mirror of
https://github.com/MaSzyna-EU07/maszyna.git
synced 2026-11-20 22:04:59 +01:00
793ff968dee04674f7ee9ee0b0e407058632bb91
195 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
| 053e4cacee | Merge branch 'master' into feat/renderers-cleanup | |||
|
|
16cad1fc07 |
Merge pull request #332 from MaSzyna-EU07/fix/editor-po-wizard-newlines
Editor: the Polish of the download area tooltip and hint shows again |
||
|
|
39e8bcc59d |
fix(editor): the orthophoto shown one of three ways, the terrain made from the NMT under one rule and around the camera (#334)
* fix(editor): the orthophoto shown one of three ways, chosen in one place, and laid on the terrain without flicker
The settings of the orthophoto had two checkboxes ("Fit to terrain", "Covered by
objects and terrain") and three heights greyed out by turns, and the user couldn't
tell what they did. They're one choice now, each way told under it:
- over the view: drawn over everything, see-through, to compare with the map
- on the terrain, in the scene: tracks and models cover it, lit, the mouse
places objects on it
- a flat sheet in the scene: for a scenery with no terrain yet
The lift is shown only where it matters (on the terrain, in the scene), the
height is named for what it is in each way ("where there's no ground"), and the
ways in the scene are greyed out with the Better Renderer, which doesn't show
them.
On the terrain in the scene the photos are a copy of the ground's triangles 5 cm
up, which the depth buffer lost further away: they flickered with the terrain
textures. Their shapes are decals now, drawn with a polygon offset towards the
camera (the depth is reversed, so a positive one) in every pass but the shadows.
The translations hold the strings of the terrain of the download area as well.
* fix(editor): the terrain made from the NMT under one rule, also around the camera within the download area
The download area didn't bring the terrain: the NMT squares in it were fetched
only once the model had been placed (its panel opened) and the scenery had
terrain open, and nothing told why. They're fetched from the area as it is now,
in PUWG 1992 already.
Where a chunk is made from the model where there's no terrain, the rule is one
for the track laid, the area and the buttons of the panel (nmt_chunk_offset):
beside terrain made from the model it goes on at its height over the model,
otherwise (terrain made by hand, or none) at the offset of the scenery; no chunk
is left out for what lies beside it. Before, the terrain under the track laid
needed terrain in the scenery and a chunk of it beside, gave up chunks for the
session otherwise, and the model was placed only by its panel.
The terrain of the area: "The terrain of the scenery around the camera" (on by
default, kept with the editor) makes the chunks missing in the area in a square
of 9 x 9 around the camera, the nearest first, as the camera goes. Light: a chunk
at most every 0.1 s and three times as long as it took left to the editor, after
the work with the model the user asked for; the step of the terrain history the
editor keeps open is closed around each chunk, as for the terrain grown while
laying. Not the whole area at once: the chunks made wait in memory to be saved.
The log tells what holds it.
The download of the area gives way to the squares asked for: a square of the
area being downloaded is broken off as one is asked for (the terrain under the
track laid) and taken up again later.
The map no longer covers the area with green over the tiles in the cache, only
the failed ones are red.
* fix(editor): the terrain under the tracks follows them again, a brush stroke keeps its undo, the area terrain timed
From the review of the terrain made from the NMT under one rule:
- The terrain drawn to the tracks place by place (under the tracks) took the
height of the chunk beside it, carrying one offset along a run of chunks,
metres off the tracks: nmt_chunk_offset gives the offsets of the tracks there
again. The height the track laid goes on at (state.ahead) comes from the
terrain grown under it only, not from the chunks of the buttons.
- A chunk of the area made during a stroke of the terrain brush closed the
stroke's step of the history, and its undo lost the part brushed before: the
area terrain waits for the stroke to end.
- In a scenery with no name yet the terrain under the track laid was asked for
and dropped every half a second, the log filled: nothing is asked for there.
The log tells how long the chunks of the square around the camera took, and the
self-test sets the area terrain on or off for its run (nmtsettings area 0|1).
Measured on lukow.scn: 1.3-1.5 ms a chunk, 2.2 ms the longest; the longest frame
17 ms against 10 ms without it, none over 33 ms.
* fix(editor): the selftest turns the area terrain on or off for its run only, the setting kept
---------
Co-authored-by: maj00r <maj00r@host>
|
||
|
|
be7f9e4712 |
feat(editor): the cursor drawn into the picture, for streams and recordings of the window
View > Cursor drawn into the picture (streams): the system pointer is hidden and ImGui draws its own into the frame, so it shows in a capture of the window (Discord, OBS, the capture of the system), which leaves the system pointer out. Off by default. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DDcMn1Q7wdYkbxDUWscNHZ |
||
|
|
cb777e760d | fix(lang): the two Polish lines of the download area written with \n, so they match the tooltip and the hint | ||
|
|
e6fa206e47 |
Split stack 3-5c into master (switch blades, 3D sleepers, editor core, SRK stations, tutorial) (#289)
* feat(track): the rail code split by concern, the blades of the switches with the key frogs shaped from their templates The rails are laid by code of their own instead of inside Track.cpp: gauge lines (GaugeLine), knot lines (Knots.h), crossings and check rails (RailCrossings), rail materials (RailMaterials), measuring the rail profile (RailProfile), planning the cuts (RailPlan), the carving scan (RailCarve) and laying the geometry (RailLayer). A switch with the key frogs draws its blades from the tip where their planed nose ends to the heel, bent as they're thrown, and the rail behind them from the heel on, where they were laid from the start of the switch before; on a switch of the catalogue they start at the cut tip of the tables, 1.248 m from the joint at R 190, 1.5 m at R 300 (track_features::blades). The frogs cut from the rails, the wing and the check rails are built but switched off (track_features::crossings), the rails laid whole as before. The switches without the key keep the blades they had. A switch path can be a chain of pieces: pieces1 and pieces2 keep the parts of each path after the classic bezier, which stays as the approximation older versions read. A path with its radius given is a curve however gently it bends, a plain track a straight only where both of its control vectors lie along it. A vehicle trailing through a switch with a movable nose set the other way runs off the rails at it (TRAILED_SWITCH). * feat(render): the shared treads of the rails and their cut faces drawn, the cut faces in the matte variants of the rail materials Both renderers draw the treads a track shares with the rails it crosses, in the pick pass too, and a pass of their own for the faces where the rails are cut, the ends of the blades among them, in the matte variants of the rail materials, so the cut faces don't shine like the head the wheels polish. * feat(vehicle): an axle on a switch keeps to the path it came on, and coming from the frog end trails the switch through where the wheels reach the blades The switch thrown under an axle no longer moves it over onto the other path; it runs on along the one it entered. Coming from the frog end, where the blades are shaped or the frog has a movable nose, the switch set the other way is trailed through (rozprucie) only where the wheels get to the blades or to the nose, not as the axle enters the track; the other switches are