18
0
mirror of https://github.com/MaSzyna-EU07/maszyna.git synced 2026-11-19 12:16:02 +01:00
Commit Graph

142 Commits

Author SHA1 Message Date
7c103b5d2d Merge pull request #268 from MaSzyna-EU07/fix/ws-hold-coil-lever-bistable
Bistable hold coil lever of the line breaker (eu07/maszyna#364)
2026-11-09 12:57:49 +00:00
f61a4ab2e7 Merge pull request #269 from MaSzyna-EU07/fix/diesel-smoke-after-ignition
Diesel exhaust smoke only once the engine fires (eu07/maszyna#523)
2026-11-09 12:57:02 +00:00
889aa2d5db Merge pull request #278 from MaSzyna-EU07/feat/shunt-lock-resistive
Field shunting locked at zero and on resistive positions (eu07/maszyna#402)
2026-11-09 12:53:57 +00:00
4a9ab1447e Merge pull request #279 from MaSzyna-EU07/fix/multiple-unit-electric-diesel
No multiple-unit control between electric and diesel locomotives (eu07/maszyna#520)
2026-11-09 12:53:30 +00:00
0c95dbfa5a Merge pull request #280 from MaSzyna-EU07/feat/radio-fuse
Radio fuse: a cut-off in the radio's power supply (eu07/maszyna#438)
2026-11-09 12:53:14 +00:00
ebc9eb8740 Merge pull request #281 from MaSzyna-EU07/feat/shunt-pantograph-config
AI: suggested pantograph setup for shunting in the .fiz (eu07/maszyna#461)
2026-11-09 12:52:58 +00:00
3710b2e5d6 Merge pull request #284 from MaSzyna-EU07/feat/light-programmer-cab-light
Light programmer: cab light flag per position (eu07/maszyna#529)
2026-11-09 12:51:37 +00:00
fedbf458b5 Merge pull request #285 from MaSzyna-EU07/feat/duplicate-cab-control-submodels
Cab controls with more than one submodel (eu07/maszyna#527)
2026-11-09 12:50:54 +00:00
28337b5f28 Merge pull request #286 from MaSzyna-EU07/fix/dimmer-position-bounds
fix(lights): keep the headlight dimmer position within the DimmerList
2026-11-09 12:50:35 +00:00
c1089a6b16 Merge pull request #292 from MaSzyna-EU07/fix/en57-ep2-brake-charging
EN57 brakes: charging when hauled with the brake hose alone, Knorr EP brake only with control power
2026-11-09 12:48:13 +00:00
cb1dd60630 Merge pull request #293 from MaSzyna-EU07/fix/door-inner-faces-lowpoly-lighting
Door wings: let the low poly interior have its own, moving inside of the doors (eu07/maszyna#512)
2026-11-09 12:47:58 +00:00
jerrrrycho
38202f4e57 Merge remote-tracking branch 'origin/master' into feat/second-loco-engine-start
# Conflicts:
#	CMakeLists.txt
2026-11-08 21:51:59 +01:00
jerrrrycho
c0f1749e87 Merge remote-tracking branch 'origin/master' into fix/door-inner-faces-lowpoly-lighting
# Conflicts:
#	vehicle/DynObj.cpp
2026-11-08 21:47:32 +01:00
jerrrrycho
d50a724bc8 Merge remote-tracking branch 'origin/master' into fix/ws-hold-coil-lever-bistable
# Conflicts:
#	vehicle/Train.cpp
2026-11-08 21:28:09 +01:00
maj00r
9fecba82f0 Merge pull request #291 from MaSzyna-EU07/fix/sod-lamp-whole-consist
SOD lamp: doors of the whole consist, three states (eu07/maszyna#288)
2026-11-08 20:56:20 +01:00
maj00r
17676863bc Merge pull request #266 from MaSzyna-EU07/feat/exe-test-mode
Test mode: `--test` runs a scenery unattended and exits with the result (#541)
2026-11-08 20:41:57 +01:00
jerrrrycho
57db0087ff fix: the SOD lamp of the whole consist is opt-in per vehicle (DoorClosureSignal)
The three-state door closure lamp is switched on by DoorClosureSignal=Yes in the
Doors: section of the .fiz of the vehicle whose cab shows the lamp (the occupied
vehicle), off by default: without it the lamp keeps showing the lock of the
vehicle's own doors. The eu07.ini switch doorclosuresignal is gone, the data
decides. Sets whose cars lack DoorNeedPermit would blink at every standstill, so
only the sets with permits get the key.
2026-11-08 18:30:22 +01:00
jerrrrycho
43fc80f452 fix: radio fuse review: working push buttons, own hint, HUD
- radioon_sw:/radiooff_sw:/radiofuseon_sw:/radiofuseoff_sw: are now loaded
  as push-button gauges in initialize_gauge, so they can be clicked; the
  enable/disable commands press them while held. radiotoggle and
  radiofusetoggle flip the state directly, so they don't move them.
- New driver hint "Close radio fuse" (radiofuseon); "Switch on radio" is
  given only when the radio's own switch is off.
- The HUD shows the radio channel only with the fuse closed.

