mirror of
https://github.com/MaSzyna-EU07/maszyna.git
synced 2026-11-19 23:55:00 +01:00
7547e6bf07072eb74b842f06643b9da3a8ecdec1
53 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
03a3b4c09a |
feat(physicslog): the logs written every two seconds by a thread of their own, no file kept open; the black box's tapes as it goes
"physicslog yes" kept the .dat of every vehicle with a driver open for the whole run and flushed it twenty times a second from the simulation's thread: some 580 open files on Tomaszewo. The lines are kept now and a thread of their own writes them every two seconds, each file opened only for the moment it is written to. The files, their lines and their text mode stay as they were. - The black box, with the physics logs off, writes the tapes of the user's vehicles through the same writer as it goes, not at the end. A log begins when the user is first in the vehicle and goes on while the user looks around outside, until another vehicle is taken; back in it, the log goes on after the gap. The vehicle's own driver keeps the log only if it is the primary one, as a passive one's clock stands still; otherwise the driver of its train does. - What is kept is written when the simulator closes, after the black box, at the end of a test run, and when the test watchdog ends a run. A crash loses the last two seconds. - On Tomaszewo with the black box alone, the one tape grows every two seconds. With "physicslog yes", the 581 logs grow and the simulator holds as many handles as without them; writing them takes the thread about 1.9 s, which the closing waits for once. |
||
|
|
e6fa206e47 |
Split stack 3-5c into master (switch blades, 3D sleepers, editor core, SRK stations, tutorial) (#289)
* feat(track): the rail code split by concern, the blades of the switches with the key frogs shaped from their templates The rails are laid by code of their own instead of inside Track.cpp: gauge lines (GaugeLine), knot lines (Knots.h), crossings and check rails (RailCrossings), rail materials (RailMaterials), measuring the rail profile (RailProfile), planning the cuts (RailPlan), the carving scan (RailCarve) and laying the geometry (RailLayer). A switch with the key frogs draws its blades from the tip where their planed nose ends to the heel, bent as they're thrown, and the rail behind them from the heel on, where they were laid from the start of the switch before; on a switch of the catalogue they start at the cut tip of the tables, 1.248 m from the joint at R 190, 1.5 m at R 300 (track_features::blades). The frogs cut from the rails, the wing and the check rails are built but switched off (track_features::crossings), the rails laid whole as before. The switches without the key keep the blades they had. A switch path can be a chain of pieces: pieces1 and pieces2 keep the parts of each path after the classic bezier, which stays as the approximation older versions read. A path with its radius given is a curve however gently it bends, a plain track a straight only where both of its control vectors lie along it. A vehicle trailing through a switch with a movable nose set the other way runs off the rails at it (TRAILED_SWITCH). * feat(render): the shared treads of the rails and their cut faces drawn, the cut faces in the matte variants of the rail materials Both renderers draw the treads a track shares with the rails it crosses, in the pick pass too, and a pass of their own for the faces where the rails are cut, the ends of the blades among them, in the matte variants of the rail materials, so the cut faces don't shine like the head the wheels polish. * feat(vehicle): an axle on a switch keeps to the path it came on, and coming from the frog end trails the switch through where the wheels reach the blades The switch thrown under an axle no longer moves it over onto the other path; it runs on along the one it entered. Coming from the frog end, where the blades are shaped or the frog has a movable nose, the switch set the other way is trailed through (rozprucie) only where the wheels get to the blades or to the nose, not as the axle enters the track; the other switches are trailed through as it enters, as before. * fix(track): the tracks drawn straight before, which their second control vector bends now, written to the log The simulator told a straight by the first control vector of a path alone, so a track whose second control vector bent it was drawn straight; now it's a curve. Such a track is named in the log as it loads, so a scenery made counting on the straight can be found: 25 tracks of lk357. Paths with both control vectors along them bend a centimetre or so at most and aren't named. * feat(track): 3D sleepers and switch timbers laid where the simulator makes the ballast, switched off in the build The sleepers of a track running alone are laid square to it, the timbers of the switches and crossings across the tracks running over them, shared by them, of the models set with sleepers3d and sleepers3dplain in eu07.ini; sleepers3dbed tells whether the ballast is laid under them too, lowered so they stick out of it. The layout of a cluster of tracks is worked out once and kept till a track of it changes, in a thread of its own while the simulation runs. timbermodel of a track, read and written back before, takes the place of the model of sleepers3d there. All of it is off whatever eu07.ini sets (track_features::sleepers), the tracks keeping their ballast and their sleeper models. * feat(render): the 3D sleepers and switch timbers drawn in instanced batches Render_Timbers lays the beams of the tracks in range where they're out of date and draws those of a run of tracks of a cell gathered by the model and its part or its