trailed through as it enters, as before. * fix(track): the tracks drawn straight before, which their second control vector bends now, written to the log The simulator told a straight by the first control vector of a path alone, so a track whose second control vector bent it was drawn straight; now it's a curve. Such a track is named in the log as it loads, so a scenery made counting on the straight can be found: 25 tracks of lk357. Paths with both control vectors along them bend a centimetre or so at most and aren't named. * feat(track): 3D sleepers and switch timbers laid where the simulator makes the ballast, switched off in the build The sleepers of a track running alone are laid square to it, the timbers of the switches and crossings across the tracks running over them, shared by them, of the models set with sleepers3d and sleepers3dplain in eu07.ini; sleepers3dbed tells whether the ballast is laid under them too, lowered so they stick out of it. The layout of a cluster of tracks is worked out once and kept till a track of it changes, in a thread of its own while the simulation runs. timbermodel of a track, read and written back before, takes the place of the model of sleepers3d there. All of it is off whatever eu07.ini sets (track_features::sleepers), the tracks keeping their ballast and their sleeper models. * feat(render): the 3D sleepers and switch timbers drawn in instanced batches Render_Timbers lays the beams of the tracks in range where they're out of date and draws those of a run of tracks of a cell gathered by the model and its part or its level of detail, in as few instanced batches as they fit in; in the shadow pass only those near the camera. A track with them leaves its old sleeper model out. OpenGL 3.3 renderer only. * fix(track): the counts of what's wrong with the sleepers kept safe from the thread laying them, and that thread stopped before what it works with goes The counts of the beams clipped, dropped and off the plane, of the slowest and the biggest cluster, are counted by the thread working out the layouts in the background as well as by the simulation laying a cluster itself, and were plain values written by both; they're atomic now. What the thread keeps the clusters in, their version and the counts were made after the worker, as it first asked for them, and so destroyed before it at the exit while its thread could still be laying a cluster; they're made first now, the worker stopping and joining its thread before they go. The tracks go with the paths of the simulation, made before the worker. * revert(track): a tributary and a track of an unknown type load as before They came in with the rail code from the guards of the editor against crashing, and don't belong with the blades: a track of an unknown type loaded as a normal track of the railway could be joined to it and run on, and a tributary loaded as a river with its first path lost the second one when the editor saved the scenery. Both load as on master again; the place where the editor crashed on them is to be guarded where it is. * fix(track): the tracks drawn straight before named in the log once, as they load, and the paths of the switches with no radius told a straight as before in one term The log of the tracks the second control vector bends now was written each time the segments of a track were made again, as a track with its unevenness loads and as the editor changes or drags a track; it's written only the first time, as the track loads. The paths of a switch or a crossing with no radius keep the rule of master, a straight told by the first control vector alone, its two terms being the same length; they're one term now, with the comment saying so. * fix(track): the thread laying the sleepers stopped as the application exits, and loading no models itself The thread reads the scenery, which the application deletes as it exits well before the statics go: it's stopped and joined first thing in exit() now, the worker destroyed with the statics only where the application exits some other way, and not started again after. The models the beams are made of were loaded by the thread where it didn't find them, through the renderer, out of the thread of the renderer, into a map read by the simulation meanwhile: they're found under a lock now and loaded only by the threads other than it, again for all the tracks whenever a track changed since, before a layout is asked of it. With the 3D sleepers off in the build their settings aren't exported, and a track changed doesn't look for the tracks around to lay their beams again. * feat(track): the 3D sleepers turned on with sleepers3d in eu07.ini, no longer switched off in the build track_features::sleepers is gone: sleepers3d <model> in eu07.ini lays them, none (the default) lays nothing and the tracks keep their ballast, as before. The sleepers3d settings are written back with the others. The editor changes the tracks, so while it's open their sleepers are worked out on the main thread as they're needed, not in the background. * fix(render): only the part of a timber model drawn, not what else the model holds A timber model of parts may hold more than its begin, main and end, as the kits with the fastenings of the rails do. Those were drawn with each part of each timber, in the middle of the track; they aren't laid, so they're skipped now. * fix(track): the 3D sleepers laid only for a renderer which draws them Only the OpenGL 3.3 renderer draws the beams. With another one a track set to them lost its ballast to them, lowered or not laid at all with sleepers3dbed no, and nothing was drawn in its place. Draws_Timbers() of the renderer tells now, and where it's false the tracks keep their ballast, as with sleepers3d none. * fix(render): the submodels of a timber model left as they were after its parts are drawn They were all made visible after a part was drawn, the ones the model hides itself too, like Light_On, while the same model may stand in the scenery. The submodels of the top level besides the parts are listed as the model is loaded, hidden while a part is drawn and given back their own visibility after. The parts have to be at the top level of the model for that; a model with them deeper is logged and drawn whole. Render_Timbers no longer looks the model up under the lock for every run of tracks, the name set is enough there. * fix(render): a vertex whose faces give its texture no direction gets a tangent across its normal, not a NaN one The cut ends of the rails have one spot of the texture on all their corners, so their tangent came out of normalize() as NaN. The normal-mapped shaders then shaded them with a NaN normal: about half of the vertices of the cuts and frogs, and the end faces of the rails. * feat(track): the frogs cut from the rails turned on with frogs in eu07.ini, no longer switched off in the build frogs yes cuts the rails of the plain tracks and of the switches with the key frogs where they cross other rails, into frogs, wing rails and check rails. It's off by default: the rails are laid whole as before, the blades of the switches with the key are shaped still. * refactor(editor): the track mode file split into the files of its tools, the code as it was A pure move, so that the commits after it show what changes in each tool rather than a 4800-line file rewritten. The member functions of editor_mode go to the file the editor of this branch has them in: route, straights, lay, switchplace, switchdrive, switchtool, trackgizmo, and the rest stays in editormodetrack.cpp. The helpers of its anonymous namespace go to editormodetrackshared.h, as they were but inline, in namespace track_mode, which the files use. No line of code changes; the files add only their license, includes and the using line. * feat(editor): the groundwork the tools of the editor share - The tool interface (editortool.h), the gestures of the mouse (editorgestures.h) and what the modes share (editormodeshared.h); the projection, viewport, selection