::filesystem::path file{Global.asCurrentSceneryPath + Global.SceneryFile};
|
|
std::error_code error;
|
|
if (false == std::filesystem::exists(file, error))
|
|
{
|
|
for (std::filesystem::directory_iterator entry{Global.asCurrentSceneryPath, error}, end; entry != end; entry.increment(error))
|
|
{
|
|
std::string name;
|
|
try
|
|
{
|
|
name = entry->path().filename().string();
|
|
}
|
|
catch (std::exception const &)
|
|
{
|
|
continue;
|
|
}
|
|
std::transform(name.begin(), name.end(), name.begin(), [](unsigned char const Character) { return static_cast<char>(std::tolower(Character)); });
|
|
if (name == Global.SceneryFile)
|
|
{
|
|
file = entry->path();
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
std::ifstream stream(file);
|
|
std::string line;
|
|
for (int count = 0; count < 200 && std::getline(stream, line); ++count)
|
|
{
|
|
auto const mark = line.find("//$g");
|
|
if (mark == std::string::npos)
|
|
continue;
|
|
// Rainsted writes the origin of the scenery as: //$g <system> <easting> <northing>, in kilometres
|
|
std::istringstream words(line.substr(mark + 4));
|
|
std::string system;
|
|
double east{0.0};
|
|
double north{0.0};
|
|
if (false == static_cast<bool>(words >> system >> east >> north) || system.find("1992") == std::string::npos)
|
|
continue;
|
|
auto const scale = (east < 10000.0 && north < 10000.0) ? 1000.0 : 1.0;
|
|
m_georeference_origin = {north * scale, east * scale};
|
|
m_georeference_line = line.substr(mark);
|
|
if (false == m_georeference_line.empty() && m_georeference_line.back() == '\r')
|
|
m_georeference_line.pop_back();
|
|
m_georeference = true;
|
|
break;
|
|
}
|
|
}
|
|
|
|
void editor_mode::render_map_menu()
|
|
{
|
|
if (false == ImGui::BeginMenu(STR_C("Map")))
|
|
return;
|
|
if (ImGui::MenuItem(STR_C("Minimap"), "Ctrl+M", m_minimap.is_open()))
|
|
m_minimap.toggle();
|
|
ImGui::Separator();
|
|
bool enabled = m_orthophoto.enabled();
|
|
if (ImGui::MenuItem(STR_C("Orthophoto"), nullptr, enabled))
|
|
choose_orthophoto(false == enabled);
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("Aerial imagery of geoportal.gov.pl under the scenery, laid out by the origin of the scenery"));
|
|
// the settings among the base layers in the layers window
|
|
if (ImGui::MenuItem(STR_C("Orthophoto settings..."), nullptr, orthophoto_settings_open()))
|
|
{
|
|
ui()->show_layers();
|
|
m_orthophoto_window = true;
|
|
}
|
|
ImGui::EndMenu();
|
|
}
|
|
|
|
bool editor_mode::orthophoto_settings_open() const
|
|
{
|
|
// drawn open in the layers window in this frame or in the last one
|
|
return ImGui::GetCurrentContext() != nullptr && ImGui::GetFrameCount() - m_orthophoto_frame <= 1;
|
|
}
|
|
|
|
void editor_mode::render_base_layers()
|
|
{
|
|
auto &stored{EditorSettings.wms_layers()};
|
|
bool save{false};
|
|
// the WMS layers of the user's, the top one first, each drawn over the ones under it
|
|
int moved{-1};
|
|
int removed{-1};
|
|
for (int i = 0; i < static_cast<int>(stored.size()); ++i)
|
|
{
|
|
auto &entry{stored[static_cast<std::size_t>(i)]};
|
|
ImGui::PushID(i + 1);
|
|
save |= ImGui::Checkbox("##visible", &entry.visible);
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("Show or hide the layer"));
|
|
ImGui::SameLine();
|
|
if (ImGui::TreeNode("##wms", "%s", entry.title.empty() ? entry.layers.c_str() : entry.title.c_str()))
|
|
{
|
|
ImGui::PushTextWrapPos(0.0f);
|
|
ImGui::TextDisabled("%s", entry.url.c_str());
|
|
ImGui::TextDisabled(STR_C("Layers: %s"), entry.layers.c_str());
|
|
ImGui::PopTextWrapPos();
|
|
ImGui::SetNextItemWidth(160.0f);
|
|
ImGui::SliderFloat(STR_C("Opacity"), &entry.opacity, 0.0f, 1.0f, "%.2f");
|
|
save |= ImGui::IsItemDeactivatedAfterEdit();
|
|
if (false == entry.terms.empty())
|
|
{
|
|
ImGui::TextUnformatted(STR_C("Terms of the service:"));
|
|
ImGui::PushTextWrapPos(0.0f);
|
|
ImGui::TextDisabled("%s", entry.terms.c_str());
|
|
ImGui::PopTextWrapPos();
|
|
}
|
|
if (i > 0)
|
|
{
|
|
if (ImGui::SmallButton(STR_C("Up")))
|
|
moved = i - 1;
|
|
ImGui::SameLine();
|
|
}
|
|
if (i + 1 < static_cast<int>(stored.size()))
|
|
{
|
|
if (ImGui::SmallButton(STR_C("Down")))
|
|
moved = i;
|
|
ImGui::SameLine();
|
|
}
|
|
if (ImGui::SmallButton(STR_C("Remove")))
|
|
removed = i;
|
|
ImGui::TreePop();
|
|
}
|
|
ImGui::PopID();
|
|
}
|
|
// a layer swapped with the one under it, or one taken away; the ones of the view go along
|
|
if (moved >= 0 && moved + 1 < static_cast<int>(stored.size()))
|
|
{
|
|
std::swap(stored[static_cast<std::size_t>(moved)], stored[static_cast<std::size_t>(moved) + 1]);
|
|
if (moved + 1 < static_cast<int>(m_wms.size()))
|
|
std::swap(m_wms[static_cast<std::size_t>(moved)], m_wms[static_cast<std::size_t>(moved) + 1]);
|
|
save = true;
|
|
}
|
|
if (removed >= 0)
|
|
{
|
|
stored.erase(stored.begin() + removed);
|
|
if (removed < static_cast<int>(m_wms.size()))
|
|
{
|
|
m_wms[static_cast<std::size_t>(removed)]->enabled(false);
|
|
m_wms[static_cast<std::size_t>(removed)]->detach_scene();
|
|
m_wms.erase(m_wms.begin() + removed);
|
|
}
|
|
save = true;
|
|
}
|
|
if (save)
|
|
EditorSettings.save();
|
|
|
|
// the orthophoto at the bottom, its settings opened here from the map menu too
|
|
ImGui::PushID("orthophoto");
|
|
bool enabled{m_orthophoto.enabled()};
|
|
if (ImGui::Checkbox("##visible", &enabled))
|
|
choose_orthophoto(enabled);
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("Aerial imagery of geoportal.gov.pl under the scenery, laid out by the origin of the scenery"));
|
|
ImGui::SameLine();
|
|
if (m_orthophoto_window)
|
|
{
|
|
ImGui::SetNextItemOpen(true);
|
|
m_orthophoto_window = false;
|
|
}
|
|
if (ImGui::TreeNode("##settings", "%s", STR_C("Orthophoto (geoportal.gov.pl)")))
|
|
{
|
|
m_orthophoto_frame = ImGui::GetFrameCount();
|
|
render_orthophoto_ui();
|
|
ImGui::TreePop();
|
|
}
|
|
ImGui::PopID();
|
|
|
|
// the terrain of the model under the tracks laid, as the terrain panel has it too
|
|
if (ImGui::Checkbox(STR_C("Terrain of the model right away while laying"), &m_nmt_state.grow))
|
|
{
|
|
EditorSettings.terrain_while_laying(m_nmt_state.grow);
|
|
EditorSettings.save();
|
|
}
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("Where the terrain of the scenery ends, the terrain model is made under the tracks as they're laid, around the cursor from the first point placed; "
|
|
"the chunks there are stay as they are. Off, it's made only when asked for"));
|
|
|
|
render_wms_adding();
|
|
}
|
|
|
|
void editor_mode::render_wms_adding()
|
|
{
|
|
auto &adding{m_wms_adding};
|
|
ImGui::PushID("wmsadding");
|
|
if (false == ImGui::TreeNode("##add", "%s", STR_C("Add a WMS layer")))
|
|
{
|
|
ImGui::PopID();
|
|
return;
|
|
}
|
|
ImGui::PushTextWrapPos(0.0f);
|
|
ImGui::TextDisabled("%s", STR_C("The address of a WMS service drawing in PUWG 1992 (EPSG:2180). Its tiles are kept in memory only and asked for only around the camera; "
|
|
"what the service allows is up to you, its terms are shown below"));
|
|
ImGui::PopTextWrapPos();
|
|
ImGui::SetNextItemWidth(-1.0f);
|
|
auto const entered{ImGui::InputTextWithHint("##url", "https://...", adding.url.data(), adding.url.size(), ImGuiInputTextFlags_EnterReturnsTrue)};
|
|
std::string const url{adding.url.data()};
|
|
if ((ImGui::Button(STR_C("Read the layers")) || entered) && false == adding.reading.valid() && false == url.empty())
|
|
{
|
|
adding.info.reset();
|
|
adding.ticked.clear();
|
|
adding.service = url;
|
|
adding.reading = std::async(std::launch::async, [url]() { return editor_orthophoto::describe(url); });
|
|
}
|
|
if (adding.reading.valid())
|
|
{
|
|
if (adding.reading.wait_for(std::chrono::seconds(0)) == std::future_status::ready)
|
|
{
|
|
adding.info = adding.reading.get();
|
|
adding.ticked.assign(adding.info->layers.size(), 0);
|
|
}
|
|
else
|
|
ImGui::TextDisabled("%s", STR_C("Reading the capabilities of the service..."));
|
|
}
|
|
if (adding.info.has_value())
|
|
{
|
|
auto const &info{*adding.info};
|
|
ImGui::PushTextWrapPos(0.0f);
|
|
if (false == info.error.empty())
|
|
ImGui::TextColored(ImVec4(1.0f, 0.45f, 0.4f, 1.0f), STR_C("The service can't be read: %s"), info.error.c_str());
|
|
if (false == info.title.empty())
|
|
ImGui::TextUnformatted(info.title.c_str());
|
|
if (false == info.terms.empty())
|
|
{
|
|
ImGui::TextUnformatted(STR_C("Terms of the service:"));
|
|
ImGui::TextDisabled("%s", info.terms.c_str());
|
|
}
|
|
if (false == info.puwg && false == info.layers.empty())
|
|
ImGui::TextColored(ImVec4(1.0f, 0.75f, 0.2f, 1.0f), "%s", STR_C("The service doesn't draw in PUWG 1992 (EPSG:2180), the editor can't lay it out"));
|
|
ImGui::PopTextWrapPos();
|
|
if (false == info.layers.empty())
|
|
{
|
|
ImGui::SetNextItemWidth(-1.0f);
|
|
ImGui::InputTextWithHint("##filter", STR_C("Filter the layers"), adding.filter.data(), adding.filter.size());
|
|
auto const filter{ToLower(adding.filter.data())};
|
|
ImGui::BeginChild("##layers", ImVec2(0.0f, std::min(200.0f, ImGui::GetFrameHeightWithSpacing() * static_cast<float>(info.layers.size()) + 4.0f)), true);
|
|
for (std::size_t i = 0; i < info.layers.size(); ++i)
|
|
{
|
|
auto const &[name, title]{info.layers[i]};
|
|
auto const label{title.empty() || title == name ? name : title + " (" + name + ")"};
|
|
if (false == filter.empty() && ToLower(label).find(filter) == std::string::npos)
|
|
continue;
|
|
bool ticked{adding.ticked[i] != 0};
|
|
ImGui::PushID(static_cast<int>(i));
|
|
if (ImGui::Checkbox(label.c_str(), &ticked))
|
|
adding.ticked[i] = ticked ? 1 : 0;
|
|
ImGui::PopID();
|
|
}
|
|
ImGui::EndChild();
|
|
std::string layers;
|
|
for (std::size_t i = 0; i < info.layers.size(); ++i)
|
|
if (adding.ticked[i] != 0)
|
|
layers += (layers.empty() ? "" : ",") + info.layers[i].first;
|
|
auto const ready{info.puwg && false == layers.empty()};
|
|
if (false == ready)
|
|
{
|
|
ImGui::PushItemFlag(ImGuiItemFlags_Disabled, true);
|
|
ImGui::PushStyleVar(ImGuiStyleVar_Alpha, ImGui::GetStyle().Alpha * 0.5f);
|
|
}
|
|
auto const add{ImGui::Button(STR_C("Add")) && ready};
|
|
if (false == ready)
|
|
{
|
|
ImGui::PopStyleVar();
|
|
ImGui::PopItemFlag();
|
|
}
|
|
if (add)
|
|
{
|
|
editorSettings::wms_layer entry;
|
|
entry.url = adding.service;
|
|
entry.layers = layers;
|
|
entry.title = info.title.empty() ? layers : info.title;
|
|
entry.terms = info.terms;
|
|
// on top of the others
|
|
EditorSettings.wms_layers().insert(EditorSettings.wms_layers().begin(), entry);
|
|
EditorSettings.save();
|
|
adding.info.reset();
|
|
adding.ticked.clear();
|
|
adding.url.fill('\0');
|
|
adding.filter.fill('\0');
|
|
}
|
|
}
|
|
}
|
|
ImGui::TreePop();
|
|
ImGui::PopID();
|
|
}
|
|
|
|
void editor_mode::update_wms_layers()
|
|
{
|
|
auto const &stored{EditorSettings.wms_layers()};
|
|
// a layer added or removed: the ones of the view made again, as the settings have them
|
|
auto same{m_wms.size() == stored.size()};
|
|
for (std::size_t i = 0; same && i < stored.size(); ++i)
|
|
same = m_wms[i]->settings().service == stored[i].url && m_wms[i]->settings().layers == stored[i].layers;
|
|
if (false == same)
|
|
{
|
|
for (auto &layer : m_wms)
|
|
{
|
|
layer->enabled(false);
|
|
layer->detach_scene();
|
|
}
|
|
m_wms.clear();
|
|
for (auto const &entry : stored)
|
|
{
|
|
auto layer{std::make_unique<editor_orthophoto>()};
|
|
auto config{layer->settings()};
|
|
config.service = entry.url;
|
|
config.layers = entry.layers;
|
|
config.hires = false;
|
|
config.year = 0;
|
|
config.in_scene = false;
|
|
layer->settings(config);
|
|
ground_sources(*layer);
|
|
m_wms.push_back(std::move(layer));
|
|
}
|
|
}
|
|
// laid out by the origin of the scenery and onto the ground as the orthophoto is, around the camera as far as it
|
|
load_orthophoto_settings();
|
|
auto const &base{m_orthophoto.settings()};
|
|
auto const placed{base.north != 0.0 || base.east != 0.0};
|
|
for (std::size_t i = 0; i < m_wms.size(); ++i)
|
|
{
|
|
auto &layer{*m_wms[i]};
|
|
auto config{layer.settings()};
|
|
if (config.north != base.north || config.east != base.east || config.radius != base.radius || config.drape != base.drape || config.lift != base.lift || config.height != base.height ||
|
|
config.opacity != stored[i].opacity)
|
|
{
|
|
config.north = base.north;
|
|
config.east = base.east;
|
|
config.radius = base.radius;
|
|
config.drape = base.drape;
|
|
config.lift = base.lift;
|
|
config.height = base.height;
|
|
config.opacity = stored[i].opacity;
|
|
layer.settings(config);
|
|
}
|
|
layer.enabled(stored[i].visible && placed);
|
|
layer.update(Camera.Pos);
|
|
}
|
|
}
|
|
|
|
void editor_mode::render_view_menu()
|
|
{
|
|
if (false == ImGui::BeginMenu(STR_C("View")))
|
|
return;
|
|
if (ImGui::MenuItem(STR_C("Top view, orthographic"), "O", Global.EditorOrtho))
|
|
toggle_ortho();
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("The view straight down without perspective, as on a map; again for the camera as it was"));
|
|
if (ImGui::BeginMenu(STR_C("Tracks in the top view")))
|
|
{
|
|
render_top_tracks_choice(false);
|
|
ImGui::EndMenu();
|
|
}
|
|
if (ImGui::BeginMenu(STR_C("Track colours")))
|
|
{
|
|
char const *const names[]{"Plain", "By the radius", "By the speed", "By the grade"};
|
|
for (int i = 0; i < 4; ++i)
|
|
if (ImGui::MenuItem(STR_C(names[i]), nullptr, static_cast<int>(m_track_colouring) == i))
|
|
m_track_colouring = static_cast<track_colouring>(i);
|
|
ImGui::EndMenu();
|
|
}
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("The tracks of the track mode coloured by their radius, speed or grade, with the legend in the corner"));
|
|
ImGui::MenuItem(STR_C("Track labels in the top view"), nullptr, &m_track_labels);
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("Zoomed in from above, the curves get their radius and length and the switches their name and type, as on a plan; where they'd crowd, some are left out"));
|
|
ImGui::MenuItem(STR_C("Show lanes"), nullptr, &m_roadtool.lanes);
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("The lanes of the roads drawn as the paths the vehicles take"));
|
|
if (ImGui::MenuItem(STR_C("Structure gauge"), nullptr, m_gauge.is_open()))
|
|
m_gauge.toggle();
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("Checks which models enter the structure gauge of the tracks and the clearance over the roads (skrajnia budowli)"));
|
|
ImGui::Separator();
|
|
ImGui::MenuItem(STR_C("Weather and time"), nullptr, &m_environment_open);
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("Time of day, day of the year, visibility, clouds and air temperature, as the scenery is seen in the editor"));
|
|
ImGui::EndMenu();
|
|
}
|
|
|
|
void editor_mode::render_environment_window()
|
|
{
|
|
if (false == m_environment_open)
|
|
return;
|
|
ImGui::SetNextWindowSize(ImVec2(420.0f * Global.ui_scale, 0.0f), ImGuiCond_FirstUseEver);
|
|
if (ImGui::Begin((std::string(STR_C("Weather and time")) + "###environment").c_str(), &m_environment_open, ImGuiWindowFlags_NoCollapse))
|
|
{
|
|
// what the setdatetime, setweather and settemperature commands do in the driver mode; the editor doesn't take commands
|
|
auto const set_date_time = [](int const Yearday, int const Minute) {
|
|
simulation::Time.set_time(Yearday, Minute);
|
|
auto const weather{Global.Weather};
|
|
simulation::Environment.compute_season(Yearday);
|
|
if (weather != Global.Weather)
|
|
{
|
|
// HACK: force re-calculation of precipitation, as the command does
|
|
Global.Overcast = std::clamp(Global.Overcast - 0.0001f, 0.0f, 2.0f);
|
|
}
|
|
simulation::Environment.update_moon();
|
|
};
|
|
// the names of the period, season and weather end with a colon, being keys of other lookups
|
|
auto const name = [](std::string Text) {
|
|
if (false == Text.empty() && Text.back() == ':')
|
|
Text.pop_back();
|
|
return Text;
|
|
};
|
|
auto const &time{simulation::Time.data()};
|
|
auto minute{time.wHour * 60 + time.wMinute};
|
|
auto const clock{format("%02d:%02d (%s)", time.wHour, time.wMinute, name(Global.Period).c_str())};
|
|
if (ImGui::SliderInt((std::string(STR_C("Time of day")) + "###timeofday").c_str(), &minute, 0, 1439, clock.c_str()))
|
|
set_date_time(static_cast<int>(std::round(Global.fMoveLight)), std::clamp(minute, 0, 1439));
|
|
auto yearday{Global.fMoveLight};
|
|
auto const day{format("%.0f (%s)", Global.fMoveLight, name(Global.Season).c_str())};
|
|
if (ImGui::SliderFloat((std::string(STR_C("Day of the year")) + "###dayofyear").c_str(), &yearday, 0.0f, 364.0f, day.c_str()))
|
|
set_date_time(static_cast<int>(std::round(std::clamp(yearday, 0.0f, 365.0f))), time.wHour * 60 + time.wMinute);
|
|
ImGui::Separator();
|
|
auto visibility{std::log(Global.fFogEnd)};
|
|
auto const fog{format("%.0f m", Global.fFogEnd)};
|
|
if (ImGui::SliderFloat((std::string(STR_C("Visibility")) + "###visibility").c_str(), &visibility, std::log(10.0f), std::log(50000.0f), fog.c_str()))
|
|
{
|
|
Global.fFogEnd = std::clamp(std::exp(visibility), 10.0f, 50000.0f);
|
|
simulation::Environment.compute_weather();
|
|
}
|
|
auto overcast{Global.Overcast};
|
|
auto const clouds{format("%.2f (%s)", Global.Overcast, name(Global.Weather).c_str())};
|
|
if (ImGui::SliderFloat((std::string(STR_C("Clouds")) + "###overcast").c_str(), &overcast, 0.0f, 2.0f, clouds.c_str()))
|
|
{
|
|
Global.Overcast = std::clamp(overcast, 0.0f, 2.0f);
|
|
simulation::Environment.compute_weather();
|
|
}
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("Up to 1 the sky clouds over, past it rain or snow falls, by the air temperature"));
|
|
auto temperature{Global.AirTemperature};
|
|
auto const air{format("%.1f °C", Global.AirTemperature)};
|
|
if (ImGui::SliderFloat((std::string(STR_C("Air temperature")) + "###airtemperature").c_str(), &temperature, -35.0f, 40.0f, air.c_str()))
|
|
{
|
|
Global.AirTemperature = std::clamp(temperature, -35.0f, 40.0f);
|
|
simulation::Environment.compute_weather();
|
|
}
|
|
ImGui::PushStyleColor(ImGuiCol_Text, ImGui::GetStyleColorVec4(ImGuiCol_TextDisabled));
|
|
ImGui::TextWrapped("%s", STR_C("Seen in the editor only; the scenery keeps its own time and weather"));
|
|
ImGui::PopStyleColor();
|
|
}
|
|
ImGui::End();
|
|
}
|
|
|
|
void editor_mode::render_new_scenery_popup()
|
|
{
|
|
if (m_newscenery_asked)
|
|
{
|
|
ImGui::OpenPopup(STR_C("New scenery##restart"));
|
|
m_newscenery_asked = false;
|
|
}
|
|
if (false == ImGui::BeginPopupModal(STR_C("New scenery##restart"), nullptr, ImGuiWindowFlags_AlwaysAutoResize))
|
|
return;
|
|
ImGui::TextUnformatted(STR_C("The editor starts again, with the wizard of a new scenery."));
|
|
auto const editsession{false == scene::Layers.empty()};
|
|
if (false == m_history.empty())
|
|
ImGui::TextColored(ImVec4(1.0f, 0.7f, 0.3f, 1.0f), "%s", STR_C("What isn't saved of this scenery is lost."));
|
|
if (editsession && ImGui::Button(STR_C("Save and start the wizard")))
|
|
{
|
|
if (save() && false == restart_for_new_scenery())
|
|
ui()->set_status(STR_C("The editor couldn't be started again"), true);
|
|
ImGui::CloseCurrentPopup();
|
|
}
|
|
if (editsession)
|
|
ImGui::SameLine();
|
|
if (ImGui::Button(STR_C("Start the wizard")))
|
|
{
|
|
if (false == restart_for_new_scenery())
|
|
ui()->set_status(STR_C("The editor couldn't be started again"), true);
|
|
ImGui::CloseCurrentPopup();
|
|
}
|
|
ImGui::SameLine();
|
|
if (ImGui::Button(STR_C("Cancel")))
|
|
ImGui::CloseCurrentPopup();
|
|
ImGui::EndPopup();
|
|
}
|
|
|
|
bool editor_mode::restart_for_new_scenery()
|
|
{
|
|
return restart_editor(std::string{});
|
|
}
|
|
|
|
bool editor_mode::restart_editor(std::string const &Scenery)
|
|
{
|
|
#ifdef _WIN32
|
|
_putenv("EU07_EDITOR_SELFTEST=");
|
|
wchar_t path[MAX_PATH];
|
|
if (GetModuleFileNameW(nullptr, path, MAX_PATH) == 0)
|
|
return false;
|
|
std::wstring command{L"\"" + std::wstring{path} + L"\" -edit"};
|
|
if (false == Scenery.empty())
|
|
command += L" \"" + std::filesystem::path(Scenery).wstring() + L"\"";
|
|
STARTUPINFOW startup{};
|
|
startup.cb = sizeof(startup);
|
|
PROCESS_INFORMATION process{};
|
|
if (false == CreateProcessW(nullptr, command.data(), nullptr, nullptr, FALSE, 0, nullptr, nullptr, &startup, &process))
|
|
return false;
|
|
CloseHandle(process.hThread);
|
|
CloseHandle(process.hProcess);
|
|
#else
|
|
unsetenv("EU07_EDITOR_SELFTEST");
|
|
char path[4096];
|
|
auto const size{readlink("/proc/self/exe", path, sizeof(path) - 1)};
|
|
if (size <= 0)
|
|
return false;
|
|
path[size] = '\0';
|
|
char edit[]{"-edit"};
|
|
std::string scenery{Scenery};
|
|
char *arguments[]{path, edit, scenery.empty() ? nullptr : scenery.data(), nullptr};
|
|
posix_spawnattr_t attributes;
|
|
posix_spawnattr_init(&attributes);
|
|
posix_spawnattr_setflags(&attributes, POSIX_SPAWN_SETSID);
|
|
pid_t child;
|
|
auto const result{posix_spawn(&child, path, nullptr, &attributes, arguments, environ)};
|
|
posix_spawnattr_destroy(&attributes);
|
|
if (result != 0)
|
|
return false;
|
|
#endif
|
|
WriteLog(Scenery.empty() ? std::string{"Editor: started again for a new scenery"} : "Editor: started again with scenery " + Scenery);
|
|
Application.queue_quit(true);
|
|
return true;
|
|
}
|
|
|
|
void editor_mode::render_open_scenery_popup()
|
|
{
|
|
auto const lower = [](std::string Text) {
|
|
std::transform(Text.begin(), Text.end(), Text.begin(), [](unsigned char const Character) { return static_cast<char>(std::tolower(Character)); });
|
|
return Text;
|
|
};
|
|
if (m_openscenery_asked)
|
|
{
|
|
m_openscenery_asked = false;
|
|
m_openscenery_list.clear();
|
|
m_openscenery_choice.clear();
|
|
std::error_code error;
|
|
for (std::filesystem::directory_iterator entry{Global.asCurrentSceneryPath, error}, end; entry != end; entry.increment(error))
|
|
{
|
|
std::string name;
|
|
try
|
|
{
|
|
name = entry->path().filename().string();
|
|
}
|
|
catch (std::exception const &)
|
|
{
|
|
continue;
|
|
}
|
|
std::error_code status;
|
|
if (entry->is_regular_file(status) && name.size() > 4 && lower(name.substr(name.size() - 4)) == ".scn" && name.front() != '$')
|
|
m_openscenery_list.emplace_back(name);
|
|
}
|
|
std::sort(m_openscenery_list.begin(), m_openscenery_list.end(), [&](std::string const &A, std::string const &B) { return lower(A) < lower(B); });
|
|
ImGui::OpenPopup(STR_C("Open scenery##restart"));
|
|
}
|
|
if (false == ImGui::BeginPopupModal(STR_C("Open scenery##restart"), nullptr, ImGuiWindowFlags_AlwaysAutoResize))
|
|
return;
|
|
ImGui::TextUnformatted(STR_C("The editor starts again with the scenery chosen below."));
|
|
ImGui::SetNextItemWidth(360.0f);
|
|
if (ImGui::IsWindowAppearing())
|
|
ImGui::SetKeyboardFocusHere();
|
|
ImGui::InputTextWithHint("##opensearch", STR_C("search"), m_openscenery_search, sizeof(m_openscenery_search));
|
|
std::string const text{lower(m_openscenery_search)};
|
|
ImGui::BeginChild("##openlist", ImVec2(360.0f, ImGui::GetTextLineHeightWithSpacing() * 14.0f), true);
|
|
for (auto const &name : m_openscenery_list)
|
|
{
|
|
if (false == text.empty() && lower(name).find(text) == std::string::npos)
|
|
continue;
|
|
if (ImGui::Selectable(name.c_str(), name == m_openscenery_choice, ImGuiSelectableFlags_AllowDoubleClick))
|
|
{
|
|
m_openscenery_choice = name;
|
|
if (ImGui::IsMouseDoubleClicked(0) && false == restart_editor(name))
|
|
ui()->set_status(STR_C("The editor couldn't be started again"), true);
|
|
}
|
|
}
|
|
ImGui::EndChild();
|
|
auto const editsession{false == scene::Layers.empty()};
|
|
