18
0
mirror of https://github.com/MaSzyna-EU07/maszyna.git synced 2026-11-18 23:26:03 +01:00
Commit Graph

55 Commits

Author SHA1 Message Date
jerrrrycho
38202f4e57 Merge remote-tracking branch 'origin/master' into feat/second-loco-engine-start
# Conflicts:
#	CMakeLists.txt
2026-11-08 21:51:59 +01:00
maj00r
9fecba82f0 Merge pull request #291 from MaSzyna-EU07/fix/sod-lamp-whole-consist
SOD lamp: doors of the whole consist, three states (eu07/maszyna#288)
2026-11-08 20:56:20 +01:00
maj00r
17676863bc Merge pull request #266 from MaSzyna-EU07/feat/exe-test-mode
Test mode: `--test` runs a scenery unattended and exits with the result (#541)
2026-11-08 20:41:57 +01:00
jerrrrycho
8fb596f218 fix(simulation): any exception ends a test run with error, other runs as on master
main() tells a test run (--test) apart before anything runs. Only a test run
catches every exception and installs a std::terminate handler, both ending the
run with the error code and a test: line; any other run keeps master's
exception handling, so on Linux an uncaught runtime_error aborts at the throw
site again.

A test run doesn't start the Discord RPC thread: it published the test
scenery as the player's presence and held the closing up to 5 s.

run.py drops a case scenery's .sbt cache after a run cut short (wall_timeout,
error, a crash, killed by run.py), which could have been writing it.

The -edit branch of the test command line parser had no effect (a token that
isn't an option is ignored either way) and is gone; its test checks what can
be seen instead.
2026-11-08 19:46:16 +01:00
jerrrrycho
bbd7d9c5bf fix: a stopped diesel engine no longer stops the others every frame (eu07/maszyna#80)
dizel_Momentum() relayed MainSwitch 0 to the consist every frame while the engine stood still, whatever stopped it. In a train with mixed JointEngineStart flags an engine stopped from mainb_off stopped the engines behind it once it spun down, and the stopped engine of the cab's vehicle knocked out the one started from mainb_on. The stop is now relayed only when the engine stalls while running, as on master an engine stalling in a joint start still stops the others.
2026-11-08 19:38:16 +01:00
jerrrrycho
57db0087ff fix: the SOD lamp of the whole consist is opt-in per vehicle (DoorClosureSignal)
The three-state door closure lamp is switched on by DoorClosureSignal=Yes in the
Doors: section of the .fiz of the vehicle whose cab shows the lamp (the occupied
vehicle), off by default: without it the lamp keeps showing the lock of the
vehicle's own doors. The eu07.ini switch doorclosuresignal is gone, the data
decides. Sets whose cars lack DoorNeedPermit would blink at every standstill, so
only the sets with permits get the key.
2026-11-08 18:30:22 +01:00
jerrrrycho
91e0d90e8d fix: review of the separate engine start switches (eu07/maszyna#80)
- initialise the cooling power read from the .fiz to its default, no division by an indeterminate value
- integer step counters in the engine start tests
- main_sw opening the consist turns the two-state mainb_sw / mainc_sw off too, left on they'd start the engines again
- the doc comment of MainCircuitOpensWithStarterOnly() back on it; the .fiz read is the controlled vehicle's
2026-11-08 17:38:59 +01:00
jerrrrycho
22c588d8f9 feat(cab): 401Da oil pump lamp and slotted speedometer lever (eu07/maszyna#546) (#261)
* feat: 401da oil pump lamp and slotted lever animation (eu07/maszyna#546)

i-oilpump lights while the pre-lubrication oil pump works, so it goes
off once the engine runs. animslottedlever: in the .mmd turns a lever
by a pin on the coupling rod sliding in the lever's slot, which the
speedometer drive of 401Da needs.

The compressor start delay of #546 came with CompressorStartDelay
(Brake section) of master.

* fix: force GLM AVX2 only when the compiler targets AVX2

ENABLE_AVX2=OFF left GLM_FORCE_AVX2 defined, so MSVC still emitted
AVX2 intrinsics and the exe crashed on CPUs without AVX2.

* test: cover the compressor start delay and the oil pump lamp

The delay of an engine stopped before it passed starts over, a
compressor switched on by hand waits too, and the key is read from the
Brake section. In the converter-fed set-up of 401Da the compressor
waits for ConverterStartDelay and then its own delay. The oil pump
(i-oilpump lamp) works before the engine start and stops once the
engine runs.
2026-11-08 14:48:42 +01:00
jerrrrycho
5f46aca43a fix: a latching line breaker lever goes off with the breaker knocked out (#277)
The EP05's single two-state line breaker lever stayed on once the converter
overload relay knocked the breaker out: every press of the toggle tried to
close the open breaker, which the tripped relay refused. A press now puts
a lever left on over an open breaker off first.

(eu07/maszyna#394)
2026-11-08 14:48:04 +01:00
jerrrrycho
cea92f0170 test(unit): the test mode tests compare seconds with a tolerance
Floating point values of the command line, the real time limit and the
standstill clock are checked with doctest::Approx rather than ==.
2026-11-08 11:57:03 +01:00
jerrrrycho
e5aafd154f feat(simulation): the pass and the standstill wait for the train under test only
Both waited for every vehicle of the scenery to stand still, so on a scenery
with AI traffic a test could pass only when the traffic happened to stand too,
and the standstill end hardly ever came.

A test scenery names the train under test with test.vehicle <name> in its
config block (once for each train, if several): the pass and the standstill wait
for the consists of these vehicles as they are at the moment, so a train the
tested one couples to counts with it. A name the scenery doesn't have ends the
test with the error code. Without test.vehicle every vehicle counts, as before.
A signal passed at danger counts for every train either way.

run.py puts the case's lead vehicle into test.vehicle. test_mode_standstill_traffic
has the train under test standing on track 2 of Stacja1 while AI traffic leaves
track 1 on the timetable: it ends on its 100 s standstill, where counting every
vehicle runs into the 300 s timeout. Physicslogs of the other trains of a case
(<something>_<vehicle>) are moved out of the game dir too.
2026-11-08 11:39:52 +01:00
jerrrrycho
03a417c7b0 feat(simulation): a real time watchdog ends a test run that hangs
A test run that hung, in the loading or anywhere else, waited until whoever
started it killed it. A watchdog thread now ends a run still going test.wall_timeout
seconds of real time after the start of the simulator, loading included: it says
`test: timeout ... still running after N s of real time` and quits with the
timeout code, whatever the main thread is doing, with no dialog. A test that has
ended but whose simulator doesn't close ends with its own result.