and texture picking taking them up. - Scripted input (scriptedinput): the input of a selftest script fed to the editor as if typed and clicked, the real mouse and keyboard ignored meanwhile; EU07_EDITOR_SELFTEST_HIDDEN draws into a window never shown nor focused. - The ui layers and panels of the editor, its settings, icons and the info of the includes; the layers of the scenery and their saving; the launcher mode. - utilities: user_cache_path (the cache folder of the system for the user) and the helpers of the translations. - stb_image: the gif loader takes the frame two back from the frames it decoded, not from before its buffer. - tools/editor: the scripts making the headers of the drives, the turntables, the editor and its usage. - Unit tests: test_area and the stubs of the editor the tests link. Not built on its own: the tree builds again with the selftests commit, the one before the translation. * feat(editor): the tracks laid along an alignment, to the PKP PLK norms, with their grade line and the ground - The alignment of the laying (editorAlignment, editorAlignmentStore): straights, transition curves and arcs with the cant of the norms for the speed, the radius below the minimum for it a warning; the lay, route and straights tools build on it, the route plan reading the curves going on from the tracks adjoining. - The grade line (editorProfile, the profile and gradeline tools): fitted to the terrain model or edited by hand, the tracks fitted marked in the scenery (//$f), the shared grade lines of nearly parallel tracks (//$n). - The ground under the tracks (editorGroundFollow, trackbed): the terrain drawn to the tracks and restored, the tracks put onto the terrain. - Connections between tracks (editorConnections, the connection and connection curve tools), the track presets, the shape of a track (editorTrackShape), digitizing tracks from the orthophoto, the properties sheet of the tracks (trackprops) and the track ux. - Unit tests: alignment, ground fit, heights, with the data of two fits. Not built on its own: the tree builds again with the selftests commit, the one before the translation. * feat(editor): the switches placed, slid and designed from their templates - The switch templates (editorSwitchStore, the template tool): the catalogue switches and the user's own, kept with the settings; the designer (editorSwitchDesign) with a drawing of the dimensions, a and b typed in with the shape making up the rest, a switch clicked off the orthophoto. - The curve of a switch laid into a curve (editorSwitchCurve), placement on a straight or into a curve, slide along it, crossovers and double slips (switchplace, switchslide), the drives of the switches (switchdrive) and the records of the switches placed (records). - Unit tests: test_switch_curve. Not built on its own: the tree builds again with the selftests commit, the one before the translation. * feat(editor): the tools of the infrastructure beside the tracks The gauge, speed, joints, lineside, parallel tracks, vehicles, signals, turntables, sweep and road tools with headers of their own; the kilometrage of the lines (editorKilometrage, the km tool); the infrastructure, roads and speeds behind them (editorInfra, editorRoad, editorSpeed). Not built on its own: the tree builds again with the selftests commit, the one before the translation. * feat(editor): the terrain model of geoportal.gov.pl and the orthophoto downloaded for the editor - editorNmt: the squares of the terrain model at 1 m (NMT GRID1, the WCS service of geoportal.gov.pl) fetched by two workers, kept in editor/cache/nmt/grid1 of the game folder, the heights of the scenery taken from them; the nmt mode loads it along the tracks or around the camera. - editorHttp: the HTTP client of both, WinHTTP on Windows, libcurl elsewhere where it's built with it; without it the caches only. - The orthophoto: its cache moved to the cache folder of the system for the user, the download area a polygon on the topo map (//$a) filled in the background, the 4K imagery, the tiles waiting outlined on the ground. - editorGeoMap: the topo map of the top view; heightmapterrain and the terrain streamer grow the terrain made from the model around the camera. Not built on its own: the tree builds again with the selftests commit, the one before the translation. * feat(launcher): the scenery wizard picks the place of a new scenery on the topo map the editor shares The wizard drops its own map download and decoding for the topo map widget of the editor (editorGeoMap). The place clicked becomes the geographic reference of the new scenery (//$g PUWG1992), and the scenery starts with the orthophoto of the editor on (//$o), lying under it in place. Not built on its own: the tree builds again with the selftests commit, the one before the translation. * feat(editor): the tools wired into the editor mode and the build editor_mode takes the tools of the commits before: its header declares them, editormode.cpp and the track mode drive them, and the renderers draw their overlays (opengl33 and legacy). CMakeLists lists the new sources and adds WITH_EDITOR_SELFTESTS (off by default); the unit tests build the new test files. Not built on its own: the tree builds again with the selftests commit, the one before the translation. * feat(editor): the selftests of the editor split by what they test The scripts of EU07_EDITOR_SELFTEST run the commands of editormodeselftest*.cpp: scene, track, rails, join, switch, signal, sleepers, sweep, terrain, monkey. The code is in every build; only with WITH_EDITOR_SELFTESTS=ON does the editor read the variables and run a script. The selftests of master now need the option too. The tree builds again with this commit. * feat(editor): the Polish texts of the editor, all of them in one update of editor_pl.po * fix(editor): the marks of the editor moved off the letters the starters read, and its lines told by their words The starters read some letters in a scenery file: the Starter the title //$n, the attachments //$f and the old scenery //$a, StarterNG and the launcher of the game the attachments //$f and the title //$n. The editor wrote its download area, shared grade lines and fitted tracks under them, and took every line of those marks as its own: saved, a scenery lost its title and attachments, and the starters showed the lines of the editor as them. - The download area is //$z, the shared grade lines //$w, the fitted tracks //$t. - Their lines and those of //$o are told by their first words, as //$h, //$r and //$k were: //$o only as "on 0" or "on 1", the origin or the settings of older builds after it, so a trainset described as "on ..." isn't taken. - The lines older builds wrote under //$a, //$n and //$f are read only by the words the editor wrote in them, or by its own comment line before them, under the new mark. Each save writes them again with it, also when the editor didn't change them; the lines of the starters stay. * fix(editor): a square of the terrain model cut short isn't read, and the squares are kept in the user's cache The service puts the directory of its GeoTIFF before the pixels, so a file cut short by a write or a fetch broken off was read whole, the pixels missing coming out as heights of 0 m, for good. - The reader (editorGeoTiff.hpp, with unit tests) wants all the strips the rows need, each within the file. - A square is written under a name of its own and renamed. - The squares are kept in the user's cache folder (nmt/grid1), as the orthophoto, since the game folder may not be writable; without one, in the game folder as before. The ones older builds kept there are moved over as each is asked for, a damaged one deleted. - Capabilities that didn't come aren't kept as the fallback name for the session: the next square asks again. * chore(editor): the http client said to serve the terrain model and the topo map too, the gif fix of stb_image marked local - CMake names the orthophoto, the terrain model and the topo map as