if (false == m_history.empty())
|
|
ImGui::TextColored(ImVec4(1.0f, 0.7f, 0.3f, 1.0f), "%s", STR_C("What isn't saved of this scenery is lost."));
|
|
auto const chosen{false == m_openscenery_choice.empty()};
|
|
if (chosen && editsession && ImGui::Button(STR_C("Save and open")))
|
|
{
|
|
if (save() && false == restart_editor(m_openscenery_choice))
|
|
ui()->set_status(STR_C("The editor couldn't be started again"), true);
|
|
ImGui::CloseCurrentPopup();
|
|
}
|
|
if (chosen && editsession)
|
|
ImGui::SameLine();
|
|
if (chosen && ImGui::Button(STR_C("Open")))
|
|
{
|
|
if (false == restart_editor(m_openscenery_choice))
|
|
ui()->set_status(STR_C("The editor couldn't be started again"), true);
|
|
ImGui::CloseCurrentPopup();
|
|
}
|
|
if (chosen)
|
|
ImGui::SameLine();
|
|
if (ImGui::Button(STR_C("Cancel")))
|
|
ImGui::CloseCurrentPopup();
|
|
ImGui::EndPopup();
|
|
}
|
|
|
|
void editor_mode::terrain_workspace(bool const Open)
|
|
{
|
|
m_terrain_open = Open;
|
|
if (false == Open)
|
|
m_terrain_tool = terrain_tool::none;
|
|
else if (m_streamer.active())
|
|
m_terrain_spacing = m_streamer.manifest().spacing;
|
|
}
|
|
|
|
editor_mode::texture_offer editor_mode::terrain_texture_offer(char const *None)
|
|
{
|
|
return {STR_C("In the palette and on the water of this terrain:"),
|
|
[this]() {
|
|
std::vector<texture_use> list;
|
|
auto const add = [&](std::string const &Name, char const *Note) {
|
|
if (Name.empty() || Name == "none" || std::any_of(list.begin(), list.end(), [&](texture_use const &Use) { return Use.name == Name; }))
|
|
return;
|
|
list.push_back({null_handle, Name, 0, Note});
|
|
};
|
|
for (auto const &layer : m_streamer.manifest().layers)
|
|
add(layer.material, STR_C("In the palette of the terrain"));
|
|
add(m_streamer.manifest().water_material, STR_C("The default water material"));
|
|
for (auto const &body : m_streamer.water())
|
|
add(body.material, STR_C("On a body of water"));
|
|
return list;
|
|
},
|
|
None, ""};
|
|
}
|
|
|
|
void editor_mode::render_terrain_tool_options()
|
|
{
|
|
// the orthophoto has its settings among the base layers in the layers window, see render_base_layers()
|
|
render_terrain_ui();
|
|
}
|
|
|
|
void editor_mode::render_object_menu()
|
|
{
|
|
if (ImGui::BeginMenu(STR_C("Objects")))
|
|
{
|
|
auto const *selected = dynamic_cast<TAnimModel const *>(m_node);
|
|
if (ImGui::MenuItem(STR_C("Put all instances of the selected model on the ground"), nullptr, false, selected != nullptr && selected->Model() != nullptr))
|
|
drop_model_instances();
|
|
if (ImGui::IsItemHovered(ImGuiHoveredFlags_AllowWhenDisabled))
|
|
ImGui::SetTooltip("%s", STR_C("Select a model in the scene. Every instance of the same model file is moved straight up or down\n"
|
|
"to the ground under it: terrain, large models and terrain made in the editor."));
|
|
ImGui::EndMenu();
|
|
}
|
|
}
|
|
|
|
void editor_mode::add_area_fill_point()
|
|
{
|
|
// like the other placement tools, the point comes from the depth buffer under the cursor
|
|
// (ground geometry only), relative to the camera
|
|
glm::dvec3 const offset = GfxRenderer->Mouse_Position();
|
|
if (glm::length(offset) < 1e-3)
|
|
return; // no ground under the cursor (yet)
|
|
|
|
// the outline gives the fill the height to look for the ground at, and the height of what it finds no ground for
|
|
m_fill_points.push_back(placement_on_ground(Camera.Pos + offset));
|
|
}
|
|
|
|
void editor_mode::undo_last_area_fill()
|
|
{
|
|
// nullify_history_pointers() removes deleted nodes from m_fill_last, so work on a copy
|
|
auto const created = std::move(m_fill_last);
|
|
m_fill_last.clear();
|
|
|
|
for (TAnimModel *model : created)
|
|
{
|
|
if (model == nullptr)
|
|
continue;
|
|
if (m_node == model)
|
|
{
|
|
m_node = nullptr;
|
|
ui()->set_node(nullptr);
|
|
}
|
|
erase_model(model);
|
|
}
|
|
m_fill_status = format(STR_C("Removed %zu objects of the last fill"), created.size());
|
|
}
|
|
|
|
void editor_mode::run_area_fill()
|
|
{
|
|
// limits keeping a single click from freezing the editor for too long
|
|
std::size_t constexpr max_objects = 20000;
|
|
// large model instances (e.g. terrain tiles) are treated as ground, smaller ones (houses, trees) are not
|
|
float constexpr terrain_model_radius = 50.0f;
|
|
// ground is searched up to this far above the height interpolated from the outline points,
|
|
// so hills inside the outline are found but bridges or roofs high above it are not
|
|
double constexpr height_tolerance = 50.0;
|
|
|
|
if (m_fill_points.size() < 3)
|
|
{
|
|
m_fill_status = STR("Outline needs at least 3 points");
|
|
return;
|
|
}
|
|
|
|
// model package
|
|
std::vector<std::string> package;
|
|
if (m_fill_source.kind == model_set_ref::source::manual)
|
|
package = m_fill_custom;
|
|
else
|
|
for (auto const *entry : ui()->nodebank().set_entries(m_fill_source))
|
|
package.push_back(*entry);
|
|
package.erase(std::remove_if(package.begin(), package.end(), [](std::string const &Template) { return Template.empty(); }), package.end());
|
|
if (package.empty())
|
|
{
|
|
m_fill_status = STR("Selected model package is empty");
|
|
return;
|
|
}
|
|
|
|
// area bounds
|
|
glm::dvec2 bmin(std::numeric_limits<double>::max());
|
|
glm::dvec2 bmax(-std::numeric_limits<double>::max());
|
|
for (auto const &p : m_fill_points)
|
|
{
|
|
bmin = glm::min(bmin, glm::dvec2(p.x, p.z));
|
|
bmax = glm::max(bmax, glm::dvec2(p.x, p.z));
|
|
}
|
|
double const area = polygon_area_xz(m_fill_points);
|
|
auto const target = static_cast<std::size_t>(std::min<double>(std::round(area / 10000.0 * std::max(0.0f, m_fill_density)), max_objects));
|
|
if (target == 0)
|
|
{
|
|
m_fill_status = STR("Density too low for this area, nothing to place");
|
|
return;
|
|
}
|
|
|
|
// scatter points: random samples inside the outline, rejecting the ones closer than the minimal spacing
|
|
// to an already accepted point (checked on a hashed grid with cell size == spacing)
|
|
double const spacing = std::max(0.0f, m_fill_min_spacing);
|
|
std::unordered_map<std::int64_t, std::vector<std::size_t>> occupancy;
|
|
auto const cell_key = [](std::int64_t const X, std::int64_t const Z) { return (X << 32) ^ (Z & 0xffffffff); };
|
|
std::vector<glm::dvec2> points;
|
|
points.reserve(target);
|
|
for (std::size_t attempt = 0; attempt < target * 30 && points.size() < target; ++attempt)
|
|
{
|
|
glm::dvec2 const p(LocalRandom(bmin.x, bmax.x), LocalRandom(bmin.y, bmax.y));
|
|
if (false == point_in_polygon_xz(m_fill_points, p.x, p.y))
|
|
continue;
|
|
if (spacing > 0.0)
|
|
{
|
|
auto const cx = static_cast<std::int64_t>(std::floor(p.x / spacing));
|
|
auto const cz = static_cast<std::int64_t>(std::floor(p.y / spacing));
|
|
bool free = true;
|
|
for (std::int64_t dz = -1; dz <= 1 && free; ++dz)
|
|
for (std::int64_t dx = -1; dx <= 1 && free; ++dx)
|
|
{
|
|
auto const lookup = occupancy.find(cell_key(cx + dx, cz + dz));
|
|
if (lookup == occupancy.end())
|
|
continue;
|
|
for (auto const idx : lookup->second)
|
|
if (glm::distance(points[idx], p) < spacing)
|
|
{
|
|
free = false;
|
|
break;
|
|
}
|
|
}
|
|
if (!free)
|
|
continue;
|
|
occupancy[cell_key(cx, cz)].push_back(points.size());
|
|
}
|
|
points.push_back(p);
|
|
}
|
|
|
|
// ground geometry within the area
|
|
std::vector<world_triangle> triangles;
|
|
gather_ground_triangles(bmin, bmax, m_fill_models_as_ground, terrain_model_radius, triangles);
|
|
triangle_grid const ground(std::move(triangles), bmin, bmax);
|
|
auto const terrains = active_terrains();
|
|
|
|
auto const rotation_mode = m_fill_random_rotation ? functions_panel::RANDOM : ui()->rot_mode();
|
|
auto const fixed_rotation_value = ui()->rot_val();
|
|
float const scalemin = std::max(0.01f, std::min(m_fill_scale_min, m_fill_scale_max));
|
|
float const scalemax = std::max(0.01f, std::max(m_fill_scale_min, m_fill_scale_max));
|
|
|
|
std::vector<TAnimModel *> created;
|
|
created.reserve(points.size());
|
|
std::size_t unsupported = 0;
|
|
for (auto const &p : points)
|
|
{
|
|
// reference height: the outline points, weighted by inverse squared distance
|
|
double weights = 0.0, reference = 0.0;
|
|
for (auto const &v : m_fill_points)
|
|
{
|
|
double const w = 1.0 / std::max(1e-6, glm::length2(glm::dvec2(v.x, v.z) - p));
|
|
weights += w;
|
|
reference += w * v.y;
|
|
}
|
|
reference /= weights;
|
|
double const ceiling = reference + height_tolerance;
|
|
|
|
double y = -std::numeric_limits<double>::max();
|
|
bool found = ground.height_at(p.x, p.y, ceiling, y);
|
|
for (editor_terrain *terrain : terrains)
|
|
{
|
|
if (!terrain->contains(p.x, p.y))
|
|
continue;
|
|
double const h = terrain->height_at(p.x, p.y);
|
|
if (h <= ceiling && (!found || h > y))
|
|
{
|
|
y = h;
|
|
found = true;
|
|
}
|
|
}
|
|
if (!found)
|
|
{
|
|
y = reference;
|
|
++unsupported;
|
|
}
|
|
|
|
glm::dvec3 const location(p.x, y, p.y);
|
|
if (!simulation::Region->point_inside(location))
|
|
continue;
|
|
|
|
auto const &src = package[package.size() > 1 ? std::min(package.size() - 1, static_cast<std::size_t>(LocalRandom(0.0, static_cast<double>(package.size())))) : 0];
|
|
// NOTE: no names here either, same as with the brush
|
|
TAnimModel *cloned = simulation::State.create_model(src, std::string{}, location);
|
|
if (!cloned)
|
|
continue;
|
|
apply_rotation_for_new_node(cloned, rotation_mode, fixed_rotation_value);
|
|
if (scalemin != 1.0f || scalemax != 1.0f)
|
|
cloned->Scale(static_cast<float>(LocalRandom(scalemin, scalemax)));
|
|
created.push_back(cloned);
|
|
}
|
|
|
|
// a new fill replaces the "last fill" undo set; the previous objects stay in the scene
|
|
m_fill_last = std::move(created);
|
|
|
|
m_fill_status = format(STR_C("Placed %zu of %zu objects"), m_fill_last.size(), static_cast<std::size_t>(target));
|
|
if (points.size() < target)
|
|
m_fill_status += STR_C(" (limited by min. spacing)");
|
|
if (unsupported > 0)
|
|
m_fill_status += format(STR_C(", without ground under them (height from the outline): %zu"), unsupported);
|
|
WriteLog("Editor: area fill - " + m_fill_status, logtype::generic);
|
|
}
|
|
|
|
void editor_mode::draw_area_fill_outline() const
|
|
{
|
|
if (m_fill_points.empty())
|
|
return;
|
|
|
|
// same camera-relative view and clean perspective the transform gizmo uses
|
|
ImGuiIO const &io = ImGui::GetIO();
|
|
glm::mat4 const view = GfxRenderer->Camera_View_Matrix();
|
|
glm::dvec3 const camerapos = GfxRenderer->Camera_Position();
|
|
float const aspect = io.DisplaySize.y > 0.0f ? io.DisplaySize.x / io.DisplaySize.y : 1.0f;
|
|
glm::mat4 const viewprojection = editor_mode::projection_matrix(aspect) * view;
|
|
|
|
auto const to_clip = [&](glm::dvec3 const &Point) { return viewprojection * glm::vec4(glm::vec3(Point - camerapos), 1.0f); };
|
|
auto const to_screen = [&](glm::vec4 const &Clip) {
|
|
return ImVec2((Clip.x / Clip.w * 0.5f + 0.5f) * io.DisplaySize.x, (0.5f - Clip.y / Clip.w * 0.5f) * io.DisplaySize.y);
|
|
};
|
|
float constexpr nearw = 0.1f;
|
|
|
|
ImDrawList *drawlist = ImGui::GetBackgroundDrawList(ImGui::GetMainViewport());
|
|
ImU32 const edgecolor = IM_COL32(255, 200, 40, 230);
|
|
ImU32 const closingcolor = IM_COL32(255, 200, 40, 110);
|
|
|
|
std::size_t const count = m_fill_points.size();
|
|
for (std::size_t i = 0; i < count; ++i)
|
|
{
|
|
bool const closing = (i + 1 == count);
|
|
if (closing && count < 3)
|
|
break;
|
|
glm::vec4 a = to_clip(m_fill_points[i]);
|
|
glm::vec4 b = to_clip(m_fill_points[(i + 1) % count]);
|
|
// clip the edge against the near plane, so points behind the camera don't flip across the screen
|
|
if (a.w < nearw && b.w < nearw)
|
|
continue;
|
|
if (a.w < nearw)
|
|
a = glm::mix(a, b, (nearw - a.w) / (b.w - a.w));
|
|
else if (b.w < nearw)
|
|
b = glm::mix(b, a, (nearw - b.w) / (a.w - b.w));
|
|
drawlist->AddLine(to_screen(a), to_screen(b), closing ? closingcolor : edgecolor, 2.0f);
|
|
}
|
|
for (std::size_t i = 0; i < count; ++i)
|
|
{
|
|
glm::vec4 const c = to_clip(m_fill_points[i]);
|
|
if (c.w < nearw)
|
|
continue;
|
|
drawlist->AddCircleFilled(to_screen(c), i == 0 ? 6.0f : 4.0f, i == 0 ? IM_COL32(255, 90, 40, 255) : edgecolor);
|
|
}
|
|
}
|
|
|
|
void editor_mode::render_area_fill()
|
|
{
|
|
ImGui::TextDisabled(STR_C("LMB: add outline point Backspace: remove last point"));
|
|
double const area = polygon_area_xz(m_fill_points);
|
|
// the square sign written as its utf-8 bytes: the game is built without /utf-8 where it has the debug symbols
|
|
ImGui::Text(STR_C("Points: %zu Area: %.0f m\xC2\xB2 (%.2f ha)"), m_fill_points.size(), area, area / 10000.0);
|
|
if (ImGui::Button(STR_C("Remove last point")) && !m_fill_points.empty())
|
|
m_fill_points.pop_back();
|
|
ImGui::SameLine();
|
|
if (ImGui::Button(STR_C("Clear outline")))
|
|
m_fill_points.clear();
|
|
|
|
ImGui::Separator();
|
|
|
|
// model package: a hand-assembled list, a user-defined set or a node bank group
|
|
auto &bank = ui()->nodebank();
|
|
bank.set_combo(STR_C("Model set"), m_fill_source, STR_C("Custom list"));
|
|
if (m_fill_source.kind == model_set_ref::source::manual)
|
|
bank.manual_list("fillset", m_fill_custom, m_fill_custom_idx);
|
|
else
|
|
ImGui::TextDisabled(STR_C("%zu templates in set"), bank.set_entries(m_fill_source).size());
|
|
|
|
ImGui::Separator();
|
|
|
|
ImGui::SetNextItemWidth(120.0f);
|
|
ImGui::InputFloat(STR_C("Density (objects/ha)"), &m_fill_density, 10.0f, 100.0f, "%.1f");
|
|
m_fill_density = std::max(0.0f, m_fill_density);
|
|
ImGui::PushID("areafill");
|
|
if (ImGui::TreeNode(STR_C("More settings")))
|
|
{
|
|
ImGui::SetNextItemWidth(120.0f);
|
|
ImGui::InputFloat(STR_C("Min. spacing (m)"), &m_fill_min_spacing, 0.5f, 2.0f, "%.1f");
|
|
m_fill_min_spacing = std::max(0.0f, m_fill_min_spacing);
|
|
ImGui::SetNextItemWidth(200.0f);
|
|
ImGui::DragFloatRange2(STR_C("Scale"), &m_fill_scale_min, &m_fill_scale_max, 0.01f, 0.1f, 5.0f, "min %.2f", "max %.2f");
|
|
ImGui::Checkbox(STR_C("Random rotation"), &m_fill_random_rotation);
|
|
if (!m_fill_random_rotation)
|
|
ui()->render_rotation_controls();
|
|
ImGui::Checkbox(STR_C("Large models count as ground (terrain tiles)"), &m_fill_models_as_ground);
|
|
ImGui::TreePop();
|
|
}
|
|
ImGui::PopID();
|
|
|
|
ImGui::Text(STR_C("Estimated objects: %.0f"), std::round(area / 10000.0 * m_fill_density));
|
|
|
|
if (ImGui::Button(STR_C("Fill area")))
|
|
run_area_fill();
|
|
ImGui::SameLine();
|
|
std::string const undolabel = format(STR_C("Undo last fill (%zu)"), m_fill_last.size());
|
|
if (ImGui::Button(undolabel.c_str()) && !m_fill_last.empty())
|
|
undo_last_area_fill();
|
|
|
|
if (!m_fill_status.empty())
|
|
ImGui::TextUnformatted(m_fill_status.c_str());
|
|
}
|
|
|
|
glm::vec3 editor_mode::array_size(TAnimModel const &Base)
|
|
{
|
|
auto *model = Base.Model();
|
|
if (model == nullptr)
|
|
return glm::vec3{0.0f};
|
|
if (m_array.sized == model)
|
|
return m_array.size;
|
|
// the triangles the other tools take for the ground, left where the model has them
|
|
std::vector<world_triangle> triangles;
|
|
gather_submodel_triangles(model->Root, glm::dmat4{1.0}, triangles);
|
|
if (triangles.empty())
|
|
return glm::vec3{0.0f}; // not loaded yet, or nothing to it; it's asked about again the next time
|
|
glm::dvec3 low{std::numeric_limits<double>::max()};
|
|
glm::dvec3 high{-std::numeric_limits<double>::max()};
|
|
for (auto const &triangle : triangles)
|
|
{
|
|
for (auto const &vertex : triangle)
|
|
{
|
|
low = glm::min(low, vertex);
|
|
high = glm::max(high, vertex);
|
|
}
|
|
}
|
|
m_array.sized = model;
|
|
m_array.size = glm::vec3{high - low};
|
|
return m_array.size;
|
|
}
|
|
|
|
glm::dvec3 editor_mode::array_offset(TAnimModel const &Base)
|
|
{
|
|
auto const &settings = m_array.settings;
|
|
glm::dvec3 offset{0.0};
|
|
if (settings.relative)
|
|
offset += glm::dvec3{settings.relative_offset * array_size(Base) * Base.Scale()};
|
|
if (settings.constant)
|
|
offset += glm::dvec3{settings.constant_offset};
|
|
return offset;
|
|
}
|
|
|
|
int editor_mode::array_count(double const Step) const
|
|
{
|
|
auto const &settings = m_array.settings;
|
|
if (settings.fit == 0)
|
|
return std::clamp(settings.count, 1, array_tool::limit);
|
|
if (Step < array_tool::minimal_step)
|
|
return 1;
|
|
// the model, and a copy for each whole offset the length takes
|
|
return static_cast<int>(std::min<double>(array_tool::limit, std::floor(std::max(0.0f, settings.length) / Step + 1e-6) + 1.0));
|
|
}
|
|
|
|
std::vector<std::pair<glm::dvec3, glm::vec3>> editor_mode::array_placements(TAnimModel &Base)
|
|
{
|
|
// a model this large counts as ground itself, and would be put on top of its own copies
|
|
float constexpr terrain_model_radius = 50.0f;
|
|
|
|
std::vector<std::pair<glm::dvec3, glm::vec3>> places;
|
|
auto const &settings = m_array.settings;
|
|
auto const offset = array_offset(Base);
|
|
auto const count = array_count(glm::length(offset));
|
|
if (count < 2 || glm::length(offset) < array_tool::minimal_step)
|
|
return places;
|
|
|
|
// the offset goes along the axes of the model, which is turned the way the renderer does it: around y, then x, then z
|
|
auto angles = Base.Angles();
|
|
glm::dmat4 turned{1.0};
|
|
turned = glm::rotate(turned, glm::radians(static_cast<double>(angles.y)), glm::dvec3{0.0, 1.0, 0.0});
|
|
turned = glm::rotate(turned, glm::radians(static_cast<double>(angles.x)), glm::dvec3{1.0, 0.0, 0.0});
|
|
turned = glm::rotate(turned, glm::radians(static_cast<double>(angles.z)), glm::dvec3{0.0, 0.0, 1.0});
|
|
auto step = glm::dvec3{turned * glm::dvec4{offset, 0.0}};
|
|
auto location = Base.location();
|
|
places.reserve(count - 1);
|
|
for (int idx = 1; idx < count; ++idx)
|
|
{
|
|
// each copy is turned against the one before it, and leads to the next one the way it faces
|
|
location += step;
|
|
if (false == simulation::Region->point_inside(location))
|
|
break; // the row ends at the edge of the region, nodes past it are left out of the scene
|
|
if (settings.turn != 0.0f)
|
|
{
|
|
step = glm::rotateY(step, glm::radians(static_cast<double>(settings.turn)));
|
|
angles.y = clamp_circular(angles.y + settings.turn, 360.0f);
|
|
}
|
|
places.emplace_back(location, angles);
|
|
}
|
|
|
|
if (settings.ground && Base.radius() < terrain_model_radius)
|
|
{
|
|
// the ground the road tools use. a copy with nothing under it stays at the height the offset gave it
|
|
std::vector<glm::dvec3> points;
|
|
points.reserve(places.size() + 1);
|
|
points.push_back(Base.location());
|
|
for (auto const &place : places)
|
|
points.push_back(place.first);
|
|
std::vector<char> found;
|
|
auto const heights = ground_heights(points, true, &found);
|
|
if (found[0])
|
|
{
|
|
auto const clearance = points[0].y - heights[0];
|
|
for (std::size_t idx = 0; idx < places.size(); ++idx)
|
|
{
|
|
if (found[idx + 1])
|
|
places[idx].first.y = heights[idx + 1] + clearance;
|
|
}
|
|
}
|
|
}
|
|
return places;
|
|
}
|
|
|
|
bool editor_mode::array_live() const
|
|
{
|
|
// the model the array was made of is still selected, and the array is the last thing done
|
|
return m_array.base != nullptr && m_array.base == m_node && false == m_history.empty() && m_history.size() == m_array.step &&
|
|
m_history.back().action == EditorSnapshot::Action::Array;
|
|
}
|
|
|
|
void editor_mode::make_array()
|
|
{
|
|
auto *base = dynamic_cast<TAnimModel *>(m_node);
|
|
if (base == nullptr || false == scene::Layers.editable(base))
|
|
return;
|
|
auto const step = glm::length(array_offset(*base));
|
|
if (step < array_tool::minimal_step)
|
|
{
|
|
m_array.status = STR("The offsets come to nothing, the copies would sit in the model");
|
|
return;
|
|
}
|
|
if (array_count(step) < 2)
|
|
{
|
|
m_array.status = (m_array.settings.fit == 0 ? STR("An array of one is the model itself, nothing to make") : STR("The length takes no copy, nothing to make"));
|
|
return;
|
|
}
|
|
|
|
// a single undo step for the whole array, whatever is done to it while it follows the settings
|
|
trim_history();
|
|
EditorSnapshot snap;
|
|
snap.action = EditorSnapshot::Action::Array;
|
|
snap.node_name = base->name();
|
|
snap.position = base->location();
|
|
snap.layer = base->layer();
|
|
m_history.push_back(std::move(snap));
|
|
g_redo.clear();
|
|
m_array.base = base;
|
|
m_array.step = m_history.size();
|
|
shape_array();
|
|
}
|
|
|
|
void editor_mode::shape_array()
|
|
{
|
|
auto *base = m_array.base;
|
|
auto &copies = m_history.back().copies;
|
|
auto const places = array_placements(*base);
|
|
|
|
// the copies there's no place for anymore go
|
|
while (copies.size() > places.size())
|
|
{
|
|
auto *model = copies.back().model;
|
|
copies.pop_back();
|
|
if (model == nullptr)
|
|
continue;
|
|
erase_model(model);
|
|
}
|
|
|
|
std::string definition;
|
|
for (std::size_t idx = 0; idx < places.size(); ++idx)
|
|
{
|
|
TAnimModel *model = nullptr;
|
|
if (idx < copies.size())
|
|
{
|
|
model = copies[idx].model;
|
|
m_editor.translate(model, places[idx].first, true); // true: the height is set as well
|
|
}
|
|
else
|
|
{
|
|
if (definition.empty())
|
|
base->export_as_text(definition);
|
|
// NOTE: no names for the copies, same as with the brush
|
|
model = simulation::State.create_model(definition, std::string{}, places[idx].first);
|
|
if (model == nullptr)
|
|
break;
|
|
// the copies go where the model is, rather than to the active layer
|
|
scene::Layers.move(model, base->layer());
|
|
EditorSnapshot::array_copy copy;
|
|
copy.model = model;
|
|
copy.uuid = model->uuid;
|
|
copies.push_back(std::move(copy));
|
|
}
|
|
model->Angles(places[idx].second);
|
|
model->Scale(base->Scale());
|
|
}
|
|
|
|
m_array.applied = m_array.settings;
|
|
m_array.location = base->location();
|
|
m_array.angles = base->Angles();
|
|
m_array.scale = base->Scale();
|
|
if (copies.size() < places.size())
|
|
m_array.status = format(STR_C("Only %zu of %zu copies could be made"), copies.size(), places.size());
|
|
else if (copies.empty())
|
|
m_array.status = STR("No copies with these settings");
|
|
else
|
|
m_array.status = format(STR_C("The model and %zu copies; Ctrl+Z takes the array back"), copies.size());
|
|
}
|
|
|
|
void editor_mode::update_array()
|
|
{
|
|
if (m_array.base == nullptr)
|
|
return;
|
|
if (false == array_live())
|
|
{
|
|
// once left, the copies are models like any other
|
|
m_array.base = nullptr;
|
|
return;
|
|
}
|
|
auto const *base = m_array.base;
|
|
if (m_array.settings == m_array.applied && base->location() == m_array.location && base->Angles() == m_array.angles && base->Scale() == m_array.scale)
|
|
return;
|
|
shape_array();
|
|
}
|
|
|
|
void editor_mode::restore_array_snapshot(EditorSnapshot Snapshot, std::vector<EditorSnapshot> &Opposite, bool const Undo)
|
|
{
|
|
// either way the array is done with following the settings
|
|
m_array.base = nullptr;
|
|
for (auto © : Snapshot.copies)
|
|
{
|
|
if (Undo)
|
|
{
|
|
// NOTE: a copy which was deleted and brought back is another model by now, found by its uuid
|
|
auto *model = dynamic_cast<TAnimModel *>(find_node_by_any(copy.model, copy.uuid.to_string(), std::string{}));
|
|
copy.model = nullptr;
|
|
copy.serialized.clear();
|
|
if (model == nullptr)
|
|
continue; // deleted since, and stays that way
|
|
// the copy is brought back the way it is now, with whatever was done to it since the array was made
|
|
model->export_as_text(copy.serialized);
|
|
copy.name = model->name();
|
|