level of detail, in as few instanced batches as they fit in; in the shadow pass only those near the camera. A track with them leaves its old sleeper model out. OpenGL 3.3 renderer only. * fix(track): the counts of what's wrong with the sleepers kept safe from the thread laying them, and that thread stopped before what it works with goes The counts of the beams clipped, dropped and off the plane, of the slowest and the biggest cluster, are counted by the thread working out the layouts in the background as well as by the simulation laying a cluster itself, and were plain values written by both; they're atomic now. What the thread keeps the clusters in, their version and the counts were made after the worker, as it first asked for them, and so destroyed before it at the exit while its thread could still be laying a cluster; they're made first now, the worker stopping and joining its thread before they go. The tracks go with the paths of the simulation, made before the worker. * revert(track): a tributary and a track of an unknown type load as before They came in with the rail code from the guards of the editor against crashing, and don't belong with the blades: a track of an unknown type loaded as a normal track of the railway could be joined to it and run on, and a tributary loaded as a river with its first path lost the second one when the editor saved the scenery. Both load as on master again; the place where the editor crashed on them is to be guarded where it is. * fix(track): the tracks drawn straight before named in the log once, as they load, and the paths of the switches with no radius told a straight as before in one term The log of the tracks the second control vector bends now was written each time the segments of a track were made again, as a track with its unevenness loads and as the editor changes or drags a track; it's written only the first time, as the track loads. The paths of a switch or a crossing with no radius keep the rule of master, a straight told by the first control vector alone, its two terms being the same length; they're one term now, with the comment saying so. * fix(track): the thread laying the sleepers stopped as the application exits, and loading no models itself The thread reads the scenery, which the application deletes as it exits well before the statics go: it's stopped and joined first thing in exit() now, the worker destroyed with the statics only where the application exits some other way, and not started again after. The models the beams are made of were loaded by the thread where it didn't find them, through the renderer, out of the thread of the renderer, into a map read by the simulation meanwhile: they're found under a lock now and loaded only by the threads other than it, again for all the tracks whenever a track changed since, before a layout is asked of it. With the 3D sleepers off in the build their settings aren't exported, and a track changed doesn't look for the tracks around to lay their beams again. * feat(track): the 3D sleepers turned on with sleepers3d in eu07.ini, no longer switched off in the build track_features::sleepers is gone: sleepers3d <model> in eu07.ini lays them, none (the default) lays nothing and the tracks keep their ballast, as before. The sleepers3d settings are written back with the others. The editor changes the tracks, so while it's open their sleepers are worked out on the main thread as they're needed, not in the background. * fix(render): only the part of a timber model drawn, not what else the model holds A timber model of parts may hold more than its begin, main and end, as the kits with the fastenings of the rails do. Those were drawn with each part of each timber, in the middle of the track; they aren't laid, so they're skipped now. * fix(track): the 3D sleepers laid only for a renderer which draws them Only the OpenGL 3.3 renderer draws the beams. With another one a track set to them lost its ballast to them, lowered or not laid at all with sleepers3dbed no, and nothing was drawn in its place. Draws_Timbers() of the renderer tells now, and where it's false the tracks keep their ballast, as with sleepers3d none. * fix(render): the submodels of a timber model left as they were after its parts are drawn They were all made visible after a part was drawn, the ones the model hides itself too, like Light_On, while the same model may stand in the scenery. The submodels of the top level besides the parts are listed as the model is loaded, hidden while a part is drawn and given back their own visibility after. The parts have to be at the top level of the model for that; a model with them deeper is logged and drawn whole. Render_Timbers no longer looks the model up under the lock for every run of tracks, the name set is enough there. * fix(render): a vertex whose faces give its texture no direction gets a tangent across its normal, not a NaN one The cut ends of the rails have one spot of the texture on all their corners, so their tangent came out of normalize() as NaN. The normal-mapped shaders then shaded them with a NaN normal: about half of the vertices of the cuts and frogs, and the end faces of the rails. * feat(track): the frogs cut from the rails turned on with frogs in eu07.ini, no longer switched off in the build frogs yes cuts the rails of the plain tracks and of the switches with the key frogs where they cross other rails, into frogs, wing rails and check rails. It's off by default: the rails are laid whole as before, the blades of the switches with the key are shaped still. * refactor(editor): the track mode file split into the files of its tools, the code as it was A pure move, so that the commits after it show what changes