what goes without libcurl. - The fix of the gif frame two back in stb_image is ours, not upstream's (v2.30 still has the old line): a comment at the line says so, for an update of stb_image to keep it. * fix(editor): the lines moved off the letters of the starters in a merged layer written once, not again with each save A merged layer's text goes into the file of its target on save, and the target is read again; the marked lines of the merged layer were dropped only for the marks the editor had changed. The lines moved to the new letters stayed with their old places, and the next save of the session wrote them into the target once more. - After a save, the marked lines of every merged layer are dropped; those of its target are read again from its file. - The lines of a dead layer aren't written again. - The selftest layermerge merges the layer of one file into another's, as the layers panel does. * feat(editor): the station as the signalling sees it, found from a switch of it, and its schematic editorStation: the switches joined by plain track no longer than 1.5 km, the tracks between them and the lines leading out, 400 m of each beyond the outermost switch; laid out as a schematic along the main track through the station. The track circuits, the signals and their lights, the lengths of the station tracks and the lines to the next stations are worked out from it for the signalling tool. Nothing uses it yet: the signalling tool, wired in the next commit, does. It builds on its own. * feat(editor): the signalling of a station in the Signalling tab, laid out from a switch of it as on the lines of PKP PLK LMB on a switch in the Signalling tab opens its station: the schematic in a window of its own, the name, the code, the line and the km of the station, and the steps of its signalling, each one step of undo: - the switches numbered along the station after its code, bpd_1, the parts of a slip bpd_15a..d; the drives and the objects naming a switch follow it, events written by hand keep the old names; - the tracks cut at the joints of the track circuits, Ie-4, and the circuits named, bpd_iz1, bpd_it1; - the entry, exit and shunting signals placed and named, A, F1, Tm1, from the templates chosen; - the signals of the lines out: the automatic block of three or four aspects, the block sections no shorter than the braking distance, or the semi-automatic one with a warning disc; block boundaries drawn by hand; - the lights each signal needs for its routes, Ie-1 and Ie-4 § 8, its template fitted to them; - the SHP track resonators the signals lack, rezonator.inc; - the lengths of the station tracks as a table, and what the station and its lines still lack, with Repair. The stations described are kept as //$s lines in the files of their layers. * fix(editor): the signals of a station and of its lines not placed with no template for a kind, no track cut for them first - Set the signals and Set the line signals cut the tracks first, and only then found no template for a kind. They stopped there, but the cuts stayed as a step of undo. Now they ask for the templates first, by the lookup signal_batch() uses (signal_template_for(), behind editor_signals::signal_templates_missing()). Without one nothing is cut. - Set the signals and Set the track circuits again under Track lengths had the ids of the buttons of the steps above them. ImGui flagged them when hovered. Each now has an id of its own. * fix(utilities): win1250_to_utf8 turns the polish letters into utf-8, not into themselves utilities.cpp starts with a byte order mark, so the compiler reads it as utf-8. The game's targets don't get /utf-8, though: set_target_properties(... COMPILE_OPTIONS ...) in the MSVC block of CMakeLists.txt replaces the options add_compile_options gave them. So the string literals went into the program in the code page of the system, windows-1250 on a polish one, and the map of win1250_to_utf8 turned each letter into itself. What read windows-1250 through it got no utf-8: the names, descriptions and categories of the sceneries and the names of the textures in the launcher, and the descriptions of the templates in the editor. The editor writes such a description back through utf8_to_win1250, which makes a question mark of each byte that doesn't start a utf-8 sequence, so the letters it had read unchanged didn't come back. The utf-8 sequences are written as bytes now, the way utf8_to_win1250 has them, so they don't depend on the options. The options stay as they are: with /utf-8 other literals of the files with a byte order mark would change, the "±" of the table of Bezogonkow would take two bytes and move the letters after it. The unit tests check the letters and that the text given is valid utf-8. (cherry picked from commit |
||
|
|
b1f2d0e3a1 |
feat(editor): the clips of the tutorial lessons, which the tutorial plays from lang/editor_tutorial
The lessons of looking around, laying, the curves, correcting a curve, joining, the switches, selecting and editing with the gizmo each name a clip, lang/editor_tutorial/<name>.gif. The editor tutorial that #289 brings plays them, but doesn't carry them: they were recorded on feat/switch-blades and stayed there. Taken from it as they are, 6.1 MB; the packages copy lang/ whole, so they go out with the game. Without them a lesson just shows no clip. |
||
| 154c42cb66 | Merge remote-tracking branch 'origin/feat/track-uneven' into feat/renderers-cleanup | |||
| 24b805b348 | Merge remote-tracking branch 'origin/feat/track-uneven' into feat/renderers-cleanup | |||
|
|
02abc7df0a |
feat(track): all of the unevenness in one attribute, with values for each path of a switch
Usage, before endtrack, in mm, 0-100, separated by semicolons with no spaces: a plain track: uneven value;up;side;cross;dip a switch: uneven p1-p2;p3-p4;up p1-p2;side p1-p2;up p3-p4;side p3-p4 uneven 18 the value alone uneven 18;;;25;6 with its own cross level and dip at the joints uneven 0;;30 sideways alone uneven 14;35 a switch, 14 on the straight path, 35 on the diverging What's left out takes the first number, the dip goes by the up and down one, and a path p3-p4 with no numbers of its own takes those of p1-p2. This replaces unevenup, unevenside, unevencross and jointdip. The fields in the editor stay, track panel, section Ride and sound. At the end they share, the paths of a switch keep to the lower value, and each comes to its own value along the way. Joined switches take the lowest of the same path, a path joined to another path the lower of the two, and a plain track comes to the value of the path it meets. See track_uneven_doc.md. |
||
|
|
e5266e1e6b |
feat(track): track unevenness declared in the track entry
Usage, optional attributes of a track entry, before endtrack:
uneven <mm> peak deviation of a rail on a 10 m chord, 0-100; normal and switch
unevenup <mm> up and down alone, instead of uneven; normal and switch
unevenside <mm> sideways alone, instead of uneven; normal and switch
unevencross <mm> cross level alone, instead of uneven; normal only
jointdip <mm> depth of the dip at rail joints, every sound distance; normal only,
default 0.4 of the up and down component
Values of uneven follow PLK Id-14 appendix 1: 6 mm is the limit at 160 km/h, 10 at 120,
18 at 80, 35 at 40; half of it for a track in a good state. Example:
uneven 18
unevencross 25
jointdip 6
endtrack
The same fields are in the editor, track panel, section Ride and sound. See
track_uneven_doc.md.
The unevenness is a displacement field over the plan of the scenery, with no random
numbers: one place strays the same every time, and joined tracks, the paths of a switch,
sleepermodel and axles at one place move together. Tracks meet at a joint at the lower of
their values. Joined switches take the lowest of theirs, the tracks joined to them come to
it, and a track with none of a component keeps the switch to its design in it. The clatter
comes from the dipping joints. Curve radius and grade for the physics stay as designed.
