18
0
mirror of https://github.com/MaSzyna-EU07/maszyna.git synced 2026-11-19 13:26:08 +01:00
Commit Graph

303 Commits

Author SHA1 Message Date
8701c5de02 Merge branch 'master' into feat/renderers-cleanup 2026-11-10 17:09:09 +01:00
e433b43fef Script screens: led_post and resize of the Lua screens on the gpu 2026-11-10 16:22:35 +01:00
c4924f756d Lua script screens beside the WebAssembly ones 2026-11-10 15:29:25 +01:00
a73585dca0 Dont copy entire python env when already present 2026-11-10 01:05:58 +01:00
18c333b089 wasm display support 2026-11-10 00:57:37 +01:00
ff2ff308ed Some optimalisations 2026-11-09 20:58:02 +01:00
jerrrrycho
38202f4e57 Merge remote-tracking branch 'origin/master' into feat/second-loco-engine-start
# Conflicts:
#	CMakeLists.txt
2026-11-08 21:51:59 +01:00
maj00r
17676863bc Merge pull request #266 from MaSzyna-EU07/feat/exe-test-mode
Test mode: `--test` runs a scenery unattended and exits with the result (#541)
2026-11-08 20:41:57 +01:00
jerrrrycho
5f46aca43a fix: a latching line breaker lever goes off with the breaker knocked out (#277)
The EP05's single two-state line breaker lever stayed on once the converter
overload relay knocked the breaker out: every press of the toggle tried to
close the open breaker, which the tripped relay refused. A press now puts
a lever left on over an open breaker off first.

(eu07/maszyna#394)
2026-11-08 14:48:04 +01:00
jerrrrycho
486a714f52 refactor(simulation): the rules of the test mode in a file of their own, with unit tests
The command line options of the test mode and the end conditions checked after
each frame are now plain functions in simulation/simulationtestrules.cpp, which
needs nothing of the running simulation: parse_test_command_line() and
evaluate_frame(). The file is part of the core library, so the unit tests check
them (tests/unit/test_test_mode.cpp): the --test-timeout value, values of other
options not taken for options, a pass that waits for the stop, the standstill,
the timeout. test_manager only gathers what a frame brought and acts on the
verdict. No change in behaviour.
2026-11-08 11:20:52 +01:00
jerrrrycho
13ded6cdfa feat: separate engine start switches for the vehicles in multiple (eu07/maszyna#80)
In vehicles like the ST43, the SP32 or the SN61 every engine of a train in
multiple has its own start and stop buttons in the cab. Until now the cab's
line breaker / engine start switch (main_sw, main_on_bt, main_off_bt) always
started and stopped the engines of all the vehicles under its control.

- .fiz, Engine: JointEngineStart=Yes|No (default Yes, as before). With No
  the cab's main_* work the cab's own vehicle only, and an engine stopping on
  its own (stalled, out of fuel) stops only its own vehicle instead of every
  engine in the train.
- .mmd: mainb_sw, mainb_on_bt, mainb_off_bt work the second vehicle with an
  engine under the cab's control, mainc_sw, mainc_on_bt, mainc_off_bt the
  third one. They count along the control cable from the cab's vehicle,
  behind the cab first. Like main_*, the start switch has to be held for the
  vehicle's IniCDelay with the vehicle ready (MainSwitchCheck); an impulse
  switch of an electric locomotive with series motors closes on release.
- New commands, added at the end of the command list: linebreakertoggleb,
  linebreakeropenb, linebreakercloseb, linebreakertogglec, linebreakeropenc,
  linebreakerclosec. No default keys.
- The logic is in vehicle/enginestart.{h,cpp} (core library), tested in
  tests/unit/test_engine_start.cpp.

Nothing changes for existing vehicles: the new key and the new cab controls
are optional, and without them the code does what it did before.