in each tool rather than a 4800-line file rewritten. The member functions of editor_mode go to the file the editor of this branch has them in: route, straights, lay, switchplace, switchdrive, switchtool, trackgizmo, and the rest stays in editormodetrack.cpp. The helpers of its anonymous namespace go to editormodetrackshared.h, as they were but inline, in namespace track_mode, which the files use. No line of code changes; the files add only their license, includes and the using line. * feat(editor): the groundwork the tools of the editor share - The tool interface (editortool.h), the gestures of the mouse (editorgestures.h) and what the modes share (editormodeshared.h); the projection, viewport, selection and texture picking taking them up. - Scripted input (scriptedinput): the input of a selftest script fed to the editor as if typed and clicked, the real mouse and keyboard ignored meanwhile; EU07_EDITOR_SELFTEST_HIDDEN draws into a window never shown nor focused. - The ui layers and panels of the editor, its settings, icons and the info of the includes; the layers of the scenery and their saving; the launcher mode. - utilities: user_cache_path (the cache folder of the system for the user) and the helpers of the translations. - stb_image: the gif loader takes the frame two back from the frames it decoded, not from before its buffer. - tools/editor: the scripts making the headers of the drives, the turntables, the editor and its usage. - Unit tests: test_area and the stubs of the editor the tests link. Not built on its own: the tree builds again with the selftests commit, the one before the translation. * feat(editor): the tracks laid along an alignment, to the PKP PLK norms, with their grade line and the ground - The alignment of the laying (editorAlignment, editorAlignmentStore): straights, transition curves and arcs with the cant of the norms for the speed, the radius below the minimum for it a warning; the lay, route and straights tools build on it, the route plan reading the curves going on from the tracks adjoining. - The grade line (editorProfile, the profile and gradeline tools): fitted to the terrain model or edited by hand, the tracks fitted marked in the scenery (//$f), the shared grade lines of nearly parallel tracks (//$n). - The ground under the tracks (editorGroundFollow, trackbed): the terrain drawn to the tracks and restored, the tracks put onto the terrain. - Connections between tracks (editorConnections, the connection and connection curve tools), the track presets, the shape of a track (editorTrackShape), digitizing tracks from the orthophoto, the properties sheet of the tracks (trackprops) and the track ux. - Unit tests: alignment, ground fit, heights, with the data of two fits. Not built on its own: the tree builds again with the selftests commit, the one before the translation. * feat(editor): the switches placed, slid and designed from their templates - The switch templates (editorSwitchStore, the template tool): the catalogue switches and the user's own, kept with the settings; the designer (editorSwitchDesign) with a drawing of the dimensions, a and b typed in with the shape making up the rest, a switch clicked off the orthophoto. - The curve of a switch laid into a curve (editorSwitchCurve), placement on a straight or into a curve, slide along it, crossovers and double slips (switchplace, switchslide), the drives of the switches (switchdrive) and the records of the switches placed (records). - Unit tests: test_switch_curve. Not built on its own: the tree builds again with the selftests commit, the one before the translation. * feat(editor): the tools of the infrastructure beside the tracks The gauge, speed, joints, lineside, parallel tracks, vehicles, signals, turntables, sweep and road tools with headers of their own; the kilometrage of the lines (editorKilometrage, the km tool); the infrastructure, roads and speeds behind them (editorInfra, editorRoad, editorSpeed). Not built on its own: the tree builds again with the selftests commit, the one before the translation. * feat(editor): the terrain model of geoportal.gov.pl and the orthophoto downloaded for the editor - editorNmt: the squares of the terrain model at 1 m (NMT GRID1, the WCS service of geoportal.gov.pl) fetched by two workers, kept in editor/cache/nmt/grid1 of the game folder, the heights of the scenery taken from them; the nmt mode loads it along the tracks or around the camera. - editorHttp: the HTTP client of both, WinHTTP on Windows, libcurl elsewhere where it's built with it; without it the caches only. - The orthophoto: its cache moved to the cache folder of the system for the user, the download area a polygon on the topo map (//$a) filled in the background, the 4K imagery, the tiles waiting outlined on the ground. - editorGeoMap: the topo map of the top view; heightmapterrain and the terrain streamer grow the terrain made from the model around the camera. Not built on its own: the tree builds again with the selftests commit, the one before the translation. * feat(launcher): the scenery wizard picks the place of a new scenery on the topo map the editor shares The wizard drops its own map download and decoding for the topo map widget of the editor (editorGeoMap). The place clicked becomes the geographic reference of the new scenery (//$g PUWG1992), and the scenery starts with the orthophoto of the editor on (//$o), lying under it in place. Not built on its own: the tree builds again with the selftests commit, the one before the translation. * feat(editor): the tools wired into the editor mode and the build editor_mode takes the tools of the commits before: its header declares them, editormode.cpp and the track