copy.position = model->location();
|
|
copy.rotation = model->Angles();
|
|
copy.scale = model->Scale();
|
|
if (m_node == model)
|
|
{
|
|
m_node = nullptr;
|
|
m_dragging = false;
|
|
ui()->set_node(nullptr);
|
|
}
|
|
erase_model(model);
|
|
}
|
|
else
|
|
{
|
|
if (copy.serialized.empty())
|
|
continue;
|
|
auto *model = simulation::State.create_model(copy.serialized, copy.name, copy.position);
|
|
if (model == nullptr)
|
|
continue;
|
|
scene::Layers.move(model, Snapshot.layer);
|
|
model->Angles(copy.rotation);
|
|
model->Scale(copy.scale);
|
|
model->uuid = copy.uuid;
|
|
add_to_hierarchy(model);
|
|
copy.model = model;
|
|
}
|
|
}
|
|
Opposite.push_back(std::move(Snapshot));
|
|
}
|
|
|
|
void editor_mode::render_array()
|
|
{
|
|
auto &settings = m_array.settings;
|
|
auto *selected = dynamic_cast<TAnimModel *>(m_node);
|
|
if (selected != nullptr && false == scene::Layers.editable(selected))
|
|
selected = nullptr;
|
|
|
|
ImGui::PushID("array");
|
|
ImGui::TextDisabled(STR_C("Copies of the selected model, set out in a row"));
|
|
ImGui::RadioButton(STR_C("Fixed count"), &settings.fit, 0);
|
|
ImGui::SameLine();
|
|
ImGui::RadioButton(STR_C("Fit length"), &settings.fit, 1);
|
|
ImGui::SetNextItemWidth(120.0f);
|
|
if (settings.fit == 0)
|
|
{
|
|
ImGui::InputInt(STR_C("Count"), &settings.count);
|
|
settings.count = std::clamp(settings.count, 1, array_tool::limit);
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("Number of the models in the array, the selected one included"));
|
|
}
|
|
else
|
|
{
|
|
ImGui::InputFloat(STR_C("Length (m)"), &settings.length, 1.0f, 10.0f, "%.2f");
|
|
settings.length = std::max(0.0f, settings.length);
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("As many copies are made as fit in this length, measured along the row"));
|
|
}
|
|
|
|
ImGui::SetNextItemWidth(120.0f);
|
|
ImGui::DragFloat(STR_C("Turn per copy (deg)"), &settings.turn, 0.1f, -180.0f, 180.0f, "%.2f");
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("Each copy is turned by this much around the vertical axis against the one before it,\n"
|
|
"and the row bends with them into an arc"));
|
|
if (ImGui::TreeNode(STR_C("More settings")))
|
|
{
|
|
ImGui::Checkbox(STR_C("Relative offset"), &settings.relative);
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("Distance between the copies as a part of the size of the model, along its axes: x, y (up), z.\n"
|
|
"1 along an axis puts the copies end to end"));
|
|
if (settings.relative)
|
|
{
|
|
ImGui::SetNextItemWidth(200.0f);
|
|
ImGui::DragFloat3(STR_C("x size"), &settings.relative_offset.x, 0.01f, 0.0f, 0.0f, "%.3f");
|
|
}
|
|
ImGui::Checkbox(STR_C("Constant offset"), &settings.constant);
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("Distance between the copies in metres, along the axes of the model: x, y (up), z.\n"
|
|
"With both offsets on the copies are set apart by their sum"));
|
|
if (settings.constant)
|
|
{
|
|
ImGui::SetNextItemWidth(200.0f);
|
|
ImGui::DragFloat3("m", &settings.constant_offset.x, 0.05f, 0.0f, 0.0f, "%.3f");
|
|
}
|
|
ImGui::Checkbox(STR_C("Follow the ground"), &settings.ground);
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("The copies are put as high over the ground as the model is, instead of level with it.\n"
|
|
"Not for the models large enough to count as ground themselves"));
|
|
ImGui::TreePop();
|
|
}
|
|
|
|
if (selected != nullptr)
|
|
{
|
|
auto const size = array_size(*selected) * selected->Scale();
|
|
auto const step = glm::length(array_offset(*selected));
|
|
ImGui::TextDisabled(STR_C("Model %.2f x %.2f x %.2f m, %d in the array, %.2f m apart"), size.x, size.y, size.z, array_count(step), step);
|
|
}
|
|
|
|
if (array_live())
|
|
{
|
|
// NOTE: kept away from the place of the other button, a click too many on which would make the array twice
|
|
ImGui::TextDisabled(STR_C("The array follows the settings"));
|
|
ImGui::SameLine();
|
|
if (ImGui::Button(STR_C("Done")))
|
|
m_array.base = nullptr;
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("The copies stay the way they are. Selecting or changing anything else does the same"));
|
|
}
|
|
else if (selected != nullptr)
|
|
{
|
|
if (ImGui::Button(STR_C("Make array")))
|
|
make_array();
|
|
}
|
|
else
|
|
{
|
|
ImGui::TextDisabled(STR_C("Select a model to make an array of"));
|
|
}
|
|
if (false == m_array.status.empty())
|
|
ImGui::TextUnformatted(m_array.status.c_str());
|
|
ImGui::PopID();
|
|
}
|
|
|
|
void editor_mode::choose_edit_mode(nodebank_panel::edit_mode const Mode)
|
|
{
|
|
// an edit mode is the field of work instead of the tracks, roads or terrain
|
|
m_track_window_open = false;
|
|
m_roadtool.window = false;
|
|
terrain_workspace(false);
|
|
if (Mode != nodebank_panel::MODIFY)
|
|
m_selection.clear();
|
|
ui()->set_mode(Mode);
|
|
}
|
|
|
|
editor_mode::work_area editor_mode::current_work_area() const
|
|
{
|
|
// the terrain is shown over the tracks, see the tool options window
|
|
if (m_terrain_open)
|
|
return work_area::terrain;
|
|
if (m_track_window_open)
|
|
return work_area::tracks;
|
|
if (m_roadtool.window)
|
|
return work_area::roads;
|
|
return work_area::surroundings;
|
|
}
|
|
|
|
void editor_mode::choose_work_area(work_area const Area)
|
|
{
|
|
switch (Area)
|
|
{
|
|
case work_area::surroundings:
|
|
// the edit mode used last
|
|
choose_edit_mode(ui()->nodebank().mode);
|
|
break;
|
|
case work_area::tracks:
|
|
terrain_workspace(false);
|
|
show_track_tab(m_track_tab);
|
|
break;
|
|
case work_area::roads:
|
|
m_track_window_open = false;
|
|
terrain_workspace(false);
|
|
m_roadtool.window = true;
|
|
break;
|
|
case work_area::terrain:
|
|
m_track_window_open = false;
|
|
m_roadtool.window = false;
|
|
terrain_workspace(true);
|
|
break;
|
|
}
|
|
}
|
|
|
|
void editor_mode::render_workspaces()
|
|
{
|
|
struct area
|
|
{
|
|
char const *label;
|
|
work_area which;
|
|
editor_icons::icon picture;
|
|
char const *tooltip;
|
|
};
|
|
area const areas[] = {
|
|
{STR_C("Surroundings"), work_area::surroundings, editor_icons::icon::work_surroundings, STR_C("Models around the line: select, insert, brush, area fill, copy to the node bank")},
|
|
{STR_C("Tracks"), work_area::tracks, editor_icons::icon::work_tracks, STR_C("Tracks and switches, signals, kilometrage and posts along the track, checks of the line")},
|
|
{STR_C("Roads"), work_area::roads, editor_icons::icon::work_roads, STR_C("Roads and junctions, level crossings, the points where the traffic comes and goes")},
|
|
{STR_C("Terrain"), work_area::terrain, editor_icons::icon::work_terrain, STR_C("Heightmap terrain: chunks, sculpting, painting, water, orthophoto")},
|
|
};
|
|
char const *const keys[] = {"F2", "F3", "F4", "F5"};
|
|
auto const current{current_work_area()};
|
|
auto const &style{ImGui::GetStyle()};
|
|
auto *list{ImGui::GetWindowDrawList()};
|
|
// bigger and bold, with the font made for it if there's one, or drawn twice a pixel apart
|
|
auto *font{ui_layer::font_bold != nullptr ? ui_layer::font_bold : ImGui::GetFont()};
|
|
auto const fontsize{ui_layer::font_bold != nullptr ? ui_layer::font_bold->FontSize : ImGui::GetFontSize() * 1.25f};
|
|
auto const height{ImGui::GetWindowHeight()};
|
|
auto const padding{style.FramePadding.x * 3.0f};
|
|
// the icon of the field of work before its name
|
|
auto const iconside{editor_icons::size()};
|
|
auto const spacing{style.ItemInnerSpacing.x * 1.5f};
|
|
render_toolbar_caption(STR_C("Work modes"));
|
|
for (auto const &entry : areas)
|
|
{
|
|
auto const text{font->CalcTextSizeA(fontsize, FLT_MAX, 0.0f, entry.label)};
|
|
ImVec2 const size{text.x + iconside + spacing + padding * 2.0f, height};
|
|
auto const position{ImGui::GetCursorScreenPos()};
|
|
ImGui::PushID(static_cast<int>(entry.which));
|
|
if (ImGui::InvisibleButton("##area", size))
|
|
choose_work_area(entry.which);
|
|
ImGui::PopID();
|
|
auto const hovered{ImGui::IsItemHovered()};
|
|
auto const chosen{entry.which == current};
|
|
ImVec2 const end{position.x + size.x, position.y + size.y};
|
|
if (chosen || hovered)
|
|
list->AddRectFilled(position, end, ImGui::GetColorU32(chosen ? ImGuiCol_Header : ImGuiCol_HeaderHovered));
|
|
if (chosen)
|
|
list->AddRectFilled(ImVec2(position.x, end.y - 3.0f), end, ImGui::GetColorU32(ImGuiCol_CheckMark));
|
|
ImVec2 const textposition{position.x + padding + iconside + spacing, position.y + (height - text.y) * 0.5f};
|
|
auto const color{ImGui::GetColorU32(chosen ? ImGuiCol_Text : ImGuiCol_TextDisabled)};
|
|
editor_icons::draw(list, entry.picture, ImVec2(position.x + padding + iconside * 0.5f, position.y + height * 0.5f), color);
|
|
list->AddText(font, fontsize, textposition, color, entry.label);
|
|
if (ui_layer::font_bold == nullptr)
|
|
list->AddText(font, fontsize, ImVec2(textposition.x + 1.0f, textposition.y), color, entry.label);
|
|
if (hovered)
|
|
ImGui::SetTooltip("%s [%s]", entry.tooltip, keys[static_cast<int>(entry.which)]);
|
|
ImGui::SameLine(0.0f, style.ItemSpacing.x);
|
|
}
|
|
}
|
|
|
|
void editor_mode::render_toolbar()
|
|
{
|
|
// the modes of the gizmo and the top view are over the 3d view, see render_viewport_overlays()
|
|
render_toolbar_tools();
|
|
}
|
|
|
|
void editor_mode::render_edit_menu()
|
|
{
|
|
if (false == ImGui::BeginMenu(STR_C("Edit")))
|
|
return;
|
|
if (ImGui::MenuItem(STR_C("Undo"), "Ctrl+Z", false, false == m_history.empty()))
|
|
undo_last();
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("Takes the last change back"));
|
|
if (ImGui::MenuItem(STR_C("Redo"), "Ctrl+Y", false, false == g_redo.empty()))
|
|
redo_last();
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("Makes the change taken back again"));
|
|
ImGui::Separator();
|
|
auto const selected{m_node != nullptr};
|
|
if (ImGui::MenuItem(STR_C("Delete"), STR_C("Del"), false, selected || m_instance != 0))
|
|
delete_selected();
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("Deletes what's selected: a model, tracks, a road piece or point, a signal, an include of a scenery template"));
|
|
auto const models{dynamic_cast<TAnimModel *>(m_node) != nullptr && ui()->mode() != nodebank_panel::TRACK};
|
|
if (ImGui::MenuItem(STR_C("Copy"), "Ctrl+C", false, models))
|
|
copy_selection();
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("Copies the selected models with their groups"));
|
|
if (ImGui::MenuItem(STR_C("Paste"), "Ctrl+V", false, false == m_clipboard.empty()))
|
|
paste_clipboard(cursor_ground());
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("Puts the copied models at the cursor, around it as they were around the selected one; Ctrl+RMB in the view pastes them where it was clicked"));
|
|
ImGui::Separator();
|
|
if (ImGui::MenuItem(STR_C("Group together"), "Ctrl+G", false, models && selected_nodes().size() > 1))
|
|
group_selection();
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("The selected models move together from now on; a click on one selects them all. Shift+LMB adds a model to the selection"));
|
|
// Delete above may have just dropped the node, selected is from before it
|
|
if (ImGui::MenuItem(STR_C("Ungroup"), "Ctrl+Shift+G", false, m_node != nullptr && m_node->group() > 1))
|
|
ungroup_selection();
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("The models of the group move each by itself again"));
|
|
if (ImGui::MenuItem(STR_C("Drop to the ground"), "End", false, selected))
|
|
drop_selection_to_ground();
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("Puts each selected model, also each model of their groups, down onto the terrain or the object under it"));
|
|
if (ImGui::MenuItem(STR_C("Fly to the selected"), "F", false, selected))
|
|
start_focus(m_node, 0.6);
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("The camera flies to the selected model and looks at it"));
|
|
if (ImGui::MenuItem(STR_C("Find a track by its name"), "Ctrl+F"))
|
|
{
|
|
terrain_workspace(false);
|
|
show_track_tab(m_track_window_open ? m_track_tab : track_tab::path);
|
|
m_track_search.focus = true;
|
|
}
|
|
if (ImGui::MenuItem(STR_C("Bend the selected along the track"), "B", false, ui()->mode() != nodebank_panel::TRACK))
|
|
bend_shortcut();
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("Bends the selected model, e.g. a platform edge or a fence, along the nearest track; the settings are in the inspector"));
|
|
ImGui::EndMenu();
|
|
}
|
|
|
|
void editor_mode::render_help_menu()
|
|
{
|
|
if (false == ImGui::BeginMenu(STR_C("Help")))
|
|
return;
|
|
ImGui::MenuItem(STR_C("Keyboard shortcuts"), "F1", &m_shortcuts_open);
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("The keys of the editor, for each field of work"));
|
|
ImGui::MenuItem(STR_C("Tutorial"), nullptr, &m_first_steps_open);
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("Short lessons: the camera, laying track, curves, the radius at the bends, correcting a curve, joining, switches, switch templates, signals and posts, a whole line step by step, fixing, the gizmo, the grade line, terrain, older sceneries, saving and driving"));
|
|
ImGui::EndMenu();
|
|
}
|
|
|
|
void editor_mode::first_step_done(first_step const Step)
|
|
{
|
|
m_first_steps_done[static_cast<std::size_t>(Step)] = true;
|
|
}
|
|
|
|
void editor_mode::open_kilometrage()
|
|
{
|
|
choose_work_area(work_area::tracks);
|
|
show_track_tab(track_tab::kilometrage);
|
|
}
|
|
|
|
namespace
|
|
{
|
|
|
|
void tutorial_input(char const *Keys, char const *Text, float const Column)
|
|
{
|
|
auto &list{*ImGui::GetWindowDrawList()};
|
|
auto const at{ImGui::GetCursorScreenPos()};
|
|
auto const height{std::round(ImGui::GetTextLineHeight() * 1.45f)};
|
|
auto const gap{std::round(height * 0.2f)};
|
|
float x{0.0f};
|
|
std::istringstream words{Keys};
|
|
for (std::string word; words >> word;)
|
|
{
|
|
ImVec2 const place{at.x + x, at.y};
|
|
if (word == "+")
|
|
{
|
|
auto const size{ImGui::CalcTextSize("+")};
|
|
list.AddText(ImVec2(place.x, std::round(at.y + (height - size.y) * 0.5f)), ImGui::GetColorU32(ImGuiCol_TextDisabled), "+");
|
|
x += size.x + gap;
|
|
}
|
|
else if (word == "LMB" || word == "RMB" || word == "MMB" || word == "wheel" || word == "move")
|
|
x += gesture_mouse(list, place, height, word) + gap;
|
|
else
|
|
x += gesture_key(list, place, height, word) + gap;
|
|
}
|
|
ImGui::Dummy(ImVec2(std::max(x, Column), height));
|
|
ImGui::SameLine();
|
|
ImGui::SetCursorPosY(ImGui::GetCursorPosY() + std::round((height - ImGui::GetTextLineHeight()) * 0.5f));
|
|
ImGui::TextWrapped("%s", STR_C(Text));
|
|
}
|
|
|
|
// a window that grew past the bottom or the right of the screen is moved back onto it
|
|
void keep_on_screen(char const *Name)
|
|
{
|
|
auto const *window{ImGui::FindWindowByName(Name)};
|
|
if (window == nullptr)
|
|
return;
|
|
auto const display{ImGui::GetIO().DisplaySize};
|
|
ImVec2 position{window->Pos};
|
|
position.x = std::max(0.0f, std::min(position.x, display.x - window->Size.x));
|
|
position.y = std::max(20.0f, std::min(position.y, display.y - window->Size.y));
|
|
if (position.x != window->Pos.x || position.y != window->Pos.y)
|
|
ImGui::SetNextWindowPos(position);
|
|
}
|
|
|
|
// the strip of the profile: the ground, the track as it lies, the grade line over them with a point of it dragged up and down,
|
|
// the grades on both sides of it following
|
|
void tutorial_profile_sketch(ImDrawList &List, ImVec2 const Low, ImVec2 const High, double const Time)
|
|
{
|
|
auto const width{High.x - Low.x};
|
|
auto const height{High.y - Low.y};
|
|
auto const x_of = [&](float const Share) { return Low.x + width * (0.06f + 0.88f * Share); };
|
|
auto const y_of = [&](float const Level) { return Low.y + height * (0.82f - 0.6f * Level); };
|
|
std::vector<ImVec2> ground;
|
|
for (int i = 0; i <= 60; ++i)
|
|
{
|
|
auto const share{i / 60.0f};
|
|
ground.emplace_back(x_of(share), y_of(0.25f + 0.35f * std::sin(share * 5.2f + 0.6f) * 0.5f + 0.18f * share));
|
|
}
|
|
auto const flags{List.Flags};
|
|
List.Flags &= ~ImDrawListFlags_AntiAliasedFill;
|
|
for (std::size_t i = 0; i + 1 < ground.size(); ++i)
|
|
List.AddQuadFilled(ground[i], ground[i + 1], ImVec2(ground[i + 1].x, High.y), ImVec2(ground[i].x, High.y), IM_COL32(110, 85, 55, 70));
|
|
List.Flags = flags;
|
|
List.AddPolyline(ground.data(), static_cast<int>(ground.size()), IM_COL32(170, 130, 80, 220), 0, 1.5f);
|
|
auto const lift{static_cast<float>(0.5 + 0.5 * std::sin(Time * 1.6))};
|
|
std::array const points{ImVec2(x_of(0.0f), y_of(0.32f)), ImVec2(x_of(0.38f), y_of(0.42f)), ImVec2(x_of(0.66f), y_of(0.35f + 0.4f * lift)), ImVec2(x_of(1.0f), y_of(0.55f))};
|
|
List.AddPolyline(points.data(), static_cast<int>(points.size()), IM_COL32(170, 170, 170, 160), 0, 1.0f);
|
|
List.AddPolyline(points.data(), static_cast<int>(points.size()), IM_COL32(90, 220, 110, 255), 0, 2.5f);
|
|
for (std::size_t i = 0; i < points.size(); ++i)
|
|
List.AddCircleFilled(points[i], i == 2 ? 6.0f : 4.5f, i == 2 ? kGestureLit : IM_COL32(250, 210, 80, 255));
|
|
List.AddCircle(points[2], 9.0f, kGestureLit, 0, 1.5f);
|
|
for (std::size_t i = 0; i + 1 < points.size(); ++i)
|
|
{
|
|
auto const grade{-(points[i + 1].y - points[i].y) / (points[i + 1].x - points[i].x) * 40.0f};
|
|
auto const text{std::format("{:+.1f}", std::abs(grade) < 0.05f ? 0.0f : grade)};
|
|
ImVec2 const middle{(points[i].x + points[i + 1].x) * 0.5f, (points[i].y + points[i + 1].y) * 0.5f - ImGui::GetTextLineHeight() - 2.0f};
|
|
List.AddText(ImVec2(middle.x - ImGui::CalcTextSize(text.c_str()).x * 0.5f, middle.y), i == 0 ? IM_COL32(200, 200, 200, 255) : IM_COL32(255, 255, 255, 255), text.c_str());
|
|
}
|
|
gesture_mouse(List, ImVec2(points[2].x + 12.0f, points[2].y + 10.0f), height * 0.18f, "LMB");
|
|
}
|
|
|
|
// the points of a switch clicked one after another: its start, the ends of its two tracks, the way on, the points along the diverging track
|
|
void tutorial_template_sketch(ImDrawList &List, ImVec2 const Low, ImVec2 const High, double const Time)
|
|
{
|
|
auto const width{High.x - Low.x};
|
|
auto const height{High.y - Low.y};
|
|
auto const at = [&](float const X, float const Y) { return ImVec2(Low.x + width * X, Low.y + height * Y); };
|
|
auto const curve = [&](float const Share) { return at(0.08f + 0.70f * Share, 0.72f - 0.42f * Share * Share); };
|
|
auto const shown{static_cast<int>(std::fmod(static_cast<float>(Time), 10.0f))};
|
|
std::vector<ImVec2> line;
|
|
for (int i = 0; i <= 24; ++i)
|
|
line.push_back(curve(static_cast<float>(i) / 24.0f));
|
|
List.AddLine(at(0.08f, 0.72f), at(0.78f, 0.72f), IM_COL32(150, 150, 150, 130), 3.0f);
|
|
List.AddPolyline(line.data(), static_cast<int>(line.size()), IM_COL32(150, 150, 150, 130), ImDrawFlags_None, 3.0f);
|
|
std::array<ImVec2, 8> const points{at(0.08f, 0.72f), at(0.78f, 0.72f), curve(1.0f), at(0.94f, 0.14f), curve(0.28f), curve(0.5f), curve(0.72f), curve(0.88f)};
|
|
if (shown >= 1)
|
|
List.AddLine(points[0], points[1], IM_COL32(255, 255, 255, 230), 1.5f);
|
|
if (shown >= 3)
|
|
List.AddLine(points[2], points[3], IM_COL32(90, 200, 255, 230), 1.5f);
|
|
for (int i = 0; i < static_cast<int>(points.size()) && i <= shown; ++i)
|
|
{
|
|
List.AddCircleFilled(points[i], 4.0f, i < 4 ? IM_COL32(255, 225, 60, 255) : IM_COL32(120, 255, 120, 255));
|
|
if (i < 4)
|
|
List.AddText(ImVec2(points[i].x + 6.0f, points[i].y - 18.0f), IM_COL32(255, 255, 255, 255), std::to_string(i + 1).c_str());
|
|
}
|
|
if (shown >= 8)
|
|
List.AddPolyline(line.data(), static_cast<int>(line.size()), IM_COL32(255, 90, 200, 255), ImDrawFlags_None, 2.0f);
|
|
}
|
|
|
|
// the radius of the curve at a bend: the two straights clicked stay, the curve between them grows from sharp to gentle and back
|
|
void tutorial_corner_sketch(ImDrawList &List, ImVec2 const Low, ImVec2 const High, double const Time)
|
|
{
|
|
auto const width{High.x - Low.x};
|
|
auto const height{High.y - Low.y};
|
|
glm::vec2 const from{Low.x + width * 0.04f, Low.y + height * 0.80f};
|
|
glm::vec2 const vertex{Low.x + width * 0.50f, Low.y + height * 0.18f};
|
|
glm::vec2 const to{Low.x + width * 0.96f, Low.y + height * 0.80f};
|
|
auto const point = [](glm::vec2 const Point) { return ImVec2(Point.x, Point.y); };
|
|
List.AddLine(point(from), point(vertex), IM_COL32(150, 150, 150, 130), 1.0f);
|
|
List.AddLine(point(vertex), point(to), IM_COL32(150, 150, 150, 130), 1.0f);
|
|
List.AddCircleFilled(point(vertex), 4.0f, IM_COL32(255, 255, 255, 255));
|
|
// there and back in 8 s, a moment at each end
|
|
auto const cycle{std::fmod(static_cast<float>(Time), 8.0f) / 8.0f};
|
|
auto const swing{std::clamp(1.3f - std::abs(cycle * 2.0f - 1.0f) * 1.6f, 0.0f, 1.0f)};
|
|
auto const share{swing * swing * (3.0f - 2.0f * swing)};
|
|
auto const in{glm::normalize(from - vertex)};
|
|
auto const out{glm::normalize(to - vertex)};
|
|
auto const tangent{glm::mix(0.12f, 0.92f, share) * glm::length(from - vertex)};
|
|
auto const half{std::acos(glm::dot(in, out)) * 0.5f};
|
|
auto const centre{vertex + glm::normalize(in + out) * (tangent / std::cos(half))};
|
|
auto const start{vertex + in * tangent};
|
|
auto const end{vertex + out * tangent};
|
|
auto const begin{std::atan2(start.y - centre.y, start.x - centre.x)};
|
|
auto sweep{std::atan2(end.y - centre.y, end.x - centre.x) - begin};
|
|
while (sweep > glm::pi<float>())
|
|
sweep -= glm::two_pi<float>();
|
|
while (sweep < -glm::pi<float>())
|
|
sweep += glm::two_pi<float>();
|
|
auto const radius{glm::length(start - centre)};
|
|
std::vector line{point(from)};
|
|
for (int i = 0; i <= 32; ++i)
|
|
{
|
|
auto const angle{begin + sweep * static_cast<float>(i) / 32.0f};
|
|
line.push_back(ImVec2(centre.x + radius * std::cos(angle), centre.y + radius * std::sin(angle)));
|
|
}
|
|
line.push_back(point(to));
|
|
List.AddPolyline(line.data(), static_cast<int>(line.size()), IM_COL32(230, 190, 90, 255), ImDrawFlags_None, 3.0f);
|
|
auto const label{format(STR_C("R %.0f m: %s"), glm::mix(300.0, 6000.0, static_cast<double>(share)), share < 0.5f ? STR_C("a sharp curve, a slow train") : STR_C("a gentle curve, a fast train"))};
|
|
List.AddText(ImVec2(Low.x + (width - ImGui::CalcTextSize(label.c_str()).x) * 0.5f, High.y - ImGui::GetTextLineHeight() - 4.0f), IM_COL32(235, 235, 235, 255), label.c_str());
|
|
}
|
|
|
|
// the route of the grade line picked on the map: a click lights up the whole line through the track, Shift and a box only the
|
|
// tracks between the outermost ones in it; beside it the strip with a point of the line dragged
|
|
void tutorial_route_sketch(ImDrawList &List, ImVec2 const Low, ImVec2 const High, double const Time)
|
|
{
|
|
auto const split{std::round(Low.x + (High.x - Low.x) * 0.48f)};
|
|
tutorial_profile_sketch(List, ImVec2(split + 6.0f, Low.y), High, Time);
|
|
List.AddLine(ImVec2(split + 2.0f, Low.y + 6.0f), ImVec2(split + 2.0f, High.y - 6.0f), ImGui::GetColorU32(ImGuiCol_Border), 1.0f);
|
|
auto const width{split - Low.x};
|
|
auto const height{High.y - Low.y};
|
|
auto const at = [&](float const X, float const Y) { return ImVec2(Low.x + width * X, Low.y + height * Y); };
|
|
auto const mix = [](ImVec2 const A, ImVec2 const B, float const T) { return ImVec2(A.x + (B.x - A.x) * T, A.y + (B.y - A.y) * T); };
|
|
auto const ease = [](float const T) { auto const t{std::clamp(T, 0.0f, 1.0f)}; return t * t * (3.0f - 2.0f * t); };
|
|
// the joints of the tracks of the line, and a siding going off it at a switch