Game data (SVN, not changed here, to be done separately; the code works
without it): for the SN61 (dynamic/pkp/sn61_v2), whose cab models already
have the buttons start02/stop02/start03/stop03,
- sn61.fiz, sn61-86.fiz, sn61_v1.fiz and the other SN61 .fiz: add
  JointEngineStart=No to the Engine: line;
- sn61.mmd.inc (and the other SN61 includes): after main_on_bt add
  mainb_off_bt: { stop02 mov -0.005 0 0.1 ... }
  mainb_on_bt: { start02 mov -0.005 0 0.1 ... }
  mainc_off_bt: { stop03 mov -0.005 0 0.1 ... }
  mainc_on_bt: { start03 mov -0.005 0 0.1 ... }
  with the sounds of main_off_bt / main_on_bt.
The tooltips "line breaker B" / "line breaker C" are new strings for lang/*.po.
2026-11-08 07:12:30 +01:00
d4120ea5db Merge branch 'master' into feat/renderers-cleanup 2026-11-07 16:44:51 +01:00
jerrrrycho
02e29f6971 feat(simulation): test mode, --test runs a scenery unattended and exits with the result (eu07/maszyna#541)
eu07 --test -s <scenery> [--test-timeout <s>] runs the scenery in ghostview with
the null renderer (models loaded, no textures), a hidden window, no sound,
network or python, and in fixed steps of 0.03 s of simulation time per frame
(three 10 ms physics steps) as fast as it can. Without -seed it uses a fixed
seed, so two runs give byte-identical physicslogs.

The scenery reports its result to the __test.result memory cell, which the
simulator always creates: value 1 passes once every vehicle has stood still for
1 s, value 0 fails at once. The run ends with exit code
  0 pass, 1 fail,
  2 a train passed a signal at stop (SetVelocity 0 0, as seen in its driver's
    speed table; SetVelocity 0 x on automatic block doesn't count),
  3 timeout (test.timeout, default 3600 s of simulation time),
  4 standstill (every vehicle still for test.standstill s, default 300, with no
    result; a pass with test.pass_on_standstill yes),
  5 error (no -s, the scenery didn't load or has no vehicles, an exception).
The test.* keys go in the scenery's config block; test.fail_if_stop_overran no
only logs a signal passed at danger. Outside the test mode a signal passed at
danger is logged.

The null renderer gets a ui backend which draws nothing, hands out the null
texture and material instead of throwing, and ends the ui frame. A GL context
is still made for the hidden window, without asking for a version, as parts
of the ui create textures with gl calls of their own. No crash dialog or
message box in test mode; the window code no longer needs a monitor.
2026-11-07 16:20:42 +01:00
917c472cc9 Merge pull request #257 from MaSzyna-EU07/fix/vehicle-removal-smoke
fix(gfx): a vehicle taken off the tracks stops smoking (#90)
2026-11-07 13:28:31 +00:00
3f6a10f1fe Merge pull request #237 from MaSzyna-EU07/feat/track-uneven
Feat/track uneven
2026-11-07 11:18:49 +00:00
jerrrrycho
4489dd7469 test(gfx): unit tests of the smoke of a vehicle taken off the tracks (#90)
The spawn count of the smoke source of a vehicle moves out of
smoke_source::update() into smoke::vehicle_spawn_count() (vehicle/smoke.h),
a free function on the mover state, which joins the core library so the
unit tests can call it the way the source does. The rates are the same as
before, the steady rate of the source still counted in before the share of
the engine.

Tests: tests/unit/test_smoke.cpp. A vehicle taken off the tracks spawns no
smoke and drops the pending particles, with the engine starting, idling or
under load; a road vehicle back from the pool puffs again; the engine adds
to the steady rate; the pending count stays within the room of the source.
Two of the four fail without the fix.

