mirror of
https://github.com/MaSzyna-EU07/maszyna.git
synced 2026-11-19 23:55:00 +01:00
build-linux-curl
66 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
e6fa206e47 |
Split stack 3-5c into master (switch blades, 3D sleepers, editor core, SRK stations, tutorial) (#289)
* feat(track): the rail code split by concern, the blades of the switches with the key frogs shaped from their templates The rails are laid by code of their own instead of inside Track.cpp: gauge lines (GaugeLine), knot lines (Knots.h), crossings and check rails (RailCrossings), rail materials (RailMaterials), measuring the rail profile (RailProfile), planning the cuts (RailPlan), the carving scan (RailCarve) and laying the geometry (RailLayer). A switch with the key frogs draws its blades from the tip where their planed nose ends to the heel, bent as they're thrown, and the rail behind them from the heel on, where they were laid from the start of the switch before; on a switch of the catalogue they start at the cut tip of the tables, 1.248 m from the joint at R 190, 1.5 m at R 300 (track_features::blades). The frogs cut from the rails, the wing and the check rails are built but switched off (track_features::crossings), the rails laid whole as before. The switches without the key keep the blades they had. A switch path can be a chain of pieces: pieces1 and pieces2 keep the parts of each path after the classic bezier, which stays as the approximation older versions read. A path with its radius given is a curve however gently it bends, a plain track a straight only where both of its control vectors lie along it. A vehicle trailing through a switch with a movable nose set the other way runs off the rails at it (TRAILED_SWITCH). * feat(render): the shared treads of the rails and their cut faces drawn, the cut faces in the matte variants of the rail materials Both renderers draw the treads a track shares with the rails it crosses, in the pick pass too, and a pass of their own for the faces where the rails are cut, the ends of the blades among them, in the matte variants of the rail materials, so the cut faces don't shine like the head the wheels polish. * feat(vehicle): an axle on a switch keeps to the path it came on, and coming from the frog end trails the switch through where the wheels reach the blades The switch thrown under an axle no longer moves it over onto the other path; it runs on along the one it entered. Coming from the frog end, where the blades are shaped or the frog has a movable nose, the switch set the other way is trailed through (rozprucie) only where the wheels get to the blades or to the nose, not as the axle enters the track; the other switches are trailed through as it enters, as before. * fix(track): the tracks drawn straight before, which their second control vector bends now, written to the log The simulator told a straight by the first control vector of a path alone, so a track whose second control vector bent it was drawn straight; now it's a curve. Such a track is named in the log as it loads, so a scenery made counting on the straight can be found: 25 tracks of lk357. Paths with both control vectors along them bend a centimetre or so at most and aren't named. * feat(track): 3D sleepers and switch timbers laid where the simulator makes the ballast, switched off in the build The sleepers of a track running alone are laid square to it, the timbers of the switches and crossings across the tracks running over them, shared by them, of the models set with sleepers3d and sleepers3dplain in eu07.ini; sleepers3dbed tells whether the ballast is laid under them too, lowered so they stick out of it. The layout of a cluster of tracks is worked out once and kept till a track of it changes, in a thread of its own while the simulation runs. timbermodel of a track, read and written back before, takes the place of the model of sleepers3d there. All of it is off whatever eu07.ini sets (track_features::sleepers), the tracks keeping their ballast and their sleeper models. * feat(render): the 3D sleepers and switch timbers drawn in instanced batches Render_Timbers lays the beams of the tracks in range where they're out of date and draws those of a run of tracks of a cell gathered by the model and its part or its level of detail, in as few instanced batches as they fit in; in the shadow pass only those near the camera. A track with them leaves its old sleeper model out. OpenGL 3.3 renderer only. * fix(track): the counts of what's wrong with the sleepers kept safe from the thread laying them, and that thread stopped before what it works with goes The counts of the beams clipped, dropped and off the plane, of the slowest and the biggest cluster, are counted by the thread working out the layouts in the background as well as by the simulation laying a cluster itself, and were plain values written by both; they're atomic now. What the thread keeps the clusters in, their version and the counts were made after the worker, as it first asked for them, and so destroyed before it at the exit while its thread could still be laying a cluster; they're made first now, the worker stopping and joining its thread before they go. The tracks go with the paths of the simulation, made before the worker. * revert(track): a tributary and a track of an unknown type load as before They came in with the rail code from the guards of the editor against crashing, and don't belong with the blades: a track of an unknown type loaded as a normal track of the railway could be joined to it and run on, and a tributary loaded as a river with its first path lost the second one when the editor saved the scenery. Both load as on master again; the place where the editor crashed on them is to be guarded where it is. * fix(track): the tracks drawn straight before named in the log once, as they load, and the paths of the switches with no radius told a straight as before in one term The log of the tracks the second control vector bends now was written each time the segments of a track were made again, as a track with its unevenness loads and as the editor changes or drags a track; it's written only the first time, as the track loads. The paths of a switch or a crossing with no radius keep the rule of master, a straight told by the first control vector alone, its two terms being the same length; they're one term now, with the comment saying so. * fix(track): the thread laying the sleepers stopped as the application exits, and loading no models itself The thread reads the scenery, which the application deletes as it exits well before the statics go: it's stopped and joined first thing in exit() now, the worker destroyed with the statics only where the application exits some other way, and not started again after. The models the beams are made of were loaded by the thread where it didn't find them, through the renderer, out of the thread of the renderer, into a map read by the simulation meanwhile: they're found under a lock now and loaded only by the threads other than it, again for all the tracks whenever a track changed since, before a layout is asked of it. With the 3D sleepers off in the build their settings aren't exported, and a track changed doesn't look for the tracks around to lay their beams again. * feat(track): the 3D sleepers turned on with sleepers3d in eu07.ini, no longer switched off in the build track_features::sleepers is gone: sleepers3d <model> in eu07.ini lays them, none (the default) lays nothing and the tracks keep their ballast, as before. The sleepers3d settings are written back with the others. The editor changes the tracks, so while it's open their sleepers are