* fix: inverted clamp bounds give the upper bound again, as the old clamp did The project's own clamp() of 26.05 applied the lower bound first and the upper one last, so bounds given the wrong way round always gave the upper one. Its calls became std::clamp (undefined for such bounds) and, where the bounds can cross, safe_clamp, which swapped them instead. Neither gives the old result. - safe_clamp is the old clamp again, min(max(value, lo), hi). This restores 26.05 at every place it is used, among them the AI's dynamic brake test (its demand was fAccThreshold x1.21, the swap made it x1.01), the generator voltage, the heavy cargo acceleration of the AI and the EP correction of the brake. - The cab camera is kept inside the cab with safe_clamp. The bounds come from the .mmd as written and some cabs have them reversed (the B cars of SA134 and 21xM, ET40, 754); with std::clamp the camera jumped between the two bounds every frame on MSVC, as its result is fed back. * fix: every call of the old clamp gives what it gave up to 26.05.1d1f16411(#99) made every call of the project's clamp() std::clamp. Where the bounds come from the data or are computed at runtime they can cross, and then std::clamp gives another result (undefined behaviour; MSVC gives the lower bound unless the value is above the upper one) where the old clamp gave the upper bound. These calls use safe_clamp, the old clamp, too: - Mover: the pantograph pressure (MaxPress), the compressor switch (CompressorListPosNo), the coupler distance (DmaxB, DmaxC), the engine revolutions, the eimic ramp (CtrlDelay), the eimic limit (eimic_max), the speed control ramp (PowerUpSpeed, PowerDownSpeed), the load (MaxLoad), the magnet of the security system (Dim.L); - DynObj: the coupler distance of the buffers (DmaxB), the axle distance (Dim.L); - Train: the brake handle positions (BrakeCtrlPosNo, the range of the handle); - the legacy renderer: the mouse pick (the window size). With the bounds in order nothing changes. Calls whose bounds the code keeps in order (constants, SplineFidelity 1-4, the season table, the guarded output calibration) give the same result with std::clamp and stay as they are. The load offset takes its arguments in the 26.05.1 order again;fa2ed089swapped them, which with the old clamp differs only for a negative load. The bump at a rail joint gives the old result again. Up to 26.05.1 its clamps had 0 in place of the value (since96f43e11and4d72d352), and the old clamp made that the headroom Vmax - (Vel + 0.32 Vmax), negative above 68% of the top speed, capped from above only;d464628aand03bfbb13kept it at 0 or above. Only damaged track has the bump: a damage flag in the .scn, a derailer set by an event, a track made on a derailment. The interior light of the cab in the 3.3 renderer is computed in double again, as befored1f16411. The call added since (stepped_uc_value,00955513) keeps what master does: bounds given the other way round are put in order. * fix: the alpha of a particle in the legacy renderer as up to 26.05.1, the NaN cases of the clamp tested Up to 26.05.1 the alpha was clamp<std::uint8_t>( particle.opacity * 255, 0, 255 ): the float was made a byte first, so the clamp did nothing and an opacity over 1 (a smoke max_opacity over 1) wrapped round, 1.2 giving 50. The move to std::clamp made it 255. It's made a byte as then again, through int: the byte the x86-64 compilers gave, without the undefined behaviour of that conversion (MSVC makes the same two instructions of both). openglparticles.cpp goes with feat/gl46-migration; its opengl33 counterpart, std::clamp( opacity, 0, 1 ), already gives what 26.05.1 gave. The tests pin what the old clamp gave with NaN: a NaN value stays NaN, a NaN bound doesn't clamp. The checks named after the AI braking test and the bump at a rail joint say they test the helper with the arguments of those calls, not the calls. * test: the includes of the clamp tests before the project's headers <cmath> and <limits> go up, after the test headers, so the change no longer touches the lines #416 adds its includes after. With both merged <cmath> is included twice, which is harmless. --------- Co-authored-by: maj00r <maj00r@host>
MaSzyna - Railway vehicle simulator
Website · Report an issue · Community Discord · MaSzyna on Steam · MaSzyna on Epic Games Store
MaSzyna executable source code is licensed under the MPL 2.0 and comes with a large pack of free assets under a custom license.
Table of Contents
Getting Started
MaSzyna compiles and runs natively on Linux and Windows. Other platforms are not tested.
Heads-up
Our dev team is small; we keep improving the build process, but issues may still occur. If you get stuck, please ask on the official Discord server.
Prerequisites
For runtime requirements see Minimum Requirements.
1) Software (oldest tested in parentheses)
Note: MinGW is currently not supported.