mode drive them, and the renderers draw their overlays (opengl33 and legacy). CMakeLists lists the new sources and adds WITH_EDITOR_SELFTESTS (off by default); the unit tests build the new test files. Not built on its own: the tree builds again with the selftests commit, the one before the translation. * feat(editor): the selftests of the editor split by what they test The scripts of EU07_EDITOR_SELFTEST run the commands of editormodeselftest*.cpp: scene, track, rails, join, switch, signal, sleepers, sweep, terrain, monkey. The code is in every build; only with WITH_EDITOR_SELFTESTS=ON does the editor read the variables and run a script. The selftests of master now need the option too. The tree builds again with this commit. * feat(editor): the Polish texts of the editor, all of them in one update of editor_pl.po * fix(editor): the marks of the editor moved off the letters the starters read, and its lines told by their words The starters read some letters in a scenery file: the Starter the title //$n, the attachments //$f and the old scenery //$a, StarterNG and the launcher of the game the attachments //$f and the title //$n. The editor wrote its download area, shared grade lines and fitted tracks under them, and took every line of those marks as its own: saved, a scenery lost its title and attachments, and the starters showed the lines of the editor as them. - The download area is //$z, the shared grade lines //$w, the fitted tracks //$t. - Their lines and those of //$o are told by their first words, as //$h, //$r and //$k were: //$o only as "on 0" or "on 1", the origin or the settings of older builds after it, so a trainset described as "on ..." isn't taken. - The lines older builds wrote under //$a, //$n and //$f are read only by the words the editor wrote in them, or by its own comment line before them, under the new mark. Each save writes them again with it, also when the editor didn't change them; the lines of the starters stay. * fix(editor): a square of the terrain model cut short isn't read, and the squares are kept in the user's cache The service puts the directory of its GeoTIFF before the pixels, so a file cut short by a write or a fetch broken off was read whole, the pixels missing coming out as heights of 0 m, for good. - The reader (editorGeoTiff.hpp, with unit tests) wants all the strips the rows need, each within the file. - A square is written under a name of its own and renamed. - The squares are kept in the user's cache folder (nmt/grid1), as the orthophoto, since the game folder may not be writable; without one, in the game folder as before. The ones older builds kept there are moved over as each is asked for, a damaged one deleted. - Capabilities that didn't come aren't kept as the fallback name for the session: the next square asks again. * chore(editor): the http client said to serve the terrain model and the topo map too, the gif fix of stb_image marked local - CMake names the orthophoto, the terrain model and the topo map as what goes without libcurl. - The fix of the gif frame two back in stb_image is ours, not upstream's (v2.30 still has the old line): a comment at the line says so, for an update of stb_image to keep it. * fix(editor): the lines moved off the letters of the starters in a merged layer written once, not again with each save A merged layer's text goes into the file of its target on save, and the target is read again; the marked lines of the merged layer were dropped only for the marks the editor had changed. The lines moved to the new letters stayed with their old places, and the next save of the session wrote them into the target once more. - After a save, the marked lines of every merged layer are dropped; those of its target are read again from its file. - The lines of a dead layer aren't written again. - The selftest layermerge merges the layer of one file into another's, as the layers panel does. * feat(editor): the station as the signalling sees it, found from a switch of it, and its schematic editorStation: the switches joined by plain track no longer than 1.5 km, the tracks between them and the lines leading out, 400 m of each beyond the outermost switch; laid out as a schematic along the main track through the station. The track circuits, the signals and their lights, the lengths of the station tracks and the lines to the next stations are worked out from it for the signalling tool. Nothing uses it yet: the signalling tool, wired in the next commit, does. It builds on its own. * feat(editor): the signalling of a station in the Signalling tab, laid out from a switch of it as on the lines of PKP PLK LMB on a switch in the Signalling tab opens its station: the schematic in a window of its own, the name, the code, the line and the km of the station, and the steps of its signalling, each one step of undo: - the switches numbered along the station after its code, bpd_1, the parts of a slip bpd_15a..d; the drives and the objects naming a switch follow it, events written by hand keep the old names; - the tracks cut at the joints of the track circuits, Ie-4, and the circuits named, bpd_iz1, bpd_it1; - the entry, exit and shunting signals placed and named, A, F1, Tm1, from the templates chosen; - the signals of the lines out: the automatic block of three or four aspects, the block sections no shorter than the braking distance, or the semi-automatic one with a warning disc; block boundaries drawn by hand; - the lights each signal needs for its routes, Ie-1 and Ie-4 § 8, its template fitted to them; - the SHP track resonators the signals lack, rezonator.inc; - the lengths of the station tracks as a table, and what the station and its lines still lack, with Repair. The