worked out on the main thread as they're needed, not in the background. * fix(render): only the part of a timber model drawn, not what else the model holds A timber model of parts may hold more than its begin, main and end, as the kits with the fastenings of the rails do. Those were drawn with each part of each timber, in the middle of the track; they aren't laid, so they're skipped now. * fix(track): the 3D sleepers laid only for a renderer which draws them Only the OpenGL 3.3 renderer draws the beams. With another one a track set to them lost its ballast to them, lowered or not laid at all with sleepers3dbed no, and nothing was drawn in its place. Draws_Timbers() of the renderer tells now, and where it's false the tracks keep their ballast, as with sleepers3d none. * fix(render): the submodels of a timber model left as they were after its parts are drawn They were all made visible after a part was drawn, the ones the model hides itself too, like Light_On, while the same model may stand in the scenery. The submodels of the top level besides the parts are listed as the model is loaded, hidden while a part is drawn and given back their own visibility after. The parts have to be at the top level of the model for that; a model with them deeper is logged and drawn whole. Render_Timbers no longer looks the model up under the lock for every run of tracks, the name set is enough there. * fix(render): a vertex whose faces give its texture no direction gets a tangent across its normal, not a NaN one The cut ends of the rails have one spot of the texture on all their corners, so their tangent came out of normalize() as NaN. The normal-mapped shaders then shaded them with a NaN normal: about half of the vertices of the cuts and frogs, and the end faces of the rails. * feat(track): the frogs cut from the rails turned on with frogs in eu07.ini, no longer switched off in the build frogs yes cuts the rails of the plain tracks and of the switches with the key frogs where they cross other rails, into frogs, wing rails and check rails. It's off by default: the rails are laid whole as before, the blades of the switches with the key are shaped still. * refactor(editor): the track mode file split into the files of its tools, the code as it was A pure move, so that the commits after it show what changes in each tool rather than a 4800-line file rewritten. The member functions of editor_mode go to the file the editor of this branch has them in: route, straights, lay, switchplace, switchdrive, switchtool, trackgizmo, and the rest stays in editormodetrack.cpp. The helpers of its anonymous namespace go to editormodetrackshared.h, as they were but inline, in namespace track_mode, which the files use. No line of code changes; the files add only their license, includes and the using line. * feat(editor): the groundwork the tools of the editor share - The tool interface (editortool.h), the gestures of the mouse (editorgestures.h) and what the modes share (editormodeshared.h); the projection, viewport, selection and texture picking taking them up. - Scripted input (scriptedinput): the input of a selftest script fed to the editor as if typed and clicked, the real mouse and keyboard ignored meanwhile; EU07_EDITOR_SELFTEST_HIDDEN draws into a window never shown nor focused. - The ui layers and panels of the editor, its settings, icons and the info of the includes; the layers of the scenery and their saving; the launcher mode. - utilities: user_cache_path (the cache folder of the system for the user) and the helpers of the translations. - stb_image: the gif loader takes the frame two back from the frames it decoded, not from before its buffer. - tools/editor: the scripts making the headers of the drives, the turntables, the editor and its usage. - Unit tests: test_area and the stubs of the editor the tests link. Not built on its own: the tree builds again with the selftests commit, the one before the translation. * feat(editor): the tracks laid along an alignment, to the PKP PLK norms, with their grade line and the ground - The alignment of the laying (editorAlignment, editorAlignmentStore): straights, transition curves and arcs with the cant of the norms for the speed, the radius below the minimum for it a warning; the lay, route and straights tools build on it, the route plan reading the curves going on from the tracks adjoining. - The grade line (editorProfile, the profile and gradeline tools): fitted to the terrain model or edited by hand, the tracks fitted marked in the scenery (//$f), the shared grade lines of nearly parallel tracks (//$n). - The ground under the tracks (editorGroundFollow, trackbed): the terrain drawn to the tracks and restored, the tracks put onto the terrain. - Connections between tracks (editorConnections, the connection and connection curve tools), the track presets, the shape of a track (editorTrackShape), digitizing tracks from the orthophoto, the properties sheet of the tracks (trackprops) and the track ux. - Unit tests: alignment, ground fit, heights, with the data of two fits. Not built on its own: the tree builds again with the selftests commit, the one before the translation. * feat(editor): the switches placed, slid and designed from their templates - The switch templates (editorSwitchStore, the template tool): the catalogue switches and the user's own, kept with the settings; the designer (editorSwitchDesign) with a drawing of the dimensions, a and b typed in with the shape making up the rest, a switch clicked off the orthophoto. - The curve of a switch laid into a curve (editorSwitchCurve), placement on a straight or into a curve, slide along it, crossovers and double slips (switchplace, switchslide), the drives of the switches (switchdrive) and the records of the switches placed (records). - Unit tests: test_switch_curve. Not built on its own: the tree builds again with the selftests commit, the one before the translation. * feat(editor): the tools of the infrastructure beside the tracks The gauge, speed, joints, lineside, parallel tracks, vehicles, signals, turntables, sweep and road tools with headers of their own; the kilometrage of the lines (editorKilometrage, the km tool); the infrastructure, roads and speeds behind them (editorInfra, editorRoad, editorSpeed). Not built on its own: the tree builds again with the selftests commit, the one before the translation. * feat(editor): the terrain model of geoportal.gov.pl and the orthophoto downloaded for the editor - editorNmt: the squares of the terrain model at 1 m (NMT GRID1, the WCS service of geoportal.gov.pl) fetched by two workers, kept in editor/cache/nmt/grid1 of the game folder, the heights of the scenery taken from them; the nmt mode loads it along the tracks or around the camera. - editorHttp: the HTTP client of both, WinHTTP on Windows, libcurl elsewhere where it's built with it; without it the caches only. - The orthophoto: its cache moved to the cache folder of the system for the user, the download area a polygon on the topo map (//$a) filled in the background, the 4K imagery, the tiles waiting outlined on the ground. - editorGeoMap: the topo map of the top view; heightmapterrain and the terrain streamer grow the terrain made from the model around the camera. Not built on its own: the tree builds again with the selftests commit, the one before the translation. * feat(launcher): the scenery wizard picks the place of a new scenery on the topo map the editor shares The wizard drops its own map download and decoding for the topo map widget of the editor (editorGeoMap). The place clicked becomes the geographic reference of the new scenery (//$g PUWG1992), and