The limit is test.wall_timeout (settings, the scenery's config block) or
--test-wall-timeout, which wins. Not given, it is test.timeout + 600 s: ten
minutes for the loading, and a simulation that runs at least as fast as real
time is never cut short. test.timeout 0 means no watchdog unless the limit is
given; test.wall_timeout 0 turns it off.

run.py passes the case's timeout as --test-wall-timeout and kills a simulator
only 30 s after it. A timeout from the watchdog counts as wall_timeout there, so
a run that hung doesn't pass a case expecting the simulation time to run out;
test_mode_wall_timeout ends while loading on a limit of 2 s.
2026-11-08 11:33:36 +01:00
jerrrrycho
14d25520f3 fix(simulation): a test's standard output carries its result only
The log was printed in colour to stdout too (debuglog bit 2), so a script reading
the verdict of a test got the whole log with it. In test mode the log goes to the
log file only and stdout has the `test: ...` line alone; the usage text of a bad
command line goes to stderr. Whether the run is a test is now known before the
log service starts.
2026-11-08 11:23:02 +01:00
jerrrrycho
1626df2bc4 fix(simulation): a scenery's config block can't turn back on what a test keeps off
The config block of a scenery is read like the settings files, after the test
mode settings were applied, so a scenery with soundenabled, multiplayer,
execonexit, feedbackmode or the like in it got them back in a test run. The test
mode settings now are applied again after each config block of the scenery;
apply_test_mode_settings() moved to simulationtest.cpp for that.
2026-11-08 11:22:37 +01:00
jerrrrycho
7f8892cda6 fix(simulation): a test doesn't read the player's own eu07.ini
The simulator reads eu07.ini from %APPDATA%/MaSzyna (~/.config/MaSzyna on Linux)
when there is one, in place of the game folder's. A test run then depended on
whose machine it ran on. With --test only the game folder's eu07.ini is read,
then the files given with -ini. The test mode options are taken from the command
line before the settings for that; --test-timeout still wins over test.timeout
of any settings file.
2026-11-08 11:21:57 +01:00
jerrrrycho
baf6bc2a20 feat(simulation): the test mode's exit codes keep clear of 1 and 3
1 is what a process killed with TerminateProcess (and the plain failure of most
programs) ends with, 3 what abort() ends with on Windows, so a fail or a timeout
couldn't be told from a run that was killed or blew up. The codes other than
pass now are 10 fail, 11 signal passed at danger, 12 timeout, 13 standstill and
14 error: none of them a code a process gets on its own, neither the shells'
126-127 nor 128 + a signal number on Linux. pass stays 0.
2026-11-08 11:21:30 +01:00
jerrrrycho
486a714f52 refactor(simulation): the rules of the test mode in a file of their own, with unit tests
The command line options of the test mode and the end conditions checked after
each frame are now plain functions in simulation/simulationtestrules.cpp, which
needs nothing of the running simulation: parse_test_command_line() and
evaluate_frame(). The file is part of the core library, so the unit tests check
them (tests/unit/test_test_mode.cpp): the --test-timeout value, values of other
options not taken for options, a pass that waits for the stop, the standstill,
the timeout. test_manager only gathers what a frame brought and acts on the
verdict. No change in behaviour.
2026-11-08 11:20:52 +01:00
jerrrrycho
62526e9d6a test(scenarios): the timetable cases check where the train stops, not how long
Przystanek on td.scn is a technical stop of the td/rozklad timetable (pt): the AI
doesn't wait there for the departure time but sets off as soon as it counts the
train as standing at the W4, below 1 km/h. How long the speed then stays under
0.5 km/h is only how fast the brake releases. With the AI braking of #264 the
trains creep up to the W4 at about 10 km/h on a light application and stood there
for 1-5 s; the SN61 turns back at 0.36 km/h without stopping. The hold of 5 s
(2 s for the SN61) failed for EP09, SN61 and Vectron and had well under a second
to spare for others.

The cases now check that the train comes down to 1 km/h, the AI's own standstill
at a W4, 1380-1420 m from the start; every vehicle stops at 1397-1401 m, before
and after #264. `stops` takes min_distance and max_distance for that.
2026-11-08 11:16:40 +01:00
jerrrrycho
491ed3e6da Merge remote-tracking branch 'origin/master' into feat/exe-test-mode 2026-11-08 10:58:43 +01:00
jerrrrycho
b2331ad2d1 docs(test): what waits for a test run in cmd, checked
start /wait gives the exit code but not the output; a .bat file waits
for the windowed simulator and passes its output on.
2026-11-08 09:37:32 +01:00
jerrrrycho
1b373bcc38 docs(test): the test mode README on the new ends, outside settings and Windows shells
- what the test mode turns off towards the outside (feedbackmode,
  multiplayer, execonexit, showsystemconsole, imgui.ini),
- a command line it can't take or a failed start ends with `error`,
- cmd and PowerShell don't wait for the (windowed) simulator nor show its
  output: start /wait, Start-Process -Wait,
- 15 cases, not 14.
2026-11-08 09:36:56 +01:00
jerrrrycho
13ded6cdfa feat: separate engine start switches for the vehicles in multiple (eu07/maszyna#80)
In vehicles like the ST43, the SP32 or the SN61 every engine of a train in
multiple has its own start and stop buttons in the cab. Until now the cab's
line breaker / engine start switch (main_sw, main_on_bt, main_off_bt) always
started and stopped the engines of all the vehicles under its control.

- .fiz, Engine: JointEngineStart=Yes|No (default Yes, as before). With No
  the cab's main_* work the cab's own vehicle only, and an engine stopping on
  its own (stalled, out of fuel) stops only its own vehicle instead of every
  engine in the train.
- .mmd: mainb_sw, mainb_on_bt, mainb_off_bt work the second vehicle with an
  engine under the cab's control, mainc_sw, mainc_on_bt, mainc_off_bt the
  third one. They count along the control cable from the cab's vehicle,
  behind the cab first. Like main_*, the start switch has to be held for the
  vehicle's IniCDelay with the vehicle ready (MainSwitchCheck); an impulse
  switch of an electric locomotive with series motors closes on release.
- New commands, added at the end of the command list: linebreakertoggleb,
  linebreakeropenb, linebreakercloseb, linebreakertogglec, linebreakeropenc,
  linebreakerclosec. No default keys.
- The logic is in vehicle/enginestart.{h,cpp} (core library), tested in
  tests/unit/test_engine_start.cpp.