(eu07/maszyna#438)
2026-11-08 17:52:39 +01:00
jerrrrycho
91e0d90e8d fix: review of the separate engine start switches (eu07/maszyna#80)
- initialise the cooling power read from the .fiz to its default, no division by an indeterminate value
- integer step counters in the engine start tests
- main_sw opening the consist turns the two-state mainb_sw / mainc_sw off too, left on they'd start the engines again
- the doc comment of MainCircuitOpensWithStarterOnly() back on it; the .fiz read is the controlled vehicle's
2026-11-08 17:38:59 +01:00
jerrrrycho
200d3ae73b fix: review of the EN57 EP brake (Sonar null check, EP fuse of the cab car, AI re-asserts the EP brake)
- tests: REQUIRE the brake handle before dereferencing it (Sonar cpp:S2259)
- TESt::FillBrakeRes is const (S5817)
- cab EP brake command: drop the mvControlled->EpFuse check, SwitchEPBrake
  already checks the cab car's (mvOccupied) EP fuse with the control supply
- AI: with the handle already at the EP brake position, switch the EP brake
  on again once the control supply is back
2026-11-08 17:37:56 +01:00
pwarszawski
8cc8158d2a AI: making for a passenger stop, leave room only for the brake's own fill time
Since #187 the braking curve towards a stop or a lower speed leaves room for
the time the brake takes to respond, as long as the train brake handle is
still in the running position. The horizon it takes has the AI's old
look-ahead, (1 - a0) * 30/3.6 s, about 7-8 s, as its floor; at 60 km/h that
is over 100 m, up to half of the braking distance. Stops at signals were
tuned with it. A vehicle that brakes with its independent brake (an SN61, a
light engine) leaves the train brake handle where it is, so it kept that
room the whole way in: it braked early and gently, came down to 10 km/h
some 50 m out and crawled the rest, applying power and the brake in turn.

Making for a passenger stop (the point the train is to stop at, found by the
scan of the route, is a W4), the room now covers only the time the brake
takes to fill (half its application time), without the look-ahead floor.
Stops at signals and anything else keep the room as it was.

When a vehicle ahead is closer than the stop the scan found, the train makes
for that vehicle, so the room is the full one again.
2026-11-08 16:25:12 +01:00
jerrrrycho
22c588d8f9 feat(cab): 401Da oil pump lamp and slotted speedometer lever (eu07/maszyna#546) (#261)
* feat: 401da oil pump lamp and slotted lever animation (eu07/maszyna#546)

i-oilpump lights while the pre-lubrication oil pump works, so it goes
off once the engine runs. animslottedlever: in the .mmd turns a lever
by a pin on the coupling rod sliding in the lever's slot, which the
speedometer drive of 401Da needs.

The compressor start delay of #546 came with CompressorStartDelay
(Brake section) of master.

* fix: force GLM AVX2 only when the compiler targets AVX2

ENABLE_AVX2=OFF left GLM_FORCE_AVX2 defined, so MSVC still emitted
AVX2 intrinsics and the exe crashed on CPUs without AVX2.