Tracks with it get geometry every 2 m on straights: 4x the vertices on Baltyk with all
tracks flagged, 0.2 ms more per frame on td.scn.
|
||
| 765153ad91 | Merge remote-tracking branch 'origin/feat/switch-blades' into feat/renderers-cleanup | |||
|
|
80379b991c | feat(editor): the work of the editor sessions not committed yet, as it stands: a curve traced on from the end of the diverging track of a switch goes on at its radius with no transition in, or from a straight right at the switch (alignment start_held, fit_going_on), the plan taking an end adjoining R 10 km or more for a straight; the switches and slips laid into curves, slid along them and laid alone on one straight (frame_path, switch slide); the route plan reading curves going on from the tracks adjoining, the kept designs taken or forgotten; the orthophoto and terrain model settings, downloads and layers, the tracks onto the terrain; the curvature of a path in the plan (bezier::plan_curvature); the Polish texts of all of it. Not built as committed | ||
|
|
2eda26b94c | feat(editor): a warning of the sudden change of the cant deficiency right behind a switch, as ST-T1-A6 sees it (9.11): a track laid on from the end of the diverging track of a switch, or into it, is checked by switch_curve::check_exit from the end of the curve of the switch, a straight frog's length before its end, to the first sudden change of the curvature of the track laid. Two of them nearer than the intermediate element of table 9.16 (6 m in track connections up to 60 km/h) are taken together, else each one alone, against table 9.15 (130 mm up to 60 km/h), at the speed of the laying or of the diverging track of the switch, the lower one. The view tells of it by the cursor while the track is extended or laid, the status once it's laid; a transition out of the frog straight makes no sudden change. Selftest: from a Rz S42-190-1:7,5 with a frog straight of 1.66 m a curve the other way of R 200 m warned of 194 mm together, the same way none; from a Rz 60E1-190-1:9 with 6.09 m a curve the other way of R 200 m none, of R 120 m warned of 157 mm | ||
|
|
667e433af9 | feat(editor): a slip is selected, slid and deleted whole: any track of it picked shows all of it selected, editor_mode::slip_of finding its switches by its record, the tracks between them and its four ends. Dragged along, the slip moves along its first track with the straights out to the joints of its template and its crossing track, as far as that one goes on into tracks with their ends free, the straights of its first track before it and past it lengthened and shortened, a metre of them kept; one bent into a curve isn't slid, nor one whose crossing track is joined on beyond it. Deleted, it leaves its two tracks crossing from end to end in its place, kept in the scenery as a crossing Skrz, as a switch leaves its main track; Shift+Del takes all of it, Ctrl+Z brings it back. Selftest: a Rkp laid with its crossing track slid 5 m on and 3 m back, the joints of its template with it, walked through; deleted into a crossing Skrz 1:9 walked through, back with Ctrl+Z; a Rkpd at a crossing of straights with free ends slid 2 m, deleted into a crossing | ||
|
|
7b11db566e | feat(editor): a slip Rkp or Rkpd bent into a curve of a side track: dragged on a curve with a slip armed it's laid out on the tangent to the curve where it was pressed and bent onto the curve as a switch laid into one is, editor_mode::frame_path laying a path of a template into the curve for both, its crossing track coming along with its ends free, ahead to the side of the drag, the slip curve of a single slip on that side, the straights of both tracks out to the joints of its template. A crossing goes only where two straights cross, a curve as sharp as the slip curves is refused. As it's dragged the view tells the radii of its tracks and slip curves, its cant and what switch_curve::check_slip says, the 11.4 pkt 4b of ST-T1-A6 among it; laid, the status the same. A slip bent into a curve isn't replaced by one laid out of straights. Selftests switchcurve, bladetips: a Rkpd 49E1-190-1:9 in R 800 m with its slip curves of R 154 and 249 m and the warnings of 11.4 pkt 4b and table 9.2, one of R 300 m in R 800 m with no warning of table 9.2, a Rkp in R 4000 m, the blades from 1.248 m on all of them; refused in R 150 m, a Skrz refused | ||
|
|
7f6a8736ca | feat(editor): a slip goes only where the straights cross at the skos of its template: a Rkpd 1:9 was laid at a crossing of 1:7 or 1:14 as well, shaped for the angle of the tracks there into no slip of the catalogue. The straights crossing at a skos more than 0.14 deg off it, half of what keeps 1:9.51 and 1:10 apart, are refused with the skos they cross at and the slip of the same kind made for it, of the same rail and radius first, or none; a double slip replaced by one of another skos likewise. The panel and the hints say the slip goes at its skos. Selftest: a Rkpd 49E1-190-1:9 laid at 1:9 and 1:9.08, refused at 1:7 with no template for it and at 1:9.51 with Rkpd S42-230-1:9,51 fitting | ||
|
|
f8a12107a0 | feat(editor): a switch laid with no track there, and no switch laid by a click: a press on the ground with a switch armed lays the switch there, its start where it was pressed, the direction of its main track taken from the drag once it's 4 m long and held, the drag sideways then giving the side of the diverging track, back by the start the direction free again; pressed by a free end within 5 m it goes on from that end in its direction and grade, joined to it. Its ends are left free to lay on from, styled after the track it goes on from or as the lay tool lays its tracks (editor_track::create_switch with a path_style). A press let go within 10 pixels places no switch, a slip at a crossing included, which was laid at once on the press: it's laid once dragged, its straights shown meanwhile. The hints and the panel tell of both. Selftest switchfree: Rz 60E1-300-1:9 on the ground with its four ends free, from the free end of a straight joined and walked through; a click on a straight laid none, a drag laid z1 | ||
|
|
ef592e6479 | feat(editor): the drive of a switch stands by the tips of its blades, not at the joint before them, and goes with the switch deleted. A drive placed, changed or carried along with its switch is set where the blades begin, as they're shaped or where the diverging track is broken at the tip of a planed blade, along the main track there, its heading and its tilt taken there; the drives the earlier versions of the editor set at the joints are moved there once, as the scenery is opened and the templates are known, with no step of the undo history, to be saved with it. Deleting a switch, a double switch or a set of tracks takes the drives of the switches along in the same step, Ctrl+Z brings them back. The joint before the blades and the tips of the blades of the switch being placed or the one selected are marked across the track in the view, so the tips seen on the photo aren't taken for the start of the switch. Selftests bladetips, drivetips; on a copy of test42 the drive of z1 went from the joint to 1.248 m, deleted with z1, back with Ctrl+Z | ||
| e19c788f30 | Catenary as plain node entries in scenery files | |||
| d794b1e736 | Catenary editor: keep catenary parts out of node editing, pick and drag anchor poles | |||
|
|