|
|
std::array const joints{at(0.04f, 0.72f), at(0.18f, 0.64f), at(0.32f, 0.54f), at(0.46f, 0.48f), at(0.60f, 0.46f), at(0.74f, 0.42f), at(0.88f, 0.32f), at(0.98f, 0.24f)};
|
|
int constexpr tracks{7};
|
|
List.AddBezierQuadratic(joints[3], at(0.58f, 0.52f), at(0.80f, 0.66f), IM_COL32(130, 130, 130, 200), 2.0f);
|
|
auto const cycle{static_cast<float>(std::fmod(Time, 8.0))};
|
|
bool const boxing{cycle >= 4.0f};
|
|
int first{0};
|
|
int last{tracks - 1};
|
|
bool lit{false};
|
|
ImVec2 cursor;
|
|
if (false == boxing)
|
|
{
|
|
auto const target{mix(joints[4], joints[5], 0.5f)};
|
|
cursor = mix(at(0.75f, 0.92f), target, ease(cycle / 1.0f));
|
|
lit = cycle > 1.3f;
|
|
}
|
|
else
|
|
{
|
|
auto const corner{at(0.29f, 0.28f)};
|
|
auto const drag{ease((cycle - 4.6f) / 1.5f)};
|
|
auto const other{mix(corner, at(0.72f, 0.70f), drag)};
|
|
cursor = cycle < 4.6f ? mix(at(0.75f, 0.92f), corner, ease((cycle - 4.0f) / 0.6f)) : other;
|
|
if (cycle >= 4.6f && cycle < 6.6f)
|
|
{
|
|
List.AddRectFilled(corner, other, IM_COL32(90, 175, 255, 40));
|
|
List.AddRect(corner, other, kGestureLit, 0.0f, 0, 1.5f);
|
|
}
|
|
lit = cycle >= 6.2f;
|
|
first = 2;
|
|
last = 4;
|
|
gesture_key(List, ImVec2(Low.x + 6.0f, Low.y + 6.0f), std::round(ImGui::GetTextLineHeight() * 1.3f), "Shift");
|
|
}
|
|
for (int i = 0; i < tracks; ++i)
|
|
{
|
|
auto const on{lit && i >= first && i <= last};
|
|
List.AddLine(joints[i], joints[i + 1], on ? IM_COL32(90, 220, 110, 255) : IM_COL32(170, 170, 170, 220), on ? 4.0f : 2.0f);
|
|
}
|
|
for (auto const &joint : joints)
|
|
List.AddCircleFilled(joint, 2.5f, IM_COL32(220, 220, 220, 255));
|
|
gesture_mouse(List, ImVec2(cursor.x + 2.0f, cursor.y + 2.0f), std::round(height * 0.16f), "LMB");
|
|
auto const caption{boxing ? STR_C("Shift + a box: between the outermost tracks") : STR_C("LMB on a track: its whole line")};
|
|
List.AddText(ImVec2(Low.x + 6.0f, High.y - ImGui::GetTextLineHeight() - 4.0f), IM_COL32(230, 230, 230, 230), caption);
|
|
}
|
|
|
|
// a signal put by a track: pressed beside it and dragged along, the arrow tells the way of the trains which see it; then the
|
|
// hectometre posts of the line stand up one after the other
|
|
void tutorial_signal_sketch(ImDrawList &List, ImVec2 const Low, ImVec2 const High, double const Time)
|
|
{
|
|
auto const width{High.x - Low.x};
|
|
auto const height{High.y - Low.y};
|
|
auto const at = [&](float const X, float const Y) { return ImVec2(Low.x + width * X, Low.y + height * Y); };
|
|
auto const ease = [](float const T) { auto const t{std::clamp(T, 0.0f, 1.0f)}; return t * t * (3.0f - 2.0f * t); };
|
|
auto const cycle{static_cast<float>(std::fmod(Time, 8.0))};
|
|
// the track seen from above: sleepers and the two rails
|
|
auto const middle{at(0.0f, 0.5f).y};
|
|
auto const gauge{height * 0.07f};
|
|
for (int sleeper = 0; sleeper < 40; ++sleeper)
|
|
{
|
|
auto const x{at(0.02f + 0.025f * static_cast<float>(sleeper), 0.0f).x};
|
|
List.AddLine(ImVec2(x, middle - gauge * 1.6f), ImVec2(x, middle + gauge * 1.6f), IM_COL32(110, 90, 70, 255), 3.0f);
|
|
}
|
|
List.AddLine(ImVec2(Low.x, middle - gauge), ImVec2(High.x, middle - gauge), IM_COL32(200, 200, 205, 255), 2.0f);
|
|
List.AddLine(ImVec2(Low.x, middle + gauge), ImVec2(High.x, middle + gauge), IM_COL32(200, 200, 205, 255), 2.0f);
|
|
auto const line{ImGui::GetTextLineHeight()};
|
|
if (cycle < 4.0f)
|
|
{
|
|
// pressed beside the track, dragged along it
|
|
auto const press{at(0.32f, 0.67f)};
|
|
auto const drag{ease((cycle - 1.0f) / 1.4f)};
|
|
ImVec2 const cursor{cycle < 1.0f ? ImVec2(press.x + (1.0f - ease(cycle)) * width * 0.3f, press.y + (1.0f - ease(cycle)) * height * 0.2f) : ImVec2(press.x + width * 0.3f * drag, press.y)};
|
|
if (cycle >= 1.0f)
|
|
{
|
|
ImVec2 const tip{cursor.x, press.y};
|
|
List.AddLine(press, tip, IM_COL32(255, 210, 60, 255), 3.0f);
|
|
if (drag > 0.2f)
|
|
List.AddTriangleFilled(ImVec2(tip.x + 8.0f, tip.y), ImVec2(tip.x - 4.0f, tip.y - 7.0f), ImVec2(tip.x - 4.0f, tip.y + 7.0f), IM_COL32(255, 210, 60, 255));
|
|
}
|
|
if (cycle >= 2.6f)
|
|
{
|
|
// the signal by the track: the mast and the head with its lights
|
|
auto const foot{at(0.32f, 0.98f)};
|
|
List.AddLine(foot, ImVec2(foot.x, foot.y - height * 0.06f), IM_COL32(200, 200, 200, 255), 3.0f);
|
|
ImVec2 const head_low{foot.x - height * 0.04f, foot.y - height * 0.27f};
|
|
ImVec2 const head_high{foot.x + height * 0.04f, foot.y - height * 0.06f};
|
|
List.AddRectFilled(head_low, head_high, IM_COL32(25, 25, 25, 255), height * 0.03f);
|
|
List.AddRect(head_low, head_high, IM_COL32(150, 150, 150, 255), height * 0.03f);
|
|
std::array const lights{IM_COL32(230, 60, 50, 255), IM_COL32(70, 210, 90, 255), IM_COL32(240, 240, 240, 255)};
|
|
for (std::size_t i = 0; i < lights.size(); ++i)
|
|
List.AddCircleFilled(ImVec2(foot.x, head_low.y + height * (0.04f + 0.065f * static_cast<float>(i))), height * 0.025f, lights[i]);
|
|
List.AddText(ImVec2(foot.x - height * 0.06f - ImGui::CalcTextSize("S1").x, foot.y - line), IM_COL32(255, 255, 255, 230), "S1");
|
|
}
|
|
gesture_mouse(List, ImVec2(cursor.x + 2.0f, cursor.y + 2.0f), std::round(height * 0.16f), "LMB");
|
|
List.AddText(ImVec2(Low.x + 6.0f, Low.y + 4.0f), IM_COL32(230, 230, 230, 230), STR_C("LMB by the track, drag along: the way the trains run"));
|
|
return;
|
|
}
|
|
// the hectometre posts of the line, one after the other
|
|
auto const shown{static_cast<int>((cycle - 4.3f) / 0.35f) + 1};
|
|
for (int i = 0; i < std::min(shown, 9); ++i)
|
|
{
|
|
auto const x{at(0.07f + 0.105f * static_cast<float>(i), 0.0f).x};
|
|
auto const foot{middle - gauge * 3.2f};
|
|
List.AddRectFilled(ImVec2(x - 3.0f, foot - height * 0.14f), ImVec2(x + 3.0f, foot), IM_COL32(240, 240, 240, 255), 1.0f);
|
|
auto const text{std::format("12.{}", i + 1)};
|
|
auto const size{ImGui::CalcTextSize(text.c_str())};
|
|
List.AddText(ImVec2(std::round(x - size.x * 0.5f), foot - height * 0.14f - size.y - 1.0f), IM_COL32(255, 220, 120, 255), text.c_str());
|
|
}
|
|
List.AddText(ImVec2(Low.x + 6.0f, High.y - line - 4.0f), IM_COL32(230, 230, 230, 230), STR_C("B: posts every 100 m along the whole line at once"));
|
|
}
|
|
|
|
// a vehicle seen from the side, drawn simply: the body with its windows on two bogies
|
|
void tutorial_vehicle(ImDrawList &List, ImVec2 const Low, ImVec2 const High, ImU32 const Body, bool const Locomotive)
|
|
{
|
|
auto const width{High.x - Low.x};
|
|
auto const height{High.y - Low.y};
|
|
auto const wheel{height * 0.14f};
|
|
ImVec2 const body_high{High.x, High.y - wheel * 1.6f};
|
|
List.AddRectFilled(Low, body_high, Body, height * 0.12f);
|
|
auto const windows{Locomotive ? 2 : 5};
|
|
for (int i = 0; i < windows; ++i)
|
|
{
|
|
// a locomotive has a window at each end, a coach a row of them
|
|
auto window_x{Low.x + width * (0.08f + 0.18f * static_cast<float>(i))};
|
|
if (Locomotive)
|
|
window_x = (i == 0 ? Low.x + width * 0.06f : High.x - width * 0.2f);
|
|
auto const size{Locomotive ? width * 0.14f : width * 0.12f};
|
|
List.AddRectFilled(ImVec2(window_x, Low.y + height * 0.15f), ImVec2(window_x + size, Low.y + height * 0.42f), IM_COL32(30, 40, 50, 255), 2.0f);
|
|
}
|
|
for (float const share : {0.22f, 0.78f})
|
|
{
|
|
ImVec2 const middle{Low.x + width * share, High.y - wheel};
|
|
List.AddCircleFilled(ImVec2(middle.x - wheel * 1.1f, middle.y), wheel, IM_COL32(40, 40, 40, 255));
|
|
List.AddCircleFilled(ImVec2(middle.x + wheel * 1.1f, middle.y), wheel, IM_COL32(40, 40, 40, 255));
|
|
}
|
|
}
|
|
|
|
// the trainset tool: a double click on the list puts a vehicle into the train, the train grows on the track, Place and drive
|
|
// and it runs off
|
|
void tutorial_trainset_sketch(ImDrawList &List, ImVec2 const Low, ImVec2 const High, double const Time)
|
|
{
|
|
auto const width{High.x - Low.x};
|
|
auto const height{High.y - Low.y};
|
|
auto const at = [&](float const X, float const Y) { return ImVec2(Low.x + width * X, Low.y + height * Y); };
|
|
auto const cycle{static_cast<float>(std::fmod(Time, 9.0))};
|
|
std::array const colours{IM_COL32(200, 60, 50, 255), IM_COL32(60, 120, 70, 255), IM_COL32(70, 100, 160, 255)};
|
|
auto const line{ImGui::GetTextLineHeight()};
|
|
// the list: the side view of each vehicle and its name
|
|
for (std::size_t i = 0; i < colours.size(); ++i)
|
|
{
|
|
auto const slot{static_cast<float>(i)};
|
|
auto const top{0.08f + 0.28f * slot};
|
|
// lit while it's double clicked
|
|
if (cycle > 0.8f + 1.4f * slot && cycle < 1.2f + 1.4f * slot)
|
|
List.AddRectFilled(at(0.02f, top - 0.02f), at(0.40f, top + 0.24f), IM_COL32(90, 175, 255, 70), 3.0f);
|
|
tutorial_vehicle(List, at(0.03f, top), at(0.16f, top + 0.2f), colours[i], i == 0);
|
|
List.AddRectFilled(at(0.19f, top + 0.03f), at(0.36f, top + 0.03f + line / height * 0.6f), IM_COL32(220, 220, 220, 200), 2.0f);
|
|
List.AddRectFilled(at(0.19f, top + 0.12f), at(0.31f, top + 0.12f + line / height * 0.5f), IM_COL32(150, 150, 150, 160), 2.0f);
|
|
}
|
|
// the cursor goes down the list double clicking, then to the button
|
|
auto const row{std::min(2, static_cast<int>(std::max(0.0f, cycle - 0.4f) / 1.4f))};
|
|
ImVec2 cursor{at(0.30f, 0.16f + 0.28f * static_cast<float>(row))};
|
|
auto const added{std::clamp(static_cast<int>((cycle - 0.8f) / 1.4f) + 1, 0, 3)};
|
|
auto const button_low{at(0.55f, 0.08f)};
|
|
auto const button_high{at(0.95f, 0.30f)};
|
|
if (cycle > 4.6f)
|
|
cursor = ImVec2((button_low.x + button_high.x) * 0.5f, (button_low.y + button_high.y) * 0.5f);
|
|
bool const pressed{cycle > 5.2f && cycle < 5.6f};
|
|
List.AddRectFilled(button_low, button_high, pressed ? IM_COL32(60, 170, 75, 255) : IM_COL32(50, 140, 64, 255), 4.0f);
|
|
auto const label{STR_C("Place and drive")};
|
|
auto const size{ImGui::CalcTextSize(label)};
|
|
List.AddText(ImVec2(std::round((button_low.x + button_high.x - size.x) * 0.5f), std::round((button_low.y + button_high.y - size.y) * 0.5f)), IM_COL32(255, 255, 255, 255), label);
|
|
// the track and the train on it, the head on the left; after the button it runs off
|
|
auto const rail{at(0.0f, 0.86f).y};
|
|
List.AddLine(ImVec2(at(0.44f, 0.0f).x, rail), ImVec2(High.x, rail), IM_COL32(170, 170, 170, 255), 2.0f);
|
|
auto const run{cycle > 5.6f ? (cycle - 5.6f) * (cycle - 5.6f) * width * 0.06f : 0.0f};
|
|
auto const car{width * 0.15f};
|
|
List.PushClipRect(ImVec2(at(0.44f, 0.0f).x, Low.y), High, true);
|
|
for (std::size_t i = 0; i < static_cast<std::size_t>(added); ++i)
|
|
{
|
|
auto const front{at(0.46f, 0.0f).x + (car + 3.0f) * static_cast<float>(i) - run};
|
|
tutorial_vehicle(List, ImVec2(front, rail - height * 0.24f), ImVec2(front + car, rail), colours[i], i == 0);
|
|
}
|
|
List.PopClipRect();
|
|
gesture_mouse(List, ImVec2(cursor.x + 2.0f, cursor.y + 2.0f), std::round(height * 0.16f), "LMB");
|
|
if (cycle < 4.6f)
|
|
List.AddText(ImVec2(cursor.x + height * 0.16f, cursor.y), IM_COL32(255, 220, 120, 255), "x2");
|
|
}
|
|
|
|
// the terrain model under the tracks: the track laid level sinks onto the ground along, the formation and the slopes under it
|
|
void tutorial_terrain_sketch(ImDrawList &List, ImVec2 const Low, ImVec2 const High, double const Time)
|
|
{
|
|
auto const width{High.x - Low.x};
|
|
auto const height{High.y - Low.y};
|
|
auto const phase{static_cast<float>(std::fmod(Time * 0.3, 1.4))};
|
|
auto const settle{std::clamp(phase / 0.8f, 0.0f, 1.0f)};
|
|
auto const eased{settle * settle * (3.0f - 2.0f * settle)};
|
|
auto const ground_at = [&](float const Share) { return 0.45f + 0.22f * std::sin(Share * 4.0f) + 0.08f * std::sin(Share * 13.0f); };
|
|
auto const smooth_at = [&](float const Share) { return 0.45f + 0.18f * std::sin(Share * 4.0f); };
|
|
auto const x_of = [&](float const Share) { return Low.x + width * Share; };
|
|
auto const y_of = [&](float const Level) { return Low.y + height * (0.95f - 0.75f * Level); };
|
|
int constexpr steps{80};
|
|
std::vector<ImVec2> ground;
|
|
std::vector<ImVec2> track;
|
|
for (int i = 0; i <= steps; ++i)
|
|
{
|
|
auto const share{static_cast<float>(i) / steps};
|
|
ground.emplace_back(x_of(share), y_of(ground_at(share)));
|
|
track.emplace_back(x_of(share), y_of(0.55f + (smooth_at(share) + 0.04f - 0.55f) * eased));
|
|
}
|
|
auto const flags{List.Flags};
|
|
List.Flags &= ~ImDrawListFlags_AntiAliasedFill;
|
|
for (int i = 0; i < steps; ++i)
|
|
{
|
|
std::array const quad{ground[i], ground[i + 1], ImVec2(ground[i + 1].x, High.y), ImVec2(ground[i].x, High.y)};
|
|
List.AddConvexPolyFilled(quad.data(), static_cast<int>(quad.size()), IM_COL32(95, 120, 70, 120));
|
|
}
|
|
if (eased > 0.99f)
|
|
for (int i = 0; i < steps; ++i)
|
|
{
|
|
auto const fill{track[i].y < ground[i].y};
|
|
List.AddQuadFilled(track[i], track[i + 1], ground[i + 1], ground[i], fill ? IM_COL32(190, 150, 90, 150) : IM_COL32(60, 45, 30, 150));
|
|
}
|
|
List.Flags = flags;
|
|
List.AddPolyline(ground.data(), static_cast<int>(ground.size()), IM_COL32(150, 190, 110, 255), 0, 1.5f);
|
|
List.AddPolyline(track.data(), static_cast<int>(track.size()), IM_COL32(230, 230, 230, 255), 0, 3.0f);
|
|
auto const label{eased > 0.99f ? STR_C("embankment and cutting") : STR_C("the terrain model")};
|
|
List.AddText(ImVec2(Low.x + 6.0f, Low.y + 4.0f), IM_COL32(220, 220, 220, 200), label);
|
|
}
|
|
|
|
} // namespace
|
|
|
|
// a lesson of the tutorial: its clip or sketch, the mouse and the keys it teaches, the steps to try and the button under it
|
|
struct editor_mode::tutorial_lesson
|
|
{
|
|
// what the button under a lesson does: opens the tool the lesson is about, or switches the view
|
|
enum class trial { reading, top, lay, turnout, select, profile, terrain, plan, trainset, signals, station };
|
|
struct input
|
|
{
|
|
char const *keys;
|
|
char const *text;
|
|
};
|
|
struct goal
|
|
{
|
|
first_step step;
|
|
char const *text;
|
|
};
|
|
char const *title;
|
|
char const *clip;
|
|
std::vector<input> inputs;
|
|
std::vector<goal> goals;
|
|
trial action;
|
|
void (*sketch)(ImDrawList &, ImVec2, ImVec2, double){nullptr};
|
|
};
|
|
|
|
std::vector<editor_mode::tutorial_lesson> const &editor_mode::tutorial_lessons()
|
|
{
|
|
using trial = tutorial_lesson::trial;
|
|
static std::vector<tutorial_lesson> const lessons{
|
|
{"Looking around",
|
|
"camera",
|
|
{{"RMB + move", "Hold the right mouse button and move the mouse to look around"},
|
|
{"RMB + W S A D", "Keep holding the right button and press W S A D to fly around; E takes you up, Q down"},
|
|
{"O", "Switches between the view from above, like a map, and the normal 3D view"},
|
|
{"wheel", "Zooms in and out at the mouse pointer"},
|
|
{"MMB + move", "Press the wheel down and drag to move the view, from above and in 3D"},
|
|
{"Y", "Rides the camera along the track under the mouse pointer, as from a train; Y again gets off. The tools keep working on the way"},
|
|
{"RMB + W S A D", "While riding: W and S drive, Shift faster; A and D jump to the next track on the left or right; Z picks the way at the next switch"},
|
|
{"F", "Flies to what you have selected"}},
|
|
{{first_step::look, "Look around with the right mouse button held"}, {first_step::top, "Press O: from above to 3D, or back"}, {first_step::ride, "Ride along a track with Y"}},
|
|
trial::top},
|
|
{"Laying track",
|
|
"lay",
|
|
{{"F3", "Opens Tracks, the part of the editor where track is laid"},
|
|
{"L", "Turns laying on"},
|
|
{"LMB", "Click the ground where the track should start, or the end of a track to carry it on"},
|
|
{"LMB", "Click again wherever the track should turn; the curves are made for you. Until you press Enter it is only a line, not a track"},
|
|
{"Enter", "Lays the track along the line. To carry on, click its end"},
|
|
{"Backspace", "Removes the last point you clicked"},
|
|
{"Esc", "Throws away the points not laid yet, but only when pressed twice within 3 seconds: the first press just warns. With no points left, Esc stops laying"}},
|
|
{{first_step::tracks, "Open Tracks (F3)"}, {first_step::lay, "Turn laying on (L)"}, {first_step::laid, "Click a few points and press Enter"}},
|
|
trial::lay},
|
|
{"Curves",
|
|
"curves",
|
|
{{"LMB", "Every place where the line turns gets a curve, as big as fits. An orange label means the curve breaks the rules for the speed set in the panel"},
|
|
{"Tab", "To copy a curve from the aerial photo: press Tab, then click points along the middle of the curve; it ends at the last one"},
|
|
{"Alt", "Hold it while clicking: the direction jumps in steps of 15 degrees, or to the angle of a switch to a straight track nearby"},
|
|
{"0 1 2 3", "After the first point: type a number and press Enter, and the next straight piece is that many metres long"},
|
|
{"wheel", "The wheel alone zooms, as everywhere"}},
|
|
{{first_step::bend, "Lay a track that turns"}, {first_step::trace, "Press Tab to copy a curve from the photo"}},
|
|
trial::lay},
|
|
{"Radius of the curves at the bends",
|
|
nullptr,
|
|
{{"LMB", "Where the line turns, two straight pieces meet at a corner no train could take, so the editor rounds it off with a curve"},
|
|
{"R", "The radius tells how big the curve is, in metres: the bigger it is, the gentler the curve and the faster a train can go round it"},
|
|
{"R", "The editor picks the biggest curve that fits between your points. A slight turn gets only a gentle easing in and out; a sharper one gets a real curve, eased in and out, with the outer rail raised, as the railway rules say"},
|
|
{"LMB", "Points too close together leave little room, so the curve comes out smaller. When it no longer meets the rules, its label turns orange: click the points further apart"},
|
|
{"R L h", "The label of a curve: R is the radius, L the length of the easing into it, h how much higher the outer rail is, in millimetres. A slight turn with no real curve reads 2xL"}},
|
|
{{first_step::bend, "Lay a track that turns and read the label of its curve"}},
|
|
trial::lay,
|
|
tutorial_corner_sketch},
|
|
{"Correcting a curve",
|
|
"plan",
|
|
{{"G", "Turns Plan on. Click a curve to see how it is built; its corner point and its size can be dragged in the view"},
|
|
{"LMB + move", "The strip in the panel shows how much the track turns along the way. Drag a flat part of it up or down to change how sharp that curve is"},
|
|
{"LMB + move", "Drag a sloping part sideways: the easing into the curve gets longer or shorter"},
|
|
{"wheel", "Over the strip, the wheel changes it in small steps"},
|
|
{"LMB", "Apply to the scenery: the tracks are laid again as the plan shows"}},
|
|
{{first_step::plan, "Open the plan of a curve"}, {first_step::plan_band, "Change the curve on the strip"}, {first_step::plan_apply, "Apply the change"}},
|
|
trial::plan},
|
|
{"Joining tracks",
|
|
"join",
|
|
{{"LMB + move", "Press on the loose end of a track (a pink ring while laying) and drag: a new track comes out of it"},
|
|
{"LMB", "Let go on another loose end: a curve joins the two tracks"},
|
|
{"LMB", "While laying, a click on a loose end joins your track to it exactly, with no gap"},
|
|
{"Ctrl + wheel", "Over the other end: makes the joining curve bigger or smaller"},
|
|
{"Shift + wheel", "Over the other end: tries another way of joining"}},
|
|
{{first_step::join, "Join two loose ends"}, {first_step::wheel, "Change the size of the joining curve with Ctrl+wheel"}},
|
|
trial::lay},
|
|
{"Switches",
|
|
"switch",
|
|
{{"T", "Turns Switch on. The tiles at the top choose what you put in: a switch, a slip switch or a crossing"},
|
|
{"LMB", "Click the track the switch should go into"},
|
|
{"LMB + move", "Press on it and drag: along the track sets which way the switch points, sideways which side it branches off to; let go to lay it"},
|
|
{"LMB + move", "Drag from a straight track onto the track beside it: two switches joining them (a crossover). Over a crossover going the other way you get a double or a scissors one"},
|
|
{"LMB + move", "Drag from a straight across several tracks running alongside and let go on the farthest: a row of switches leading onto each of them (a switch ladder)"},
|
|
{"Esc", "Back to selecting"}},
|
|
{{first_step::turnout, "Put a switch into a track"}},
|
|
trial::turnout},
|
|
{"Switch templates",
|
|
nullptr,
|
|
{{"T", "In Switch, the Template editor... button: ready switch shapes and your own. Point at a number to see on the drawing what it means"},
|
|
{"LMB", "To copy a switch from the aerial photo: Click off the view..., then click where the switch starts, the end of its straight track, the end of its branching track and one point further along that branch"},
|
|
{"LMB", "Then at least 3 points along the branching track: its shape and size follow them"},
|
|
{"Backspace", "Removes the last point; Esc stops clicking"},
|
|
{"O", "The view from above; the aerial photo is turned on in the Layers panel"},
|
|
{"LMB", "Make the template: the new switch lies on the photo where it was clicked and changes as its numbers change"}},
|
|
{{first_step::template_open, "Open the template editor"}, {first_step::template_clicked, "Make a template by clicking in the view"}},
|
|
trial::turnout,
|
|
tutorial_template_sketch},
|
|
{"Signals and posts",
|
|
nullptr,
|
|
{{"I", "Turns Signals on. Click a kind of signal in its list; it shows the signals this scenery has"},
|
|
{"LMB", "Click beside a track: the signal stands on that side"},
|
|
{"LMB + move", "Press beside the track and drag along it: the signal faces the trains going the way you dragged"},
|
|
{"LMB + move", "Drag a signal that already stands: it slides along its track"},
|
|
{"X", "Turns Kilometrage on. Click a track where you know the km, by a post or a station: the posts every 100 m and the block signals are numbered after it"},
|
|
{"B", "Things beside the track: posts every 100 m along a whole line at once, the W17 signs by the switches (how far a wagon may stand) and trains. The posts take their numbers from the km set with X, or from the km you type in their panel for the place you clicked"}},
|
|
{{first_step::signal, "Put up a signal"}, {first_step::posts, "Put up the posts along a line"}},
|
|
trial::signals,
|
|
tutorial_signal_sketch},
|
|
{"A whole line, step by step",
|
|
nullptr,
|
|
{{"1", "Lay the tracks of the line (L), and the switches (T) where the stations are"},
|
|
{"2", "Kilometrage (X): click a track where you know the km, by a post or at a station. One point is enough: the posts, the stations and the block signals count from it"},
|
|
{"3", "Station (under More): click a switch of the station, then give its name, its code and the number of the line"},
|
|
{"4", "Station signals (under More): Set the signals puts up the entry, exit and shunting signals of the whole station at once"},
|
|
{"5", "Line block (under More): the block signals on the line out of each station, once the stations are set"},
|
|
{"6", "Posts (B): click the line, then Place the posts, every 100 m along all of it"},
|
|
{"7", "Save with Ctrl+S, put a train on the track and drive: the last lesson"}},
|
|
{},
|
|
trial::station},
|
|
{"Selecting and fixing",
|
|
"edit",
|
|
{{"Esc", "Turns selecting on"},
|
|
{"LMB", "Click a track to select it; its ends show"},
|
|
{"LMB + move", "Drag an end: where tracks meet, the ones beside follow; a loose end pulls out a new track, or with Ctrl moves by itself"},
|
|
{"RMB", "Click a track: a menu of what can be done with it"},
|
|
{"Del", "Deletes what is selected"},