* test: cover the compressor start delay and the oil pump lamp

The delay of an engine stopped before it passed starts over, a
compressor switched on by hand waits too, and the key is read from the
Brake section. In the converter-fed set-up of 401Da the compressor
waits for ConverterStartDelay and then its own delay. The oil pump
(i-oilpump lamp) works before the engine start and stops once the
engine runs.
2026-11-08 14:48:42 +01:00
jerrrrycho
5f46aca43a fix: a latching line breaker lever goes off with the breaker knocked out (#277)
The EP05's single two-state line breaker lever stayed on once the converter
overload relay knocked the breaker out: every press of the toggle tried to
close the open breaker, which the tripped relay refused. A press now puts
a lever left on over an open breaker off first.

(eu07/maszyna#394)
2026-11-08 14:48:04 +01:00
pawelw
3487e75f9a AI: the passenger stop flag no longer turns itself on and off (#295)
Whether a train is at a passenger stop (IsAtPassengerStop) was checked against
the final approach margins fMinProximityDist and fMaxProximityDist, which are
themselves set from that flag: 10-15 m and 15-40 m at a stop, 8 m and 50 m
otherwise. With the two sets different, the flag switched on and off on every
other scan of the route on the way to a W4. Each time the train went from a
final approach to a stop 50 m long to one 15 m long and back: braking in one
scan, full power below the 10 km/h coasting speed in the next. Close to the
stop the braking demand did not hold the train to a standstill, and below
1 km/h the stop counted as done, so an SN61 drove off without ever standing
still (#290).

The margins are now worked out in train_proximity_margins(), and the check of
the stop uses the margins of a passenger stop whatever the flag is at the
moment. A vehicle that is not a train keeps the present ones, as before.
2026-11-08 14:40:13 +01:00
jerrrrycho
491ed3e6da Merge remote-tracking branch 'origin/master' into feat/exe-test-mode 2026-11-08 10:58:43 +01:00
jerrrrycho
547706b54d refactor(simulation): fix the Sonar remarks on the test mode code
- TController::TableCheck() calls TSpeedPos::Update() as it did before the
  test mode: the check for a signal passed at danger is a call of its own
  after it (CheckSignalPassedAtDanger), so the update lines nest no deeper
  than on master (S134). A switch is a track, so a signal's update never
  takes the switch-change branch and the check runs in the same place as
  before; the physicslogs of all 15 scenario cases are byte for byte the
  same.
- null_imgui_renderer is final (S1235), to_string(test_result) uses
  `using enum` (S6177), init_result_cell() is const (S5817),
  ConfigParseTest() takes a std::string_view (S6009) and the test settings
  struct is declared apart from its member (S3646).
2026-11-08 09:35:59 +01:00
jerrrrycho
46e0628fbe refactor: keep the coupler side walked along in a local in engine_start::engine() 2026-11-08 07:24:39 +01:00
jerrrrycho
13ded6cdfa feat: separate engine start switches for the vehicles in multiple (eu07/maszyna#80)
In vehicles like the ST43, the SP32 or the SN61 every engine of a train in
multiple has its own start and stop buttons in the cab. Until now the cab's
line breaker / engine start switch (main_sw, main_on_bt, main_off_bt) always
started and stopped the engines of all the vehicles under its control.

- .fiz, Engine: JointEngineStart=Yes|No (default Yes, as before). With No
  the cab's main_* work the cab's own vehicle only, and an engine stopping on
  its own (stalled, out of fuel) stops only its own vehicle instead of every
  engine in the train.
- .mmd: mainb_sw, mainb_on_bt, mainb_off_bt work the second vehicle with an
  engine under the cab's control, mainc_sw, mainc_on_bt, mainc_off_bt the
  third one. They count along the control cable from the cab's vehicle,
  behind the cab first. Like main_*, the start switch has to be held for the
  vehicle's IniCDelay with the vehicle ready (MainSwitchCheck); an impulse
  switch of an electric locomotive with series motors closes on release.
- New commands, added at the end of the command list: linebreakertoggleb,
  linebreakeropenb, linebreakercloseb, linebreakertogglec, linebreakeropenc,
  linebreakerclosec. No default keys.
- The logic is in vehicle/enginestart.{h,cpp} (core library), tested in
  tests/unit/test_engine_start.cpp.