the scenery starts with the orthophoto of the editor on (//$o), lying under it in place. Not built on its own: the tree builds again with the selftests commit, the one before the translation. * feat(editor): the tools wired into the editor mode and the build editor_mode takes the tools of the commits before: its header declares them, editormode.cpp and the track mode drive them, and the renderers draw their overlays (opengl33 and legacy). CMakeLists lists the new sources and adds WITH_EDITOR_SELFTESTS (off by default); the unit tests build the new test files. Not built on its own: the tree builds again with the selftests commit, the one before the translation. * feat(editor): the selftests of the editor split by what they test The scripts of EU07_EDITOR_SELFTEST run the commands of editormodeselftest*.cpp: scene, track, rails, join, switch, signal, sleepers, sweep, terrain, monkey. The code is in every build; only with WITH_EDITOR_SELFTESTS=ON does the editor read the variables and run a script. The selftests of master now need the option too. The tree builds again with this commit. * feat(editor): the Polish texts of the editor, all of them in one update of editor_pl.po * fix(editor): the marks of the editor moved off the letters the starters read, and its lines told by their words The starters read some letters in a scenery file: the Starter the title //$n, the attachments //$f and the old scenery //$a, StarterNG and the launcher of the game the attachments //$f and the title //$n. The editor wrote its download area, shared grade lines and fitted tracks under them, and took every line of those marks as its own: saved, a scenery lost its title and attachments, and the starters showed the lines of the editor as them. - The download area is //$z, the shared grade lines //$w, the fitted tracks //$t. - Their lines and those of //$o are told by their first words, as //$h, //$r and //$k were: //$o only as "on 0" or "on 1", the origin or the settings of older builds after it, so a trainset described as "on ..." isn't taken. - The lines older builds wrote under //$a, //$n and //$f are read only by the words the editor wrote in them, or by its own comment line before them, under the new mark. Each save writes them again with it, also when the editor didn't change them; the lines of the starters stay. * fix(editor): a square of the terrain model cut short isn't read, and the squares are kept in the user's cache The service puts the directory of its GeoTIFF before the pixels, so a file cut short by a write or a fetch broken off was read whole, the pixels missing coming out as heights of 0 m, for good. - The reader (editorGeoTiff.hpp, with unit tests) wants all the strips the rows need, each within the file. - A square is written under a name of its own and renamed. - The squares are kept in the user's cache folder (nmt/grid1), as the orthophoto, since the game folder may not be writable; without one, in the game folder as before. The ones older builds kept there are moved over as each is asked for, a damaged one deleted. - Capabilities that didn't come aren't kept as the fallback name for the session: the next square asks again. * chore(editor): the http client said to serve the terrain model and the topo map too, the gif fix of stb_image marked local - CMake names the orthophoto, the terrain model and the topo map as what goes without libcurl. - The fix of the gif frame two back in stb_image is ours, not upstream's (v2.30 still has the old line): a comment at the line says so, for an update of stb_image to keep it. * fix(editor): the lines moved off the letters of the starters in a merged layer written once, not again with each save A merged layer's text goes into the file of its target on save, and the target is read again; the marked lines of the merged layer were dropped only for the marks the editor had changed. The lines moved to the new letters stayed with their old places, and the next save of the session wrote them into the target once more. - After a save, the marked lines of every merged layer are dropped; those of its target are read again from its file. - The lines of a dead layer aren't written again. - The selftest layermerge merges the layer of one file into another's, as the layers panel does. * feat(editor): the station as the signalling sees it, found from a switch of it, and its schematic editorStation: the switches joined by plain track no longer than 1.5 km, the tracks between them and the lines leading out, 400 m of each beyond the outermost switch; laid out as a schematic along the main track through the station. The track circuits, the signals and their lights, the lengths of the station tracks and the lines to the next stations are worked out from it for the signalling tool. Nothing uses it yet: the signalling tool, wired in the next commit, does. It builds on its own. * feat(editor): the signalling of a station in the Signalling tab, laid out from a switch of it as on the lines of PKP PLK LMB on a switch in the Signalling tab opens its station: the schematic in a window of its own, the name, the code, the line and the km of the station, and the steps of its signalling, each one step of undo: - the switches numbered along the station after its code, bpd_1, the parts of a slip bpd_15a..d; the drives and the objects naming a switch follow it, events written by hand keep the old names; - the tracks cut at the joints of the track circuits, Ie-4, and the circuits named, bpd_iz1, bpd_it1; - the entry, exit and shunting signals placed and named, A, F1, Tm1, from the templates chosen; - the signals of the lines out: the automatic block of three or four aspects, the block sections no shorter than the braking distance, or the semi-automatic one with a warning disc; block boundaries drawn by hand; - the lights each signal needs for its routes, Ie-1 and Ie-4 § 8, its template fitted to them; - the SHP track resonators the signals lack, rezonator.inc; - the lengths of the station tracks as a table, and what the station and its lines still lack, with Repair. The stations described are kept as //$s lines in the files of their layers. * fix(editor): the signals of a station and of its lines not placed with no template for a kind, no track cut for them first - Set the signals and Set the line signals cut the tracks first, and only then found no template for a kind. They stopped there, but the cuts stayed as a step of undo. Now they ask for the templates first, by the lookup signal_batch() uses (signal_template_for(), behind editor_signals::signal_templates_missing()). Without one nothing is cut. - Set the signals and Set the track circuits again under Track lengths had the ids of the buttons of the steps above them. ImGui flagged them when hovered. Each now has an id of its own. * fix(utilities): win1250_to_utf8 turns the polish letters into utf-8, not into themselves utilities.cpp starts with a byte order mark, so the compiler reads it as utf-8. The game's targets don't get /utf-8, though: set_target_properties(... COMPILE_OPTIONS ...) in the MSVC block of CMakeLists.txt replaces the options add_compile_options gave them. So the string literals went into the program in the code page of the system, windows-1250 on a polish one, and the map of win1250_to_utf8 turned each letter into itself. What read windows-1250 through it got no utf-8: the names, descriptions and categories of the sceneries and the names of the textures in the launcher, and the descriptions of the templates in the editor. The editor writes such a description back through utf8_to_win1250, which makes a question mark of each byte that doesn't start a utf-8 sequence, so the letters it had read unchanged didn't come back. The utf-8 sequences are written as bytes now, the way utf8_to_win1250 has them, so they don't depend on the options. The options stay as they are: with /utf-8 other literals of the files with a byte order mark would change, the "±" of the table of Bezogonkow would take two bytes and move the letters after it. The unit tests check the letters and that the text given is valid utf-8. (cherry picked from commit |