Nothing changes for existing vehicles: the new key and the new cab controls
are optional, and without them the code does what it did before.

Game data (SVN, not changed here, to be done separately; the code works
without it): for the SN61 (dynamic/pkp/sn61_v2), whose cab models already
have the buttons start02/stop02/start03/stop03,
- sn61.fiz, sn61-86.fiz, sn61_v1.fiz and the other SN61 .fiz: add
  JointEngineStart=No to the Engine: line;
- sn61.mmd.inc (and the other SN61 includes): after main_on_bt add
  mainb_off_bt: { stop02 mov -0.005 0 0.1 ... }
  mainb_on_bt: { start02 mov -0.005 0 0.1 ... }
  mainc_off_bt: { stop03 mov -0.005 0 0.1 ... }
  mainc_on_bt: { start03 mov -0.005 0 0.1 ... }
  with the sounds of main_off_bt / main_on_bt.
The tooltips "line breaker B" / "line breaker C" are new strings for lang/*.po.
2026-11-08 07:12:30 +01:00
jerrrrycho
4b769d95c1 fix: SOD lamp shows the doors of the whole consist in three states (eu07/maszyna#288)
The door closure signalling lamp (i-door_blocked) showed only Doors.is_locked
of the occupied vehicle, so a door open in another car or a coupled unit
didn't show on it.

TMoverParameters::door_closure() gives the state of one vehicle (none, locked,
released, open), the driver gathers the most severe one of the train in
determine_consist_state(), next to IsAnyDoorOpen, and the lamp is lit for
locked doors, blinks for closed but released ones (a permit given, or no lock
engaged on doors that need no permit) and is dark with a door open.

doorclosuresignal in eu07.ini (default yes) switches it; with no the lamp
shows is_locked of the occupied vehicle as before. No data change needed.
2026-11-08 02:05:45 +01:00
cd52ec8799 Merge pull request #259 from MaSzyna-EU07/fix/sm03-engine-shutdown
fix(cab): a diesel with only the starter button stops its engine with the main switch off command (eu07/maszyna#427)
2026-11-07 20:23:21 +00:00
d6f20f1b0f Merge pull request #260 from MaSzyna-EU07/fix/sx45-line-contactors-lamp
fix(cab): on the SU45 and SU46 the open line contactors lamp lights with the contactors opened by the pressure switch (eu07/maszyna#263)
2026-11-07 20:22:53 +00:00
pwarszawski
39244a88a5 tests: wait for the pressure switches before notching up
full_power() notched up as soon as the controlling half had closed its line
contactors. In the ET42 test the locomotive brake is still at about 2.0 bar
then, right at the pressure switch threshold, so whether the second half
starts as well depended on thousandths of a bar in its cylinder: a half whose
switch is on when the controller leaves zero doesn't close its line
contactors until the controller is back at zero. Any change to the air
brakes could tip it either way (with the corrected ESt3 the second half
stayed off and the train reached 88.7 instead of 106 km/h).

The helper now waits, as a driver does, until no pressure switch in the
train cuts the start off.
2026-11-07 21:17:12 +01:00
jerrrrycho
6ccf4b14bf feat(simulation): test.no_movement_before_pass, a pass that doesn't wait for a stop
The config key from eu07/maszyna#541. By default (yes) a pass reported to
__test.result waits until every vehicle has stood still for 1 s; with no it
ends the test at once. The key is listed with the other test.* settings in the
log and in the test start line.

Scenario tests: new case test_mode_pass_while_moving reports the pass from
event2 of tor1k as the train runs onto it and checks the run ended with the
train still moving (new check ends_moving). The README lists the test.* keys
with their defaults and the input the test mode ignores.
2026-11-07 17:38:38 +01:00
jerrrrycho
6a538d202b test: scenario tests run in the simulator's test mode and check its exit code
run.py starts eu07 with --test (and --test-timeout <duration> for cases that
record a fixed time) and compares the result from the exit code with the
case's expect key, before the physicslog checks. The 14 cases take about 30 s
with -j 4 instead of minutes. --watch keeps the old windowed run.

New case keys: expect, test_config (lines of a config block), track_events
(lines added to a track of the base scenery, e.g. event0 test_pass). New cases
show each end of the test mode: test_mode_pass, _signal_passed_at_danger,
_timeout and _standstill. The slippery rail cases slide past the red signal,
which now ends a test, so they set test.fail_if_stop_overran no.

README documents the test mode for scenery authors.
2026-11-07 16:20:42 +01:00
jerrrrycho
6209e16558 test: slippery rail skid cases, wheelslip and vehicle speed checks
- physicslog rows keep all columns (text ones as None), checks can read
  the wheelslip flag and the new vehicle speed column
- slips: the lead vehicle's wheels slip at some point (makes sure a
  slippery rail case does what it's meant to)
- slip_clears: once stopped, the wheels stop slipping within N seconds
- holds_still: once stopped, the vehicle doesn't creep, by vehicle speed
- td_red_signal_moving.scn: the red signal case starting already moving
- eu07_slippery_red_signal / eu07_slippery_push_red_signal: skid on
  braking for the red signal with track friction 0.03; the pushing one
  fails without the fix for eu07/maszyna#479 (stays skidding, creeps)
- sn61_td_timetable: stop hold 5 -> 2 s, the railcar arrives 5-7 s
  before its departure time, so 5 s made the case flaky
2026-11-07 16:20:42 +01:00
jerrrrycho
219836b464 test: track_friction case key for slippery rail scenarios 2026-11-07 16:20:41 +01:00
jerrrrycho
cb0a122383 test: red signal case, seven vehicles on the td.scn timetable, parallel runs
- eu07_td_red_signal: no route set, the train has to stop before the exit
  signal and stay there (new checks stays_stopped and distance; distance
  is integrated from the speed, the physicslog has no position)
- en57/ep09/et22/sm42/sn61/vectron/eu07_td_timetable share one fragment
  template, td_timetable.scn; a case sets vars.consist and the lead vehicle
  is named {{vehicle}} = autotest_<case>
- -j N runs cases in parallel: each case has its own physicslog and, with
  multiplelogs, its own log files, which are moved to out/<case>/
- a run stops at once on Bad vehicle / Bad trainset instead of waiting for
  the timeout, and fails after 120 s without physicslog rows
- the .sbt geometry cache of a test scenery is dropped when the base
  scenery is newer