Nothing changes for existing vehicles: the new key and the new cab controls
are optional, and without them the code does what it did before.

Game data (SVN, not changed here, to be done separately; the code works
without it): for the SN61 (dynamic/pkp/sn61_v2), whose cab models already
have the buttons start02/stop02/start03/stop03,
- sn61.fiz, sn61-86.fiz, sn61_v1.fiz and the other SN61 .fiz: add
  JointEngineStart=No to the Engine: line;
- sn61.mmd.inc (and the other SN61 includes): after main_on_bt add
  mainb_off_bt: { stop02 mov -0.005 0 0.1 ... }
  mainb_on_bt: { start02 mov -0.005 0 0.1 ... }
  mainc_off_bt: { stop03 mov -0.005 0 0.1 ... }
  mainc_on_bt: { start03 mov -0.005 0 0.1 ... }
  with the sounds of main_off_bt / main_on_bt.
The tooltips "line breaker B" / "line breaker C" are new strings for lang/*.po.
2026-11-08 07:12:30 +01:00
jerrrrycho
5d6f734b04 feat: pose door wings of the low poly interior along with the main model (eu07/maszyna#512)
The door wings are in the main model, where the door animation finds them, so seen from inside the
vehicle they are lit like the exterior and ignore the compartment lights. A door panel put into the low
poly interior instead stayed closed, since nothing moved it.

A door wing animation now also picks up the submodel of the same name in the low poly interior, if it
has one, and gives it the same pose (shift, rotate, fold with its child wings, plug). Placed under a
compartment section, such a wing is lit with the section and follows its light switch.

The pose maths moved unchanged to vehicle/doorwings.h, with unit tests.

Assets: optional. No low poly interior in the SVN or in the Steam install has a submodel named like a
door wing, so nothing changes for existing vehicles. To use it, a low poly interior gets the inside of
each door wing as a submodel named like the wing in the main model (door1, door01, drzwi1, ...), with
the same pivot and transform, under the compartment section it belongs to, with a SelfIllum threshold
like the section's, and slightly inside the wing of the main model.
2026-11-08 06:05:37 +01:00
jerrrrycho
c99a07ddd7 fix: initialize the gauge's parameter type for CI
The gauge copies made for the duplicate submodels start from a default
gauge, whose parameter type was left uninitialized (Sonar S836).
2026-11-08 04:08:15 +01:00
jerrrrycho
4b769d95c1 fix: SOD lamp shows the doors of the whole consist in three states (eu07/maszyna#288)
The door closure signalling lamp (i-door_blocked) showed only Doors.is_locked
of the occupied vehicle, so a door open in another car or a coupled unit
didn't show on it.

TMoverParameters::door_closure() gives the state of one vehicle (none, locked,
released, open), the driver gathers the most severe one of the train in
determine_consist_state(), next to IsAnyDoorOpen, and the lamp is lit for
locked doors, blinks for closed but released ones (a permit given, or no lock
engaged on doors that need no permit) and is dark with a door open.

doorclosuresignal in eu07.ini (default yes) switches it; with no the lamp
shows is_locked of the occupied vehicle as before. No data change needed.
2026-11-08 02:05:45 +01:00
jerrrrycho
326a84445b fix(lights): keep the headlight dimmer position within the DimmerList
modernDimmerPosition indexed dimPositions without a range check in
RaLightsSet(), SetLightDimmings() and the off_from_dimmer value of the
cab's Python state. An empty DimmerList, or a DefaultPos past the end of
a short one, read past the end of the vector; the dimmer commands could
also leave or put the position outside the list.

Reads go through currentDimPosition(), a plain entry (not off, not
dimmed) outside the list. DefaultPos and the position are clamped after
the .fiz is loaded, the increase/decrease commands step through
stepDimmerPosition(), which clamps and does nothing for an empty list,
and headlightsdimenable clamps its position 1.
2026-11-07 23:30:10 +01:00
jerrrrycho
d259251373 feat: cab controls can animate duplicate submodels (eu07/maszyna#527)
A control defined again in the same cab section of the .mmd with the
block key "duplicate: yes" no longer replaces the control: the first
definition stays the control (sounds, type, command feedback), and the
duplicate adds a copy with its own submodel, animation type and scale /
offset, following the control's value and active state. The duplicate's
sound keys are ignored so the control is not heard twice, and clicking
any copy works the control. This lets e.g. the ASF cab move its second
master controller and reverser with the first ones.