Checked again on td.scn with the SM42 driven into a portal: the smoke
source keeps puffing on the run and drops to 0 particles once the vehicle
is taken off the tracks.
2026-11-07 11:38:49 +01:00
b151898071 Add small crash reports with crash details, CPU preflight check and eu07_starter 2026-11-01 16:41:03 +01:00
jerrrrycho
d995674bee fix(physics): automatic couplers don't catch above the safe collision… (#217)
* fix: automatic coupler crashes, horns, compressor start delay, radio and cab lever sounds

fix(cab): the line contactors lamp goes out with the pressure switch (eu07/maszyna#470)

The lamp of the open line contactors, which tells the start can be made, went out at 1 bar in the brake
cylinders, while the pressure switch cuts the start off only at 2 bar (or below 3.6 bar in the main pipe), so
with the brakes partly applied the start could be made with the lamp out. With a pressure switch fitted the lamp
now follows it; without one it goes out at 1 bar as before. The same holds for the lamp of the second unit, which
used to keep its last state between 1 bar and the cut-off. The condition is
TMoverParameters::LineContactorsLampLit().

Tests: tests/unit/test_line_contactors.cpp.

refactor: Sonar findings of PR 217

- horn_supply::pneumatic shadowed the pneumatic enumerator of the sound flags (cpp:S1117), it's horn_supply::air;
  the supplies read with using enum (S6177),
- CouplerForce(): the automatic coupling refused or caught without another level of nested ifs (S134), the
  same outcome: too fast, the coupling is locked; caught, coupled and locked; otherwise left to try again,
- CompressorCheck(): the power the compressor doesn't draw yet noted without a TODO (S1135),
- tests: the previous crash damage setting in an in-class initializer (S3230), the loops which stop early with
  break rather than in their conditions (S886), the stand-ins of test::pair in a std::vector rather than an array
  (S5945), units in the comments of the example without /* */ (S1103).

test: the cases the changes of the branch left without a test

- Cntrl.: BDelay1 to BDelay4 reach the brake delays (now through std::format), the default start types of the
  ground and converter overload relays of a multiple unit and of other vehicles (out of the nested conditionals),
- the compressor: fed from the low voltage it waits from the low voltage coming on; the pressure switch stops it
  above the cut-out pressure, without one the excess air is vented (the vented fraction rewritten),
- the horns: a vehicle without any air sounds as before, the threshold pressure, an electric horn on 110 V,
- the positions of a cab control below zero, and a control without position sounds.

refactor(cab): the kind of the train heating switch as a flag

Read once with the vehicle definition, rather than compared as text in each of the switch commands.

feat(cab): train heating switch springing back (MaSzyna-EU07/maszyna#85)

TrainHeating=[toggle]|impulse in the Switches: section of the vehicle definition makes the train heating switch
an unstable one: it goes up to switch the heating on, down to switch it off, and back to the middle once let go,
instead of staying where it was put. The position of such a switch isn't set from the heating state when the cab
is entered.

Tests: tests/unit/test_switches.cpp.

feat(sound): mirror sounds (MaSzyna-EU07/maszyna#84, eu07/maszyna#322)

The sound definitions of a vehicle (.mmd) take mirroropen: and mirrorclose:, played as a mirror sets off
unfolding or folding, and the locations section mirrors: <offset>... end, the offsets along the vehicle of the
mirror pairs, as for the doors (negative ahead of the centre), each pair at the sides of the vehicle. As the
animation, only the mirrors at the occupied cab sound. The start of a move is mirror_moves::motion in
vehicle/mirrors.h.

Tests: tests/unit/test_mirrors.cpp.

feat(cab): joint oil and fuel pump switch (MaSzyna-EU07/maszyna#81)

A cab control oilfuelpump_sw: switches both the oil and the fuel pump at once, with the new command
oilfuelpumptoggle (no key by default). As a two-state switch it turns both pumps off when both are on and both on
otherwise; as an impulse switch it's held to start them, like the separate pump switches. Its position follows
the pumps when the cab is entered.

refactor(editor): text fields filled without strncpy (MaSzyna-EU07/maszyna#112)

The last three strncpy calls Sonar flags (cpp:S5816), in the road and track editors, copy the text into the
ImGui field buffers with std::string::copy and terminate it right after; the text gets cut to the buffer as
before.