All 8 cases pass in about a minute with -j 4.
2026-11-07 16:20:41 +01:00
jerrrrycho
6cf8934acb test: run scenario tests at timespeed 20 by default
eu07_td_timetable now takes about 20 s instead of 4 min. Its speed profile
at 20 and 60 matched a real-time run within a few km/h and seconds; the
physicslog keeps its 0.05 s rows. The runner polls the log every 0.25 s so
it does not overshoot the case duration by a minute of simulation.
2026-11-07 16:20:41 +01:00
jerrrrycho
798fd89dd0 test: scenario tests that run the simulator and check a vehicle's physicslog
tests/scenarios/run.py builds a test scenery from a game install's scenery
(own trainsets removed, case fragment added), runs eu07 in ghostview with
physicslog on, and checks what the vehicle did: starts, max speed, brakes,
stops. First case: EU07 on td.scn driven by AI on the td/rozklad timetable,
with the Stacja1 exit route set by an event launcher instead of shift+4.

eu07 gets a -ini <file> option: an extra settings file read after eu07.ini,
so a test run can switch to a window and turn on physicslog without touching
the user's config.

Local only: scenery and vehicle data are not in the repo.
2026-11-07 16:20:41 +01:00
917c472cc9 Merge pull request #257 from MaSzyna-EU07/fix/vehicle-removal-smoke
fix(gfx): a vehicle taken off the tracks stops smoking (#90)
2026-11-07 13:28:31 +00:00
jerrrrycho
d90edb6980 fix(cab): on the SU45 and SU46 the open line contactors lamp lights with the contactors opened by the pressure switch (eu07/maszyna#263)
On the electric locomotives the lamp of the open line contactors tells the start can be made, so it goes out with the
start cut off by the pressure switch. The diesel-electric SU45 and SU46 (the only diesel-electrics with the lamp) use
it just to show the contactors are open, but it went out the same way: with too low a pressure in the main pipe the
contactors were open and the lamp out. Once the pressure came back with the master controller past the first
position, the contactors stayed open, as they should, and the lamp lit up on a power position, which looked like
the lamp working the other way round.

On the diesel-electrics TMoverParameters::LineContactorsLampLit() now follows the contactors alone; the electric
locomotives and the other main circuit lamps are unchanged.

Tests: tests/unit/test_line_contactors.cpp, on a locomotive made after the SU46.
2026-11-07 14:06:58 +01:00
jerrrrycho
7e426192b7 fix(cab): a diesel with only the starter button stops its engine with the main switch off command (eu07/maszyna#427)
The SM03 had no way to stop its engine. Its fuel pump starts on its own, so the fuel pump switch is ignored; the
engine runs the converter feeding the low voltage circuit, so the battery switch doesn't starve the fuel pump either;
and its cab has only the starter button, for which TTrain::OnCommand_linebreakeropen() kept a legacy branch which
animated the button and returned without opening the circuit. MainSwitch(false) itself stops the engine fine.

The command now opens the circuit on diesels whose cab has only the starter button
(TMoverParameters::MainCircuitOpensWithStarterOnly()), without animating the button, which held down would start
the engine again. Other vehicles with only the button closing the circuit keep ignoring the command.

Tests: tests/unit/test_engine_shutdown.cpp, on a shunter made after the SM03.
2026-11-07 14:06:38 +01:00
jerrrrycho
466cbbbfa1 Test/core unit coverage (#235)
* test: real vehicles and golden traces in the unit tests

The game's own vehicles (dynamic/ of the release used for the tests) as
JSON of what the game's vehicle loader reads of their .fiz files, includes
expanded: test_fiz.cpp converts them on demand and checks the loader reads
the same sections, values and rows as of the game's file (fiz.h). Chosen
to cover every engine type, brake valve, brake handle, local brake,
coupler type, door type and brake delay set the game data uses.

Golden traces (golden.h) characterise the simulation, compared within a
relative tolerance or exactly, re-recorded with
EU07_UNIT_TESTS_UPDATE_GOLDEN=1:
- the parameters of every real vehicle as loaded,
- the brakes of every real vehicle through charge, service steps,
  release, overcharge and emergency, on every brake delay setting,
- every position of every driver's and local brake handle,
- every powered vehicle started up the way the AI does it, driven to
  full power and braked to a stop (drive.h),
- the real electric units and a locomotive with wagons driven whole, as
  trains of coupled vehicles stepped the way the game steps them
  (consist.h),
- scenarios of the controls (scenario.h): doors, reversing and cab
  change, slip and sand, emergency stops, releasers, the ep and the
  electrodynamic brake, heating, loading, a collision, and frames of
  several physics iterations.

* test: commands passed between vehicles

Every command RunCommand knows run on every real vehicle and recorded,
commands travelling through a train with a vehicle facing backwards, a
coupling without the control cable, and loading and unloading by commands.

* test: every switch of the cab, sent to the next vehicle

Each switch sending its state to the train, each way and to each range,
with the controllers and direction among them, on every real vehicle
driving another of its kind, recorded for both.

* test: the switches of the cab worked on a pair under the catenary

The same switches with two seconds for the vehicles to act on each, so
the pantographs rise, the main switch closes and the auxiliaries start.

* test: gauges of trains in multiple and the damage descriptions

The ammeters and the brake force the AI expects, recorded on the electric
units and locomotives in multiple driven, the damage described on the
driver's panel and ammeters showing the current of controlled vehicles.

* test: give load commands their place, as the game does

The loading test set its commands with SetInternalCommand, which leaves
TCommand::Location as it is: uninitialised in a fresh vehicle, so the
distance check of Load= and UnLoad= read garbage and the test failed
now and then. The game gives them through PutCommand with the place of
the platform, and so do the tests now.

* test: brake valves and handles no vehicle of the game data has

Fitted to a wagon and to an EU07: the valve variants and handles the
loader knows that no real vehicle uses, the CV1 ones and the test handle
among them, and a name the loader doesn't know.

* test: braking from speed with the automatic ED brake, and a draisine

Trains with the EP09, the E6ACT and the EW58 braked by ep, light and full
service applications from speed, and the draisine pumped from rest and
rolling. Only the E6ACT brings its electrodynamic brake in here.

* test: the EP09's electrodynamic brake in service braking held to a stop

start_up() took a vehicle for ready once its line breaker was closed and
its reservoir full, which a train made already moving is at once: the
EP09's manually started converter was never switched on, so there was
no 110 V and no electrodynamic brake. It now waits for the converter.