Without the key a repeated definition still replaces the earlier one,
as some of the game's .mmd files repeat controls with other submodels.
A duplicate with no definition of the control loaded from the current
cab's models before it is just the control.

clear_cab_controls() now also clears ggCompressorListButton, which kept
the previous cab's submodel.

The rule is in vehicle/gaugeduplicates.h, covered by
tests/unit/test_gauge_duplicates.cpp.

(eu07/maszyna#527)
2026-11-07 23:19:53 +01:00
jerrrrycho
d3dd883700 feat: light programmer positions can switch the cab light (eu07/maszyna#529)
An optional third column in the LightsList rows of the .fiz sets the cab
interior light when the driver moves the light preset selector to that
position: 0 off, 1 on, 3 on dimmed (bit 2 the dimmer). Rows without the
column, or with a negative value, leave the cab light to its own switch,
so the existing tables work as before; a stray note after the two light
columns (e.g. "38 38 / A") is not read as the flag.

The light follows the occupied cab, or all cabs of a JointCabs vehicle,
as with the interior light commands; the dimmer switch is moved along.
The lightsset custom position and the AI leave the cab light alone.

Covered by tests/unit/test_lights_preset_cablight.cpp.

(eu07/maszyna#529)
2026-11-07 23:13:00 +01:00
jerrrrycho
30bdc3da61 feat: radio fuse, a cut-off in the radio's power supply (eu07/maszyna#438)
TMoverParameters::RadioFuse, closed by default, stands for a fuse in the
cabinet, a lever on the desk or the switch on the radio's power supply.
RadioPowered() needs it closed, so with it open the radio's buttons, calls,
messages and the radio-stop stop working; opening it at a standstill resets
the radio-stop as switching the radio off does, and the radio and radio-stop
lamps go out. New commands radiofusetoggle/radiofuseenable/radiofusedisable
(no default keys), cab controls radiofuse_sw: (follows the fuse state),
radiofuseon_sw: and radiofuseoff_sw:, and radio_fuse for the Python screens.
The AI turning the radio back on closes the fuse too.

Existing vehicles don't change: the fuse starts closed and opens only from a
new cab control or a bound key. SVN data, optional: cabs that have such a
fuse or lever get one of the new controls in their .mmd, in the form of
radio_sw: (e.g. "radiofuse_sw: { <submodel> rot 0 0 0 }"); lang/*.po can
translate "radio fuse".

(eu07/maszyna#438)
2026-11-07 21:33:28 +01:00
jerrrrycho
8f51ea9a19 feat(ai): suggested pantograph setup for shunting in the .fiz (eu07/maszyna#461)
A new optional key in the AI section of the .fiz, ShuntPantstate= (bits as in
Pantstate: 1 front, 2 rear, 3 both), sets the pantographs the AI driver keeps
up while its order is Shunt or Loose_shunt, moving and standing alike: it
raises those of the setup and lowers the others once one of the setup
collects the voltage, and doesn't raise more when idling. Lowering on the
track's demand still comes first. Without the key (default 0) nothing
changes, so an ET41 no longer has to shunt on all four pantographs once its
.fiz says so.

SVN data, optional: add "AI: ShuntPantstate=<1|2|3>" to the .fiz of vehicles
that should shunt on fewer pantographs, e.g. dynamic/pkp/et41_v2/203e-a.fiz,
203e-b.fiz and their _dsa150 variants (no AI line there yet). Without it the
vehicles behave as before.