||
|
|
5bac4e1cf1 |
Fix the four issues failing the Sonar quality gate on master (#323)
* fix(scripting): forward the object in push_object of the Lua screens (cpp:S5417) push_object takes a forwarding reference and called std::move on it, which SonarCloud reports as a blocker bug. It only worked because every caller passes an rvalue: with an lvalue Type_ is deduced as a reference, and new Type_(std::move(Object)) doesn't even compile. The object is now forwarded, and the userdata is sized and built for std::remove_cvref_t<Type_>, the type collect<> and check_object<> are used with: an rvalue is moved in, an lvalue would be copied. Every caller passes an rvalue of lua_image, bitmap_font or glyph, so they move the object in exactly as before. * fix(simulation): turbidity from the overcast without branches of the same value (cpp:S3923) The chain of conditionals setting Global.fTurbidity had pairs of branches with the same result (<= 0.10 and <= 0.20 both 4, and so on, the last two both 9), which SonarCloud reports as a bug. The thresholds that changed nothing are gone and the mapping is a small function: up to 0.20 gives 4, up to 0.40 5, up to 0.60 6, up to 0.70 7, up to 0.80 8, anything else 9. The comparisons are the same ones, in the same order, so every overcast value gives the turbidity it gave before. * test: script screen tests keep their files in the build folder, not in the temporary one (cpp:S5443) The folders of the script screen host tests were made in the system's temporary directory, and the sandbox test put its "outside.txt" straight into that directory. SonarCloud reports both uses as vulnerabilities: the directory is writable by everyone. The folders are now made in the build folder of the unit tests, passed to them as EU07_UNIT_TESTS_SCRATCH, the way EU07_UNIT_TESTS_DATA is. The scripts are one level down in the folder of a test, so the file the sandbox test puts outside the folder of the scripts is still inside the folder of the test and goes with it. Nothing depends on the working directory, and nothing is left behind. |
||
|
|
b251b6fe42 |
feat(blackbox): a black box of the session: the run, the cab, the signals and the stations to a file (#322)
* feat(blackbox): a recorder of the run, the cab, the signals and the stations to a file With the physics logs on (and the new eu07.ini setting blackbox, on by default), the simulator writes a black box of the session to physicslog/*.blackbox: the scenery map (tracks, signals, W4 stop points with their heading, W6 horn points), the timetables of the user's train, and at 10 Hz the cab of the vehicle the user sits in (speed, controllers, brakes, pressures, lights with the pattern the run asks for, the movement kind), the AI's reference for the same place (target speed, next limit, braking distance), the consist, the cameras and the vehicles around. Changes go in as they happen: switches, signal aspects, commands, signals passed with their aspect, stations stopped at, passed or missed, horn requests, the autopilot switched on or off, couplings and vehicles removed. The driving aid's next speed limit moved from the UI panel to TController::next_speed_limit(), so the panel and the recorder read the same. The format is described in blackbox_doc.md; the writer and the reader of the records have unit tests. * fix(blackbox): the aspect a signal had when passed, the lamps the ends have, vehicles taken off - A passed signal is written with the aspect the train had of it, kept in the speed table, not the one its memory cell shows when the pass is noticed: by then the train itself on the track behind has often set it to stop, and most passes were written as at stop. - The cab record gains the lamps the vehicles at the head and the tail have at their outer ends (136 bytes), so a reader can check the light pattern against them as the driver does (no upper headlight, the auxiliary lamps, the rear-end signals only). - A vehicle taken off the scenery and still pointed at by a coupler or the camera gets no new number; the camera lets go of it. - The timetable written before a station goes under the vehicle the user is in now, not the one of the last look. - The file buffer is given once the file is open: MSVC passed over one given before. - The doc tells the AI fields before the consist is started and when entering a vehicle is a driver change. * fix(blackbox): the stop of an automatic block signal passed is written as a stop The speed table keeps the stop of an automatic block signal (SetVelocity 0 x) as the speed allowed after it, with spStopOnSBL; a pass of it was written as that speed with no flag. It is written as 0 with the flag of an automatic block stop again. * feat(blackbox): the doors, the brakes of the whole train, a diesel's engine and the rest of the cab The cab record grows from 136 to 190 bytes, so that a reader can check everything the driver did: - the doors: the permits on each side, the departure signal, the steps, the door lock and whether the doors are locked; - the brakes: the equalizing reservoir of the driver's valve, the main reservoir pipe, the highest brake cylinder pressure of the train, the hand brake, the releaser, the setting (G/P/R/Mg) and the mode (PS/PN/EP/MED); - what drives the vehicle (electric, induction, diesel, diesel-electric, steam, none), its power, a diesel's oil pressure, water, oil and engine temperatures, overheating, fuel and oil pumps, clutch and torque converter, the motor fans; - the cruise control and its speed, the integrated driving handle of a unit, the radio channel, the horn's tones. New device bits use the upper half of the 32-bit field; the new fields come at the end of the record, so older readers still read it. * fix(blackbox): the driver's valve field is what its gauge shows, the radio channel has no none Handle->GetCP() is the equalizing reservoir of most valves but the time reservoir of the FV4a, empty but after an overcharge: the field is named and documented as what the valve shows. With no driver the radio channel reads as the first one, not 0. --------- Co-authored-by: maj00r <maj00r@host> |
||
| aba8687678 | feat(ui): repair the broken coupler next to the camera from the driving aid | |||
|
|
8fb596f218 |
fix(simulation): any exception ends a test run with error, other runs as on master
main() tells a test run (--test) apart before anything runs. Only a test run catches every exception and installs a std::terminate handler, both ending the run with the error code and a test: line; any other run keeps master's exception handling, so on Linux an uncaught runtime_error aborts at the throw site again. A test run doesn't start the Discord RPC thread: it published the test scenery as the player's presence and held the closing up to 5 s. run.py drops a case scenery's .sbt cache after a run cut short (wall_timeout, error, a crash, killed by run.py), which could have been writing it. The -edit branch of the test command line parser had no effect (a token that isn't an option is ignored either way) and is gone; its test checks what can be seen instead. |
||
|
|
e5aafd154f |
feat(simulation): the pass and the standstill wait for the train under test only
