odometer::reading moves to vehicle/odometerreading.h, the store with its files stays in vehicle/odometer.h, so the
physics header doesn't pull in the filesystem and the streams
every vehicle which ran got a line in the store, the wagons of the AI's trains in every scenario too. the store
records a vehicle with a driver's brake valve (BrakeHandle in the .fiz), which can show its odometer; the locomotives
and units the AI runs before a player's cab loads them still get in with their replaceable made up states. the
states already in the file stay as they are
dizel_Momentum() relayed MainSwitch 0 to the consist every frame while the engine stood still, whatever stopped it. In a train with mixed JointEngineStart flags an engine stopped from mainb_off stopped the engines behind it once it spun down, and the stopped engine of the cab's vehicle knocked out the one started from mainb_on. The stop is now relayed only when the engine stalls while running, as on master an engine stalling in a joint start still stops the others.
The three-state door closure lamp is switched on by DoorClosureSignal=Yes in the
Doors: section of the .fiz of the vehicle whose cab shows the lamp (the occupied
vehicle), off by default: without it the lamp keeps showing the lock of the
vehicle's own doors. The eu07.ini switch doorclosuresignal is gone, the data
decides. Sets whose cars lack DoorNeedPermit would blink at every standstill, so
only the sets with permits get the key.
Review of #275. The shunt mode suspends the vigilance device (CA) only on the
vehicles whose .fiz sets the new Security key AwareOffInShuntMode=Yes (default
No), instead of on every diesel-electric with ShuntMode=1 (SP42, SU42 and the
401Z generator car had it too). Suspended, the CA counts no time towards a new
alarm, but an alarm already on stays, goes on to the emergency braking and
needs the usual acknowledgement, instead of going out with the shunt mode.
The emergency position of the master controller vented the brake pipe from
every vehicle whose controller stood there, and "MainCtrl" reached the coupled
vehicles raw, so an Elf with EIMCtrlMainEmergency and one without it disagreed
by one notch (the full braking of one was the emergency brake of the other,
neutral of one a power position of the other). The pipe is now vented only
from the vehicle driven from (IsCabMaster()), and the position goes to the
coupled vehicles in the positions without the key (MainCtrlPosForCoupled(),
the emergency one as the full braking), each adding its own shift on receiving
it (MainCtrlPosFromCoupled()).
The loader's fix-up for the old MCPN=4 raises DirChangeMaxPos by the same
shift, so the reverser keeps working at the new neutral.
- §19.9 cut-outs only when the AI runs the consist as a train (Obey_train); in shunting a wagon without G brakes on P,
which also puts back a brake the inspector cut out before
- no new cut-out while the consist moves: left to the next inspection at a standstill (putting back still happens)
- ESt4R, LSt and EStED test the bit of R, so R+Mg keeps the high-speed stage of R as on the KE and Oerlikon valves
- initialise the cooling power read from the .fiz to its default, no division by an indeterminate value
- integer step counters in the engine start tests
- main_sw opening the consist turns the two-state mainb_sw / mainc_sw off too, left on they'd start the engines again
- the doc comment of MainCircuitOpensWithStarterOnly() back on it; the .fiz read is the controlled vehicle's
- tests: REQUIRE the brake handle before dereferencing it (Sonar cpp:S2259)
- TESt::FillBrakeRes is const (S5817)
- cab EP brake command: drop the mvControlled->EpFuse check, SwitchEPBrake
already checks the cab car's (mvOccupied) EP fuse with the control supply
- AI: with the handle already at the EP brake position, switch the EP brake
on again once the control supply is back
Cw-1 §19.9: in a freight train braked on G, the brake of a vehicle that has
no G setting (e.g. a passenger car with P and R) is cut out. The inspector
put such wagons on P; now it cuts their brake out the way the scenery's '0'
flag does (b_dmg, the distributor's reservoirs emptied), so the brake
releases and stays off.
- The vehicle remembers the inspector cut it out
(TMoverParameters::BrakeCutOutByInspector); the next inspection puts such
a brake back and sets it to what the new train needs. A brake cut out for
any other reason (scenery, player, damage) is never put back; the cab's
cut-out toggle hands an inspector's cut-out over to the player.
- Locomotives and the vehicle the train is driven from keep a working
brake (on P). In the long locomotive setting (§19.3b) the train runs on
P, so a wagon without G stays on P there.
- The braking tables after the settings leave cut-out brakes out.
- §18.3: a car with R whose brake is cut out counts as one on P.
- ai.brakesetting.cw1 no keeps the earlier behaviour: nothing cut out.
The choice and the cutting out stay in vehicle/brakesetting.{h,cpp}, with
unit tests on real wagons.
With ScndCtrlResistiveLock=Yes the shunt controller can't be moved down
either while the master controller is at zero or on a resistive position
(eu07/maszyna#402: "inc/dec").