stations described are kept as //$s lines in the files of their layers. * fix(editor): the signals of a station and of its lines not placed with no template for a kind, no track cut for them first - Set the signals and Set the line signals cut the tracks first, and only then found no template for a kind. They stopped there, but the cuts stayed as a step of undo. Now they ask for the templates first, by the lookup signal_batch() uses (signal_template_for(), behind editor_signals::signal_templates_missing()). Without one nothing is cut. - Set the signals and Set the track circuits again under Track lengths had the ids of the buttons of the steps above them. ImGui flagged them when hovered. Each now has an id of its own. * fix(utilities): win1250_to_utf8 turns the polish letters into utf-8, not into themselves utilities.cpp starts with a byte order mark, so the compiler reads it as utf-8. The game's targets don't get /utf-8, though: set_target_properties(... COMPILE_OPTIONS ...) in the MSVC block of CMakeLists.txt replaces the options add_compile_options gave them. So the string literals went into the program in the code page of the system, windows-1250 on a polish one, and the map of win1250_to_utf8 turned each letter into itself. What read windows-1250 through it got no utf-8: the names, descriptions and categories of the sceneries and the names of the textures in the launcher, and the descriptions of the templates in the editor. The editor writes such a description back through utf8_to_win1250, which makes a question mark of each byte that doesn't start a utf-8 sequence, so the letters it had read unchanged didn't come back. The utf-8 sequences are written as bytes now, the way utf8_to_win1250 has them, so they don't depend on the options. The options stay as they are: with /utf-8 other literals of the files with a byte order mark would change, the "±" of the table of Bezogonkow would take two bytes and move the letters after it. The unit tests check the letters and that the text given is valid utf-8. (cherry picked from commit |
||
|
|
9a873b2e18 |
Merge remote-tracking branch 'origin/master' into feat/persistent-odometer-store
# Conflicts: # vehicle/DynObj.h |
||
|
|
b251b6fe42 |
feat(blackbox): a black box of the session: the run, the cab, the signals and the stations to a file (#322)
* feat(blackbox): a recorder of the run, the cab, the signals and the stations to a file With the physics logs on (and the new eu07.ini setting blackbox, on by default), the simulator writes a black box of the session to physicslog/*.blackbox: the scenery map (tracks, signals, W4 stop points with their heading, W6 horn points), the timetables of the user's train, and at 10 Hz the cab of the vehicle the user sits in (speed, controllers, brakes, pressures, lights with the pattern the run asks for, the movement kind), the AI's reference for the same place (target speed, next limit, braking distance), the consist, the cameras and the vehicles around. Changes go in as they happen: switches, signal aspects, commands, signals passed with their aspect, stations stopped at, passed or missed, horn requests, the autopilot switched on or off, couplings and vehicles removed. The driving aid's next speed limit moved from the UI panel to TController::next_speed_limit(), so the panel and the recorder read the same. The format is described in blackbox_doc.md; the writer and the reader of the records have unit tests. * fix(blackbox): the aspect a signal had when passed, the lamps the ends have, vehicles taken off - A passed signal is written with the aspect the train had of it, kept in the speed table, not the one its memory cell shows when the pass is noticed: by then the train itself on the track behind has often set it to stop, and most passes were written as at stop. - The cab record gains the lamps the vehicles at the head and the tail have at their outer ends (136 bytes), so a reader can check the light pattern against them as the driver does (no upper headlight, the auxiliary lamps, the rear-end signals only). - A vehicle taken off the scenery and still pointed at by a coupler or the camera gets no new number; the camera lets go of it. - The timetable written before a station goes under the vehicle the user is in now, not the one of the last look. - The file buffer is given once the file is open: MSVC passed over one given before. - The doc tells the AI fields before the consist is started and when entering a vehicle is a driver change. * fix(blackbox): the stop of an automatic block signal passed is written as a stop The speed table keeps the stop of an automatic block signal (SetVelocity 0 x) as the speed allowed after it, with spStopOnSBL; a pass of it was written as that speed with no flag. It is written as 0 with the flag of an automatic block stop again. * feat(blackbox): the doors, the brakes of the whole train, a diesel's engine and the rest of the cab The cab record grows from 136 to 190 bytes, so that a reader can check everything the driver did: - the doors: the permits on each side, the departure signal, the steps, the door lock and whether the doors are locked; - the brakes: the equalizing reservoir of the driver's valve, the main reservoir pipe, the highest brake cylinder pressure of the train, the hand brake, the releaser, the setting (G/P/R/Mg) and the mode (PS/PN/EP/MED); - what drives the vehicle (electric, induction, diesel, diesel-electric, steam, none), its power, a diesel's oil pressure, water, oil and engine temperatures, overheating, fuel and oil pumps, clutch and torque converter, the motor fans; - the cruise control and its speed, the integrated driving handle of a unit, the radio channel, the horn's tones. New device bits use the upper half of the 32-bit field; the new fields come at the end of the record, so older readers still read it. * fix(blackbox): the driver's valve field is what its gauge shows, the radio channel has no none Handle->GetCP() is the equalizing reservoir of most valves but the time reservoir of the FV4a, empty but after an overcharge: the field is named and documented as what the valve shows. With no driver the radio channel reads as the first one, not 0. --------- Co-authored-by: maj00r <maj00r@host> |