aed2cfad2c | feat(editor): a track deleted cuts the design kept for its line down to the tracks left along it, in the same step of the undo history: a design keeps the stretch of its line it stands for (//$h kept <from> <to>), a track deleted in the middle parts it in two, one at an end shortens it, a design with no track left is forgotten. The geometry stays as designed, only its reach changes. A design cut down isn't taken whole by the route plan nor merged with a new one nor carried along by a switch slid, and gives no designed curve to the tracks left of a curve it cut, which are recognized as they lie: a track laid by hand into the gap is never pulled back to the old shape. The status tells of it. The //$h click lines are the editor's own now: read back with their design, and written once on save instead of staying behind and piling up. Selftests on a copy of wgr.scn: a track of a compound curve deleted in the middle, undone and redone, one at an end, all of a piece, saved and read back | ||
|
|
eb3d3eb1e0 | feat(editor): in the mode of the straights the line from the end of the diverging track of a switch begins with a straight right at P4, the curvature jumping as at the start of the switch, a bend clicked getting its own curve where it was clicked; only a curve traced from P4 goes on with the curve of the switch. Dragged from a free end the shape follows the mode of laying: a straight in the one of the straights, from P4 right from its end, an arc and a straight in the one of a curve (Tab), from P4 the curve of the switch going on; the four shapes to pick under More settings and with Shift+wheel are gone, which only muddled the two ways of laying. Shift+wheel picks the way of joining over another free end. The hints, the readout by the cursor and the table of the keys say so. Selftests of P4: a straight of 100 m and of 15 m laid right from P4, bends of 8 degrees either way after a straight, dragged straight; traced and joined from P4 the curve of the switch goes on | ||
|
|
d6df785b78 | feat(editor): the download area drawn on the topo map: a polygon is the boundary of what the editor downloads, the orthophoto and the terrain model alike. Drawn from the settings of the orthophoto (Download area, Draw on the map, the top view on): a click puts a point, a point dragged moves, Shift+click removes it, Backspace takes the last one back, Enter closes the area, Esc gives up; it's kept in the scenery as //$a lines in PUWG 1992, so it stays on the ground when the origin moves. Inside it everything the settings ask for, the standard imagery, the 4K one where it's ticked and covers the place, the squares of the terrain model where the scenery has its terrain, goes to the disk cache in the background, nothing decoded nor uploaded, only while no tile around the camera waits and not while the scenery is driven, with its progress, Pause and Retry under it; outside it nothing is asked for, around the camera, along the tracks or ahead of the laying, nor shown. The workers of the orthophoto are 8, at most 3 of them on the tiles around the camera, each holding an image decoded, the rest downloading the area. The 4K tiles: an image the tile no longer wants once it comes, as a 4K one asked for before the camera moved on, isn't uploaded (the 64 MB and the mipmaps of it), nor decoded where a newer job of the tile waits; no two jobs of one tile run at once; a standard tile coming blank twice is remembered by a .blank file, not downloaded again on each return; a 4K tile is uploaded only in a frame with no other upload. Selftests orthoarea, orthostats, orthohires, orthoareapause; unit tests of the tiles a triangle, a concave polygon, a thin band and a polygon about a corner touch (geometry::squares_in, square_touches) | ||
| 5f93c7c20d | Catenary editor: save the catenary by the active layer | |||
| 2321180051 | Catenary editor: Iet-107 zigzag, span counter and step, cantilever swaps, movable anchors | |||
| 550d47e97c | Merge remote-tracking branch 'jano211/siec-radio' into feat/renderers-cleanup | |||
|
|
619f048f31 |
Sieć trakcyjna: kotwienia, kotwienie środkowe, parasole i wysięgniki rozstawione, konsole 4890/4690
Sam kod exe z gałęzi siec-trakcyjna od poprzedniego commita (bez testów, notatek i danych z tests/catenary). Dane (data/traction_*.txt) leżą poza repozytorium. - kotwienia ciężarowe i stałe (0404/0405, przewody zakotwione osobno, sieci bez własnych danych: network <symbol> as <kod>) - kotwienie środkowe 0406/0408/0418/0416: lina, V i zaciski na linie nośnej liczonej jak przęsło, obejma 4160 na teownikach - parasole i wysięgniki rozstawione na konsolach 4890, wysięgi pomocnicze 0167 na belkach 4690, trzeci wysięgnik w osi słupa, lina nośna z innego wysięgnika (messenger_from) - przęsła w nietypowych sytuacjach nie przechodzą na stary wygląd (bez Y, bez wieszaków, lina nad przewodem) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01GfTogWDsfCE8RGFGvm2eyp |
||
|
|
a0427bb80b | feat(editor): from the end of the diverging track of a switch the line laid always goes on with the curve of the switch: a straight or a bend the other way after P4 begins with the transition out of the curve of the switch, as after a plain track on a curve, never with a jump of the curvature, whether laid through points, traced, dragged in the straight layout or joined to another free end. The transition is the one for the speed the curve of the switch allows with no cant (about 48 km/h at R 300, so 20 to 30 m), not for the speed of the line. A straight with no bend clicked on from such an end runs on the way the transition leaves, as far as the point clicked, not along the tangent at the end, which left no room for the transition. Where no transition fits, as for a straight shorter than it, nothing is laid and the status says why | ||
|
|
f83a1a0cd2 | feat(editor): the tracks onto the terrain from the terrain panel too: the terrain model (F5 Terrain) has a step 3, Tracks and terrain, with Tracks onto the terrain, the one to take first, big, what it does told under it (all the tracks go down or up onto the model, loaded along them by itself), then, after "Or:", Only the ones not fitted and Terrain under the tracks, each with a line of the case it's for; the same block stays in the panel of the tracks, under All the tracks of the scenery, with a line saying where the scenery is put on the map while it isn't. The progress of these is shown at step 3, the loading buttons of step 2 greyed meanwhile. The terrain lesson of the tutorial tells of step 3 so | ||
|
|
79a8c13586 | fix(editor): a track bent by its second control vector is drawn bent: the straightening of a straight with control vectors (world/Track.cpp) checked the first vector twice, so with it left along the straight the second one, dragged with the gizmo, changed the data but not the track drawn; now a straight only where both vectors lie along it or aren't given. A track bent by hand into an S between two points dragged is labelled with its length (L 77 m), not with a radius of many kilometres read off it; the "K: split here" by the cursor isn't shown while a point is dragged; Ctrl+Z takes away the warning by the cursor of what it took back (the paths that left the kept design). The tutorial clips of editing recorded again: selecting and fixing without the gizmo (a joint dragged, the warning read, Ctrl+Z), and the new one of editing with the gizmo (Q, a control vector dragged bending the track, W, E) | ||
|
|
a312fd9935 | feat(editor): with the gizmo hidden a track is changed by its ends only: its control vectors are neither drawn nor caught until Q, W, E or the buttons above the view bring the gizmo out, so a track selected won't bend by chance; the hints say what dragging an end does (a joint: the neighbours follow, a free end: a new track out of it, with Ctrl it moves). The tutorial has a lesson of its own for editing with the gizmo, after the one of selecting and fixing, which no longer speaks of it: the arrows, the rings, the handles, the control vectors, a point clicked, Ctrl and Esc, ticked off when the gizmo is out and a track bent or moved with it; thirteen lessons. Also puts back in place two lines of the band of the curvature which dd64b821 committed out of their place (the arc declared inside the loop, so that commit didn't compile) | ||