The EP09 with wagons is braked from 120 km/h by light, medium, high and
full service applications held to a stop: the motors brake, the air of
its cylinders is let out and given back as the train slows down. The
flag of the electrodynamic brake stays on at a standstill below 2.1 bar.

C strings given to CAPTURE are shown as text.

* test: the converter switched on before a train is ready, the EW58's ep-staged electrodynamic brake

start_up() called a train ready as soon as its line breaker closed and the air was there, so the converter
of a unit having it in another car than the cab (the EW58's middle car) was never switched on, and its
electrodynamic brake, gated by the 110 V, never came in. The converter and the compressor now always get
switched on first. The EW58 brakes electrically by the stages of the ep brake, not by the pipe alone.

* test: the ET42 and the 214M railbus among the real vehicles

The ET42's halves (its own series motor branch: the motors in series at the high current setting) and the
214MA, a diesel railbus with the hydraulic torque converter, the retarder and the controller of an induction
motor drive, converted from the game data and recorded in every sweep of the real vehicles.

* test: the wagons' hand brakes released with the train's brakes; the 754, SM31 and SU46

release_brakes() released the hand brake of the driver's vehicle only, so every wagon set up braked kept its
hand brake on and got dragged along. It now releases the hand and spring brakes of the whole train, as
TController::AutoRewident() does when the AI takes it over, and the traces of the trains with wagons are
recorded anew.

The 754, the SM31 and the SU46 join the real vehicles for the kinds of the diesel-electrics' field shunting
relays the others lack (RelayType 0, 1 and 46).

* test: traction on a lost and too high catenary voltage, the ET42, the diesel-electrics' shunting relays

The line breaker opened by the voltage relays of a series motor locomotive and by the limits of an induction
motor one. The ET42 at the high current setting, which keeps its halves' motors in series, and its switched
electrodynamic brake, whose current trips the overload relay from the top speed of the low setting. The field
shunting of the diesel-electrics through each kind of their relays, at full power and notched back.

* test: the EW58's electrodynamic brake stages, the EU47's speed control and braking at the voltage's limit

The stages of the EW58's motor brake set by the positions of its ep handle, the first one alone over
100 km/h. The EU47's second controller holding, raising and lowering the speed set, its local brake setting
the flag of the electrodynamic brake without the motors braking, and its brake feeding back less current into
a catenary over the drive's MaxV.

* test: diesel engines too cold and too hot to start, the 214M railbus's controller and retarder

The heat of the diesel engines: at -10 degrees the ones with the lowest water temperature set don't start
until the heater warms them, at 88 degrees the ones with a second water circuit don't start while it cools,
and the SM42 run hot at full power is kept under its highest temperature by its fans and shutters. The 214M
railbus's controller from the air brake through the retarder and neutral to power, its torque converter's
lock-up and its gearbox.

The controller helpers of the traction tests (full power, waiting for the line contactors, and notching back)
move to test::scenario.

* test: couplers coupled, uncoupled, broken and colliding; loads assigned, loaded and unloaded

Coupling by hand touching or apart and of the same kind or not, with the sounds of what changes; uncoupling a
screw coupler pressed together, stretched, with the hoses alone or broken; the automatic couplers of electric
units coupling on contact, without the control cable between two kinds; a coupler broken with its brake
hose; collisions over 15 km/h derailing. The pantographs set up by the pantstate load, a load of one kind at
a time up to the capacity, and the steps of loading and unloading.

* test: the battery drained and charged, the pantographs' tank and pressure switch, the 214M's speed control

The EU07's battery drained without the converter by the lights and the small compressor until it opens the
line breaker and nothing starts, charged by the converter, and switched off. The pantographs on their own
leaking tank until the pressure switch opens the line breaker, and the small compressor pumping it up and
priming the switch. The 214M railbus's speed control set by its buttons, steps and power limit, braking down
with the retarder, and standing by.

* test: the MHZ handles' buttons, the valves at speed, every brake material, the NESt3's relays

The overload and the high pressure buttons of the MHZ handles. The KE and the LSt at speed in the R and P
settings, under the anti-slip request and the releaser button. Every material of the brake shoes and disks
the loader takes, braking a wagon from speed, the ones no game vehicle has among them. The CV1_R and the
Oerlikon valve's relays set by its name (-ED, AL2 without ESt3) fitted to a wagon.

* test: the loader's lists and lines: the 218M, SA134 and 22WEc, a compressor list, Pmax by speed, skipped lines

The 218M (V2NList), the SA134 (HTCList) and the Elf 22WEc (ffBrakeList) join the real vehicles for the lists
the others lack. Definitions made by the tests for what no game file has: a compressor list, whose table of
whole numbers reads a factor of 0.9 as 0; the compressor's limits apart for the rear cab; the highest power
of an induction motor drive by the speed, extrapolated past the table; and the lines the loader skips or
trims (comments, a hash anywhere, leading spaces, carriage returns).

* test: what the cab and the AI call on a vehicle: gauges of the train, the split ED brake, spring brake, cut-off

The engine rotation of up to three vehicles in multiple and the lamps of the overload relay and the starting
resistors read through the control cable; the engine's idle speed and the ET42's second controller shown in
its dynamic brake; the controller of the electrodynamic brake apart from the local brake, which no game
vehicle has yet; the spring brake shut off and released, the ep brake's fuse and the handle stepped by the AI;
damaged motors cut off; the cab activated by itself; a road vehicle moved across a road, for which the tests'
track gets a width; and the lamps and the buzzer of the security system left unattended.

* test: the EP05 and its camshaft among the real vehicles, the headlights' colour and brightness

The EP05, whose camshaft closes the line breaker and the line contactors by the camshaft's own position,
converted from the game data and recorded in every sweep of the real vehicles. The Headlights section, which
only the 214M's own file has, in a definition made by the test.

* test: what the unit tests reach of the simulation core, what's dead or left, and what they found

COVERAGE.md: the blocks of Mover.cpp, hamulce.cpp, Oerlikon_ESt.cpp and friction.cpp the tests run, the code
nothing in the game runs, the code only data no game vehicle has would run, what's reachable and left, and
the behaviour the tests found that may deserve a look.

* test: check invariants of the physics on every step of every golden trace

Rules any vehicle keeps whatever a test does (no NaN, cylinders and pipes
within their limits, no current with the line breaker or contactors open,
no force without power, distance as the speed runs, no acceleration over
5 g), checked on every step, with no comparison to a recorded file. The
traces where a test or a game vehicle breaks one are excused with the
reason; the vehicles' cases are in the findings of COVERAGE.md.