|
|
{"Ctrl + Z", "Undoes the last change; Ctrl+Y brings it back"},
|
|
{"Q W E", "Handles on the track to move, turn, lengthen or bend it: the next lesson"}},
|
|
{{first_step::select, "Select a track"}, {first_step::undo, "Undo a change"}},
|
|
trial::select},
|
|
{"Editing with the gizmo",
|
|
"gizmo",
|
|
{{"Q", "Shows arrows on the selected track: drag one to move the track"},
|
|
{"W", "Shows rings: drag one to turn the track, to tilt it up or down, or to raise one rail; the tracks joined to it follow"},
|
|
{"E", "Shows handles that make the track longer at its loose end; a curve stays as sharp as it was"},
|
|
{"LMB + move", "With the handles out there are also points that bend the track: drag one and the track bends after it"},
|
|
{"LMB", "Click a point of the track to put the handles there: Q then moves that point only, W turns the whole track around it"},
|
|
{"Ctrl", "Hold it while dragging to move in even steps"},
|
|
{"Esc", "Lets go of the point; the arrow button above the view hides the handles again"}},
|
|
{{first_step::gizmo, "Show the handles with Q, W or E"}, {first_step::vector, "Bend a track by one of its points, or move it with the handles"}},
|
|
trial::select},
|
|
{"The grade line",
|
|
nullptr,
|
|
{{"P", "Turns Profile on. Click a track: below the view you see how its whole line goes up and down"},
|
|
{"Shift + LMB", "A click adds another track; a box drawn from empty ground takes the tracks inside it. The route runs between the outermost of them, through the switches"},
|
|
{"LMB + move", "Drag a point of the line: the slopes on both sides of it change with it"},
|
|
{"LMB LMB", "Double-click the line to add a point"},
|
|
{"Del", "Removes the chosen point"},
|
|
{"LMB", "Tracks running side by side share one line: change it, press Apply to the scenery, and the tracks beside it (blue) change too"},
|
|
{"LMB", "To give the route open in Profile a line of its own, press Take off the common grade line"},
|
|
{"Ctrl + wheel", "Over the chart: stretches it up and down, so the slopes are easier to see"},
|
|
{"RMB + move", "Over the chart: moves along the line"}},
|
|
{{first_step::profile, "Open the profile of a track"}, {first_step::profile_point, "Move or add a point"}, {first_step::profile_apply, "Apply it: the tracks take the new heights"}},
|
|
trial::profile,
|
|
tutorial_route_sketch},
|
|
{"Terrain from the terrain model",
|
|
nullptr,
|
|
{{"L", "In a new, empty scenery the first L asks whether you want the real ground of the place or a flat plane"},
|
|
{"F5", "Opens Terrain; the real ground (the terrain model) is in its panel"},
|
|
{"LMB", "Step 1, Location: show where the scenery is, with a click on the map or by typing the place"},
|
|
{"LMB", "Step 2, before there are tracks: Load around the camera brings the ground of that spot from geoportal.gov.pl"},
|
|
{"LMB", "Step 2, once there are tracks: Tracks onto the terrain puts the tracks not fitted yet onto the real ground; Terrain under the tracks brings the ground up or down to them; The terrain of the model only loads the ground along them and leaves the tracks alone"},
|
|
{"F3", "The terrain to some of the tracks only: select them (F3), Terrain in the inspector"},
|
|
{"LMB", "A new track partly under the ground: the message above the view has Fit the ground to the track; one click builds the bank or the cutting along it"},
|
|
{"", "A line you shaped by hand in Profile stays as it is, even when all the tracks are fitted anew, unless you tick that the ones edited by hand go too"},
|
|
{"", "Tracks close side by side (under 5.1 m apart) get one common line of heights; a track crossing others where the ground is low on both sides goes under them"},
|
|
{"Ctrl + Z", "Takes the changes back"}},
|
|
{{first_step::terrain, "Open Terrain (F5)"}, {first_step::nmt, "Load the real ground"}},
|
|
trial::terrain,
|
|
tutorial_terrain_sketch},
|
|
{"Sceneries made before",
|
|
nullptr,
|
|
{{"LMB", "Some tracks can't be changed, for example ones put in from a ready .inc file or lying on a locked layer: the Inspector says why"},
|
|
{"T", "Switches laid earlier keep their shape; a template picked for one in the Inspector gives it the ready shape"},
|
|
{"P", "Heights saved by an older editor are read as they were saved"},
|
|
{"Ctrl + S", "Saving writes only what was changed; the rest of the files stays as it was"}},
|
|
{},
|
|
trial::reading},
|
|
{"Saving and driving",
|
|
nullptr,
|
|
{{"Ctrl + S", "Saves the scenery"},
|
|
{"LMB", "The trainset tool (the button below): click the track where the train should stand"},
|
|
{"LMB LMB", "Double-click a vehicle in the list to add it to the train; click a vehicle in the train to move it, turn it round or take it out"},
|
|
{"LMB", "Place and drive: the train stands on the track and you sit in the cab"}},
|
|
{{first_step::save, "Save the scenery"}, {first_step::drive, "Drive on the new track"}},
|
|
trial::trainset,
|
|
tutorial_trainset_sketch},
|
|
};
|
|
return lessons;
|
|
}
|
|
|
|
bool editor_mode::tutorial_done(tutorial_lesson const &Lesson) const
|
|
{
|
|
return false == Lesson.goals.empty() && std::ranges::all_of(Lesson.goals, [this](tutorial_lesson::goal const &Goal) { return m_first_steps_done[static_cast<std::size_t>(Goal.step)]; });
|
|
}
|
|
|
|
void editor_mode::note_first_steps()
|
|
{
|
|
if (ui()->mode() == nodebank_panel::TRACK)
|
|
first_step_done(first_step::tracks);
|
|
if (m_lay.active)
|
|
first_step_done(first_step::lay);
|
|
if (ui()->mode() == nodebank_panel::TRACK && m_track_tab == track_tab::path && selected_track() != nullptr)
|
|
first_step_done(first_step::select);
|
|
if (current_work_area() == work_area::terrain)
|
|
first_step_done(first_step::terrain);
|
|
if (ui()->mode() == nodebank_panel::TRACK && m_track_tab == track_tab::route && false == m_route.chain.tracks.empty())
|
|
first_step_done(first_step::plan);
|
|
if (ui()->mode() == nodebank_panel::TRACK && m_track_gizmo_on)
|
|
first_step_done(first_step::gizmo);
|
|
if (m_track_gizmo_using || (m_point_drag.moved && m_track_point.valid() && false == editor_track::is_end(m_track_point.kind)))
|
|
first_step_done(first_step::vector);
|
|
if (m_ride.active())
|
|
first_step_done(first_step::ride);
|
|
}
|
|
|
|
char const *editor_mode::tutorial_of_tool()
|
|
{
|
|
auto const &lessons{tutorial_lessons()};
|
|
// the first of the lessons named whose steps aren't all reached yet
|
|
auto const undone = [&](std::initializer_list<char const *> const Titles) {
|
|
for (auto const *title : Titles)
|
|
if (auto const found{std::ranges::find_if(lessons, [title](tutorial_lesson const &Lesson) { return std::string_view{title} == Lesson.title; })};
|
|
found != lessons.end() && false == tutorial_done(*found))
|
|
return title;
|
|
return "";
|
|
};
|
|
if (m_lay.active)
|
|
return undone({"Laying track", "Radius of the curves at the bends", "Curves", "Joining tracks"});
|
|
if (current_work_area() == work_area::terrain)
|
|
return undone({"Terrain from the terrain model"});
|
|
if (ui()->mode() != nodebank_panel::TRACK)
|
|
return "";
|
|
switch (m_track_tab)
|
|
{
|
|
case track_tab::turnout:
|
|
return undone({m_switch_designer.open ? "Switch templates" : "Switches"});
|
|
case track_tab::profile:
|
|
return undone({"The grade line"});
|
|
case track_tab::route:
|
|
case track_tab::straights:
|
|
return undone({"Correcting a curve"});
|
|
case track_tab::signals:
|
|
case track_tab::kilometrage:
|
|
return undone({"Signals and posts"});
|
|
case track_tab::station:
|
|
case track_tab::station_signals:
|
|
case track_tab::line_block:
|
|
return undone({"A whole line, step by step"});
|
|
default:
|
|
return "";
|
|
}
|
|
}
|
|
|
|
void editor_mode::follow_tutorial()
|
|
{
|
|
auto const &lessons{tutorial_lessons()};
|
|
auto const open_lesson = [&](std::string_view const Title) {
|
|
if (auto const found{std::ranges::find_if(lessons, [Title](tutorial_lesson const &Lesson) { return Title == Lesson.title; })}; found != lessons.end())
|
|
m_tutorial_page = static_cast<int>(found - lessons.begin());
|
|
};
|
|
// the lesson of what's being done now, the next one once its steps are reached; opened when that changes, so a page turned by
|
|
// hand stays
|
|
if (auto const *followed{tutorial_of_tool()}; m_tutorial_followed != followed)
|
|
{
|
|
m_tutorial_followed = followed;
|
|
open_lesson(followed);
|
|
}
|
|
if (m_tutorial_goto != nullptr)
|
|
{
|
|
open_lesson(m_tutorial_goto);
|
|
m_tutorial_goto = nullptr;
|
|
}
|
|
m_tutorial_page = std::clamp(m_tutorial_page, 0, static_cast<int>(lessons.size()) - 1);
|
|
auto const &lesson{lessons[m_tutorial_page]};
|
|
if (lesson.clip == nullptr)
|
|
m_tutorial_clip.close();
|
|
else if (auto const path{std::string{"lang/editor_tutorial/"} + lesson.clip + ".gif"}; path != m_tutorial_clip.path())
|
|
{
|
|
m_tutorial_clip.open(path);
|
|
m_tutorial_since = ImGui::GetTime();
|
|
}
|
|
}
|
|
|
|
void editor_mode::render_first_steps()
|
|
{
|
|
if (false == m_first_steps_open)
|
|
{
|
|
if (false == m_tutorial_clip.path().empty())
|
|
m_tutorial_clip.close();
|
|
return;
|
|
}
|
|
note_first_steps();
|
|
follow_tutorial();
|
|
auto const &lessons{tutorial_lessons()};
|
|
auto const &lesson{lessons[m_tutorial_page]};
|
|
auto const scale{Global.ui_scale};
|
|
ImGui::SetNextWindowPos(ImVec2(ImGui::GetIO().DisplaySize.x * 0.5f, ImGui::GetIO().DisplaySize.y * 0.5f), ImGuiCond_FirstUseEver, ImVec2(0.5f, 0.5f));
|
|
ImGui::SetNextWindowBgAlpha(1.0f);
|
|
ImGui::SetNextWindowSizeConstraints(ImVec2(0.0f, 0.0f), ImVec2(FLT_MAX, ImGui::GetIO().DisplaySize.y - 60.0f));
|
|
keep_on_screen("###tutorial");
|
|
if (ImGui::Begin((std::string(STR_C("Tutorial")) + "###tutorial").c_str(), &m_first_steps_open, ImGuiWindowFlags_NoCollapse | ImGuiWindowFlags_AlwaysAutoResize))
|
|
{
|
|
// floating it's as wide as the clips; docked it takes the width of its dock, the texts wrapped to it
|
|
auto const width{ImGui::IsWindowDocked() ? std::max(160.0f * scale, ImGui::GetContentRegionAvail().x) : 520.0f * scale};
|
|
ImGui::PushTextWrapPos(ImGui::GetCursorPosX() + width);
|
|
ImGui::TextDisabled(STR_C("Lesson %d of %d"), m_tutorial_page + 1, static_cast<int>(lessons.size()));
|
|
ImGui::SameLine();
|
|
ImGui::TextColored(ImVec4(0.55f, 0.8f, 1.0f, 1.0f), "%s", STR_C(lesson.title));
|
|
render_tutorial_media(lesson, width);
|
|
render_tutorial_goals(lesson);
|
|
render_tutorial_trial(lesson);
|
|
ImGui::PopTextWrapPos();
|
|
ImGui::Separator();
|
|
render_tutorial_pages();
|
|
}
|
|
ImGui::End();
|
|
}
|
|
|
|
void editor_mode::render_tutorial_media(tutorial_lesson const &Lesson, float const Width)
|
|
{
|
|
if (Lesson.clip != nullptr && false == m_tutorial_clip.missing())
|
|
{
|
|
// the room of a clip still loading, as the clips are recorded: 520 x 325
|
|
auto const height{Width * 325.0f / 520.0f};
|
|
if (auto const texture{m_tutorial_clip.texture(ImGui::GetTime() - m_tutorial_since)}; texture != 0)
|
|
{
|
|
auto const shown{Width * static_cast<float>(m_tutorial_clip.height()) / static_cast<float>(std::max(1, m_tutorial_clip.width()))};
|
|
ImGui::Image(static_cast<ImTextureID>(texture), ImVec2(Width, shown));
|
|
if (ImGui::IsItemClicked())
|
|
m_tutorial_since = ImGui::GetTime();
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("Click: play it from the start"));
|
|
}
|
|
else
|
|
{
|
|
auto const at{ImGui::GetCursorScreenPos()};
|
|
ImGui::GetWindowDrawList()->AddRectFilled(at, ImVec2(at.x + Width, at.y + height), ImGui::GetColorU32(ImGuiCol_FrameBg));
|
|
ImGui::Dummy(ImVec2(Width, height));
|
|
}
|
|
}
|
|
if (Lesson.sketch != nullptr)
|
|
{
|
|
auto const at{ImGui::GetCursorScreenPos()};
|
|
ImVec2 const end{at.x + Width, at.y + std::round(Width * 0.36f)};
|
|
auto *list{ImGui::GetWindowDrawList()};
|
|
list->AddRectFilled(at, end, ImGui::GetColorU32(ImGuiCol_FrameBg), 4.0f);
|
|
list->PushClipRect(at, end, true);
|
|
Lesson.sketch(*list, at, end, ImGui::GetTime());
|
|
list->PopClipRect();
|
|
ImGui::Dummy(ImVec2(Width, end.y - at.y));
|
|
}
|
|
}
|
|
|
|
void editor_mode::render_tutorial_goals(tutorial_lesson const &Lesson)
|
|
{
|
|
ImGui::SeparatorText(STR_C("Mouse and keys"));
|
|
for (auto const &entry : Lesson.inputs)
|
|
tutorial_input(entry.keys, entry.text, 150.0f * Global.ui_scale);
|
|
if (false == Lesson.goals.empty())
|
|
ImGui::SeparatorText(STR_C("Try it"));
|
|
for (auto const &entry : Lesson.goals)
|
|
{
|
|
bool const reached{m_first_steps_done[static_cast<std::size_t>(entry.step)]};
|
|
ImGui::TextColored(reached ? ImVec4(0.4f, 0.9f, 0.4f, 1.0f) : ImGui::GetStyleColorVec4(ImGuiCol_Text), "%s", reached ? "[x]" : "[ ]");
|
|
ImGui::SameLine();
|
|
if (reached)
|
|
ImGui::TextDisabled("%s", STR_C(entry.text));
|
|
else
|
|
ImGui::TextWrapped("%s", STR_C(entry.text));
|
|
}
|
|
if (Lesson.action == tutorial_lesson::trial::lay && ui()->mode() == nodebank_panel::TRACK && false == GfxRenderer->Mouse_Hit())
|
|
ImGui::TextColored(ImVec4(1.0f, 0.7f, 0.2f, 1.0f), "%s", STR_C("There is no ground under the mouse: the track will lie flat at height 0. Real ground: F5"));
|
|
}
|
|
|
|
void editor_mode::render_tutorial_trial(tutorial_lesson const &Lesson)
|
|
{
|
|
using trial = tutorial_lesson::trial;
|
|
if (Lesson.action == trial::top)
|
|
{
|
|
if (ImGui::Button(Global.EditorOrtho ? STR_C("3D view (O)") : STR_C("Top view, orthographic (O)")))
|
|
toggle_ortho();
|
|
return;
|
|
}
|
|
if (Lesson.action == trial::terrain)
|
|
{
|
|
ImGui::BeginDisabled(current_work_area() == work_area::terrain);
|
|
if (ImGui::Button(STR_C("Terrain (F5)")))
|
|
choose_work_area(work_area::terrain);
|
|
ImGui::EndDisabled();
|
|
return;
|
|
}
|
|
// a tool of Tracks: the tab its button opens, and the one beside it which counts as that tool open as well
|
|
struct tool_button
|
|
{
|
|
char const *label;
|
|
track_tab tab;
|
|
track_tab also;
|
|
};
|
|
tool_button button{};
|
|
switch (Lesson.action)
|
|
{
|
|
case trial::lay:
|
|
button = {STR_C("Lay track (L)"), track_tab::lay, track_tab::lay};
|
|
break;
|
|
case trial::turnout:
|
|
button = {STR_C("The switch tool (T)"), track_tab::turnout, track_tab::turnout};
|
|
break;
|
|
case trial::select:
|
|
button = {STR_C("The select tool (Esc)"), track_tab::path, track_tab::path};
|
|
break;
|
|
case trial::profile:
|
|
button = {STR_C("The profile tool (P)"), track_tab::profile, track_tab::profile};
|
|
break;
|
|
case trial::signals:
|
|
button = {STR_C("The signals tool (I)"), track_tab::signals, track_tab::signals};
|
|
break;
|
|
case trial::station:
|
|
button = {STR_C("The station tool"), track_tab::station, track_tab::station_signals};
|
|
break;
|
|
case trial::plan:
|
|
button = {STR_C("The plan tool (G)"), track_tab::straights, track_tab::route};
|
|
break;
|
|
case trial::trainset:
|
|
button = {STR_C("The trainset tool"), track_tab::lineside, track_tab::lineside};
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
// the trainset tool is open only with its part of the tab expanded
|
|
auto const in_use{ui()->mode() == nodebank_panel::TRACK && (m_track_tab == button.tab || m_track_tab == button.also) && (Lesson.action != trial::trainset || m_vehicle.tab().open)};
|
|
ImGui::BeginDisabled(in_use);
|
|
if (ImGui::Button(button.label))
|
|
{
|
|
choose_work_area(work_area::tracks);
|
|
show_track_tab(button.tab);
|
|
if (Lesson.action == trial::trainset)
|
|
m_vehicle.tab().expand = true;
|
|
}
|
|
ImGui::EndDisabled();
|
|
}
|
|
|
|
void editor_mode::render_tutorial_pages()
|
|
{
|
|
auto const &lessons{tutorial_lessons()};
|
|
auto const count{static_cast<int>(lessons.size())};
|
|
ImGui::BeginDisabled(m_tutorial_page == 0);
|
|
if (ImGui::Button(STR_C("< Back")))
|
|
--m_tutorial_page;
|
|
ImGui::EndDisabled();
|
|
ImGui::SameLine();
|
|
auto const dot{ImGui::GetFrameHeight()};
|
|
for (int index = 0; index < count; ++index)
|
|
{
|
|
ImGui::PushID(index);
|
|
auto const at{ImGui::GetCursorScreenPos()};
|
|
if (ImGui::InvisibleButton("##lesson", ImVec2(dot * 0.8f, dot)))
|
|
m_tutorial_page = index;
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C(lessons[index].title));
|
|
ImVec2 const centre{at.x + dot * 0.4f, at.y + dot * 0.5f};
|
|
auto const colour{tutorial_done(lessons[index]) ? IM_COL32(100, 230, 100, 255) : ImGui::GetColorU32(ImGuiCol_TextDisabled)};
|
|
if (index == m_tutorial_page)
|
|
ImGui::GetWindowDrawList()->AddCircle(centre, dot * 0.3f, kGestureLit, 0, 2.0f);
|
|
ImGui::GetWindowDrawList()->AddCircleFilled(centre, dot * 0.17f, colour);
|
|
ImGui::PopID();
|
|
ImGui::SameLine(0.0f, 0.0f);
|
|
}
|
|
ImGui::SameLine();
|
|
if (m_tutorial_page + 1 < count)
|
|
{
|
|
if (ImGui::Button(STR_C("Next >")))
|
|
++m_tutorial_page;
|
|
}
|
|
else if (ImGui::Button(STR_C("Close")))
|
|
m_first_steps_open = false;
|
|
bool show{EditorSettings.first_steps()};
|
|
if (ImGui::Checkbox(STR_C("Show when the editor opens"), &show))
|
|
{
|
|
EditorSettings.first_steps(show);
|
|
EditorSettings.save();
|
|
}
|
|
}
|
|
|
|
void editor_mode::render_shortcuts_window()
|
|
{
|
|
if (false == m_shortcuts_open)
|
|
return;
|
|
struct shortcut
|
|
{
|
|
char const *keys;
|
|
char const *action;
|
|
};
|
|
struct group
|
|
{
|
|
char const *title;
|
|
std::vector<shortcut> shortcuts;
|
|
};
|
|
static std::vector<group> const groups{
|
|
{"General",
|
|
{{"F1", "This list of shortcuts"},
|
|
{"Ctrl+S", "Save the scenery"},
|
|
{"Ctrl+Z / Ctrl+Y", "Undo / redo"},
|
|
{"Ctrl+Space", "Unpin all docks for the most of the view, or pin them back"},
|
|
{"F9", "Log"},
|
|
{"PrtScr", "Screenshot"},
|
|
{"Ctrl+Shift+F11", "Export scenery dump"},
|
|
{"F11", "Leave the editor"},
|
|
{"F10", "Quit the simulator"}}},
|
|
{"Fields of work", {{"F2", "Surroundings"}, {"F3", "Tracks"}, {"F4", "Roads"}, {"F5", "Terrain"}}},
|
|
{"Camera",
|
|
{{"RMB held, mouse", "Look around"},
|
|
{"RMB held, W S A D", "Fly forwards, back, left, right (arrows in the legacy scheme)"},
|
|
{"RMB held, E / Q", "Fly up / down (Page Up / Page Down in the legacy scheme)"},
|
|
{"F", "Fly to the selected"},
|
|
{"O", "Top view, orthographic"}}},
|
|
{"Ride along the track",
|
|
{{"Y", "Ride along the track under the cursor, the tools working on; Y again leaves"},
|
|
{"RMB held, W / S", "Drive; Shift faster, Ctrl+W / Ctrl+Down much faster"},
|
|
{"RMB held, A / D", "Next track on the left / right"},
|
|
{"Z", "The way at the next switch (it isn't thrown)"},
|
|
{"RMB held, E / Q; wheel", "Higher / lower"},
|
|
{"Ctrl+M", "Minimap, stations by their W4"}}},
|
|
{"Gizmo",
|
|
{{"Q / W / E", "Translate / rotate / scale; in the tracks they bring the hidden gizmo out"},
|
|
{"R", "Local space"},
|
|
{"Ctrl held while dragging", "Snap to the step set in the gizmo settings"},
|
|
{"Tool options, Gizmo, Off", "Hides the gizmo, so nothing moves by chance; in the tracks it is hidden until Q, W or E"}}},
|
|
{"Surroundings",
|
|
{{"1 2 3 4 5", "Select, insert, brush, area fill, copy to bank"},
|
|
{"LMB", "Select a model, or place one in the insert and brush modes"},
|
|
{"Shift+LMB", "Add a model to the selection, or take it out"},
|
|
{"Ctrl+RMB", "Menu of the selection at the cursor"},
|
|
{"Ctrl+C / Ctrl+V", "Copy the selected models / paste them at the cursor"},
|
|
{"Ctrl+G / Ctrl+Shift+G", "Group the selected models / take their group apart"},
|
|
{"End", "Drop the selected onto the ground, each model of a group by itself"},
|
|
{"Del", "Delete the selected"},
|
|
{"B", "Bend the selected along the track"},
|
|
{"Backspace", "Area fill: take the last point of the outline back"}}},
|
|
{"Tracks",
|
|
{{"Esc", "Select tool; cancels what's going on first"},
|
|
{"L / T / U", "Lay track / switch / turntable"},
|
|
{"H", "Throw the selected switch over to its other path, in the editor only"},
|
|
{"G (C)", "Plan: a straight, its ends and the middle; a curve, its vertex and radius"},
|
|
{"I / X / B", "Signals / kilometrage / posts along the track"},
|
|
{"P / V / J", "Profile / speed / joints"},
|
|
{"Ctrl+F", "Find a track by its name"},
|
|
{"Shift+LMB", "Add a track to the selection, drag: a box"},
|
|
{"RMB on a track", "What can be done with it"},
|
|
{"K", "Split the selected track at the cursor, a break of the grade at the height of the ground"},
|
|
{"L, LMB, LMB...", "Lay track: each click a bend of the straights, eased with a large curve; Enter lays them; a click on a free end goes on from it"},
|
|
{"Tab while laying", "The points clicked next go along the middle of a curve seen on the photo, which ends at the last one; Tab again: back to the bends"},
|
|
{"Drag from a free end", "Lead a track out of it: a straight, an arc and a straight where a curve is traced (Tab); onto another free end: join the two"},
|
|
{"Ctrl+wheel", "Dragging from a free end: radius"},
|
|
{"Shift+wheel", "Dragging over another free end: another way to join"},
|
|
{"0-9 while laying", "Type the length of the next straight, Enter puts the point"},
|
|
{"Alt held while laying", "The direction in steps of 15 degrees, or 1:9, 1:6.6... to a straight track; the first click with Alt goes onto the axis of the track"},
|
|
{"N", "Parallel track: LMB on a track, then the side and the spacing"},
|
|
{"Shift+LMB on a track in L", "The Parallel tool (N) with it"},
|
|
{"Enter / Backspace", "Laying track: lay the points clicked / take back the last point"},
|
|
{"Esc twice while laying", "Drop the points clicked and not laid yet"},
|
|
{"Del", "Delete the selected tracks"}}},
|
|
{"Plan of a curve",
|
|
{{"G, LMB on a curve", "Its design: the vertex and the radius to drag in the view, the curvature in the panel"},
|
|
{"Drag a plateau of the curvature band", "The radius of that arc"},
|
|
{"Drag a ramp sideways", "The length of the transition curve"},
|
|
{"Wheel over the band", "The radius by 5%, a transition by 5 m"},
|
|
{"Apply to the scenery", "Lay the paths by the design; Ctrl+Z takes it back"}}},
|
|
{"Trainset",
|
|
{{"B, Trainset, LMB on a track", "Where the train stands"},
|
|
{"LMB LMB on the list", "Adds the vehicle to the train"},
|
|
{"LMB on a vehicle of the train", "Moves it, turns it around or takes it out"},
|
|
{"Place and drive", "Puts the train on the track and gives the cab at once"}}},
|
|
{"Vertical profile",
|
|
{{"P, LMB on a track", "The grade line of its whole line, in the strip under the view"},
|
|
{"Shift+LMB box", "The route between the outermost of the tracks, through the switches"},
|
|
{"LMB + move on a point", "Change the grade before and after it"},
|
|
{"LMB LMB on the line", "Add a point"},
|
|
{"Del", "Remove the chosen point"},
|
|
{"Wheel", "Zoom along the line"},
|
|
{"Ctrl+wheel", "Stretch the heights"},
|
|
{"RMB + move", "Move the view along the line"},
|
|
{"Apply in the scenery", "Write the heights into the tracks; Ctrl+Z takes them back"}}},
|
|
{"Roads",
|
|
{{"Esc", "Finish the road being built"},
|
|
{"Ctrl held", "Build: straight ahead"},
|
|
{"Shift+LMB", "Select: add a point, or take it out"},
|
|
{"K", "Split the road at the cursor, or make a point there"},
|
|
{"Del", "Delete the selected"}}},
|
|
{"Terrain", {{"LMB", "Sculpt: raise; smooth: even out; chunks: add one"}, {"Shift+LMB", "Sculpt: lower; chunks: delete one"}}},
|
|
};
|
|
ImGui::SetNextWindowSize(ImVec2(620.0f * Global.ui_scale, 560.0f * Global.ui_scale), ImGuiCond_FirstUseEver);
|
|
keep_on_screen("###shortcuts");
|
|
// it floats over the view, read better on a solid background