Both waited for every vehicle of the scenery to stand still, so on a scenery with AI traffic a test could pass only when the traffic happened to stand too, and the standstill end hardly ever came. A test scenery names the train under test with test.vehicle <name> in its config block (once for each train, if several): the pass and the standstill wait for the consists of these vehicles as they are at the moment, so a train the tested one couples to counts with it. A name the scenery doesn't have ends the test with the error code. Without test.vehicle every vehicle counts, as before. A signal passed at danger counts for every train either way. run.py puts the case's lead vehicle into test.vehicle. test_mode_standstill_traffic has the train under test standing on track 2 of Stacja1 while AI traffic leaves track 1 on the timetable: it ends on its 100 s standstill, where counting every vehicle runs into the 300 s timeout. Physicslogs of the other trains of a case (<something>_<vehicle>) are moved out of the game dir too. |
||
|
|
03a417c7b0 |
feat(simulation): a real time watchdog ends a test run that hangs
A test run that hung, in the loading or anywhere else, waited until whoever started it killed it. A watchdog thread now ends a run still going test.wall_timeout seconds of real time after the start of the simulator, loading included: it says `test: timeout ... still running after N s of real time` and quits with the timeout code, whatever the main thread is doing, with no dialog. A test that has ended but whose simulator doesn't close ends with its own result. The limit is test.wall_timeout (settings, the scenery's config block) or --test-wall-timeout, which wins. Not given, it is test.timeout + 600 s: ten minutes for the loading, and a simulation that runs at least as fast as real time is never cut short. test.timeout 0 means no watchdog unless the limit is given; test.wall_timeout 0 turns it off. run.py passes the case's timeout as --test-wall-timeout and kills a simulator only 30 s after it. A timeout from the watchdog counts as wall_timeout there, so a run that hung doesn't pass a case expecting the simulation time to run out; test_mode_wall_timeout ends while loading on a limit of 2 s. |
||
|
|
1626df2bc4 |
fix(simulation): a scenery's config block can't turn back on what a test keeps off
The config block of a scenery is read like the settings files, after the test mode settings were applied, so a scenery with soundenabled, multiplayer, execonexit, feedbackmode or the like in it got them back in a test run. The test mode settings now are applied again after each config block of the scenery; apply_test_mode_settings() moved to simulationtest.cpp for that. |
||
|
|
baf6bc2a20 |
feat(simulation): the test mode's exit codes keep clear of 1 and 3
1 is what a process killed with TerminateProcess (and the plain failure of most programs) ends with, 3 what abort() ends with on Windows, so a fail or a timeout couldn't be told from a run that was killed or blew up. The codes other than pass now are 10 fail, 11 signal passed at danger, 12 timeout, 13 standstill and 14 error: none of them a code a process gets on its own, neither the shells' 126-127 nor 128 + a signal number on Linux. pass stays 0. |
||
|
|
486a714f52 |
refactor(simulation): the rules of the test mode in a file of their own, with unit tests
The command line options of the test mode and the end conditions checked after each frame are now plain functions in simulation/simulationtestrules.cpp, which needs nothing of the running simulation: parse_test_command_line() and evaluate_frame(). The file is part of the core library, so the unit tests check them (tests/unit/test_test_mode.cpp): the --test-timeout value, values of other options not taken for options, a pass that waits for the stop, the standstill, the timeout. test_manager only gathers what a frame brought and acts on the verdict. No change in behaviour. |
||
|
|
491ed3e6da | Merge remote-tracking branch 'origin/master' into feat/exe-test-mode | ||
|
|
4356e7c3fd |
fix(simulation): a test run that can't start ends with the error code and says why
- `--test` is looked for before the rest of the command line is read. An unknown option before it (e.g. `-s x.scn --test-timout 90 --test`) used to end the run with exit code 0, which a caller reads as a pass. - `--test-timeout` without a value, or with one that isn't a number of seconds, fails the run instead of leaving the default or, through atof, turning the timeout off. - These, a missing -s, a failed start and an exception caught in main() end the test through test_manager::conclude(), which writes the usual `test: error (exit code 5) ... : <reason>` line to stdout and the log. Before, `eu07 --test` alone exited with 5 and nothing anywhere: the error went to the log queue and the process ended before the log thread wrote it. In test mode main() now stops the log thread and waits for it before _Exit(). Outside the test mode nothing changes: conclude() does nothing there. |
||
|
|
547706b54d |
refactor(simulation): fix the Sonar remarks on the test mode code
- TController::TableCheck() calls TSpeedPos::Update() as it did before the test mode: the check for a signal passed at danger is a call of its own after it (CheckSignalPassedAtDanger), so the update lines nest no deeper than on master (S134). A switch is a track, so a signal's update never takes the switch-change branch and the check runs in the same place as before; the physicslogs of all 15 scenario cases are byte for byte the same. - null_imgui_renderer is final (S1235), to_string(test_result) uses `using enum` (S6177), init_result_cell() is const (S5817), ConfigParseTest() takes a std::string_view (S6009) and the test settings struct is declared apart from its member (S3646). |
||
| dad5a32f36 |
Merge pull request #227 from dos1/turbidity
simulationenvironment: Adjust turbidity values |
|||
|
|
6ccf4b14bf |
feat(simulation): test.no_movement_before_pass, a pass that doesn't wait for a stop
The config key from eu07/maszyna#541. By default (yes) a pass reported to __test.result waits until every vehicle has stood still for 1 s; with no it ends the test at once. The key is listed with the other test.* settings in the log and in the test start line. Scenario tests: new case test_mode_pass_while_moving reports the pass from event2 of tor1k as the train runs onto it and checks the run ended with the train still moving (new check ends_moving). The README lists the test.* keys with their defaults and the input the test mode ignores. |
||
|
|
441caeed64 |
refactor(simulation): tidy the test mode code
The test manager is reached through simulation::test() instead of a global, the result cell is owned by a unique_ptr until the memory table takes it, the cell value is compared with a margin, strings are built with std::format and the --test settings moved to apply_test_mode_settings(). The driver's signal check is folded into UpdateSpeedPosition(), which updates a speed table entry and reports a signal at stop the head of the train just passed. The test.* keys are listed with the other settings at the start of the log. |
||
|
|
02e29f6971 |
feat(simulation): test mode, --test runs a scenery unattended and exits with the result (eu07/maszyna#541)
eu07 --test -s <scenery> [--test-timeout <s>] runs the scenery in ghostview with
the null renderer (models loaded, no textures), a hidden window, no sound,
network or python, and in fixed steps of 0.03 s of simulation time per frame
(three 10 ms physics steps) as fast as it can. Without -seed it uses a fixed
seed, so two runs give byte-identical physicslogs.
