* fix(ai): shunting AI brakes for a stop point again, the braking curve doesn't plan from a brake table left at zero The braking curve outside the final approach plans from the consist brake table sincece87aa0e(#187, merged with #264) whenever the brake is pneumatic. That table is worked out only for train running (Obey_train, Bank); in shunting it stays at zero, the planned full braking falls to its floor of 0.01 m/s2, and the demand comes out at a few hundredths of a m/s2, above the shunting brake threshold of -0.2. A shunting engine then rolled on without braking until the final approach, too late, and ran through the signal it was to stop at (seed 480873929 of l053_poranek: ep07p-2003 at sandomierz_g4_sem_info, sm42-1096, et22-654). With no worked out table the curve is again the constant deceleration over the distance left, as it was beforece87aa0eand as #187 meant to keep it for shunting. Train running is unchanged. The curve moves out of TController into vehicle/brakingcurve.{h,cpp} so that it is unit tested: tests/unit/test_braking_curve.cpp checks a shunting engine braking to a stop point with the zeroed table, and that a train with a worked out table gets the same demand as before. * test(ai): pin the train braking-curve demand to the results of the code before the move A brake table that grips harder as the train slows and a gradient, so that a wrong gravity sign, table index or a dropped term in the shaped demand shows; the expected values were worked out with the code removed from TController::adjust_desired_speed_for_braking_curve. * fix(test): a train set across a signal doesn't pass it at danger the moment the AI first looks at it The speed table takes in events up to a train length behind the head, so a signal the train stands across at the start of a scenario is found already behind the head, becomes elapsed on its first update, and the test mode reported it as passed at danger (calkowo_lotos: st43-189 at mac_daleko3_sem_info, manewrowo3: st43-100 at suw_szopa_a02_sem_info, both at 13.6 s with the train at a stand, the signal 20 m behind the head). A point now counts as passed only when the head of the train had it ahead once; the blackbox record of passed signals follows the same rule. * fix(test): a signal found up to 5 m behind the head still counts as seen ahead The distance to an event is found in steps of a metre from the position of its memory cell, so a signal just ahead of the head (a train stopped short of it when the autopilot takes over, or set right at it at the start) could come out slightly behind it, and passing it would not be reported. The trains set across a signal that the previous commit is about stood 20 m past it. Still not reported: a signal crossed while the speed table is being traced anew in motion (a Timetable: command to a running train, the autopilot taking over in motion), as it is found behind the head when the trace is made. * docs(test): say what the seen-ahead tolerance gives up A train set less than 5 m past a signal at stop is still reported to pass it at danger: standing that close it can't be told from a train stopped just short of the signal, which the tolerance is there for. --------- Co-authored-by: maj00r <maj00r@host>
MaSzyna - Railway vehicle simulator
Website · Report an issue · Community Discord · MaSzyna on Steam · MaSzyna on Epic Games Store
MaSzyna executable source code is licensed under the MPL 2.0 and comes with a large pack of free assets under a custom license.
Table of Contents
Getting Started
MaSzyna compiles and runs natively on Linux and Windows. Other platforms are not tested.
Heads-up
Our dev team is small; we keep improving the build process, but issues may still occur. If you get stuck, please ask on the official Discord server.
Prerequisites
For runtime requirements see Minimum Requirements.
1) Software (oldest tested in parentheses)
Note: MinGW is currently not supported.
2) Libraries (oldest tested in parentheses)
-
GLFW 3.x (3.2.1)
If a link error occurs, pass-DGLFW3_LIBRARIES="<path>"to CMake. -
GLM (0.9.9.0)
-
libserialport (0.1.1)
-
libsndfile (1.0.28)
-
LuaJIT (2.0.5)
-
GLEW (2.1.0)
-
libpng (1.6.34)
-
OpenAL (1.18.2)
-
pthread
-
Python 3.14 (64-bit; headers and import library required for embedding)
-
Asio (1.12)
3) Graphics API
- OpenGL 3.0 or newer
- DirectX 12 via NVRHI (optional, Windows only, for Better Renderer)
CMake flags
| Flag | Meaning |
|---|---|
-DCMAKE_BUILD_TYPE=Debug |
Debug build |
-DCMAKE_BUILD_TYPE=Release |
Release build |
-DCMAKE_BUILD_TYPE=RelWithDebInfo |
Release build with debug symbols |
-DWITH_BETTER_RENDERER=ON/OFF |
Enable/disable NVRHI-based renderer |
-DPython3_ROOT_DIR=<path> |
Root of the Python 3.14 install on Windows (python.exe, Lib, DLLs) for embed/copy steps; on Linux, optional if CMake picks the wrong interpreter |
Linux note:
WITH_BETTER_RENDERERuses DirectX 12 through NVRHI and is not supported on Linux.