fix: automatic coupler crashes, horns, compressor start delay, radio and cab lever sounds

- automatic couplers don't catch above the safe collision speed (#86): with crash damage on they couple at a
  closing speed of 15 km/h at most, a faster hit locks the coupling until the vehicles part and the collision
  runs its course. On the way: CollisionVelocity() read a head-on 10 + 10 km/h as 14.1 km/h (quaternions turn
  by half the angle), it's now taken from the touching ends; CollisionDetect() took the other vehicle's speed
  the wrong way round for vehicles facing each other. Head-on hits now derail sooner, at the intended limit,
- a single horn lever can't sound both tones at once (eu07/maszyna#392),
- a skid ends once the vehicle stops on locked wheels (eu07/maszyna#479),
- electronic destination signs are blanked at the end of the timetable (eu07/maszyna#446),
- horns need the air or the voltage to sound (eu07/maszyna#290, #76): HornType=[Pneumatic]|Electric and
  Horn3Type in Cntrl.; a pneumatic horn needs 0.2 MPa in the main reservoir (or the main pipe without one),
  an electric one the low voltage; the lever stays where it was put,
- compressor start delay (#67): CompressorStartDelay [s] in Brake., counted from the compressor getting its
  power, after the engine starts say; none by default,
- the channel and volume buttons of a radio without power do nothing (eu07/maszyna#429); the power check of
  the radio is TMoverParameters::RadioPowered(),
- a lever moved smoothly sounds the positions it passes (#83).

Sonar findings in the functions changed: nesting, nested conditionals, commented-out code, std::format,
references to const. Unit tests: test::pair for two vehicles running into each other, test_couplers,
test_horn, test_wheelslip, test_compressor, test_radio, test_gauge_positions.

* fix: review findings of PR 217

- the pressures of the mover are in bar (MinCP=7.0 in the vehicle definitions), so the 0.2 the pneumatic horns
  needed was 0.2 bar; it's 2 bar now, and the tests take their pressures in bar too,
- the lamps of the ground relay and of the motor overload relays follow the pressure switch as the line
  contactors one does, TMoverParameters::MainCircuitLampsEnabled(), so the lamps of one cab go out together,
- the joint oil and fuel pump switch leaves out a pump started automatically, which ignores the switching:
  with one, it couldn't turn the other off, and showed off with both running (OilFuelPumpsEnabled()),
- the kind of the train heating switch comes from the occupied vehicle on entering the cab too, as in the
  switch commands; in a multiple unit these are different vehicles,
- CouplerForce() put the force taken back by the other vehicle on its far coupler when the vehicles faced each
  other (Couplers[1 - End] rather than the coupler it's coupled with),
- the velocity difference along the coupler axis computed once, CouplerVelocityDifference(), for CouplerForce()
  and CollisionVelocity(),
- the attachcoupler flag added without the SetFlag() call with 0, the index of the mirror moves noted as by side.

Tests: the coupler force of vehicles facing each other, the joint switch with an automatic pump, the lamps of
the main circuit, the horn and compressor pressures in bar.

* fix: coupler force of vehicles facing each other taken back along the other vehicle's axis

CForce runs along the axis of its own vehicle, so the force the other vehicle takes back on its coupler of the pair
is turned around once more when the vehicles face each other (-CF * DirPatch()), as that vehicle computes it itself.

Tests: the coupler forces of the pair facing each other and facing the same way.
2026-11-01 09:12:36 +01:00
1ad6d8b2bd Merge remote-tracking branch 'origin/feat/track-uneven' into feat/renderers-cleanup 2026-10-31 19:52:29 +01:00
maj00r
2b8d7d7cf3 refactor(track): what goes with unevenness in one place, readable
The rules stay in TrackUneven.h with no dependence on the engine, as they can
be tested. Their use on the tracks moves out of Track.cpp to TrackUneven.cpp,
split into steps: the group of switches, the values of its paths, the meeting
of two ends. One set of helpers for the paths of a track takes the place of
the same conditions written out in several places, and the value at the ends
of a switch is worked out in one place. The clatter of an axle leaves the long
Update of a vehicle. The fields in the editor say themselves when they show.