(eu07/maszyna#461)
2026-11-07 21:32:41 +01:00
dccb26b77a Merge pull request #234 from dos1/tristate
Train: Handle 3-way light switches in headlighttoggle actions
2026-11-07 20:24:19 +00:00
cd52ec8799 Merge pull request #259 from MaSzyna-EU07/fix/sm03-engine-shutdown
fix(cab): a diesel with only the starter button stops its engine with the main switch off command (eu07/maszyna#427)
2026-11-07 20:23:21 +00:00
pwarszawski
04b208bbaf Merge branch 'fix/est3-valve' into feat/ai-braking-earlier-steps 2026-11-07 21:17:12 +01:00
pwarszawski
71d4645e09 Merge remote-tracking branch 'origin/master' into fix/est3-valve 2026-11-07 21:17:04 +01:00
jerrrrycho
6dc1239553 fix: no multiple-unit control between electric and diesel locomotives
An electric and a diesel locomotive got their control coupled whenever the
scenario (and so the Starter) asked for it, since the scenery coupling ignores
ControlType, or when neither coupler named a control system, so a Vectron and
an SM42 ran in multiple unit.

TMoverParameters::Attach() now leaves the control connection out between an
electric (ElectricSeriesMotor, ElectricInductionMotor) and a diesel
(DieselEngine, DieselElectric/DumbDE) traction vehicle, for the scenery, the
AI, the coupling keys and the automatic couplers alike, and logs it. Vehicles
without own traction (cars, control trailers) are not affected, nor are
permanent couplings within a unit, nor couplers that both name the same
ControlType, which stays the vehicle authors' way to allow such a pair. The
AI coupling order expects the coupling the vehicles can take, so it doesn't
wait for the control connection forever.

Existing scenarios coupling such a pair still load, without the control
connection. "controlcoupling.enginecheck no" in eu07.ini turns the check off.
No SVN data change is needed. (eu07/maszyna#520)
2026-11-07 21:16:19 +01:00
jerrrrycho
5bc4e7cd2e feat: lock field shunting at zero and on resistive positions
New optional Cntrl. key ScndCtrlResistiveLock=Yes: IncScndCtrl() refuses
to step the shunt controller up while the master controller is at its
no-power position or on a resistive RList position (R >= 0.01), as the
interlock of the ET21, ET22 and EP09 does. Decreasing the shunt stays
allowed so it can't get stuck. The AI doesn't choose field shunting
while the lock applies. Without the key nothing changes.

Game data: the key is to be added to the Cntrl. line of the ET21
(et21_v2), ET22 (et22_v3, et22-2000_v2) and EP09 (ep09_v1, ep09_v2)
.fiz files that define it; until then they behave as before.

(eu07/maszyna#402)
2026-11-07 21:01:54 +01:00
jerrrrycho
d8f3875929 fix(gfx): diesel smoke only once the engine fires, not while the starter turns (eu07/maszyna#523)
The smoke of a diesel came out at full strength the moment its ignition
set Mains and started the spin up, together with the ignition sound, whose
first part is the starter cranking the engine.

The ignition now starts a countdown of the new optional .fiz parameter
SmokeDelay (Engine section of DieselEngine and DieselElectric vehicles,
seconds, default 2.0, 0 restores the old behaviour); the smoke source of
the vehicle spawns nothing until it runs out. Engines already running, or
switched on another way, smoke as before. No SVN data change is needed;
vehicle authors may tune SmokeDelay to the cranking part of their
ignition: sample.
2026-11-07 18:22:42 +01:00
jerrrrycho
d7c66fa7bc feat: bistable hold coil lever of the line breaker (eu07/maszyna#364)
main_off_bt declared with "type: toggle" in the cab's .mmd is now the
line breaker's hold coil lever of the ET22 and EP09: it stays where it is
put. Off, it opens the line breaker and keeps it from closing (also
cancelling a closing armed by a held main_on_bt); back on, it only feeds
the coil again. The single keyboard key puts the lever back on before
closing, and a line breaker closed by the AI or through the control
cable puts the lever back on to match.

TGauge now remembers whether type: was given, since every control
defaults to toggle. Without type: on main_off_bt (all vehicles today)
nothing changes.