The scenery reports its result to the __test.result memory cell, which the
simulator always creates: value 1 passes once every vehicle has stood still for
1 s, value 0 fails at once. The run ends with exit code
0 pass, 1 fail,
2 a train passed a signal at stop (SetVelocity 0 0, as seen in its driver's
speed table; SetVelocity 0 x on automatic block doesn't count),
3 timeout (test.timeout, default 3600 s of simulation time),
4 standstill (every vehicle still for test.standstill s, default 300, with no
result; a pass with test.pass_on_standstill yes),
5 error (no -s, the scenery didn't load or has no vehicles, an exception).
The test.* keys go in the scenery's config block; test.fail_if_stop_overran no
only logs a signal passed at danger. Outside the test mode a signal passed at
danger is logged.
The null renderer gets a ui backend which draws nothing, hands out the null
texture and material instead of throwing, and ends the ui frame. A GL context
is still made for the hidden window, without asking for a version, as parts
of the ui create textures with gl calls of their own. No crash dialog or
message box in test mode; the window code no longer needs a monitor.
|
||
|
|
3a29a165a9 |
simulationenvironment: Don't multiply fog color by diffuselevel (#229)
It can easily make the fog too dark compared to the environment, producing a "fire in the forest" effect. |
||
|
|
a6778c9fe2 |
refactor: the Sonar remarks on the small fixes taken care of
- the log stops through a flag kept in a function, not a global one - the messages are put together with std::format - a vehicle dropped on a trainset in the launcher goes in once the trainset is drawn, so the vehicles are gone through with a plain loop again; the drop split into a new vehicle and a moved one - the scenario that can't be opened is caught as the runtime error it is, a file name outside of the code page as the system error it is - a track of an unknown type is left out through the pointer owning it - the keyword of a track type written out by a function of its own - the picked node forgotten with ranges::replace_if, the empty Forget_Node of the base renderer told why it is empty - FileCased takes the path it works on |
||
|
|
8523316006 |
fix(track): a tributary loads as a river of its first path keeping the second, a track of an unknown type is left out, where both made the simulator fall over as it loaded
On master neither got a segment: update_location() dereferenced the missing one of a track of an unknown type, and a tributary went to Switch(0), which logged "Cannot switch normal track", with no segment under it either. A tributary is now a river of its first path. Its second path is kept in m_paths, isn't drawn nor run on, and is written back with the type "tributary". A track of an unknown type is logged and left out by the loader; as it is no node, its text stays in the file when the editor saves the scenery. |
||
|
|
e230d7b902 |
fix: a deleted model is no longer the picked node, an orthophoto tile isn't swept as a grey stub, the ED brake arrays freed
Deleting a model in the editor left the renderer holding it as the picked node, the next pick used freed memory: the renderer forgets it now (Forget_Node). A texture filled straight from memory (internalsrc:) can't be read again, released by the garbage sweep it came back grey; it stays now, and the units bound with the old name are rebound. The arrays of the ED brake force sharing are vectors, they leaked once per update. The scene hierarchy and the editor menu items go through the translation. Python caches ignored. |
||
|
|
842b768803 |
simulationenvironment: Adjust turbidity values
Turbidity 3 breaks the model at night. Adjust the values to have them work well all the time and to maximize variation between cloud states. |
||
|
|
6263fe539b |
Fix/sonar maintainability rebased (#209)
* refactor(sonar): use override instead of redundant virtual (cpp:S3471) * refactor(sonar): remove empty statements, one declaration per statement (cpp:S1116, cpp:S1659) * refactor(sonar): drop redundant lambda return types (cpp:S3574) * refactor(sonar): prefer using over typedef (cpp:S5416) * refactor(sonar): use =default for trivial special members (cpp:S3490) * refactor(sonar): use nullptr literal (cpp:S4962) * refactor(sonar): remove redundant access specifiers (cpp:S3539) * refactor(sonar): remove redundant casts (cpp:S1905) * refactor(sonar): use std::scoped_lock instead of std::lock_guard (cpp:S5997) * refactor(sonar): construct elements in place with emplace_back (cpp:S6003) * refactor(sonar): make narrowing conversions explicit (cpp:S5276) * refactor(sonar): mark unused parameters (cpp:S1172) Unused names are commented out; parameters used only on some platforms are marked [[maybe_unused]]. * refactor(sonar): declare non-mutating member functions const (cpp:S5817) Virtual functions are left untouched so overrides keep matching. * refactor(sonar): merge collapsible nested if statements (cpp:S1066) Comments that preceded the inner if are kept above the merged statement. * refactor(sonar): scope single-use variables in if init-statements (cpp:S6004) * fix(sonar): give polymorphic base classes virtual destructors (cpp:S1235) * refactor(sonar): use try_emplace for map insertion (cpp:S6030) * refactor(sonar): use auto where the type is spelled out on the right (cpp:S5827) * refactor(sonar): remove redundant parentheses (cpp:S1110) * refactor(sonar): document intentionally empty functions (cpp:S1186) * refactor(sonar): remove dead stores (cpp:S1854) Side effects (e.g. LISTLINE++) are kept. * refactor(sonar): remove unused variables, captures and private fields (cpp:S1481, cpp:S1068) * refactor(sonar): use structured bindings for pair access (cpp:S6005) * refactor(sonar): use range-based loops and ranges algorithms (cpp:S5566) * refactor(sonar): split chained assignments (cpp:S1121) * refactor(sonar): add default cases to switch statements (cpp:S3562) * refactor(sonar): use std::size for array lengths (cpp:S7127) * refactor(sonar): use std::ranges algorithms and