||
| e433b43fef | Script screens: led_post and resize of the Lua screens on the gpu | |||
| c4924f756d | Lua script screens beside the WebAssembly ones | |||
| 18c333b089 | wasm display support | |||
|
|
d53f3cc21a |
Merge remote-tracking branch 'origin/master' into feat/persistent-odometer-store
# Conflicts: # vehicle/Gauge.h |
||
| 7edf23b8ff |
Merge pull request #270 from MaSzyna-EU07/fix/fpslimit-frame-pacing
fpslimit: pace frames in integer clock ticks, show the real frame rate (eu07/maszyna#416) |
|||
|
|
8fb596f218 |
fix(simulation): any exception ends a test run with error, other runs as on master
main() tells a test run (--test) apart before anything runs. Only a test run catches every exception and installs a std::terminate handler, both ending the run with the error code and a test: line; any other run keeps master's exception handling, so on Linux an uncaught runtime_error aborts at the throw site again. A test run doesn't start the Discord RPC thread: it published the test scenery as the player's presence and held the closing up to 5 s. run.py drops a case scenery's .sbt cache after a run cut short (wall_timeout, error, a crash, killed by run.py), which could have been writing it. The -edit branch of the test command line parser had no effect (a token that isn't an option is ignored either way) and is gone; its test checks what can be seen instead. |
||
|
|
03a417c7b0 |
feat(simulation): a real time watchdog ends a test run that hangs
A test run that hung, in the loading or anywhere else, waited until whoever started it killed it. A watchdog thread now ends a run still going test.wall_timeout seconds of real time after the start of the simulator, loading included: it says `test: timeout ... still running after N s of real time` and quits with the timeout code, whatever the main thread is doing, with no dialog. A test that has ended but whose simulator doesn't close ends with its own result. The limit is test.wall_timeout (settings, the scenery's config block) or --test-wall-timeout, which wins. Not given, it is test.timeout + 600 s: ten minutes for the loading, and a simulation that runs at least as fast as real time is never cut short. test.timeout 0 means no watchdog unless the limit is given; test.wall_timeout 0 turns it off. run.py passes the case's timeout as --test-wall-timeout and kills a simulator only 30 s after it. A timeout from the watchdog counts as wall_timeout there, so a run that hung doesn't pass a case expecting the simulation time to run out; test_mode_wall_timeout ends while loading on a limit of 2 s. |
||
|
|
14d25520f3 |
fix(simulation): a test's standard output carries its result only
The log was printed in colour to stdout too (debuglog bit 2), so a script reading the verdict of a test got the whole log with it. In test mode the log goes to the log file only and stdout has the `test: ...` line alone; the usage text of a bad command line goes to stderr. Whether the run is a test is now known before the log service starts. |
||
|
|
1626df2bc4 |
fix(simulation): a scenery's config block can't turn back on what a test keeps off
The config block of a scenery is read like the settings files, after the test mode settings were applied, so a scenery with soundenabled, multiplayer, execonexit, feedbackmode or the like in it got them back in a test run. The test mode settings now are applied again after each config block of the scenery; apply_test_mode_settings() moved to simulationtest.cpp for that. |
||
|
|
7f8892cda6 |
fix(simulation): a test doesn't read the player's own eu07.ini
The simulator reads eu07.ini from %APPDATA%/MaSzyna (~/.config/MaSzyna on Linux) when there is one, in place of the game folder's. A test run then depended on whose machine it ran on. With --test only the game folder's eu07.ini is read, then the files given with -ini. The test mode options are taken from the command line before the settings for that; --test-timeout still wins over test.timeout of any settings file. |
||
|
|
486a714f52 |
refactor(simulation): the rules of the test mode in a file of their own, with unit tests
The command line options of the test mode and the end conditions checked after each frame are now plain functions in simulation/simulationtestrules.cpp, which needs nothing of the running simulation: parse_test_command_line() and evaluate_frame(). The file is part of the core library, so the unit tests check them (tests/unit/test_test_mode.cpp): the --test-timeout value, values of other options not taken for options, a pass that waits for the stop, the standstill, the timeout. test_manager only gathers what a frame brought and acts on the verdict. No change in behaviour. |
||
|
|
93e2b85d08 |
fix(simulation): the test mode gives nothing to the outside and leaves the player's files alone