Data (SVN, not part of this commit): add "type: toggle" to main_off_bt:
in dynamic/pkp/et22_v3/*.mmd and dynamic/pkp/ep09_v1, ep09_v2/*.mmd.
Older exes ignore it.
2026-11-07 18:10:59 +01:00
pwarszawski
8d1d9eec9b AI braking: smaller steps, earlier, while approaching a stop or a lower speed
Changes to how the AI works the train brake on the way to a lower speed
or a stop, so that it uses few, early applications instead of a late
deep one:

- Approaching a lower speed, the deceleration may fall short of the
  demand by only half of a step (fBrake_a1) before the brake is applied
  harder. With a full step the demand crept up meanwhile and a long G
  train got its next step many seconds too late.
- The shortfall is checked every 3 s. If it keeps growing at a handle
  left alone for longer than the brake takes to respond, the AI adds a
  small step at once instead of waiting until the margin calls for a
  deep one. A shortfall that shrinks on its own (brake still filling,
  blocks gripping harder at lower speed) does not trigger it.
- Releasing, a position short of the first one counts as giving the
  minimum stage of the distributor, not less.
- Holding the speed on a descent, the predicted excess speed is taken
  off over the time the brake takes to respond, not at once, so a slow
  brake does not get a deep application that then takes as long to
  release.
2026-11-07 18:10:47 +01:00
jerrrrycho
441caeed64 refactor(simulation): tidy the test mode code
The test manager is reached through simulation::test() instead of a global,
the result cell is owned by a unique_ptr until the memory table takes it, the
cell value is compared with a margin, strings are built with std::format and
the --test settings moved to apply_test_mode_settings(). The driver's signal
check is folded into UpdateSpeedPosition(), which updates a speed table entry
and reports a signal at stop the head of the train just passed. The test.*
keys are listed with the other settings at the start of the log.
2026-11-07 17:12:11 +01:00
jerrrrycho
02e29f6971 feat(simulation): test mode, --test runs a scenery unattended and exits with the result (eu07/maszyna#541)
eu07 --test -s <scenery> [--test-timeout <s>] runs the scenery in ghostview with
the null renderer (models loaded, no textures), a hidden window, no sound,
network or python, and in fixed steps of 0.03 s of simulation time per frame
(three 10 ms physics steps) as fast as it can. Without -seed it uses a fixed
seed, so two runs give byte-identical physicslogs.

The scenery reports its result to the __test.result memory cell, which the
simulator always creates: value 1 passes once every vehicle has stood still for
1 s, value 0 fails at once. The run ends with exit code
  0 pass, 1 fail,
  2 a train passed a signal at stop (SetVelocity 0 0, as seen in its driver's
    speed table; SetVelocity 0 x on automatic block doesn't count),
  3 timeout (test.timeout, default 3600 s of simulation time),
  4 standstill (every vehicle still for test.standstill s, default 300, with no
    result; a pass with test.pass_on_standstill yes),
  5 error (no -s, the scenery didn't load or has no vehicles, an exception).
The test.* keys go in the scenery's config block; test.fail_if_stop_overran no
only logs a signal passed at danger. Outside the test mode a signal passed at
danger is logged.

The null renderer gets a ui backend which draws nothing, hands out the null
texture and material instead of throwing, and ends the ui frame. A GL context
is still made for the hidden window, without asking for a version, as parts
of the ui create textures with gl calls of their own. No crash dialog or
message box in test mode; the window code no longer needs a monitor.
2026-11-07 16:20:42 +01:00
jerrrrycho
fe9e2f77c2 feat(log): vehicle speed column in the physicslog
The Velocity column is the wheel speed, which stays at 0 while the wheels
are locked in a skid, so a vehicle sliding on locked wheels looked as if
it stood still. Add the signed vehicle speed in km/h as the last column.
2026-11-07 16:20:42 +01:00
pwarszawski
439e892abd AI: use the locomotive releaser only when starting off
The rule "wyluzuj lokomotywe, to szybciej ruszymy" released the
locomotive's own brake whenever power was asked for and the locomotive
cylinder held more than 0.4 bar. It had no speed condition, so it also
fired in motion, at 50-75 km/h, right after an application. On a
locomotive with the EStED distributor (E186) this vented the control
reservoir; with the pipe not yet recharged the locomotive brake then
faded to nothing at the next application.

The rule is meant for starting off, so it now applies only below
1 km/h.
2026-11-07 15:35:35 +01:00
917c472cc9 Merge pull request #257 from MaSzyna-EU07/fix/vehicle-removal-smoke
fix(gfx): a vehicle taken off the tracks stops smoking (#90)
2026-11-07 13:28:31 +00:00