|
|
ImGui::SetNextWindowBgAlpha(0.97f);
|
|
if (ImGui::Begin((std::string(STR_C("Keyboard shortcuts")) + "###shortcuts").c_str(), &m_shortcuts_open, ImGuiWindowFlags_NoCollapse))
|
|
{
|
|
static char filter[64]{};
|
|
ImGui::SetNextItemWidth(ImGui::GetContentRegionAvail().x * 0.6f);
|
|
ImGui::InputTextWithHint("##shortcutfilter", STR_C("Find: a key or what it does"), filter, sizeof(filter));
|
|
ImGui::SameLine();
|
|
if (ImGui::Button(STR_C("Tutorial")))
|
|
m_first_steps_open = true;
|
|
auto const lower = [](std::string Text) {
|
|
std::transform(Text.begin(), Text.end(), Text.begin(), [](unsigned char const Character) { return static_cast<char>(std::tolower(Character)); });
|
|
return Text;
|
|
};
|
|
auto const wanted{lower(filter)};
|
|
auto const matches = [&](shortcut const &Item) { return wanted.empty() || lower(STR_C(Item.keys)).find(wanted) != std::string::npos || lower(STR_C(Item.action)).find(wanted) != std::string::npos; };
|
|
auto const picture{std::round(ImGui::GetTextLineHeight() * 1.15f)};
|
|
for (auto const &entry : groups)
|
|
{
|
|
if (std::none_of(entry.shortcuts.begin(), entry.shortcuts.end(), matches))
|
|
continue;
|
|
ImGui::SeparatorText(STR_C(entry.title));
|
|
if (false == ImGui::BeginTable(entry.title, 2, ImGuiTableFlags_RowBg | ImGuiTableFlags_SizingStretchProp))
|
|
continue;
|
|
ImGui::TableSetupColumn("##keys", ImGuiTableColumnFlags_WidthFixed, 250.0f * Global.ui_scale);
|
|
ImGui::TableSetupColumn("##action", ImGuiTableColumnFlags_WidthStretch, 1.0f);
|
|
for (auto const &item : entry.shortcuts)
|
|
{
|
|
if (false == matches(item))
|
|
continue;
|
|
ImGui::TableNextColumn();
|
|
auto const words{gesture_picture(item.keys)};
|
|
if (false == words.empty())
|
|
{
|
|
auto const at{ImGui::GetCursorScreenPos()};
|
|
auto const drawn{gesture_draw(*ImGui::GetWindowDrawList(), at, picture, words, ImGui::GetColorU32(ImGuiCol_Text))};
|
|
ImGui::Dummy(ImVec2(drawn, picture));
|
|
ImGui::SameLine();
|
|
ImGui::SetCursorPosY(ImGui::GetCursorPosY() + std::round((picture - ImGui::GetTextLineHeight()) * 0.5f));
|
|
}
|
|
if (words.empty() || false == gesture_keys_only(item.keys))
|
|
ImGui::TextColored(ImGui::GetStyleColorVec4(ImGuiCol_CheckMark), "%s", STR_C(item.keys));
|
|
else
|
|
ImGui::NewLine();
|
|
ImGui::TableNextColumn();
|
|
if (false == words.empty())
|
|
ImGui::SetCursorPosY(ImGui::GetCursorPosY() + std::round((picture - ImGui::GetTextLineHeight()) * 0.5f));
|
|
ImGui::TextWrapped("%s", STR_C(item.action));
|
|
}
|
|
ImGui::EndTable();
|
|
}
|
|
}
|
|
ImGui::End();
|
|
}
|
|
|
|
bool editor_mode::gizmo_shown() const
|
|
{
|
|
return ui()->mode() == nodebank_panel::TRACK ? m_track_gizmo_on : m_gizmo_enabled;
|
|
}
|
|
|
|
void editor_mode::render_gizmo_options()
|
|
{
|
|
if (ImGui::Button(Global.EditorOrtho ? STR_C("3D view (O)") : STR_C("Top view, orthographic (O)")))
|
|
toggle_ortho();
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", Global.EditorOrtho ? STR_C("Wheel zooms. Hold the wheel and drag to pan.") : STR_C("Top-down orthographic view"));
|
|
if (Global.EditorOrtho)
|
|
{
|
|
ImGui::SameLine();
|
|
ImGui::SetNextItemWidth(120.0f);
|
|
ImGui::SliderFloat(STR_C("Extent (m), wheel / MMB pan"), &Global.EditorOrthoExtent, 5.0f, 50000.0f, "%.0f", ImGuiSliderFlags_Logarithmic);
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("Wheel zooms. Hold the wheel and drag to pan."));
|
|
ImGui::SameLine();
|
|
render_top_tracks_choice(true);
|
|
}
|
|
if (ui()->mode() == nodebank_panel::TRACK && m_track_tab != track_tab::path && m_track_tab != track_tab::turnout && m_track_tab != track_tab::turntable && m_track_tab != track_tab::signals &&
|
|
m_track_tab != track_tab::lineside)
|
|
return;
|
|
auto &enabled{ui()->mode() == nodebank_panel::TRACK ? m_track_gizmo_on : m_gizmo_enabled};
|
|
int op{enabled ? static_cast<int>(m_gizmo_op) : -1};
|
|
if (segmented("gizmo", op,
|
|
{{-1, STR_C("Off"), "The gizmo hidden: the selected things won't move by chance"},
|
|
{static_cast<int>(gizmo_operation::translate), STR_C("Translate (Q)"), "Arrows which move the selected thing"},
|
|
{static_cast<int>(gizmo_operation::rotate), STR_C("Rotate (W)"), "Rings which turn the selected thing"},
|
|
{static_cast<int>(gizmo_operation::scale), STR_C("Scale (E)"), "Handles which scale the selected thing; a track is lengthened"}}))
|
|
{
|
|
enabled = op >= 0;
|
|
if (enabled)
|
|
m_gizmo_op = static_cast<gizmo_operation>(op);
|
|
}
|
|
if (!enabled)
|
|
return;
|
|
if (terrain_brush() || terrain_clicking())
|
|
{
|
|
ImGui::TextDisabled(STR_C("Suspended while editing terrain"));
|
|
return;
|
|
}
|
|
|
|
if (m_gizmo_op != gizmo_operation::scale) // ImGuizmo always scales in local space
|
|
ImGui::Checkbox(STR_C("Local space (R)"), &m_gizmo_local);
|
|
if (m_gizmo_op == gizmo_operation::translate)
|
|
{
|
|
ImGui::SetNextItemWidth(120.0f);
|
|
ImGui::InputFloat(STR_C("Snap (hold Ctrl)"), &m_gizmo_snap);
|
|
if (m_gizmo_snap < 0.0f)
|
|
m_gizmo_snap = 0.0f;
|
|
}
|
|
if (m_instance != 0)
|
|
{
|
|
auto const located = editor_includes::parameter_with_role(m_include.info, "pos.x") != 0 || editor_includes::parameter_with_role(m_include.info, "pos.y") != 0 ||
|
|
editor_includes::parameter_with_role(m_include.info, "pos.z") != 0;
|
|
ImGui::TextDisabled("%s", false == located ? STR_C("Include selected, no position parameters described") :
|
|
false == m_include.placement ? STR_C("Include selected, no gizmo under rotate or scale") :
|
|
STR_C("Include selected, axes as its template allows"));
|
|
}
|
|
else if (!m_node && ui()->mode() != nodebank_panel::TRACK)
|
|
ImGui::TextDisabled(STR_C("No node selected"));
|
|
}
|
|
|
|
void editor_mode::render_gizmo()
|
|
{
|
|
if (straights_active())
|
|
{
|
|
render_straight_gizmo();
|
|
return;
|
|
}
|
|
|
|
if (route_active())
|
|
{
|
|
render_route_gizmo();
|
|
return;
|
|
}
|
|
|
|
// the transform gizmo is suppressed while editing terrain, so the brush/chunk tool owns the mouse
|
|
if (!gizmo_shown() || terrain_brush() || terrain_clicking())
|
|
{
|
|
m_gizmo_using = false;
|
|
m_track_gizmo_using = false;
|
|
return;
|
|
}
|
|
|
|
if (ui()->mode() == nodebank_panel::TRACK && m_track_tab == track_tab::path && m_track_set.size() >= 2)
|
|
{
|
|
render_track_set_gizmo();
|
|
return;
|
|
}
|
|
|
|
if (!m_node && m_instance == 0)
|
|
{
|
|
m_gizmo_using = false;
|
|
return;
|
|
}
|
|
|
|
if (selected_track())
|
|
{
|
|
// in the track modes the whole path is moved only while selecting, or the switch in its mode
|
|
if (ui()->mode() != nodebank_panel::TRACK || (m_track_tab == track_tab::path && false == m_point_drag.active) || (m_track_tab == track_tab::turnout && selected_track()->eType == tt_Switch))
|
|
render_track_gizmo();
|
|
else
|
|
m_track_gizmo_using = false;
|
|
return;
|
|
}
|
|
|
|
ImGuizmo::BeginFrame();
|
|
ImGuizmo::SetOrthographic(Global.EditorOrtho);
|
|
|
|
ImGuiIO const &io = ImGui::GetIO();
|
|
ImGuizmo::SetRect(0.0f, 0.0f, io.DisplaySize.x, io.DisplaySize.y);
|
|
|
|
// the view matrix comes from the most recent color pass and is camera-relative
|
|
// (rotation only), so the gizmo is positioned relative to the camera as well.
|
|
glm::mat4 const view = GfxRenderer->Camera_View_Matrix();
|
|
glm::dvec3 const camerapos = GfxRenderer->Camera_Position();
|
|
|
|
// the engine's own projection bakes in reverse-Z (and screen orientation), which ImGuizmo
|
|
// doesn't expect; rebuild a clean, standard perspective that matches the rendered view.
|
|
// for the main viewport the engine uses a symmetric frustum with this exact fov/aspect.
|
|
float const aspect = io.DisplaySize.y > 0.0f ? io.DisplaySize.x / io.DisplaySize.y : 1.0f;
|
|
glm::mat4 const projection = editor_mode::projection_matrix(aspect);
|
|
|
|
if (!m_node)
|
|
{
|
|
render_include_gizmo(view, projection, camerapos);
|
|
return;
|
|
}
|
|
|
|
// rotation/scale are only meaningful for instanced models; other node types translate only
|
|
TAnimModel *model = dynamic_cast<TAnimModel *>(m_node);
|
|
|
|
glm::vec3 const relativepos = glm::vec3(m_node->location() - camerapos);
|
|
glm::vec3 const angles = model ? model->Angles() : glm::vec3(0.0f);
|
|
glm::vec3 const scalevec = model ? model->Scale() : glm::vec3(1.0f);
|
|
|
|
// build the gizmo model matrix from the node's current translation + rotation + scale
|
|
float const translation[3] = {relativepos.x, relativepos.y, relativepos.z};
|
|
float const rotation[3] = {angles.x, angles.y, angles.z};
|
|
float const scale[3] = {scalevec.x, scalevec.y, scalevec.z};
|
|
glm::mat4 matrix(1.0f);
|
|
ImGuizmo::RecomposeMatrixFromComponents(translation, rotation, scale, glm::value_ptr(matrix));
|
|
|
|
// map the editor's transform mode onto ImGuizmo; fall back to translate for non-models
|
|
ImGuizmo::OPERATION operation = ImGuizmo::TRANSLATE;
|
|
EditorSnapshot::Action action = EditorSnapshot::Action::Move;
|
|
if (model && m_gizmo_op == gizmo_operation::rotate)
|
|
{
|
|
operation = ImGuizmo::ROTATE;
|
|
action = EditorSnapshot::Action::Rotate;
|
|
}
|
|
else if (model && m_gizmo_op == gizmo_operation::scale)
|
|
{
|
|
operation = ImGuizmo::SCALE;
|
|
action = EditorSnapshot::Action::Scale;
|
|
}
|
|
ImGuizmo::MODE const mode = m_gizmo_local ? ImGuizmo::LOCAL : ImGuizmo::WORLD;
|
|
|
|
// optional snapping while Ctrl is held (metres / degrees / scale factor depending on mode)
|
|
glm::vec3 snapvalue(0.0f);
|
|
if (operation == ImGuizmo::TRANSLATE)
|
|
snapvalue = glm::vec3(m_gizmo_snap);
|
|
else if (operation == ImGuizmo::ROTATE)
|
|
snapvalue = glm::vec3(5.0f);
|
|
else
|
|
snapvalue = glm::vec3(0.1f);
|
|
float const *snap = Global.ctrlState && snapvalue.x > 0.0f ? glm::value_ptr(snapvalue) : nullptr;
|
|
|
|
// the change of this frame alone: a turn is taken from it, not from the angles the whole matrix decomposes into,
|
|
// which can't tell a turn of more than 90 degrees about the vertical axis (it comes out as 180 - angle with the
|
|
// other two axes flipped, and the model turned back and forth while dragged one way)
|
|
glm::mat4 delta(1.0f);
|
|
ImGuizmo::Manipulate(glm::value_ptr(view), glm::value_ptr(projection),
|
|
operation, mode, glm::value_ptr(matrix), glm::value_ptr(delta), snap);
|
|
|
|
if (ImGuizmo::IsUsing())
|
|
{
|
|
// record a single undo snapshot at the start of the drag
|
|
if (!m_gizmo_using)
|
|
{
|
|
// the models selected along with it and their groups go into the same step of the history
|
|
selection_snapshots(action);
|
|
m_gizmo_using = true;
|
|
}
|
|
|
|
float newtranslation[3], newrotation[3], newscale[3];
|
|
ImGuizmo::DecomposeMatrixToComponents(glm::value_ptr(matrix), newtranslation, newrotation, newscale);
|
|
|
|
if (operation == ImGuizmo::ROTATE && model)
|
|
{
|
|
// the turn of this frame, small, so its angles decompose with no ambiguity
|
|
float deltatranslation[3], deltarotation[3], deltascale[3];
|
|
ImGuizmo::DecomposeMatrixToComponents(glm::value_ptr(delta), deltatranslation, deltarotation, deltascale);
|
|
auto const wrapped = [](float Angle) { return Angle - 360.0f * std::floor((Angle + 180.0f) / 360.0f); };
|
|
glm::vec3 const turned{wrapped(deltarotation[0]), wrapped(deltarotation[1]), wrapped(deltarotation[2])};
|
|
m_editor.rotate(model, turned, 0.0f);
|
|
selection_follow(glm::dvec3(0.0), turned, model->location());
|
|
}
|
|
else if (operation == ImGuizmo::SCALE && model)
|
|
{
|
|
model->Scale(glm::vec3(newscale[0], newscale[1], newscale[2]));
|
|
}
|
|
else
|
|
{
|
|
glm::dvec3 const newworldpos = camerapos + glm::dvec3(newtranslation[0], newtranslation[1], newtranslation[2]);
|
|
// pass Snaptoground == true so the gizmo's Y component is applied (free 3D move)
|
|
auto const before{m_node->location()};
|
|
m_editor.translate(m_node, newworldpos, true);
|
|
selection_follow(m_node->location() - before, glm::vec3(0.0f), m_node->location());
|
|
}
|
|
}
|
|
else
|
|
{
|
|
m_gizmo_using = false;
|
|
}
|
|
}
|
|
|
|
void editor_mode::render_include_gizmo(glm::mat4 const &View, glm::mat4 const &Projection, glm::dvec3 const &Camerapos)
|
|
{
|
|
m_gizmo_using = false;
|
|
if (false == m_include.placement || false == m_include.issue.empty())
|
|
return;
|
|
|
|
// parameters of the template the gizmo can drive, as indices of their values; -1 where the template has none
|
|
static char const *const positionroles[] = {"pos.x", "pos.y", "pos.z"};
|
|
static char const *const rotationroles[] = {"rot.x", "rot.y", "rot.z"};
|
|
auto const numeric_parameter = [this](char const *Role, double &Value) {
|
|
auto const index = editor_includes::parameter_with_role(m_include.info, Role) - 1;
|
|
if (index < 0 || index >= static_cast<int>(m_include.values.size()))
|
|
return -1;
|
|
auto const &text = m_include.values[index];
|
|
char *end = nullptr;
|
|
auto const number = std::strtod(text.c_str(), &end);
|
|
if (text.empty() || *end != '\0')
|
|
return -1;
|
|
Value = number;
|
|
return index;
|
|
};
|
|
int position[3], rotation[3];
|
|
double location[3] = {0.0, 0.0, 0.0}, angles[3] = {0.0, 0.0, 0.0};
|
|
auto positions = 0, rotations = 0;
|
|
for (auto axis = 0; axis < 3; ++axis)
|
|
{
|
|
position[axis] = numeric_parameter(positionroles[axis], location[axis]);
|
|
rotation[axis] = numeric_parameter(rotationroles[axis], angles[axis]);
|
|
positions += (position[axis] >= 0 ? 1 : 0);
|
|
rotations += (rotation[axis] >= 0 ? 1 : 0);
|
|
}
|
|
if (positions == 0)
|
|
return; // nothing tells where the include is
|
|
|
|
// only the axes the template has parameters for can be manipulated. a signal stands on the ground by its track: it is moved in
|
|
// the plan, at the height it has
|
|
// not waited for: a scan started again while a signal is selected would stop the editor for its whole length
|
|
if (m_include.info.category == "signal")
|
|
signal_scan(false);
|
|
auto const signal{signal_template_of(m_include.target) != nullptr};
|
|
auto operation = 0;
|
|
for (auto axis = 0; axis < 3; ++axis)
|
|
{
|
|
if (m_gizmo_op == gizmo_operation::translate && position[axis] >= 0 && false == (signal && axis == 1))
|
|
operation |= (ImGuizmo::TRANSLATE_X << axis);
|
|
else if (m_gizmo_op == gizmo_operation::rotate && rotation[axis] >= 0)
|
|
operation |= (ImGuizmo::ROTATE_X << axis);
|
|
}
|
|
if (operation == 0)
|
|
return;
|
|
auto const translating = (m_gizmo_op == gizmo_operation::translate);
|
|
|
|
// the parameters are relative to the origin in effect at the directive
|
|
auto const &offset = scene::Layers.instance(m_instance).context.offset;
|
|
glm::vec3 const relativepos = glm::vec3(offset + glm::dvec3{location[0], location[1], location[2]} - Camerapos);
|
|
float const translation[3] = {relativepos.x, relativepos.y, relativepos.z};
|
|
float const rotationangles[3] = {static_cast<float>(angles[0]), static_cast<float>(angles[1]), static_cast<float>(angles[2])};
|
|
float const scale[3] = {1.0f, 1.0f, 1.0f};
|
|
glm::mat4 matrix(1.0f);
|
|
ImGuizmo::RecomposeMatrixFromComponents(translation, rotationangles, scale, glm::value_ptr(matrix));
|
|
|
|
// moving along the axes of the include would need all three of them
|
|
ImGuizmo::MODE const mode = (m_gizmo_local && (false == translating || positions == 3)) ? ImGuizmo::LOCAL : ImGuizmo::WORLD;
|
|
glm::vec3 const snapvalue(translating ? m_gizmo_snap : 5.0f);
|
|
float const *snap = Global.ctrlState && snapvalue.x > 0.0f ? glm::value_ptr(snapvalue) : nullptr;
|
|
|
|
// in the signal tool a press on the mast drags the signal along its track: the gizmo, whose up axis runs along the
|
|
// mast, gives way over a signal and while one is dragged
|
|
auto const yield{ui()->mode() == nodebank_panel::TRACK && m_track_tab == track_tab::signals && false == ImGuizmo::IsUsing() && (m_signal.moving || m_signal.placing || signal_hit() >= 0)};
|
|
ImGuizmo::Enable(false == yield);
|
|
ImGuizmo::Manipulate(glm::value_ptr(View), glm::value_ptr(Projection), static_cast<ImGuizmo::OPERATION>(operation), mode, glm::value_ptr(matrix), nullptr, snap);
|
|
ImGuizmo::Enable(true);
|
|
|
|
if (false == ImGuizmo::IsUsing())
|
|
{
|
|
signal_gizmo_end();
|
|
return;
|
|
}
|
|
m_gizmo_using = true;
|
|
signal_gizmo_begin();
|
|
|
|
float newtranslation[3], newrotation[3], newscale[3];
|
|
ImGuizmo::DecomposeMatrixToComponents(glm::value_ptr(matrix), newtranslation, newrotation, newscale);
|
|
if (translating)
|
|
{
|
|
glm::dvec3 const newlocation = Camerapos + glm::dvec3{newtranslation[0], newtranslation[1], newtranslation[2]} - offset;
|
|
for (auto axis = 0; axis < 3; ++axis)
|
|
{
|
|
if (position[axis] >= 0)
|
|
m_include.values[position[axis]] = editor_includes::number(newlocation[axis]);
|
|
}
|
|
}
|
|
else
|
|
{
|
|
if (rotations == 1)
|
|
{
|
|
// the decomposition spreads a turn of more than a quarter over all three angles;
|
|
// with a single axis to turn around the angle is taken straight from the matrix
|
|
newrotation[0] = glm::degrees(std::atan2(matrix[1][2], matrix[1][1]));
|
|
newrotation[1] = glm::degrees(std::atan2(-matrix[0][2], matrix[0][0]));
|
|
newrotation[2] = glm::degrees(std::atan2(matrix[0][1], matrix[0][0]));
|
|
}
|
|
for (auto axis = 0; axis < 3; ++axis)
|
|
{
|
|
if (rotation[axis] >= 0)
|
|
m_include.values[rotation[axis]] = editor_includes::number(clamp_circular(newrotation[axis]));
|
|
}
|
|
}
|
|
apply_include();
|
|
signal_gizmo_step();
|
|
}
|
|
|
|
glm::mat4 editor_mode::projection_matrix(float const Aspect)
|
|
{
|
|
if (Global.EditorOrtho)
|
|
{
|
|
auto const height{Global.EditorOrthoExtent};
|
|
return glm::ortho(-height * Aspect, height * Aspect, -height, height, -10000.0f, 10000.0f);
|
|
}
|
|
return glm::perspective(glm::radians(Global.FieldOfView / Global.ZoomFactor), Aspect, 0.1f, 10000.0f);
|
|
}
|
|
|
|
void editor_mode::toggle_ortho()
|
|
{
|
|
// the view from above isn't one from the track, the ride ends
|
|
m_ride.leave();
|
|
Global.EditorOrtho = !Global.EditorOrtho;
|
|
// either way: a scenery made in the wizard opens seen from above already
|
|
first_step_done(first_step::top);
|
|
if (Global.EditorOrtho)
|
|
{
|
|
m_ortho_pitch = Camera.Angle.x;
|
|
Camera.Angle.x = -M_PI_2;
|
|
Camera.Angle.z = 0.0;
|
|
}
|
|
else
|
|
{
|
|
Camera.Angle.x = m_ortho_pitch;
|
|
ortho_pan_stop();
|
|
camera_above_ground();
|
|
}
|
|
}
|
|
|
|
void editor_mode::ortho_pan_to(double const Horizontal, double const Vertical)
|
|
{
|
|
auto const &io{ImGui::GetIO()};
|
|
if (io.DisplaySize.y <= 0.0f)
|
|
return;
|
|
auto const dx{Horizontal - m_ortho_pan_cursor.x};
|
|
auto const dy{Vertical - m_ortho_pan_cursor.y};
|
|
m_ortho_pan_cursor = {Horizontal, Vertical};
|
|
auto const scale{Global.EditorOrtho ? 2.0 * static_cast<double>(Global.EditorOrthoExtent) / static_cast<double>(io.DisplaySize.y) : m_pan_metres};
|
|
// looked at from the side, a pixel up the screen is more of the ground than one across
|
|
auto const along{Global.EditorOrtho ? 1.0 : 1.0 / std::max(0.25, std::abs(std::sin(static_cast<double>(Camera.Angle.x))))};
|
|
auto const world{RotateY(glm::dvec3{dx * scale, 0.0, dy * scale * along}, static_cast<double>(Camera.Angle.y))};
|
|
m_ride.leave();
|
|
Camera.Pos.x -= world.x;
|
|
Camera.Pos.z -= world.z;
|
|
Camera.Velocity = {};
|
|
m_focus_active = false;
|
|
Global.pCamera = Camera;
|
|
}
|
|
|
|
void editor_mode::ortho_pan_stop()
|
|
{
|
|
m_ortho_pan = false;
|
|
}
|
|
|
|
void editor_mode::on_scroll(double const Xoffset, double const Yoffset)
|
|
{
|
|
if (false == ImGui::GetIO().WantCaptureMouse && track_wheel(Yoffset != 0.0 ? Yoffset : Xoffset))
|
|
return;
|
|
// riding along the track the wheel the tools left raises and lowers the camera over the rails
|
|
if (m_ride.active())
|
|
{
|
|
if (false == ImGui::GetIO().WantCaptureMouse && Yoffset != 0.0)
|
|
m_ride.wheel(std::clamp(Yoffset, -2.0, 2.0));
|
|
return;
|
|
}
|
|
// a swipe on a touchpad goes on after the cursor left the window, with no place for the ray under it
|
|
if (ImGui::GetIO().WantCaptureMouse || Yoffset == 0.0 || false == ImGui::IsMousePosValid())
|
|
return;
|
|
// a fast swipe on a touchpad can come as one big step
|
|
auto const notches{std::clamp(Yoffset, -2.0, 2.0)};
|
|
if (false == Global.EditorOrtho)
|
|
{
|
|
// in 3D the camera flies along the ray under the cursor, by a share of the distance to what it points at;
|
|
// a touchpad sends many small steps, together they come to the same
|
|
screen_projection const projection;
|
|
glm::dvec3 origin;
|
|
glm::dvec3 direction;
|
|
projection.ray(ImGui::GetIO().MousePos, origin, direction);
|
|
// with nothing under the cursor, the ground under the camera stands for it: the level 0 can lie far below the terrain
|
|
std::vector<char> found;
|
|
auto const below{ground_heights({Camera.Pos}, false, &found)};
|
|
auto const ground{found[0] != 0 ? below[0] : 0.0};
|
|
auto const height{std::max(2.0, std::abs(Camera.Pos.y - ground))};
|
|
glm::dvec3 level;
|
|
auto distance{std::min(GfxRenderer->Mouse_Hit() ? glm::length(GfxRenderer->Mouse_Position()) : projection.on_level(ImGui::GetIO().MousePos, ground, level) ? glm::distance(level, origin) : 2.0 * height, 20000.0)};
|
|
// backing away from a point on the horizon would throw the camera kilometres up
|
|
if (notches < 0.0)
|
|
distance = std::min(distance, std::max(100.0, 4.0 * height));
|
|
auto step{distance * (1.0 - std::pow(0.85, notches))};
|
|
// no nearer than 2 m to the point, not through it
|
|
if (notches > 0.0)
|
|
step = std::max(0.0, std::min(step, distance - 2.0));
|
|
// a point under the cursor which isn't a number, as one on a broken path, moves the camera nowhere
|
|
if (false == std::isfinite(step) || glm::any(glm::isnan(direction)) || glm::any(glm::isinf(direction)))
|
|
return;
|
|
Camera.Pos += direction * step;
|
|
Global.pCamera = Camera;
|
|
return;
|
|
}
|
|
auto const before{Global.EditorOrthoExtent};
|
|
auto const after{std::clamp(before * static_cast<float>(std::pow(0.85, notches)), 5.0f, 50000.0f)};
|
|
screen_projection const projection;
|
|
glm::dvec3 origin;
|
|
glm::dvec3 direction;
|
|
projection.ray(ImGui::GetIO().MousePos, origin, direction);
|
|
auto const scale{static_cast<double>(after) / static_cast<double>(before)};
|
|
Camera.Pos.x = origin.x + (Camera.Pos.x - origin.x) * scale;
|
|
Camera.Pos.z = origin.z + (Camera.Pos.z - origin.z) * scale;
|
|
Global.EditorOrthoExtent = after;
|
|
Global.pCamera = Camera;
|
|
}
|
|
|
|
void editor_mode::update_camera(double const Deltatime)
|
|
{
|
|
Camera.Update();
|
|
if (Global.EditorOrtho)
|
|
{
|
|
Camera.Angle.x = -M_PI_2;
|
|
Camera.Angle.z = 0.0;
|
|
}
|
|
// riding along the track the camera goes where the track takes it, a framing doesn't fly it off
|
|
if (m_ride.active())
|
|
{
|
|
m_focus_active = false;
|
|
m_ride.advance(Camera, Deltatime, m_input.mouse.button(GLFW_MOUSE_BUTTON_RIGHT) == GLFW_PRESS);
|
|
}
|
|
|
|
// focus animation runs after Camera.Update() so it overrides any residual velocity/rotation;
|
|
// it smoothly drives both position and orientation toward the framed object
|
|
if (m_focus_active)
|
|
{
|
|
m_focus_time += Deltatime;
|
|
double t = m_focus_duration > 0.0 ? m_focus_time / m_focus_duration : 1.0;
|
|
if (t >= 1.0)
|
|
t = 1.0;
|
|
// smoothstep easing
|
|
float const s = static_cast<float>(t * t * (3.0 - 2.0 * t));
|
|
|
|
Camera.Pos = glm::mix(m_focus_start_pos, m_focus_target_pos, static_cast<double>(s));
|
|
|
|
// interpolate angles, taking the shortest path around the yaw wrap-around