Windows
Install Python 3.14 x64 from python.org and include the optional Python native development feature (headers and .lib for embedding). Pass -DPython3_ROOT_DIR="C:\Path\To\Python314" on the cmake line when you want the layout under that directory used for embedding and for copying Lib / DLLs next to the executable. The cab screens are drawn with Pillow: install it into that Python (python -m pip install Pillow) before building, so it is copied along with Lib.
AppVeyor CI builds with the worker image’s preinstalled Python at C:/Python314-x64 (see appveyor.yml: -DPython3_ROOT_DIR=...).
# Clone repository with submodules
git clone --recursive https://github.com/MaSzyna-EU07/maszyna.git
cd maszyna
# Init vcpkg
call setup.bat
# Create directory for CMake build files
mkdir build
cd build
# Generate CMake project (replace %CONFIG% with Debug/Release/RelWithDebInfo)
cmake .. -G "Visual Studio 17 2022" -A x64 -DCMAKE_BUILD_TYPE=%CONFIG%
# Build (replace %CONFIG% accordingly)
cmake --build . --config %CONFIG% --parallel
Linux
# Install dependencies (Fedora/RHEL family)
sudo dnf install -y \
@development-tools \
cmake \
mesa-libGL-devel \
glew-devel \
glfw-devel \
python3.14-devel \
libpng-devel \
openal-soft-devel \
luajit-devel \
libserialport-devel \
libsndfile-devel \
gcc \
g++ \
wayland-devel \
wayland-protocols-devel \
libxkbcommon-devel
# Clone repository with submodules
git clone --recursive https://github.com/MaSzyna-EU07/maszyna.git
cd maszyna
# Create directory for CMake build files
mkdir build
cd build
# Generate Makefiles (NVRHI is not supported on Linux)
cmake .. -DWITH_BETTER_RENDERER=OFF
# Compile using all cores
make -j"$(nproc)"
Tip (Ubuntu/Debian): Package names differ; install equivalent
build-essential,libgl1-mesa-dev,libglew-dev,libglfw3-dev,python3.14-dev,libpng-dev,libopenal-dev,libluajit-5.1-dev,libserialport-dev,libsndfile1-dev, and Wayland/X11 dev packages as needed.
Installing
There is no make install yet. Copy the built executable to your MaSzyna installation manually.
-
Output directory:
./bin -
File name format:
eu07_YYYY-MM-DD_<commit>[_d]-
YYYY-MM-DD– build date -
<commit>– short commit hash -
_d– present in Debug builds
-
If you already have the MaSzyna assets, copy the executable to the install dir. Assets can be downloaded from eu07.pl.
Rainsted on Linux
If Rainsted (a third‑party starter) fails to detect the executable under Linux, you can create a small wrapper script named eu07.exe:
#!/bin/sh
./eu07 "$1" "$2" "$3" "$4" "$5"
If detection still fails, padding the file (with comments) up to ~1 MB may help.
Known Issues
-
GLFW linking – On some systems you must provide the GLFW library path explicitly with
-DGLFW3_LIBRARIES. -
X11/Wayland linking order – Linking order of X11 and related libs can matter.
-
NVRHI on Linux – The NVRHI/"Better Renderer" path targets DirectX 12 and is currently unsupported on Linux.
Support
-
Official Discord Server: https://discord.gg/qAh9ctWPQv
-
Project page: https://eu07.pl/
Minimum requirements
- OS: Windows 10 64-bit
- Processor: 2 core at least 2 GHz (e.g. Intel Core i3-2100 / AMD Athlon II X2)
- RAM: 6 GB RAM
- Graphics Card: supporting OpenGL 3.3 with at least 1GB VRAM
- 150 GB of free disk space
- Sound card supporting OpenAL with stereo
- Optional COM ports for custom control panel setups.
License
-
Source code: MPL 2.0
-
Assets: Custom license