No change in behaviour.
2026-10-31 19:05:56 +01:00
0bc29af650 Merge remote-tracking branch 'origin/feat/switch-fastenings' into feat/renderers-cleanup 2026-10-31 17:13:45 +01:00
765153ad91 Merge remote-tracking branch 'origin/feat/switch-blades' into feat/renderers-cleanup 2026-10-29 23:55:04 +01:00
1447dcf075 Walk the shadow passes and the culled model groups on worker threads in the Vulkan renderer 2026-10-27 20:56:11 +01:00
2a876befb0 Shade the sky and the sun by the scenery around the camera instead of the track environment flags 2026-10-27 16:02:36 +01:00
9dde5b0e5e Take the ambient occlusion into the lighting and add a probe of the cab 2026-10-27 13:23:52 +01:00
550d47e97c Merge remote-tracking branch 'jano211/siec-radio' into feat/renderers-cleanup 2026-10-26 16:36:36 +01:00
719c729929 Improve rain shader 2026-10-26 15:51:56 +01:00
a6bdeeaa2b Add DLSS Frame Generation (gfx.framegeneration x2/x3/x4) and Reflex (gfx.reflex) to the Vulkan renderer 2026-10-25 20:52:12 +01:00
1841e6d7b0 Add NVIDIA DLSS to the Vulkan renderer (gfx.antialiasing dlss/dlaa) and gfx.buffer.percent 2026-10-25 19:35:33 +01:00
f20b1a3071 Replace cubemap scenery reflections with SSR, add Vulkan ray traced reflections 2026-10-25 13:54:49 +01:00
252b9373ea Add gfx.antialiasing (off, msaax2/x4/x8, taa) with temporal anti-aliasing in the GL 4.6 and Vulkan renderers 2026-10-25 05:17:41 +01:00
c48c58776a Vulkan: parity with GL (P1–P7), shared GPU culling records (N6c), threaded command recording and render thread (M1, M4) 2026-10-25 03:06:01 +01:00
maj00r
ece61056ff feat(editor): a switch laid into a curve is checked by ST-T1-A6 as it's placed: the radii of its main and diverging tracks at its start and its end shown at it; warnings where the curvature of a track turns from one side to the other within it (KZW II, 9.7 pkt 12), where the diverging track is sharper or the main track bent more than table 11.9 allows the basic switch (the values allowed by way of exception named), where a switch of 1:9.403 or steeper is bent (11.4 pkt 4), where the cant changes within it (11.4 pkt 7), where a cant ramp starts or ends within it or under 6 m off it (9.6 pkt 16-17) and where the cant is over 100 mm (table 9.6); a note on a transition curve, which only an exception allows. The ends of the cant ramps are marked on the curve, and the start of the switch pressed within 3 m of where it starts or ends at an end of a ramp, or keeps the 6 m off it, is drawn there. The warnings stay in the status once it's laid. The checks stand on their own in editor/editorSwitchCurve, with unit tests 2026-10-25 00:29:05 +02:00
49f9df7d98 Enable vulkan compilation by default 2026-10-24 20:26:28 +02:00
9b7d02e5fb Vulkan: scene rendering (D1–D7) on a scene walk shared with GL (N6a, N6b) 2026-10-24 20:10:24 +02:00
a83d5c6978 feat(editor): presets of the track properties, applied on the selected tracks
(cherry picked from commit 83c8c23c80)
2026-10-24 16:33:24 +02:00
bd589f272d feat(vulkan): vulkan 1.4 core with the user interface and the launcher, shaders split into ogl46/vk14 with SPIR-V binaries loaded first 2026-10-24 05:47:11 +02:00
68fa5dc2da feat(vulkan): gfxrenderer picks the opengl 4.6 or the vulkan 1.4 renderer (B1-B3) 2026-10-24 03:06:33 +02:00
maj00r
85b76acca5 perf(sleepers): the instances of the sleepers and timbers of a track sent to the gpu once, as it's laid, and kept there in a buffer of their own; in each pass the runs of them in sight turned by the modelviews of their cells into the instance buffer of the frame by a compute pass, one dispatch and one barrier a pass, and drawn in one instanced draw for each model, part and level of detail, in place of the cpu turning every instance every frame 2026-10-24 01:40:34 +02:00