|
|
constexpr float TWO_PI = 6.283185307179586f;
|
|
float const dyaw = std::remainder(m_focus_target_angle.y - m_focus_start_angle.y, TWO_PI);
|
|
Camera.Angle.x = m_focus_start_angle.x + (m_focus_target_angle.x - m_focus_start_angle.x) * s;
|
|
Camera.Angle.y = m_focus_start_angle.y + dyaw * s;
|
|
Camera.Angle.z = m_focus_start_angle.z + (m_focus_target_angle.z - m_focus_start_angle.z) * s;
|
|
|
|
// suppress any residual fly velocity so it doesn't fight the animation
|
|
Camera.Velocity = glm::dvec3(0.0);
|
|
|
|
if (t >= 1.0)
|
|
m_focus_active = false;
|
|
}
|
|
|
|
// reset window state (will be set again if UI requires it)
|
|
Global.CabWindowOpen = false;
|
|
|
|
// a camera at no finite place, as a zoom or a framing aimed at a broken path could put it, draws nothing sane and can
|
|
// stall the graphics card: it goes back to where it last was
|
|
auto const number = [](auto const &Vector) { return false == glm::any(glm::isnan(Vector)) && false == glm::any(glm::isinf(Vector)); };
|
|
if (number(Camera.Pos) && number(Camera.Angle))
|
|
{
|
|
m_camera_finite_pos = Camera.Pos;
|
|
m_camera_finite_angle = Camera.Angle;
|
|
m_camera_finite = true;
|
|
}
|
|
else if (m_camera_finite)
|
|
{
|
|
WriteLog("Editor: the camera went to no finite place, back where it was", logtype::generic);
|
|
Camera.Pos = m_camera_finite_pos;
|
|
Camera.Angle = m_camera_finite_angle;
|
|
Camera.Velocity = glm::dvec3(0.0);
|
|
m_focus_active = false;
|
|
}
|
|
|
|
// publish camera back to global copy
|
|
Global.pCamera = Camera;
|
|
}
|
|
|
|
glm::dvec3 editor_mode::camera_look() const
|
|
{
|
|
return {-std::sin(Camera.Angle.y), 0.0, -std::cos(Camera.Angle.y)};
|
|
}
|
|
|
|
void editor_mode::ride_enter()
|
|
{
|
|
// the track under the cursor, else the one nearest the ground under it, else the one nearest the camera
|
|
auto under{track_under_cursor(nullptr, 30.0f)};
|
|
auto *track{under.track};
|
|
auto path{under.path};
|
|
auto point{under.point};
|
|
if (track == nullptr && ImGui::IsMousePosValid())
|
|
{
|
|
point = std::as_const(*this).cursor_ground();
|
|
track = kilometrage::track_near(point, 30.0, path);
|
|
}
|
|
if (track == nullptr)
|
|
{
|
|
point = Camera.Pos;
|
|
track = kilometrage::track_near(point, 200.0, path);
|
|
}
|
|
if (false == m_ride.enter(track, path, point, camera_look(), true))
|
|
ui()->set_status(STR_C("No track nearby"), true);
|
|
}
|
|
|
|
void editor_mode::enter()
|
|
{
|
|
m_statebackup = {Global.pCamera, FreeFlyModeFlag, Global.ControlPicking};
|
|
// the editor changes the tracks, their sleepers are worked out as they're needed
|
|
track_sleepers::lay_in_background(false);
|
|
// the editor may remove the tracks and the vehicles the recording refers to: it ends here
|
|
simulation::Blackbox.close();
|
|
|
|
if (simulation::Region != nullptr)
|
|
{
|
|
// the editor works with geometry of the whole scenery, including the parts of binary terrain which weren't needed so far
|
|
simulation::Region->load_terrain();
|
|
}
|
|
|
|
Camera = Global.pCamera;
|
|
|
|
if (!FreeFlyModeFlag)
|
|
{
|
|
auto const *vehicle = Camera.m_owner;
|
|
if (vehicle)
|
|
{
|
|
const int cab = vehicle->MoverParameters->CabOccupied == 0 ? 1 : vehicle->MoverParameters->CabOccupied;
|
|
const glm::dvec3 left = vehicle->VectorLeft() * (double)cab;
|
|
Camera.Pos = glm::dvec3(Camera.Pos.x, vehicle->GetPosition().y, Camera.Pos.z) + left * vehicle->GetWidth() + glm::dvec3(1.25f * left.x, 1.6f, 1.25f * left.z);
|
|
Camera.m_owner = nullptr;
|
|
Camera.LookAt = vehicle->GetPosition();
|
|
Camera.RaLook(); // single camera reposition
|
|
FreeFlyModeFlag = true;
|
|
}
|
|
}
|
|
|
|
if (Global.editor_session && false == m_opened_at_track)
|
|
{
|
|
m_opened_at_track = true;
|
|
auto const saved{scene::Layers.empty() ? std::vector<std::string>{} : scene::Layers.marked(scene::layer_handle{1}, "//$c")};
|
|
if (false == saved.empty())
|
|
{
|
|
std::istringstream values(saved.front());
|
|
glm::dvec3 position{0.0};
|
|
glm::vec3 angle{0.0f};
|
|
if (values >> position.x >> position.y >> position.z >> angle.x >> angle.y)
|
|
{
|
|
Camera.Pos = position;
|
|
Camera.Angle = angle;
|
|
Camera.m_owner = nullptr;
|
|
FreeFlyModeFlag = true;
|
|
Global.pCamera = Camera;
|
|
m_saved_camera = {position, angle};
|
|
WriteLog("Editor: camera where it was at the last save");
|
|
}
|
|
}
|
|
for (auto *track : simulation::Paths.sequence())
|
|
{
|
|
if (m_saved_camera.has_value() || track == nullptr || track->m_editorremoved || track->m_paths.empty())
|
|
continue;
|
|
auto const &path{track->m_paths.front()};
|
|
auto const start{path.points[segment_data::point::start]};
|
|
auto const end{path.points[segment_data::point::end]};
|
|
auto const centre{0.5 * (start + end)};
|
|
glm::dvec3 along{end.x - start.x, 0.0, end.z - start.z};
|
|
along = glm::length(along) > 1e-6 ? glm::normalize(along) : glm::dvec3{0.0, 0.0, 1.0};
|
|
glm::dvec3 const side{-along.z, 0.0, along.x};
|
|
Camera.Pos = centre - along * 30.0 + side * 15.0 + glm::dvec3{0.0, 20.0, 0.0};
|
|
auto const look{glm::normalize(centre - Camera.Pos)};
|
|
Camera.Angle = glm::vec3(static_cast<float>(std::asin(std::clamp(look.y, -1.0, 1.0))), static_cast<float>(std::atan2(-look.x, -look.z)), 0.0f);
|
|
Camera.m_owner = nullptr;
|
|
FreeFlyModeFlag = true;
|
|
Global.pCamera = Camera;
|
|
WriteLog("Editor: camera at the first track, " + track->name());
|
|
break;
|
|
}
|
|
if (false == m_saved_camera.has_value() && simulation::Paths.sequence().empty())
|
|
{
|
|
std::vector<char> found;
|
|
auto const ground{ground_heights({glm::dvec3{0.0, 5000.0, 0.0}}, true, &found).front()};
|
|
Camera.Pos = glm::dvec3{0.0, (found.front() != 0 ? ground : 0.0) + 60.0, 0.0};
|
|
// facing north, the top view with the north up as on a map: the yaw 0 looks along -z, to the south
|
|
Camera.Angle = glm::vec3(glm::radians(-45.0f), glm::pi<float>(), 0.0f);
|
|
Camera.m_owner = nullptr;
|
|
FreeFlyModeFlag = true;
|
|
if (false == Global.EditorOrtho)
|
|
{
|
|
Global.EditorOrthoExtent = 150.0f;
|
|
toggle_ortho();
|
|
}
|
|
Global.pCamera = Camera;
|
|
choose_work_area(work_area::tracks);
|
|
WriteLog("Editor: camera over the origin of the empty scenery");
|
|
}
|
|
m_first_steps_open = EditorSettings.first_steps();
|
|
}
|
|
|
|
Global.ControlPicking = true;
|
|
EditorModeFlag = true;
|
|
|
|
load_orthophoto_settings();
|
|
m_orthophoto.area_paused(m_area_paused);
|
|
m_nmt.prefetch_paused(m_area_paused);
|
|
|
|
Application.set_cursor(GLFW_CURSOR_NORMAL);
|
|
}
|
|
|
|
void editor_mode::exit()
|
|
{
|
|
m_ride.leave();
|
|
track_sleepers::lay_in_background(true);
|
|
Global.editor_tracks = false;
|
|
EditorModeFlag = false;
|
|
Global.ControlPicking = m_statebackup.picking;
|
|
FreeFlyModeFlag = m_statebackup.freefly;
|
|
Global.pCamera = m_statebackup.camera;
|
|
|
|
commit_track_drag(true);
|
|
m_track_gizmo_using = false;
|
|
m_track_drag.clear();
|
|
m_track_drag_points.clear();
|
|
m_track_snap = {};
|
|
m_track_point = {};
|
|
m_route = {};
|
|
m_route_dragging = false;
|
|
if (Global.EditorOrtho)
|
|
toggle_ortho();
|
|
|
|
g_redo.clear();
|
|
m_history.clear();
|
|
m_orphans.clear();
|
|
m_fill_last.clear();
|
|
m_orthophoto.cancel_pending();
|
|
m_orthophoto.detach_scene(); // the layer is an editor aid, keep it out of the other modes
|
|
for (auto &layer : m_wms)
|
|
{
|
|
layer->cancel_pending();
|
|
layer->detach_scene();
|
|
}
|
|
// the download of the area held while the scenery is driven, it goes on once the editor is back
|
|
m_orthophoto.area_paused(true);
|
|
m_nmt.prefetch_paused(true);
|
|
scene::Layers.show_all(); // likewise for hidden scenery layers, the other modes get the scenery as it was defined
|
|
|
|
// drop selection so a stale/dangling node pointer isn't used on the next editor session
|
|
m_node = nullptr;
|
|
select_include(0);
|
|
m_gizmo_using = false;
|
|
ui()->set_node(nullptr);
|
|
|
|
Application.set_cursor(Global.ControlPicking ? GLFW_CURSOR_NORMAL : GLFW_CURSOR_DISABLED);
|
|
|
|
if (!Global.ControlPicking)
|
|
{
|
|
Application.set_cursor_pos(0, 0);
|
|
}
|
|
}
|
|
|
|
void editor_mode::delete_model(TAnimModel *model, bool const Joined)
|
|
{
|
|
// record deletion for undo (serialize full node)
|
|
std::string as_text;
|
|
|
|
model->export_as_text(as_text);
|
|
std::string debug = "Deleting node: " + as_text + "\nSerialized data:\n";
|
|
push_snapshot(model, EditorSnapshot::Action::Delete, as_text);
|
|
if (false == m_history.empty())
|
|
m_history.back().joined = Joined;
|
|
WriteLog(debug, logtype::generic);
|
|
|
|
erase_model(model);
|
|
}
|
|
|
|
void editor_mode::erase_model(TAnimModel *model)
|
|
{
|
|
nullify_history_pointers(model);
|
|
remove_from_hierarchy(model);
|
|
if (m_node == model)
|
|
{
|
|
m_node = nullptr;
|
|
m_dragging = false;
|
|
}
|
|
simulation::State.delete_model(model);
|
|
}
|
|
|
|
void editor_mode::delete_selected()
|
|
{
|
|
// what's selected: a road piece or point, a signal, an include of a scenery template, a model, tracks
|
|
if (road_delete())
|
|
return;
|
|
if (m_instance != 0 && signal_delete(m_instance))
|
|
return;
|
|
if (m_instance != 0)
|
|
{
|
|
// include of a scenery template. what it shows goes out of sight, the directive is erased on save
|
|
scene::Layers.removed(m_instance, true);
|
|
EditorSnapshot snap;
|
|
snap.instance = m_instance;
|
|
snap.node_name = *scene::Layers.instance(m_instance).file;
|
|
m_history.push_back(std::move(snap));
|
|
g_redo.clear();
|
|
ui()->set_status(format(STR_C("Include of \"%s\" removed, Ctrl+Z brings it back. Its directive is erased when the scenery is saved"), scene::Layers.instance(m_instance).file->c_str()));
|
|
select_include(0);
|
|
return;
|
|
}
|
|
TAnimModel *model = dynamic_cast<TAnimModel *>(m_node);
|
|
if (model)
|
|
{
|
|
// the models of the selection go together, one step of the history
|
|
auto joined{false};
|
|
for (auto *node : selected_nodes())
|
|
{
|
|
if (auto *selected = dynamic_cast<TAnimModel *>(node))
|
|
{
|
|
delete_model(selected, joined);
|
|
joined = true;
|
|
}
|
|
}
|
|
m_selection.clear();
|
|
}
|
|
else if (ui()->mode() == nodebank_panel::TRACK && m_track_tab == track_tab::path && m_track_set.size() >= 2)
|
|
{
|
|
track_set_delete();
|
|
}
|
|
else if (selected_track() != nullptr)
|
|
{
|
|
delete_selected_track();
|
|
}
|
|
}
|
|
|
|
void editor_mode::on_key(int const Key, int const Scancode, int const Action, int const Mods)
|
|
{
|
|
#ifndef __unix__
|
|
Global.shiftState = Mods & GLFW_MOD_SHIFT ? true : false;
|
|
Global.ctrlState = Mods & GLFW_MOD_CONTROL ? true : false;
|
|
Global.altState = Mods & GLFW_MOD_ALT ? true : false;
|
|
#endif
|
|
bool anyModifier = Mods & (GLFW_MOD_SHIFT | GLFW_MOD_CONTROL | GLFW_MOD_ALT);
|
|
|
|
if (Action == GLFW_RELEASE && Key >= 0 && Key <= GLFW_KEY_LAST)
|
|
{
|
|
input::keys[Key] = GLFW_RELEASE;
|
|
if (Key == GLFW_KEY_LEFT_SHIFT || Key == GLFW_KEY_RIGHT_SHIFT)
|
|
input::key_shift = false;
|
|
if (Key == GLFW_KEY_LEFT_CONTROL || Key == GLFW_KEY_RIGHT_CONTROL)
|
|
input::key_ctrl = false;
|
|
if (Key == GLFW_KEY_LEFT_ALT || Key == GLFW_KEY_RIGHT_ALT)
|
|
input::key_alt = false;
|
|
}
|
|
|
|
// first give UI a chance to handle the key
|
|
if (!anyModifier && m_userinterface->on_key(Key, Action))
|
|
return;
|
|
|
|
// riding along the track the keys drive the camera; Y starts the ride on the track under the cursor
|
|
if (false == ImGui::GetIO().WantTextInput)
|
|
{
|
|
std::string status;
|
|
auto const taken{m_ride.key(Key, Action, Mods, camera_look(), m_input.mouse.button(GLFW_MOUSE_BUTTON_RIGHT) == GLFW_PRESS, status)};
|
|
if (false == status.empty())
|
|
ui()->set_status(status, m_ride.active());
|
|
if (taken)
|
|
{
|
|
// the right button held to drive isn't a click for the menu of the track under the cursor
|
|
m_track_context.armed = false;
|
|
return;
|
|
}
|
|
// not with a button held: a drag going on would lose its release to the ride
|
|
if (Key == GLFW_KEY_Y && Action == GLFW_PRESS && false == anyModifier && false == m_ride.active() && m_input.mouse.button(GLFW_MOUSE_BUTTON_RIGHT) != GLFW_PRESS && m_input.mouse.button(GLFW_MOUSE_BUTTON_LEFT) != GLFW_PRESS)
|
|
{
|
|
ride_enter();
|
|
return;
|
|
}
|
|
}
|
|
|
|
if (ui()->mode() == nodebank_panel::TRACK && is_press(Action) && (Mods & (GLFW_MOD_CONTROL | GLFW_MOD_ALT)) == 0 && typed_key(Key))
|
|
return;
|
|
|
|
// gizmo transform shortcuts (Q/W/E/R) — only when the camera isn't being flown (RMB up).
|
|
// handled before the camera keyboard step because Q/W/E are also the fly-mode movement keys,
|
|
// which would otherwise consume them.
|
|
if (!anyModifier && is_press(Action)
|
|
&& m_input.mouse.button(GLFW_MOUSE_BUTTON_RIGHT) != GLFW_PRESS)
|
|
{
|
|
if (ui()->mode() == nodebank_panel::TRACK && false == m_track_gizmo_using && false == m_straights.dragging && false == m_switch.placing && track_shortcut(Key))
|
|
return;
|
|
bool handled = true;
|
|
switch (Key)
|
|
{
|
|
case GLFW_KEY_O: toggle_ortho(); break;
|
|
// in the tracks they also bring the gizmo out, hidden until then
|
|
case GLFW_KEY_Q: m_gizmo_op = gizmo_operation::translate; m_track_gizmo_on |= ui()->mode() == nodebank_panel::TRACK; break;
|
|
case GLFW_KEY_W: m_gizmo_op = gizmo_operation::rotate; m_track_gizmo_on |= ui()->mode() == nodebank_panel::TRACK; break;
|
|
case GLFW_KEY_E: m_gizmo_op = gizmo_operation::scale; m_track_gizmo_on |= ui()->mode() == nodebank_panel::TRACK; break;
|
|
case GLFW_KEY_R: m_gizmo_local = !m_gizmo_local; break;
|
|
case GLFW_KEY_B: handled = ui()->mode() != nodebank_panel::TRACK && bend_shortcut(); break;
|
|
case GLFW_KEY_F1: m_shortcuts_open = !m_shortcuts_open; break;
|
|
// the fields of work in the order of their row
|
|
case GLFW_KEY_F2: choose_work_area(work_area::surroundings); break;
|
|
case GLFW_KEY_F3: choose_work_area(work_area::tracks); break;
|
|
case GLFW_KEY_F4: choose_work_area(work_area::roads); break;
|
|
case GLFW_KEY_F5: choose_work_area(work_area::terrain); break;
|
|
// the edit modes in the order of the toolbar; in the track mode the digits typed as a value were taken already
|
|
case GLFW_KEY_1: handled = ui()->mode() != nodebank_panel::TRACK; if (handled) choose_edit_mode(nodebank_panel::MODIFY); break;
|
|
case GLFW_KEY_2: handled = ui()->mode() != nodebank_panel::TRACK; if (handled) choose_edit_mode(nodebank_panel::ADD); break;
|
|
case GLFW_KEY_3: handled = ui()->mode() != nodebank_panel::TRACK; if (handled) choose_edit_mode(nodebank_panel::BRUSH); break;
|
|
case GLFW_KEY_4: handled = ui()->mode() != nodebank_panel::TRACK; if (handled) choose_edit_mode(nodebank_panel::FILL); break;
|
|
case GLFW_KEY_5: handled = ui()->mode() != nodebank_panel::TRACK; if (handled) choose_edit_mode(nodebank_panel::COPY); break;
|
|
default: handled = false; break;
|
|
}
|
|
if (handled)
|
|
return;
|
|
}
|
|
|
|
// the minimap with the stations
|
|
if (Global.ctrlState && false == Global.shiftState && Key == GLFW_KEY_M)
|
|
{
|
|
if (is_press(Action))
|
|
m_minimap.toggle();
|
|
return;
|
|
}
|
|
|
|
// all docks unpinned and hidden at the edges, for the most of the view, or pinned back
|
|
if (Global.ctrlState && false == Global.shiftState && Key == GLFW_KEY_SPACE)
|
|
{
|
|
if (is_press(Action))
|
|
ui()->toggle_docks();
|
|
return;
|
|
}
|
|
|
|
// the selection: copy, paste at the cursor, group and ungroup. ahead of the camera keys, the letters may be bound there
|
|
if (Global.ctrlState && (Key == GLFW_KEY_C || Key == GLFW_KEY_V || Key == GLFW_KEY_G) && ui()->mode() != nodebank_panel::TRACK && false == m_roadtool.window)
|
|
{
|
|
if (is_press(Action))
|
|
{
|
|
if (Key == GLFW_KEY_C)
|
|
copy_selection();
|
|
else if (Key == GLFW_KEY_V)
|
|
paste_clipboard(cursor_ground());
|
|
else if (Global.shiftState)
|
|
ungroup_selection();
|
|
else
|
|
group_selection();
|
|
}
|
|
return;
|
|
}
|
|
|
|
// the properties of a track copied and pasted on the selected ones
|
|
if (Global.ctrlState && Global.shiftState && (Key == GLFW_KEY_C || Key == GLFW_KEY_V) && ui()->mode() == nodebank_panel::TRACK)
|
|
{
|
|
if (is_press(Action) && false == ImGui::GetIO().WantTextInput)
|
|
{
|
|
auto const tracks{selected_tracks()};
|
|
if (Key == GLFW_KEY_C)
|
|
{
|
|
// the selected track, or the one under the cursor when there are more of them
|
|
auto *from{tracks.size() == 1 ? tracks.front() : m_hover.track};
|
|
if (from != nullptr)
|
|
copy_track_style(*from);
|
|
else
|
|
ui()->set_status(STR_C("Select one track, or point at one, to take its properties"), true);
|
|
}
|
|
else if (m_track_style.values.empty())
|
|
ui()->set_status(STR_C("Take the properties of a track first: Ctrl+Shift+C"), true);
|
|
else if (tracks.empty())
|
|
ui()->set_status(STR_C("Select the tracks to set the properties on"), true);
|
|
else
|
|
paste_track_style(tracks);
|
|
}
|
|
return;
|
|
}
|
|
|
|
// save; checked ahead of the camera keys, which have S bound to moving back
|
|
if (Global.ctrlState && false == Global.shiftState && Key == GLFW_KEY_S)
|
|
{
|
|
if (is_press(Action))
|
|
save();
|
|
return;
|
|
}
|
|
|
|
if (Global.ctrlState && false == Global.shiftState && Key == GLFW_KEY_F && ui()->mode() == nodebank_panel::TRACK)
|
|
{
|
|
if (is_press(Action))
|
|
{
|
|
show_track_tab(m_track_tab);
|
|
m_track_search.focus = true;
|
|
}
|
|
return;
|
|
}
|
|
|
|
// then internal input handling
|
|
if (m_input.keyboard.key(Key, Action))
|
|
return;
|
|
|
|
if (Action == GLFW_RELEASE)
|
|
return;
|
|
|
|
// shortcuts: undo/redo. not in the middle of a drag, it would go on from the state which was undone
|
|
if (Global.ctrlState && (Key == GLFW_KEY_Z || Key == GLFW_KEY_Y) && is_press(Action) && (m_track_gizmo_using || m_track_set_using || m_straights.dragging || m_extend.active || m_switch.placing || m_point_drag.active || m_handle_drag.active || m_roadtool.lifting))
|
|
return;
|
|
if (Global.ctrlState && Key == GLFW_KEY_Z && is_press(Action))
|
|
{
|
|
undo_last();
|
|
return;
|
|
}
|
|
if (Global.ctrlState && Key == GLFW_KEY_Y && is_press(Action))
|
|
{
|
|
redo_last();
|
|
return;
|
|
}
|
|
|
|
// legacy hardcoded keyboard commands
|
|
switch (Key)
|
|
{
|
|
case GLFW_KEY_F11:
|
|
if (Action != GLFW_PRESS)
|
|
break;
|
|
|
|
if (!Global.ctrlState && !Global.shiftState)
|
|
{
|
|
Application.pop_mode();
|
|
}
|
|
else if (Global.ctrlState && Global.shiftState)
|
|
{
|
|
export_scenery();
|
|
}
|
|
break;
|
|
|
|
case GLFW_KEY_F12:
|
|
if (Global.ctrlState && Global.shiftState && is_press(Action))
|
|
{
|
|
DebugModeFlag = !DebugModeFlag;
|
|
}
|
|
break;
|
|
|
|
case GLFW_KEY_DELETE:
|
|
// the chunks of the terrain selected, where the terrain is the field of work; else what's selected in the scenery
|
|
if (is_press(Action) && m_terrain_open && false == m_terrain_selection.empty())
|
|
remove_selected_chunks();
|
|
else if (is_press(Action))
|
|
delete_selected();
|
|
break;
|
|
|
|
case GLFW_KEY_ESCAPE:
|
|
// an open list or menu takes this Esc for itself, the selection behind it stays
|
|
if (ImGui::IsPopupOpen("", ImGuiPopupFlags_AnyPopupId | ImGuiPopupFlags_AnyPopupLevel))
|
|
break;
|
|
// the switch being clicked off the view given up
|
|
if (is_press(Action) && m_switch_designer.open && m_switch_designer.picking)
|
|
{
|
|
m_switch_designer.picking = false;
|
|
break;
|
|
}
|
|
// the download area being drawn given up, the one before stays
|
|
if (is_press(Action) && m_area_drawing.active)
|
|
{
|
|
area_finish(false);
|
|
break;
|
|
}
|
|
if (is_press(Action))
|
|
{
|
|
road_cancel();
|
|
}
|
|
// the first Esc drops what is going on in the track mode, the next one goes back to the selection
|
|
if (is_press(Action) && ui()->mode() == nodebank_panel::TRACK)
|
|
{
|
|
if (m_tape.active)
|
|
m_tape = {};
|
|
else if (m_route.trace.active && route_active())
|
|
route_trace_end(false);
|
|
else if (m_lay.active && false == m_lay.points.empty())
|
|
lay_escape();
|
|
else if (m_track_style.picking)
|
|
m_track_style.picking = false;
|
|
else if (m_profile.picking)
|
|
m_profile.picking = false;
|
|
else if (track_busy())
|
|
{
|
|
cancel_track_tools();
|
|
m_straights.tool = 0;
|
|
}
|
|
else if (m_track_tab == track_tab::signals && m_signal.picking_read)
|
|
m_signal.picking_read = false;
|
|
else if (m_track_tab == track_tab::signals && m_signal.armed)
|
|
m_signal.armed = false;
|
|
else if (m_track_tab == track_tab::path && m_track_set.size() >= 2)
|
|
select_tracks({});
|
|
else if (m_track_tab != track_tab::path)
|
|
show_track_tab(track_tab::path);
|
|
else if (selected_track() != nullptr)
|
|
{
|
|
m_node = nullptr;
|
|
m_track_point = {};
|
|
ui()->set_node(nullptr);
|
|
}
|
|
}
|
|
break;
|
|
|
|
case GLFW_KEY_TAB:
|
|
// a switch dragged from a free end and bent: its diverging track the other way than the main one, or the same way
|
|
if (is_press(Action) && false == anyModifier && m_switch.placing && m_switch.free && false == ImGui::GetIO().WantTextInput)
|
|
{
|
|
m_switch.one_sided = false == m_switch.one_sided;
|
|
break;
|
|
}
|
|
// laying: the bends of straights or a curve traced, for the points clicked from now on
|
|
if (is_press(Action) && false == anyModifier && ui()->mode() == nodebank_panel::TRACK && m_lay.active && false == ImGui::GetIO().WantTextInput)
|
|
lay_switch_mode();
|
|
break;
|
|
|
|
case GLFW_KEY_BACKSPACE:
|
|
// the switch being clicked off the view: the last point taken back
|
|
if (m_switch_designer.open && m_switch_designer.picking)
|
|
{
|
|
if (is_press(Action) && false == m_switch_designer.clicks.empty())
|
|
{
|
|
m_switch_designer.clicks.pop_back();
|
|
switch_designer_measure();
|
|
}
|
|
break;
|
|
}
|
|
// the download area: the last point taken back
|
|
if (is_press(Action) && m_area_drawing.active)
|
|
{
|
|
if (false == m_area_drawing.points.empty())
|
|
m_area_drawing.points.pop_back();
|
|
break;
|
|
}
|
|
// area fill: remove the last outline point
|
|
if (is_press(Action) && ui()->mode() == nodebank_panel::FILL && !m_fill_points.empty())
|
|
m_fill_points.pop_back();
|
|
if (is_press(Action) && ui()->mode() == nodebank_panel::TRACK && m_lay.active && !m_lay.points.empty())
|
|
lay_back();
|
|
if (is_press(Action) && m_route.trace.active && route_active() && !m_route.trace.points.empty())
|
|
{
|
|
m_route.trace.points.pop_back();
|
|
route_trace_fit();
|
|
}
|
|
break;
|
|
|
|
case GLFW_KEY_ENTER:
|
|
case GLFW_KEY_KP_ENTER:
|
|
// the download area closed, from three points on
|
|
if (is_press(Action) && m_area_drawing.active)
|
|
{
|
|
if (m_area_drawing.points.size() >= 3)
|
|
area_finish(true);
|
|
break;
|
|
}
|
|
if (is_press(Action) && ui()->mode() == nodebank_panel::TRACK && m_lay.active)
|
|
lay_enter();
|
|
if (is_press(Action) && m_route.trace.active && route_active())
|
|
route_trace_end(true);
|
|
break;
|
|
|
|
case GLFW_KEY_K:
|
|
if (is_press(Action) && road_split())
|
|
{
|
|
break;
|
|
}
|
|
if (is_press(Action) && ui()->mode() == nodebank_panel::TRACK && selected_track() != nullptr)
|
|
{
|
|
auto const under{split_spot()};
|
|
if (under.track != nullptr)
|
|
split_track_at(*under.track, under.point);
|
|
}
|
|
break;
|
|
|
|
case GLFW_KEY_F:
|
|
if (is_press(Action) && m_node)
|
|
{
|
|
// start smooth focus camera on selected node
|
|
start_focus(m_node, 0.6);
|
|
}
|
|
break;
|
|
|
|
case GLFW_KEY_END:
|
|
if (is_press(Action) && m_node)
|
|
{
|
|
// Unreal-style "snap to floor": drop the selected node onto the surface below it.