So that a shunt step can't be left stuck there, the shunt controller drops
to 0 whenever the master controller is at zero or on a resistive position:
right after IncMainCtrl()/DecMainCtrl() move it there (before the
positions go down the consist) and in every update, for the master
controller set directly (AI clamp, consist). Electrically nothing changes,
the relays already drop the shunting on resistive positions. Reducing
power is never blocked: the EP09/ET21 master controller turns back with
the shunt on, the ET22 keeps its interlock (shunt off first), and on the
ET22 a shunt left on at a resistive position would otherwise lock both
controllers.
Tests: the shunt goes down on resistance-free positions only; the master
controller taken back or up onto a resistive position from a shunt step,
by hand and directly, on the ET22 and EP09.
Without SmokeDelay in its Engine section a diesel smokes as soon as the
starter turns, as before; the delay is set per locomotive in its own .fiz.
The value stays a member of the vehicle's mover, read from its .fiz with
an explicit default of 0.
Tests: the real SM42 and ST44 with SmokeDelay=2 and 5 in the .fiz, and
without it (smoke at once), next to a locomotive with a delay loaded
just before, which keeps its own value.
In vehicles like the ST43, the SP32 or the SN61 every engine of a train in
multiple has its own start and stop buttons in the cab. Until now the cab's
line breaker / engine start switch (main_sw, main_on_bt, main_off_bt) always
started and stopped the engines of all the vehicles under its control.
- .fiz, Engine: JointEngineStart=Yes|No (default Yes, as before). With No
the cab's main_* work the cab's own vehicle only, and an engine stopping on
its own (stalled, out of fuel) stops only its own vehicle instead of every
engine in the train.
- .mmd: mainb_sw, mainb_on_bt, mainb_off_bt work the second vehicle with an
engine under the cab's control, mainc_sw, mainc_on_bt, mainc_off_bt the
third one. They count along the control cable from the cab's vehicle,
behind the cab first. Like main_*, the start switch has to be held for the
vehicle's IniCDelay with the vehicle ready (MainSwitchCheck); an impulse
switch of an electric locomotive with series motors closes on release.
- New commands, added at the end of the command list: linebreakertoggleb,
linebreakeropenb, linebreakercloseb, linebreakertogglec, linebreakeropenc,
linebreakerclosec. No default keys.
- The logic is in vehicle/enginestart.{h,cpp} (core library), tested in
tests/unit/test_engine_start.cpp.
Nothing changes for existing vehicles: the new key and the new cab controls
are optional, and without them the code does what it did before.
Game data (SVN, not changed here, to be done separately; the code works
without it): for the SN61 (dynamic/pkp/sn61_v2), whose cab models already
have the buttons start02/stop02/start03/stop03,
- sn61.fiz, sn61-86.fiz, sn61_v1.fiz and the other SN61 .fiz: add
JointEngineStart=No to the Engine: line;
- sn61.mmd.inc (and the other SN61 includes): after main_on_bt add
mainb_off_bt: { stop02 mov -0.005 0 0.1 ... }
mainb_on_bt: { start02 mov -0.005 0 0.1 ... }
mainc_off_bt: { stop03 mov -0.005 0 0.1 ... }
mainc_on_bt: { start03 mov -0.005 0 0.1 ... }
with the sounds of main_off_bt / main_on_bt.
The tooltips "line breaker B" / "line breaker C" are new strings for lang/*.po.
eu07/maszyna#87: the EP2 (and EP1) valve charged its auxiliary reservoir only
from the main reservoir pipe. A dead EN57 hauled by a locomotive coupled with
the hook and the brake hose alone ("3") never charged it, its control
reservoir stopped at about 2.5 bar and the unit didn't brake. The valve now
refills the auxiliary reservoir from the brake pipe through the slide valve's
check valve, as every ESt does (TESt::FillBrakeRes, shared with TESt::GetPF,
which stays bit for bit the same). With the main reservoir pipe charged the
auxiliary reservoir stays above the brake pipe and nothing changes; the
reservoir now also takes air from the brake pipe while it is below it, e.g.
at start-up before the compressor has charged the main reservoir pipe.
eu07/maszyna#134: the EP brake of the Knorr St113 handle (EN57-001) worked
with the reverser in neutral, the battery off or the EP fuse switched off
(Ctrl+Z). It now needs the control powered, as the Oerlikon handle's does
(EPBrakeControlPowered: battery, reverser out of neutral, EP fuse), and an
EP brake switched on drops out (holding the cylinder pressure) when the
control loses power. The positions of the EP release and brake were already
moved by 810b7ad07; a test pins them.
No change to game data needed.
The door closure signalling lamp (i-door_blocked) showed only Doors.is_locked
of the occupied vehicle, so a door open in another car or a coupled unit
didn't show on it.