std::erase(_if) (cpp:S6197) * refactor(sonar): access static members through the class (cpp:S2209) * refactor(sonar): add braces around nested if-else (cpp:S5261) * refactor(sonar): avoid side effects inside typeid operands (cpp:S5279) * refactor(sonar): drop top-level const from by-value return types (cpp:S5951) * refactor(sonar): declare variables separately from their type definitions (cpp:S3646) * refactor(sonar): declare loop counters in the for statement (cpp:S5955) * refactor(sonar): rely on class template argument deduction (cpp:S6012) * refactor(sonar): inherit base constructors instead of forwarding them (cpp:S5952) * refactor(sonar): rename locals that shadow outer declarations (cpp:S1117) Only local variables and definition parameters are renamed; shadowing struct fields and enumerators in headers are left for a separate change. * refactor(sonar): reduce enum qualification with using enum (cpp:S6177) Applied only where no unqualified name in the block could be captured by the introduced enumerators. * refactor(sonar): mark converting constructors explicit (cpp:S1709) sound_source and the gl::object conversion operators stay implicit; they are relied upon by copy-list-initialisation and GL calls. * refactor(sonar): initialise members in initialiser lists or declarations (cpp:S3230) * refactor(sonar): make read-only local references and pointers const (cpp:S5350) * refactor(sonar): take read-only pointer and reference parameters as const (cpp:S995) TTrain command handlers keep their signature, it is fixed by the handler table. * refactor(sonar): pass expensive-to-copy parameters by const reference (cpp:S1238) Signatures declared in files touched by PR 206 (Driver.h, EU07.cpp) and virtual overrides are left unchanged. * refactor(sonar): use transparent comparators for string-keyed maps (cpp:S6045) std::unordered_map instances and map types exposed in headers used by other modules are left as they are. * fix(sonar): do not use UI text as a printf format string (cpp:S5281) Text lines containing '%' would otherwise be interpreted as format specifiers by ImGui::TextColored. * refactor(sonar): use std::bind_front for callbacks (cpp:S5995) * refactor(sonar): drop const_cast on string literals passed to the Python C API (cpp:S859) * refactor(sonar): take read-only string parameters as std::string_view (cpp:S6009) The Windows messaging helpers keep std::string, they need c_str(). * refactor(sonar): make read-only global tables const (cpp:S5421) Mutable global state (flags, timers, singletons) is left as is. * refactor(sonar): replace single-case switch statements with if (cpp:S1301) * refactor(sonar): format UUIDs and log timestamps with std::format (cpp:S6494, cpp:S5945) * refactor(sonar): use std::array for local fixed-size arrays (cpp:S5945) Arrays that are class members or part of headers are left unchanged. * fix(sonar): test the bearing damage bit, not bit 0 (cpp:S872) 'DamageFlag & dtrain_bearing > 0' parsed as 'DamageFlag & (dtrain_bearing > 0)', i.e. DamageFlag & 1, so bearing friction reacted to the wrong damage flag. * refactor(sonar): assorted small fixes - empty() instead of size() comparisons (cpp:S1155) - member initialisers in declaration order (cpp:S3229) - no redundant c_str() when a std::string is accepted (cpp:S7121) - contains() on associative containers (cpp:S6171) - const reference instead of a copying range-for (cpp:S6032) - starts_with() for prefix checks (cpp:S6178) - no std::move on temporaries (cpp:S5274) - has_value() on std::optional (cpp:S7172) - bool literals for bool members (cpp:S5820) - inline only on the definition (cpp:S3548) - explicit base access specifier (cpp:S5965) - explicit element access instead of dereferencing an array (cpp:S7116) - rely on the C++20 rewritten operator!= (cpp:S6186) * refactor(sonar): more small fixes - std::format instead of iostream manipulators in to_string/to_hex_str (cpp:S6495); output verified identical, negative hex values keep the unsigned form - remove an empty compound statement (cpp:S108) - drop an always-false unsigned < 0 branch (cpp:S1768) - explicit lambda capture (cpp:S3608) - std::make_unique (cpp:S5950) * chore: strip stray carriage returns left in TTrain constructor comments * fix: keep quantize() in its own value type The S5276 change cast the result of the generic quantize<Type_>() to unsigned int, which truncated float/double callers (shadow angle slider, editor rotation snapping, AI speed control steps) and broke negative values. * fix(sonar): use integer loop counters in segment sampling (cpp:S2193) * refactor(sonar): clean up issues reported on PR 209 - remove locals left unused after the dead-store cleanup (cpp:S1481, cpp:S1854) - unnamed unused parameter (cpp:S1172) - single-use declarations moved into if init-statements (cpp:S6004) - auto for casted initialisers (cpp:S5827) - const references and pointers where nothing is modified (cpp:S5350) - rename structured bindings shadowed by inner declarations (cpp:S1117) |
||
| 8cd0bab27b |
Editor terrain: texture browser, undo, conversion from terrain files
- Terrain work mode shows a browser of the textures folder in place of the node bank; textures/materials can be dragged onto the palette entries (replacing the material), the material field and the water material field - Ctrl+Z/Ctrl+Y for heightmap terrain changes: a brush stroke or an operation is one step of the editor history - Ground conversion reads only the files of the terrain directives (.txtf with origin/rotate, or .btf without text), paints the chunks with the materials of the triangles, drops only the shapes of those files - Fix: ground grids converted out-of-range floats to int, so whole-scene queries returned the triangles of a single cell (shifted chunks) - Fix: terrain layers copied from textures already uploaded without their data stayed grey - Fix: ImGui ID conflict between terrain tool radios and section headers - Fix: layers of terrain .txtf files named with the scenery/ prefix and could not be saved - Editor selftest commands for the terrain |
|||