* test: key figures of every golden trace, per part of the run

Duration, speeds, distance, time to stop, the brake pipe's lowest
pressure and time to recover, the peaks of the cylinders, the motor
current and the tractive force, for each part between two events, in
data/golden/<name>.figures. Compared within 0.5% or the last decimal, so
they hold on any compiler, and an intended change of behaviour shows in
a few readable lines. Traces sampled by hand keep none.

* test: keep the golden samples out of the repository, recorded on the code before a change

The samples of the golden traces are 29 MB and only mean something against
the code before the change they check, so they're recorded locally before it
(EU07_UNIT_TESTS_UPDATE_GOLDEN=1) and compared after it, and ignored by git.
The key figures and the invariants stay, and are what the CI checks.

Without samples recorded a trace compares only its key figures, but with
EU07_UNIT_TESTS_GOLDEN_EXACT=1, the check of a change which shouldn't alter
anything, it fails, so the check can't pass by having nothing to compare.

* fix: draw the noise of the control pipe pressure in one order on every compiler

The order of the two Random(10) calls in 'Random(10) - Random(10)' is
unspecified: GCC draws them the other way round than MSVC Release, which
mirrored the control pipe pressure around 5 bar and failed 32 unit tests
on the Linux CI. The draws are sequenced in the order of MSVC Release,
which the golden traces were recorded with.

* test: count the start-up rounds with an integer, not a double (SonarCloud S2193)

* test: behaviour in CHECKs, the key figures out of the repository

The key figures of the golden traces are recorded with their samples on the code
before a change, and compared after it, instead of being kept: a trace without
them checks the invariants and its test's CHECKs, which is what the CI runs.

The scenarios of the controls state what they show in CHECKs, and the runs of
every real vehicle what holds for each of them. Writing them showed scenarios
which didn't do what they were named for: the cab change stopped in the engine
room, the slip runs put the controller to full power at once and never got the
line contactors closed, and the train stopped by the alarm chain never got its
pipe charged again. They do it now; the rest went to the findings.

* test: the SonarCloud findings in the unit tests

std::format for the texts put together, emplace_back, const references, string_view parameters, std::array and std::vector for the C arrays, the ranges algorithms, names no longer shadowing the coupler ends, comments in the empty loops; start_up(), trace::check() and the converter of the definitions split up. BrakeForceR() is const, which it always was in effect, so the gauges test needs no const_cast. The golden traces compare bit for bit.
2026-11-07 12:37:12 +01:00
3f6a10f1fe Merge pull request #237 from MaSzyna-EU07/feat/track-uneven
Feat/track uneven
2026-11-07 11:18:49 +00:00
jerrrrycho
4489dd7469 test(gfx): unit tests of the smoke of a vehicle taken off the tracks (#90)
The spawn count of the smoke source of a vehicle moves out of
smoke_source::update() into smoke::vehicle_spawn_count() (vehicle/smoke.h),
a free function on the mover state, which joins the core library so the
unit tests can call it the way the source does. The rates are the same as
before, the steady rate of the source still counted in before the share of
the engine.

Tests: tests/unit/test_smoke.cpp. A vehicle taken off the tracks spawns no
smoke and drops the pending particles, with the engine starting, idling or
under load; a road vehicle back from the pool puffs again; the engine adds
to the steady rate; the pending count stays within the room of the source.
Two of the four fail without the fix.

Checked again on td.scn with the SM42 driven into a portal: the smoke
source keeps puffing on the run and drops to 0 particles once the vehicle
is taken off the tracks.
2026-11-07 11:38:49 +01:00
jerrrrycho
e0cef91049 fix(physics): running backwards, the camshaft goes back down from the last series position (eu07/maszyna#393) (#256)
Running backwards, AutoRelayCheck() keeps the camshaft from joining the motors in more branches than
BackwardsBranchesAllowed (the series connection alone, by default). It did that by returning before any move of
the camshaft, so once it reached the last series position (22 of 43 in the Skoda 181 and 182, the next one joins
the motors in two branches) it stayed there whatever the driver did with the master controller: with the
controller back at zero the line contactors stayed closed and the motors kept pulling, until the line contactors
were opened by hand. Now the limit only keeps the camshaft from going further up; it goes back down as usual.

Tests: tests/unit/test_camshaft.cpp, on a locomotive made after the Skoda 181 (its RList); the test definitions
take the RList and MotorParamTable0 tables.
2026-11-07 04:48:15 +01:00
pawelw
fc22645d7c fix(physics): articulated couplers stall freight trains (eu07/maszyna#553) (#255)
* fix(physics): articulated couplers stall freight trains (eu07/maszyna#553)

Articulated wagons (T3000e, N-230, N-234) set up with CType=Articulated
barely moved in a freight train and jerked.

- The articulated joint took the spring force up to DmaxC = 0.05 m only,
  225 kN, well short of its FmaxC of 850 kN and of what a loaded section
  in a freight train takes. It overstretched and the sections collided at
  every physics step. Dmax is now sized so the spring carries FmaxC
  (0.19 m stretched, 0.09 m pressed in), never below the old 0.05 m.
- ComputeCollision() scaled the velocities of both vehicles by
  sqrt(1 - beta), so each collision braked the pair as a whole: two
  coupled vehicles in a sustained "collision" lost a third of their speed
  per step. The restitution now applies to the velocities relative to the
  centre of mass only, and the pair keeps its momentum.

Tests: the articulated joint carries FmaxC within its travel; a jerked
articulated set and a jerked screw-coupled pair keep their momentum. On
the code before the fix both pairs stop dead within 3 s.

* style(physics): English-only comment in ComputeCollision()

The comment above the collision velocities started in Polish and went on in English.

* style(physics): SonarQube findings in the #553 fix

std::lerp for the collision velocities (cpp:S6179) and test locals renamed so they no longer shadow the end and coupling enumerators (cpp:S1117).
2026-11-05 10:25:26 +01:00
maj00r
09b1c2de10 fix(utilities): win1250_to_utf8 turns the polish letters into utf-8, not into themselves (#252)
utilities.cpp starts with a byte order mark, so the compiler reads it as utf-8. The game's targets don't get
/utf-8, though: set_target_properties(... COMPILE_OPTIONS ...) in the MSVC block of CMakeLists.txt replaces the
options add_compile_options gave them. So the string literals went into the program in the code page of the
system, windows-1250 on a polish one, and the map of win1250_to_utf8 turned each letter into itself.