The test mode turned off what comes in from outside, but a few settings of the user's eu07.ini still reached out of a test run: - feedbackmode: 1 and 2 toggle Caps Lock / Scroll Lock by injecting key events into the whole system, 3 and 4 drive an LPT port or a PoKeys desk (and 4 reads the desk's switches); - multiplayer: events are reported to a multiplayer server, and some events are held back for it; - execonexit: a program is run with system() at the end of each run, which also waits for it; - showsystemconsole: a console of the run's own pops up and stdout is reopened on it, so whoever started the test with a redirected output doesn't get the `test:` line (and a console the run was started from would be hidden without it); - imgui.ini in the game folder was written by every run, and by several at once with run.py -j. All of these are off in test mode. Nothing changes outside it. |
||
|
|
4356e7c3fd |
fix(simulation): a test run that can't start ends with the error code and says why
- `--test` is looked for before the rest of the command line is read. An unknown option before it (e.g. `-s x.scn --test-timout 90 --test`) used to end the run with exit code 0, which a caller reads as a pass. - `--test-timeout` without a value, or with one that isn't a number of seconds, fails the run instead of leaving the default or, through atof, turning the timeout off. - These, a missing -s, a failed start and an exception caught in main() end the test through test_manager::conclude(), which writes the usual `test: error (exit code 5) ... : <reason>` line to stdout and the log. Before, `eu07 --test` alone exited with 5 and nothing anywhere: the error went to the log queue and the process ended before the log thread wrote it. In test mode main() now stops the log thread and waits for it before _Exit(). Outside the test mode nothing changes: conclude() does nothing there. |
||
|
|
6dc42e976f |
feat: keep the vehicle odometers between the sessions (#72)
Every vehicle gets an odometer (TMoverParameters::Odometer) counting along with the per-session DistCounter, starting from its state saved in eu07_odometers.txt in the user's settings directory, else from the file a python screen kept it in (kilometry/<name>_przebieg.txt), else from a state made up from the vehicle name. The store is saved every minute of simulation time and on closing. The cab's distcounter: gauge shows the odometer; its .mmd offset seeds a vehicle with no known state. Python screens get it as state["odometer_total"]; state["odometer"] stays the session distance the logbook and mirror scripts count differences of. |
||
|
|
e8c4f3592e |
fix: fpslimit paced in integer clock ticks, FPS shown counts the wait (eu07/maszyna#416)
The limiter slept off the rest of each frame with sleep_for() given a float duration. MSVC adds that to steady_clock::now() in float nanoseconds, so after a few hours of system uptime the wake-up time is rounded to tens of ms: at 95 h uptime fpslimit 60 had no effect at all and fpslimit 30 gave ~22 fps, in the full and the legacy renderer alike. frame_pacer now schedules frames on a fixed cadence in steady_clock ticks and the loop waits with sleep_until; an overshooting wait is made up in the next frame. The FPS shown and the motion blur use the new mainloop_period stopwatch (frame start to frame start, wait included); the targetfps/fpsaverage draw-range controllers keep reading the work time as before. (eu07/maszyna#416) |
||
|
|
dd019d88ba |
feat(simulation): the test mode takes no input from outside (eu07/maszyna#541)
With --test the gamepad, mouse picking, UART, ZeroMQ and motion telemetry are off, the hidden window gets no key, mouse, scroll or char callbacks, and the window procedure that takes WM_COPYDATA commands from other programs isn't installed, so nothing but the scenery drives a test run. |
||
|
|
441caeed64 |
refactor(simulation): tidy the test mode code
The test manager is reached through simulation::test() instead of a global, the result cell is owned by a unique_ptr until the memory table takes it, the cell value is compared with a margin, strings are built with std::format and the --test settings moved to apply_test_mode_settings(). The driver's signal check is folded into UpdateSpeedPosition(), which updates a speed table entry and reports a signal at stop the head of the train just passed. The test.* keys are listed with the other settings at the start of the log. |
||
|
|
02e29f6971 |
feat(simulation): test mode, --test runs a scenery unattended and exits with the result (eu07/maszyna#541)
eu07 --test -s <scenery> [--test-timeout <s>] runs the scenery in ghostview with
the null renderer (models loaded, no textures), a hidden window, no sound,
network or python, and in fixed steps of 0.03 s of simulation time per frame
(three 10 ms physics steps) as fast as it can. Without -seed it uses a fixed
seed, so two runs give byte-identical physicslogs.
The scenery reports its result to the __test.result memory cell, which the
simulator always creates: value 1 passes once every vehicle has stood still for
1 s, value 0 fails at once. The run ends with exit code
0 pass, 1 fail,
2 a train passed a signal at stop (SetVelocity 0 0, as seen in its driver's
speed table; SetVelocity 0 x on automatic block doesn't count),
3 timeout (test.timeout, default 3600 s of simulation time),
4 standstill (every vehicle still for test.standstill s, default 300, with no
result; a pass with test.pass_on_standstill yes),
5 error (no -s, the scenery didn't load or has no vehicles, an exception).
The test.* keys go in the scenery's config block; test.fail_if_stop_overran no
only logs a signal passed at danger. Outside the test mode a signal passed at
danger is logged.
The null renderer gets a ui backend which draws nothing, hands out the null
texture and material instead of throwing, and ends the ui frame. A GL context
is still made for the hidden window, without asking for a version, as parts
of the ui create textures with gl calls of their own. No crash dialog or
message box in test mode; the window code no longer needs a monitor.