Claude
f30fefd91c Sieć trakcyjna: przęsła wg typów sieci, wysięgniki z katalogu, bramki, kotwienia i edytor sieci
Sam kod exe z gałęzi siec-trakcyjna (bez testów, notatek i danych z tests/catenary).
Dane (data/traction_*.txt) leżą poza repozytorium.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019Tqn7T8D1Gx3ptKtZgNtX5
2026-10-23 23:15:00 +02:00
2dc70a50bc perf(debug): memory of the process and of its parts in the debug panel: resident, peak and private memory, card memory (GL_NVX_gpu_memory_info), the copies kept by the textures, geometry banks, models, scenery shapes and lines, sleepers and sound buffers 2026-10-23 22:02:03 +02:00
60667588b5 perf(physics): the steps of the vehicle physics on many threads, in groups of vehicles which act on one another (performance.cpucores, 0: all cores) 2026-10-23 19:56:36 +02:00
maj00r
5aedbcdc1b feat(sleepers): the timbers of a switch get the fastenings of the rails from the submodels plate, chair and check of their model: a plate under each rail where it lies on a timber, slide chairs under the stock rails along the blades, a fastening of both where a check rail or another rail of the frog lies close beside, the legs of the nose in one plate where they're joined; the rails sit on the plate, the blades ride on the slide plates of the chairs as high as the model has them, their webs shortened; the fastenings drawn within 120 m; selftest fastenings 2026-10-23 16:46:58 +02:00
maj00r
5ecb6ebe00 feat(editor): the kilometrage tool sets the km of the railway lines, points where the km is known and jumps of the km, the rest along the axis of the line, between the tracks of a double-track one and along the longer track where they run apart, kept in the scenery as //$k lines
The track mode Kilometrage (X, under More) puts a point of the km where a track is clicked: the line, the km and, at a jump,
the km on from it. The axis of a line follows the main paths of the switches through the tracks of its points; on a
double-track line it runs between the tracks, and where they part on formations of their own and come together again it
runs along the longer one, the shorter one going by its own length with its last hectometre before they meet taking up
the difference (PKP GK-1 6.1.12). The km between the points are stretched to the length of the scenery evenly; the panel
lists the points with the stretch, the 3D view shows the axis, a tick at each hectometre, the points with their km and
the km of the lines by the mouse. Read the km from the posts turns the hectometre posts along the line into the points
of its km, a jump where two runs of numbers meet, and warns of a jump on a curve or at a station (Id-1 § 19). Each change
is a step of undo.
2026-10-22 13:27:37 +02:00
maj00r
8c5795348f feat(editor): the signalling mode finds the station of a switch, lays it out as a schematic along its main track and keeps its name, code and line in the scenery 2026-10-22 07:35:31 +02:00
c5a894a674 feat(track): rails and ballast blended into those of the tracks joined, where their textures differ 2026-10-21 22:34:57 +02:00
12c2aaf1db chore: remove the NVRHI-based betterRenderer 2026-10-21 19:30:32 +02:00
83c8c23c80 feat(editor): presets of the track properties, applied on the selected tracks 2026-10-21 16:09:05 +02:00
maj00r
0f9b00c74a feat(editor): a map of Poland to pick a place on, shared by the scenery wizard and the terrain model 2026-10-21 13:20:25 +02:00
ae3e063df0 Add a list of the terrain chunks to the editor 2026-10-21 13:15:44 +02:00