Second live test. Four things, three of them the same mistake seen from
different angles: the session was reasoning about single vehicles where it
should have been reasoning about trains.
- a peer may now operate anything coupled into the set it is sitting in. This
is what "cabchangebackward rejected: not a member of the crew of that
vehicle" was: the crew was recorded against one car of a four-car unit, and
the cab switch addressed another
- every vehicle gets a network id, not only the ones worth driving. Commands
are addressed by that id, and a player has to be able to walk into any car
of their train. "peer 3 cannot take en71-017rb_4: no such vehicle in this
session" was the driving trailer of an EN71 - a full desk, no engine, and
nobody assigned to it, so the old test missed it. Having a driving position
is what counts now, engine or not
- the roster groups vehicles into the trains they are coupled into and the
lobby lists one row per train. Coupling is worked out afresh every time, so
a train that comes apart becomes two, and because a crew entry sits on the
car its player occupies, each half keeps the people who were riding in it
- walking to another car of your own train is not a new claim and asks nothing
of the crew capacity, which counts people per train
Positional correction never actually did anything: it identified a track by
name, and most track in a scenery has none, so the lookup returned nothing and
place_on_track() was never reached. The client sat 178 m out of place for
minutes, reporting four vehicles "put back on the rails" every time while
moving none of them. Tracks now travel as their index in the path table, which
comes from the scenery file and is therefore the same on every peer.
Also from the test:
- the camera jumped in and out of the cab on the client whenever the host
reversed, because the correction was forcing the server's CabActive and
CabOccupied onto it. Which cab somebody sits in is theirs alone - two people
sharing a vehicle each have their own - so it is no longer replicated
- the correction no longer touches the control positions of the train the local
player is working. Their crew's commands reach every peer on their own, and
snapping a lever back a fraction of a second after it was moved is what made
the reverser look dead
- the frame buffer was sized for the old lockstep, up to sixty frames deep.
Every frame in it is input lag, so it is down to twelve with a target of one
- asking the AI of a vehicle to step aside is given five tries and then said
once, instead of every thirty frames forever; and a resync request now has a
real cooldown
First live test showed three things wrong at once.
A client could not take a vehicle. Walking up to a locomotive and pressing the
enter-vehicle key posts entervehicle, which stage 4 classed as a world-wide
command and refused outright ("reserved for the session host"), so the client
never got a cab and every later control command died locally for want of one.
Walking into a cab is a request for a seat, not a world command: the authority
now turns it into a crew claim, for the host through the same path as for a
remote peer, and answers it the way the lobby button is answered.
Nothing but commands was ever replicated. The server sent dt and the commands
it ran, and the client simulated the rest for itself - so a pantograph the host
raised before the client joined, the contents of the memory cells the signalling
reads, brake pressures and switch positions simply never crossed the wire. The
server now streams the authoritative state a few times a second: whatever has
changed since the last one, and the whole of it every so often so a peer heals
from anything it missed. The snapshot carries the vehicle's inputs - line
breaker, battery, converter and compressor permits, pantograph valves, cab,
lights, doors - and lets the receiving peer derive the rest, plus the memory
cells and the switches.
Desync detection demanded that two state digests be equal, on a design where
the client deliberately runs its own physics. They never can be, so it reported
a desync permanently and asked for a resync every five seconds forever, which
fixed nothing because the next step disagreed again. The digest is a log line
now; what is measured instead is how far out of place the routine correction
found us, and a full resync is only asked for when even that is not catching up.
Also: a consist is put back on the rails as a whole or not at all. Correcting
one vehicle while its neighbour stayed put is what was stretching couplers
until they tore - the last test moved six vehicles out of eight, every time.
And the lobby window collapsed to nothing, because its size_max was left at the
-1 default while size_min was set, so imgui was handed a maximum smaller than
the minimum.
A vehicle is not owned by one player: two people share a cab, so the session
needs a crew relation rather than an owner field. The server keeps it and is
the only one allowed to change it.
- network/session: vehicle_crew { entity_id, crew, ai_before_claim } and a
crew_registry holding the roster. the host goes through exactly the same
path as a remote peer (claim -> crew -> grant), only without transport
- CLAIM_VEHICLE / CLAIM_GRANTED / CLAIM_DENIED / LEAVE_VEHICLE / CREW_UPDATE;
the server validates the vehicle exists, is present in the scenario and has
room in the crew, and answers a refusal with a reason the lobby shows
- the cab of a claimed vehicle is created by the authority posting the
ordinary replicated entervehicle, so every peer builds it and the vehicle is
never moved. the claiming peer only walks in once the cab appears locally
- AI transitions follow the crew size: 0 -> 1 remembers whether an AI was
really driving and takes the vehicle over, 1 -> 2 and 2 -> 1 change nothing,
1 -> 0 hands the vehicle back but only if there was an AI driver to begin
with. driver mode no longer fires aidriverdisable of its own in multiplayer
- losing a connection removes that peer from every crew it was on; a vehicle
with somebody still on board carries on untouched
- the lobby lists who is on board, offers "join crew" for a vehicle another
player already occupies, and lets a player step off
The AI and cab handling runs as a reconciliation pass rather than as edge
triggered actions, so a request that has not taken effect yet (the cab needs a
frame to appear) is simply repeated, with a cooldown to keep it off the wire.
TTrain::id() numbers cabs with a local counter, in the order each peer happens
to create them, so it cannot address a vehicle across the session. Neither was
there any way for a player to see what is available to drive.
- network/entities: PeerId (the host is peer 1, remote peers are numbered from
2, so it is a participant rather than a special case) and NetworkEntityId,
plus a registry that numbers the drivable vehicles of the loaded scenario in
name order and resolves ids back to TDynamicObject
- the server owns the numbering and publishes it as VEHICLE_LIST - name, crew
occupancy, crew capacity, AI state, availability - on every change and at
least every 120 frames, out of band so it stays out of the replay backbuffer;
a client binds the received ids to its own copy of the scenario by name
- SERVER_HELLO hands the joining peer its PeerId
- a multiplayer lobby listing that roster, with vehicles taken by other players
shown as such rather than hidden; entering one goes through the existing
entervehicle command, the vehicle is never moved
The lobby lives inside the driver mode instead of a mode of its own: the world
has to keep running while somebody is choosing (a client stops consuming the
server's frames the moment its mode is not a command processor), and the same
screen is what a player needs to change vehicles later on.
Crew occupancy is still derived from the presence of a cab instance; the real
crew model, claim handshake and AI takeover follow in stage 3.
Both setweather and settemperature expect overcast as their second
parameter. Passing zero to settemperature always overwrites whatever
gets passed to setweather.
Launcher windows are more Starter-like now:
- The scenery picker, vehicle list and keymapper buttons are now tied to the top portion of the screen.
- The current window is spanning the entire rest of the screen.
- Scenarios are now grouped into categories in the exact same way as Starter does.
- Some drawbacks include:
- Currently you cannot edit the current trainset, as the vehicle picker window overwrites the scenario list window.
- The GUI doesn't update when the screen resolution is changed.
update vao creation to support optional vertex data
update mesh serialization to account for new user data location
change t3d spec: userdata:{float|uint|int} to userdata:bool