|
|
// works against triangle geometry (shape_node terrain / opaque shapes); once a proper
|
|
// editable terrain mesh exists, dropping onto it works without further changes here.
|
|
drop_selection_to_ground();
|
|
}
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
void editor_mode::on_cursor_pos(double const Horizontal, double const Vertical)
|
|
{
|
|
if (m_ortho_pan)
|
|
ortho_pan_to(Horizontal, Vertical);
|
|
// object transforms are handled by the gizmo now; here we only forward the cursor to the
|
|
// mouse input, which rotates the camera while the right mouse button is held (panning mode)
|
|
m_input.mouse.position(Horizontal, Vertical);
|
|
}
|
|
|
|
void editor_mode::on_mouse_button(int const Button, int const Action, int const Mods)
|
|
{
|
|
// UI first
|
|
if (m_userinterface->on_mouse_button(Button, Action))
|
|
{
|
|
m_input.mouse.button(Button, Action);
|
|
return;
|
|
}
|
|
|
|
// a switch being clicked off the view for the template editor takes the left button
|
|
if (m_switch_designer.open && m_switch_designer.picking && Button == GLFW_MOUSE_BUTTON_LEFT)
|
|
{
|
|
// on the terrain under the cursor, then on the level of the first point: no track or ballast in the view catches the point
|
|
if (is_press(Action))
|
|
switch_designer_click(m_switch_designer.clicks.empty() ? cursor_terrain(std::as_const(*this).cursor_ground().y) : cursor_level(m_switch_designer.clicks.front().y));
|
|
m_input.mouse.button(Button, Action);
|
|
return;
|
|
}
|
|
|
|
// the download area drawn on the map takes the left button while it's drawn
|
|
if (m_area_drawing.active && Button == GLFW_MOUSE_BUTTON_LEFT)
|
|
{
|
|
if (is_press(Action))
|
|
area_click(Global.shiftState);
|
|
else
|
|
m_area_drawing.dragged = -1;
|
|
m_input.mouse.button(Button, Action);
|
|
return;
|
|
}
|
|
|
|
// the chunk, spacing and water tools of the terrain work on a click (Shift: the other way round)
|
|
if (terrain_clicking() && Button == GLFW_MOUSE_BUTTON_LEFT)
|
|
{
|
|
if (is_press(Action))
|
|
handle_terrain_click(Global.shiftState);
|
|
m_input.mouse.button(Button, Action);
|
|
return;
|
|
}
|
|
|
|
// with a brush of the terrain the left button works the brush instead of picking nodes
|
|
if (terrain_brush() && Button == GLFW_MOUSE_BUTTON_LEFT)
|
|
{
|
|
if (m_terrain_tool == terrain_tool::level && is_press(Action) && (Global.ctrlState || m_terrain_picking))
|
|
{
|
|
// a click which picks the target height doesn't level anything
|
|
pick_terrain_target();
|
|
m_terrain_picking = false;
|
|
mouseHold = false;
|
|
m_input.mouse.button(Button, Action);
|
|
return;
|
|
}
|
|
mouseHold = is_press(Action);
|
|
m_input.mouse.button(Button, Action);
|
|
return;
|
|
}
|
|
|
|
// with the road window open the left button works its tools, whichever edit mode is on but the track one
|
|
if (m_roadtool.window && Button == GLFW_MOUSE_BUTTON_LEFT && ui()->mode() != nodebank_panel::TRACK)
|
|
{
|
|
// Alt+LMB on a point: its height (and the other selected ones') dragged up or down
|
|
if (is_press(Action) && Global.altState && false == ImGui::GetIO().WantCaptureMouse && road_lift_start())
|
|
{
|
|
m_input.mouse.button(Button, Action);
|
|
return;
|
|
}
|
|
if (false == is_press(Action) && m_roadtool.lifting)
|
|
{
|
|
road_lift_finish();
|
|
m_input.mouse.button(Button, Action);
|
|
return;
|
|
}
|
|
if (is_press(Action))
|
|
{
|
|
// NOTE: the pick is resolved a few frames later, by then it's known whether the press was meant for the UI
|
|
GfxRenderer->Pick_Node_Callback([this](scene::basic_node * /*node*/) {
|
|
if (viewport_click())
|
|
road_click();
|
|
});
|
|
}
|
|
m_input.mouse.button(Button, Action);
|
|
return;
|
|
}
|
|
|
|
if (Button == GLFW_MOUSE_BUTTON_LEFT && is_press(Action) && false == m_bend.picking && ui()->mode() != nodebank_panel::TRACK && (bend_drag_start(Mods) || bend_click()))
|
|
{
|
|
m_input.mouse.button(Button, Action);
|
|
return;
|
|
}
|
|
|
|
if (m_bend.picking && Button == GLFW_MOUSE_BUTTON_LEFT && ui()->mode() != nodebank_panel::TRACK)
|
|
{
|
|
if (is_press(Action))
|
|
bend_pick(Global.pCamera.Pos + GfxRenderer->Mouse_Position());
|
|
m_input.mouse.button(Button, Action);
|
|
return;
|
|
}
|
|
|
|
if (Button == GLFW_MOUSE_BUTTON_LEFT)
|
|
{
|
|
|
|
auto const mode = ui()->mode();
|
|
auto const rotation_mode = ui()->rot_mode();
|
|
auto const fixed_rotation_value = ui()->rot_val();
|
|
|
|
if (is_press(Action))
|
|
{
|
|
mouseHold = true;
|
|
m_brush_has_last = false; // every brush stroke starts with a placement
|
|
|
|
// in area fill mode the left button only adds outline points, it doesn't touch the selection
|
|
if (mode == nodebank_panel::FILL)
|
|
{
|
|
GfxRenderer->Pick_Node_Callback([this](scene::basic_node * /*node*/) {
|
|
if (viewport_click())
|
|
add_area_fill_point();
|
|
});
|
|
m_input.mouse.button(Button, Action);
|
|
return;
|
|
}
|
|
|
|
if (mode == nodebank_panel::TRACK)
|
|
{
|
|
track_press(track_intent_at(Mods));
|
|
m_input.mouse.button(Button, Action);
|
|
return;
|
|
}
|
|
|
|
// delegate node picking behaviour depending on current panel mode.
|
|
// NOTE: the pick is resolved a few frames later, often after the button was already released,
|
|
// so the callback mustn't depend on the button still being held
|
|
// Shift+LMB adds a model to the selection, or takes it out
|
|
auto const additive{mode == nodebank_panel::MODIFY && (Mods & GLFW_MOD_SHIFT) != 0};
|
|
GfxRenderer->Pick_Node_Callback(
|
|
[this, mode, rotation_mode, fixed_rotation_value, additive](scene::basic_node *node) {
|
|
// the press turned out to be meant for the UI
|
|
if (!viewport_click())
|
|
return;
|
|
|
|
auto *const previous{m_node};
|
|
m_node = nullptr;
|
|
select_include(0);
|
|
ui()->set_node(additive ? previous : nullptr);
|
|
|
|
// in a scenery opened for editing selection has its limits. nodes of locked layers are off limits.
|
|
// nodes defined by a scenery template can't be rewritten one by one on save, so a click on one
|
|
// selects the include of the template as a whole
|
|
if (node && mode == nodebank_panel::MODIFY)
|
|
{
|
|
std::string reason;
|
|
if (node->from_template() && scene::Layers.removable(node->m_instance, &reason))
|
|
{
|
|
select_include(node->m_instance);
|
|
ui()->set_status(format(STR_C("Include of \"%s\" selected. Its parameters are in the inspector, Del removes it from the scenery"), scene::Layers.instance(m_instance).file->c_str()));
|
|
node = nullptr;
|
|
}
|
|
else if (node->from_template() || false == scene::Layers.editable(node, &reason))
|
|
{
|
|
ui()->set_status(format(STR_C("\"%s\" can't be edited: %s"), name_of(*node).c_str(), reason.c_str()), true);
|
|
node = nullptr;
|
|
}
|
|
}
|
|
|
|
// models stay within placement distance; tracks in the track workspace have no range cap
|
|
if (node && false == (Global.editor_tracks && dynamic_cast<TTrack *>(node) != nullptr)) {
|
|
double const dist = glm::distance(node->location(), glm::dvec3{Global.pCamera.Pos});
|
|
if (dist > static_cast<double>(kMaxPlacementDistance))
|
|
{
|
|
if (additive)
|
|
m_node = previous;
|
|
return;
|
|
}
|
|
}
|
|
if (mode == nodebank_panel::MODIFY)
|
|
{
|
|
if (additive)
|
|
m_node = previous;
|
|
select_node(node, additive);
|
|
}
|
|
else if (mode == nodebank_panel::COPY)
|
|
{
|
|
if (node && typeid(*node) == typeid(TAnimModel))
|
|
{
|
|
std::string as_text;
|
|
node->export_as_text(as_text);
|
|
ui()->add_node_template(as_text);
|
|
}
|
|
|
|
m_dragging = false;
|
|
}
|
|
else if (mode == nodebank_panel::ADD)
|
|
{
|
|
const std::string *src = ui()->get_active_node_template();
|
|
if (!src)
|
|
return;
|
|
|
|
if (src->starts_with(editor_includes::directive_mark))
|
|
{
|
|
// a scenery template rather than a single node
|
|
place_include(src->substr(editor_includes::directive_mark.size()), rotation_mode, fixed_rotation_value);
|
|
return;
|
|
}
|
|
|
|
std::string name = "editor_";
|
|
glm::dvec3 mouseOffset = clamp_mouse_offset_to_max(GfxRenderer->Mouse_Position());
|
|
TAnimModel *cloned = simulation::State.create_model(*src, name, placement_on_ground(Camera.Pos + mouseOffset));
|
|
if (!cloned)
|
|
return;
|
|
|
|
std::string new_name = "editor_" + cloned->uuid.to_string();
|
|
cloned->m_name = new_name;
|
|
apply_rotation_for_new_node(cloned, rotation_mode, fixed_rotation_value);
|
|
|
|
// record addition for undo (after rotation, so a redo recreates the same thing)
|
|
std::string as_text;
|
|
cloned->export_as_text(as_text);
|
|
push_snapshot(cloned, EditorSnapshot::Action::Add, as_text);
|
|
|
|
m_node = cloned;
|
|
ui()->set_node(m_node);
|
|
}
|
|
});
|
|
|
|
m_dragging = true;
|
|
m_takesnapshot = true;
|
|
}
|
|
else
|
|
{
|
|
if (is_release(Action))
|
|
{
|
|
mouseHold = false;
|
|
finish_track_box();
|
|
point_drag_finish();
|
|
m_handle_drag = {};
|
|
sweep_release();
|
|
if (m_straights.tool_mouse)
|
|
finish_straight_gesture();
|
|
if (m_extend.active)
|
|
finish_extend();
|
|
if (m_switch.placing)
|
|
{
|
|
// a press let go with no drag places no switch: the track it took is only selected, the ground with no track there
|
|
// selects nothing
|
|
auto const &io{ImGui::GetIO()};
|
|
if (glm::length(glm::vec2{io.MousePos.x, io.MousePos.y} - m_switch.pressed_at) <= 10.0f)
|
|
{
|
|
m_switch.placing = false;
|
|
if (m_switch.free)
|
|
{
|
|
m_switch.free = false;
|
|
track_click_select(nullptr);
|
|
}
|
|
}
|
|
else
|
|
finish_switch_placement();
|
|
}
|
|
if (m_turntable.placing)
|
|
turntable_finish_placement();
|
|
if (m_signal.placing || m_signal.moving)
|
|
signal_release();
|
|
if (m_switch.slide.active)
|
|
switch_slide_finish();
|
|
}
|
|
|
|
m_dragging = false;
|
|
}
|
|
}
|
|
else if (Button == GLFW_MOUSE_BUTTON_RIGHT)
|
|
{
|
|
// Ctrl+RMB: the menu at the cursor, for the model under it or the selection; RMB alone turns the camera
|
|
if ((Mods & GLFW_MOD_CONTROL) != 0 && ui()->mode() != nodebank_panel::TRACK)
|
|
{
|
|
if (is_press(Action))
|
|
{
|
|
m_contextpoint = cursor_ground();
|
|
GfxRenderer->Pick_Node_Callback([this](scene::basic_node *node) {
|
|
if (!viewport_click())
|
|
return;
|
|
auto const selection{selected_nodes()};
|
|
if (node != nullptr && false == node->from_template() && scene::Layers.editable(node) && std::find(selection.begin(), selection.end(), node) == selection.end())
|
|
select_node(node, false);
|
|
m_contextopen = true;
|
|
});
|
|
}
|
|
return;
|
|
}
|
|
if (ui()->mode() == nodebank_panel::TRACK)
|
|
{
|
|
if (is_press(Action))
|
|
track_context_press();
|
|
else if (is_release(Action))
|
|
track_context_release();
|
|
}
|
|
// game-engine style look: hide & grab the cursor while flying, restore it on release
|
|
Application.set_cursor(is_press(Action) ? GLFW_CURSOR_DISABLED : GLFW_CURSOR_NORMAL);
|
|
}
|
|
else if (Button == GLFW_MOUSE_BUTTON_MIDDLE)
|
|
{
|
|
if (is_press(Action))
|
|
{
|
|
m_ortho_pan = true;
|
|
m_ortho_pan_cursor = m_input.mouse.position();
|
|
m_focus_active = false;
|
|
Camera.Velocity = {};
|
|
// in the perspective view the ground under the cursor goes along with it: metres of it to a pixel there, as far as it is
|
|
m_pan_metres = 0.0;
|
|
if (false == Global.EditorOrtho)
|
|
{
|
|
auto const &io{ImGui::GetIO()};
|
|
auto const distance{glm::length(GfxRenderer->Mouse_Position())};
|
|
if (GfxRenderer->Mouse_Hit() && io.DisplaySize.y > 0.0f && distance > 0.5 && distance < 20000.0)
|
|
m_pan_metres = 2.0 * distance * std::tan(glm::radians(Global.FieldOfView / Global.ZoomFactor) * 0.5) / static_cast<double>(io.DisplaySize.y);
|
|
else
|
|
m_ortho_pan = false; // nothing under the cursor to hold
|
|
}
|
|
}
|
|
else if (is_release(Action))
|
|
ortho_pan_stop();
|
|
}
|
|
|
|
m_input.mouse.button(Button, Action);
|
|
}
|
|
|
|
void editor_mode::render_change_history(){
|
|
|
|
|
|
ImGui::Begin((std::string(STR_C("Change History")) + "###editorhistory").c_str(), &m_change_history);
|
|
int maxsize = m_max_history_size;
|
|
if (ImGui::InputInt(STR_C("Max history size"), &maxsize))
|
|
{
|
|
m_max_history_size = std::max(1, maxsize);
|
|
if ((int)m_history.size() > m_max_history_size && m_max_history_size >= 0)
|
|
{
|
|
auto remove_count = (int)m_history.size() - m_max_history_size;
|
|
m_history.erase(m_history.begin(), m_history.begin() + remove_count);
|
|
// adjust selected index
|
|
if (m_selected_history_idx >= (int)m_history.size())
|
|
m_selected_history_idx = (int)m_history.size() - 1;
|
|
}
|
|
|
|
}
|
|
|
|
float dist = kMaxPlacementDistance;
|
|
if (ImGui::InputFloat(STR_C("Max placement distance"), &dist))
|
|
{
|
|
kMaxPlacementDistance = std::max(0.0f, dist);
|
|
}
|
|
|
|
ImGui::Separator();
|
|
|
|
ImGui::Text(STR_C("History (newest at end): %zu entries"), m_history.size());
|
|
ImGui::BeginChild("history_list", ImVec2(400, 200), true);
|
|
for (int i = 0; i < (int)m_history.size(); ++i)
|
|
{
|
|
auto &s = m_history[i];
|
|
char buf[256];
|
|
std::snprintf(buf, sizeof(buf), "%3d: %s %s pos=(%.1f,%.1f,%.1f)", i,
|
|
s.action == EditorSnapshot::Action::Add ? "ADD" :
|
|
s.action == EditorSnapshot::Action::Delete ? "DEL" :
|
|
s.action == EditorSnapshot::Action::Move ? "MOV" :
|
|
s.action == EditorSnapshot::Action::Rotate ? "ROT" :
|
|
s.action == EditorSnapshot::Action::Scale ? "SCA" :
|
|
s.action == EditorSnapshot::Action::TrackEdit ? "TRK" :
|
|
s.action == EditorSnapshot::Action::RoadEdit ? "ROAD" :
|
|
s.action == EditorSnapshot::Action::Array ? "ARR" :
|
|
s.action == EditorSnapshot::Action::Terrain ? "TER" :
|
|
s.action == EditorSnapshot::Action::Kilometrage ? "KM" : "OTH",
|
|
s.node_name.empty() ? STR_C("(no name)") : s.node_name.c_str(),
|
|
s.position.x, s.position.y, s.position.z);
|
|
|
|
if (ImGui::Selectable(buf, m_selected_history_idx == i))
|
|
m_selected_history_idx = i;
|
|
}
|
|
ImGui::EndChild();
|
|
|
|
ImGui::Separator();
|
|
if (ImGui::Button(STR_C("Clear History")))
|
|
{
|
|
m_history.clear();
|
|
g_redo.clear();
|
|
m_selected_history_idx = -1;
|
|
}
|
|
ImGui::SameLine();
|
|
|
|
ImGui::SameLine();
|
|
if (ImGui::Button(STR_C("Undo back to the selected")))
|
|
{
|
|
if (m_selected_history_idx >= 0 && m_selected_history_idx < (int)m_history.size())
|
|
{
|
|
int target = m_selected_history_idx;
|
|
int undoCount = (int)m_history.size() - 1 - target;
|
|
for (int k = 0; k < undoCount; ++k)
|
|
undo_last();
|
|
m_selected_history_idx = -1;
|
|
}
|
|
}
|
|
|
|
ImGui::End();
|
|
}
|
|
|
|
|
|
void editor_mode::on_event_poll()
|
|
{
|
|
m_selftest.input.deliver();
|
|
// game-engine style camera: WSAD/EQ only fly the camera while the right mouse button is held.
|
|
// when it's released the keyboard is free for gizmo shortcuts, and we flush a zero-movement
|
|
// command once so the camera doesn't keep coasting on the last velocity it was given.
|
|
bool const flying = m_input.mouse.button(GLFW_MOUSE_BUTTON_RIGHT) == GLFW_PRESS;
|
|
if (flying)
|
|
{
|
|
// riding along the track the camera only looks around, the keys drive the ride
|
|
if (false == m_ride.active())
|
|
m_input.poll();
|
|
first_step_done(first_step::look);
|
|
}
|
|
else if (m_camera_flying)
|
|
{
|
|
m_camera_relay.post(user_command::movehorizontal, 0.0, 0.0, GLFW_PRESS, 0);
|
|
m_camera_relay.post(user_command::movevertical, 0.0, 0.0, GLFW_PRESS, 0);
|
|
}
|
|
m_camera_flying = flying;
|
|
}
|
|
|
|
bool editor_mode::is_command_processor() const
|
|
{
|
|
return false;
|
|
}
|
|
|
|
bool editor_mode::focus_active()
|
|
{
|
|
return m_focus_active;
|
|
}
|
|
|
|
void editor_mode::set_focus_active(bool isActive)
|
|
{
|
|
m_focus_active = isActive;
|
|
}
|
|
|
|
void editor_mode::starter_trainset(std::vector<std::string> &Trailing)
|
|
{
|
|
static std::regex const trainset{R"((^|\n)[ \t]*trainset[ \t])", std::regex::icase};
|
|
for (std::size_t handle = 1; handle <= scene::Layers.size(); ++handle)
|
|
{
|
|
auto const &layer{scene::Layers.layer(static_cast<scene::layer_handle>(handle))};
|
|
if (layer.created)
|
|
continue;
|
|
std::ifstream input{Global.asCurrentSceneryPath + layer.name, std::ios_base::binary};
|
|
std::string const content{std::istreambuf_iterator<char>(input), std::istreambuf_iterator<char>()};
|
|
if (std::regex_search(content, trainset))
|
|
return;
|
|
}
|
|
std::error_code error;
|
|
if (false == std::filesystem::exists("dynamic/pkp/wmb10_v1/wmb10.mmd", error))
|
|
return;
|
|
for (auto const *track : simulation::Paths.sequence())
|
|
{
|
|
if (track == nullptr || track->m_editorremoved || track->eType != tt_Normal || (track->iCategoryFlag & 1) == 0 || track->name().empty() || track->m_paths.empty())
|
|
continue;
|
|
auto const length{geometry::bezier{track->m_paths.front()}.plan_length()};
|
|
if (length < 15.0)
|
|
continue;
|
|
Trailing.push_back("trainset none " + track->name() + " " + to_string(std::min(length, 0.5 * length + 5.0), 2) + " 0");
|
|
Trailing.push_back("node -1 0 wmb10-6457 dynamic pkp/wmb10_v1 wmb10-6457 wmb10 0 headdriver 0 0 enddynamic");
|
|
Trailing.push_back("endtrainset");
|
|
WriteLog("Editor: the scenery has no trainset, a WMB10 is put on " + track->name() + " to drive");
|
|
return;
|
|
}
|
|
}
|
|
|
|
void editor_mode::render_top_tracks_choice(bool const Combo)
|
|
{
|
|
static char const *const labels[]{"Whole", "Without ballast", "Rails only"};
|
|
static char const *const tooltips[]{"The tracks as in the 3D view", "The rails and the sleepers, the ground under them shows", "The rails alone, without the sleepers and the timbers of the switches, as on a plan"};
|
|
auto chosen{std::clamp(Global.EditorOrthoTracks, 0, 2)};
|
|
auto const pick = [&](int const Choice) {
|
|
Global.EditorOrthoTracks = Choice;
|
|
EditorSettings.top_tracks(Choice);
|
|
EditorSettings.save();
|
|
};
|
|
if (false == Combo)
|
|
{
|
|
for (int choice = 0; choice < 3; ++choice)
|
|
{
|
|
if (ImGui::MenuItem(STR_C(labels[choice]), nullptr, chosen == choice))
|
|
pick(choice);
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C(tooltips[choice]));
|
|
}
|
|
return;
|
|
}
|
|
ImGui::SetNextItemWidth(130.0f);
|
|
if (ImGui::BeginCombo(STR_C("Tracks"), STR_C(labels[chosen])))
|
|
{
|
|
for (int choice = 0; choice < 3; ++choice)
|
|
{
|
|
if (ImGui::Selectable(STR_C(labels[choice]), chosen == choice))
|
|
pick(choice);
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C(tooltips[choice]));
|
|
}
|
|
ImGui::EndCombo();
|
|
}
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("How the top view draws the tracks"));
|
|
if (chosen < 2)
|
|
return;
|
|
ImGui::SameLine();
|
|
auto colour{ImGui::ColorConvertU32ToFloat4(EditorSettings.top_rails())};
|
|
if (ImGui::ColorEdit3("##toprails", &colour.x, ImGuiColorEditFlags_NoInputs | ImGuiColorEditFlags_NoLabel))
|
|
{
|
|
EditorSettings.top_rails(ImGui::ColorConvertFloat4ToU32(ImVec4(colour.x, colour.y, colour.z, 1.0f)));
|
|
EditorSettings.save();
|
|
}
|
|
if (ImGui::IsItemHovered())
|
|
ImGui::SetTooltip("%s", STR_C("The colour of the rails, to stand out on the imagery and the map"));
|
|
}
|