2) Libraries (oldest tested in parentheses)
-
GLFW 3.x (3.2.1)
If a link error occurs, pass-DGLFW3_LIBRARIES="<path>"to CMake. -
GLM (0.9.9.0)
-
libserialport (0.1.1)
-
libsndfile (1.0.28)
-
LuaJIT (2.0.5)
-
GLEW (2.1.0)
-
libpng (1.6.34)
-
OpenAL (1.18.2)
-
pthread
-
Python 3.14 (64-bit; headers and import library required for embedding)
-
Asio (1.12)
3) Graphics API
- OpenGL 3.0 or newer
- DirectX 12 via NVRHI (optional, Windows only, for Better Renderer)
CMake flags
| Flag | Meaning |
|---|---|
-DCMAKE_BUILD_TYPE=Debug |
Debug build |
-DCMAKE_BUILD_TYPE=Release |
Release build |
-DCMAKE_BUILD_TYPE=RelWithDebInfo |
Release build with debug symbols |
-DWITH_BETTER_RENDERER=ON/OFF |
Enable/disable NVRHI-based renderer |
-DPython3_ROOT_DIR=<path> |
Root of the Python 3.14 install on Windows (python.exe, Lib, DLLs) for embed/copy steps; on Linux, optional if CMake picks the wrong interpreter |
Linux note:
WITH_BETTER_RENDERERuses DirectX 12 through NVRHI and is not supported on Linux.
Windows
Install Python 3.14 x64 from python.org and include the optional Python native development feature (headers and .lib for embedding). Pass -DPython3_ROOT_DIR="C:\Path\To\Python314" on the cmake line when you want the layout under that directory used for embedding and for copying Lib / DLLs next to the executable. The cab screens are drawn with Pillow: install it into that Python (python -m pip install Pillow) before building, so it is copied along with Lib.
AppVeyor CI builds with the worker image’s preinstalled Python at C:/Python314-x64 (see appveyor.yml: -DPython3_ROOT_DIR=...).
# Clone repository with submodules
git clone --recursive https://github.com/MaSzyna-EU07/maszyna.git
cd maszyna
# Init vcpkg
call setup.bat
# Create directory for CMake build files
mkdir build
cd build
# Generate CMake project (replace %CONFIG% with Debug/Release/RelWithDebInfo)
cmake .. -G "Visual Studio 17 2022" -A x64 -DCMAKE_BUILD_TYPE=%CONFIG%
# Build (replace %CONFIG% accordingly)
cmake --build . --config %CONFIG% --parallel
Linux
# Install dependencies (Fedora/RHEL family)
sudo dnf install -y \
@development-tools \
cmake \
mesa-libGL-devel \
glew-devel \
glfw-devel \
python3.14-devel \
libpng-devel \
openal-soft-devel \
luajit-devel \
libserialport-devel \
libsndfile-devel \
gcc \
g++ \
wayland-devel \
wayland-protocols-devel \
libxkbcommon-devel
# Clone repository with submodules
git clone --recursive https://github.com/MaSzyna-EU07/maszyna.git
cd maszyna
# Create directory for CMake build files
mkdir build
cd build
# Generate Makefiles (NVRHI is not supported on Linux)
cmake .. -DWITH_BETTER_RENDERER=OFF
# Compile using all cores
make -j"$(nproc)"
Tip (Ubuntu/Debian): Package names differ; install equivalent
build-essential,libgl1-mesa-dev,libglew-dev,libglfw3-dev,python3.14-dev,libpng-dev,libopenal-dev,libluajit-5.1-dev,libserialport-dev,libsndfile1-dev, and Wayland/X11 dev packages as needed.
Installing
There is no make install yet. Copy the built executable to your MaSzyna installation manually.
-
Output directory:
./bin -
File name format:
eu07_YYYY-MM-DD_<commit>[_d]-
YYYY-MM-DD– build date -
<commit>– short commit hash -
_d– present in Debug builds
-
If you already have the MaSzyna assets, copy the executable to the install dir. Assets can be downloaded from eu07.pl.
Rainsted on Linux
If Rainsted (a third‑party starter) fails to detect the executable under Linux, you can create a small wrapper script named eu07.exe:
#!/bin/sh
./eu07 "$1" "$2" "$3" "$4" "$5"
If detection still fails, padding the file (with comments) up to ~1 MB may help.
Known Issues
-
GLFW linking – On some systems you must provide the GLFW library path explicitly with
-DGLFW3_LIBRARIES. -
X11/Wayland linking order – Linking order of X11 and related libs can matter.
-
NVRHI on Linux – The NVRHI/"Better Renderer" path targets DirectX 12 and is currently unsupported on Linux.
Support
-
Official Discord Server: https://discord.gg/qAh9ctWPQv
-
Project page: https://eu07.pl/
Minimum requirements
- OS: Windows 10 64-bit
- Processor: 2 core at least 2 GHz (e.g. Intel Core i3-2100 / AMD Athlon II X2)
- RAM: 6 GB RAM
- Graphics Card: supporting OpenGL 3.3 with at least 1GB VRAM
- 150 GB of free disk space
- Sound card supporting OpenAL with stereo
- Optional COM ports for custom control panel setups.
License
-
Source code: MPL 2.0
-
Assets: Custom license