| 35bda3778c | Heightmap terrain: .tch chunk packs, streaming with LOD, terrain painting, water and modifiers - terrain/<name>/terrain.yaml + <px>_<pz>.tch packs of 16x16 chunks (250 m, 0.5/1/2/5 m spacing), slices with crc-32 and optional zstd (vendored zstd 1.5.6 in ref/zstd) - heightmap_terrain [name] endheightmap_terrain directive replaces editorterrain - streamer: worker threads, camera + look-ahead loading, geomipmap LOD with skirts, pooled geometry - mat_terrain shader: up to 8 painted layer materials per chunk via texture arrays (opengl33); other renderers fall back to the dominant material - water bodies (outline + level), terrain modifiers (vertical profile shaping kept non-destructive) - F11 Terrain work mode rebuilt: chunks, sculpt, smooth, paint, point spacing, water tools | |||
| f94100ffe7 | feat(editor): more models selected at once (Shift+LMB), moved and turned by the gizmo together, undone in one step; Ctrl+C / Ctrl+V copy the selected models with their groups and paste them at the cursor; Ctrl+G groups the selection, Ctrl+Shift+G takes a group apart, groups written to the scenery as group ... endgroup and loaded as groups of their own; End drops each model of the selection and of their groups onto the ground; menu of the selection at the cursor on Ctrl+RMB; Edit menu with undo, redo, the clipboard, grouping, deleting; Help > Keyboard shortcuts (F1) with the keys of every field of work, F2-F5 choose the fields of work, the tracks menu lists the track tools with their keys, the keys and descriptions in the menus and tooltips; self-test commands for the selection; Polish translation | |||
| 917c8f7285 | Merge branch 'master' into feat/modern-editor | |||
|
|
b451f80c6d | feat(terrain): binary terrain (BTF2) keeps the sweeps and the //$ lines of its text file and loads them with the terrain; a sweep in the text file no longer stops the conversion; binary files of the version before made again from the text | ||
|
|
978b99b7e5 | feat(scenery): models laid along curves (sweep nodes), bent to follow the paths or repeated along them, loaded and saved with the scenery; trainsets put on a path while the simulation runs; trainset turned around by reversed after its header: the first vehicle stays at the offset and leads towards point 1, the rest stands behind it; launcher keeps reversed trainsets and can turn one around; memory cells saved with the new name of the path they name; events tell their targets and the events of a multiple event; renderer tells whether the cursor is over a surface; vehicle placed in the editor entered when the driving goes on | ||
| c4a22eabd5 | feat(editor): nodes placed with the brush and the area fill go without names; name of a model instance set in the node properties and written to its definition on save; redo of a deletion finds nodes which have no name | |||
| 90c5420396 | perf(scenery): runs of model instances read straight from the text by a reader made for them, shared between threads; anything the reader doesn't cover left to the parser; model and skin located once for a run of instances; lookup of nodes by uuid filled on load only for a scenery opened for editing | |||
| 4e4cbdd052 | feat(terrain): terrain directive can name any number of terrain files, each processed the way a single one was | |||
| 7dd5005574 | feat(scenery): SBT generated again for the sceneries which name no terrain files (.txtf, .btf); a scenery naming any gets no SBT | |||
| 2e631dcbd6 | feat(terrain): binary terrain files (.btf) made out of text terrain files (.txtf) named by terrain directives, checked against length and checksum of the text and loaded section by section when needed; -btf command line conversion; SBT files no longer generated, only loaded | |||
| 0ae0aecde8 | fix(scenery): binary terrain files named by terrain directives loaded once and only as a complete set, with fallback on the default SBT or the text files; default SBT no longer ignored and rewritten on every load | |||
|
|
a13a5548df | feat(terrain): grade line fitted to the ground under the route within the limits; editor terrain shaped to the grade line with a formation and rounded slopes, with one step back; scenery ground triangles of chosen materials converted to editor terrain and taken out of the files on save, with a dated backup of each file; crack-free simplified terrain mesh, terrain streamed as far as the scenery is drawn, the nearest chunks first; smoothing brush | ||
| 012ffc7470 | Merge branch 'feat/modern-editor' of https://github.com/MaSzyna-EU07/maszyna into feat/modern-editor | |||
|
|
79bd0c8e91 | fix(sonar): addressing reliability/security issues (#202) | ||
| 444e89558b | feat(roads): lanes change within a road piece (lanesto), junctions of two roads from earlier sceneries are loaded as such pieces and saved as roads; the editor leads the lanes of neighbouring pieces with them | |||
| 27a94509c4 | feat(roads): right of way and lane turns at junctions, road weights, kerbs, medians and forking roads, banks to the ground, roundabouts, pedestrian crossings, spawn sets by count; fix(editor): model skin export, placement on the ground under the orthophoto | |||
| 3ce9102da0 | feat(roads): level crossings, spawn and removal points for road vehicles, deleting points of a road | |||
|
|
8778353b22 | feat(editor): infrastructure bound to the paths follows their changes | ||
| daeed40f15 | feat(roads): junctions, height above the ground and rounded profile following the terrain | |||
| e4083d507f | feat(roads): editor menu and window for building roads, lanes shown as trajectories | |||
| 2f417fddcc | feat(roads): road node with generated lanes, surface and markings | |||
|
|
676bf39136 | feat(editor): track editor saves changed paths to scenery | ||
|
|
8f2a34b3cf | feat(editor): route design with curves and transitions | ||
| 521c4f9ebb | feat(editor): keep content added by the editor ahead of FirstInit | |||
| ced26d171f | feat(editor): edit parameters of a placed include | |||
| 968594c3e9 | feat(editor): include database, placing .inc templates from the node bank |