|
|
97b6a84d1b | fix(editor): a curve laid from a free end on a curve, or to one, goes on from its curvature: traced (Tab) from the end of the diverging track of a switch it begins right at P4 at the radius of the switch, not on a straight nor with a transition from a curvature of 0. The design of the line takes the curve of the adjoining track at each end (start_curved/end_curved with the radius, the side and the cant, kept with it in the scenery): the curve of the first vertex turning its way, or of the last one, begins right at the end, its transition going from that curvature and cant to those of its first arc, as between the arcs of a compound curve, none where it goes on at its radius; the radius of its arcs is the one which begins it there, solved for the tangent, the curves next to it making room on the straight. A curve traced next to such an end is fitted by its transitions alone, with none between the curves where the points keep to that as well, or laid from a straight there where it doesn't go on from it or that keeps to the points much closer: eased out of the curve of a plain track by the transition of the norms, the line beginning at its end, or right from P4, as a switch goes on with a straight. A bend of straights turning the way of the curve gets its curve going on from it with the transitions and the cant of the norms; the other way, or a straight, as before: eased out of the curve of a plain track, the jump of the curvature kept at a switch, as at its start, and not warned of. The cant of the adjoining track goes on into the curve with no ramp at that end; the norms ask for the transition between the curves only where the curvature differs by more than 5 % or the cant by 5 mm. The readout by the cursor, the status after laying and the plan tell the curve going on from the track, the plan with a box to go on or not. Dragged back to P4 from a point the curve goes on from its radius too. Selftests laywalk, laybends, curvejoint, endcurves; unit tests of a curve going on from a switch and into a free end, its cant, traced, through a transition into a larger radius, and of a bend of straights after such an end | ||
|
|
91900a0ead | fix(editor): the band of the curvature edits each arc of a compound curve: its arcs, elements of an even curvature, were taken for nothing to drag, and any change went to the first radius; now the plateau of an arc changes its own radius, a ramp between two arcs the transition between them, the ends of a plateau the transitions either side of it, by a drag or the wheel, the tooltip and the value shown while dragging naming the arc. The tutorial shows the correcting of a compound curve in a clip recorded in the editor in place of the drawing: the plan of the curve opened, the plateau of R2 dragged from 138 to 174 m, the line applied to the scenery | ||
|
|
cb766dabb4 | feat(editor): the top view labels each curve once and each row of straights in line once, not each of their paths: a curve, from its first transition to its last, with the radius of its arc, of each arc of a compound one, its transitions and its cant (each arc's where they differ), as the plan reads it and as the laying shows it, in the middle of it; a straight row with its whole length. A piece of a transition curve no longer shows the radius of the arc as its own. The tutorial clips recorded again with them, in the top view: laying, the curves with a compound one traced (R 300/150) after the bend too sharp for the speed, a track selected with no gizmo, its control vector dragged and taken back, and the switches: one put into a track, a crossover between two tracks and a switch ladder laying its fan; the lessons of the curves and of the switches tell of the compound curve, the crossovers and the ladder | ||
|
|
bbb3e9e61e | feat(editor): laying and editing the track as a beginner meets them: the points clicked and not laid yet named at the top of the panel with Lay (Enter) and Drop the points, Enter shown by the bar at the bottom while there are some, and a first Esc over them only warning, the second one dropping them; the readout by the cursor kept in the 3d view, on the other side of the cursor where the view ends, with only the first warning of a curve and how many more the panel lists; the grid, the labels and the lines drawn over the view no longer seen through the docks; the gizmo in the tracks hidden until Q, W or E or its buttons above the view bring it out, an arrow there hiding it again, so a selected track isn't moved by chance; the radius of the curves at the bends headed so in the panel, the laid line told in metres and pieces, the hints of the select tool and of a straight shifted around an obstacle translated. An empty scenery opens facing north, the top view with the north up as the compass and the orthophoto have it (on LK2 Warszawa Wschodnia left, Rembertow right). The tutorial tells the laying as it works now: the bends clicked and Enter, the curves made at them and orange where too sharp for the speed, Tab for a curve traced, the radius by Ctrl+wheel when joining, the gizmo by Q W E, the terrain model loaded and fitted from the panel of the tracks, signals by I; its texts wrap to a dock it's put in, new clips of laying and of the curves, recorded with the selftest badge drawing the mouse or the key in use; the empty scenery and the shortcuts say the same | ||
|
|
e43863932d | feat(editor,track): a cant ramp of its own, off the transition curve: each end of a curve may have its ramp moved and of a length of its own (ST-T1-A6 9.6 pkt 5 and 11), on the straight before the curve or on the arc, the transition keeping the full cant all along, as a switch laid on it wants it; set in the plan under "Cant ramps", stored with the vertex as "ramps", reversed with the curve, marked across the track in the view. The cant of a line is a profile along it now, the paths cut where a ramp of its own starts and ends, their rolls following it, warnings where a ramp is shorter than its cant asks for or reaches into the curve before, past the line or over the other ramp. A switch on a cant ramp is drawn following it: its rails, blades, frogs and bed made at the mean of its rolls, as before, are turned along each path to the roll of the path there, so it no longer steps at its ends against the tracks either side. The checks of a switch laid into a curve warn of the values of table 11.9 in brackets as of the others, with no word of a consent. Unit test of a ramp moved onto the straight | ||
|
|
ece61056ff | feat(editor): a switch laid into a curve is checked by ST-T1-A6 as it's placed: the radii of its main and diverging tracks at its start and its end shown at it; warnings where the curvature of a track turns from one side to the other within it (KZW II, 9.7 pkt 12), where the diverging track is sharper or the main track bent more than table 11.9 allows the basic switch (the values allowed by way of exception named), where a switch of 1:9.403 or steeper is bent (11.4 pkt 4), where the cant changes within it (11.4 pkt 7), where a cant ramp starts or ends within it or under 6 m off it (9.6 pkt 16-17) and where the cant is over 100 mm (table 9.6); a note on a transition curve, which only an exception allows. The ends of the cant ramps are marked on the curve, and the start of the switch pressed within 3 m of where it starts or ends at an end of a ramp, or keeps the 6 m off it, is drawn there. The warnings stay in the status once it's laid. The checks stand on their own in editor/editorSwitchCurve, with unit tests | ||
|
|