|
||
|
|
798fd89dd0 |
test: scenario tests that run the simulator and check a vehicle's physicslog
tests/scenarios/run.py builds a test scenery from a game install's scenery (own trainsets removed, case fragment added), runs eu07 in ghostview with physicslog on, and checks what the vehicle did: starts, max speed, brakes, stops. First case: EU07 on td.scn driven by AI on the td/rozklad timetable, with the Stacja1 exit route set by an event launcher instead of shift+4. eu07 gets a -ini <file> option: an extra settings file read after eu07.ini, so a test run can switch to a window and turn on physicslog without touching the user's config. Local only: scenery and vehicle data are not in the repo. |
||
|
|
a6778c9fe2 |
refactor: the Sonar remarks on the small fixes taken care of
- the log stops through a flag kept in a function, not a global one - the messages are put together with std::format - a vehicle dropped on a trainset in the launcher goes in once the trainset is drawn, so the vehicles are gone through with a plain loop again; the drop split into a new vehicle and a moved one - the scenario that can't be opened is caught as the runtime error it is, a file name outside of the code page as the system error it is - a track of an unknown type is left out through the pointer owning it - the keyword of a track type written out by a function of its own - the picked node forgotten with ranges::replace_if, the empty Forget_Node of the base renderer told why it is empty - FileCased takes the path it works on |
||
|
|
ed0ff36a69 |
fix(app): a scenario failing as it loads goes back to the launcher too, the files of other cases looked for only off Windows
A scenario failing past its opening popped the loader mode and went on to pop it again and push the driver mode with the scenery half loaded; it goes back to the launcher as one that can't be opened. FileCased() goes through the folder only where the file system tells the case apart: on Windows a missing file was looked for in its whole folder for nothing, and a name outside the code page threw from the parser. The Discord thread sleeps a quarter of a second outside the driver mode, not to hold the closing up. |
||
|
|
b34238f33f |
fix(app): the log written to the end of the closing, each step of it with its time; the Discord thread idle outside the driver mode
The log service stopped with applicationQuitOrder, so whatever was logged while the simulator closed was lost; it now runs until StopLogService() and writes out what came before. The closing logs each of its steps with the time since it began, to tell where a closing that hangs stops. Outside the driver mode the Discord thread spun a core in its loop, it now sleeps a second between the checks. |
||
|
|
04af7d5758 | fix(python): stop python workers before destroying windows on exit | ||
|
|
8125166690 |
Fix/sonar reliability security (#205)
* fix(sonar): addressing reliability/security issues * fix(sonar): addressing reliability/security issues * fix(sonar): addressing reliability/security issues * fix(sonar): addressing last reliability/security issues * fix(sonar): addressing last reliability/security issues * fix(sonar): addressing last reliability/security issues * refactor(sonar): imgui update * refactor(sonar): hasChar revert |
||
| 9935257783 | Add nosonar tags | |||
| 344034ec70 | feat(ui): imgui 1.91.9b-docking in place of 1.73: local changes of the backends carried over (glad as the gl loader, srgb and gamma of the ui, gles glsl string), BufferingBar/Spinner kept, imgui_tables in cmake; cursor position, cursor enter and focus of the main window passed to the glfw backend, which works with events now; code adapted to the api: ImGuiListClipper::Begin, BeginListBox, ImTextureID as an integer, ImageButton with an id, ImGuiKey without GetKeyIndex, logarithmic sliders in place of the removed power argument; ImGuizmo with the math operators defined before imgui.h and SetNextFrameWantCaptureMouse | |||
| 917c8f7285 | Merge branch 'master' into feat/modern-editor | |||
|
|
0a3cd55e59 | feat(launcher): -edit without a scenery opens the wizard of a new scenery: file name, title and centre, picked on the OpenStreetMap map of geoportal.gov.pl in PUWG 1992 or given in degrees; the scenery is written with the centre as its //$g reference and opened in the editor; a bare -edit no longer loads the scenery of eu07.ini | ||
|
|
79bd0c8e91 | fix(sonar): addressing reliability/security issues (#202) | ||
| 73f2f68aa0 | feat(editor): edit session (-edit) and scenery layers | |||
|
|
176427f96b | refactor: sonar c++20 changes (#185) | ||
|
|
4137f5504a | fix: sonar sast fixes - sonar.yml, nosonar, linux chmod modification | ||
|
|
3fa3853018 | fix for sonar | ||
| e7b64c7397 | Merge branch 'random-seed-entropy' of https://github.com/MaSzyna-EU07/maszyna into random-seed-entropy | |||
| 788135cc2d | Improve random engine entropy and clean up random engine initialization | |||
|
|
2945f3f9b2 | use random_device for local generator | ||
|
|
ff3daea78c | seed the random engines from the system pool, not std::random_device | ||
|
|
22361eec1d |
Fix compilation with discord-rpc turned off (#135)
Closes #55 |
||
|
|
c98441d1aa |
Initialize random seed early in the init sequence
Network client will overwrite the seed if necessary. |
||
| d60841944d |
Merge pull request #124 from xwizard/refactor/user-config-path
refactor: extract user_config_path() helper |
|||
|
|
fe603f15eb |
refactor: extract user_config_path() helper
Consolidates platform-specific config-directory logic (APPDATA on Windows,
~/Library/Application Support on macOS, ~/.config on Linux) into a single
user_config_path(filename) function in utilities/utilities.{cpp,h}, removing
copy-pasted #ifdef blocks from application.cpp, editor/editorSettings.cpp,
input/{keyboard,gamepad,drivermouse,uart}input.cpp.
|
||
|
|
d85096f64d | reformat: remove redundant parentheses | ||
|
|
7a32e7e9ab |
Merge pull request #113 from MaSzyna-EU07/refactor-nullptr
refactor: replace null with nullptr |
||
|
|
bf147dd155 | refactor: replace null with nullptr | ||
| 75461eaf86 | World Streaming Part 1 | |||
| bae20a69e8 | Bring back old simulator console as ini option showsystemconsole |