TMoverParameters::door_closure() gives the state of one vehicle (none, locked,
released, open), the driver gathers the most severe one of the train in
determine_consist_state(), next to IsAnyDoorOpen, and the lamp is lit for
locked doors, blinks for closed but released ones (a permit given, or no lock
engaged on doors that need no permit) and is dark with a door open.
doorclosuresignal in eu07.ini (default yes) switches it; with no the lamp
shows is_locked of the occupied vehicle as before. No data change needed.
modernDimmerPosition indexed dimPositions without a range check in
RaLightsSet(), SetLightDimmings() and the off_from_dimmer value of the
cab's Python state. An empty DimmerList, or a DefaultPos past the end of
a short one, read past the end of the vector; the dimmer commands could
also leave or put the position outside the list.
Reads go through currentDimPosition(), a plain entry (not off, not
dimmed) outside the list. DefaultPos and the position are clamped after
the .fiz is loaded, the increase/decrease commands step through
stepDimmerPosition(), which clamps and does nothing for an empty list,
and headlightsdimenable clamps its position 1.
An optional third column in the LightsList rows of the .fiz sets the cab
interior light when the driver moves the light preset selector to that
position: 0 off, 1 on, 3 on dimmed (bit 2 the dimmer). Rows without the
column, or with a negative value, leave the cab light to its own switch,
so the existing tables work as before; a stray note after the two light
columns (e.g. "38 38 / A") is not read as the flag.
The light follows the occupied cab, or all cabs of a JointCabs vehicle,
as with the interior light commands; the dimmer switch is moved along.
The lightsset custom position and the AI leave the cab light alone.
Covered by tests/unit/test_lights_preset_cablight.cpp.
(eu07/maszyna#529)
Every vehicle gets an odometer (TMoverParameters::Odometer) counting along
with the per-session DistCounter, starting from its state saved in
eu07_odometers.txt in the user's settings directory, else from the file a
python screen kept it in (kilometry/<name>_przebieg.txt), else from a state
made up from the vehicle name. The store is saved every minute of
simulation time and on closing.
The cab's distcounter: gauge shows the odometer; its .mmd offset seeds a
vehicle with no known state. Python screens get it as
state["odometer_total"]; state["odometer"] stays the session distance the
logbook and mirror scripts count differences of.
No change in what the AI or the distributor does:
- S134: the step of the train brake sized from the consist brake table
moves out of IncBrake() into increase_train_brake(), with early returns.
- S134, S1066: while starting uphill, the check of the released brakes
leaves Ready as it was by assigning the flag instead of nesting an if.
- S6004: the uphill condition of control_uphill_start(), and the target
cylinder pressure of TNESt3::CheckState(), are declared in the
init-statement of their if.
- S5350: the loop summing the tractive force walks the consist through a
pointer to const.
- S3776: the cylinder nozzle calibration for the AL2 relay moves out of
TNESt3::SetSize() into ScaleNozzlesForAL2().
TMoverParameters::RadioFuse, closed by default, stands for a fuse in the
cabinet, a lever on the desk or the switch on the radio's power supply.
RadioPowered() needs it closed, so with it open the radio's buttons, calls,
messages and the radio-stop stop working; opening it at a standstill resets
the radio-stop as switching the radio off does, and the radio and radio-stop
lamps go out. New commands radiofusetoggle/radiofuseenable/radiofusedisable
(no default keys), cab controls radiofuse_sw: (follows the fuse state),
radiofuseon_sw: and radiofuseoff_sw:, and radio_fuse for the Python screens.
The AI turning the radio back on closes the fuse too.
Existing vehicles don't change: the fuse starts closed and opens only from a
new cab control or a bound key. SVN data, optional: cabs that have such a
fuse or lever get one of the new controls in their .mmd, in the form of
radio_sw: (e.g. "radiofuse_sw: { <submodel> rot 0 0 0 }"); lang/*.po can
translate "radio fuse".
(eu07/maszyna#438)
A new optional key in the AI section of the .fiz, ShuntPantstate= (bits as in
Pantstate: 1 front, 2 rear, 3 both), sets the pantographs the AI driver keeps
up while its order is Shunt or Loose_shunt, moving and standing alike: it
raises those of the setup and lowers the others once one of the setup
collects the voltage, and doesn't raise more when idling. Lowering on the
track's demand still comes first. Without the key (default 0) nothing
changes, so an ET41 no longer has to shunt on all four pantographs once its
.fiz says so.
SVN data, optional: add "AI: ShuntPantstate=<1|2|3>" to the .fiz of vehicles
that should shunt on fewer pantographs, e.g. dynamic/pkp/et41_v2/203e-a.fiz,
203e-b.fiz and their _dsa150 variants (no AI line there yet). Without it the
vehicles behave as before.
(eu07/maszyna#461)