aeef2cebb3 | feat(editor): the plan shows which curve is edited: each named W1, W2... as its vertex is in the view, with its km and "Show in the view", which flies the camera over it; the part of it whose field the mouse is over or which is being edited (the whole curve, an arc of a compound one, the transition in, out or between two arcs) lit up in the view and named there with its radius, cant or length. The points clicked when a line is laid are kept with its design in the scenery ("click" lines, moved with it): the plan shows them in the colours of their departure and, while "Keep to the points clicked" is on, fits the radii of a curve whose transitions or cants are changed again to them, its transitions and cants as set; "Transitions for these cants" makes the transitions as long as the norms ask for at the radii and the cants set, an arc of a compound curve with no cant lengthening the ones either side of it. Unit test: 50 m between the arcs become 85 m, the curve 4 cm off the points clicked instead of 58 | ||
|
|
2a399a92a5 | feat(editor): each arc of a compound curve has a cant of its own, set in the Plan by each radius ("Cant of R1 (mm)"...), ramped along the transition curves between the arcs; until it's set, the cant of the curve in proportion to the curvature of the arc, as before, "auto" taking it back to that and "Apply recommended for V" all of them. The transitions between the arcs of the norms follow the cants set; warnings where the cant of an arc exceeds the norms, where the unbalanced acceleration does on any arc, and where a transition curve, at the ends or between the arcs, is shorter than the change of the curvature and of the cant along it needs. The labels of the curves show the cants of the arcs where they differ. Stored with the vertex as "cants", reversed with the curve; a unit test | ||
|
|
133ba9cb45 | fix(editor): the heights from point to point broke the grade only at the bends of straights which stay bends, a curve traced or bends clicked close along a curve going at one grade from one of its ends to the other, attached there; and two tracks laid no longer meet at two heights where a point was clicked within 5 m of their joint, each end of a piece not cut there taking the height of its own stretch, not of the one the middle of the piece lies on (steps of 0.6 m on a steep grade in abc). Unit tests of the heights from point to point | ||
|
|
6bd3d4d19f | feat(editor): laying from the photo in two modes, Tab switching them in one row of points: the points clicked as bends of straights, eased with two transition curves meeting with no cant, of 3000 to 6000 m set in the panel, or with an arc of the norms where they don't fit; or the points along the middle of a curve seen on the photo, the last two on the straight after it, a curve, compound or two with a straight between them, fitted to them with its radii and its transitions. The points clicked are kept where they are, a curve below the norms laid with its warnings in the colour of one; the line shown as the points are clicked, laid by Enter in one step of the undo and going on from its end, Backspace taking the last point back, Esc dropping the points not laid. A bend after a free end or a curve traced goes along its straight, dashed; the curves labelled with their radii, transitions, cant and speed, the straights with their lengths, the points traced in the colour of how far the line is from them, the curves of the line listed in the panel. The Plan sets two transition curves with no arc for a vertex. Selftests laymode, layradius, laytrace, layp, layreport, layenter, layback, laycancel, laysample | ||
|
|
dcaf48d7b6 |
feat(editor): the editor knows which tracks have their grade line fitted: a grade line applied, fitted to the terrain model or with the profile, marks its tracks with the shape they have, kept in the scenery files as //$f lines; a track changed since, by hand, by K or taken back, isn't fitted any more. The terrain of the tracks in the panel of the tracks tells how many of the selected ones are fitted, and puts onto the terrain all the tracks or only the ones not fitted, these meeting the fitted ones as they are, the scenery not moved
Selftests: nmtauto [unfitted], fittedstate [reload]. |
||
|
|
59c3458173 |
feat(editor): the terrain model in the field of work of the terrain only loads and keeps the model: its place, Load along the tracks or around the camera, the band, the offset of the heights, the progress and the faults, with no choice of what gives way; the tracks and the terrain are fitted to each other in the panel of the tracks. In a scenery with its terrain made from the model the terrain grows around the camera too, not only ahead of the laying; the chunks the growing gave up are not asked for again
The terrain follows the edits of the tracks with a formation only: a track with none is not shaped on its own any more, nor after the chunks made around it, and the formations are laid after a load only when the tracks are put onto the terrain or the terrain under them. |
||
|
|
7d0caee541 |
feat(editor): the terrain of the tracks in the panel of the tracks: Draw the terrain to the track, of the selected tracks or of their whole run, Restore the terrain, each one step of the history, the terrain following the tracks edited or not, and Tracks onto the terrain and Terrain under the tracks for all the tracks of the scenery
The formation of a track as it is already was taken out of the terrain when the track was shaped again, as after a change of its properties alone: the formations the tracks still have are no longer counted as gone. Selftest trackterrain pull|restore <tracks>. |
||
|
|
11d1342181 |
feat(editor): an end of a track dragged, and an end of a straight dragged by its handle, goes onto the ground at the height of the ballast, as a point laid; with Shift held it keeps its height
Selftest trackends: the ends of a track against the ground under them. |
||
|
|
9625b4b3d9 |
feat(editor): K on a track is a break of the grade, as a point of a road: the track split at the cursor, the point between the two at the height of the ground and the ballast there, each of them an even grade from its other end up to it
Selftest kbreak: K on the track nearest a point, logs the joint against the ground. |
||
|
|
641619e13f | feat(editor): the point of a track laid where there's no terrain yet, as over the base map of the top view, takes the height of the terrain model with the offset of the scenery and the ballast, the model under the cursor asked for while laying; the fitted heights of the laying called a smoothed grade line in Polish | ||
|
|
2ae10f5901 | feat(editor): the chunks waiting for the terrain model and the tiles of the orthophoto asked for and not shown yet outlined on the ground where they will be, pulsing, blue and orange, named where the name fits: at the heights of the terrain beside them or of the model, else level with the nearest chunk or track | ||
|
|
336c940c28 |
fix(editor): laying leaves the terrain as it is: the track takes from the ground only the heights of the points clicked, from point to point by default, and no formation is led into the terrain after it, nor after a track dragged from a free end; the terrain made from the model never makes a chunk there is anew, made from the model or by hand, edited or not, only the missing ones, the formations laid anew as the tracks lie
The terrain under the tracks and the end of Tracks onto the terrain took every chunk along the tracks away and made it again from the model, the changes made by hand with them (79 chunks on test2). The heights while laying are kept under a key of their own, so the fitted ones chosen when they were the default are left behind; fitted stays a choice. |