What read windows-1250 through it got no utf-8: the names, descriptions and categories of the sceneries and the
names of the textures in the launcher, and the descriptions of the templates in the editor. The editor writes
such a description back through utf8_to_win1250, which makes a question mark of each byte that doesn't start
a utf-8 sequence, so the letters it had read unchanged didn't come back.

The utf-8 sequences are written as bytes now, the way utf8_to_win1250 has them, so they don't depend on the
options. The options stay as they are: with /utf-8 other literals of the files with a byte order mark would
change, the "±" of the table of Bezogonkow would take two bytes and move the letters after it.

The unit tests check the letters and that the text given is valid utf-8.

Co-authored-by: maj00r <maj00r@host>
2026-11-05 03:12:05 +01:00
maj00r
a68c535be9 fix(track): the cab keeps the shake a track doesn't replace, and the editor redraws all that an edit changes
The side sway from the lateral acceleration now goes off only on a track with a sideways value, and the random jolts on one with a vertical or a sideways value. Dips at the rail joints and cross level alone replace neither. On a switch it goes by the path set and what its joined tracks allow.

An edit in the editor also rebuilds the other switches of a joined group with the tracks they meet, and the tracks of a rail run whose joints moved. Removing a track does the same. While dragging, the tracks further off wait until the drag ends.

The clatter of a bogie's axles was right: the followers stand at the pivots and the offsets are the places of the wheel sets. The misleading name goes.

Also what Sonar had left: a parameter as a span, a const method, a struct and its member apart, commented out code, and a function of the grading tool split, with the same output.
2026-11-01 20:12:33 +01:00
jerrrrycho
d995674bee fix(physics): automatic couplers don't catch above the safe collision… (#217)
* fix: automatic coupler crashes, horns, compressor start delay, radio and cab lever sounds

fix(cab): the line contactors lamp goes out with the pressure switch (eu07/maszyna#470)

The lamp of the open line contactors, which tells the start can be made, went out at 1 bar in the brake
cylinders, while the pressure switch cuts the start off only at 2 bar (or below 3.6 bar in the main pipe), so
with the brakes partly applied the start could be made with the lamp out. With a pressure switch fitted the lamp
now follows it; without one it goes out at 1 bar as before. The same holds for the lamp of the second unit, which
used to keep its last state between 1 bar and the cut-off. The condition is
TMoverParameters::LineContactorsLampLit().

Tests: tests/unit/test_line_contactors.cpp.

refactor: Sonar findings of PR 217

- horn_supply::pneumatic shadowed the pneumatic enumerator of the sound flags (cpp:S1117), it's horn_supply::air;
  the supplies read with using enum (S6177),
- CouplerForce(): the automatic coupling refused or caught without another level of nested ifs (S134), the
  same outcome: too fast, the coupling is locked; caught, coupled and locked; otherwise left to try again,
- CompressorCheck(): the power the compressor doesn't draw yet noted without a TODO (S1135),
- tests: the previous crash damage setting in an in-class initializer (S3230), the loops which stop early with
  break rather than in their conditions (S886), the stand-ins of test::pair in a std::vector rather than an array
  (S5945), units in the comments of the example without /* */ (S1103).

test: the cases the changes of the branch left without a test

- Cntrl.: BDelay1 to BDelay4 reach the brake delays (now through std::format), the default start types of the
  ground and converter overload relays of a multiple unit and of other vehicles (out of the nested conditionals),
- the compressor: fed from the low voltage it waits from the low voltage coming on; the pressure switch stops it
  above the cut-out pressure, without one the excess air is vented (the vented fraction rewritten),
- the horns: a vehicle without any air sounds as before, the threshold pressure, an electric horn on 110 V,
- the positions of a cab control below zero, and a control without position sounds.

refactor(cab): the kind of the train heating switch as a flag

Read once with the vehicle definition, rather than compared as text in each of the switch commands.

feat(cab): train heating switch springing back (MaSzyna-EU07/maszyna#85)

TrainHeating=[toggle]|impulse in the Switches: section of the vehicle definition makes the train heating switch
an unstable one: it goes up to switch the heating on, down to switch it off, and back to the middle once let go,
instead of staying where it was put. The position of such a switch isn't set from the heating state when the cab
is entered.

Tests: tests/unit/test_switches.cpp.

feat(sound): mirror sounds (MaSzyna-EU07/maszyna#84, eu07/maszyna#322)

The sound definitions of a vehicle (.mmd) take mirroropen: and mirrorclose:, played as a mirror sets off
unfolding or folding, and the locations section mirrors: <offset>... end, the offsets along the vehicle of the
mirror pairs, as for the doors (negative ahead of the centre), each pair at the sides of the vehicle. As the
animation, only the mirrors at the occupied cab sound. The start of a move is mirror_moves::motion in
vehicle/mirrors.h.

Tests: tests/unit/test_mirrors.cpp.

feat(cab): joint oil and fuel pump switch (MaSzyna-EU07/maszyna#81)

A cab control oilfuelpump_sw: switches both the oil and the fuel pump at once, with the new command
oilfuelpumptoggle (no key by default). As a two-state switch it turns both pumps off when both are on and both on
otherwise; as an impulse switch it's held to start them, like the separate pump switches. Its position follows
the pumps when the cab is entered.

refactor(editor): text fields filled without strncpy (MaSzyna-EU07/maszyna#112)

The last three strncpy calls Sonar flags (cpp:S5816), in the road and track editors, copy the text into the
ImGui field buffers with std::string::copy and terminate it right after; the text gets cut to the buffer as
before.

fix: automatic coupler crashes, horns, compressor start delay, radio and cab lever sounds

- automatic couplers don't catch above the safe collision speed (#86): with crash damage on they couple at a
  closing speed of 15 km/h at most, a faster hit locks the coupling until the vehicles part and the collision
  runs its course. On the way: CollisionVelocity() read a head-on 10 + 10 km/h as 14.1 km/h (quaternions turn
  by half the angle), it's now taken from the touching ends; CollisionDetect() took the other vehicle's speed
  the wrong way round for vehicles facing each other. Head-on hits now derail sooner, at the intended limit,
- a single horn lever can't sound both tones at once (eu07/maszyna#392),
- a skid ends once the vehicle stops on locked wheels (eu07/maszyna#479),
- electronic destination signs are blanked at the end of the timetable (eu07/maszyna#446),
- horns need the air or the voltage to sound (eu07/maszyna#290, #76): HornType=[Pneumatic]|Electric and
  Horn3Type in Cntrl.; a pneumatic horn needs 0.2 MPa in the main reservoir (or the main pipe without one),
  an electric one the low voltage; the lever stays where it was put,
- compressor start delay (#67): CompressorStartDelay [s] in Brake., counted from the compressor getting its
  power, after the engine starts say; none by default,
- the channel and volume buttons of a radio without power do nothing (eu07/maszyna#429); the power check of
  the radio is TMoverParameters::RadioPowered(),
- a lever moved smoothly sounds the positions it passes (#83).

Sonar findings in the functions changed: nesting, nested conditionals, commented-out code, std::format,
references to const. Unit tests: test::pair for two vehicles running into each other, test_couplers,
test_horn, test_wheelslip, test_compressor, test_radio, test_gauge_positions.

* fix: review findings of PR 217

- the pressures of the mover are in bar (MinCP=7.0 in the vehicle definitions), so the 0.2 the pneumatic horns
  needed was 0.2 bar; it's 2 bar now, and the tests take their pressures in bar too,
- the lamps of the ground relay and of the motor overload relays follow the pressure switch as the line
  contactors one does, TMoverParameters::MainCircuitLampsEnabled(), so the lamps of one cab go out together,
- the joint oil and fuel pump switch leaves out a pump started automatically, which ignores the switching:
  with one, it couldn't turn the other off, and showed off with both running (OilFuelPumpsEnabled()),
- the kind of the train heating switch comes from the occupied vehicle on entering the cab too, as in the
  switch commands; in a multiple unit these are different vehicles,
- CouplerForce() put the force taken back by the other vehicle on its far coupler when the vehicles faced each
  other (Couplers[1 - End] rather than the coupler it's coupled with),
- the velocity difference along the coupler axis computed once, CouplerVelocityDifference(), for CouplerForce()
  and CollisionVelocity(),
- the attachcoupler flag added without the SetFlag() call with 0, the index of the mirror moves noted as by side.

Tests: the coupler force of vehicles facing each other, the joint switch with an automatic pump, the lamps of
the main circuit, the horn and compressor pressures in bar.

* fix: coupler force of vehicles facing each other taken back along the other vehicle's axis

CForce runs along the axis of its own vehicle, so the force the other vehicle takes back on its coupler of the pair
is turned around once more when the vehicles face each other (-CF * DirPatch()), as that vehicle computes it itself.

Tests: the coupler forces of the pair facing each other and facing the same way.
2026-11-01 09:12:36 +01:00
maj00r
9364b03e1a fix(track): what Sonar reports on the unevenness
The blockers are in the EP brake of a vehicle, older than this work: its
arrays made with new[] are vectors now, which also removes the deletes.

- The caches of the unevenness of a track are no longer mutable: what fills
  them isn't const any more.
- TSegment gets back to RaPositionGet in one piece, with what the path has
  to do with the others in one struct.
- Less nesting in the group of switches and in the fields of the editor,
  nested conditionals written out, and the attribute is read from a
  string_view. A test no longer counts in floating point.

No change in behaviour.
2026-10-31 20:17:47 +01:00
maj00r
2b8d7d7cf3 refactor(track): what goes with unevenness in one place, readable
The rules stay in TrackUneven.h with no dependence on the engine, as they can
be tested. Their use on the tracks moves out of Track.cpp to TrackUneven.cpp,
split into steps: the group of switches, the values of its paths, the meeting
of two ends. One set of helpers for the paths of a track takes the place of
the same conditions written out in several places, and the value at the ends
of a switch is worked out in one place. The clatter of an axle leaves the long
Update of a vehicle. The fields in the editor say themselves when they show.

No change in behaviour.
2026-10-31 19:05:56 +01:00
maj00r
371de52342 fix(track): what the review of unevenness found in the engine
- A path of no length gave a joint with a vector across of NaN to the path
  joined to it, on any scenery, with unevenness or not. It now has no
  vector across, and so makes no joint.
- Axles no longer stray along the track. It moved vehicles against each
  other, changing the distance their couplers go by.
- The bend under an axle goes straight on past the ends of a path: the
  polynomial ran off on a short curved one, with a kick in the cab shake.
- A track left out of its rail run, where tracks are joined one way only,
  no longer walks the whole run again on every call.
- The clatter of an axle goes by the outer axle on its side of the vehicle,
  and not always by the same one, as the two can be on different tracks.
- A vertex works out the amounts once, and the foot of the ballast not at all.
2026-10-31 19:02:55 +01:00
maj00r
ec2d226688 fix(editor): the uneven attribute is written in the layout of the entry it goes into
Its numbers go by position, and the positions differ between a plain track
and a switch. A switch made in the style of a plain track wrote them in the
layout of the plain one, so they were read back as other values: the up and
down part as the value of the path p3-p4, and so on.

The values are now one struct with pure functions to read, write and resolve
them, which replaces eight fields and which the unit tests can reach.
2026-10-31 18:58:20 +01:00
maj00r
02abc7df0a feat(track): all of the unevenness in one attribute, with values for each path of a switch
Usage, before endtrack, in mm, 0-100, separated by semicolons with no
spaces:

  a plain track:  uneven value;up;side;cross;dip
  a switch:       uneven p1-p2;p3-p4;up p1-p2;side p1-p2;up p3-p4;side p3-p4

  uneven 18           the value alone
  uneven 18;;;25;6    with its own cross level and dip at the joints
  uneven 0;;30        sideways alone
  uneven 14;35        a switch, 14 on the straight path, 35 on the diverging

What's left out takes the first number, the dip goes by the up and down
one, and a path p3-p4 with no numbers of its own takes those of p1-p2.
This replaces unevenup, unevenside, unevencross and jointdip. The fields
in the editor stay, track panel, section Ride and sound.

At the end they share, the paths of a switch keep to the lower value, and
each comes to its own value along the way. Joined switches take the lowest
of the same path, a path joined to another path the lower of the two, and
a plain track comes to the value of the path it meets. See
track_uneven_doc.md.
2026-10-31 18:33:35 +01:00
maj00r
3dbe8a75f8 feat(track): the foot of the ballast stays on the ground as designed
Rails, sleepers and the top of the ballast go with the unevenness, the
slope of the ballast takes up the difference.
2026-10-31 18:27:19 +01:00